ieee80211_node.h revision 1.30.2.2 1 1.30.2.2 phil /* $NetBSD: ieee80211_node.h,v 1.30.2.2 2018/06/28 21:23:01 phil Exp $ */
2 1.30.2.2 phil
3 1.1 dyoung /*-
4 1.30.2.1 phil * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
5 1.30.2.1 phil *
6 1.1 dyoung * Copyright (c) 2001 Atsushi Onoe
7 1.30.2.1 phil * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
8 1.1 dyoung * All rights reserved.
9 1.1 dyoung *
10 1.1 dyoung * Redistribution and use in source and binary forms, with or without
11 1.1 dyoung * modification, are permitted provided that the following conditions
12 1.1 dyoung * are met:
13 1.1 dyoung * 1. Redistributions of source code must retain the above copyright
14 1.1 dyoung * notice, this list of conditions and the following disclaimer.
15 1.1 dyoung * 2. Redistributions in binary form must reproduce the above copyright
16 1.1 dyoung * notice, this list of conditions and the following disclaimer in the
17 1.1 dyoung * documentation and/or other materials provided with the distribution.
18 1.1 dyoung *
19 1.1 dyoung * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
20 1.1 dyoung * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
21 1.1 dyoung * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
22 1.1 dyoung * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
23 1.1 dyoung * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
24 1.1 dyoung * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
25 1.1 dyoung * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
26 1.1 dyoung * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
27 1.1 dyoung * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
28 1.1 dyoung * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
29 1.1 dyoung *
30 1.30.2.1 phil * $FreeBSD$
31 1.1 dyoung */
32 1.1 dyoung #ifndef _NET80211_IEEE80211_NODE_H_
33 1.1 dyoung #define _NET80211_IEEE80211_NODE_H_
34 1.1 dyoung
35 1.16 dyoung #include <net80211/ieee80211_ioctl.h> /* for ieee80211_nodestats */
36 1.30.2.1 phil #include <net80211/ieee80211_ht.h> /* for aggregation state */
37 1.16 dyoung
38 1.16 dyoung /*
39 1.30.2.1 phil * Each ieee80211com instance has a single timer that fires every
40 1.30.2.1 phil * IEEE80211_INACT_WAIT seconds to handle "inactivity processing".
41 1.30.2.1 phil * This is used to do node inactivity processing when operating
42 1.30.2.1 phil * as an AP, adhoc or mesh mode. For inactivity processing each node
43 1.30.2.1 phil * has a timeout set in its ni_inact field that is decremented
44 1.30.2.1 phil * on each timeout and the node is reclaimed when the counter goes
45 1.30.2.1 phil * to zero. We use different inactivity timeout values depending
46 1.30.2.1 phil * on whether the node is associated and authorized (either by
47 1.30.2.1 phil * 802.1x or open/shared key authentication) or associated but yet
48 1.30.2.1 phil * to be authorized. The latter timeout is shorter to more aggressively
49 1.16 dyoung * reclaim nodes that leave part way through the 802.1x exchange.
50 1.16 dyoung */
51 1.16 dyoung #define IEEE80211_INACT_WAIT 15 /* inactivity interval (secs) */
52 1.16 dyoung #define IEEE80211_INACT_INIT (30/IEEE80211_INACT_WAIT) /* initial */
53 1.16 dyoung #define IEEE80211_INACT_AUTH (180/IEEE80211_INACT_WAIT) /* associated but not authorized */
54 1.16 dyoung #define IEEE80211_INACT_RUN (300/IEEE80211_INACT_WAIT) /* authorized */
55 1.16 dyoung #define IEEE80211_INACT_PROBE (30/IEEE80211_INACT_WAIT) /* probe */
56 1.16 dyoung #define IEEE80211_INACT_SCAN (300/IEEE80211_INACT_WAIT) /* scanned */
57 1.16 dyoung
58 1.30.2.1 phil #define IEEE80211_TRANS_WAIT 2 /* mgt frame tx timer (secs) */
59 1.30.2.1 phil
60 1.30.2.1 phil /* threshold for aging overlapping non-ERP bss */
61 1.30.2.1 phil #define IEEE80211_NONERP_PRESENT_AGE msecs_to_ticks(60*1000)
62 1.1 dyoung
63 1.30.2.1 phil #define IEEE80211_NODE_HASHSIZE 32 /* NB: hash size must be pow2 */
64 1.1 dyoung /* simple hash is enough for variation of macaddr */
65 1.30.2.1 phil #define IEEE80211_NODE_HASH(ic, addr) \
66 1.30.2.1 phil (((const uint8_t *)(addr))[IEEE80211_ADDR_LEN - 1] % \
67 1.16 dyoung IEEE80211_NODE_HASHSIZE)
68 1.1 dyoung
69 1.16 dyoung struct ieee80211_node_table;
70 1.16 dyoung struct ieee80211com;
71 1.30.2.1 phil struct ieee80211vap;
72 1.30.2.1 phil struct ieee80211_scanparams;
73 1.30.2.1 phil
74 1.30.2.1 phil /*
75 1.30.2.1 phil * Information element ``blob''. We use this structure
76 1.30.2.1 phil * to capture management frame payloads that need to be
77 1.30.2.1 phil * retained. Information elements within the payload that
78 1.30.2.1 phil * we need to consult have references recorded.
79 1.30.2.1 phil */
80 1.30.2.1 phil struct ieee80211_ies {
81 1.30.2.1 phil /* the following are either NULL or point within data */
82 1.30.2.1 phil uint8_t *wpa_ie; /* captured WPA ie */
83 1.30.2.1 phil uint8_t *rsn_ie; /* captured RSN ie */
84 1.30.2.1 phil uint8_t *wme_ie; /* captured WME ie */
85 1.30.2.1 phil uint8_t *ath_ie; /* captured Atheros ie */
86 1.30.2.1 phil uint8_t *htcap_ie; /* captured HTCAP ie */
87 1.30.2.1 phil uint8_t *htinfo_ie; /* captured HTINFO ie */
88 1.30.2.1 phil uint8_t *tdma_ie; /* captured TDMA ie */
89 1.30.2.1 phil uint8_t *meshid_ie; /* captured MESH ID ie */
90 1.30.2.1 phil uint8_t *vhtcap_ie; /* captured VHTCAP ie */
91 1.30.2.1 phil uint8_t *vhtopmode_ie; /* captured VHTOPMODE ie */
92 1.30.2.1 phil uint8_t *vhtpwrenv_ie; /* captured VHTPWRENV ie */
93 1.30.2.1 phil uint8_t *apchanrep_ie; /* captured APCHANREP ie */
94 1.30.2.1 phil uint8_t *bssload_ie; /* captured BSSLOAD ie */
95 1.30.2.1 phil uint8_t *spare[4];
96 1.30.2.1 phil /* NB: these must be the last members of this structure */
97 1.30.2.1 phil uint8_t *data; /* frame data > 802.11 header */
98 1.30.2.1 phil int len; /* data size in bytes */
99 1.30.2.1 phil };
100 1.30.2.1 phil
101 1.30.2.1 phil /*
102 1.30.2.1 phil * 802.11s (Mesh) Peer Link FSM state.
103 1.30.2.1 phil */
104 1.30.2.1 phil enum ieee80211_mesh_mlstate {
105 1.30.2.1 phil IEEE80211_NODE_MESH_IDLE = 0,
106 1.30.2.1 phil IEEE80211_NODE_MESH_OPENSNT = 1, /* open frame sent */
107 1.30.2.1 phil IEEE80211_NODE_MESH_OPENRCV = 2, /* open frame received */
108 1.30.2.1 phil IEEE80211_NODE_MESH_CONFIRMRCV = 3, /* confirm frame received */
109 1.30.2.1 phil IEEE80211_NODE_MESH_ESTABLISHED = 4, /* link established */
110 1.30.2.1 phil IEEE80211_NODE_MESH_HOLDING = 5, /* link closing */
111 1.30.2.1 phil };
112 1.30.2.1 phil #define IEEE80211_MESH_MLSTATE_BITS \
113 1.30.2.1 phil "\20\1IDLE\2OPENSNT\2OPENRCV\3CONFIRMRCV\4ESTABLISHED\5HOLDING"
114 1.14 dyoung
115 1.1 dyoung /*
116 1.1 dyoung * Node specific information. Note that drivers are expected
117 1.1 dyoung * to derive from this structure to add device-specific per-node
118 1.1 dyoung * state. This is done by overriding the ic_node_* methods in
119 1.1 dyoung * the ieee80211com structure.
120 1.1 dyoung */
121 1.1 dyoung struct ieee80211_node {
122 1.30.2.1 phil struct ieee80211vap *ni_vap; /* associated vap */
123 1.30.2.1 phil struct ieee80211com *ni_ic; /* copy from vap to save deref*/
124 1.30.2.1 phil struct ieee80211_node_table *ni_table; /* NB: may be NULL */
125 1.30.2.1 phil TAILQ_ENTRY(ieee80211_node) ni_list; /* list of all nodes */
126 1.30.2.1 phil LIST_ENTRY(ieee80211_node) ni_hash; /* hash collision list */
127 1.30.2.1 phil u_int ni_refcnt; /* count of held references */
128 1.30.2.1 phil u_int ni_flags;
129 1.30.2.1 phil #define IEEE80211_NODE_AUTH 0x000001 /* authorized for data */
130 1.30.2.1 phil #define IEEE80211_NODE_QOS 0x000002 /* QoS enabled */
131 1.30.2.1 phil #define IEEE80211_NODE_ERP 0x000004 /* ERP enabled */
132 1.16 dyoung /* NB: this must have the same value as IEEE80211_FC1_PWR_MGT */
133 1.30.2.1 phil #define IEEE80211_NODE_PWR_MGT 0x000010 /* power save mode enabled */
134 1.30.2.1 phil #define IEEE80211_NODE_AREF 0x000020 /* authentication ref held */
135 1.30.2.1 phil #define IEEE80211_NODE_HT 0x000040 /* HT enabled */
136 1.30.2.1 phil #define IEEE80211_NODE_HTCOMPAT 0x000080 /* HT setup w/ vendor OUI's */
137 1.30.2.1 phil #define IEEE80211_NODE_WPS 0x000100 /* WPS association */
138 1.30.2.1 phil #define IEEE80211_NODE_TSN 0x000200 /* TSN association */
139 1.30.2.1 phil #define IEEE80211_NODE_AMPDU_RX 0x000400 /* AMPDU rx enabled */
140 1.30.2.1 phil #define IEEE80211_NODE_AMPDU_TX 0x000800 /* AMPDU tx enabled */
141 1.30.2.1 phil #define IEEE80211_NODE_MIMO_PS 0x001000 /* MIMO power save enabled */
142 1.30.2.1 phil #define IEEE80211_NODE_MIMO_RTS 0x002000 /* send RTS in MIMO PS */
143 1.30.2.1 phil #define IEEE80211_NODE_RIFS 0x004000 /* RIFS enabled */
144 1.30.2.1 phil #define IEEE80211_NODE_SGI20 0x008000 /* Short GI in HT20 enabled */
145 1.30.2.1 phil #define IEEE80211_NODE_SGI40 0x010000 /* Short GI in HT40 enabled */
146 1.30.2.1 phil #define IEEE80211_NODE_ASSOCID 0x020000 /* xmit requires associd */
147 1.30.2.1 phil #define IEEE80211_NODE_AMSDU_RX 0x040000 /* AMSDU rx enabled */
148 1.30.2.1 phil #define IEEE80211_NODE_AMSDU_TX 0x080000 /* AMSDU tx enabled */
149 1.30.2.1 phil #define IEEE80211_NODE_VHT 0x100000 /* VHT enabled */
150 1.30.2.1 phil #define IEEE80211_NODE_LDPC 0x200000 /* LDPC enabled */
151 1.30.2.1 phil uint16_t ni_associd; /* association ID */
152 1.30.2.1 phil uint16_t ni_vlan; /* vlan tag */
153 1.30.2.1 phil uint16_t ni_txpower; /* current transmit power */
154 1.30.2.1 phil uint8_t ni_authmode; /* authentication algorithm */
155 1.30.2.1 phil uint8_t ni_ath_flags; /* Atheros feature flags */
156 1.30.2.1 phil /* NB: These must have the same values as IEEE80211_ATHC_* */
157 1.30.2.1 phil #define IEEE80211_NODE_TURBOP 0x0001 /* Turbo prime enable */
158 1.30.2.1 phil #define IEEE80211_NODE_COMP 0x0002 /* Compresssion enable */
159 1.30.2.1 phil #define IEEE80211_NODE_FF 0x0004 /* Fast Frame capable */
160 1.30.2.1 phil #define IEEE80211_NODE_XR 0x0008 /* Atheros WME enable */
161 1.30.2.1 phil #define IEEE80211_NODE_AR 0x0010 /* AR capable */
162 1.30.2.1 phil #define IEEE80211_NODE_BOOST 0x0080 /* Dynamic Turbo boosted */
163 1.30.2.1 phil uint16_t ni_ath_defkeyix;/* Atheros def key index */
164 1.30.2.1 phil const struct ieee80211_txparam *ni_txparms;
165 1.30.2.1 phil uint32_t ni_jointime; /* time of join (secs) */
166 1.30.2.1 phil uint32_t *ni_challenge; /* shared-key challenge */
167 1.30.2.1 phil struct ieee80211_ies ni_ies; /* captured ie's */
168 1.30.2.1 phil /* tx seq per-tid */
169 1.30.2.1 phil ieee80211_seq ni_txseqs[IEEE80211_TID_SIZE];
170 1.30.2.1 phil /* rx seq previous per-tid*/
171 1.30.2.1 phil ieee80211_seq ni_rxseqs[IEEE80211_TID_SIZE];
172 1.30.2.1 phil uint32_t ni_rxfragstamp; /* time stamp of last rx frag */
173 1.16 dyoung struct mbuf *ni_rxfrag[3]; /* rx frag reassembly */
174 1.16 dyoung struct ieee80211_key ni_ucastkey; /* unicast key */
175 1.1 dyoung
176 1.1 dyoung /* hardware */
177 1.30.2.1 phil uint32_t ni_avgrssi; /* recv ssi state */
178 1.30.2.1 phil int8_t ni_noise; /* noise floor */
179 1.30.2.1 phil
180 1.30.2.1 phil /* mimo statistics */
181 1.30.2.1 phil uint32_t ni_mimo_rssi_ctl[IEEE80211_MAX_CHAINS];
182 1.30.2.1 phil uint32_t ni_mimo_rssi_ext[IEEE80211_MAX_CHAINS];
183 1.30.2.1 phil uint8_t ni_mimo_noise_ctl[IEEE80211_MAX_CHAINS];
184 1.30.2.1 phil uint8_t ni_mimo_noise_ext[IEEE80211_MAX_CHAINS];
185 1.30.2.1 phil uint8_t ni_mimo_chains;
186 1.1 dyoung
187 1.1 dyoung /* header */
188 1.30.2.1 phil uint8_t ni_macaddr[IEEE80211_ADDR_LEN];
189 1.30.2.1 phil uint8_t ni_bssid[IEEE80211_ADDR_LEN];
190 1.1 dyoung
191 1.1 dyoung /* beacon, probe response */
192 1.15 dyoung union {
193 1.30.2.1 phil uint8_t data[8];
194 1.16 dyoung u_int64_t tsf;
195 1.16 dyoung } ni_tstamp; /* from last rcv'd beacon */
196 1.30.2.1 phil uint16_t ni_intval; /* beacon interval */
197 1.30.2.1 phil uint16_t ni_capinfo; /* capabilities */
198 1.30.2.1 phil uint8_t ni_esslen;
199 1.30.2.1 phil uint8_t ni_essid[IEEE80211_NWID_LEN];
200 1.1 dyoung struct ieee80211_rateset ni_rates; /* negotiated rate set */
201 1.30.2.1 phil struct ieee80211_channel *ni_chan;
202 1.30.2.1 phil uint16_t ni_fhdwell; /* FH only */
203 1.30.2.1 phil uint8_t ni_fhindex; /* FH only */
204 1.30.2.1 phil uint16_t ni_erp; /* ERP from beacon/probe resp */
205 1.30.2.1 phil uint16_t ni_timoff; /* byte offset to TIM ie */
206 1.30.2.1 phil uint8_t ni_dtim_period; /* DTIM period */
207 1.30.2.1 phil uint8_t ni_dtim_count; /* DTIM count for last bcn */
208 1.30.2.1 phil
209 1.30.2.1 phil /* 11s state */
210 1.30.2.1 phil uint8_t ni_meshidlen;
211 1.30.2.1 phil uint8_t ni_meshid[IEEE80211_MESHID_LEN];
212 1.30.2.1 phil enum ieee80211_mesh_mlstate ni_mlstate; /* peering management state */
213 1.30.2.1 phil uint16_t ni_mllid; /* link local ID */
214 1.30.2.1 phil uint16_t ni_mlpid; /* link peer ID */
215 1.30.2.1 phil struct callout ni_mltimer; /* link mesh timer */
216 1.30.2.1 phil uint8_t ni_mlrcnt; /* link mesh retry counter */
217 1.30.2.1 phil uint8_t ni_mltval; /* link mesh timer value */
218 1.30.2.1 phil struct callout ni_mlhtimer; /* link mesh backoff timer */
219 1.30.2.1 phil uint8_t ni_mlhcnt; /* link mesh holding counter */
220 1.30.2.1 phil
221 1.30.2.1 phil /* 11n state */
222 1.30.2.1 phil uint16_t ni_htcap; /* HT capabilities */
223 1.30.2.1 phil uint8_t ni_htparam; /* HT params */
224 1.30.2.1 phil uint8_t ni_htctlchan; /* HT control channel */
225 1.30.2.1 phil uint8_t ni_ht2ndchan; /* HT 2nd channel */
226 1.30.2.1 phil uint8_t ni_htopmode; /* HT operating mode */
227 1.30.2.1 phil uint8_t ni_htstbc; /* HT */
228 1.30.2.1 phil uint8_t ni_chw; /* negotiated channel width */
229 1.30.2.1 phil struct ieee80211_htrateset ni_htrates; /* negotiated ht rate set */
230 1.30.2.1 phil struct ieee80211_tx_ampdu ni_tx_ampdu[WME_NUM_TID];
231 1.30.2.1 phil struct ieee80211_rx_ampdu ni_rx_ampdu[WME_NUM_TID];
232 1.30.2.1 phil
233 1.30.2.1 phil /* VHT state */
234 1.30.2.1 phil uint32_t ni_vhtcap;
235 1.30.2.1 phil uint16_t ni_vht_basicmcs;
236 1.30.2.1 phil uint16_t ni_vht_pad2;
237 1.30.2.1 phil struct ieee80211_vht_mcs_info ni_vht_mcsinfo;
238 1.30.2.1 phil uint8_t ni_vht_chan1; /* 20/40/80/160 - VHT chan1 */
239 1.30.2.1 phil uint8_t ni_vht_chan2; /* 80+80 - VHT chan2 */
240 1.30.2.1 phil uint8_t ni_vht_chanwidth; /* IEEE80211_VHT_CHANWIDTH_ */
241 1.30.2.1 phil uint8_t ni_vht_pad1;
242 1.30.2.1 phil uint32_t ni_vht_spare[8];
243 1.30.2.1 phil
244 1.30.2.1 phil /* fast-frames state */
245 1.30.2.1 phil struct mbuf * ni_tx_superg[WME_NUM_TID];
246 1.5 dyoung
247 1.1 dyoung /* others */
248 1.16 dyoung short ni_inact; /* inactivity mark count */
249 1.16 dyoung short ni_inact_reload;/* inactivity reload value */
250 1.30.2.1 phil int ni_txrate; /* legacy rate/MCS */
251 1.30.2.1 phil struct ieee80211_psq ni_psq; /* power save queue */
252 1.16 dyoung struct ieee80211_nodestats ni_stats; /* per-node statistics */
253 1.30.2.1 phil
254 1.30.2.1 phil struct ieee80211vap *ni_wdsvap; /* associated WDS vap */
255 1.30.2.1 phil void *ni_rctls; /* private ratectl state */
256 1.30.2.1 phil
257 1.30.2.1 phil /* quiet time IE state for the given node */
258 1.30.2.1 phil uint32_t ni_quiet_ie_set; /* Quiet time IE was seen */
259 1.30.2.1 phil struct ieee80211_quiet_ie ni_quiet_ie; /* last seen quiet IE */
260 1.30.2.1 phil
261 1.30.2.1 phil uint64_t ni_spare[3];
262 1.1 dyoung };
263 1.16 dyoung MALLOC_DECLARE(M_80211_NODE);
264 1.30.2.1 phil MALLOC_DECLARE(M_80211_NODE_IE);
265 1.30.2.1 phil
266 1.30.2.1 phil #define IEEE80211_NODE_ATH (IEEE80211_NODE_FF | IEEE80211_NODE_TURBOP)
267 1.30.2.1 phil #define IEEE80211_NODE_AMPDU \
268 1.30.2.1 phil (IEEE80211_NODE_AMPDU_RX | IEEE80211_NODE_AMPDU_TX)
269 1.30.2.1 phil #define IEEE80211_NODE_AMSDU \
270 1.30.2.1 phil (IEEE80211_NODE_AMSDU_RX | IEEE80211_NODE_AMSDU_TX)
271 1.30.2.1 phil #define IEEE80211_NODE_HT_ALL \
272 1.30.2.1 phil (IEEE80211_NODE_HT | IEEE80211_NODE_HTCOMPAT | \
273 1.30.2.1 phil IEEE80211_NODE_AMPDU | IEEE80211_NODE_AMSDU | \
274 1.30.2.1 phil IEEE80211_NODE_MIMO_PS | IEEE80211_NODE_MIMO_RTS | \
275 1.30.2.1 phil IEEE80211_NODE_RIFS | IEEE80211_NODE_SGI20 | IEEE80211_NODE_SGI40)
276 1.30.2.1 phil
277 1.30.2.1 phil #define IEEE80211_NODE_BITS \
278 1.30.2.1 phil "\20\1AUTH\2QOS\3ERP\5PWR_MGT\6AREF\7HT\10HTCOMPAT\11WPS\12TSN" \
279 1.30.2.1 phil "\13AMPDU_RX\14AMPDU_TX\15MIMO_PS\16MIMO_RTS\17RIFS\20SGI20\21SGI40" \
280 1.30.2.1 phil "\22ASSOCID"
281 1.1 dyoung
282 1.16 dyoung #define IEEE80211_NODE_AID(ni) IEEE80211_AID(ni->ni_associd)
283 1.4 dyoung
284 1.16 dyoung #define IEEE80211_NODE_STAT(ni,stat) (ni->ni_stats.ns_##stat++)
285 1.16 dyoung #define IEEE80211_NODE_STAT_ADD(ni,stat,v) (ni->ni_stats.ns_##stat += v)
286 1.16 dyoung #define IEEE80211_NODE_STAT_SET(ni,stat,v) (ni->ni_stats.ns_##stat = v)
287 1.4 dyoung
288 1.30.2.1 phil /*
289 1.30.2.1 phil * Filtered rssi calculation support. The receive rssi is maintained
290 1.30.2.1 phil * as an average over the last 10 frames received using a low pass filter
291 1.30.2.1 phil * (all frames for now, possibly need to be more selective). Calculations
292 1.30.2.1 phil * are designed such that a good compiler can optimize them. The avg
293 1.30.2.1 phil * rssi state should be initialized to IEEE80211_RSSI_DUMMY_MARKER and
294 1.30.2.1 phil * each sample incorporated with IEEE80211_RSSI_LPF. Use IEEE80211_RSSI_GET
295 1.30.2.1 phil * to extract the current value.
296 1.30.2.1 phil *
297 1.30.2.1 phil * Note that we assume rssi data are in the range [-127..127] and we
298 1.30.2.1 phil * discard values <-20. This is consistent with assumptions throughout
299 1.30.2.1 phil * net80211 that signal strength data are in .5 dBm units relative to
300 1.30.2.1 phil * the current noise floor (linear, not log).
301 1.30.2.1 phil */
302 1.30.2.1 phil #define IEEE80211_RSSI_LPF_LEN 10
303 1.30.2.1 phil #define IEEE80211_RSSI_DUMMY_MARKER 127
304 1.30.2.1 phil /* NB: pow2 to optimize out * and / */
305 1.30.2.1 phil #define IEEE80211_RSSI_EP_MULTIPLIER (1<<7)
306 1.30.2.1 phil #define IEEE80211_RSSI_IN(x) ((x) * IEEE80211_RSSI_EP_MULTIPLIER)
307 1.30.2.1 phil #define _IEEE80211_RSSI_LPF(x, y, len) \
308 1.30.2.1 phil (((x) != IEEE80211_RSSI_DUMMY_MARKER) ? (((x) * ((len) - 1) + (y)) / (len)) : (y))
309 1.30.2.1 phil #define IEEE80211_RSSI_LPF(x, y) do { \
310 1.30.2.1 phil if ((y) >= -20) { \
311 1.30.2.1 phil x = _IEEE80211_RSSI_LPF((x), IEEE80211_RSSI_IN((y)), \
312 1.30.2.1 phil IEEE80211_RSSI_LPF_LEN); \
313 1.30.2.1 phil } \
314 1.30.2.1 phil } while (0)
315 1.30.2.1 phil #define IEEE80211_RSSI_EP_RND(x, mul) \
316 1.30.2.1 phil ((((x) % (mul)) >= ((mul)/2)) ? ((x) + ((mul) - 1)) / (mul) : (x)/(mul))
317 1.30.2.1 phil #define IEEE80211_RSSI_GET(x) \
318 1.30.2.1 phil IEEE80211_RSSI_EP_RND(x, IEEE80211_RSSI_EP_MULTIPLIER)
319 1.30.2.1 phil
320 1.30.2.1 phil static __inline struct ieee80211_node *
321 1.30.2.1 phil ieee80211_ref_node(struct ieee80211_node *ni)
322 1.30.2.1 phil {
323 1.30.2.1 phil ieee80211_node_incref(ni);
324 1.30.2.1 phil return ni;
325 1.30.2.1 phil }
326 1.30.2.1 phil
327 1.30.2.1 phil static __inline void
328 1.30.2.1 phil ieee80211_unref_node(struct ieee80211_node **ni)
329 1.30.2.1 phil {
330 1.30.2.1 phil ieee80211_node_decref(*ni);
331 1.30.2.1 phil *ni = NULL; /* guard against use */
332 1.30.2.1 phil }
333 1.1 dyoung
334 1.16 dyoung void ieee80211_node_attach(struct ieee80211com *);
335 1.16 dyoung void ieee80211_node_lateattach(struct ieee80211com *);
336 1.16 dyoung void ieee80211_node_detach(struct ieee80211com *);
337 1.30.2.1 phil void ieee80211_node_vattach(struct ieee80211vap *);
338 1.30.2.1 phil void ieee80211_node_latevattach(struct ieee80211vap *);
339 1.30.2.1 phil void ieee80211_node_vdetach(struct ieee80211vap *);
340 1.16 dyoung
341 1.16 dyoung static __inline int
342 1.16 dyoung ieee80211_node_is_authorized(const struct ieee80211_node *ni)
343 1.16 dyoung {
344 1.16 dyoung return (ni->ni_flags & IEEE80211_NODE_AUTH);
345 1.16 dyoung }
346 1.16 dyoung
347 1.19 skrll void ieee80211_node_authorize(struct ieee80211_node *);
348 1.19 skrll void ieee80211_node_unauthorize(struct ieee80211_node *);
349 1.16 dyoung
350 1.30.2.1 phil void ieee80211_node_setuptxparms(struct ieee80211_node *);
351 1.30.2.1 phil void ieee80211_node_set_chan(struct ieee80211_node *,
352 1.30.2.1 phil struct ieee80211_channel *);
353 1.30.2.1 phil void ieee80211_create_ibss(struct ieee80211vap*, struct ieee80211_channel *);
354 1.30.2.1 phil void ieee80211_reset_bss(struct ieee80211vap *);
355 1.30.2.1 phil void ieee80211_sync_curchan(struct ieee80211com *);
356 1.30.2.1 phil void ieee80211_setupcurchan(struct ieee80211com *,
357 1.30.2.1 phil struct ieee80211_channel *);
358 1.30.2.1 phil void ieee80211_setcurchan(struct ieee80211com *, struct ieee80211_channel *);
359 1.30.2.1 phil void ieee80211_update_chw(struct ieee80211com *);
360 1.30.2.1 phil int ieee80211_ibss_merge_check(struct ieee80211_node *);
361 1.30.2.1 phil int ieee80211_ibss_node_check_new(struct ieee80211_node *ni,
362 1.30.2.1 phil const struct ieee80211_scanparams *);
363 1.19 skrll int ieee80211_ibss_merge(struct ieee80211_node *);
364 1.30.2.1 phil struct ieee80211_scan_entry;
365 1.30.2.1 phil int ieee80211_sta_join(struct ieee80211vap *, struct ieee80211_channel *,
366 1.30.2.1 phil const struct ieee80211_scan_entry *);
367 1.30.2.1 phil void ieee80211_sta_leave(struct ieee80211_node *);
368 1.30.2.1 phil void ieee80211_node_deauth(struct ieee80211_node *, int);
369 1.30.2.1 phil
370 1.30.2.1 phil int ieee80211_ies_init(struct ieee80211_ies *, const uint8_t *, int);
371 1.30.2.1 phil void ieee80211_ies_cleanup(struct ieee80211_ies *);
372 1.30.2.1 phil void ieee80211_ies_expand(struct ieee80211_ies *);
373 1.30.2.1 phil #define ieee80211_ies_setie(_ies, _ie, _off) do { \
374 1.30.2.1 phil (_ies)._ie = (_ies).data + (_off); \
375 1.30.2.1 phil } while (0)
376 1.16 dyoung
377 1.16 dyoung /*
378 1.16 dyoung * Table of ieee80211_node instances. Each ieee80211com
379 1.30.2.1 phil * has one that holds association stations (when operating
380 1.30.2.1 phil * as an ap) or neighbors (in ibss mode).
381 1.30.2.1 phil *
382 1.30.2.1 phil * XXX embed this in ieee80211com instead of indirect?
383 1.16 dyoung */
384 1.16 dyoung struct ieee80211_node_table {
385 1.16 dyoung struct ieee80211com *nt_ic; /* back reference */
386 1.16 dyoung ieee80211_node_lock_t nt_nodelock; /* on node table */
387 1.16 dyoung TAILQ_HEAD(, ieee80211_node) nt_node; /* information of all nodes */
388 1.16 dyoung LIST_HEAD(, ieee80211_node) nt_hash[IEEE80211_NODE_HASHSIZE];
389 1.30.2.1 phil int nt_count; /* number of nodes */
390 1.19 skrll struct ieee80211_node **nt_keyixmap; /* key ix -> node map */
391 1.19 skrll int nt_keyixmax; /* keyixmap size */
392 1.30.2.1 phil const char *nt_name; /* table name for debug msgs */
393 1.30.2.1 phil int nt_inact_init; /* initial node inact setting */
394 1.16 dyoung };
395 1.9 dyoung
396 1.30.2.1 phil struct ieee80211_node *ieee80211_alloc_node(struct ieee80211_node_table *,
397 1.30.2.1 phil struct ieee80211vap *,
398 1.30.2.1 phil const uint8_t macaddr[IEEE80211_ADDR_LEN]);
399 1.30.2.1 phil struct ieee80211_node *ieee80211_tmp_node(struct ieee80211vap *,
400 1.30.2.1 phil const uint8_t macaddr[IEEE80211_ADDR_LEN]);
401 1.30.2.1 phil struct ieee80211_node *ieee80211_dup_bss(struct ieee80211vap *,
402 1.30.2.1 phil const uint8_t macaddr[IEEE80211_ADDR_LEN]);
403 1.30.2.1 phil struct ieee80211_node *ieee80211_node_create_wds(struct ieee80211vap *,
404 1.30.2.1 phil const uint8_t bssid[IEEE80211_ADDR_LEN],
405 1.30.2.1 phil struct ieee80211_channel *);
406 1.16 dyoung #ifdef IEEE80211_DEBUG_REFCNT
407 1.16 dyoung void ieee80211_free_node_debug(struct ieee80211_node *,
408 1.16 dyoung const char *func, int line);
409 1.30.2.1 phil struct ieee80211_node *ieee80211_find_node_locked_debug(
410 1.30.2.1 phil struct ieee80211_node_table *,
411 1.30.2.1 phil const uint8_t macaddr[IEEE80211_ADDR_LEN],
412 1.30.2.1 phil const char *func, int line);
413 1.30.2.1 phil struct ieee80211_node *ieee80211_find_node_debug(struct ieee80211_node_table *,
414 1.30.2.1 phil const uint8_t macaddr[IEEE80211_ADDR_LEN],
415 1.30.2.1 phil const char *func, int line);
416 1.30.2.1 phil struct ieee80211_node *ieee80211_find_vap_node_locked_debug(
417 1.30.2.1 phil struct ieee80211_node_table *,
418 1.30.2.1 phil const struct ieee80211vap *vap,
419 1.30.2.1 phil const uint8_t macaddr[IEEE80211_ADDR_LEN],
420 1.16 dyoung const char *func, int line);
421 1.30.2.1 phil struct ieee80211_node *ieee80211_find_vap_node_debug(
422 1.30.2.1 phil struct ieee80211_node_table *,
423 1.30.2.1 phil const struct ieee80211vap *vap,
424 1.30.2.1 phil const uint8_t macaddr[IEEE80211_ADDR_LEN],
425 1.30.2.1 phil const char *func, int line);
426 1.30.2.1 phil struct ieee80211_node * ieee80211_find_rxnode_debug(struct ieee80211com *,
427 1.30.2.1 phil const struct ieee80211_frame_min *,
428 1.16 dyoung const char *func, int line);
429 1.19 skrll struct ieee80211_node * ieee80211_find_rxnode_withkey_debug(
430 1.19 skrll struct ieee80211com *,
431 1.30.2.1 phil const struct ieee80211_frame_min *, uint16_t keyix,
432 1.16 dyoung const char *func, int line);
433 1.30.2.1 phil struct ieee80211_node *ieee80211_find_txnode_debug(struct ieee80211vap *,
434 1.30.2.1 phil const uint8_t *,
435 1.16 dyoung const char *func, int line);
436 1.16 dyoung #define ieee80211_free_node(ni) \
437 1.16 dyoung ieee80211_free_node_debug(ni, __func__, __LINE__)
438 1.30.2.1 phil #define ieee80211_find_node_locked(nt, mac) \
439 1.30.2.1 phil ieee80211_find_node_locked_debug(nt, mac, __func__, __LINE__)
440 1.16 dyoung #define ieee80211_find_node(nt, mac) \
441 1.16 dyoung ieee80211_find_node_debug(nt, mac, __func__, __LINE__)
442 1.30.2.1 phil #define ieee80211_find_vap_node_locked(nt, vap, mac) \
443 1.30.2.1 phil ieee80211_find_vap_node_locked_debug(nt, vap, mac, __func__, __LINE__)
444 1.30.2.1 phil #define ieee80211_find_vap_node(nt, vap, mac) \
445 1.30.2.1 phil ieee80211_find_vap_node_debug(nt, vap, mac, __func__, __LINE__)
446 1.30.2.1 phil #define ieee80211_find_rxnode(ic, wh) \
447 1.30.2.1 phil ieee80211_find_rxnode_debug(ic, wh, __func__, __LINE__)
448 1.30.2.1 phil #define ieee80211_find_rxnode_withkey(ic, wh, keyix) \
449 1.30.2.1 phil ieee80211_find_rxnode_withkey_debug(ic, wh, keyix, __func__, __LINE__)
450 1.30.2.1 phil #define ieee80211_find_txnode(vap, mac) \
451 1.30.2.1 phil ieee80211_find_txnode_debug(vap, mac, __func__, __LINE__)
452 1.16 dyoung #else
453 1.16 dyoung void ieee80211_free_node(struct ieee80211_node *);
454 1.30.2.1 phil struct ieee80211_node *ieee80211_find_node_locked(struct ieee80211_node_table *,
455 1.30.2.1 phil const uint8_t macaddr[IEEE80211_ADDR_LEN]);
456 1.30.2.1 phil struct ieee80211_node *ieee80211_find_node(struct ieee80211_node_table *,
457 1.30.2.1 phil const uint8_t macaddr[IEEE80211_ADDR_LEN]);
458 1.30.2.1 phil struct ieee80211_node *ieee80211_find_vap_node_locked(
459 1.30.2.1 phil struct ieee80211_node_table *, const struct ieee80211vap *,
460 1.30.2.1 phil const uint8_t macaddr[IEEE80211_ADDR_LEN]);
461 1.30.2.1 phil struct ieee80211_node *ieee80211_find_vap_node(
462 1.30.2.1 phil struct ieee80211_node_table *, const struct ieee80211vap *,
463 1.30.2.1 phil const uint8_t macaddr[IEEE80211_ADDR_LEN]);
464 1.30.2.1 phil struct ieee80211_node * ieee80211_find_rxnode(struct ieee80211com *,
465 1.30.2.1 phil const struct ieee80211_frame_min *);
466 1.19 skrll struct ieee80211_node * ieee80211_find_rxnode_withkey(struct ieee80211com *,
467 1.30.2.1 phil const struct ieee80211_frame_min *, uint16_t keyix);
468 1.30.2.1 phil struct ieee80211_node *ieee80211_find_txnode(struct ieee80211vap *,
469 1.30.2.1 phil const uint8_t macaddr[IEEE80211_ADDR_LEN]);
470 1.16 dyoung #endif
471 1.19 skrll int ieee80211_node_delucastkey(struct ieee80211_node *);
472 1.30.2.1 phil void ieee80211_node_timeout(void *arg);
473 1.11 mycroft
474 1.1 dyoung typedef void ieee80211_iter_func(void *, struct ieee80211_node *);
475 1.30.2.1 phil int ieee80211_iterate_nodes_vap(struct ieee80211_node_table *,
476 1.30.2.1 phil struct ieee80211vap *, ieee80211_iter_func *, void *);
477 1.16 dyoung void ieee80211_iterate_nodes(struct ieee80211_node_table *,
478 1.1 dyoung ieee80211_iter_func *, void *);
479 1.1 dyoung
480 1.30.2.1 phil void ieee80211_notify_erp(struct ieee80211com *);
481 1.16 dyoung void ieee80211_dump_node(struct ieee80211_node_table *,
482 1.5 dyoung struct ieee80211_node *);
483 1.16 dyoung void ieee80211_dump_nodes(struct ieee80211_node_table *);
484 1.11 mycroft
485 1.30.2.1 phil struct ieee80211_node *ieee80211_fakeup_adhoc_node(struct ieee80211vap *,
486 1.30.2.1 phil const uint8_t macaddr[IEEE80211_ADDR_LEN]);
487 1.30.2.1 phil struct ieee80211_scanparams;
488 1.30.2.1 phil void ieee80211_init_neighbor(struct ieee80211_node *,
489 1.19 skrll const struct ieee80211_frame *,
490 1.30.2.1 phil const struct ieee80211_scanparams *);
491 1.30.2.1 phil struct ieee80211_node *ieee80211_add_neighbor(struct ieee80211vap *,
492 1.19 skrll const struct ieee80211_frame *,
493 1.19 skrll const struct ieee80211_scanparams *);
494 1.30.2.1 phil void ieee80211_node_join(struct ieee80211_node *,int);
495 1.30.2.1 phil void ieee80211_node_leave(struct ieee80211_node *);
496 1.30.2.1 phil int8_t ieee80211_getrssi(struct ieee80211vap *);
497 1.30.2.1 phil void ieee80211_getsignal(struct ieee80211vap *, int8_t *, int8_t *);
498 1.30.2.1 phil #endif /* _NET80211_IEEE80211_NODE_H_ */
499