ieee80211_var.h revision 1.1.1.5 1 1.1 dyoung /*-
2 1.1 dyoung * Copyright (c) 2001 Atsushi Onoe
3 1.1.1.4 dyoung * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
4 1.1 dyoung * All rights reserved.
5 1.1 dyoung *
6 1.1 dyoung * Redistribution and use in source and binary forms, with or without
7 1.1 dyoung * modification, are permitted provided that the following conditions
8 1.1 dyoung * are met:
9 1.1 dyoung * 1. Redistributions of source code must retain the above copyright
10 1.1 dyoung * notice, this list of conditions and the following disclaimer.
11 1.1 dyoung * 2. Redistributions in binary form must reproduce the above copyright
12 1.1 dyoung * notice, this list of conditions and the following disclaimer in the
13 1.1 dyoung * documentation and/or other materials provided with the distribution.
14 1.1 dyoung * 3. The name of the author may not be used to endorse or promote products
15 1.1 dyoung * derived from this software without specific prior written permission.
16 1.1 dyoung *
17 1.1 dyoung * Alternatively, this software may be distributed under the terms of the
18 1.1 dyoung * GNU General Public License ("GPL") version 2 as published by the Free
19 1.1 dyoung * Software Foundation.
20 1.1 dyoung *
21 1.1 dyoung * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
22 1.1 dyoung * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
23 1.1 dyoung * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
24 1.1 dyoung * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
25 1.1 dyoung * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
26 1.1 dyoung * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 1.1 dyoung * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 1.1 dyoung * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 1.1 dyoung * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
30 1.1 dyoung * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 1.1 dyoung *
32 1.1.1.5 dyoung * $FreeBSD: src/sys/net80211/ieee80211_var.h,v 1.22 2005/07/06 15:38:27 sam Exp $
33 1.1 dyoung */
34 1.1 dyoung #ifndef _NET80211_IEEE80211_VAR_H_
35 1.1 dyoung #define _NET80211_IEEE80211_VAR_H_
36 1.1 dyoung
37 1.1 dyoung /*
38 1.1 dyoung * Definitions for IEEE 802.11 drivers.
39 1.1 dyoung */
40 1.1.1.4 dyoung #define IEEE80211_DEBUG
41 1.1.1.4 dyoung #undef IEEE80211_DEBUG_REFCNT /* node refcnt stuff */
42 1.1 dyoung
43 1.1.1.4 dyoung /* NB: portability glue must go first */
44 1.1.1.4 dyoung #ifdef __NetBSD__
45 1.1.1.4 dyoung #include <net80211/ieee80211_netbsd.h>
46 1.1.1.4 dyoung #elif __FreeBSD__
47 1.1.1.4 dyoung #include <net80211/ieee80211_freebsd.h>
48 1.1.1.4 dyoung #elif __linux__
49 1.1.1.4 dyoung #include <net80211/ieee80211_linux.h>
50 1.1.1.4 dyoung #else
51 1.1.1.4 dyoung #error "No support for your operating system!"
52 1.1.1.4 dyoung #endif
53 1.1.1.4 dyoung
54 1.1.1.4 dyoung #include <net80211/_ieee80211.h>
55 1.1 dyoung #include <net80211/ieee80211.h>
56 1.1 dyoung #include <net80211/ieee80211_crypto.h>
57 1.1.1.2 dyoung #include <net80211/ieee80211_ioctl.h> /* for ieee80211_stats */
58 1.1 dyoung #include <net80211/ieee80211_node.h>
59 1.1 dyoung #include <net80211/ieee80211_proto.h>
60 1.1 dyoung
61 1.1.1.4 dyoung #define IEEE80211_TXPOWER_MAX 100 /* .5 dbM (XXX units?) */
62 1.1.1.4 dyoung #define IEEE80211_TXPOWER_MIN 0 /* kill radio */
63 1.1 dyoung
64 1.1.1.4 dyoung #define IEEE80211_DTIM_MAX 15 /* max DTIM period */
65 1.1.1.4 dyoung #define IEEE80211_DTIM_MIN 1 /* min DTIM period */
66 1.1.1.4 dyoung #define IEEE80211_DTIM_DEFAULT 1 /* default DTIM period */
67 1.1 dyoung
68 1.1.1.4 dyoung #define IEEE80211_BINTVAL_MAX 500 /* max beacon interval (TU's) */
69 1.1.1.4 dyoung #define IEEE80211_BINTVAL_MIN 25 /* min beacon interval (TU's) */
70 1.1.1.4 dyoung #define IEEE80211_BINTVAL_DEFAULT 100 /* default beacon interval (TU's) */
71 1.1 dyoung
72 1.1.1.4 dyoung #define IEEE80211_PS_SLEEP 0x1 /* STA is in power saving mode */
73 1.1.1.4 dyoung #define IEEE80211_PS_MAX_QUEUE 50 /* maximum saved packets */
74 1.1 dyoung
75 1.1.1.4 dyoung #define IEEE80211_MS_TO_TU(x) (((x) * 1000) / 1024)
76 1.1.1.4 dyoung #define IEEE80211_TU_TO_MS(x) (((x) * 1024) / 1000)
77 1.1 dyoung
78 1.1.1.4 dyoung struct ieee80211_aclator;
79 1.1.1.4 dyoung struct sysctl_ctx_list;
80 1.1 dyoung
81 1.1 dyoung struct ieee80211com {
82 1.1.1.4 dyoung SLIST_ENTRY(ieee80211com) ic_next;
83 1.1.1.4 dyoung struct ifnet *ic_ifp; /* associated device */
84 1.1.1.4 dyoung struct ieee80211_stats ic_stats; /* statistics */
85 1.1.1.4 dyoung struct sysctl_ctx_list *ic_sysctl; /* dynamic sysctl context */
86 1.1.1.4 dyoung u_int32_t ic_debug; /* debug msg flags */
87 1.1.1.4 dyoung int ic_vap; /* virtual AP index */
88 1.1.1.4 dyoung ieee80211_beacon_lock_t ic_beaconlock; /* beacon update lock */
89 1.1.1.4 dyoung
90 1.1.1.4 dyoung int (*ic_reset)(struct ifnet *);
91 1.1 dyoung void (*ic_recv_mgmt)(struct ieee80211com *,
92 1.1 dyoung struct mbuf *, struct ieee80211_node *,
93 1.1 dyoung int, int, u_int32_t);
94 1.1 dyoung int (*ic_send_mgmt)(struct ieee80211com *,
95 1.1 dyoung struct ieee80211_node *, int, int);
96 1.1 dyoung int (*ic_newstate)(struct ieee80211com *,
97 1.1 dyoung enum ieee80211_state, int);
98 1.1 dyoung void (*ic_newassoc)(struct ieee80211com *,
99 1.1 dyoung struct ieee80211_node *, int);
100 1.1.1.4 dyoung void (*ic_updateslot)(struct ifnet *);
101 1.1.1.4 dyoung void (*ic_set_tim)(struct ieee80211com *,
102 1.1.1.4 dyoung struct ieee80211_node *, int);
103 1.1 dyoung u_int8_t ic_myaddr[IEEE80211_ADDR_LEN];
104 1.1 dyoung struct ieee80211_rateset ic_sup_rates[IEEE80211_MODE_MAX];
105 1.1 dyoung struct ieee80211_channel ic_channels[IEEE80211_CHAN_MAX+1];
106 1.1.1.4 dyoung u_int8_t ic_chan_avail[IEEE80211_CHAN_BYTES];
107 1.1.1.4 dyoung u_int8_t ic_chan_active[IEEE80211_CHAN_BYTES];
108 1.1.1.4 dyoung u_int8_t ic_chan_scan[IEEE80211_CHAN_BYTES];
109 1.1.1.4 dyoung struct ieee80211_node_table ic_scan; /* scan candidates */
110 1.1 dyoung struct ifqueue ic_mgtq;
111 1.1 dyoung u_int32_t ic_flags; /* state flags */
112 1.1 dyoung u_int32_t ic_caps; /* capabilities */
113 1.1 dyoung u_int16_t ic_modecaps; /* set of mode capabilities */
114 1.1 dyoung u_int16_t ic_curmode; /* current mode */
115 1.1 dyoung enum ieee80211_phytype ic_phytype; /* XXX wrong for multi-mode */
116 1.1 dyoung enum ieee80211_opmode ic_opmode; /* operation mode */
117 1.1 dyoung enum ieee80211_state ic_state; /* 802.11 state */
118 1.1.1.3 dyoung enum ieee80211_protmode ic_protmode; /* 802.11g protection mode */
119 1.1.1.4 dyoung enum ieee80211_roamingmode ic_roaming; /* roaming mode */
120 1.1.1.4 dyoung struct ieee80211_node_table ic_sta; /* stations/neighbors */
121 1.1.1.4 dyoung u_int32_t *ic_aid_bitmap; /* association id map */
122 1.1.1.4 dyoung u_int16_t ic_max_aid;
123 1.1.1.4 dyoung u_int16_t ic_sta_assoc; /* stations associated */
124 1.1.1.4 dyoung u_int16_t ic_ps_sta; /* stations in power save */
125 1.1.1.4 dyoung u_int16_t ic_ps_pending; /* ps sta's w/ pending frames */
126 1.1.1.4 dyoung u_int8_t *ic_tim_bitmap; /* power-save stations w/ data*/
127 1.1.1.4 dyoung u_int16_t ic_tim_len; /* ic_tim_bitmap size (bytes) */
128 1.1.1.5 dyoung u_int8_t ic_dtim_period; /* DTIM period */
129 1.1.1.5 dyoung u_int8_t ic_dtim_count; /* DTIM count for last bcn */
130 1.1 dyoung struct ifmedia ic_media; /* interface media config */
131 1.1 dyoung struct bpf_if *ic_rawbpf; /* packet filter structure */
132 1.1 dyoung struct ieee80211_node *ic_bss; /* information for this node */
133 1.1 dyoung struct ieee80211_channel *ic_ibss_chan;
134 1.1 dyoung int ic_fixed_rate; /* index to ic_sup_rates[] */
135 1.1 dyoung u_int16_t ic_rtsthreshold;
136 1.1 dyoung u_int16_t ic_fragthreshold;
137 1.1.1.4 dyoung struct ieee80211_node *(*ic_node_alloc)(struct ieee80211_node_table*);
138 1.1.1.4 dyoung void (*ic_node_free)(struct ieee80211_node *);
139 1.1.1.4 dyoung void (*ic_node_cleanup)(struct ieee80211_node *);
140 1.1.1.4 dyoung u_int8_t (*ic_node_getrssi)(const struct ieee80211_node*);
141 1.1 dyoung u_int16_t ic_lintval; /* listen interval */
142 1.1 dyoung u_int16_t ic_holdover; /* PM hold over duration */
143 1.1 dyoung u_int16_t ic_txmin; /* min tx retry count */
144 1.1 dyoung u_int16_t ic_txmax; /* max tx retry count */
145 1.1 dyoung u_int16_t ic_txlifetime; /* tx lifetime */
146 1.1.1.4 dyoung u_int16_t ic_txpowlimit; /* global tx power limit */
147 1.1 dyoung u_int16_t ic_bmisstimeout;/* beacon miss threshold (ms) */
148 1.1.1.4 dyoung u_int16_t ic_nonerpsta; /* # non-ERP stations */
149 1.1.1.4 dyoung u_int16_t ic_longslotsta; /* # long slot time stations */
150 1.1 dyoung int ic_mgt_timer; /* mgmt timeout */
151 1.1 dyoung int ic_inact_timer; /* inactivity timer wait */
152 1.1 dyoung int ic_des_esslen;
153 1.1 dyoung u_int8_t ic_des_essid[IEEE80211_NWID_LEN];
154 1.1 dyoung struct ieee80211_channel *ic_des_chan; /* desired channel */
155 1.1 dyoung u_int8_t ic_des_bssid[IEEE80211_ADDR_LEN];
156 1.1.1.4 dyoung void *ic_opt_ie; /* user-specified IE's */
157 1.1.1.4 dyoung u_int16_t ic_opt_ie_len; /* length of ni_opt_ie */
158 1.1.1.4 dyoung /*
159 1.1.1.4 dyoung * Inactivity timer settings for nodes.
160 1.1.1.4 dyoung */
161 1.1.1.4 dyoung int ic_inact_init; /* initial setting */
162 1.1.1.4 dyoung int ic_inact_auth; /* auth but not assoc setting */
163 1.1.1.4 dyoung int ic_inact_run; /* authorized setting */
164 1.1.1.4 dyoung int ic_inact_probe; /* inactive probe time */
165 1.1.1.4 dyoung
166 1.1.1.4 dyoung /*
167 1.1.1.4 dyoung * WME/WMM state.
168 1.1.1.4 dyoung */
169 1.1.1.4 dyoung struct ieee80211_wme_state ic_wme;
170 1.1.1.4 dyoung
171 1.1.1.4 dyoung /*
172 1.1.1.4 dyoung * Cipher state/configuration.
173 1.1.1.4 dyoung */
174 1.1.1.4 dyoung struct ieee80211_crypto_state ic_crypto;
175 1.1.1.4 dyoung #define ic_nw_keys ic_crypto.cs_nw_keys /* XXX compatibility */
176 1.1.1.4 dyoung #define ic_def_txkey ic_crypto.cs_def_txkey /* XXX compatibility */
177 1.1.1.4 dyoung
178 1.1.1.4 dyoung /*
179 1.1.1.4 dyoung * 802.1x glue. When an authenticator attaches it
180 1.1.1.4 dyoung * fills in this section. We assume that when ic_ec
181 1.1.1.4 dyoung * is setup that the methods are safe to call.
182 1.1.1.4 dyoung */
183 1.1.1.4 dyoung const struct ieee80211_authenticator *ic_auth;
184 1.1.1.4 dyoung struct eapolcom *ic_ec;
185 1.1.1.4 dyoung
186 1.1.1.4 dyoung /*
187 1.1.1.4 dyoung * Access control glue. When a control agent attaches
188 1.1.1.4 dyoung * it fills in this section. We assume that when ic_ac
189 1.1.1.4 dyoung * is setup that the methods are safe to call.
190 1.1.1.4 dyoung */
191 1.1.1.4 dyoung const struct ieee80211_aclator *ic_acl;
192 1.1.1.4 dyoung void *ic_as;
193 1.1 dyoung };
194 1.1 dyoung
195 1.1 dyoung #define IEEE80211_ADDR_EQ(a1,a2) (memcmp(a1,a2,IEEE80211_ADDR_LEN) == 0)
196 1.1 dyoung #define IEEE80211_ADDR_COPY(dst,src) memcpy(dst,src,IEEE80211_ADDR_LEN)
197 1.1 dyoung
198 1.1 dyoung /* ic_flags */
199 1.1.1.5 dyoung /* NB: bits 0x4f available */
200 1.1.1.4 dyoung /* NB: this is intentionally setup to be IEEE80211_CAPINFO_PRIVACY */
201 1.1.1.4 dyoung #define IEEE80211_F_PRIVACY 0x00000010 /* CONF: privacy enabled */
202 1.1.1.5 dyoung #define IEEE80211_F_PUREG 0x00000020 /* CONF: 11g w/o 11b sta's */
203 1.1.1.4 dyoung #define IEEE80211_F_SCAN 0x00000080 /* STATUS: scanning */
204 1.1.1.4 dyoung #define IEEE80211_F_ASCAN 0x00000100 /* STATUS: active scan */
205 1.1.1.4 dyoung #define IEEE80211_F_SIBSS 0x00000200 /* STATUS: start IBSS */
206 1.1.1.4 dyoung /* NB: this is intentionally setup to be IEEE80211_CAPINFO_SHORT_SLOTTIME */
207 1.1.1.4 dyoung #define IEEE80211_F_SHSLOT 0x00000400 /* STATUS: use short slot time*/
208 1.1.1.4 dyoung #define IEEE80211_F_PMGTON 0x00000800 /* CONF: Power mgmt enable */
209 1.1.1.4 dyoung #define IEEE80211_F_DESBSSID 0x00001000 /* CONF: des_bssid is set */
210 1.1.1.4 dyoung #define IEEE80211_F_WME 0x00002000 /* CONF: enable WME use */
211 1.1.1.4 dyoung #define IEEE80211_F_ROAMING 0x00004000 /* CONF: roaming enabled (???)*/
212 1.1.1.4 dyoung #define IEEE80211_F_SWRETRY 0x00008000 /* CONF: sw tx retry enabled */
213 1.1.1.4 dyoung #define IEEE80211_F_TXPOW_FIXED 0x00010000 /* TX Power: fixed rate */
214 1.1.1.4 dyoung #define IEEE80211_F_IBSSON 0x00020000 /* CONF: IBSS creation enable */
215 1.1.1.4 dyoung #define IEEE80211_F_SHPREAMBLE 0x00040000 /* STATUS: use short preamble */
216 1.1.1.4 dyoung #define IEEE80211_F_DATAPAD 0x00080000 /* CONF: do alignment pad */
217 1.1.1.3 dyoung #define IEEE80211_F_USEPROT 0x00100000 /* STATUS: protection enabled */
218 1.1.1.3 dyoung #define IEEE80211_F_USEBARKER 0x00200000 /* STATUS: use barker preamble*/
219 1.1.1.4 dyoung #define IEEE80211_F_TIMUPDATE 0x00400000 /* STATUS: update beacon tim */
220 1.1.1.4 dyoung #define IEEE80211_F_WPA1 0x00800000 /* CONF: WPA enabled */
221 1.1.1.4 dyoung #define IEEE80211_F_WPA2 0x01000000 /* CONF: WPA2 enabled */
222 1.1.1.4 dyoung #define IEEE80211_F_WPA 0x01800000 /* CONF: WPA/WPA2 enabled */
223 1.1.1.4 dyoung #define IEEE80211_F_DROPUNENC 0x02000000 /* CONF: drop unencrypted */
224 1.1.1.4 dyoung #define IEEE80211_F_COUNTERM 0x04000000 /* CONF: TKIP countermeasures */
225 1.1.1.4 dyoung #define IEEE80211_F_HIDESSID 0x08000000 /* CONF: hide SSID in beacon */
226 1.1.1.4 dyoung #define IEEE80211_F_NOBRIDGE 0x10000000 /* CONF: dis. internal bridge */
227 1.1.1.4 dyoung #define IEEE80211_F_WMEUPDATE 0x20000000 /* STATUS: update beacon wme */
228 1.1 dyoung
229 1.1.1.2 dyoung /* ic_caps */
230 1.1 dyoung #define IEEE80211_C_WEP 0x00000001 /* CAPABILITY: WEP available */
231 1.1.1.4 dyoung #define IEEE80211_C_TKIP 0x00000002 /* CAPABILITY: TKIP available */
232 1.1.1.4 dyoung #define IEEE80211_C_AES 0x00000004 /* CAPABILITY: AES OCB avail */
233 1.1.1.4 dyoung #define IEEE80211_C_AES_CCM 0x00000008 /* CAPABILITY: AES CCM avail */
234 1.1.1.4 dyoung #define IEEE80211_C_CKIP 0x00000020 /* CAPABILITY: CKIP available */
235 1.1.1.4 dyoung #define IEEE80211_C_IBSS 0x00000100 /* CAPABILITY: IBSS available */
236 1.1.1.4 dyoung #define IEEE80211_C_PMGT 0x00000200 /* CAPABILITY: Power mgmt */
237 1.1.1.4 dyoung #define IEEE80211_C_HOSTAP 0x00000400 /* CAPABILITY: HOSTAP avail */
238 1.1.1.4 dyoung #define IEEE80211_C_AHDEMO 0x00000800 /* CAPABILITY: Old Adhoc Demo */
239 1.1.1.4 dyoung #define IEEE80211_C_SWRETRY 0x00001000 /* CAPABILITY: sw tx retry */
240 1.1.1.4 dyoung #define IEEE80211_C_TXPMGT 0x00002000 /* CAPABILITY: tx power mgmt */
241 1.1.1.4 dyoung #define IEEE80211_C_SHSLOT 0x00004000 /* CAPABILITY: short slottime */
242 1.1.1.4 dyoung #define IEEE80211_C_SHPREAMBLE 0x00008000 /* CAPABILITY: short preamble */
243 1.1.1.4 dyoung #define IEEE80211_C_MONITOR 0x00010000 /* CAPABILITY: monitor mode */
244 1.1.1.4 dyoung #define IEEE80211_C_TKIPMIC 0x00020000 /* CAPABILITY: TKIP MIC avail */
245 1.1.1.4 dyoung #define IEEE80211_C_WPA1 0x00800000 /* CAPABILITY: WPA1 avail */
246 1.1.1.4 dyoung #define IEEE80211_C_WPA2 0x01000000 /* CAPABILITY: WPA2 avail */
247 1.1.1.4 dyoung #define IEEE80211_C_WPA 0x01800000 /* CAPABILITY: WPA1+WPA2 avail*/
248 1.1.1.4 dyoung #define IEEE80211_C_BURST 0x02000000 /* CAPABILITY: frame bursting */
249 1.1.1.4 dyoung #define IEEE80211_C_WME 0x04000000 /* CAPABILITY: WME avail */
250 1.1.1.4 dyoung /* XXX protection/barker? */
251 1.1.1.4 dyoung
252 1.1.1.4 dyoung #define IEEE80211_C_CRYPTO 0x0000002f /* CAPABILITY: crypto alg's */
253 1.1.1.4 dyoung
254 1.1.1.4 dyoung void ieee80211_ifattach(struct ieee80211com *);
255 1.1.1.4 dyoung void ieee80211_ifdetach(struct ieee80211com *);
256 1.1.1.4 dyoung void ieee80211_announce(struct ieee80211com *);
257 1.1.1.4 dyoung void ieee80211_media_init(struct ieee80211com *,
258 1.1.1.4 dyoung ifm_change_cb_t, ifm_stat_cb_t);
259 1.1.1.4 dyoung struct ieee80211com *ieee80211_find_vap(const u_int8_t mac[IEEE80211_ADDR_LEN]);
260 1.1 dyoung int ieee80211_media_change(struct ifnet *);
261 1.1 dyoung void ieee80211_media_status(struct ifnet *, struct ifmediareq *);
262 1.1.1.4 dyoung int ieee80211_ioctl(struct ieee80211com *, u_long, caddr_t);
263 1.1.1.4 dyoung int ieee80211_cfgget(struct ieee80211com *, u_long, caddr_t);
264 1.1.1.4 dyoung int ieee80211_cfgset(struct ieee80211com *, u_long, caddr_t);
265 1.1.1.4 dyoung void ieee80211_watchdog(struct ieee80211com *);
266 1.1 dyoung int ieee80211_rate2media(struct ieee80211com *, int,
267 1.1 dyoung enum ieee80211_phymode);
268 1.1 dyoung int ieee80211_media2rate(int);
269 1.1 dyoung u_int ieee80211_mhz2ieee(u_int, u_int);
270 1.1 dyoung u_int ieee80211_chan2ieee(struct ieee80211com *, struct ieee80211_channel *);
271 1.1 dyoung u_int ieee80211_ieee2mhz(u_int, u_int);
272 1.1 dyoung int ieee80211_setmode(struct ieee80211com *, enum ieee80211_phymode);
273 1.1 dyoung enum ieee80211_phymode ieee80211_chan2mode(struct ieee80211com *,
274 1.1 dyoung struct ieee80211_channel *);
275 1.1 dyoung
276 1.1.1.4 dyoung /*
277 1.1.1.4 dyoung * Key update synchronization methods. XXX should not be visible.
278 1.1.1.4 dyoung */
279 1.1.1.4 dyoung static __inline void
280 1.1.1.4 dyoung ieee80211_key_update_begin(struct ieee80211com *ic)
281 1.1.1.4 dyoung {
282 1.1.1.4 dyoung ic->ic_crypto.cs_key_update_begin(ic);
283 1.1.1.4 dyoung }
284 1.1.1.4 dyoung static __inline void
285 1.1.1.4 dyoung ieee80211_key_update_end(struct ieee80211com *ic)
286 1.1.1.4 dyoung {
287 1.1.1.4 dyoung ic->ic_crypto.cs_key_update_end(ic);
288 1.1.1.4 dyoung }
289 1.1.1.4 dyoung
290 1.1.1.4 dyoung /*
291 1.1.1.4 dyoung * XXX these need to be here for IEEE80211_F_DATAPAD
292 1.1.1.4 dyoung */
293 1.1.1.4 dyoung
294 1.1.1.4 dyoung /*
295 1.1.1.4 dyoung * Return the space occupied by the 802.11 header and any
296 1.1.1.4 dyoung * padding required by the driver. This works for a
297 1.1.1.4 dyoung * management or data frame.
298 1.1.1.4 dyoung */
299 1.1.1.4 dyoung static __inline int
300 1.1.1.4 dyoung ieee80211_hdrspace(struct ieee80211com *ic, const void *data)
301 1.1.1.4 dyoung {
302 1.1.1.4 dyoung int size = ieee80211_hdrsize(data);
303 1.1.1.4 dyoung if (ic->ic_flags & IEEE80211_F_DATAPAD)
304 1.1.1.4 dyoung size = roundup(size, sizeof(u_int32_t));
305 1.1.1.4 dyoung return size;
306 1.1.1.4 dyoung }
307 1.1.1.4 dyoung
308 1.1.1.4 dyoung /*
309 1.1.1.4 dyoung * Like ieee80211_hdrspace, but handles any type of frame.
310 1.1.1.4 dyoung */
311 1.1.1.4 dyoung static __inline int
312 1.1.1.4 dyoung ieee80211_anyhdrspace(struct ieee80211com *ic, const void *data)
313 1.1.1.4 dyoung {
314 1.1.1.4 dyoung int size = ieee80211_anyhdrsize(data);
315 1.1.1.4 dyoung if (ic->ic_flags & IEEE80211_F_DATAPAD)
316 1.1.1.4 dyoung size = roundup(size, sizeof(u_int32_t));
317 1.1.1.4 dyoung return size;
318 1.1.1.4 dyoung }
319 1.1.1.4 dyoung
320 1.1.1.4 dyoung #define IEEE80211_MSG_DEBUG 0x40000000 /* IFF_DEBUG equivalent */
321 1.1.1.4 dyoung #define IEEE80211_MSG_DUMPPKTS 0x20000000 /* IFF_LINK2 equivalant */
322 1.1.1.4 dyoung #define IEEE80211_MSG_CRYPTO 0x10000000 /* crypto work */
323 1.1.1.4 dyoung #define IEEE80211_MSG_INPUT 0x08000000 /* input handling */
324 1.1.1.4 dyoung #define IEEE80211_MSG_XRATE 0x04000000 /* rate set handling */
325 1.1.1.4 dyoung #define IEEE80211_MSG_ELEMID 0x02000000 /* element id parsing */
326 1.1.1.4 dyoung #define IEEE80211_MSG_NODE 0x01000000 /* node handling */
327 1.1.1.4 dyoung #define IEEE80211_MSG_ASSOC 0x00800000 /* association handling */
328 1.1.1.4 dyoung #define IEEE80211_MSG_AUTH 0x00400000 /* authentication handling */
329 1.1.1.4 dyoung #define IEEE80211_MSG_SCAN 0x00200000 /* scanning */
330 1.1.1.4 dyoung #define IEEE80211_MSG_OUTPUT 0x00100000 /* output handling */
331 1.1.1.4 dyoung #define IEEE80211_MSG_STATE 0x00080000 /* state machine */
332 1.1.1.4 dyoung #define IEEE80211_MSG_POWER 0x00040000 /* power save handling */
333 1.1.1.4 dyoung #define IEEE80211_MSG_DOT1X 0x00020000 /* 802.1x authenticator */
334 1.1.1.4 dyoung #define IEEE80211_MSG_DOT1XSM 0x00010000 /* 802.1x state machine */
335 1.1.1.4 dyoung #define IEEE80211_MSG_RADIUS 0x00008000 /* 802.1x radius client */
336 1.1.1.4 dyoung #define IEEE80211_MSG_RADDUMP 0x00004000 /* dump 802.1x radius packets */
337 1.1.1.4 dyoung #define IEEE80211_MSG_RADKEYS 0x00002000 /* dump 802.1x keys */
338 1.1.1.4 dyoung #define IEEE80211_MSG_WPA 0x00001000 /* WPA/RSN protocol */
339 1.1.1.4 dyoung #define IEEE80211_MSG_ACL 0x00000800 /* ACL handling */
340 1.1.1.4 dyoung #define IEEE80211_MSG_WME 0x00000400 /* WME protocol */
341 1.1.1.4 dyoung
342 1.1.1.4 dyoung #define IEEE80211_MSG_ANY 0xffffffff /* anything */
343 1.1.1.4 dyoung
344 1.1 dyoung #ifdef IEEE80211_DEBUG
345 1.1.1.4 dyoung #define IEEE80211_DPRINTF(_ic, _m, _fmt, ...) do { \
346 1.1.1.4 dyoung if (_ic->ic_debug & (_m)) \
347 1.1.1.4 dyoung printf(_fmt, __VA_ARGS__); \
348 1.1.1.4 dyoung } while (0)
349 1.1.1.4 dyoung #define ieee80211_msg_debug(_ic) \
350 1.1.1.4 dyoung ((_ic)->ic_debug & IEEE80211_MSG_DEBUG)
351 1.1.1.4 dyoung #define ieee80211_msg_dumppkts(_ic) \
352 1.1.1.4 dyoung ((_ic)->ic_debug & IEEE80211_MSG_DUMPPKTS)
353 1.1.1.4 dyoung #define ieee80211_msg_input(_ic) \
354 1.1.1.4 dyoung ((_ic)->ic_debug & IEEE80211_MSG_INPUT)
355 1.1.1.4 dyoung #define ieee80211_msg_radius(_ic) \
356 1.1.1.4 dyoung ((_ic)->ic_debug & IEEE80211_MSG_RADIUS)
357 1.1.1.4 dyoung #define ieee80211_msg_dumpradius(_ic) \
358 1.1.1.4 dyoung ((_ic)->ic_debug & IEEE80211_MSG_RADDUMP)
359 1.1.1.4 dyoung #define ieee80211_msg_dumpradkeys(_ic) \
360 1.1.1.4 dyoung ((_ic)->ic_debug & IEEE80211_MSG_RADKEYS)
361 1.1.1.4 dyoung #define ieee80211_msg_scan(_ic) \
362 1.1.1.4 dyoung ((_ic)->ic_debug & IEEE80211_MSG_SCAN)
363 1.1 dyoung #else
364 1.1.1.4 dyoung #define IEEE80211_DPRINTF(_ic, _m, _fmt, ...)
365 1.1 dyoung #endif
366 1.1 dyoung
367 1.1 dyoung #endif /* _NET80211_IEEE80211_VAR_H_ */
368