Home | History | Annotate | Line # | Download | only in net80211
ieee80211_node.c revision 1.35
      1  1.35   dyoung /*	$NetBSD: ieee80211_node.c,v 1.35 2004/10/04 07:17:41 dyoung Exp $	*/
      2   1.1   dyoung /*-
      3   1.1   dyoung  * Copyright (c) 2001 Atsushi Onoe
      4  1.22  mycroft  * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting
      5   1.1   dyoung  * All rights reserved.
      6   1.1   dyoung  *
      7   1.1   dyoung  * Redistribution and use in source and binary forms, with or without
      8   1.1   dyoung  * modification, are permitted provided that the following conditions
      9   1.1   dyoung  * are met:
     10   1.1   dyoung  * 1. Redistributions of source code must retain the above copyright
     11   1.1   dyoung  *    notice, this list of conditions and the following disclaimer.
     12   1.1   dyoung  * 2. Redistributions in binary form must reproduce the above copyright
     13   1.1   dyoung  *    notice, this list of conditions and the following disclaimer in the
     14   1.1   dyoung  *    documentation and/or other materials provided with the distribution.
     15   1.1   dyoung  * 3. The name of the author may not be used to endorse or promote products
     16   1.1   dyoung  *    derived from this software without specific prior written permission.
     17   1.1   dyoung  *
     18   1.1   dyoung  * Alternatively, this software may be distributed under the terms of the
     19   1.1   dyoung  * GNU General Public License ("GPL") version 2 as published by the Free
     20   1.1   dyoung  * Software Foundation.
     21   1.1   dyoung  *
     22   1.1   dyoung  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     23   1.1   dyoung  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     24   1.1   dyoung  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     25   1.1   dyoung  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     26   1.1   dyoung  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     27   1.1   dyoung  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     28   1.1   dyoung  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     29   1.1   dyoung  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     30   1.1   dyoung  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     31   1.1   dyoung  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     32   1.1   dyoung  */
     33   1.1   dyoung 
     34   1.1   dyoung #include <sys/cdefs.h>
     35   1.3   dyoung #ifdef __FreeBSD__
     36  1.11   dyoung __FBSDID("$FreeBSD: src/sys/net80211/ieee80211_node.c,v 1.22 2004/04/05 04:15:55 sam Exp $");
     37   1.3   dyoung #else
     38  1.35   dyoung __KERNEL_RCSID(0, "$NetBSD: ieee80211_node.c,v 1.35 2004/10/04 07:17:41 dyoung Exp $");
     39   1.3   dyoung #endif
     40   1.1   dyoung 
     41   1.1   dyoung #include "opt_inet.h"
     42   1.1   dyoung 
     43   1.1   dyoung #include <sys/param.h>
     44   1.1   dyoung #include <sys/systm.h>
     45   1.1   dyoung #include <sys/mbuf.h>
     46   1.1   dyoung #include <sys/malloc.h>
     47   1.1   dyoung #include <sys/kernel.h>
     48   1.1   dyoung #include <sys/socket.h>
     49   1.1   dyoung #include <sys/sockio.h>
     50   1.1   dyoung #include <sys/endian.h>
     51   1.1   dyoung #include <sys/errno.h>
     52   1.4   dyoung #ifdef __FreeBSD__
     53   1.1   dyoung #include <sys/bus.h>
     54   1.4   dyoung #endif
     55   1.1   dyoung #include <sys/proc.h>
     56   1.1   dyoung #include <sys/sysctl.h>
     57   1.1   dyoung 
     58   1.2   dyoung #ifdef __FreeBSD__
     59   1.1   dyoung #include <machine/atomic.h>
     60   1.2   dyoung #endif
     61   1.1   dyoung 
     62   1.1   dyoung #include <net/if.h>
     63   1.1   dyoung #include <net/if_dl.h>
     64   1.1   dyoung #include <net/if_media.h>
     65   1.1   dyoung #include <net/if_arp.h>
     66   1.2   dyoung #ifdef __FreeBSD__
     67   1.1   dyoung #include <net/ethernet.h>
     68   1.4   dyoung #else
     69   1.4   dyoung #include <net/if_ether.h>
     70   1.2   dyoung #endif
     71   1.1   dyoung #include <net/if_llc.h>
     72   1.1   dyoung 
     73   1.1   dyoung #include <net80211/ieee80211_var.h>
     74   1.4   dyoung #include <net80211/ieee80211_compat.h>
     75   1.1   dyoung 
     76   1.1   dyoung #include <net/bpf.h>
     77   1.1   dyoung 
     78   1.1   dyoung #ifdef INET
     79   1.1   dyoung #include <netinet/in.h>
     80   1.4   dyoung #ifdef __FreeBSD__
     81   1.1   dyoung #include <netinet/if_ether.h>
     82   1.4   dyoung #else
     83   1.4   dyoung #include <net/if_ether.h>
     84   1.4   dyoung #endif
     85   1.1   dyoung #endif
     86   1.1   dyoung 
     87   1.1   dyoung static struct ieee80211_node *ieee80211_node_alloc(struct ieee80211com *);
     88   1.1   dyoung static void ieee80211_node_free(struct ieee80211com *, struct ieee80211_node *);
     89   1.1   dyoung static void ieee80211_node_copy(struct ieee80211com *,
     90   1.1   dyoung 		struct ieee80211_node *, const struct ieee80211_node *);
     91   1.9   dyoung static u_int8_t ieee80211_node_getrssi(struct ieee80211com *,
     92   1.9   dyoung 		struct ieee80211_node *);
     93   1.9   dyoung 
     94   1.1   dyoung static void ieee80211_setup_node(struct ieee80211com *ic,
     95   1.1   dyoung 		struct ieee80211_node *ni, u_int8_t *macaddr);
     96  1.33   dyoung static void ieee80211_free_node(struct ieee80211com *,
     97   1.1   dyoung 		struct ieee80211_node *);
     98   1.1   dyoung 
     99  1.11   dyoung MALLOC_DEFINE(M_80211_NODE, "80211node", "802.11 node state");
    100   1.9   dyoung 
    101   1.1   dyoung void
    102  1.23  mycroft ieee80211_node_attach(struct ieee80211com *ic)
    103   1.1   dyoung {
    104   1.1   dyoung 
    105   1.1   dyoung 	/* XXX need unit */
    106  1.23  mycroft 	IEEE80211_NODE_LOCK_INIT(ic, ic->ic_ifp->if_xname);
    107   1.1   dyoung 	TAILQ_INIT(&ic->ic_node);
    108   1.1   dyoung 	ic->ic_node_alloc = ieee80211_node_alloc;
    109   1.1   dyoung 	ic->ic_node_free = ieee80211_node_free;
    110   1.1   dyoung 	ic->ic_node_copy = ieee80211_node_copy;
    111   1.9   dyoung 	ic->ic_node_getrssi = ieee80211_node_getrssi;
    112   1.9   dyoung 	ic->ic_scangen = 1;
    113  1.33   dyoung 	ic->ic_max_nnodes = ieee80211_cache_size;
    114  1.22  mycroft 
    115  1.22  mycroft 	if (ic->ic_max_aid == 0)
    116  1.22  mycroft 		ic->ic_max_aid = IEEE80211_AID_DEF;
    117  1.22  mycroft 	else if (ic->ic_max_aid > IEEE80211_AID_MAX)
    118  1.22  mycroft 		ic->ic_max_aid = IEEE80211_AID_MAX;
    119  1.22  mycroft 	MALLOC(ic->ic_aid_bitmap, u_int32_t *,
    120  1.22  mycroft 		howmany(ic->ic_max_aid, 32) * sizeof(u_int32_t),
    121  1.22  mycroft 		M_DEVBUF, M_NOWAIT | M_ZERO);
    122  1.22  mycroft 	if (ic->ic_aid_bitmap == NULL) {
    123  1.22  mycroft 		/* XXX no way to recover */
    124  1.22  mycroft 		printf("%s: no memory for AID bitmap!\n", __func__);
    125  1.22  mycroft 		ic->ic_max_aid = 0;
    126  1.22  mycroft 	}
    127   1.1   dyoung }
    128   1.1   dyoung 
    129  1.33   dyoung static struct ieee80211_node *
    130  1.33   dyoung ieee80211_alloc_node_helper(struct ieee80211com *ic)
    131  1.33   dyoung {
    132  1.33   dyoung 	struct ieee80211_node *ni;
    133  1.33   dyoung 	if (ic->ic_nnodes >= ic->ic_max_nnodes)
    134  1.33   dyoung 		ieee80211_clean_nodes(ic);
    135  1.33   dyoung 	if (ic->ic_nnodes >= ic->ic_max_nnodes)
    136  1.33   dyoung 		return NULL;
    137  1.33   dyoung 	ni = (*ic->ic_node_alloc)(ic);
    138  1.33   dyoung 	if (ni != NULL)
    139  1.33   dyoung 		ic->ic_nnodes++;
    140  1.33   dyoung 	return ni;
    141  1.33   dyoung }
    142  1.33   dyoung 
    143   1.1   dyoung void
    144  1.23  mycroft ieee80211_node_lateattach(struct ieee80211com *ic)
    145   1.1   dyoung {
    146  1.11   dyoung 	struct ieee80211_node *ni;
    147   1.1   dyoung 
    148  1.33   dyoung 	ni = ieee80211_alloc_node_helper(ic);
    149  1.11   dyoung 	IASSERT(ni != NULL, ("unable to setup inital BSS node"));
    150  1.11   dyoung 	ni->ni_chan = IEEE80211_CHAN_ANYC;
    151  1.33   dyoung 	ic->ic_bss = ieee80211_ref_node(ni);
    152  1.11   dyoung 	ic->ic_txpower = IEEE80211_TXPOWER_MAX;
    153   1.1   dyoung }
    154   1.1   dyoung 
    155   1.1   dyoung void
    156  1.23  mycroft ieee80211_node_detach(struct ieee80211com *ic)
    157   1.1   dyoung {
    158   1.1   dyoung 
    159  1.23  mycroft 	if (ic->ic_bss != NULL) {
    160   1.1   dyoung 		(*ic->ic_node_free)(ic, ic->ic_bss);
    161  1.23  mycroft 		ic->ic_bss = NULL;
    162  1.23  mycroft 	}
    163   1.1   dyoung 	ieee80211_free_allnodes(ic);
    164   1.9   dyoung 	IEEE80211_NODE_LOCK_DESTROY(ic);
    165  1.22  mycroft         if (ic->ic_aid_bitmap != NULL)
    166  1.22  mycroft                 FREE(ic->ic_aid_bitmap, M_DEVBUF);
    167   1.1   dyoung }
    168   1.1   dyoung 
    169   1.1   dyoung /*
    170   1.1   dyoung  * AP scanning support.
    171   1.1   dyoung  */
    172   1.1   dyoung 
    173   1.1   dyoung /*
    174   1.1   dyoung  * Initialize the active channel set based on the set
    175   1.1   dyoung  * of available channels and the current PHY mode.
    176   1.1   dyoung  */
    177   1.1   dyoung static void
    178  1.23  mycroft ieee80211_reset_scan(struct ieee80211com *ic)
    179   1.1   dyoung {
    180   1.1   dyoung 
    181   1.1   dyoung 	memcpy(ic->ic_chan_scan, ic->ic_chan_active,
    182   1.1   dyoung 		sizeof(ic->ic_chan_active));
    183   1.1   dyoung 	/* NB: hack, setup so next_scan starts with the first channel */
    184   1.1   dyoung 	if (ic->ic_bss->ni_chan == IEEE80211_CHAN_ANYC)
    185   1.1   dyoung 		ic->ic_bss->ni_chan = &ic->ic_channels[IEEE80211_CHAN_MAX];
    186   1.1   dyoung }
    187   1.1   dyoung 
    188   1.1   dyoung /*
    189   1.1   dyoung  * Begin an active scan.
    190   1.1   dyoung  */
    191   1.1   dyoung void
    192  1.23  mycroft ieee80211_begin_scan(struct ieee80211com *ic)
    193   1.1   dyoung {
    194   1.1   dyoung 
    195   1.1   dyoung 	/*
    196   1.1   dyoung 	 * In all but hostap mode scanning starts off in
    197   1.1   dyoung 	 * an active mode before switching to passive.
    198   1.1   dyoung 	 */
    199   1.9   dyoung 	if (ic->ic_opmode != IEEE80211_M_HOSTAP) {
    200   1.1   dyoung 		ic->ic_flags |= IEEE80211_F_ASCAN;
    201   1.9   dyoung 		ic->ic_stats.is_scan_active++;
    202   1.9   dyoung 	} else
    203   1.9   dyoung 		ic->ic_stats.is_scan_passive++;
    204  1.20  mycroft 	IEEE80211_DPRINTF(ic, IEEE80211_MSG_SCAN, ("begin %s scan\n",
    205  1.20  mycroft 		(ic->ic_flags & IEEE80211_F_ASCAN) ?  "active" : "passive"));
    206   1.1   dyoung 	/*
    207   1.1   dyoung 	 * Clear scan state and flush any previously seen
    208   1.1   dyoung 	 * AP's.  Note that the latter assumes we don't act
    209   1.1   dyoung 	 * as both an AP and a station, otherwise we'll
    210   1.1   dyoung 	 * potentially flush state of stations associated
    211   1.1   dyoung 	 * with us.
    212   1.1   dyoung 	 */
    213  1.23  mycroft 	ieee80211_reset_scan(ic);
    214   1.1   dyoung 	ieee80211_free_allnodes(ic);
    215   1.1   dyoung 
    216   1.1   dyoung 	/* Scan the next channel. */
    217  1.23  mycroft 	ieee80211_next_scan(ic);
    218   1.1   dyoung }
    219   1.1   dyoung 
    220   1.1   dyoung /*
    221   1.1   dyoung  * Switch to the next channel marked for scanning.
    222   1.1   dyoung  */
    223   1.1   dyoung void
    224  1.23  mycroft ieee80211_next_scan(struct ieee80211com *ic)
    225   1.1   dyoung {
    226   1.1   dyoung 	struct ieee80211_channel *chan;
    227   1.1   dyoung 
    228   1.1   dyoung 	chan = ic->ic_bss->ni_chan;
    229   1.1   dyoung 	for (;;) {
    230   1.1   dyoung 		if (++chan > &ic->ic_channels[IEEE80211_CHAN_MAX])
    231   1.1   dyoung 			chan = &ic->ic_channels[0];
    232   1.1   dyoung 		if (isset(ic->ic_chan_scan, ieee80211_chan2ieee(ic, chan))) {
    233   1.1   dyoung 			/*
    234   1.1   dyoung 			 * Honor channels marked passive-only
    235   1.1   dyoung 			 * during an active scan.
    236   1.1   dyoung 			 */
    237   1.1   dyoung 			if ((ic->ic_flags & IEEE80211_F_ASCAN) == 0 ||
    238   1.1   dyoung 			    (chan->ic_flags & IEEE80211_CHAN_PASSIVE) == 0)
    239   1.1   dyoung 				break;
    240   1.1   dyoung 		}
    241   1.1   dyoung 		if (chan == ic->ic_bss->ni_chan) {
    242  1.23  mycroft 			ieee80211_end_scan(ic);
    243   1.1   dyoung 			return;
    244   1.1   dyoung 		}
    245   1.1   dyoung 	}
    246   1.1   dyoung 	clrbit(ic->ic_chan_scan, ieee80211_chan2ieee(ic, chan));
    247  1.18  mycroft 	IEEE80211_DPRINTF(ic, IEEE80211_MSG_SCAN,
    248  1.18  mycroft 		("%s: chan %d->%d\n", __func__,
    249  1.18  mycroft 		ieee80211_chan2ieee(ic, ic->ic_bss->ni_chan),
    250  1.18  mycroft 		ieee80211_chan2ieee(ic, chan)));
    251   1.1   dyoung 	ic->ic_bss->ni_chan = chan;
    252   1.1   dyoung 	ieee80211_new_state(ic, IEEE80211_S_SCAN, -1);
    253   1.1   dyoung }
    254   1.1   dyoung 
    255   1.1   dyoung void
    256   1.1   dyoung ieee80211_create_ibss(struct ieee80211com* ic, struct ieee80211_channel *chan)
    257   1.1   dyoung {
    258   1.1   dyoung 	struct ieee80211_node *ni;
    259   1.1   dyoung 
    260   1.1   dyoung 	ni = ic->ic_bss;
    261  1.20  mycroft 	IEEE80211_DPRINTF(ic, IEEE80211_MSG_SCAN, ("creating ibss\n"));
    262   1.1   dyoung 	ic->ic_flags |= IEEE80211_F_SIBSS;
    263   1.1   dyoung 	ni->ni_chan = chan;
    264   1.1   dyoung 	ni->ni_rates = ic->ic_sup_rates[ieee80211_chan2mode(ic, ni->ni_chan)];
    265   1.1   dyoung 	IEEE80211_ADDR_COPY(ni->ni_macaddr, ic->ic_myaddr);
    266   1.1   dyoung 	IEEE80211_ADDR_COPY(ni->ni_bssid, ic->ic_myaddr);
    267  1.16   dyoung 	if (ic->ic_opmode == IEEE80211_M_IBSS) {
    268  1.16   dyoung 		if ((ic->ic_flags & IEEE80211_F_DESBSSID) != 0)
    269  1.16   dyoung 			IEEE80211_ADDR_COPY(ni->ni_bssid, ic->ic_des_bssid);
    270  1.16   dyoung 		else
    271  1.16   dyoung 			ni->ni_bssid[0] |= 0x02;	/* local bit for IBSS */
    272  1.16   dyoung 	}
    273   1.1   dyoung 	ni->ni_esslen = ic->ic_des_esslen;
    274   1.1   dyoung 	memcpy(ni->ni_essid, ic->ic_des_essid, ni->ni_esslen);
    275   1.1   dyoung 	ni->ni_rssi = 0;
    276   1.1   dyoung 	ni->ni_rstamp = 0;
    277   1.1   dyoung 	memset(ni->ni_tstamp, 0, sizeof(ni->ni_tstamp));
    278   1.1   dyoung 	ni->ni_intval = ic->ic_lintval;
    279   1.1   dyoung 	ni->ni_capinfo = IEEE80211_CAPINFO_IBSS;
    280  1.21  mycroft 	if (ic->ic_flags & IEEE80211_F_PRIVACY)
    281   1.1   dyoung 		ni->ni_capinfo |= IEEE80211_CAPINFO_PRIVACY;
    282   1.1   dyoung 	if (ic->ic_phytype == IEEE80211_T_FH) {
    283   1.1   dyoung 		ni->ni_fhdwell = 200;	/* XXX */
    284   1.1   dyoung 		ni->ni_fhindex = 1;
    285   1.1   dyoung 	}
    286   1.1   dyoung 	ieee80211_new_state(ic, IEEE80211_S_RUN, -1);
    287   1.1   dyoung }
    288   1.1   dyoung 
    289   1.5   dyoung int
    290   1.5   dyoung ieee80211_match_bss(struct ieee80211com *ic, struct ieee80211_node *ni)
    291   1.5   dyoung {
    292   1.5   dyoung         u_int8_t rate;
    293   1.5   dyoung         int fail;
    294   1.5   dyoung 
    295   1.5   dyoung 	fail = 0;
    296   1.5   dyoung 	if (isclr(ic->ic_chan_active, ieee80211_chan2ieee(ic, ni->ni_chan)))
    297   1.5   dyoung 		fail |= 0x01;
    298   1.5   dyoung 	if (ic->ic_des_chan != IEEE80211_CHAN_ANYC &&
    299   1.5   dyoung 	    ni->ni_chan != ic->ic_des_chan)
    300   1.5   dyoung 		fail |= 0x01;
    301   1.5   dyoung 	if (ic->ic_opmode == IEEE80211_M_IBSS) {
    302   1.5   dyoung 		if ((ni->ni_capinfo & IEEE80211_CAPINFO_IBSS) == 0)
    303   1.5   dyoung 			fail |= 0x02;
    304   1.5   dyoung 	} else {
    305   1.5   dyoung 		if ((ni->ni_capinfo & IEEE80211_CAPINFO_ESS) == 0)
    306   1.5   dyoung 			fail |= 0x02;
    307   1.5   dyoung 	}
    308  1.21  mycroft 	if (ic->ic_flags & IEEE80211_F_PRIVACY) {
    309   1.5   dyoung 		if ((ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) == 0)
    310   1.5   dyoung 			fail |= 0x04;
    311   1.5   dyoung 	} else {
    312  1.11   dyoung 		/* XXX does this mean privacy is supported or required? */
    313   1.5   dyoung 		if (ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY)
    314   1.5   dyoung 			fail |= 0x04;
    315   1.5   dyoung 	}
    316   1.5   dyoung 	rate = ieee80211_fix_rate(ic, ni, IEEE80211_F_DONEGO);
    317   1.5   dyoung 	if (rate & IEEE80211_RATE_BASIC)
    318   1.5   dyoung 		fail |= 0x08;
    319   1.5   dyoung 	if (ic->ic_des_esslen != 0 &&
    320   1.5   dyoung 	    (ni->ni_esslen != ic->ic_des_esslen ||
    321  1.11   dyoung 	     memcmp(ni->ni_essid, ic->ic_des_essid, ic->ic_des_esslen) != 0))
    322   1.5   dyoung 		fail |= 0x10;
    323   1.5   dyoung 	if ((ic->ic_flags & IEEE80211_F_DESBSSID) &&
    324   1.5   dyoung 	    !IEEE80211_ADDR_EQ(ic->ic_des_bssid, ni->ni_bssid))
    325   1.5   dyoung 		fail |= 0x20;
    326  1.11   dyoung #ifdef IEEE80211_DEBUG
    327  1.12   dyoung 	if (ic->ic_if.if_flags & IFF_DEBUG) {
    328   1.5   dyoung 		printf(" %c %s", fail ? '-' : '+',
    329   1.5   dyoung 		    ether_sprintf(ni->ni_macaddr));
    330   1.5   dyoung 		printf(" %s%c", ether_sprintf(ni->ni_bssid),
    331   1.5   dyoung 		    fail & 0x20 ? '!' : ' ');
    332   1.5   dyoung 		printf(" %3d%c", ieee80211_chan2ieee(ic, ni->ni_chan),
    333   1.5   dyoung 			fail & 0x01 ? '!' : ' ');
    334   1.5   dyoung 		printf(" %+4d", ni->ni_rssi);
    335   1.5   dyoung 		printf(" %2dM%c", (rate & IEEE80211_RATE_VAL) / 2,
    336   1.5   dyoung 		    fail & 0x08 ? '!' : ' ');
    337   1.5   dyoung 		printf(" %4s%c",
    338   1.5   dyoung 		    (ni->ni_capinfo & IEEE80211_CAPINFO_ESS) ? "ess" :
    339   1.5   dyoung 		    (ni->ni_capinfo & IEEE80211_CAPINFO_IBSS) ? "ibss" :
    340   1.5   dyoung 		    "????",
    341   1.5   dyoung 		    fail & 0x02 ? '!' : ' ');
    342   1.5   dyoung 		printf(" %3s%c ",
    343   1.5   dyoung 		    (ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) ?
    344   1.5   dyoung 		    "wep" : "no",
    345   1.5   dyoung 		    fail & 0x04 ? '!' : ' ');
    346   1.5   dyoung 		ieee80211_print_essid(ni->ni_essid, ni->ni_esslen);
    347   1.5   dyoung 		printf("%s\n", fail & 0x10 ? "!" : "");
    348   1.5   dyoung 	}
    349  1.11   dyoung #endif
    350   1.5   dyoung 	return fail;
    351   1.5   dyoung }
    352   1.5   dyoung 
    353   1.1   dyoung /*
    354   1.1   dyoung  * Complete a scan of potential channels.
    355   1.1   dyoung  */
    356   1.1   dyoung void
    357  1.23  mycroft ieee80211_end_scan(struct ieee80211com *ic)
    358   1.1   dyoung {
    359   1.1   dyoung 	struct ieee80211_node *ni, *nextbs, *selbs;
    360   1.1   dyoung 	int i, fail;
    361   1.1   dyoung 
    362  1.23  mycroft 	IEEE80211_DPRINTF(ic, IEEE80211_MSG_SCAN, ("end %s scan\n",
    363  1.23  mycroft 		(ic->ic_flags & IEEE80211_F_ASCAN) ?  "active" : "passive"));
    364  1.23  mycroft 
    365   1.1   dyoung 	ic->ic_flags &= ~IEEE80211_F_ASCAN;
    366   1.1   dyoung 	ni = TAILQ_FIRST(&ic->ic_node);
    367   1.1   dyoung 
    368   1.1   dyoung 	if (ic->ic_opmode == IEEE80211_M_HOSTAP) {
    369   1.1   dyoung 		/* XXX off stack? */
    370   1.1   dyoung 		u_char occupied[roundup(IEEE80211_CHAN_MAX, NBBY)];
    371   1.1   dyoung 		/*
    372   1.1   dyoung 		 * The passive scan to look for existing AP's completed,
    373   1.1   dyoung 		 * select a channel to camp on.  Identify the channels
    374   1.1   dyoung 		 * that already have one or more AP's and try to locate
    375   1.1   dyoung 		 * an unnoccupied one.  If that fails, pick a random
    376   1.1   dyoung 		 * channel from the active set.
    377   1.1   dyoung 		 */
    378   1.1   dyoung 		for (; ni != NULL; ni = nextbs) {
    379   1.1   dyoung 			nextbs = TAILQ_NEXT(ni, ni_list);
    380   1.1   dyoung 			setbit(occupied, ieee80211_chan2ieee(ic, ni->ni_chan));
    381   1.1   dyoung 		}
    382   1.1   dyoung 		for (i = 0; i < IEEE80211_CHAN_MAX; i++)
    383   1.1   dyoung 			if (isset(ic->ic_chan_active, i) && isclr(occupied, i))
    384   1.1   dyoung 				break;
    385   1.1   dyoung 		if (i == IEEE80211_CHAN_MAX) {
    386   1.1   dyoung 			fail = arc4random() & 3;	/* random 0-3 */
    387   1.1   dyoung 			for (i = 0; i < IEEE80211_CHAN_MAX; i++)
    388   1.1   dyoung 				if (isset(ic->ic_chan_active, i) && fail-- == 0)
    389   1.1   dyoung 					break;
    390   1.1   dyoung 		}
    391   1.1   dyoung 		ieee80211_create_ibss(ic, &ic->ic_channels[i]);
    392   1.1   dyoung 		return;
    393   1.1   dyoung 	}
    394   1.1   dyoung 	if (ni == NULL) {
    395  1.18  mycroft 		IEEE80211_DPRINTF(ic, IEEE80211_MSG_SCAN,
    396  1.18  mycroft 			("%s: no scan candidate\n", __func__));
    397   1.1   dyoung   notfound:
    398   1.1   dyoung 		if (ic->ic_opmode == IEEE80211_M_IBSS &&
    399   1.1   dyoung 		    (ic->ic_flags & IEEE80211_F_IBSSON) &&
    400   1.1   dyoung 		    ic->ic_des_esslen != 0) {
    401   1.1   dyoung 			ieee80211_create_ibss(ic, ic->ic_ibss_chan);
    402   1.1   dyoung 			return;
    403   1.1   dyoung 		}
    404   1.1   dyoung 		/*
    405   1.1   dyoung 		 * Reset the list of channels to scan and start again.
    406   1.1   dyoung 		 */
    407  1.23  mycroft 		ieee80211_reset_scan(ic);
    408  1.23  mycroft 		ieee80211_next_scan(ic);
    409   1.1   dyoung 		return;
    410   1.1   dyoung 	}
    411   1.1   dyoung 	selbs = NULL;
    412  1.20  mycroft 	IEEE80211_DPRINTF(ic, IEEE80211_MSG_SCAN,
    413  1.20  mycroft 		("\tmacaddr          bssid         chan  rssi rate flag  wep  essid\n"));
    414   1.1   dyoung 	for (; ni != NULL; ni = nextbs) {
    415   1.1   dyoung 		nextbs = TAILQ_NEXT(ni, ni_list);
    416   1.1   dyoung 		if (ni->ni_fails) {
    417   1.1   dyoung 			/*
    418   1.1   dyoung 			 * The configuration of the access points may change
    419   1.1   dyoung 			 * during my scan.  So delete the entry for the AP
    420   1.1   dyoung 			 * and retry to associate if there is another beacon.
    421   1.1   dyoung 			 */
    422   1.1   dyoung 			if (ni->ni_fails++ > 2)
    423   1.1   dyoung 				ieee80211_free_node(ic, ni);
    424   1.1   dyoung 			continue;
    425   1.1   dyoung 		}
    426   1.5   dyoung 		if (ieee80211_match_bss(ic, ni) == 0) {
    427   1.1   dyoung 			if (selbs == NULL)
    428   1.1   dyoung 				selbs = ni;
    429  1.33   dyoung 			else if (ni->ni_rssi > selbs->ni_rssi)
    430   1.1   dyoung 				selbs = ni;
    431   1.1   dyoung 		}
    432   1.1   dyoung 	}
    433   1.1   dyoung 	if (selbs == NULL)
    434   1.1   dyoung 		goto notfound;
    435  1.33   dyoung 	ieee80211_node_newstate(selbs, IEEE80211_STA_BSS);
    436   1.1   dyoung 	(*ic->ic_node_copy)(ic, ic->ic_bss, selbs);
    437   1.1   dyoung 	if (ic->ic_opmode == IEEE80211_M_IBSS) {
    438   1.1   dyoung 		ieee80211_fix_rate(ic, ic->ic_bss, IEEE80211_F_DOFRATE |
    439   1.1   dyoung 		    IEEE80211_F_DONEGO | IEEE80211_F_DODEL);
    440  1.33   dyoung 		if (ic->ic_bss->ni_rates.rs_nrates == 0)
    441   1.1   dyoung 			goto notfound;
    442   1.1   dyoung 		ieee80211_new_state(ic, IEEE80211_S_RUN, -1);
    443   1.1   dyoung 	} else {
    444   1.1   dyoung 		ieee80211_new_state(ic, IEEE80211_S_AUTH, -1);
    445   1.1   dyoung 	}
    446   1.1   dyoung }
    447   1.1   dyoung 
    448   1.5   dyoung int
    449   1.5   dyoung ieee80211_get_rate(struct ieee80211com *ic)
    450   1.5   dyoung {
    451   1.5   dyoung 	u_int8_t (*rates)[IEEE80211_RATE_MAXSIZE];
    452   1.5   dyoung 	int rate;
    453   1.5   dyoung 
    454   1.5   dyoung 	rates = &ic->ic_bss->ni_rates.rs_rates;
    455   1.5   dyoung 
    456   1.5   dyoung 	if (ic->ic_fixed_rate != -1)
    457   1.5   dyoung 		rate = (*rates)[ic->ic_fixed_rate];
    458   1.5   dyoung 	else if (ic->ic_state == IEEE80211_S_RUN)
    459   1.5   dyoung 		rate = (*rates)[ic->ic_bss->ni_txrate];
    460   1.5   dyoung 	else
    461   1.5   dyoung 		rate = 0;
    462   1.5   dyoung 
    463   1.5   dyoung 	return rate & IEEE80211_RATE_VAL;
    464   1.5   dyoung }
    465   1.5   dyoung 
    466   1.1   dyoung static struct ieee80211_node *
    467   1.1   dyoung ieee80211_node_alloc(struct ieee80211com *ic)
    468   1.1   dyoung {
    469  1.11   dyoung 	struct ieee80211_node *ni;
    470  1.11   dyoung 	MALLOC(ni, struct ieee80211_node *, sizeof(struct ieee80211_node),
    471  1.11   dyoung 		M_80211_NODE, M_NOWAIT | M_ZERO);
    472  1.11   dyoung 	return ni;
    473   1.1   dyoung }
    474   1.1   dyoung 
    475   1.1   dyoung static void
    476  1.22  mycroft node_cleanup(struct ieee80211com *ic, struct ieee80211_node *ni)
    477  1.22  mycroft {
    478  1.22  mycroft         if (ni->ni_challenge != NULL) {
    479  1.22  mycroft                 FREE(ni->ni_challenge, M_DEVBUF);
    480  1.22  mycroft                 ni->ni_challenge = NULL;
    481  1.22  mycroft         }
    482  1.22  mycroft }
    483  1.22  mycroft 
    484  1.22  mycroft static void
    485   1.1   dyoung ieee80211_node_free(struct ieee80211com *ic, struct ieee80211_node *ni)
    486   1.1   dyoung {
    487  1.22  mycroft 	node_cleanup(ic, ni);
    488  1.11   dyoung 	FREE(ni, M_80211_NODE);
    489   1.1   dyoung }
    490   1.1   dyoung 
    491   1.1   dyoung static void
    492   1.1   dyoung ieee80211_node_copy(struct ieee80211com *ic,
    493   1.1   dyoung 	struct ieee80211_node *dst, const struct ieee80211_node *src)
    494   1.1   dyoung {
    495  1.22  mycroft 	node_cleanup(ic, dst);
    496   1.1   dyoung 	*dst = *src;
    497   1.6   dyoung 	dst->ni_challenge = NULL;
    498   1.1   dyoung }
    499   1.1   dyoung 
    500   1.9   dyoung static u_int8_t
    501   1.9   dyoung ieee80211_node_getrssi(struct ieee80211com *ic, struct ieee80211_node *ni)
    502   1.9   dyoung {
    503   1.9   dyoung 	return ni->ni_rssi;
    504   1.9   dyoung }
    505   1.9   dyoung 
    506   1.1   dyoung static void
    507   1.1   dyoung ieee80211_setup_node(struct ieee80211com *ic,
    508   1.1   dyoung 	struct ieee80211_node *ni, u_int8_t *macaddr)
    509   1.1   dyoung {
    510   1.1   dyoung 	int hash;
    511   1.1   dyoung 
    512  1.23  mycroft 	IEEE80211_DPRINTF(ic, IEEE80211_MSG_NODE,
    513  1.23  mycroft 		("%s %s\n", __func__, ether_sprintf(macaddr)));
    514   1.1   dyoung 	IEEE80211_ADDR_COPY(ni->ni_macaddr, macaddr);
    515   1.1   dyoung 	hash = IEEE80211_NODE_HASH(macaddr);
    516  1.33   dyoung 	ieee80211_node_newstate(ni, IEEE80211_STA_CACHE);
    517  1.23  mycroft 
    518  1.23  mycroft 	IEEE80211_NODE_LOCK_BH(ic);
    519   1.1   dyoung 	/*
    520   1.1   dyoung 	 * Note we don't enable the inactive timer when acting
    521   1.1   dyoung 	 * as a station.  Nodes created in this mode represent
    522   1.1   dyoung 	 * AP's identified while scanning.  If we time them out
    523   1.1   dyoung 	 * then several things happen: we can't return the data
    524   1.1   dyoung 	 * to users to show the list of AP's we encountered, and
    525   1.1   dyoung 	 * more importantly, we'll incorrectly deauthenticate
    526   1.1   dyoung 	 * ourself because the inactivity timer will kick us off.
    527   1.1   dyoung 	 */
    528  1.31  mycroft 	if (ic->ic_opmode != IEEE80211_M_STA &&
    529  1.31  mycroft 	    TAILQ_EMPTY(&ic->ic_node))
    530   1.1   dyoung 		ic->ic_inact_timer = IEEE80211_INACT_WAIT;
    531  1.32  mycroft 	TAILQ_INSERT_TAIL(&ic->ic_node, ni, ni_list);
    532  1.32  mycroft 	LIST_INSERT_HEAD(&ic->ic_hash[hash], ni, ni_hash);
    533  1.23  mycroft 	IEEE80211_NODE_UNLOCK_BH(ic);
    534   1.1   dyoung }
    535   1.1   dyoung 
    536   1.1   dyoung struct ieee80211_node *
    537   1.1   dyoung ieee80211_alloc_node(struct ieee80211com *ic, u_int8_t *macaddr)
    538   1.1   dyoung {
    539  1.33   dyoung 	struct ieee80211_node *ni = ieee80211_alloc_node_helper(ic);
    540  1.33   dyoung 	if (ni != NULL) {
    541   1.1   dyoung 		ieee80211_setup_node(ic, ni, macaddr);
    542  1.33   dyoung 	} else
    543  1.11   dyoung 		ic->ic_stats.is_rx_nodealloc++;
    544   1.1   dyoung 	return ni;
    545   1.1   dyoung }
    546   1.1   dyoung 
    547   1.1   dyoung struct ieee80211_node *
    548   1.1   dyoung ieee80211_dup_bss(struct ieee80211com *ic, u_int8_t *macaddr)
    549   1.1   dyoung {
    550  1.33   dyoung 	struct ieee80211_node *ni = ieee80211_alloc_node_helper(ic);
    551   1.1   dyoung 	if (ni != NULL) {
    552   1.1   dyoung 		ieee80211_setup_node(ic, ni, macaddr);
    553  1.11   dyoung 		/*
    554  1.11   dyoung 		 * Inherit from ic_bss.
    555  1.11   dyoung 		 */
    556  1.11   dyoung 		IEEE80211_ADDR_COPY(ni->ni_bssid, ic->ic_bss->ni_bssid);
    557  1.11   dyoung 		ni->ni_chan = ic->ic_bss->ni_chan;
    558  1.11   dyoung 	} else
    559  1.11   dyoung 		ic->ic_stats.is_rx_nodealloc++;
    560   1.1   dyoung 	return ni;
    561   1.1   dyoung }
    562   1.1   dyoung 
    563  1.11   dyoung static struct ieee80211_node *
    564  1.11   dyoung _ieee80211_find_node(struct ieee80211com *ic, u_int8_t *macaddr)
    565   1.1   dyoung {
    566   1.1   dyoung 	struct ieee80211_node *ni;
    567   1.1   dyoung 	int hash;
    568  1.11   dyoung 
    569  1.11   dyoung 	IEEE80211_NODE_LOCK_ASSERT(ic);
    570   1.1   dyoung 
    571   1.1   dyoung 	hash = IEEE80211_NODE_HASH(macaddr);
    572   1.1   dyoung 	LIST_FOREACH(ni, &ic->ic_hash[hash], ni_hash) {
    573   1.1   dyoung 		if (IEEE80211_ADDR_EQ(ni->ni_macaddr, macaddr)) {
    574  1.33   dyoung 			/* least-recently used is at tail */
    575  1.33   dyoung 			TAILQ_REMOVE(&ic->ic_node, ni, ni_list);
    576  1.33   dyoung 			TAILQ_INSERT_TAIL(&ic->ic_node, ni, ni_list);
    577  1.11   dyoung 			return ni;
    578   1.1   dyoung 		}
    579   1.1   dyoung 	}
    580  1.11   dyoung 	return NULL;
    581  1.11   dyoung }
    582  1.11   dyoung 
    583  1.11   dyoung struct ieee80211_node *
    584  1.11   dyoung ieee80211_find_node(struct ieee80211com *ic, u_int8_t *macaddr)
    585  1.11   dyoung {
    586  1.11   dyoung 	struct ieee80211_node *ni;
    587  1.11   dyoung 
    588  1.23  mycroft 	IEEE80211_NODE_LOCK(ic);
    589  1.11   dyoung 	ni = _ieee80211_find_node(ic, macaddr);
    590  1.23  mycroft 	IEEE80211_NODE_UNLOCK(ic);
    591   1.7   dyoung 	return ni;
    592   1.7   dyoung }
    593   1.7   dyoung 
    594  1.11   dyoung /*
    595  1.11   dyoung  * Return a reference to the appropriate node for sending
    596  1.11   dyoung  * a data frame.  This handles node discovery in adhoc networks.
    597  1.33   dyoung  *
    598  1.33   dyoung  * Drivers will call this, so increase the reference count before
    599  1.33   dyoung  * returning the node.
    600  1.11   dyoung  */
    601   1.7   dyoung struct ieee80211_node *
    602   1.7   dyoung ieee80211_find_txnode(struct ieee80211com *ic, u_int8_t *macaddr)
    603   1.7   dyoung {
    604   1.7   dyoung 	struct ieee80211_node *ni;
    605   1.7   dyoung 
    606   1.7   dyoung 	/*
    607   1.7   dyoung 	 * The destination address should be in the node table
    608  1.11   dyoung 	 * unless we are operating in station mode or this is a
    609  1.11   dyoung 	 * multicast/broadcast frame.
    610   1.7   dyoung 	 */
    611  1.11   dyoung 	if (ic->ic_opmode == IEEE80211_M_STA || IEEE80211_IS_MULTICAST(macaddr))
    612  1.33   dyoung 		return ieee80211_ref_node(ic->ic_bss);
    613   1.8   dyoung 
    614  1.11   dyoung 	/* XXX can't hold lock across dup_bss 'cuz of recursive locking */
    615  1.23  mycroft 	IEEE80211_NODE_LOCK(ic);
    616  1.11   dyoung 	ni = _ieee80211_find_node(ic, macaddr);
    617  1.23  mycroft 	IEEE80211_NODE_UNLOCK(ic);
    618  1.35   dyoung 	if (ni == NULL) {
    619  1.35   dyoung 		if (ic->ic_opmode != IEEE80211_M_IBSS &&
    620  1.35   dyoung 		    ic->ic_opmode != IEEE80211_M_AHDEMO)
    621  1.35   dyoung 			return NULL;
    622  1.11   dyoung 		/*
    623  1.11   dyoung 		 * Fake up a node; this handles node discovery in
    624  1.11   dyoung 		 * adhoc mode.  Note that for the driver's benefit
    625  1.11   dyoung 		 * we we treat this like an association so the driver
    626  1.11   dyoung 		 * has an opportunity to setup it's private state.
    627  1.11   dyoung 		 *
    628  1.11   dyoung 		 * XXX need better way to handle this; issue probe
    629  1.11   dyoung 		 *     request so we can deduce rate set, etc.
    630  1.11   dyoung 		 */
    631  1.35   dyoung 		if ((ni = ieee80211_dup_bss(ic, macaddr)) == NULL)
    632  1.35   dyoung 			return NULL;
    633  1.35   dyoung 		/* XXX no rate negotiation; just dup */
    634  1.35   dyoung 		ni->ni_rates = ic->ic_bss->ni_rates;
    635  1.35   dyoung 		if (ic->ic_newassoc)
    636  1.35   dyoung 			(*ic->ic_newassoc)(ic, ni, 1);
    637   1.7   dyoung 	}
    638  1.33   dyoung 	return ieee80211_ref_node(ni);
    639   1.7   dyoung }
    640   1.7   dyoung 
    641   1.7   dyoung /*
    642  1.29   dyoung  * It is usually desirable to process a Rx packet using its sender's
    643  1.29   dyoung  * node-record instead of the BSS record.
    644   1.7   dyoung  *
    645  1.17   dyoung  *  - AP mode: keep a node-record for every authenticated/associated
    646  1.17   dyoung  *    station *in the BSS*. For future use, we also track neighboring
    647  1.29   dyoung  *    APs, since they might belong to the same ESS.  APs in the same
    648  1.29   dyoung  *    ESS may bridge packets to each other, forming a Wireless
    649  1.29   dyoung  *    Distribution System (WDS).
    650   1.7   dyoung  *
    651  1.17   dyoung  * - IBSS mode: keep a node-record for every station *in the BSS*.
    652  1.29   dyoung  *   Also track neighboring stations by their beacons/probe responses.
    653   1.7   dyoung  *
    654  1.17   dyoung  * - monitor mode: keep a node-record for every sender, regardless
    655  1.17   dyoung  *   of BSS.
    656   1.7   dyoung  *
    657   1.7   dyoung  * - STA mode: the only available node-record is the BSS record,
    658   1.7   dyoung  *   ic->ic_bss.
    659   1.7   dyoung  *
    660   1.7   dyoung  * Of all the 802.11 Control packets, only the node-records for
    661   1.7   dyoung  * RTS packets node-record can be looked up.
    662   1.7   dyoung  *
    663   1.7   dyoung  * Return non-zero if the packet's node-record is kept, zero
    664   1.7   dyoung  * otherwise.
    665   1.7   dyoung  */
    666   1.7   dyoung static __inline int
    667   1.7   dyoung ieee80211_needs_rxnode(struct ieee80211com *ic, struct ieee80211_frame *wh,
    668   1.7   dyoung     u_int8_t **bssid)
    669   1.7   dyoung {
    670   1.7   dyoung 	struct ieee80211_node *bss = ic->ic_bss;
    671  1.19   dyoung 	int monitor, rc = 0;
    672   1.7   dyoung 
    673  1.19   dyoung 	monitor = (ic->ic_opmode == IEEE80211_M_MONITOR);
    674   1.7   dyoung 
    675   1.7   dyoung 	*bssid = NULL;
    676   1.7   dyoung 
    677   1.7   dyoung 	switch (wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) {
    678   1.7   dyoung 	case IEEE80211_FC0_TYPE_CTL:
    679  1.19   dyoung 		if (!monitor)
    680  1.19   dyoung 			break;
    681   1.7   dyoung 		return (wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) ==
    682   1.7   dyoung 		    IEEE80211_FC0_SUBTYPE_RTS;
    683   1.7   dyoung 	case IEEE80211_FC0_TYPE_MGT:
    684   1.7   dyoung 		*bssid = wh->i_addr3;
    685  1.29   dyoung 		switch (wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) {
    686  1.29   dyoung 		case IEEE80211_FC0_SUBTYPE_BEACON:
    687  1.29   dyoung 		case IEEE80211_FC0_SUBTYPE_PROBE_RESP:
    688  1.29   dyoung 			rc = 1;
    689  1.29   dyoung 			break;
    690  1.29   dyoung 		default:
    691  1.33   dyoung 			if (ic->ic_opmode == IEEE80211_M_STA)
    692  1.33   dyoung 				break;
    693  1.33   dyoung 			rc = IEEE80211_ADDR_EQ(*bssid, bss->ni_bssid) ||
    694  1.33   dyoung 			     IEEE80211_ADDR_EQ(*bssid, etherbroadcastaddr);
    695  1.29   dyoung 			break;
    696  1.29   dyoung 		}
    697   1.7   dyoung 		break;
    698   1.7   dyoung 	case IEEE80211_FC0_TYPE_DATA:
    699   1.7   dyoung 		switch (wh->i_fc[1] & IEEE80211_FC1_DIR_MASK) {
    700   1.7   dyoung 		case IEEE80211_FC1_DIR_NODS:
    701   1.7   dyoung 			*bssid = wh->i_addr3;
    702   1.7   dyoung 			if (ic->ic_opmode == IEEE80211_M_IBSS ||
    703   1.7   dyoung 			    ic->ic_opmode == IEEE80211_M_AHDEMO)
    704   1.7   dyoung 				rc = IEEE80211_ADDR_EQ(*bssid, bss->ni_bssid);
    705   1.7   dyoung 			break;
    706   1.7   dyoung 		case IEEE80211_FC1_DIR_TODS:
    707   1.7   dyoung 			*bssid = wh->i_addr1;
    708   1.7   dyoung 			if (ic->ic_opmode == IEEE80211_M_HOSTAP)
    709   1.7   dyoung 				rc = IEEE80211_ADDR_EQ(*bssid, bss->ni_bssid);
    710   1.7   dyoung 			break;
    711   1.7   dyoung 		case IEEE80211_FC1_DIR_FROMDS:
    712   1.7   dyoung 		case IEEE80211_FC1_DIR_DSTODS:
    713   1.7   dyoung 			*bssid = wh->i_addr2;
    714   1.7   dyoung 			rc = (ic->ic_opmode == IEEE80211_M_HOSTAP);
    715   1.7   dyoung 			break;
    716   1.7   dyoung 		}
    717   1.7   dyoung 		break;
    718   1.7   dyoung 	}
    719  1.19   dyoung 	return monitor || rc;
    720   1.7   dyoung }
    721   1.7   dyoung 
    722  1.33   dyoung /* Drivers call this, so increase the reference count before returning
    723  1.33   dyoung  * the node.
    724  1.33   dyoung  */
    725   1.7   dyoung struct ieee80211_node *
    726   1.7   dyoung ieee80211_find_rxnode(struct ieee80211com *ic, struct ieee80211_frame *wh)
    727   1.7   dyoung {
    728   1.7   dyoung 	struct ieee80211_node *ni;
    729   1.7   dyoung 	const static u_int8_t zero[IEEE80211_ADDR_LEN];
    730   1.7   dyoung 	u_int8_t *bssid;
    731   1.7   dyoung 
    732   1.7   dyoung 	if (!ieee80211_needs_rxnode(ic, wh, &bssid))
    733   1.7   dyoung 	        return ieee80211_ref_node(ic->ic_bss);
    734   1.7   dyoung 
    735  1.23  mycroft 	IEEE80211_NODE_LOCK(ic);
    736  1.11   dyoung 	ni = _ieee80211_find_node(ic, wh->i_addr2);
    737  1.23  mycroft 	IEEE80211_NODE_UNLOCK(ic);
    738   1.7   dyoung 
    739  1.15   dyoung 	if (ni != NULL)
    740  1.33   dyoung 		return ieee80211_ref_node(ni);
    741  1.15   dyoung 
    742  1.15   dyoung 	if (ic->ic_opmode == IEEE80211_M_HOSTAP)
    743  1.15   dyoung 		return ieee80211_ref_node(ic->ic_bss);
    744  1.15   dyoung 
    745  1.15   dyoung 	/* XXX see remarks in ieee80211_find_txnode */
    746  1.15   dyoung 	/* XXX no rate negotiation; just dup */
    747  1.15   dyoung 	if ((ni = ieee80211_dup_bss(ic, wh->i_addr2)) == NULL)
    748  1.15   dyoung 		return ieee80211_ref_node(ic->ic_bss);
    749  1.15   dyoung 
    750  1.15   dyoung 	IEEE80211_ADDR_COPY(ni->ni_bssid, (bssid != NULL) ? bssid : zero);
    751  1.15   dyoung 
    752  1.15   dyoung 	ni->ni_rates = ic->ic_bss->ni_rates;
    753  1.15   dyoung 	if (ic->ic_newassoc)
    754  1.15   dyoung 		(*ic->ic_newassoc)(ic, ni, 1);
    755  1.15   dyoung 
    756  1.18  mycroft 	IEEE80211_DPRINTF(ic, IEEE80211_MSG_NODE,
    757  1.18  mycroft 		("%s: faked-up node %p for %s\n", __func__, ni,
    758  1.18  mycroft 		ether_sprintf(wh->i_addr2)));
    759  1.15   dyoung 
    760  1.15   dyoung 	return ieee80211_ref_node(ni);
    761   1.1   dyoung }
    762   1.1   dyoung 
    763   1.1   dyoung /*
    764   1.1   dyoung  * Like find but search based on the channel too.
    765   1.1   dyoung  */
    766   1.1   dyoung struct ieee80211_node *
    767  1.30  mycroft ieee80211_find_node_for_beacon(struct ieee80211com *ic, u_int8_t *macaddr,
    768  1.30  mycroft 	struct ieee80211_channel *chan, char *ssid)
    769   1.1   dyoung {
    770  1.33   dyoung 	struct ieee80211_node *ni, *best;
    771   1.1   dyoung 	int hash;
    772  1.33   dyoung 	int best_score, score;
    773  1.33   dyoung 
    774  1.33   dyoung 	best = NULL;
    775  1.33   dyoung 	best_score = -1;
    776   1.1   dyoung 
    777   1.1   dyoung 	hash = IEEE80211_NODE_HASH(macaddr);
    778  1.23  mycroft 	IEEE80211_NODE_LOCK(ic);
    779   1.1   dyoung 	LIST_FOREACH(ni, &ic->ic_hash[hash], ni_hash) {
    780  1.33   dyoung 		if (!IEEE80211_ADDR_EQ(ni->ni_macaddr, macaddr))
    781  1.33   dyoung 			continue;
    782  1.33   dyoung 
    783  1.33   dyoung 		score = (ni->ni_chan == chan) ? 1 : 0;
    784  1.33   dyoung 
    785  1.33   dyoung 		if (ssid[1] == 0 || ni->ni_esslen == 0)
    786  1.33   dyoung 			score++;
    787  1.33   dyoung 		else if (ssid[1] != ni->ni_esslen ||
    788  1.33   dyoung 		     memcmp(ssid + 2, ni->ni_essid, ssid[1]) != 0)
    789  1.33   dyoung 			continue;
    790  1.33   dyoung 
    791  1.33   dyoung 		if (score > best_score) {
    792  1.33   dyoung 			if (best != NULL)
    793  1.33   dyoung 				(void)ieee80211_node_decref(best);
    794  1.33   dyoung 			best = ieee80211_ref_node(ni);
    795  1.33   dyoung 			best_score = score;
    796   1.1   dyoung 		}
    797   1.1   dyoung 	}
    798  1.23  mycroft 	IEEE80211_NODE_UNLOCK(ic);
    799  1.33   dyoung 	return best;
    800   1.1   dyoung }
    801   1.1   dyoung 
    802   1.1   dyoung static void
    803  1.33   dyoung ieee80211_free_node(struct ieee80211com *ic, struct ieee80211_node *ni)
    804   1.1   dyoung {
    805  1.10   dyoung 	IASSERT(ni != ic->ic_bss, ("freeing bss node"));
    806   1.1   dyoung 
    807  1.22  mycroft 	IEEE80211_DPRINTF(ic, IEEE80211_MSG_NODE,
    808  1.22  mycroft 		("%s %s\n", __func__, ether_sprintf(ni->ni_macaddr)));
    809   1.5   dyoung 	IEEE80211_AID_CLR(ni->ni_associd, ic->ic_aid_bitmap);
    810   1.1   dyoung 	TAILQ_REMOVE(&ic->ic_node, ni, ni_list);
    811   1.1   dyoung 	LIST_REMOVE(ni, ni_hash);
    812  1.33   dyoung 	ic->ic_nnodes--;
    813   1.5   dyoung 	if (!IF_IS_EMPTY(&ni->ni_savedq)) {
    814   1.5   dyoung 		IF_PURGE(&ni->ni_savedq);
    815   1.5   dyoung 		if (ic->ic_set_tim)
    816  1.22  mycroft 			(*ic->ic_set_tim)(ic, ni->ni_associd, 0);
    817   1.5   dyoung 	}
    818   1.1   dyoung 	if (TAILQ_EMPTY(&ic->ic_node))
    819   1.1   dyoung 		ic->ic_inact_timer = 0;
    820   1.1   dyoung 	(*ic->ic_node_free)(ic, ni);
    821  1.33   dyoung 	/* TBD indicate to drivers that a new node can be allocated */
    822   1.1   dyoung }
    823   1.1   dyoung 
    824   1.1   dyoung void
    825  1.33   dyoung ieee80211_release_node(struct ieee80211com *ic, struct ieee80211_node *ni)
    826   1.1   dyoung {
    827  1.23  mycroft 	IEEE80211_DPRINTF(ic, IEEE80211_MSG_NODE,
    828  1.23  mycroft 		("%s %s refcnt %d\n", __func__,
    829  1.24   dyoung 		 ether_sprintf(ni->ni_macaddr), ni->ni_refcnt));
    830  1.33   dyoung 	if (ieee80211_node_decref(ni) == 0 &&
    831  1.33   dyoung 	    ni->ni_state == IEEE80211_STA_COLLECT) {
    832  1.23  mycroft 		IEEE80211_NODE_LOCK_BH(ic);
    833  1.33   dyoung 		ieee80211_free_node(ic, ni);
    834  1.23  mycroft 		IEEE80211_NODE_UNLOCK_BH(ic);
    835   1.1   dyoung 	}
    836   1.1   dyoung }
    837   1.1   dyoung 
    838   1.1   dyoung void
    839   1.1   dyoung ieee80211_free_allnodes(struct ieee80211com *ic)
    840   1.1   dyoung {
    841   1.1   dyoung 	struct ieee80211_node *ni;
    842   1.1   dyoung 
    843  1.22  mycroft 	IEEE80211_DPRINTF(ic, IEEE80211_MSG_NODE, ("free all nodes\n"));
    844  1.23  mycroft 	IEEE80211_NODE_LOCK_BH(ic);
    845   1.1   dyoung 	while ((ni = TAILQ_FIRST(&ic->ic_node)) != NULL)
    846  1.33   dyoung 		ieee80211_free_node(ic, ni);
    847  1.23  mycroft 	IEEE80211_NODE_UNLOCK_BH(ic);
    848  1.22  mycroft 
    849  1.22  mycroft 	if (ic->ic_bss != NULL)
    850  1.22  mycroft 		node_cleanup(ic, ic->ic_bss);	/* for station mode */
    851   1.1   dyoung }
    852   1.1   dyoung 
    853   1.9   dyoung /*
    854   1.9   dyoung  * Timeout inactive nodes.  Note that we cannot hold the node
    855   1.9   dyoung  * lock while sending a frame as this would lead to a LOR.
    856   1.9   dyoung  * Instead we use a generation number to mark nodes that we've
    857   1.9   dyoung  * scanned and drop the lock and restart a scan if we have to
    858   1.9   dyoung  * time out a node.  Since we are single-threaded by virtue of
    859   1.9   dyoung  * controlling the inactivity timer we can be sure this will
    860   1.9   dyoung  * process each node only once.
    861   1.9   dyoung  */
    862   1.1   dyoung void
    863  1.33   dyoung ieee80211_clean_nodes(struct ieee80211com *ic)
    864   1.1   dyoung {
    865   1.9   dyoung 	struct ieee80211_node *ni;
    866   1.9   dyoung 	u_int gen = ic->ic_scangen++;		/* NB: ok 'cuz single-threaded*/
    867   1.1   dyoung 
    868   1.9   dyoung restart:
    869  1.23  mycroft 	IEEE80211_NODE_LOCK(ic);
    870   1.9   dyoung 	TAILQ_FOREACH(ni, &ic->ic_node, ni_list) {
    871  1.33   dyoung 		if (ic->ic_nnodes <= ic->ic_max_nnodes)
    872  1.33   dyoung 			break;
    873   1.9   dyoung 		if (ni->ni_scangen == gen)	/* previously handled */
    874   1.9   dyoung 			continue;
    875   1.9   dyoung 		ni->ni_scangen = gen;
    876  1.33   dyoung 		if (ni->ni_refcnt > 0)
    877  1.33   dyoung 			continue;
    878  1.33   dyoung 		IEEE80211_DPRINTF(ic, IEEE80211_MSG_NODE,
    879  1.33   dyoung 		    ("station %s purged from LRU cache\n",
    880  1.33   dyoung 		    ether_sprintf(ni->ni_macaddr)));
    881  1.33   dyoung 		/*
    882  1.33   dyoung 		 * Send a deauthenticate frame.
    883  1.33   dyoung 		 *
    884  1.33   dyoung 		 * Drop the node lock before sending the
    885  1.33   dyoung 		 * deauthentication frame in case the driver takes
    886  1.33   dyoung 		 * a lock, as this will result in a LOR between the
    887  1.33   dyoung 		 * node lock and the driver lock.
    888  1.33   dyoung 		 */
    889  1.33   dyoung 		IEEE80211_NODE_UNLOCK(ic);
    890  1.33   dyoung 		if (ic->ic_opmode == IEEE80211_M_HOSTAP) {
    891  1.33   dyoung 			IEEE80211_SEND_MGMT(ic, ni,
    892  1.33   dyoung 			    IEEE80211_FC0_SUBTYPE_DEAUTH,
    893  1.33   dyoung 			    IEEE80211_REASON_AUTH_EXPIRE);
    894  1.33   dyoung 			ieee80211_node_leave(ic, ni);
    895  1.33   dyoung 		} else
    896  1.33   dyoung 			ieee80211_free_node(ic, ni);
    897  1.33   dyoung 		ic->ic_stats.is_node_timeout++;
    898  1.33   dyoung 		goto restart;
    899   1.1   dyoung 	}
    900  1.23  mycroft 	IEEE80211_NODE_UNLOCK(ic);
    901   1.1   dyoung }
    902   1.1   dyoung 
    903   1.1   dyoung void
    904   1.1   dyoung ieee80211_iterate_nodes(struct ieee80211com *ic, ieee80211_iter_func *f, void *arg)
    905   1.1   dyoung {
    906   1.1   dyoung 	struct ieee80211_node *ni;
    907   1.1   dyoung 
    908  1.23  mycroft 	IEEE80211_NODE_LOCK(ic);
    909   1.1   dyoung 	TAILQ_FOREACH(ni, &ic->ic_node, ni_list)
    910   1.1   dyoung 		(*f)(arg, ni);
    911  1.23  mycroft 	IEEE80211_NODE_UNLOCK(ic);
    912   1.1   dyoung }
    913  1.22  mycroft 
    914  1.22  mycroft void
    915  1.22  mycroft ieee80211_node_join(struct ieee80211com *ic, struct ieee80211_node *ni, int resp)
    916  1.22  mycroft {
    917  1.22  mycroft 	int newassoc;
    918  1.22  mycroft 
    919  1.22  mycroft 	if (ni->ni_associd == 0) {
    920  1.22  mycroft 		u_int16_t aid;
    921  1.22  mycroft 
    922  1.22  mycroft 		/*
    923  1.22  mycroft 		 * It would be clever to search the bitmap
    924  1.22  mycroft 		 * more efficiently, but this will do for now.
    925  1.22  mycroft 		 */
    926  1.22  mycroft 		for (aid = 1; aid < ic->ic_max_aid; aid++) {
    927  1.22  mycroft 			if (!IEEE80211_AID_ISSET(aid,
    928  1.22  mycroft 			    ic->ic_aid_bitmap))
    929  1.22  mycroft 				break;
    930  1.22  mycroft 		}
    931  1.22  mycroft 		if (aid >= ic->ic_max_aid) {
    932  1.22  mycroft 			IEEE80211_SEND_MGMT(ic, ni, resp,
    933  1.22  mycroft 			    IEEE80211_REASON_ASSOC_TOOMANY);
    934  1.22  mycroft 			ieee80211_node_leave(ic, ni);
    935  1.22  mycroft 			return;
    936  1.22  mycroft 		}
    937  1.22  mycroft 		ni->ni_associd = aid | 0xc000;
    938  1.22  mycroft 		IEEE80211_AID_SET(ni->ni_associd, ic->ic_aid_bitmap);
    939  1.22  mycroft 		newassoc = 1;
    940  1.22  mycroft 		/* XXX for 11g must turn off short slot time if long
    941  1.22  mycroft 		   slot time sta associates */
    942  1.22  mycroft 	} else
    943  1.22  mycroft 		newassoc = 0;
    944  1.22  mycroft 
    945  1.22  mycroft 	IEEE80211_DPRINTF(ic, IEEE80211_MSG_ASSOC | IEEE80211_MSG_DEBUG,
    946  1.22  mycroft 		("station %s %s associated at aid %d\n",
    947  1.22  mycroft 		ether_sprintf(ni->ni_macaddr),
    948  1.22  mycroft 		(newassoc ? "newly" : "already"),
    949  1.22  mycroft 		ni->ni_associd & ~0xc000));
    950  1.22  mycroft 
    951  1.22  mycroft 	/* give driver a chance to setup state like ni_txrate */
    952  1.22  mycroft 	if (ic->ic_newassoc)
    953  1.22  mycroft 		(*ic->ic_newassoc)(ic, ni, newassoc);
    954  1.22  mycroft 	IEEE80211_SEND_MGMT(ic, ni, resp, IEEE80211_STATUS_SUCCESS);
    955  1.33   dyoung 	ieee80211_node_newstate(ni, IEEE80211_STA_ASSOC);
    956  1.22  mycroft }
    957  1.22  mycroft 
    958  1.22  mycroft /*
    959  1.26   dyoung  * Handle bookkeeping for station deauthentication/disassociation
    960  1.26   dyoung  * when operating as an ap.
    961  1.22  mycroft  */
    962  1.22  mycroft void
    963  1.22  mycroft ieee80211_node_leave(struct ieee80211com *ic, struct ieee80211_node *ni)
    964  1.22  mycroft {
    965  1.26   dyoung 
    966  1.26   dyoung 	IASSERT(ic->ic_opmode == IEEE80211_M_HOSTAP,
    967  1.26   dyoung 		("not in ap mode, mode %u", ic->ic_opmode));
    968  1.22  mycroft 	/*
    969  1.22  mycroft 	 * If node wasn't previously associated all
    970  1.22  mycroft 	 * we need to do is reclaim the reference.
    971  1.22  mycroft 	 */
    972  1.22  mycroft 	if (ni->ni_associd == 0)
    973  1.33   dyoung 		return;
    974  1.22  mycroft 	IEEE80211_AID_CLR(ni->ni_associd, ic->ic_aid_bitmap);
    975  1.22  mycroft 	ni->ni_associd = 0;
    976  1.33   dyoung 	ieee80211_node_newstate(ni, IEEE80211_STA_COLLECT);
    977  1.22  mycroft }
    978