Home | History | Annotate | Line # | Download | only in net80211
ieee80211_node.c revision 1.16
      1  1.16  dyoung /*	$NetBSD: ieee80211_node.c,v 1.16 2004/07/23 05:19:41 dyoung Exp $	*/
      2   1.1  dyoung /*-
      3   1.1  dyoung  * Copyright (c) 2001 Atsushi Onoe
      4   1.1  dyoung  * Copyright (c) 2002, 2003 Sam Leffler, Errno Consulting
      5   1.1  dyoung  * All rights reserved.
      6   1.1  dyoung  *
      7   1.1  dyoung  * Redistribution and use in source and binary forms, with or without
      8   1.1  dyoung  * modification, are permitted provided that the following conditions
      9   1.1  dyoung  * are met:
     10   1.1  dyoung  * 1. Redistributions of source code must retain the above copyright
     11   1.1  dyoung  *    notice, this list of conditions and the following disclaimer.
     12   1.1  dyoung  * 2. Redistributions in binary form must reproduce the above copyright
     13   1.1  dyoung  *    notice, this list of conditions and the following disclaimer in the
     14   1.1  dyoung  *    documentation and/or other materials provided with the distribution.
     15   1.1  dyoung  * 3. The name of the author may not be used to endorse or promote products
     16   1.1  dyoung  *    derived from this software without specific prior written permission.
     17   1.1  dyoung  *
     18   1.1  dyoung  * Alternatively, this software may be distributed under the terms of the
     19   1.1  dyoung  * GNU General Public License ("GPL") version 2 as published by the Free
     20   1.1  dyoung  * Software Foundation.
     21   1.1  dyoung  *
     22   1.1  dyoung  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     23   1.1  dyoung  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     24   1.1  dyoung  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     25   1.1  dyoung  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     26   1.1  dyoung  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     27   1.1  dyoung  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     28   1.1  dyoung  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     29   1.1  dyoung  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     30   1.1  dyoung  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     31   1.1  dyoung  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     32   1.1  dyoung  */
     33   1.1  dyoung 
     34   1.1  dyoung #include <sys/cdefs.h>
     35   1.3  dyoung #ifdef __FreeBSD__
     36  1.11  dyoung __FBSDID("$FreeBSD: src/sys/net80211/ieee80211_node.c,v 1.22 2004/04/05 04:15:55 sam Exp $");
     37   1.3  dyoung #else
     38  1.16  dyoung __KERNEL_RCSID(0, "$NetBSD: ieee80211_node.c,v 1.16 2004/07/23 05:19:41 dyoung Exp $");
     39   1.3  dyoung #endif
     40   1.1  dyoung 
     41   1.1  dyoung #include "opt_inet.h"
     42   1.1  dyoung 
     43   1.1  dyoung #include <sys/param.h>
     44   1.1  dyoung #include <sys/systm.h>
     45   1.1  dyoung #include <sys/mbuf.h>
     46   1.1  dyoung #include <sys/malloc.h>
     47   1.1  dyoung #include <sys/kernel.h>
     48   1.1  dyoung #include <sys/socket.h>
     49   1.1  dyoung #include <sys/sockio.h>
     50   1.1  dyoung #include <sys/endian.h>
     51   1.1  dyoung #include <sys/errno.h>
     52   1.4  dyoung #ifdef __FreeBSD__
     53   1.1  dyoung #include <sys/bus.h>
     54   1.4  dyoung #endif
     55   1.1  dyoung #include <sys/proc.h>
     56   1.1  dyoung #include <sys/sysctl.h>
     57   1.1  dyoung 
     58   1.2  dyoung #ifdef __FreeBSD__
     59   1.1  dyoung #include <machine/atomic.h>
     60   1.2  dyoung #endif
     61   1.1  dyoung 
     62   1.1  dyoung #include <net/if.h>
     63   1.1  dyoung #include <net/if_dl.h>
     64   1.1  dyoung #include <net/if_media.h>
     65   1.1  dyoung #include <net/if_arp.h>
     66   1.2  dyoung #ifdef __FreeBSD__
     67   1.1  dyoung #include <net/ethernet.h>
     68   1.4  dyoung #else
     69   1.4  dyoung #include <net/if_ether.h>
     70   1.2  dyoung #endif
     71   1.1  dyoung #include <net/if_llc.h>
     72   1.1  dyoung 
     73   1.1  dyoung #include <net80211/ieee80211_var.h>
     74   1.4  dyoung #include <net80211/ieee80211_compat.h>
     75   1.1  dyoung 
     76   1.1  dyoung #include <net/bpf.h>
     77   1.1  dyoung 
     78   1.1  dyoung #ifdef INET
     79   1.1  dyoung #include <netinet/in.h>
     80   1.4  dyoung #ifdef __FreeBSD__
     81   1.1  dyoung #include <netinet/if_ether.h>
     82   1.4  dyoung #else
     83   1.4  dyoung #include <net/if_ether.h>
     84   1.4  dyoung #endif
     85   1.1  dyoung #endif
     86   1.1  dyoung 
     87   1.1  dyoung static struct ieee80211_node *ieee80211_node_alloc(struct ieee80211com *);
     88   1.1  dyoung static void ieee80211_node_free(struct ieee80211com *, struct ieee80211_node *);
     89   1.1  dyoung static void ieee80211_node_copy(struct ieee80211com *,
     90   1.1  dyoung 		struct ieee80211_node *, const struct ieee80211_node *);
     91   1.9  dyoung static u_int8_t ieee80211_node_getrssi(struct ieee80211com *,
     92   1.9  dyoung 		struct ieee80211_node *);
     93   1.9  dyoung 
     94   1.1  dyoung static void ieee80211_setup_node(struct ieee80211com *ic,
     95   1.1  dyoung 		struct ieee80211_node *ni, u_int8_t *macaddr);
     96   1.1  dyoung static void _ieee80211_free_node(struct ieee80211com *,
     97   1.1  dyoung 		struct ieee80211_node *);
     98   1.1  dyoung 
     99  1.11  dyoung MALLOC_DEFINE(M_80211_NODE, "80211node", "802.11 node state");
    100   1.9  dyoung 
    101   1.1  dyoung void
    102   1.1  dyoung ieee80211_node_attach(struct ifnet *ifp)
    103   1.1  dyoung {
    104   1.1  dyoung 	struct ieee80211com *ic = (void *)ifp;
    105   1.1  dyoung 
    106   1.2  dyoung #ifdef __FreeBSD__
    107   1.1  dyoung 	/* XXX need unit */
    108   1.9  dyoung 	IEEE80211_NODE_LOCK_INIT(ic, ifp->if_xname);
    109   1.2  dyoung #endif
    110   1.1  dyoung 	TAILQ_INIT(&ic->ic_node);
    111   1.1  dyoung 	ic->ic_node_alloc = ieee80211_node_alloc;
    112   1.1  dyoung 	ic->ic_node_free = ieee80211_node_free;
    113   1.1  dyoung 	ic->ic_node_copy = ieee80211_node_copy;
    114   1.9  dyoung 	ic->ic_node_getrssi = ieee80211_node_getrssi;
    115   1.9  dyoung 	ic->ic_scangen = 1;
    116   1.1  dyoung }
    117   1.1  dyoung 
    118   1.1  dyoung void
    119   1.1  dyoung ieee80211_node_lateattach(struct ifnet *ifp)
    120   1.1  dyoung {
    121   1.1  dyoung 	struct ieee80211com *ic = (void *)ifp;
    122  1.11  dyoung 	struct ieee80211_node *ni;
    123   1.1  dyoung 
    124  1.11  dyoung 	ni = (*ic->ic_node_alloc)(ic);
    125  1.11  dyoung 	IASSERT(ni != NULL, ("unable to setup inital BSS node"));
    126  1.11  dyoung 	ni->ni_chan = IEEE80211_CHAN_ANYC;
    127  1.11  dyoung 	ic->ic_bss = ni;
    128  1.11  dyoung 	ic->ic_txpower = IEEE80211_TXPOWER_MAX;
    129   1.1  dyoung }
    130   1.1  dyoung 
    131   1.1  dyoung void
    132   1.1  dyoung ieee80211_node_detach(struct ifnet *ifp)
    133   1.1  dyoung {
    134   1.1  dyoung 	struct ieee80211com *ic = (void *)ifp;
    135   1.1  dyoung 
    136   1.1  dyoung 	if (ic->ic_bss != NULL)
    137   1.1  dyoung 		(*ic->ic_node_free)(ic, ic->ic_bss);
    138   1.1  dyoung 	ieee80211_free_allnodes(ic);
    139   1.2  dyoung #ifdef __FreeBSD__
    140   1.9  dyoung 	IEEE80211_NODE_LOCK_DESTROY(ic);
    141   1.2  dyoung #endif
    142   1.1  dyoung }
    143   1.1  dyoung 
    144   1.1  dyoung /*
    145   1.1  dyoung  * AP scanning support.
    146   1.1  dyoung  */
    147   1.1  dyoung 
    148   1.1  dyoung /*
    149   1.1  dyoung  * Initialize the active channel set based on the set
    150   1.1  dyoung  * of available channels and the current PHY mode.
    151   1.1  dyoung  */
    152   1.1  dyoung static void
    153   1.1  dyoung ieee80211_reset_scan(struct ifnet *ifp)
    154   1.1  dyoung {
    155   1.1  dyoung 	struct ieee80211com *ic = (void *)ifp;
    156   1.1  dyoung 
    157   1.1  dyoung 	memcpy(ic->ic_chan_scan, ic->ic_chan_active,
    158   1.1  dyoung 		sizeof(ic->ic_chan_active));
    159   1.1  dyoung 	/* NB: hack, setup so next_scan starts with the first channel */
    160   1.1  dyoung 	if (ic->ic_bss->ni_chan == IEEE80211_CHAN_ANYC)
    161   1.1  dyoung 		ic->ic_bss->ni_chan = &ic->ic_channels[IEEE80211_CHAN_MAX];
    162   1.1  dyoung }
    163   1.1  dyoung 
    164   1.1  dyoung /*
    165   1.1  dyoung  * Begin an active scan.
    166   1.1  dyoung  */
    167   1.1  dyoung void
    168   1.1  dyoung ieee80211_begin_scan(struct ifnet *ifp)
    169   1.1  dyoung {
    170   1.1  dyoung 	struct ieee80211com *ic = (void *)ifp;
    171   1.1  dyoung 
    172   1.1  dyoung 	/*
    173   1.1  dyoung 	 * In all but hostap mode scanning starts off in
    174   1.1  dyoung 	 * an active mode before switching to passive.
    175   1.1  dyoung 	 */
    176   1.9  dyoung 	if (ic->ic_opmode != IEEE80211_M_HOSTAP) {
    177   1.1  dyoung 		ic->ic_flags |= IEEE80211_F_ASCAN;
    178   1.9  dyoung 		ic->ic_stats.is_scan_active++;
    179   1.9  dyoung 	} else
    180   1.9  dyoung 		ic->ic_stats.is_scan_passive++;
    181   1.1  dyoung 	if (ifp->if_flags & IFF_DEBUG)
    182   1.1  dyoung 		if_printf(ifp, "begin %s scan\n",
    183   1.1  dyoung 			(ic->ic_flags & IEEE80211_F_ASCAN) ?
    184   1.1  dyoung 				"active" : "passive");
    185   1.1  dyoung 	/*
    186   1.1  dyoung 	 * Clear scan state and flush any previously seen
    187   1.1  dyoung 	 * AP's.  Note that the latter assumes we don't act
    188   1.1  dyoung 	 * as both an AP and a station, otherwise we'll
    189   1.1  dyoung 	 * potentially flush state of stations associated
    190   1.1  dyoung 	 * with us.
    191   1.1  dyoung 	 */
    192   1.1  dyoung 	ieee80211_reset_scan(ifp);
    193   1.1  dyoung 	ieee80211_free_allnodes(ic);
    194   1.1  dyoung 
    195   1.1  dyoung 	/* Scan the next channel. */
    196   1.1  dyoung 	ieee80211_next_scan(ifp);
    197   1.1  dyoung }
    198   1.1  dyoung 
    199   1.1  dyoung /*
    200   1.1  dyoung  * Switch to the next channel marked for scanning.
    201   1.1  dyoung  */
    202   1.1  dyoung void
    203   1.1  dyoung ieee80211_next_scan(struct ifnet *ifp)
    204   1.1  dyoung {
    205   1.1  dyoung 	struct ieee80211com *ic = (void *)ifp;
    206   1.1  dyoung 	struct ieee80211_channel *chan;
    207   1.1  dyoung 
    208   1.1  dyoung 	chan = ic->ic_bss->ni_chan;
    209   1.1  dyoung 	for (;;) {
    210   1.1  dyoung 		if (++chan > &ic->ic_channels[IEEE80211_CHAN_MAX])
    211   1.1  dyoung 			chan = &ic->ic_channels[0];
    212   1.1  dyoung 		if (isset(ic->ic_chan_scan, ieee80211_chan2ieee(ic, chan))) {
    213   1.1  dyoung 			/*
    214   1.1  dyoung 			 * Honor channels marked passive-only
    215   1.1  dyoung 			 * during an active scan.
    216   1.1  dyoung 			 */
    217   1.1  dyoung 			if ((ic->ic_flags & IEEE80211_F_ASCAN) == 0 ||
    218   1.1  dyoung 			    (chan->ic_flags & IEEE80211_CHAN_PASSIVE) == 0)
    219   1.1  dyoung 				break;
    220   1.1  dyoung 		}
    221   1.1  dyoung 		if (chan == ic->ic_bss->ni_chan) {
    222   1.1  dyoung 			ieee80211_end_scan(ifp);
    223   1.1  dyoung 			return;
    224   1.1  dyoung 		}
    225   1.1  dyoung 	}
    226   1.1  dyoung 	clrbit(ic->ic_chan_scan, ieee80211_chan2ieee(ic, chan));
    227   1.1  dyoung 	IEEE80211_DPRINTF(("ieee80211_next_scan: chan %d->%d\n",
    228   1.1  dyoung 	    ieee80211_chan2ieee(ic, ic->ic_bss->ni_chan),
    229   1.1  dyoung 	    ieee80211_chan2ieee(ic, chan)));
    230   1.1  dyoung 	ic->ic_bss->ni_chan = chan;
    231   1.1  dyoung 	ieee80211_new_state(ic, IEEE80211_S_SCAN, -1);
    232   1.1  dyoung }
    233   1.1  dyoung 
    234   1.1  dyoung void
    235   1.1  dyoung ieee80211_create_ibss(struct ieee80211com* ic, struct ieee80211_channel *chan)
    236   1.1  dyoung {
    237   1.1  dyoung 	struct ieee80211_node *ni;
    238   1.1  dyoung 	struct ifnet *ifp = &ic->ic_if;
    239   1.1  dyoung 
    240   1.1  dyoung 	ni = ic->ic_bss;
    241   1.1  dyoung 	if (ifp->if_flags & IFF_DEBUG)
    242   1.1  dyoung 		if_printf(ifp, "creating ibss\n");
    243   1.1  dyoung 	ic->ic_flags |= IEEE80211_F_SIBSS;
    244   1.1  dyoung 	ni->ni_chan = chan;
    245   1.1  dyoung 	ni->ni_rates = ic->ic_sup_rates[ieee80211_chan2mode(ic, ni->ni_chan)];
    246   1.1  dyoung 	IEEE80211_ADDR_COPY(ni->ni_macaddr, ic->ic_myaddr);
    247   1.1  dyoung 	IEEE80211_ADDR_COPY(ni->ni_bssid, ic->ic_myaddr);
    248  1.16  dyoung 	if (ic->ic_opmode == IEEE80211_M_IBSS) {
    249  1.16  dyoung 		if ((ic->ic_flags & IEEE80211_F_DESBSSID) != 0)
    250  1.16  dyoung 			IEEE80211_ADDR_COPY(ni->ni_bssid, ic->ic_des_bssid);
    251  1.16  dyoung 		else
    252  1.16  dyoung 			ni->ni_bssid[0] |= 0x02;	/* local bit for IBSS */
    253  1.16  dyoung 	}
    254   1.1  dyoung 	ni->ni_esslen = ic->ic_des_esslen;
    255   1.1  dyoung 	memcpy(ni->ni_essid, ic->ic_des_essid, ni->ni_esslen);
    256   1.1  dyoung 	ni->ni_rssi = 0;
    257   1.1  dyoung 	ni->ni_rstamp = 0;
    258   1.1  dyoung 	memset(ni->ni_tstamp, 0, sizeof(ni->ni_tstamp));
    259   1.1  dyoung 	ni->ni_intval = ic->ic_lintval;
    260   1.1  dyoung 	ni->ni_capinfo = IEEE80211_CAPINFO_IBSS;
    261   1.1  dyoung 	if (ic->ic_flags & IEEE80211_F_WEPON)
    262   1.1  dyoung 		ni->ni_capinfo |= IEEE80211_CAPINFO_PRIVACY;
    263   1.1  dyoung 	if (ic->ic_phytype == IEEE80211_T_FH) {
    264   1.1  dyoung 		ni->ni_fhdwell = 200;	/* XXX */
    265   1.1  dyoung 		ni->ni_fhindex = 1;
    266   1.1  dyoung 	}
    267   1.1  dyoung 	ieee80211_new_state(ic, IEEE80211_S_RUN, -1);
    268   1.1  dyoung }
    269   1.1  dyoung 
    270   1.5  dyoung int
    271   1.5  dyoung ieee80211_match_bss(struct ieee80211com *ic, struct ieee80211_node *ni)
    272   1.5  dyoung {
    273   1.5  dyoung         u_int8_t rate;
    274   1.5  dyoung         int fail;
    275   1.5  dyoung 
    276   1.5  dyoung 	fail = 0;
    277   1.5  dyoung 	if (isclr(ic->ic_chan_active, ieee80211_chan2ieee(ic, ni->ni_chan)))
    278   1.5  dyoung 		fail |= 0x01;
    279   1.5  dyoung 	if (ic->ic_des_chan != IEEE80211_CHAN_ANYC &&
    280   1.5  dyoung 	    ni->ni_chan != ic->ic_des_chan)
    281   1.5  dyoung 		fail |= 0x01;
    282   1.5  dyoung 	if (ic->ic_opmode == IEEE80211_M_IBSS) {
    283   1.5  dyoung 		if ((ni->ni_capinfo & IEEE80211_CAPINFO_IBSS) == 0)
    284   1.5  dyoung 			fail |= 0x02;
    285   1.5  dyoung 	} else {
    286   1.5  dyoung 		if ((ni->ni_capinfo & IEEE80211_CAPINFO_ESS) == 0)
    287   1.5  dyoung 			fail |= 0x02;
    288   1.5  dyoung 	}
    289   1.5  dyoung 	if (ic->ic_flags & IEEE80211_F_WEPON) {
    290   1.5  dyoung 		if ((ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) == 0)
    291   1.5  dyoung 			fail |= 0x04;
    292   1.5  dyoung 	} else {
    293  1.11  dyoung 		/* XXX does this mean privacy is supported or required? */
    294   1.5  dyoung 		if (ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY)
    295   1.5  dyoung 			fail |= 0x04;
    296   1.5  dyoung 	}
    297   1.5  dyoung 	rate = ieee80211_fix_rate(ic, ni, IEEE80211_F_DONEGO);
    298   1.5  dyoung 	if (rate & IEEE80211_RATE_BASIC)
    299   1.5  dyoung 		fail |= 0x08;
    300   1.5  dyoung 	if (ic->ic_des_esslen != 0 &&
    301   1.5  dyoung 	    (ni->ni_esslen != ic->ic_des_esslen ||
    302  1.11  dyoung 	     memcmp(ni->ni_essid, ic->ic_des_essid, ic->ic_des_esslen) != 0))
    303   1.5  dyoung 		fail |= 0x10;
    304   1.5  dyoung 	if ((ic->ic_flags & IEEE80211_F_DESBSSID) &&
    305   1.5  dyoung 	    !IEEE80211_ADDR_EQ(ic->ic_des_bssid, ni->ni_bssid))
    306   1.5  dyoung 		fail |= 0x20;
    307  1.11  dyoung #ifdef IEEE80211_DEBUG
    308  1.12  dyoung 	if (ic->ic_if.if_flags & IFF_DEBUG) {
    309   1.5  dyoung 		printf(" %c %s", fail ? '-' : '+',
    310   1.5  dyoung 		    ether_sprintf(ni->ni_macaddr));
    311   1.5  dyoung 		printf(" %s%c", ether_sprintf(ni->ni_bssid),
    312   1.5  dyoung 		    fail & 0x20 ? '!' : ' ');
    313   1.5  dyoung 		printf(" %3d%c", ieee80211_chan2ieee(ic, ni->ni_chan),
    314   1.5  dyoung 			fail & 0x01 ? '!' : ' ');
    315   1.5  dyoung 		printf(" %+4d", ni->ni_rssi);
    316   1.5  dyoung 		printf(" %2dM%c", (rate & IEEE80211_RATE_VAL) / 2,
    317   1.5  dyoung 		    fail & 0x08 ? '!' : ' ');
    318   1.5  dyoung 		printf(" %4s%c",
    319   1.5  dyoung 		    (ni->ni_capinfo & IEEE80211_CAPINFO_ESS) ? "ess" :
    320   1.5  dyoung 		    (ni->ni_capinfo & IEEE80211_CAPINFO_IBSS) ? "ibss" :
    321   1.5  dyoung 		    "????",
    322   1.5  dyoung 		    fail & 0x02 ? '!' : ' ');
    323   1.5  dyoung 		printf(" %3s%c ",
    324   1.5  dyoung 		    (ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) ?
    325   1.5  dyoung 		    "wep" : "no",
    326   1.5  dyoung 		    fail & 0x04 ? '!' : ' ');
    327   1.5  dyoung 		ieee80211_print_essid(ni->ni_essid, ni->ni_esslen);
    328   1.5  dyoung 		printf("%s\n", fail & 0x10 ? "!" : "");
    329   1.5  dyoung 	}
    330  1.11  dyoung #endif
    331   1.5  dyoung 	return fail;
    332   1.5  dyoung }
    333   1.5  dyoung 
    334   1.1  dyoung /*
    335   1.1  dyoung  * Complete a scan of potential channels.
    336   1.1  dyoung  */
    337   1.1  dyoung void
    338   1.1  dyoung ieee80211_end_scan(struct ifnet *ifp)
    339   1.1  dyoung {
    340   1.1  dyoung 	struct ieee80211com *ic = (void *)ifp;
    341   1.1  dyoung 	struct ieee80211_node *ni, *nextbs, *selbs;
    342   1.1  dyoung 	int i, fail;
    343   1.1  dyoung 
    344   1.1  dyoung 	ic->ic_flags &= ~IEEE80211_F_ASCAN;
    345   1.1  dyoung 	ni = TAILQ_FIRST(&ic->ic_node);
    346   1.1  dyoung 
    347   1.1  dyoung 	if (ic->ic_opmode == IEEE80211_M_HOSTAP) {
    348   1.1  dyoung 		/* XXX off stack? */
    349   1.1  dyoung 		u_char occupied[roundup(IEEE80211_CHAN_MAX, NBBY)];
    350   1.1  dyoung 		/*
    351   1.1  dyoung 		 * The passive scan to look for existing AP's completed,
    352   1.1  dyoung 		 * select a channel to camp on.  Identify the channels
    353   1.1  dyoung 		 * that already have one or more AP's and try to locate
    354   1.1  dyoung 		 * an unnoccupied one.  If that fails, pick a random
    355   1.1  dyoung 		 * channel from the active set.
    356   1.1  dyoung 		 */
    357   1.1  dyoung 		for (; ni != NULL; ni = nextbs) {
    358   1.1  dyoung 			ieee80211_ref_node(ni);
    359   1.1  dyoung 			nextbs = TAILQ_NEXT(ni, ni_list);
    360   1.1  dyoung 			setbit(occupied, ieee80211_chan2ieee(ic, ni->ni_chan));
    361   1.1  dyoung 			ieee80211_free_node(ic, ni);
    362   1.1  dyoung 		}
    363   1.1  dyoung 		for (i = 0; i < IEEE80211_CHAN_MAX; i++)
    364   1.1  dyoung 			if (isset(ic->ic_chan_active, i) && isclr(occupied, i))
    365   1.1  dyoung 				break;
    366   1.1  dyoung 		if (i == IEEE80211_CHAN_MAX) {
    367   1.1  dyoung 			fail = arc4random() & 3;	/* random 0-3 */
    368   1.1  dyoung 			for (i = 0; i < IEEE80211_CHAN_MAX; i++)
    369   1.1  dyoung 				if (isset(ic->ic_chan_active, i) && fail-- == 0)
    370   1.1  dyoung 					break;
    371   1.1  dyoung 		}
    372   1.1  dyoung 		ieee80211_create_ibss(ic, &ic->ic_channels[i]);
    373   1.1  dyoung 		return;
    374   1.1  dyoung 	}
    375   1.1  dyoung 	if (ni == NULL) {
    376   1.1  dyoung 		IEEE80211_DPRINTF(("%s: no scan candidate\n", __func__));
    377   1.1  dyoung   notfound:
    378   1.1  dyoung 		if (ic->ic_opmode == IEEE80211_M_IBSS &&
    379   1.1  dyoung 		    (ic->ic_flags & IEEE80211_F_IBSSON) &&
    380   1.1  dyoung 		    ic->ic_des_esslen != 0) {
    381   1.1  dyoung 			ieee80211_create_ibss(ic, ic->ic_ibss_chan);
    382   1.1  dyoung 			return;
    383   1.1  dyoung 		}
    384   1.1  dyoung 		/*
    385   1.1  dyoung 		 * Reset the list of channels to scan and start again.
    386   1.1  dyoung 		 */
    387   1.1  dyoung 		ieee80211_reset_scan(ifp);
    388   1.1  dyoung 		ieee80211_next_scan(ifp);
    389   1.1  dyoung 		return;
    390   1.1  dyoung 	}
    391   1.1  dyoung 	selbs = NULL;
    392   1.1  dyoung 	if (ifp->if_flags & IFF_DEBUG)
    393   1.1  dyoung 		if_printf(ifp, "\tmacaddr          bssid         chan  rssi rate flag  wep  essid\n");
    394   1.1  dyoung 	for (; ni != NULL; ni = nextbs) {
    395   1.1  dyoung 		ieee80211_ref_node(ni);
    396   1.1  dyoung 		nextbs = TAILQ_NEXT(ni, ni_list);
    397   1.1  dyoung 		if (ni->ni_fails) {
    398   1.1  dyoung 			/*
    399   1.1  dyoung 			 * The configuration of the access points may change
    400   1.1  dyoung 			 * during my scan.  So delete the entry for the AP
    401   1.1  dyoung 			 * and retry to associate if there is another beacon.
    402   1.1  dyoung 			 */
    403   1.1  dyoung 			if (ni->ni_fails++ > 2)
    404   1.1  dyoung 				ieee80211_free_node(ic, ni);
    405   1.1  dyoung 			continue;
    406   1.1  dyoung 		}
    407   1.5  dyoung 		if (ieee80211_match_bss(ic, ni) == 0) {
    408   1.1  dyoung 			if (selbs == NULL)
    409   1.1  dyoung 				selbs = ni;
    410   1.1  dyoung 			else if (ni->ni_rssi > selbs->ni_rssi) {
    411   1.1  dyoung 				ieee80211_unref_node(&selbs);
    412   1.1  dyoung 				selbs = ni;
    413   1.1  dyoung 			} else
    414   1.1  dyoung 				ieee80211_unref_node(&ni);
    415   1.1  dyoung 		} else {
    416   1.1  dyoung 			ieee80211_unref_node(&ni);
    417   1.1  dyoung 		}
    418   1.1  dyoung 	}
    419   1.1  dyoung 	if (selbs == NULL)
    420   1.1  dyoung 		goto notfound;
    421   1.1  dyoung 	(*ic->ic_node_copy)(ic, ic->ic_bss, selbs);
    422   1.1  dyoung 	if (ic->ic_opmode == IEEE80211_M_IBSS) {
    423   1.1  dyoung 		ieee80211_fix_rate(ic, ic->ic_bss, IEEE80211_F_DOFRATE |
    424   1.1  dyoung 		    IEEE80211_F_DONEGO | IEEE80211_F_DODEL);
    425   1.1  dyoung 		if (ic->ic_bss->ni_rates.rs_nrates == 0) {
    426   1.1  dyoung 			selbs->ni_fails++;
    427   1.1  dyoung 			ieee80211_unref_node(&selbs);
    428   1.1  dyoung 			goto notfound;
    429   1.1  dyoung 		}
    430   1.1  dyoung 		ieee80211_unref_node(&selbs);
    431  1.11  dyoung 		/*
    432  1.11  dyoung 		 * Discard scan set; the nodes have a refcnt of zero
    433  1.11  dyoung 		 * and have not asked the driver to setup private
    434  1.11  dyoung 		 * node state.  Let them be repopulated on demand either
    435  1.11  dyoung 		 * through transmission (ieee80211_find_txnode) or receipt
    436  1.11  dyoung 		 * of a probe response (to be added).
    437  1.11  dyoung 		 */
    438  1.11  dyoung 		ieee80211_free_allnodes(ic);
    439   1.1  dyoung 		ieee80211_new_state(ic, IEEE80211_S_RUN, -1);
    440   1.1  dyoung 	} else {
    441   1.1  dyoung 		ieee80211_unref_node(&selbs);
    442   1.1  dyoung 		ieee80211_new_state(ic, IEEE80211_S_AUTH, -1);
    443   1.1  dyoung 	}
    444   1.1  dyoung }
    445   1.1  dyoung 
    446   1.5  dyoung int
    447   1.5  dyoung ieee80211_get_rate(struct ieee80211com *ic)
    448   1.5  dyoung {
    449   1.5  dyoung 	u_int8_t (*rates)[IEEE80211_RATE_MAXSIZE];
    450   1.5  dyoung 	int rate;
    451   1.5  dyoung 
    452   1.5  dyoung 	rates = &ic->ic_bss->ni_rates.rs_rates;
    453   1.5  dyoung 
    454   1.5  dyoung 	if (ic->ic_fixed_rate != -1)
    455   1.5  dyoung 		rate = (*rates)[ic->ic_fixed_rate];
    456   1.5  dyoung 	else if (ic->ic_state == IEEE80211_S_RUN)
    457   1.5  dyoung 		rate = (*rates)[ic->ic_bss->ni_txrate];
    458   1.5  dyoung 	else
    459   1.5  dyoung 		rate = 0;
    460   1.5  dyoung 
    461   1.5  dyoung 	return rate & IEEE80211_RATE_VAL;
    462   1.5  dyoung }
    463   1.5  dyoung 
    464   1.1  dyoung static struct ieee80211_node *
    465   1.1  dyoung ieee80211_node_alloc(struct ieee80211com *ic)
    466   1.1  dyoung {
    467  1.11  dyoung 	struct ieee80211_node *ni;
    468  1.11  dyoung 	MALLOC(ni, struct ieee80211_node *, sizeof(struct ieee80211_node),
    469  1.11  dyoung 		M_80211_NODE, M_NOWAIT | M_ZERO);
    470  1.11  dyoung 	return ni;
    471   1.1  dyoung }
    472   1.1  dyoung 
    473   1.1  dyoung static void
    474   1.1  dyoung ieee80211_node_free(struct ieee80211com *ic, struct ieee80211_node *ni)
    475   1.1  dyoung {
    476   1.6  dyoung 	if (ni->ni_challenge != NULL) {
    477  1.11  dyoung 		FREE(ni->ni_challenge, M_DEVBUF);
    478   1.6  dyoung 		ni->ni_challenge = NULL;
    479   1.6  dyoung 	}
    480  1.11  dyoung 	FREE(ni, M_80211_NODE);
    481   1.1  dyoung }
    482   1.1  dyoung 
    483   1.1  dyoung static void
    484   1.1  dyoung ieee80211_node_copy(struct ieee80211com *ic,
    485   1.1  dyoung 	struct ieee80211_node *dst, const struct ieee80211_node *src)
    486   1.1  dyoung {
    487   1.1  dyoung 	*dst = *src;
    488   1.6  dyoung 	dst->ni_challenge = NULL;
    489   1.1  dyoung }
    490   1.1  dyoung 
    491   1.9  dyoung static u_int8_t
    492   1.9  dyoung ieee80211_node_getrssi(struct ieee80211com *ic, struct ieee80211_node *ni)
    493   1.9  dyoung {
    494   1.9  dyoung 	return ni->ni_rssi;
    495   1.9  dyoung }
    496   1.9  dyoung 
    497   1.1  dyoung static void
    498   1.1  dyoung ieee80211_setup_node(struct ieee80211com *ic,
    499   1.1  dyoung 	struct ieee80211_node *ni, u_int8_t *macaddr)
    500   1.1  dyoung {
    501   1.1  dyoung 	int hash;
    502   1.2  dyoung 	ieee80211_node_critsec_decl(s);
    503   1.1  dyoung 
    504   1.1  dyoung 	IEEE80211_ADDR_COPY(ni->ni_macaddr, macaddr);
    505   1.1  dyoung 	hash = IEEE80211_NODE_HASH(macaddr);
    506   1.1  dyoung 	ni->ni_refcnt = 1;		/* mark referenced */
    507   1.2  dyoung 	ieee80211_node_critsec_begin(ic, s);
    508   1.1  dyoung 	TAILQ_INSERT_TAIL(&ic->ic_node, ni, ni_list);
    509   1.1  dyoung 	LIST_INSERT_HEAD(&ic->ic_hash[hash], ni, ni_hash);
    510   1.1  dyoung 	/*
    511   1.1  dyoung 	 * Note we don't enable the inactive timer when acting
    512   1.1  dyoung 	 * as a station.  Nodes created in this mode represent
    513   1.1  dyoung 	 * AP's identified while scanning.  If we time them out
    514   1.1  dyoung 	 * then several things happen: we can't return the data
    515   1.1  dyoung 	 * to users to show the list of AP's we encountered, and
    516   1.1  dyoung 	 * more importantly, we'll incorrectly deauthenticate
    517   1.1  dyoung 	 * ourself because the inactivity timer will kick us off.
    518   1.1  dyoung 	 */
    519   1.1  dyoung 	if (ic->ic_opmode != IEEE80211_M_STA)
    520   1.1  dyoung 		ic->ic_inact_timer = IEEE80211_INACT_WAIT;
    521   1.2  dyoung 	ieee80211_node_critsec_end(ic, s);
    522   1.1  dyoung }
    523   1.1  dyoung 
    524   1.1  dyoung struct ieee80211_node *
    525   1.1  dyoung ieee80211_alloc_node(struct ieee80211com *ic, u_int8_t *macaddr)
    526   1.1  dyoung {
    527   1.1  dyoung 	struct ieee80211_node *ni = (*ic->ic_node_alloc)(ic);
    528   1.1  dyoung 	if (ni != NULL)
    529   1.1  dyoung 		ieee80211_setup_node(ic, ni, macaddr);
    530  1.11  dyoung 	else
    531  1.11  dyoung 		ic->ic_stats.is_rx_nodealloc++;
    532   1.1  dyoung 	return ni;
    533   1.1  dyoung }
    534   1.1  dyoung 
    535   1.1  dyoung struct ieee80211_node *
    536   1.1  dyoung ieee80211_dup_bss(struct ieee80211com *ic, u_int8_t *macaddr)
    537   1.1  dyoung {
    538   1.1  dyoung 	struct ieee80211_node *ni = (*ic->ic_node_alloc)(ic);
    539   1.1  dyoung 	if (ni != NULL) {
    540   1.1  dyoung 		ieee80211_setup_node(ic, ni, macaddr);
    541  1.11  dyoung 		/*
    542  1.11  dyoung 		 * Inherit from ic_bss.
    543  1.11  dyoung 		 */
    544  1.11  dyoung 		IEEE80211_ADDR_COPY(ni->ni_bssid, ic->ic_bss->ni_bssid);
    545  1.11  dyoung 		ni->ni_chan = ic->ic_bss->ni_chan;
    546  1.11  dyoung 	} else
    547  1.11  dyoung 		ic->ic_stats.is_rx_nodealloc++;
    548   1.1  dyoung 	return ni;
    549   1.1  dyoung }
    550   1.1  dyoung 
    551  1.11  dyoung static struct ieee80211_node *
    552  1.11  dyoung _ieee80211_find_node(struct ieee80211com *ic, u_int8_t *macaddr)
    553   1.1  dyoung {
    554   1.1  dyoung 	struct ieee80211_node *ni;
    555   1.1  dyoung 	int hash;
    556  1.11  dyoung 
    557  1.11  dyoung #ifdef __FreeBSD__
    558  1.11  dyoung 	IEEE80211_NODE_LOCK_ASSERT(ic);
    559  1.11  dyoung #endif /* __FreeBSD__ */
    560   1.1  dyoung 
    561   1.1  dyoung 	hash = IEEE80211_NODE_HASH(macaddr);
    562   1.1  dyoung 	LIST_FOREACH(ni, &ic->ic_hash[hash], ni_hash) {
    563   1.1  dyoung 		if (IEEE80211_ADDR_EQ(ni->ni_macaddr, macaddr)) {
    564   1.2  dyoung 			ieee80211_node_incref(ni); /* mark referenced */
    565  1.11  dyoung 			return ni;
    566   1.1  dyoung 		}
    567   1.1  dyoung 	}
    568  1.11  dyoung 	return NULL;
    569  1.11  dyoung }
    570  1.11  dyoung 
    571  1.11  dyoung struct ieee80211_node *
    572  1.11  dyoung ieee80211_find_node(struct ieee80211com *ic, u_int8_t *macaddr)
    573  1.11  dyoung {
    574  1.11  dyoung 	struct ieee80211_node *ni;
    575  1.11  dyoung 	ieee80211_node_critsec_decl(s);
    576  1.11  dyoung 
    577  1.11  dyoung 	ieee80211_node_critsec_begin(ic, s);
    578  1.11  dyoung 	ni = _ieee80211_find_node(ic, macaddr);
    579   1.2  dyoung 	ieee80211_node_critsec_end(ic, s);
    580   1.7  dyoung 	return ni;
    581   1.7  dyoung }
    582   1.7  dyoung 
    583  1.11  dyoung /*
    584  1.11  dyoung  * Return a reference to the appropriate node for sending
    585  1.11  dyoung  * a data frame.  This handles node discovery in adhoc networks.
    586  1.11  dyoung  */
    587   1.7  dyoung struct ieee80211_node *
    588   1.7  dyoung ieee80211_find_txnode(struct ieee80211com *ic, u_int8_t *macaddr)
    589   1.7  dyoung {
    590   1.7  dyoung 	struct ieee80211_node *ni;
    591   1.7  dyoung 	ieee80211_node_critsec_decl(s);
    592   1.7  dyoung 
    593   1.7  dyoung 	/*
    594   1.7  dyoung 	 * The destination address should be in the node table
    595  1.11  dyoung 	 * unless we are operating in station mode or this is a
    596  1.11  dyoung 	 * multicast/broadcast frame.
    597   1.7  dyoung 	 */
    598  1.11  dyoung 	if (ic->ic_opmode == IEEE80211_M_STA || IEEE80211_IS_MULTICAST(macaddr))
    599   1.8  dyoung 		return ic->ic_bss;
    600   1.8  dyoung 
    601  1.11  dyoung 	/* XXX can't hold lock across dup_bss 'cuz of recursive locking */
    602   1.8  dyoung 	ieee80211_node_critsec_begin(ic, s);
    603  1.11  dyoung 	ni = _ieee80211_find_node(ic, macaddr);
    604  1.11  dyoung 	ieee80211_node_critsec_end(ic, s);
    605  1.11  dyoung 	if (ni == NULL &&
    606  1.11  dyoung 	    (ic->ic_opmode == IEEE80211_M_IBSS ||
    607  1.11  dyoung 	     ic->ic_opmode == IEEE80211_M_AHDEMO)) {
    608  1.11  dyoung 		/*
    609  1.11  dyoung 		 * Fake up a node; this handles node discovery in
    610  1.11  dyoung 		 * adhoc mode.  Note that for the driver's benefit
    611  1.11  dyoung 		 * we we treat this like an association so the driver
    612  1.11  dyoung 		 * has an opportunity to setup it's private state.
    613  1.11  dyoung 		 *
    614  1.11  dyoung 		 * XXX need better way to handle this; issue probe
    615  1.11  dyoung 		 *     request so we can deduce rate set, etc.
    616  1.11  dyoung 		 */
    617  1.11  dyoung 		ni = ieee80211_dup_bss(ic, macaddr);
    618  1.11  dyoung 		if (ni != NULL) {
    619  1.11  dyoung 			/* XXX no rate negotiation; just dup */
    620  1.11  dyoung 			ni->ni_rates = ic->ic_bss->ni_rates;
    621  1.11  dyoung 			if (ic->ic_newassoc)
    622  1.11  dyoung 				(*ic->ic_newassoc)(ic, ni, 1);
    623   1.7  dyoung 		}
    624   1.7  dyoung 	}
    625   1.7  dyoung 	return ni;
    626   1.7  dyoung }
    627   1.7  dyoung 
    628   1.7  dyoung /*
    629   1.7  dyoung  * For some types of packet and for some operating modes, it is
    630   1.7  dyoung  * desirable to process a Rx packet using its sender's node-record
    631   1.7  dyoung  * instead of the BSS record, when that is possible.
    632   1.7  dyoung  *
    633   1.7  dyoung  * - AP mode: it is desirable to keep a node-record for every
    634   1.7  dyoung  *   authenticated/associated station *in the BSS*. For future use,
    635   1.7  dyoung  *   we also track neighboring APs, since they might belong to the
    636   1.7  dyoung  *   same ESSID.
    637   1.7  dyoung  *
    638   1.7  dyoung  * - IBSS mode: it is desirable to keep a node-record for every
    639   1.7  dyoung  *   station *in the BSS*.
    640   1.7  dyoung  *
    641   1.7  dyoung  * - monitor mode: it is desirable to keep a node-record for every
    642   1.7  dyoung  *   sender, regardless of BSS.
    643   1.7  dyoung  *
    644   1.7  dyoung  * - STA mode: the only available node-record is the BSS record,
    645   1.7  dyoung  *   ic->ic_bss.
    646   1.7  dyoung  *
    647   1.7  dyoung  * Of all the 802.11 Control packets, only the node-records for
    648   1.7  dyoung  * RTS packets node-record can be looked up.
    649   1.7  dyoung  *
    650   1.7  dyoung  * Return non-zero if the packet's node-record is kept, zero
    651   1.7  dyoung  * otherwise.
    652   1.7  dyoung  */
    653   1.7  dyoung static __inline int
    654   1.7  dyoung ieee80211_needs_rxnode(struct ieee80211com *ic, struct ieee80211_frame *wh,
    655   1.7  dyoung     u_int8_t **bssid)
    656   1.7  dyoung {
    657   1.7  dyoung 	struct ieee80211_node *bss = ic->ic_bss;
    658   1.7  dyoung 	int needsnode, rc = 0;
    659   1.7  dyoung 
    660   1.7  dyoung 	if (ic->ic_opmode == IEEE80211_M_STA)
    661   1.7  dyoung 		return 0;
    662   1.7  dyoung 
    663   1.7  dyoung 	needsnode = (ic->ic_opmode == IEEE80211_M_MONITOR);
    664   1.7  dyoung 
    665   1.7  dyoung 	*bssid = NULL;
    666   1.7  dyoung 
    667   1.7  dyoung 	switch (wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) {
    668   1.7  dyoung 	case IEEE80211_FC0_TYPE_CTL:
    669   1.7  dyoung 		return (wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) ==
    670   1.7  dyoung 		    IEEE80211_FC0_SUBTYPE_RTS;
    671   1.7  dyoung 
    672   1.7  dyoung 	case IEEE80211_FC0_TYPE_MGT:
    673   1.7  dyoung 		*bssid = wh->i_addr3;
    674   1.7  dyoung 		rc = IEEE80211_ADDR_EQ(*bssid, bss->ni_bssid);
    675   1.7  dyoung 		break;
    676   1.7  dyoung 	case IEEE80211_FC0_TYPE_DATA:
    677   1.7  dyoung 		switch (wh->i_fc[1] & IEEE80211_FC1_DIR_MASK) {
    678   1.7  dyoung 		case IEEE80211_FC1_DIR_NODS:
    679   1.7  dyoung 			*bssid = wh->i_addr3;
    680   1.7  dyoung 			if (ic->ic_opmode == IEEE80211_M_IBSS ||
    681   1.7  dyoung 			    ic->ic_opmode == IEEE80211_M_AHDEMO)
    682   1.7  dyoung 				rc = IEEE80211_ADDR_EQ(*bssid, bss->ni_bssid);
    683   1.7  dyoung 			break;
    684   1.7  dyoung 		case IEEE80211_FC1_DIR_TODS:
    685   1.7  dyoung 			*bssid = wh->i_addr1;
    686   1.7  dyoung 			if (ic->ic_opmode == IEEE80211_M_HOSTAP)
    687   1.7  dyoung 				rc = IEEE80211_ADDR_EQ(*bssid, bss->ni_bssid);
    688   1.7  dyoung 			break;
    689   1.7  dyoung 		case IEEE80211_FC1_DIR_FROMDS:
    690   1.7  dyoung 		case IEEE80211_FC1_DIR_DSTODS:
    691   1.7  dyoung 			*bssid = wh->i_addr2;
    692   1.7  dyoung 			rc = (ic->ic_opmode == IEEE80211_M_HOSTAP);
    693   1.7  dyoung 			break;
    694   1.7  dyoung 		}
    695   1.7  dyoung 		break;
    696   1.7  dyoung 	}
    697   1.7  dyoung 	return needsnode || rc;
    698   1.7  dyoung }
    699   1.7  dyoung 
    700   1.7  dyoung struct ieee80211_node *
    701   1.7  dyoung ieee80211_find_rxnode(struct ieee80211com *ic, struct ieee80211_frame *wh)
    702   1.7  dyoung {
    703   1.7  dyoung 	struct ieee80211_node *ni;
    704   1.7  dyoung 	const static u_int8_t zero[IEEE80211_ADDR_LEN];
    705   1.7  dyoung 	u_int8_t *bssid;
    706   1.7  dyoung 	ieee80211_node_critsec_decl(s);
    707   1.7  dyoung 
    708   1.7  dyoung 	if (!ieee80211_needs_rxnode(ic, wh, &bssid))
    709   1.7  dyoung 	        return ieee80211_ref_node(ic->ic_bss);
    710   1.7  dyoung 
    711  1.11  dyoung 	ieee80211_node_critsec_begin(ic, s);
    712  1.11  dyoung 	ni = _ieee80211_find_node(ic, wh->i_addr2);
    713  1.11  dyoung 	ieee80211_node_critsec_end(ic, s);
    714   1.7  dyoung 
    715  1.15  dyoung 	if (ni != NULL)
    716  1.15  dyoung 		return ni;
    717  1.15  dyoung 
    718  1.15  dyoung 	if (ic->ic_opmode == IEEE80211_M_HOSTAP)
    719  1.15  dyoung 		return ieee80211_ref_node(ic->ic_bss);
    720  1.15  dyoung 
    721  1.15  dyoung 	/* XXX see remarks in ieee80211_find_txnode */
    722  1.15  dyoung 	/* XXX no rate negotiation; just dup */
    723  1.15  dyoung 	if ((ni = ieee80211_dup_bss(ic, wh->i_addr2)) == NULL)
    724  1.15  dyoung 		return ieee80211_ref_node(ic->ic_bss);
    725  1.15  dyoung 
    726  1.15  dyoung 	IEEE80211_ADDR_COPY(ni->ni_bssid, (bssid != NULL) ? bssid : zero);
    727  1.15  dyoung 
    728  1.15  dyoung 	ni->ni_rates = ic->ic_bss->ni_rates;
    729  1.15  dyoung 	if (ic->ic_newassoc)
    730  1.15  dyoung 		(*ic->ic_newassoc)(ic, ni, 1);
    731  1.15  dyoung 
    732  1.15  dyoung 	IEEE80211_DPRINTF(("%s: faked-up node %p for %s\n", __func__, ni,
    733  1.15  dyoung 	    ether_sprintf(wh->i_addr2)));
    734  1.15  dyoung 
    735  1.15  dyoung 	return ieee80211_ref_node(ni);
    736   1.1  dyoung }
    737   1.1  dyoung 
    738   1.1  dyoung /*
    739   1.1  dyoung  * Like find but search based on the channel too.
    740   1.1  dyoung  */
    741   1.1  dyoung struct ieee80211_node *
    742   1.1  dyoung ieee80211_lookup_node(struct ieee80211com *ic,
    743   1.1  dyoung 	u_int8_t *macaddr, struct ieee80211_channel *chan)
    744   1.1  dyoung {
    745   1.1  dyoung 	struct ieee80211_node *ni;
    746   1.1  dyoung 	int hash;
    747   1.2  dyoung 	ieee80211_node_critsec_decl(s);
    748   1.1  dyoung 
    749   1.1  dyoung 	hash = IEEE80211_NODE_HASH(macaddr);
    750   1.2  dyoung 	ieee80211_node_critsec_begin(ic, s);
    751   1.1  dyoung 	LIST_FOREACH(ni, &ic->ic_hash[hash], ni_hash) {
    752  1.11  dyoung 		if (IEEE80211_ADDR_EQ(ni->ni_macaddr, macaddr) &&
    753  1.11  dyoung 		    ni->ni_chan == chan) {
    754   1.2  dyoung 			ieee80211_node_incref(ni);/* mark referenced */
    755   1.1  dyoung 			break;
    756   1.1  dyoung 		}
    757   1.1  dyoung 	}
    758   1.2  dyoung 	ieee80211_node_critsec_end(ic, s);
    759   1.1  dyoung 	return ni;
    760   1.1  dyoung }
    761   1.1  dyoung 
    762   1.1  dyoung static void
    763   1.1  dyoung _ieee80211_free_node(struct ieee80211com *ic, struct ieee80211_node *ni)
    764   1.1  dyoung {
    765  1.10  dyoung 	IASSERT(ni != ic->ic_bss, ("freeing bss node"));
    766   1.1  dyoung 
    767   1.5  dyoung 	IEEE80211_AID_CLR(ni->ni_associd, ic->ic_aid_bitmap);
    768   1.1  dyoung 	TAILQ_REMOVE(&ic->ic_node, ni, ni_list);
    769   1.1  dyoung 	LIST_REMOVE(ni, ni_hash);
    770   1.5  dyoung 	if (!IF_IS_EMPTY(&ni->ni_savedq)) {
    771   1.5  dyoung 		IF_PURGE(&ni->ni_savedq);
    772   1.5  dyoung 		if (ic->ic_set_tim)
    773   1.5  dyoung 			ic->ic_set_tim(ic, ni->ni_associd, 0);
    774   1.5  dyoung 	}
    775   1.1  dyoung 	if (TAILQ_EMPTY(&ic->ic_node))
    776   1.1  dyoung 		ic->ic_inact_timer = 0;
    777   1.1  dyoung 	(*ic->ic_node_free)(ic, ni);
    778   1.1  dyoung }
    779   1.1  dyoung 
    780   1.1  dyoung void
    781   1.1  dyoung ieee80211_free_node(struct ieee80211com *ic, struct ieee80211_node *ni)
    782   1.1  dyoung {
    783   1.2  dyoung 	ieee80211_node_critsec_decl(s);
    784   1.2  dyoung 
    785  1.10  dyoung 	IASSERT(ni != ic->ic_bss, ("freeing ic_bss"));
    786   1.1  dyoung 
    787   1.2  dyoung 	if (ieee80211_node_decref(ni) == 0) {
    788   1.2  dyoung 		ieee80211_node_critsec_begin(ic, s);
    789   1.1  dyoung 		_ieee80211_free_node(ic, ni);
    790   1.2  dyoung 		ieee80211_node_critsec_end(ic, s);
    791   1.1  dyoung 	}
    792   1.1  dyoung }
    793   1.1  dyoung 
    794   1.1  dyoung void
    795   1.1  dyoung ieee80211_free_allnodes(struct ieee80211com *ic)
    796   1.1  dyoung {
    797   1.1  dyoung 	struct ieee80211_node *ni;
    798   1.2  dyoung 	ieee80211_node_critsec_decl(s);
    799   1.1  dyoung 
    800   1.2  dyoung 	ieee80211_node_critsec_begin(ic, s);
    801   1.1  dyoung 	while ((ni = TAILQ_FIRST(&ic->ic_node)) != NULL)
    802   1.1  dyoung 		_ieee80211_free_node(ic, ni);
    803   1.2  dyoung 	ieee80211_node_critsec_end(ic, s);
    804   1.1  dyoung }
    805   1.1  dyoung 
    806   1.9  dyoung /*
    807   1.9  dyoung  * Timeout inactive nodes.  Note that we cannot hold the node
    808   1.9  dyoung  * lock while sending a frame as this would lead to a LOR.
    809   1.9  dyoung  * Instead we use a generation number to mark nodes that we've
    810   1.9  dyoung  * scanned and drop the lock and restart a scan if we have to
    811   1.9  dyoung  * time out a node.  Since we are single-threaded by virtue of
    812   1.9  dyoung  * controlling the inactivity timer we can be sure this will
    813   1.9  dyoung  * process each node only once.
    814   1.9  dyoung  */
    815   1.1  dyoung void
    816   1.1  dyoung ieee80211_timeout_nodes(struct ieee80211com *ic)
    817   1.1  dyoung {
    818   1.9  dyoung 	struct ieee80211_node *ni;
    819   1.2  dyoung 	ieee80211_node_critsec_decl(s);
    820   1.9  dyoung 	u_int gen = ic->ic_scangen++;		/* NB: ok 'cuz single-threaded*/
    821   1.1  dyoung 
    822   1.9  dyoung restart:
    823   1.2  dyoung 	ieee80211_node_critsec_begin(ic, s);
    824   1.9  dyoung 	TAILQ_FOREACH(ni, &ic->ic_node, ni_list) {
    825   1.9  dyoung 		if (ni->ni_scangen == gen)	/* previously handled */
    826   1.9  dyoung 			continue;
    827   1.9  dyoung 		ni->ni_scangen = gen;
    828  1.13  dyoung 		if (++ni->ni_inact > ieee80211_inact_max) {
    829   1.1  dyoung 			IEEE80211_DPRINTF(("station %s timed out "
    830   1.1  dyoung 			    "due to inactivity (%u secs)\n",
    831   1.1  dyoung 			    ether_sprintf(ni->ni_macaddr),
    832   1.1  dyoung 			    ni->ni_inact));
    833   1.1  dyoung 			/*
    834   1.1  dyoung 			 * Send a deauthenticate frame.
    835   1.9  dyoung 			 *
    836   1.9  dyoung 			 * Drop the node lock before sending the
    837   1.9  dyoung 			 * deauthentication frame in case the driver takes
    838   1.9  dyoung 			 * a lock, as this will result in a LOR between the
    839   1.9  dyoung 			 * node lock and the driver lock.
    840   1.1  dyoung 			 */
    841   1.9  dyoung 			ieee80211_node_critsec_end(ic, s);
    842   1.1  dyoung 			IEEE80211_SEND_MGMT(ic, ni,
    843   1.1  dyoung 			    IEEE80211_FC0_SUBTYPE_DEAUTH,
    844   1.1  dyoung 			    IEEE80211_REASON_AUTH_EXPIRE);
    845   1.1  dyoung 			ieee80211_free_node(ic, ni);
    846   1.9  dyoung 			ic->ic_stats.is_node_timeout++;
    847   1.9  dyoung 			goto restart;
    848   1.9  dyoung 		}
    849   1.1  dyoung 	}
    850   1.1  dyoung 	if (!TAILQ_EMPTY(&ic->ic_node))
    851   1.1  dyoung 		ic->ic_inact_timer = IEEE80211_INACT_WAIT;
    852   1.2  dyoung 	ieee80211_node_critsec_end(ic, s);
    853   1.1  dyoung }
    854   1.1  dyoung 
    855   1.1  dyoung void
    856   1.1  dyoung ieee80211_iterate_nodes(struct ieee80211com *ic, ieee80211_iter_func *f, void *arg)
    857   1.1  dyoung {
    858   1.1  dyoung 	struct ieee80211_node *ni;
    859   1.2  dyoung 	ieee80211_node_critsec_decl(s);
    860   1.1  dyoung 
    861   1.2  dyoung 	ieee80211_node_critsec_begin(ic, s);
    862   1.1  dyoung 	TAILQ_FOREACH(ni, &ic->ic_node, ni_list)
    863   1.1  dyoung 		(*f)(arg, ni);
    864   1.2  dyoung 	ieee80211_node_critsec_end(ic, s);
    865   1.1  dyoung }
    866