ieee80211_netbsd.h revision 1.21.2.9
1 /* $NetBSD: ieee80211_netbsd.h,v 1.21.2.9 2019/06/10 22:09:46 christos Exp $ */ 2 3 /*- 4 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 5 * 6 * Copyright (c) 2003-2008 Sam Leffler, Errno Consulting 7 * All rights reserved. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 19 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 20 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 21 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 22 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 23 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 24 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 25 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 26 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 27 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 28 * 29 * $FreeBSD: ieee80211_freebsd.h$ 30 */ 31 #ifndef _NET80211_IEEE80211_NETBSD_H_ 32 #define _NET80211_IEEE80211_NETBSD_H_ 33 34 #ifdef _KERNEL 35 #include <sys/param.h> 36 #include <sys/systm.h> 37 #include <sys/atomic.h> 38 #include <sys/cprng.h> 39 #include <sys/lock.h> 40 #include <sys/mbuf.h> 41 #include <sys/malloc.h> 42 #include <sys/mallocvar.h> 43 #include <sys/mutex.h> 44 #include <sys/rwlock.h> 45 #include <sys/sysctl.h> 46 #include <sys/workqueue.h> 47 48 // #include <net80211/_ieee80211.h> 49 50 #include <net/if.h> 51 52 /* 53 * Defines to make the FreeBSD code work on NetBSD 54 */ 55 56 #define PI_NET IPL_NET 57 #define EDOOFUS EINVAL 58 #define IFF_PPROMISC IFF_PROMISC 59 60 #define __offsetof(type, field) __builtin_offsetof(type, field) 61 #define arc4random cprng_fast32 62 #define atomic_subtract_int(var,val) atomic_add_int(var,-(val)) 63 #define caddr_t void * 64 #define callout_drain(x) callout_halt(x, NULL) 65 #define m_catpkt(x,y) m_cat(x,y) 66 #define mtx_lock(mtx) mutex_enter(mtx) 67 #define mtx_unlock(mtx) mutex_exit(mtx) 68 #define mtx_owned(mtx) mutex_owned(mtx) 69 #define mtx_destroy(mtx) mutex_destroy(mtx) 70 #define mtx_sleep(a1, a2, a3, a4, a5) /* NNN not sure what it should be. */ 71 #define nitems(x) (sizeof((x)) / sizeof((x)[0])) 72 #define ovbcopy(dst,src,size) memmove(dst,src,size) 73 #define ticks hardclock_ticks 74 75 /* 76 * task stuff needs major work NNN! 77 */ 78 79 typedef void task_fn_t(void *context, int pending); 80 81 // NNN use more standard feature for getting pointers from fields ...??? 82 struct task { 83 struct work t_work; /* Must be first so we can cast a work to a task */ 84 task_fn_t *t_func; 85 void *t_arg; 86 kmutex_t t_mutex; 87 int t_onqueue; 88 const char *t_func_name; 89 }; 90 91 struct timeout_task { 92 struct task to_task; /* Must be first so we can cast to a task. */ 93 struct workqueue *to_wq; 94 callout_t to_callout; 95 int to_scheduled; 96 }; 97 98 99 static __inline int dummy(void); 100 static __inline int dummy(void) { return 0; } 101 102 void ieee80211_runwork(struct work *, void *); 103 void taskqueue_enqueue(struct workqueue *, struct task *); 104 void taskqueue_drain(struct workqueue *, struct task *); 105 106 int taskqueue_enqueue_timeout(struct workqueue *queue, 107 struct timeout_task *timeout_task, int nticks); 108 int taskqueue_cancel_timeout(struct workqueue *queue, 109 struct timeout_task *timeout_task, u_int *pendp); 110 void taskqueue_drain_timeout(struct workqueue *queue, 111 struct timeout_task *timeout_task); 112 113 /* NNN ---- Need to add a way to mutex_destroy at the right time. */ 114 115 #define TASK_INIT(var, pri, func, arg) do { \ 116 (var)->t_func = func; \ 117 (var)->t_arg = arg; \ 118 mutex_init(&(var)->t_mutex, MUTEX_DEFAULT, IPL_SOFTNET);\ 119 (var)->t_onqueue = 0;\ 120 (var)->t_func_name = #func; \ 121 } while(0) 122 123 #define TIMEOUT_TASK_INIT(queue, task, pri, func, arg) do { \ 124 (task)->to_task.t_func = func; \ 125 (task)->to_task.t_arg = arg; \ 126 mutex_init(&(task)->to_task.t_mutex, MUTEX_DEFAULT, IPL_SOFTNET);\ 127 (task)->to_task.t_onqueue = 0;\ 128 (task)->to_task.t_func_name = #func; \ 129 (task)->to_wq = queue;\ 130 callout_init(&(task)->to_callout, CALLOUT_MPSAFE);\ 131 (task)->to_scheduled = 0;\ 132 } while (0) 133 134 #define taskqueue workqueue 135 #define taskqueue_free(queue) workqueue_destroy(queue) 136 137 #define taskqueue_block(queue) /* */ 138 #define taskqueue_unblock(queue) /* */ 139 140 /* Other stuff that needs to be fixed NNN */ 141 #define priv_check(x,y) 0 142 143 /* Coult it be this simple? NNN */ 144 #define if_addr_rlock(ifp) IFNET_LOCK(ifp) 145 #define if_addr_runlock(ifp) IFNET_UNLOCK(ifp) 146 147 /* VNET defines to remove them ... NNN may need a lot of work! */ 148 149 #define CURVNET_SET(x) /* */ 150 #define CURVNET_RESTORE() /* */ 151 #define CURVNET_SET_QUIET(x) /* */ 152 153 /* counters */ 154 typedef uint64_t counter_u64_t; 155 #define counter_u64_free(x) /* */ 156 #define counter_u64_fetch(x) x 157 #define counter_u64_alloc(x) 0 158 159 typedef enum { 160 IFCOUNTER_IPACKETS = 0, 161 IFCOUNTER_IERRORS, 162 IFCOUNTER_OPACKETS, 163 IFCOUNTER_OERRORS, 164 IFCOUNTER_COLLISIONS, 165 IFCOUNTER_IBYTES, 166 IFCOUNTER_OBYTES, 167 IFCOUNTER_IMCASTS, 168 IFCOUNTER_OMCASTS, 169 IFCOUNTER_IQDROPS, 170 IFCOUNTER_OQDROPS, 171 IFCOUNTER_NOPROTO, 172 IFCOUNTERS /* Array size. */ 173 } ift_counter; 174 void if_inc_counter(struct ifnet *, ift_counter, int64_t); 175 176 #define if_get_counter_default(ipf,cnt) \ 177 (cnt == IFCOUNTER_OERRORS ? ipf->if_oerrors : \ 178 (cnt == IFCOUNTER_IERRORS ? ipf->if_ierrors : 0 )) 179 180 #define IF_LLADDR(ifp) (((struct ieee80211vap *)ifp->if_softc)->iv_myaddr) 181 182 /* Scanners ... needed because no module support; */ 183 extern const struct ieee80211_scanner sta_default; 184 extern const struct ieee80211_scanner ap_default; 185 extern const struct ieee80211_scanner adhoc_default; 186 extern const struct ieee80211_scanner mesh_default; 187 188 /* 189 * Sysctl support??? NNN 190 */ 191 192 #define SYSCTL_INT(a1, a2, a3, a4, a5, a6, a7) /* notyet */ 193 #define SYSCTL_PROC(a1, a2, a3, a4, a5, a6, a7, a8, a9) /* notyet */ 194 #undef SYSCTL_NODE 195 #define SYSCTL_NODE(a1, a2, a3, a4, a5, a6) int a2 __unused 196 197 /* another unknown macro ... at least notyet */ 198 #define SYSINIT(a1, a2, a3, a4, a5) /* notyet */ 199 #define TEXT_SET(set, sym) /* notyet ... linker magic, supported? */ 200 201 /* 202 * FreeBSD code uses KASSERT but different from NetBSD so ... 203 */ 204 #define FBSDKASSERT(_cond, _complaint) \ 205 do { \ 206 if (!(_cond)) \ 207 panic _complaint; \ 208 } while (/*CONSTCOND*/0) 209 210 /* 211 * Common state locking definitions. 212 */ 213 typedef struct { 214 char name[16]; /* e.g. "ath0_com_lock" */ 215 kmutex_t mtx; 216 } ieee80211_com_lock_t; 217 #define IEEE80211_LOCK_INIT(_ic, _name) do { \ 218 ieee80211_com_lock_t *cl = &(_ic)->ic_comlock; \ 219 snprintf(cl->name, sizeof(cl->name), "%s_com_lock", _name); \ 220 mutex_init(&cl->mtx, MUTEX_DEFAULT, IPL_SOFTNET); \ 221 } while (0) 222 #define IEEE80211_LOCK_OBJ(_ic) (&(_ic)->ic_comlock.mtx) 223 #define IEEE80211_LOCK_DESTROY(_ic) mutex_destroy(IEEE80211_LOCK_OBJ(_ic)) 224 #define IEEE80211_LOCK(_ic) mutex_enter(IEEE80211_LOCK_OBJ(_ic)) 225 #define IEEE80211_UNLOCK(_ic) mutex_exit(IEEE80211_LOCK_OBJ(_ic)) 226 #define IEEE80211_LOCK_ASSERT(_ic) \ 227 FBSDKASSERT(mutex_owned(IEEE80211_LOCK_OBJ(_ic)), ("Lock is not owned")) 228 #define IEEE80211_UNLOCK_ASSERT(_ic) \ 229 FBSDKASSERT(!mutex_owned(IEEE80211_LOCK_OBJ(_ic)), ("Lock is owned")) 230 231 /* 232 * Transmit lock. 233 * 234 * This is a (mostly) temporary lock designed to serialise all of the 235 * transmission operations throughout the stack. 236 */ 237 typedef struct { 238 char name[16]; /* e.g. "ath0_tx_lock" */ 239 kmutex_t mtx; 240 } ieee80211_tx_lock_t; 241 #define IEEE80211_TX_LOCK_INIT(_ic, _name) do { \ 242 ieee80211_tx_lock_t *cl = &(_ic)->ic_txlock; \ 243 snprintf(cl->name, sizeof(cl->name), "%s_tx_lock", _name); \ 244 mutex_init(&cl->mtx, MUTEX_DEFAULT, IPL_SOFTNET); \ 245 } while (0) 246 #define IEEE80211_TX_LOCK_OBJ(_ic) (&(_ic)->ic_txlock.mtx) 247 #define IEEE80211_TX_LOCK_DESTROY(_ic) mutex_destroy(IEEE80211_TX_LOCK_OBJ(_ic)) 248 #define IEEE80211_TX_LOCK(_ic) mutex_enter(IEEE80211_TX_LOCK_OBJ(_ic)) 249 #define IEEE80211_TX_UNLOCK(_ic) mutex_exit(IEEE80211_TX_LOCK_OBJ(_ic)) 250 #define IEEE80211_TX_LOCK_ASSERT(_ic) \ 251 FBSDKASSERT(mutex_owned(IEEE80211_TX_LOCK_OBJ(_ic)), ("lock not owned")) 252 #define IEEE80211_TX_UNLOCK_ASSERT(_ic) \ 253 FBSDKASSERT(!mutex_owned(IEEE80211_TX_LOCK_OBJ(_ic)), ("lock is owned")) 254 255 /* 256 * Stageq / ni_tx_superg lock 257 */ 258 typedef struct { 259 char name[16]; /* e.g. "ath0_ff_lock" */ 260 kmutex_t mtx; 261 } ieee80211_ff_lock_t; 262 #define IEEE80211_FF_LOCK_INIT(_ic, _name) do { \ 263 ieee80211_ff_lock_t *fl = &(_ic)->ic_fflock; \ 264 snprintf(fl->name, sizeof(fl->name), "%s_ff_lock", _name); \ 265 mutex_init(&fl->mtx, MUTEX_DEFAULT, IPL_SOFTNET); \ 266 } while (0) 267 #define IEEE80211_FF_LOCK_OBJ(_ic) (&(_ic)->ic_fflock.mtx) 268 #define IEEE80211_FF_LOCK_DESTROY(_ic) mutex_destroy(IEEE80211_FF_LOCK_OBJ(_ic)) 269 #define IEEE80211_FF_LOCK(_ic) mutex_enter(IEEE80211_FF_LOCK_OBJ(_ic)) 270 #define IEEE80211_FF_UNLOCK(_ic) mutex_exit(IEEE80211_FF_LOCK_OBJ(_ic)) 271 #define IEEE80211_FF_LOCK_ASSERT(_ic) \ 272 FBSDKASSERT(mutex_owned(IEEE80211_FF_LOCK_OBJ(_ic)), ("lock not owned")) 273 274 /* 275 * Node locking definitions. 276 */ 277 typedef struct { 278 char name[16]; /* e.g. "ath0_node_lock" */ 279 kmutex_t mtx; 280 } ieee80211_node_lock_t; 281 #define IEEE80211_NODE_LOCK_INIT(_nt, _name) do { \ 282 ieee80211_node_lock_t *nl = &(_nt)->nt_nodelock; \ 283 snprintf(nl->name, sizeof(nl->name), "%s_node_lock", _name); \ 284 mutex_init(&nl->mtx, MUTEX_DEFAULT, IPL_SOFTNET); \ 285 } while (0) 286 #define IEEE80211_NODE_LOCK_OBJ(_nt) (&(_nt)->nt_nodelock.mtx) 287 #define IEEE80211_NODE_LOCK_DESTROY(_nt) \ 288 mutex_destroy(IEEE80211_NODE_LOCK_OBJ(_nt)) 289 #define IEEE80211_NODE_LOCK(_nt) \ 290 mutex_enter(IEEE80211_NODE_LOCK_OBJ(_nt)) 291 #define IEEE80211_NODE_IS_LOCKED(_nt) \ 292 mtx_owned(IEEE80211_NODE_LOCK_OBJ(_nt)) 293 #define IEEE80211_NODE_UNLOCK(_nt) \ 294 mutex_exit(IEEE80211_NODE_LOCK_OBJ(_nt)) 295 #define IEEE80211_NODE_LOCK_ASSERT(_nt) \ 296 FBSDKASSERT(mutex_owned(IEEE80211_NODE_LOCK_OBJ(_nt)), ("lock not owned")) 297 298 /* 299 * Power-save queue definitions. 300 */ 301 typedef kmutex_t ieee80211_psq_lock_t; 302 #define IEEE80211_PSQ_INIT(_psq, _name) \ 303 mutex_init(&(_psq)->psq_lock, MUTEX_DEFAULT, IPL_SOFTNET) 304 #define IEEE80211_PSQ_DESTROY(_psq) mutex_destroy(&(_psq)->psq_lock) 305 #define IEEE80211_PSQ_LOCK(_psq) mutex_enter(&(_psq)->psq_lock) 306 #define IEEE80211_PSQ_UNLOCK(_psq) mutex_exit(&(_psq)->psq_lock) 307 308 #ifndef IF_PREPEND_LIST 309 #define _IF_PREPEND_LIST(ifq, mhead, mtail, mcount) do { \ 310 (mtail)->m_nextpkt = (ifq)->ifq_head; \ 311 if ((ifq)->ifq_tail == NULL) \ 312 (ifq)->ifq_tail = (mtail); \ 313 (ifq)->ifq_head = (mhead); \ 314 (ifq)->ifq_len += (mcount); \ 315 } while (0) 316 #define IF_PREPEND_LIST(ifq, mhead, mtail, mcount) do { \ 317 IF_LOCK(ifq); \ 318 _IF_PREPEND_LIST(ifq, mhead, mtail, mcount); \ 319 IF_UNLOCK(ifq); \ 320 } while (0) 321 #endif /* IF_PREPEND_LIST */ 322 323 /* 324 * Age queue definitions. 325 */ 326 typedef kmutex_t ieee80211_ageq_lock_t; 327 #define IEEE80211_AGEQ_INIT(_aq, _name) \ 328 mutex_init(&(_aq)->aq_lock, MUTEX_DEFAULT, IPL_SOFTNET) 329 #define IEEE80211_AGEQ_DESTROY(_aq) mutex_destroy(&(_aq)->aq_lock) 330 #define IEEE80211_AGEQ_LOCK(_aq) mutex_enter(&(_aq)->aq_lock) 331 #define IEEE80211_AGEQ_UNLOCK(_aq) mutex_exit(&(_aq)->aq_lock) 332 333 /* 334 * 802.1x MAC ACL database locking definitions. 335 */ 336 typedef kmutex_t acl_lock_t; 337 #define ACL_LOCK_INIT(_as, _name) \ 338 mutex_init(&(_as)->as_lock, MUTEX_DEFAULT, IPL_SOFTNET) 339 #define ACL_LOCK_DESTROY(_as) mutex_destroy(&(_as)->as_lock) 340 #define ACL_LOCK(_as) mutex_enter(&(_as)->as_lock) 341 #define ACL_UNLOCK(_as) mutex_exit(&(_as)->as_lock) 342 #define ACL_LOCK_ASSERT(_as) \ 343 FBSDKASSERT(mutex_owned((&(_as)->as_lock)), ("lock not owned")) 344 345 /* 346 * Scan table definitions. 347 */ 348 typedef kmutex_t ieee80211_scan_table_lock_t; 349 #define IEEE80211_SCAN_TABLE_LOCK_INIT(_st, _name) \ 350 mutex_init(&(_st)->st_lock, MUTEX_DEFAULT, IPL_SOFTNET) 351 #define IEEE80211_SCAN_TABLE_LOCK_DESTROY(_st) mutex_destroy(&(_st)->st_lock) 352 #define IEEE80211_SCAN_TABLE_LOCK(_st) mutex_enter(&(_st)->st_lock) 353 #define IEEE80211_SCAN_TABLE_UNLOCK(_st) mutex_exit(&(_st)->st_lock) 354 355 typedef kmutex_t ieee80211_scan_iter_lock_t; 356 #define IEEE80211_SCAN_ITER_LOCK_INIT(_st, _name) \ 357 mutex_init(&(_st)->st_scanlock, MUTEX_DEFAULT, IPL_SOFTNET) 358 #define IEEE80211_SCAN_ITER_LOCK_DESTROY(_st) mutex_destroy(&(_st)->st_scanlock) 359 #define IEEE80211_SCAN_ITER_LOCK(_st) mutex_enter(&(_st)->st_scanlock) 360 #define IEEE80211_SCAN_ITER_UNLOCK(_st) mutex_exit(&(_st)->st_scanlock) 361 362 /* 363 * Mesh node/routing definitions. 364 */ 365 typedef kmutex_t ieee80211_rte_lock_t; 366 #define MESH_RT_ENTRY_LOCK_INIT(_rt, _name) \ 367 mutex_init(&(rt)->rt_lock, MUTEX_DEFAULT, IPL_SOFTNET) 368 #define MESH_RT_ENTRY_LOCK_DESTROY(_rt) \ 369 mutex_destroy(&(_rt)->rt_lock) 370 #define MESH_RT_ENTRY_LOCK(rt) mutex_enter(&(rt)->rt_lock) 371 #define MESH_RT_ENTRY_LOCK_ASSERT(rt) \ 372 FBSDKASSERT(mutex_owned(&(rt)->rt_lock), ("mutex not owned")) 373 #define MESH_RT_ENTRY_UNLOCK(rt) mutex_exit(&(rt)->rt_lock) 374 375 typedef kmutex_t ieee80211_rt_lock_t; 376 #define MESH_RT_LOCK(ms) mutex_enter(&(ms)->ms_rt_lock) 377 #define MESH_RT_LOCK_ASSERT(ms) \ 378 FBSDKASSERT(mutex_owned(&(ms)->ms_rt_lock), ("lock not owned")) 379 #define MESH_RT_UNLOCK(ms) mutex_exit(&(ms)->ms_rt_lock) 380 #define MESH_RT_LOCK_INIT(ms, name) \ 381 mutex_init(&(ms)->ms_rt_lock, MUTEX_DEFAULT, IPL_SOFTNET) 382 #define MESH_RT_LOCK_DESTROY(ms) \ 383 mutex_destroy(&(ms)->ms_rt_lock) 384 385 /* 386 * Node reference counting definitions. 387 * 388 * ieee80211_node_initref initialize the reference count to 1 389 * ieee80211_node_incref add a reference 390 * ieee80211_node_decref remove a reference 391 * ieee80211_node_dectestref remove a reference and return 1 if this 392 * is the last reference, otherwise 0 393 * ieee80211_node_refcnt reference count for printing (only) 394 */ 395 396 #define ieee80211_node_initref(_ni) \ 397 do { ((_ni)->ni_refcnt = 1); } while (0) 398 #define ieee80211_node_incref(_ni) \ 399 atomic_add_int(&(_ni)->ni_refcnt, 1) 400 #define ieee80211_node_decref(_ni) \ 401 atomic_subtract_int(&(_ni)->ni_refcnt, 1) 402 struct ieee80211_node; 403 int ieee80211_node_dectestref(struct ieee80211_node *ni); 404 #define ieee80211_node_refcnt(_ni) (_ni)->ni_refcnt 405 406 struct ifqueue; 407 struct ieee80211vap; 408 void ieee80211_drain_ifq(struct ifqueue *); 409 void ieee80211_flush_ifq(struct ifqueue *, struct ieee80211vap *); 410 411 void ieee80211_vap_destroy(struct ieee80211vap *); 412 413 #define IFNET_IS_UP_RUNNING(_ifp) \ 414 (((_ifp)->if_flags & IFF_UP) && \ 415 ((_ifp)->if_flags & IFF_RUNNING)) 416 417 /* XXX TODO: cap these at 1, as hz may not be 1000 */ 418 #define msecs_to_ticks(ms) (((ms)*hz)/1000) 419 #define ticks_to_msecs(t) (1000*(t) / hz) 420 #define ticks_to_secs(t) ((t) / hz) 421 422 #define ieee80211_time_after(a,b) ((long)(b) - (long)(a) < 0) 423 #define ieee80211_time_before(a,b) ieee80211_time_after(b,a) 424 #define ieee80211_time_after_eq(a,b) ((long)(a) - (long)(b) >= 0) 425 #define ieee80211_time_before_eq(a,b) ieee80211_time_after_eq(b,a) 426 427 struct mbuf *ieee80211_getmgtframe(uint8_t **frm, int headroom, int pktlen); 428 429 /* tx path usage */ 430 #define M_ENCAP M_LINK0 /* 802.11 encap done */ 431 #define M_EAPOL M_LINK3 /* PAE/EAPOL frame */ 432 #define M_PWR_SAV M_LINK4 /* bypass PS handling */ 433 #define M_MORE_DATA M_LINK5 /* more data frames to follow */ 434 #define M_FF M_LINK6 /* fast frame / A-MSDU */ 435 #define M_TXCB M_LINK7 /* do tx complete callback */ 436 #define M_AMPDU_MPDU M_LINK8 /* ok for A-MPDU aggregation */ 437 #define M_FRAG M_LINK9 /* frame fragmentation */ 438 #define M_FIRSTFRAG M_LINK10 /* first frame fragment */ 439 #define M_LASTFRAG M_LINK11 /* last frame fragment */ 440 441 #define M_80211_TX \ 442 (M_ENCAP|M_EAPOL|M_PWR_SAV|M_MORE_DATA|M_FF|M_TXCB| \ 443 M_AMPDU_MPDU|M_FRAG|M_FIRSTFRAG|M_LASTFRAG) 444 445 /* rx path usage */ 446 #define M_AMPDU M_LINK1 /* A-MPDU subframe */ 447 #define M_WEP M_LINK2 /* WEP done by hardware */ 448 #if 0 449 #define M_AMPDU_MPDU M_LINK8 /* A-MPDU re-order done */ 450 #endif 451 #define M_80211_RX (M_AMPDU|M_WEP|M_AMPDU_MPDU) 452 453 #define IEEE80211_MBUF_TX_FLAG_BITS \ 454 M_FLAG_BITS \ 455 "\15M_ENCAP\17M_EAPOL\20M_PWR_SAV\21M_MORE_DATA\22M_FF\23M_TXCB" \ 456 "\24M_AMPDU_MPDU\25M_FRAG\26M_FIRSTFRAG\27M_LASTFRAG" 457 458 #define IEEE80211_MBUF_RX_FLAG_BITS \ 459 M_FLAG_BITS \ 460 "\15M_AMPDU\16M_WEP\24M_AMPDU_MPDU" 461 462 /* 463 * Store WME access control bits in the vlan tag. 464 * This is safe since it's done after the packet is classified 465 * (where we use any previous tag) and because it's passed 466 * directly in to the driver and there's no chance someone 467 * else will clobber them on us. 468 */ 469 #define M_WME_SETAC(m, ac) \ 470 ((m)->m_pkthdr.ether_vtag = (ac)) 471 #define M_WME_GETAC(m) ((m)->m_pkthdr.ether_vtag) 472 473 /* 474 * Mbufs on the power save queue are tagged with an age and 475 * timed out. We reuse the hardware checksum field in the 476 * mbuf packet header to store this data. 477 */ 478 #define M_AGE_SET(m,v) (m->m_pkthdr.csum_data = v) 479 #define M_AGE_GET(m) (m->m_pkthdr.csum_data) 480 #define M_AGE_SUB(m,adj) (m->m_pkthdr.csum_data -= adj) 481 482 /* 483 * Store the sequence number. XXX? correct to use segsz? 484 */ 485 #define M_SEQNO_SET(m, seqno) \ 486 ((m)->m_pkthdr.segsz = (seqno)) 487 #define M_SEQNO_GET(m) ((m)->m_pkthdr.segsz) 488 489 #define MTAG_ABI_NET80211 1132948340 /* net80211 ABI */ 490 491 struct ieee80211_cb { 492 void (*func)(struct ieee80211_node *, void *, int status); 493 void *arg; 494 }; 495 #define NET80211_TAG_CALLBACK 0 /* xmit complete callback */ 496 int ieee80211_add_callback(struct mbuf *m, 497 void (*func)(struct ieee80211_node *, void *, int), void *arg); 498 void ieee80211_process_callback(struct ieee80211_node *, struct mbuf *, int); 499 500 #define NET80211_TAG_XMIT_PARAMS 1 501 /* See below; this is after the bpf_params definition */ 502 503 #define NET80211_TAG_RECV_PARAMS 2 504 505 #define NET80211_TAG_TOA_PARAMS 3 506 507 struct ieee80211com; 508 int ieee80211_parent_xmitpkt(struct ieee80211com *, struct mbuf *); 509 int ieee80211_vap_xmitpkt(struct ieee80211vap *, struct mbuf *); 510 511 void get_random_bytes(void *, size_t); 512 513 void ieee80211_sysctl_attach(struct ieee80211com *); 514 void ieee80211_sysctl_detach(struct ieee80211com *); 515 void ieee80211_sysctl_vattach(struct ieee80211vap *); 516 void ieee80211_sysctl_vdetach(struct ieee80211vap *); 517 518 #if notyet 519 SYSCTL_DECL(_net_wlan); 520 int ieee80211_sysctl_msecs_ticks(SYSCTL_HANDLER_ARGS); 521 #endif 522 523 524 #ifdef notyet 525 526 /* 527 * A "policy module" is an adjunct module to net80211 that provides 528 * functionality that typically includes policy decisions. This 529 * modularity enables extensibility and vendor-supplied functionality. 530 */ 531 #define _IEEE80211_POLICY_MODULE(policy, name, version) \ 532 typedef void (*policy##_setup)(int); \ 533 SET_DECLARE(policy##_set, policy##_setup); \ 534 static int \ 535 wlan_##name##_modevent(module_t mod, int type, void *unused) \ 536 { \ 537 policy##_setup * const *iter, f; \ 538 switch (type) { \ 539 case MOD_LOAD: \ 540 SET_FOREACH(iter, policy##_set) { \ 541 f = (void*) *iter; \ 542 f(type); \ 543 } \ 544 return 0; \ 545 case MOD_UNLOAD: \ 546 case MOD_QUIESCE: \ 547 if (nrefs) { \ 548 printf("wlan_" #name ": still in use " \ 549 "(%u dynamic refs)\n", nrefs); \ 550 return EBUSY; \ 551 } \ 552 if (type == MOD_UNLOAD) { \ 553 SET_FOREACH(iter, policy##_set) { \ 554 f = (void*) *iter; \ 555 f(type); \ 556 } \ 557 } \ 558 return 0; \ 559 } \ 560 return EINVAL; \ 561 } \ 562 static moduledata_t name##_mod = { \ 563 "wlan_" #name, \ 564 wlan_##name##_modevent, \ 565 0 \ 566 }; \ 567 DECLARE_MODULE(wlan_##name, name##_mod, SI_SUB_DRIVERS, SI_ORDER_FIRST);\ 568 MODULE_VERSION(wlan_##name, version); \ 569 MODULE_DEPEND(wlan_##name, wlan, 1, 1, 1) 570 571 /* 572 * Crypto modules implement cipher support. 573 */ 574 #define IEEE80211_CRYPTO_MODULE(name, version) \ 575 _IEEE80211_POLICY_MODULE(crypto, name, version); \ 576 static void \ 577 name##_modevent(int type) \ 578 { \ 579 if (type == MOD_LOAD) \ 580 ieee80211_crypto_register(&name); \ 581 else \ 582 ieee80211_crypto_unregister(&name); \ 583 } \ 584 TEXT_SET(crypto##_set, name##_modevent) 585 586 /* 587 * Scanner modules provide scanning policy. 588 */ 589 #define IEEE80211_SCANNER_MODULE(name, version) \ 590 _IEEE80211_POLICY_MODULE(scanner, name, version) 591 592 #define IEEE80211_SCANNER_ALG(name, alg, v) \ 593 static void \ 594 name##_modevent(int type) \ 595 { \ 596 if (type == MOD_LOAD) \ 597 ieee80211_scanner_register(alg, &v); \ 598 else \ 599 ieee80211_scanner_unregister(alg, &v); \ 600 } \ 601 TEXT_SET(scanner_set, name##_modevent); \ 602 603 /* 604 * ACL modules implement acl policy. 605 */ 606 #define IEEE80211_ACL_MODULE(name, alg, version) \ 607 _IEEE80211_POLICY_MODULE(acl, name, version); \ 608 static void \ 609 alg##_modevent(int type) \ 610 { \ 611 if (type == MOD_LOAD) \ 612 ieee80211_aclator_register(&alg); \ 613 else \ 614 ieee80211_aclator_unregister(&alg); \ 615 } \ 616 TEXT_SET(acl_set, alg##_modevent); \ 617 618 /* 619 * Authenticator modules handle 802.1x/WPA authentication. 620 */ 621 #define IEEE80211_AUTH_MODULE(name, version) \ 622 _IEEE80211_POLICY_MODULE(auth, name, version) 623 624 #define IEEE80211_AUTH_ALG(name, alg, v) \ 625 static void \ 626 name##_modevent(int type) \ 627 { \ 628 if (type == MOD_LOAD) \ 629 ieee80211_authenticator_register(alg, &v); \ 630 else \ 631 ieee80211_authenticator_unregister(alg); \ 632 } \ 633 TEXT_SET(auth_set, name##_modevent) 634 635 /* 636 * Rate control modules provide tx rate control support. 637 */ 638 #define IEEE80211_RATECTL_MODULE(alg, version) \ 639 _IEEE80211_POLICY_MODULE(ratectl, alg, version); \ 640 641 #define IEEE80211_RATECTL_ALG(name, alg, v) \ 642 static void \ 643 alg##_modevent(int type) \ 644 { \ 645 if (type == MOD_LOAD) \ 646 ieee80211_ratectl_register(alg, &v); \ 647 else \ 648 ieee80211_ratectl_unregister(alg); \ 649 } \ 650 TEXT_SET(ratectl##_set, alg##_modevent) 651 652 #else 653 /* NNN This looks like module load/unload support ... notyet supported */ 654 #define _IEEE80211_POLICY_MODULE(policy, name, version) /* unsupported */ 655 #define IEEE80211_CRYPTO_MODULE(name, version) /* unsupported */ 656 #define IEEE80211_SCANNER_MODULE(name, version) /* unsupported */ 657 #define IEEE80211_SCANNER_ALG(name, alg, v) /* unsupported */ 658 #define IEEE80211_ACL_MODULE(name, alg, version) const void *const temp = &alg 659 #define IEEE80211_AUTH_MODULE(name, version) /* unsupported */ 660 #define IEEE80211_AUTH_ALG(name, alg, v) /* unsupported */ 661 #define IEEE80211_RATECTL_MODULE(alg, version) /* unsupported */ 662 #define IEEE80211_RATECTL_ALG(name, alg, v) /* unsupported */ 663 #endif 664 665 /* 666 * IOCTL support 667 */ 668 669 struct ieee80211req; 670 671 typedef int ieee80211_ioctl_getfunc(struct ieee80211vap *, struct ieee80211req *); 672 #if notyet 673 SET_DECLARE(ieee80211_ioctl_getset, ieee80211_ioctl_getfunc); 674 #endif 675 #define IEEE80211_IOCTL_GET(_name, _get) TEXT_SET(ieee80211_ioctl_getset, _get) 676 677 typedef int ieee80211_ioctl_setfunc(struct ieee80211vap *, struct ieee80211req *); 678 #if notyet 679 SET_DECLARE(ieee80211_ioctl_setset, ieee80211_ioctl_setfunc); 680 #endif 681 #define IEEE80211_IOCTL_SET(_name, _set) TEXT_SET(ieee80211_ioctl_setset, _set) 682 683 #endif /* _KERNEL */ 684 685 /* XXX this stuff belongs elsewhere */ 686 /* 687 * Message formats for messages from the net80211 layer to user 688 * applications via the routing socket. These messages are appended 689 * to an if_announcemsghdr structure. 690 */ 691 struct ieee80211_join_event { 692 uint8_t iev_addr[6]; 693 }; 694 695 struct ieee80211_leave_event { 696 uint8_t iev_addr[6]; 697 }; 698 699 struct ieee80211_replay_event { 700 uint8_t iev_src[6]; /* src MAC */ 701 uint8_t iev_dst[6]; /* dst MAC */ 702 uint8_t iev_cipher; /* cipher type */ 703 uint8_t iev_keyix; /* key id/index */ 704 uint64_t iev_keyrsc; /* RSC from key */ 705 uint64_t iev_rsc; /* RSC from frame */ 706 }; 707 708 struct ieee80211_michael_event { 709 uint8_t iev_src[6]; /* src MAC */ 710 uint8_t iev_dst[6]; /* dst MAC */ 711 uint8_t iev_cipher; /* cipher type */ 712 uint8_t iev_keyix; /* key id/index */ 713 }; 714 715 struct ieee80211_wds_event { 716 uint8_t iev_addr[6]; 717 }; 718 719 struct ieee80211_csa_event { 720 uint32_t iev_flags; /* channel flags */ 721 uint16_t iev_freq; /* setting in Mhz */ 722 uint8_t iev_ieee; /* IEEE channel number */ 723 uint8_t iev_mode; /* CSA mode */ 724 uint8_t iev_count; /* CSA count */ 725 }; 726 727 struct ieee80211_cac_event { 728 uint32_t iev_flags; /* channel flags */ 729 uint16_t iev_freq; /* setting in Mhz */ 730 uint8_t iev_ieee; /* IEEE channel number */ 731 /* XXX timestamp? */ 732 uint8_t iev_type; /* IEEE80211_NOTIFY_CAC_* */ 733 }; 734 735 struct ieee80211_radar_event { 736 uint32_t iev_flags; /* channel flags */ 737 uint16_t iev_freq; /* setting in Mhz */ 738 uint8_t iev_ieee; /* IEEE channel number */ 739 /* XXX timestamp? */ 740 }; 741 742 struct ieee80211_auth_event { 743 uint8_t iev_addr[6]; 744 }; 745 746 struct ieee80211_deauth_event { 747 uint8_t iev_addr[6]; 748 }; 749 750 struct ieee80211_country_event { 751 uint8_t iev_addr[6]; 752 uint8_t iev_cc[2]; /* ISO country code */ 753 }; 754 755 struct ieee80211_radio_event { 756 uint8_t iev_state; /* 1 on, 0 off */ 757 }; 758 759 #define RTM_IEEE80211_ASSOC 100 /* station associate (bss mode) */ 760 #define RTM_IEEE80211_REASSOC 101 /* station re-associate (bss mode) */ 761 #define RTM_IEEE80211_DISASSOC 102 /* station disassociate (bss mode) */ 762 #define RTM_IEEE80211_JOIN 103 /* station join (ap mode) */ 763 #define RTM_IEEE80211_LEAVE 104 /* station leave (ap mode) */ 764 #define RTM_IEEE80211_SCAN 105 /* scan complete, results available */ 765 #define RTM_IEEE80211_REPLAY 106 /* sequence counter replay detected */ 766 #define RTM_IEEE80211_MICHAEL 107 /* Michael MIC failure detected */ 767 #define RTM_IEEE80211_REJOIN 108 /* station re-associate (ap mode) */ 768 #define RTM_IEEE80211_WDS 109 /* WDS discovery (ap mode) */ 769 #define RTM_IEEE80211_CSA 110 /* Channel Switch Announcement event */ 770 #define RTM_IEEE80211_RADAR 111 /* radar event */ 771 #define RTM_IEEE80211_CAC 112 /* Channel Availability Check event */ 772 #define RTM_IEEE80211_DEAUTH 113 /* station deauthenticate */ 773 #define RTM_IEEE80211_AUTH 114 /* station authenticate (ap mode) */ 774 #define RTM_IEEE80211_COUNTRY 115 /* discovered country code (sta mode) */ 775 #define RTM_IEEE80211_RADIO 116 /* RF kill switch state change */ 776 777 /* 778 * Structure prepended to raw packets sent through the bpf 779 * interface when set to DLT_IEEE802_11_RADIO. This allows 780 * user applications to specify pretty much everything in 781 * an Atheros tx descriptor. XXX need to generalize. 782 * 783 * XXX cannot be more than 14 bytes as it is copied to a sockaddr's 784 * XXX sa_data area. 785 */ 786 struct ieee80211_bpf_params { 787 uint8_t ibp_vers; /* version */ 788 #define IEEE80211_BPF_VERSION 0 789 uint8_t ibp_len; /* header length in bytes */ 790 uint8_t ibp_flags; 791 #define IEEE80211_BPF_SHORTPRE 0x01 /* tx with short preamble */ 792 #define IEEE80211_BPF_NOACK 0x02 /* tx with no ack */ 793 #define IEEE80211_BPF_CRYPTO 0x04 /* tx with h/w encryption */ 794 #define IEEE80211_BPF_FCS 0x10 /* frame incldues FCS */ 795 #define IEEE80211_BPF_DATAPAD 0x20 /* frame includes data padding */ 796 #define IEEE80211_BPF_RTS 0x40 /* tx with RTS/CTS */ 797 #define IEEE80211_BPF_CTS 0x80 /* tx with CTS only */ 798 uint8_t ibp_pri; /* WME/WMM AC+tx antenna */ 799 uint8_t ibp_try0; /* series 1 try count */ 800 uint8_t ibp_rate0; /* series 1 IEEE tx rate */ 801 uint8_t ibp_power; /* tx power (device units) */ 802 uint8_t ibp_ctsrate; /* IEEE tx rate for CTS */ 803 uint8_t ibp_try1; /* series 2 try count */ 804 uint8_t ibp_rate1; /* series 2 IEEE tx rate */ 805 uint8_t ibp_try2; /* series 3 try count */ 806 uint8_t ibp_rate2; /* series 3 IEEE tx rate */ 807 uint8_t ibp_try3; /* series 4 try count */ 808 uint8_t ibp_rate3; /* series 4 IEEE tx rate */ 809 }; 810 811 #ifdef _KERNEL 812 struct ieee80211_tx_params { 813 struct ieee80211_bpf_params params; 814 }; 815 int ieee80211_add_xmit_params(struct mbuf *m, 816 const struct ieee80211_bpf_params *); 817 int ieee80211_get_xmit_params(struct mbuf *m, 818 struct ieee80211_bpf_params *); 819 820 struct ieee80211_rx_params; 821 struct ieee80211_rx_stats; 822 823 int ieee80211_add_rx_params(struct mbuf *m, 824 const struct ieee80211_rx_stats *rxs); 825 int ieee80211_get_rx_params(struct mbuf *m, 826 struct ieee80211_rx_stats *rxs); 827 const struct ieee80211_rx_stats * ieee80211_get_rx_params_ptr(struct mbuf *m); 828 829 struct ieee80211_toa_params { 830 int request_id; 831 }; 832 int ieee80211_add_toa_params(struct mbuf *m, 833 const struct ieee80211_toa_params *p); 834 int ieee80211_get_toa_params(struct mbuf *m, 835 struct ieee80211_toa_params *p); 836 837 #define IEEE80211_F_SURVEY_TIME 0x00000001 838 #define IEEE80211_F_SURVEY_TIME_BUSY 0x00000002 839 #define IEEE80211_F_SURVEY_NOISE_DBM 0x00000004 840 #define IEEE80211_F_SURVEY_TSC 0x00000008 841 struct ieee80211_channel_survey { 842 uint32_t s_flags; 843 uint32_t s_time; 844 uint32_t s_time_busy; 845 int32_t s_noise; 846 uint64_t s_tsc; 847 }; 848 849 850 /* 851 * Malloc API. Other BSD operating systems have slightly 852 * different malloc/free namings (eg DragonflyBSD.) 853 */ 854 #define IEEE80211_MALLOC malloc 855 #define IEEE80211_FREE free 856 857 /* XXX TODO: get rid of WAITOK, fix all the users of it? */ 858 #define IEEE80211_M_NOWAIT M_NOWAIT 859 #define IEEE80211_M_WAITOK M_WAITOK 860 #define IEEE80211_M_ZERO M_ZERO 861 862 /* XXX TODO: the type fields */ 863 864 /* 865 * Startup function for NetBSD 866 */ 867 868 int ieee80211_init0(void); 869 870 871 /* 872 * Functions FreeBSD uses that NetBSD doesn't have ... 873 */ 874 875 int if_printf(struct ifnet *ifp, const char *fmt, ...) __printflike(2, 3); 876 void m_align(struct mbuf *m, int len); 877 int m_append(struct mbuf *m0, int len, const void *cpv); 878 struct mbuf * m_unshare(struct mbuf *m0, int how); 879 880 static __inline void m_clrprotoflags(struct mbuf *m) 881 { 882 m->m_flags &= ~(M_LINK0|M_LINK1|M_LINK2|M_LINK3|M_LINK4|M_LINK5 883 |M_LINK6|M_LINK7|M_LINK8|M_LINK9|M_LINK10|M_LINK11); 884 } 885 886 /*- 887 * Macro for type conversion: convert mbuf pointer to data pointer of correct 888 * type: 889 * 890 * mtod(m, t) -- Convert mbuf pointer to data pointer of correct type. 891 * mtodo(m, o) -- Same as above but with offset 'o' into data. 892 */ 893 #define mtod(m, t) ((t)((m)->m_data)) 894 #define mtodo(m, o) ((void *)(((m)->m_data) + (o))) 895 896 /* Berkeley Packet Filter shim */ 897 898 #define BPF_MTAP(_ifp,_m) do { \ 899 bpf_mtap((_ifp), (_m), BPF_D_INOUT); \ 900 } while (0) 901 902 /* Missing define in net/if_ether.h */ 903 904 #define ETHER_IS_BROADCAST(addr) \ 905 (((addr)[0] & (addr)[1] & (addr)[2] & \ 906 (addr)[3] & (addr)[4] & (addr)[5]) == 0xff) 907 908 #endif /* _KERNEL */ 909 910 #endif /* _NET80211_IEEE80211_NETBSD_H_ */ 911
Indexes created Sun Sep 28 16:09:52 GMT 2025