Home | History | Annotate | Line # | Download | only in net80211
ieee80211_var.h revision 1.26.34.1
      1       1.26  christos /*	$NetBSD: ieee80211_var.h,v 1.26.34.1 2008/02/22 16:50:26 skrll Exp $	*/
      2        1.1    dyoung /*-
      3        1.1    dyoung  * Copyright (c) 2001 Atsushi Onoe
      4  1.26.34.1     skrll  * Copyright (c) 2002-2007 Sam Leffler, Errno Consulting
      5        1.1    dyoung  * All rights reserved.
      6        1.1    dyoung  *
      7        1.1    dyoung  * Redistribution and use in source and binary forms, with or without
      8        1.1    dyoung  * modification, are permitted provided that the following conditions
      9        1.1    dyoung  * are met:
     10        1.1    dyoung  * 1. Redistributions of source code must retain the above copyright
     11        1.1    dyoung  *    notice, this list of conditions and the following disclaimer.
     12        1.1    dyoung  * 2. Redistributions in binary form must reproduce the above copyright
     13        1.1    dyoung  *    notice, this list of conditions and the following disclaimer in the
     14        1.1    dyoung  *    documentation and/or other materials provided with the distribution.
     15        1.1    dyoung  *
     16        1.1    dyoung  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     17        1.1    dyoung  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     18        1.1    dyoung  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     19        1.1    dyoung  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     20        1.1    dyoung  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     21        1.1    dyoung  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     22        1.1    dyoung  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     23        1.1    dyoung  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     24        1.1    dyoung  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     25        1.1    dyoung  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     26        1.1    dyoung  *
     27  1.26.34.1     skrll  * $FreeBSD: src/sys/net80211/ieee80211_var.h,v 1.54 2007/11/23 05:57:20 sam Exp $
     28        1.1    dyoung  */
     29        1.1    dyoung #ifndef _NET80211_IEEE80211_VAR_H_
     30        1.1    dyoung #define _NET80211_IEEE80211_VAR_H_
     31        1.1    dyoung 
     32        1.1    dyoung /*
     33        1.1    dyoung  * Definitions for IEEE 802.11 drivers.
     34        1.1    dyoung  */
     35       1.19    dyoung #define	IEEE80211_DEBUG
     36       1.19    dyoung #undef	IEEE80211_DEBUG_REFCNT			/* node refcnt stuff */
     37        1.1    dyoung 
     38       1.15   mycroft /* NB: portability glue must go first */
     39       1.15   mycroft #ifdef __NetBSD__
     40       1.15   mycroft #include <net80211/ieee80211_netbsd.h>
     41       1.15   mycroft #elif __FreeBSD__
     42       1.15   mycroft #include <net80211/ieee80211_freebsd.h>
     43       1.15   mycroft #elif __linux__
     44       1.15   mycroft #include <net80211/ieee80211_linux.h>
     45       1.15   mycroft #else
     46       1.19    dyoung #error	"No support for your operating system!"
     47       1.15   mycroft #endif
     48       1.15   mycroft 
     49       1.19    dyoung #include <sys/queue.h>	/* XXX */
     50       1.15   mycroft 
     51       1.19    dyoung #include <net80211/_ieee80211.h>
     52        1.1    dyoung #include <net80211/ieee80211.h>
     53        1.1    dyoung #include <net80211/ieee80211_crypto.h>
     54        1.5    dyoung #include <net80211/ieee80211_ioctl.h>		/* for ieee80211_stats */
     55        1.1    dyoung #include <net80211/ieee80211_node.h>
     56  1.26.34.1     skrll #include <net80211/ieee80211_power.h>
     57        1.1    dyoung #include <net80211/ieee80211_proto.h>
     58  1.26.34.1     skrll #include <net80211/ieee80211_scan.h>
     59        1.1    dyoung 
     60       1.19    dyoung #define	IEEE80211_TXPOWER_MAX	100	/* .5 dbM (XXX units?) */
     61       1.19    dyoung #define	IEEE80211_TXPOWER_MIN	0	/* kill radio */
     62        1.1    dyoung 
     63       1.19    dyoung #define	IEEE80211_DTIM_DEFAULT	1	/* default DTIM period */
     64       1.19    dyoung #define	IEEE80211_BINTVAL_DEFAULT 100	/* default beacon interval (TU's) */
     65        1.1    dyoung 
     66       1.23    dyoung #define	IEEE80211_BMISS_MAX	2	/* maximum consecutive bmiss allowed */
     67  1.26.34.1     skrll #define	IEEE80211_HWBMISS_DEFAULT 7	/* h/w bmiss threshold (beacons) */
     68  1.26.34.1     skrll 
     69  1.26.34.1     skrll #define	IEEE80211_BGSCAN_INTVAL_MIN	15	/* min bg scan intvl (secs) */
     70  1.26.34.1     skrll #define	IEEE80211_BGSCAN_INTVAL_DEFAULT	(5*60)	/* default bg scan intvl */
     71  1.26.34.1     skrll 
     72  1.26.34.1     skrll #define	IEEE80211_BGSCAN_IDLE_MIN	100	/* min idle time (ms) */
     73  1.26.34.1     skrll #define	IEEE80211_BGSCAN_IDLE_DEFAULT	250	/* default idle time (ms) */
     74  1.26.34.1     skrll 
     75  1.26.34.1     skrll #define	IEEE80211_SCAN_VALID_MIN	10	/* min scan valid time (secs) */
     76  1.26.34.1     skrll #define	IEEE80211_SCAN_VALID_DEFAULT	60	/* default scan valid time */
     77       1.23    dyoung 
     78       1.19    dyoung #define	IEEE80211_PS_SLEEP	0x1	/* STA is in power saving mode */
     79       1.19    dyoung #define	IEEE80211_PS_MAX_QUEUE	50	/* maximum saved packets */
     80        1.1    dyoung 
     81       1.21     skrll #define	IEEE80211_FIXED_RATE_NONE	-1
     82       1.23    dyoung #define	IEEE80211_MCAST_RATE_DEFAULT	(2*1)	/* default mcast rate (1M) */
     83       1.21     skrll 
     84       1.21     skrll #define	IEEE80211_RTS_DEFAULT		IEEE80211_RTS_MAX
     85       1.21     skrll #define	IEEE80211_FRAG_DEFAULT		IEEE80211_FRAG_MAX
     86       1.21     skrll 
     87       1.19    dyoung #define	IEEE80211_MS_TO_TU(x)	(((x) * 1000) / 1024)
     88       1.19    dyoung #define	IEEE80211_TU_TO_MS(x)	(((x) * 1024) / 1000)
     89  1.26.34.1     skrll #define	IEEE80211_TU_TO_TICKS(x)(((x) * 1024 * hz) / (1000 * 1000))
     90        1.6    dyoung 
     91       1.19    dyoung struct ieee80211_aclator;
     92        1.1    dyoung 
     93        1.4    dyoung #define	IEEE80211_PS_SLEEP	0x1	/* STA is in power saving mode */
     94        1.4    dyoung 
     95        1.4    dyoung #define	IEEE80211_PS_MAX_QUEUE	50	/* maximum saved packets */
     96        1.4    dyoung 
     97        1.1    dyoung struct ieee80211com {
     98  1.26.34.1     skrll 	SLIST_ENTRY(ieee80211com) ic_next;	 /* chain of all ieee80211com */
     99  1.26.34.1     skrll 
    100       1.19    dyoung 	struct ifnet		*ic_ifp;	/* associated device */
    101  1.26.34.1     skrll 	ieee80211_com_lock_t	ic_comlock;	/* state update lock */
    102  1.26.34.1     skrll 	ieee80211_beacon_lock_t	ic_beaconlock;	/* beacon update lock */
    103       1.19    dyoung 	struct ieee80211_stats	ic_stats;	/* statistics */
    104       1.19    dyoung 	struct sysctllog	*ic_sysctllog;	/* for destroying sysctl tree */
    105  1.26.34.1     skrll 	uint32_t		ic_debug;	/* debug msg flags */
    106       1.19    dyoung 	int			ic_vap;		/* virtual AP index */
    107  1.26.34.1     skrll 	int			ic_headroom;	/* driver tx headroom needs */
    108  1.26.34.1     skrll 	enum ieee80211_phytype	ic_phytype;	/* XXX wrong for multi-mode */
    109  1.26.34.1     skrll 	enum ieee80211_opmode	ic_opmode;	/* operation mode */
    110  1.26.34.1     skrll 	struct ifmedia		ic_media;	/* interface media config */
    111  1.26.34.1     skrll 	uint8_t			ic_myaddr[IEEE80211_ADDR_LEN];
    112       1.19    dyoung 
    113  1.26.34.1     skrll 	uint32_t		ic_flags;	/* state flags */
    114  1.26.34.1     skrll 	uint32_t		ic_flags_ext;	/* extended state flags */
    115  1.26.34.1     skrll 	uint32_t		ic_flags_ven;	/* vendor state flags */
    116  1.26.34.1     skrll 	uint32_t		ic_caps;	/* capabilities */
    117  1.26.34.1     skrll 	uint32_t		ic_htcaps;	/* HT capabilities */
    118  1.26.34.1     skrll 	uint8_t			ic_modecaps[2];	/* set of mode capabilities */
    119  1.26.34.1     skrll 	uint16_t		ic_curmode;	/* current mode */
    120        1.1    dyoung 	struct ieee80211_rateset ic_sup_rates[IEEE80211_MODE_MAX];
    121  1.26.34.1     skrll 	uint16_t		ic_bintval;	/* beacon interval */
    122  1.26.34.1     skrll 	uint16_t		ic_lintval;	/* listen interval */
    123  1.26.34.1     skrll 	uint16_t		ic_holdover;	/* PM hold over duration */
    124  1.26.34.1     skrll 	uint16_t		ic_txpowlimit;	/* global tx power limit */
    125  1.26.34.1     skrll 	int			ic_ampdu_rxmax;	/* A-MPDU rx limit (bytes) */
    126  1.26.34.1     skrll 	int			ic_ampdu_density;/* A-MPDU density */
    127  1.26.34.1     skrll 	int			ic_ampdu_limit;	/* A-MPDU tx limit (bytes) */
    128  1.26.34.1     skrll 	int			ic_amsdu_limit;	/* A-MSDU tx limit (bytes) */
    129  1.26.34.1     skrll 
    130  1.26.34.1     skrll 	/*
    131  1.26.34.1     skrll 	 * Channel state:
    132  1.26.34.1     skrll 	 *
    133  1.26.34.1     skrll 	 * ic_channels is the set of available channels for the device;
    134  1.26.34.1     skrll 	 *    it is setup by the driver
    135  1.26.34.1     skrll 	 * ic_nchans is the number of valid entries in ic_channels
    136  1.26.34.1     skrll 	 * ic_chan_avail is a bit vector of these channels used to check
    137  1.26.34.1     skrll 	 *    whether a channel is available w/o searching the channel table.
    138  1.26.34.1     skrll 	 * ic_chan_active is a (potentially) constrained subset of
    139  1.26.34.1     skrll 	 *    ic_chan_avail that reflects any mode setting or user-specified
    140  1.26.34.1     skrll 	 *    limit on the set of channels to use/scan
    141  1.26.34.1     skrll 	 * ic_curchan is the current channel the device is set to; it may
    142  1.26.34.1     skrll 	 *    be different from ic_bsschan when we are off-channel scanning
    143  1.26.34.1     skrll 	 *    or otherwise doing background work
    144  1.26.34.1     skrll 	 * ic_bsschan is the channel selected for operation; it may
    145  1.26.34.1     skrll 	 *    be undefined (IEEE80211_CHAN_ANYC)
    146  1.26.34.1     skrll 	 * ic_prevchan is a cached ``previous channel'' used to optimize
    147  1.26.34.1     skrll 	 *    lookups when switching back+forth between two channels
    148  1.26.34.1     skrll 	 *    (e.g. for dynamic turbo)
    149  1.26.34.1     skrll 	 */
    150  1.26.34.1     skrll 	int			ic_nchans;	/* # entries in ic_channels */
    151        1.1    dyoung 	struct ieee80211_channel ic_channels[IEEE80211_CHAN_MAX+1];
    152  1.26.34.1     skrll 	uint8_t			ic_chan_avail[IEEE80211_CHAN_BYTES];
    153  1.26.34.1     skrll 	uint8_t			ic_chan_active[IEEE80211_CHAN_BYTES];
    154  1.26.34.1     skrll 	uint8_t			ic_chan_scan[IEEE80211_CHAN_BYTES];
    155  1.26.34.1     skrll 	struct ieee80211_channel *ic_curchan;	/* current channel */
    156  1.26.34.1     skrll 	struct ieee80211_channel *ic_bsschan;	/* bss channel */
    157  1.26.34.1     skrll 	struct ieee80211_channel *ic_prevchan;	/* previous channel */
    158  1.26.34.1     skrll 	int			ic_countrycode;	/* ISO country code */
    159  1.26.34.1     skrll 	uint16_t		ic_regdomain;	/* regulatory domain */
    160  1.26.34.1     skrll 	uint8_t			ic_location;	/* unknown, indoor, outdoor */
    161  1.26.34.1     skrll 
    162  1.26.34.1     skrll 	struct ieee80211_scan_state *ic_scan;	/* scan state */
    163       1.19    dyoung 	enum ieee80211_roamingmode ic_roaming;	/* roaming mode */
    164  1.26.34.1     skrll 	int			ic_lastdata;	/* time of last data frame */
    165  1.26.34.1     skrll 	int			ic_lastscan;	/* time last scan completed */
    166  1.26.34.1     skrll 	int			ic_des_nssid;	/* # desired ssids */
    167  1.26.34.1     skrll 	struct ieee80211_scan_ssid ic_des_ssid[1];/* desired ssid table */
    168  1.26.34.1     skrll 	uint8_t			ic_des_bssid[IEEE80211_ADDR_LEN];
    169  1.26.34.1     skrll 	struct ieee80211_channel *ic_des_chan;	/* desired channel */
    170  1.26.34.1     skrll 	int			ic_des_mode;	/* desired phymode */
    171  1.26.34.1     skrll 	u_int			ic_bgscanidle;	/* bg scan idle threshold */
    172  1.26.34.1     skrll 	u_int			ic_bgscanintvl;	/* bg scan min interval */
    173  1.26.34.1     skrll 	u_int			ic_scanvalid;	/* scan cache valid threshold */
    174  1.26.34.1     skrll 	struct ieee80211_roam	ic_roam;	/* sta-mode roaming state */
    175  1.26.34.1     skrll 
    176       1.19    dyoung 	struct ieee80211_node_table ic_sta;	/* stations/neighbors */
    177  1.26.34.1     skrll 
    178  1.26.34.1     skrll 	struct ieee80211_wme_state ic_wme;	/* WME/WMM state */
    179  1.26.34.1     skrll 	const struct ieee80211_aclator *ic_acl;	/* aclator glue */
    180  1.26.34.1     skrll 	void			*ic_as;		/* private aclator state */
    181  1.26.34.1     skrll 
    182  1.26.34.1     skrll 	enum ieee80211_protmode	ic_protmode;	/* 802.11g protection mode */
    183  1.26.34.1     skrll 	uint16_t		ic_nonerpsta;	/* # non-ERP stations */
    184  1.26.34.1     skrll 	uint16_t		ic_longslotsta;	/* # long slot time stations */
    185  1.26.34.1     skrll 	uint16_t		ic_sta_assoc;	/* stations associated */
    186  1.26.34.1     skrll 	uint16_t		ic_ht_sta_assoc;/* HT stations associated */
    187  1.26.34.1     skrll 	uint16_t		ic_ht40_sta_assoc;/* HT40 stations associated */
    188  1.26.34.1     skrll 	uint8_t			ic_curhtprotmode;/* HTINFO bss state */
    189  1.26.34.1     skrll 	enum ieee80211_protmode	ic_htprotmode;	/* HT protection mode */
    190  1.26.34.1     skrll 	int			ic_lastnonerp;	/* last time non-ERP sta noted*/
    191  1.26.34.1     skrll 	int			ic_lastnonht;	/* last time non-HT sta noted */
    192  1.26.34.1     skrll 
    193  1.26.34.1     skrll 	struct ifqueue		ic_mgtq;
    194  1.26.34.1     skrll 	enum ieee80211_state	ic_state;	/* 802.11 state */
    195  1.26.34.1     skrll 	struct callout		ic_mgtsend;	/* mgmt frame response timer */
    196  1.26.34.1     skrll 	uint32_t		*ic_aid_bitmap;	/* association id map */
    197  1.26.34.1     skrll 	uint16_t		ic_max_aid;
    198  1.26.34.1     skrll 	uint16_t		ic_ps_sta;	/* stations in power save */
    199  1.26.34.1     skrll 	uint16_t		ic_ps_pending;	/* ps sta's w/ pending frames */
    200  1.26.34.1     skrll 	uint8_t			*ic_tim_bitmap;	/* power-save stations w/ data*/
    201  1.26.34.1     skrll 	uint16_t		ic_tim_len;	/* ic_tim_bitmap size (bytes) */
    202  1.26.34.1     skrll 	uint8_t			ic_dtim_period;	/* DTIM period */
    203  1.26.34.1     skrll 	uint8_t			ic_dtim_count;	/* DTIM count for last bcn */
    204       1.26  christos 	void *			ic_rawbpf;	/* packet filter structure */
    205  1.26.34.1     skrll 
    206        1.1    dyoung 	struct ieee80211_node	*ic_bss;	/* information for this node */
    207  1.26.34.1     skrll 	int			ic_fixed_rate;	/* 802.11 rate or -1 */
    208       1.23    dyoung 	int			ic_mcast_rate;	/* rate for mcast frames */
    209  1.26.34.1     skrll 	uint16_t		ic_rtsthreshold;
    210  1.26.34.1     skrll 	uint16_t		ic_fragthreshold;
    211  1.26.34.1     skrll 	uint8_t			ic_bmissthreshold;
    212  1.26.34.1     skrll 	uint8_t			ic_bmiss_count;	/* current beacon miss count */
    213       1.23    dyoung 	int			ic_bmiss_max;	/* max bmiss before scan */
    214  1.26.34.1     skrll 	uint16_t		ic_swbmiss_count;/* beacons in last period */
    215  1.26.34.1     skrll 	uint16_t		ic_swbmiss_period;/* s/w bmiss period */
    216  1.26.34.1     skrll 	struct callout		ic_swbmiss;	/* s/w beacon miss timer */
    217  1.26.34.1     skrll 
    218  1.26.34.1     skrll 	uint16_t		ic_txmin;	/* min tx retry count */
    219  1.26.34.1     skrll 	uint16_t		ic_txmax;	/* max tx retry count */
    220  1.26.34.1     skrll 	uint16_t		ic_txlifetime;	/* tx lifetime */
    221  1.26.34.1     skrll 	struct callout		ic_inact;	/* inactivity timer wait */
    222       1.19    dyoung 	void			*ic_opt_ie;	/* user-specified IE's */
    223  1.26.34.1     skrll 	uint16_t		ic_opt_ie_len;	/* length of ni_opt_ie */
    224       1.19    dyoung 	int			ic_inact_init;	/* initial setting */
    225       1.19    dyoung 	int			ic_inact_auth;	/* auth but not assoc setting */
    226       1.19    dyoung 	int			ic_inact_run;	/* authorized setting */
    227       1.19    dyoung 	int			ic_inact_probe;	/* inactive probe time */
    228       1.19    dyoung 
    229       1.19    dyoung 	/*
    230       1.19    dyoung 	 * Cipher state/configuration.
    231       1.19    dyoung 	 */
    232       1.19    dyoung 	struct ieee80211_crypto_state ic_crypto;
    233       1.19    dyoung #define	ic_nw_keys	ic_crypto.cs_nw_keys	/* XXX compatibility */
    234       1.19    dyoung #define	ic_def_txkey	ic_crypto.cs_def_txkey	/* XXX compatibility */
    235       1.19    dyoung 	/*
    236       1.19    dyoung 	 * 802.1x glue.  When an authenticator attaches it
    237       1.19    dyoung 	 * fills in this section.  We assume that when ic_ec
    238       1.19    dyoung 	 * is setup that the methods are safe to call.
    239       1.19    dyoung 	 */
    240       1.19    dyoung 	const struct ieee80211_authenticator *ic_auth;
    241       1.19    dyoung 	struct eapolcom		*ic_ec;
    242       1.19    dyoung 
    243  1.26.34.1     skrll 	/* send/recv 802.11 management frame */
    244  1.26.34.1     skrll 	int			(*ic_send_mgmt)(struct ieee80211com *,
    245  1.26.34.1     skrll 				    struct ieee80211_node *, int, int);
    246  1.26.34.1     skrll 	void			(*ic_recv_mgmt)(struct ieee80211com *,
    247  1.26.34.1     skrll 				    struct mbuf *, struct ieee80211_node *,
    248  1.26.34.1     skrll 				    int, int, int, uint32_t);
    249  1.26.34.1     skrll 	/* send raw 802.11 frame */
    250  1.26.34.1     skrll 	int			(*ic_raw_xmit)(struct ieee80211_node *,
    251  1.26.34.1     skrll 				    struct mbuf *,
    252  1.26.34.1     skrll 				    const struct ieee80211_bpf_params *);
    253  1.26.34.1     skrll 	/* reset device state after 802.11 parameter/state change */
    254  1.26.34.1     skrll 	int			(*ic_reset)(struct ifnet *);
    255  1.26.34.1     skrll 	/* [schedule] beacon frame update */
    256  1.26.34.1     skrll 	void			(*ic_update_beacon)(struct ieee80211com *, int);
    257  1.26.34.1     skrll 	/* update device state for 802.11 slot time change */
    258  1.26.34.1     skrll 	void			(*ic_updateslot)(struct ifnet *);
    259  1.26.34.1     skrll 	/* new station association callback/notification */
    260  1.26.34.1     skrll 	void			(*ic_newassoc)(struct ieee80211_node *, int);
    261  1.26.34.1     skrll 	/* node state management */
    262  1.26.34.1     skrll 	struct ieee80211_node	*(*ic_node_alloc)(struct ieee80211_node_table*);
    263  1.26.34.1     skrll 	void			(*ic_node_free)(struct ieee80211_node *);
    264  1.26.34.1     skrll 	void			(*ic_node_cleanup)(struct ieee80211_node *);
    265  1.26.34.1     skrll 	int8_t			(*ic_node_getrssi)(const struct ieee80211_node*);
    266  1.26.34.1     skrll 	void			(*ic_node_getsignal)(const struct ieee80211_node*,
    267  1.26.34.1     skrll 				    int8_t *, int8_t *);
    268  1.26.34.1     skrll 	/* scanning support */
    269  1.26.34.1     skrll 	void			(*ic_scan_start)(struct ieee80211com *);
    270  1.26.34.1     skrll 	void			(*ic_scan_end)(struct ieee80211com *);
    271  1.26.34.1     skrll 	void			(*ic_set_channel)(struct ieee80211com *);
    272  1.26.34.1     skrll 	void			(*ic_scan_curchan)(struct ieee80211com *,
    273  1.26.34.1     skrll 				    unsigned long);
    274  1.26.34.1     skrll 	void			(*ic_scan_mindwell)(struct ieee80211com *);
    275  1.26.34.1     skrll 	/* per-vap eventually... */
    276  1.26.34.1     skrll 	int			(*ic_newstate)(struct ieee80211com *,
    277  1.26.34.1     skrll 				    enum ieee80211_state, int);
    278  1.26.34.1     skrll 	void			(*ic_set_tim)(struct ieee80211_node *, int);
    279  1.26.34.1     skrll 
    280       1.19    dyoung 	/*
    281  1.26.34.1     skrll 	 * 802.11n ADDBA support.  A simple/generic implementation
    282  1.26.34.1     skrll 	 * of A-MPDU tx aggregation is provided; the driver may
    283  1.26.34.1     skrll 	 * override these methods to provide their own support.
    284  1.26.34.1     skrll 	 * A-MPDU rx re-ordering happens automatically if the
    285  1.26.34.1     skrll 	 * driver passes out-of-order frames to ieee80211_input
    286  1.26.34.1     skrll 	 * from an assocated HT station.
    287       1.19    dyoung 	 */
    288  1.26.34.1     skrll 	void			(*ic_recv_action)(struct ieee80211_node *,
    289  1.26.34.1     skrll 				    const uint8_t *frm, const uint8_t *efrm);
    290  1.26.34.1     skrll 	int			(*ic_send_action)(struct ieee80211_node *,
    291  1.26.34.1     skrll 				    int category, int action,
    292  1.26.34.1     skrll 				    uint16_t args[4]);
    293  1.26.34.1     skrll 	/* start/stop doing A-MPDU tx aggregation for a station */
    294  1.26.34.1     skrll 	int			(*ic_addba_request)(struct ieee80211_node *,
    295  1.26.34.1     skrll 				    struct ieee80211_tx_ampdu *,
    296  1.26.34.1     skrll 				    int dialogtoken, int baparamset,
    297  1.26.34.1     skrll 				    int batimeout);
    298  1.26.34.1     skrll 	int			(*ic_addba_response)(struct ieee80211_node *,
    299  1.26.34.1     skrll 				    struct ieee80211_tx_ampdu *,
    300  1.26.34.1     skrll 				    int status, int baparamset, int batimeout);
    301  1.26.34.1     skrll 	void			(*ic_addba_stop)(struct ieee80211_node *,
    302  1.26.34.1     skrll 				    struct ieee80211_tx_ampdu *);
    303        1.1    dyoung };
    304        1.1    dyoung 
    305  1.26.34.1     skrll SLIST_HEAD(ieee80211_list, ieee80211com);
    306        1.8    dyoung 
    307  1.26.34.1     skrll extern struct ieee80211_list ieee80211_list;
    308        1.8    dyoung 
    309        1.1    dyoung #define	IEEE80211_ADDR_EQ(a1,a2)	(memcmp(a1,a2,IEEE80211_ADDR_LEN) == 0)
    310        1.1    dyoung #define	IEEE80211_ADDR_COPY(dst,src)	memcpy(dst,src,IEEE80211_ADDR_LEN)
    311        1.1    dyoung 
    312        1.1    dyoung /* ic_flags */
    313       1.21     skrll /* NB: bits 0x4c available */
    314  1.26.34.1     skrll #define	IEEE80211_F_TURBOP	0x00000001	/* CONF: ATH Turbo enabled*/
    315  1.26.34.1     skrll #define	IEEE80211_F_COMP	0x00000002	/* CONF: ATH comp enabled */
    316  1.26.34.1     skrll #define	IEEE80211_F_FF		0x00000004	/* CONF: ATH FF enabled */
    317  1.26.34.1     skrll #define	IEEE80211_F_BURST	0x00000008	/* CONF: bursting enabled */
    318       1.19    dyoung /* NB: this is intentionally setup to be IEEE80211_CAPINFO_PRIVACY */
    319       1.19    dyoung #define	IEEE80211_F_PRIVACY	0x00000010	/* CONF: privacy enabled */
    320       1.20    dyoung #define	IEEE80211_F_PUREG	0x00000020	/* CONF: 11g w/o 11b sta's */
    321       1.19    dyoung #define	IEEE80211_F_SCAN	0x00000080	/* STATUS: scanning */
    322       1.19    dyoung #define	IEEE80211_F_ASCAN	0x00000100	/* STATUS: active scan */
    323       1.19    dyoung #define	IEEE80211_F_SIBSS	0x00000200	/* STATUS: start IBSS */
    324       1.19    dyoung /* NB: this is intentionally setup to be IEEE80211_CAPINFO_SHORT_SLOTTIME */
    325       1.19    dyoung #define	IEEE80211_F_SHSLOT	0x00000400	/* STATUS: use short slot time*/
    326       1.19    dyoung #define	IEEE80211_F_PMGTON	0x00000800	/* CONF: Power mgmt enable */
    327       1.19    dyoung #define	IEEE80211_F_DESBSSID	0x00001000	/* CONF: des_bssid is set */
    328       1.19    dyoung #define	IEEE80211_F_WME		0x00002000	/* CONF: enable WME use */
    329       1.21     skrll #define	IEEE80211_F_BGSCAN	0x00004000	/* CONF: bg scan enabled (???)*/
    330       1.19    dyoung #define	IEEE80211_F_SWRETRY	0x00008000	/* CONF: sw tx retry enabled */
    331       1.19    dyoung #define IEEE80211_F_TXPOW_FIXED	0x00010000	/* TX Power: fixed rate */
    332       1.19    dyoung #define	IEEE80211_F_IBSSON	0x00020000	/* CONF: IBSS creation enable */
    333       1.19    dyoung #define	IEEE80211_F_SHPREAMBLE	0x00040000	/* STATUS: use short preamble */
    334       1.19    dyoung #define	IEEE80211_F_DATAPAD	0x00080000	/* CONF: do alignment pad */
    335        1.6    dyoung #define	IEEE80211_F_USEPROT	0x00100000	/* STATUS: protection enabled */
    336        1.6    dyoung #define	IEEE80211_F_USEBARKER	0x00200000	/* STATUS: use barker preamble*/
    337       1.19    dyoung #define	IEEE80211_F_WPA1	0x00800000	/* CONF: WPA enabled */
    338       1.19    dyoung #define	IEEE80211_F_WPA2	0x01000000	/* CONF: WPA2 enabled */
    339       1.19    dyoung #define	IEEE80211_F_WPA		0x01800000	/* CONF: WPA/WPA2 enabled */
    340       1.19    dyoung #define	IEEE80211_F_DROPUNENC	0x02000000	/* CONF: drop unencrypted */
    341       1.19    dyoung #define	IEEE80211_F_COUNTERM	0x04000000	/* CONF: TKIP countermeasures */
    342       1.19    dyoung #define	IEEE80211_F_HIDESSID	0x08000000	/* CONF: hide SSID in beacon */
    343       1.19    dyoung #define	IEEE80211_F_NOBRIDGE	0x10000000	/* CONF: dis. internal bridge */
    344  1.26.34.1     skrll #define	IEEE80211_F_DOTH	0x40000000	/* CONF: 11h enabled */
    345  1.26.34.1     skrll 
    346  1.26.34.1     skrll /* Atheros protocol-specific flags */
    347  1.26.34.1     skrll #define	IEEE80211_F_ATHEROS \
    348  1.26.34.1     skrll 	(IEEE80211_F_FF | IEEE80211_F_COMP | IEEE80211_F_TURBOP)
    349  1.26.34.1     skrll /* Check if an Atheros capability was negotiated for use */
    350  1.26.34.1     skrll #define	IEEE80211_ATH_CAP(ic, ni, bit) \
    351  1.26.34.1     skrll 	((ic)->ic_flags & (ni)->ni_ath_flags & (bit))
    352        1.1    dyoung 
    353       1.21     skrll /* ic_flags_ext */
    354  1.26.34.1     skrll #define	IEEE80211_FEXT_NONHT_PR	 0x00000001	/* STATUS: non-HT sta present */
    355  1.26.34.1     skrll #define	IEEE80211_FEXT_INACT	 0x00000002	/* CONF: sta inact handling */
    356       1.21     skrll /* 0x00000006 reserved */
    357  1.26.34.1     skrll #define	IEEE80211_FEXT_BGSCAN	 0x00000008	/* STATUS: complete bgscan */
    358  1.26.34.1     skrll #define	IEEE80211_FEXT_NONERP_PR 0x00000200	/* STATUS: non-ERP sta present*/
    359  1.26.34.1     skrll #define	IEEE80211_FEXT_SWBMISS	 0x00000400	/* CONF: do bmiss in s/w */
    360       1.25     tacha #define	IEEE80211_FEXT_PROBECHAN 0x00020000	/* CONF: probe passive channel*/
    361  1.26.34.1     skrll #define	IEEE80211_FEXT_HT	 0x00080000	/* CONF: HT supported */
    362  1.26.34.1     skrll #define	IEEE80211_FEXT_AMPDU_TX	 0x00100000	/* CONF: A-MPDU tx supported */
    363  1.26.34.1     skrll #define	IEEE80211_FEXT_AMPDU_RX	 0x00200000	/* CONF: A-MPDU tx supported */
    364  1.26.34.1     skrll #define	IEEE80211_FEXT_AMSDU_TX	 0x00400000	/* CONF: A-MSDU tx supported */
    365  1.26.34.1     skrll #define	IEEE80211_FEXT_AMSDU_RX	 0x00800000	/* CONF: A-MSDU tx supported */
    366  1.26.34.1     skrll #define	IEEE80211_FEXT_USEHT40	 0x01000000	/* CONF: 20/40 use enabled */
    367  1.26.34.1     skrll #define	IEEE80211_FEXT_PUREN	 0x02000000	/* CONF: 11n w/o legacy sta's */
    368  1.26.34.1     skrll #define	IEEE80211_FEXT_SHORTGI20 0x04000000	/* CONF: short GI in HT20 */
    369  1.26.34.1     skrll #define	IEEE80211_FEXT_SHORTGI40 0x08000000	/* CONF: short GI in HT40 */
    370  1.26.34.1     skrll #define	IEEE80211_FEXT_HTCOMPAT  0x10000000	/* CONF: HT vendor OUI's */
    371       1.21     skrll 
    372        1.5    dyoung /* ic_caps */
    373        1.1    dyoung #define	IEEE80211_C_WEP		0x00000001	/* CAPABILITY: WEP available */
    374       1.19    dyoung #define	IEEE80211_C_TKIP	0x00000002	/* CAPABILITY: TKIP available */
    375       1.19    dyoung #define	IEEE80211_C_AES		0x00000004	/* CAPABILITY: AES OCB avail */
    376       1.19    dyoung #define	IEEE80211_C_AES_CCM	0x00000008	/* CAPABILITY: AES CCM avail */
    377       1.19    dyoung #define	IEEE80211_C_CKIP	0x00000020	/* CAPABILITY: CKIP available */
    378       1.21     skrll #define	IEEE80211_C_FF		0x00000040	/* CAPABILITY: ATH FF avail */
    379       1.21     skrll #define	IEEE80211_C_TURBOP	0x00000080	/* CAPABILITY: ATH Turbo avail*/
    380       1.19    dyoung #define	IEEE80211_C_IBSS	0x00000100	/* CAPABILITY: IBSS available */
    381       1.19    dyoung #define	IEEE80211_C_PMGT	0x00000200	/* CAPABILITY: Power mgmt */
    382       1.19    dyoung #define	IEEE80211_C_HOSTAP	0x00000400	/* CAPABILITY: HOSTAP avail */
    383       1.19    dyoung #define	IEEE80211_C_AHDEMO	0x00000800	/* CAPABILITY: Old Adhoc Demo */
    384       1.19    dyoung #define	IEEE80211_C_SWRETRY	0x00001000	/* CAPABILITY: sw tx retry */
    385       1.19    dyoung #define	IEEE80211_C_TXPMGT	0x00002000	/* CAPABILITY: tx power mgmt */
    386       1.19    dyoung #define	IEEE80211_C_SHSLOT	0x00004000	/* CAPABILITY: short slottime */
    387       1.19    dyoung #define	IEEE80211_C_SHPREAMBLE	0x00008000	/* CAPABILITY: short preamble */
    388       1.19    dyoung #define	IEEE80211_C_MONITOR	0x00010000	/* CAPABILITY: monitor mode */
    389       1.19    dyoung #define	IEEE80211_C_TKIPMIC	0x00020000	/* CAPABILITY: TKIP MIC avail */
    390       1.19    dyoung #define	IEEE80211_C_WPA1	0x00800000	/* CAPABILITY: WPA1 avail */
    391       1.19    dyoung #define	IEEE80211_C_WPA2	0x01000000	/* CAPABILITY: WPA2 avail */
    392       1.19    dyoung #define	IEEE80211_C_WPA		0x01800000	/* CAPABILITY: WPA1+WPA2 avail*/
    393       1.19    dyoung #define	IEEE80211_C_BURST	0x02000000	/* CAPABILITY: frame bursting */
    394       1.19    dyoung #define	IEEE80211_C_WME		0x04000000	/* CAPABILITY: WME avail */
    395       1.21     skrll #define	IEEE80211_C_WDS		0x08000000	/* CAPABILITY: 4-addr support */
    396       1.21     skrll /* 0x10000000 reserved */
    397       1.21     skrll #define	IEEE80211_C_BGSCAN	0x20000000	/* CAPABILITY: bg scanning */
    398       1.21     skrll #define	IEEE80211_C_TXFRAG	0x40000000	/* CAPABILITY: tx fragments */
    399       1.19    dyoung /* XXX protection/barker? */
    400       1.19    dyoung 
    401       1.19    dyoung #define	IEEE80211_C_CRYPTO	0x0000002f	/* CAPABILITY: crypto alg's */
    402       1.19    dyoung 
    403  1.26.34.1     skrll /*
    404  1.26.34.1     skrll  * ic_htcaps: HT-specific device/driver capabilities
    405  1.26.34.1     skrll  *
    406  1.26.34.1     skrll  * NB: the low 16-bits are the 802.11 definitions, the upper
    407  1.26.34.1     skrll  *     16-bits are used to define s/w/driver capabilities.
    408  1.26.34.1     skrll  */
    409  1.26.34.1     skrll #define	IEEE80211_HTC_AMPDU	0x00010000	/* CAPABILITY: A-MPDU tx */
    410  1.26.34.1     skrll #define	IEEE80211_HTC_AMSDU	0x00020000	/* CAPABILITY: A-MSDU tx */
    411  1.26.34.1     skrll /* NB: HT40 is implied by IEEE80211_HTCAP_CHWIDTH40 */
    412  1.26.34.1     skrll #define	IEEE80211_HTC_HT	0x00040000	/* CAPABILITY: HT operation */
    413  1.26.34.1     skrll 
    414       1.19    dyoung void	ieee80211_ifattach(struct ieee80211com *);
    415       1.19    dyoung void	ieee80211_ifdetach(struct ieee80211com *);
    416  1.26.34.1     skrll const struct ieee80211_rateset *ieee80211_get_suprates(struct ieee80211com *ic,
    417  1.26.34.1     skrll 		const struct ieee80211_channel *);
    418       1.19    dyoung void	ieee80211_announce(struct ieee80211com *);
    419  1.26.34.1     skrll void	ieee80211_announce_channels(struct ieee80211com *);
    420       1.19    dyoung void	ieee80211_media_init(struct ieee80211com *,
    421       1.19    dyoung 		ifm_change_cb_t, ifm_stat_cb_t);
    422  1.26.34.1     skrll struct ieee80211com *ieee80211_find_vap(const uint8_t mac[IEEE80211_ADDR_LEN]);
    423        1.1    dyoung int	ieee80211_media_change(struct ifnet *);
    424        1.1    dyoung void	ieee80211_media_status(struct ifnet *, struct ifmediareq *);
    425       1.26  christos int	ieee80211_ioctl(struct ieee80211com *, u_long, void *);
    426       1.26  christos int	ieee80211_cfgget(struct ieee80211com *, u_long, void *);
    427       1.26  christos int	ieee80211_cfgset(struct ieee80211com *, u_long, void *);
    428       1.19    dyoung void	ieee80211_watchdog(struct ieee80211com *);
    429        1.1    dyoung int	ieee80211_rate2media(struct ieee80211com *, int,
    430        1.1    dyoung 		enum ieee80211_phymode);
    431        1.1    dyoung int	ieee80211_media2rate(int);
    432  1.26.34.1     skrll int	ieee80211_mhz2ieee(u_int, u_int);
    433  1.26.34.1     skrll int	ieee80211_chan2ieee(struct ieee80211com *,
    434  1.26.34.1     skrll 		const struct ieee80211_channel *);
    435        1.1    dyoung u_int	ieee80211_ieee2mhz(u_int, u_int);
    436  1.26.34.1     skrll struct ieee80211_channel *ieee80211_find_channel(struct ieee80211com *,
    437  1.26.34.1     skrll 		int freq, int flags);
    438  1.26.34.1     skrll struct ieee80211_channel *ieee80211_find_channel_byieee(struct ieee80211com *,
    439  1.26.34.1     skrll 		int ieee, int flags);
    440        1.1    dyoung int	ieee80211_setmode(struct ieee80211com *, enum ieee80211_phymode);
    441  1.26.34.1     skrll enum ieee80211_phymode ieee80211_chan2mode(const struct ieee80211_channel *);
    442       1.24    dyoung int	ieee80211_get_rate(const struct ieee80211_node *);
    443       1.19    dyoung 
    444       1.19    dyoung /*
    445       1.19    dyoung  * Key update synchronization methods.  XXX should not be visible.
    446       1.19    dyoung  */
    447       1.19    dyoung static __inline void
    448       1.19    dyoung ieee80211_key_update_begin(struct ieee80211com *ic)
    449       1.19    dyoung {
    450       1.19    dyoung 	ic->ic_crypto.cs_key_update_begin(ic);
    451       1.19    dyoung }
    452       1.19    dyoung static __inline void
    453       1.19    dyoung ieee80211_key_update_end(struct ieee80211com *ic)
    454       1.19    dyoung {
    455       1.19    dyoung 	ic->ic_crypto.cs_key_update_end(ic);
    456       1.19    dyoung }
    457       1.19    dyoung 
    458       1.19    dyoung /*
    459       1.19    dyoung  * XXX these need to be here for IEEE80211_F_DATAPAD
    460       1.19    dyoung  */
    461       1.19    dyoung 
    462       1.19    dyoung /*
    463       1.19    dyoung  * Return the space occupied by the 802.11 header and any
    464       1.19    dyoung  * padding required by the driver.  This works for a
    465       1.19    dyoung  * management or data frame.
    466       1.19    dyoung  */
    467       1.19    dyoung static __inline int
    468       1.19    dyoung ieee80211_hdrspace(struct ieee80211com *ic, const void *data)
    469       1.19    dyoung {
    470       1.19    dyoung 	int size = ieee80211_hdrsize(data);
    471       1.19    dyoung 	if (ic->ic_flags & IEEE80211_F_DATAPAD)
    472  1.26.34.1     skrll 		size = roundup(size, sizeof(uint32_t));
    473       1.19    dyoung 	return size;
    474       1.19    dyoung }
    475       1.19    dyoung 
    476       1.19    dyoung /*
    477       1.19    dyoung  * Like ieee80211_hdrspace, but handles any type of frame.
    478       1.19    dyoung  */
    479       1.19    dyoung static __inline int
    480       1.19    dyoung ieee80211_anyhdrspace(struct ieee80211com *ic, const void *data)
    481       1.19    dyoung {
    482       1.19    dyoung 	int size = ieee80211_anyhdrsize(data);
    483       1.19    dyoung 	if (ic->ic_flags & IEEE80211_F_DATAPAD)
    484  1.26.34.1     skrll 		size = roundup(size, sizeof(uint32_t));
    485       1.19    dyoung 	return size;
    486       1.19    dyoung }
    487        1.1    dyoung 
    488  1.26.34.1     skrll /*
    489  1.26.34.1     skrll  * Notify a driver that beacon state has been updated.
    490  1.26.34.1     skrll  */
    491  1.26.34.1     skrll static __inline void
    492  1.26.34.1     skrll ieee80211_beacon_notify(struct ieee80211com *ic, int what)
    493  1.26.34.1     skrll {
    494  1.26.34.1     skrll 	if (ic->ic_state == IEEE80211_S_RUN)
    495  1.26.34.1     skrll 		ic->ic_update_beacon(ic, what);
    496  1.26.34.1     skrll }
    497  1.26.34.1     skrll 
    498  1.26.34.1     skrll /*
    499  1.26.34.1     skrll  * Debugging facilities compiled in when IEEE80211_DEBUG is defined.
    500  1.26.34.1     skrll  *
    501  1.26.34.1     skrll  * The intent is that any problem in the net80211 layer can be
    502  1.26.34.1     skrll  * diagnosed by inspecting the statistics (dumped by the wlanstats
    503  1.26.34.1     skrll  * program) and/or the msgs generated by net80211.  Messages are
    504  1.26.34.1     skrll  * broken into functional classes and can be controlled with the
    505  1.26.34.1     skrll  * wlandebug program.  Certain of these msg groups are for facilities
    506  1.26.34.1     skrll  * that are no longer part of net80211 (e.g. IEEE80211_MSG_DOT1X).
    507  1.26.34.1     skrll  */
    508  1.26.34.1     skrll #define	IEEE80211_MSG_11N	0x80000000	/* 11n mode debug */
    509       1.11   mycroft #define	IEEE80211_MSG_DEBUG	0x40000000	/* IFF_DEBUG equivalent */
    510       1.11   mycroft #define	IEEE80211_MSG_DUMPPKTS	0x20000000	/* IFF_LINK2 equivalant */
    511       1.11   mycroft #define	IEEE80211_MSG_CRYPTO	0x10000000	/* crypto work */
    512       1.11   mycroft #define	IEEE80211_MSG_INPUT	0x08000000	/* input handling */
    513       1.11   mycroft #define	IEEE80211_MSG_XRATE	0x04000000	/* rate set handling */
    514       1.11   mycroft #define	IEEE80211_MSG_ELEMID	0x02000000	/* element id parsing */
    515       1.11   mycroft #define	IEEE80211_MSG_NODE	0x01000000	/* node handling */
    516       1.11   mycroft #define	IEEE80211_MSG_ASSOC	0x00800000	/* association handling */
    517       1.11   mycroft #define	IEEE80211_MSG_AUTH	0x00400000	/* authentication handling */
    518       1.11   mycroft #define	IEEE80211_MSG_SCAN	0x00200000	/* scanning */
    519       1.11   mycroft #define	IEEE80211_MSG_OUTPUT	0x00100000	/* output handling */
    520       1.11   mycroft #define	IEEE80211_MSG_STATE	0x00080000	/* state machine */
    521       1.11   mycroft #define	IEEE80211_MSG_POWER	0x00040000	/* power save handling */
    522       1.11   mycroft #define	IEEE80211_MSG_DOT1X	0x00020000	/* 802.1x authenticator */
    523       1.11   mycroft #define	IEEE80211_MSG_DOT1XSM	0x00010000	/* 802.1x state machine */
    524       1.11   mycroft #define	IEEE80211_MSG_RADIUS	0x00008000	/* 802.1x radius client */
    525       1.11   mycroft #define	IEEE80211_MSG_RADDUMP	0x00004000	/* dump 802.1x radius packets */
    526       1.11   mycroft #define	IEEE80211_MSG_RADKEYS	0x00002000	/* dump 802.1x keys */
    527       1.11   mycroft #define	IEEE80211_MSG_WPA	0x00001000	/* WPA/RSN protocol */
    528       1.11   mycroft #define	IEEE80211_MSG_ACL	0x00000800	/* ACL handling */
    529       1.19    dyoung #define	IEEE80211_MSG_WME	0x00000400	/* WME protocol */
    530       1.21     skrll #define	IEEE80211_MSG_SUPERG	0x00000200	/* Atheros SuperG protocol */
    531       1.21     skrll #define	IEEE80211_MSG_DOTH	0x00000100	/* 802.11h support */
    532       1.21     skrll #define	IEEE80211_MSG_INACT	0x00000080	/* inactivity handling */
    533       1.21     skrll #define	IEEE80211_MSG_ROAM	0x00000040	/* sta-mode roaming */
    534  1.26.34.1     skrll #define	IEEE80211_MSG_RATECTL	0x00000020	/* tx rate control */
    535  1.26.34.1     skrll #define	IEEE80211_MSG_ACTION	0x00000010	/* action frame handling */
    536  1.26.34.1     skrll #define	IEEE80211_MSG_WDS	0x00000008	/* WDS handling */
    537  1.26.34.1     skrll #define	IEEE80211_MSG_IOCTL	0x00000004	/* ioctl handling */
    538       1.11   mycroft 
    539       1.11   mycroft #define	IEEE80211_MSG_ANY	0xffffffff	/* anything */
    540       1.11   mycroft 
    541        1.1    dyoung #ifdef IEEE80211_DEBUG
    542       1.21     skrll #define	ieee80211_msg(_ic, _m)	((_ic)->ic_debug & (_m))
    543       1.21     skrll #define	IEEE80211_DPRINTF(_ic, _m, _fmt, ...) do {			\
    544       1.21     skrll 	if (ieee80211_msg(_ic, _m))					\
    545       1.21     skrll 		ieee80211_note(_ic, _fmt, __VA_ARGS__);		\
    546       1.21     skrll } while (0)
    547       1.21     skrll #define	IEEE80211_NOTE(_ic, _m, _ni, _fmt, ...) do {			\
    548       1.21     skrll 	if (ieee80211_msg(_ic, _m))					\
    549       1.21     skrll 		ieee80211_note_mac(_ic, (_ni)->ni_macaddr, _fmt, __VA_ARGS__);\
    550       1.21     skrll } while (0)
    551       1.21     skrll #define	IEEE80211_NOTE_MAC(_ic, _m, _mac, _fmt, ...) do {		\
    552       1.21     skrll 	if (ieee80211_msg(_ic, _m))					\
    553       1.21     skrll 		ieee80211_note_mac(_ic, _mac, _fmt, __VA_ARGS__);	\
    554       1.21     skrll } while (0)
    555       1.21     skrll #define	IEEE80211_NOTE_FRAME(_ic, _m, _wh, _fmt, ...) do {		\
    556       1.21     skrll 	if (ieee80211_msg(_ic, _m))					\
    557       1.21     skrll 		ieee80211_note_frame(_ic, _wh, _fmt, __VA_ARGS__);	\
    558       1.11   mycroft } while (0)
    559       1.21     skrll void	ieee80211_note(struct ieee80211com *ic, const char *fmt, ...);
    560       1.21     skrll void	ieee80211_note_mac(struct ieee80211com *ic,
    561  1.26.34.1     skrll 		const uint8_t mac[IEEE80211_ADDR_LEN], const char *fmt, ...);
    562       1.21     skrll void	ieee80211_note_frame(struct ieee80211com *ic,
    563       1.21     skrll 		const struct ieee80211_frame *wh, const char *fmt, ...);
    564       1.11   mycroft #define	ieee80211_msg_debug(_ic) \
    565       1.19    dyoung 	((_ic)->ic_debug & IEEE80211_MSG_DEBUG)
    566       1.11   mycroft #define	ieee80211_msg_dumppkts(_ic) \
    567       1.19    dyoung 	((_ic)->ic_debug & IEEE80211_MSG_DUMPPKTS)
    568       1.11   mycroft #define	ieee80211_msg_input(_ic) \
    569       1.19    dyoung 	((_ic)->ic_debug & IEEE80211_MSG_INPUT)
    570       1.11   mycroft #define	ieee80211_msg_radius(_ic) \
    571       1.19    dyoung 	((_ic)->ic_debug & IEEE80211_MSG_RADIUS)
    572       1.11   mycroft #define	ieee80211_msg_dumpradius(_ic) \
    573       1.19    dyoung 	((_ic)->ic_debug & IEEE80211_MSG_RADDUMP)
    574       1.11   mycroft #define	ieee80211_msg_dumpradkeys(_ic) \
    575       1.19    dyoung 	((_ic)->ic_debug & IEEE80211_MSG_RADKEYS)
    576       1.11   mycroft #define	ieee80211_msg_scan(_ic) \
    577       1.19    dyoung 	((_ic)->ic_debug & IEEE80211_MSG_SCAN)
    578       1.21     skrll #define	ieee80211_msg_assoc(_ic) \
    579       1.21     skrll 	((_ic)->ic_debug & IEEE80211_MSG_ASSOC)
    580  1.26.34.1     skrll 
    581  1.26.34.1     skrll /*
    582  1.26.34.1     skrll  * Emit a debug message about discarding a frame or information
    583  1.26.34.1     skrll  * element.  One format is for extracting the mac address from
    584  1.26.34.1     skrll  * the frame header; the other is for when a header is not
    585  1.26.34.1     skrll  * available or otherwise appropriate.
    586  1.26.34.1     skrll  */
    587  1.26.34.1     skrll #define	IEEE80211_DISCARD(_ic, _m, _wh, _type, _fmt, ...) do {		\
    588  1.26.34.1     skrll 	if ((_ic)->ic_debug & (_m))					\
    589  1.26.34.1     skrll 		ieee80211_discard_frame(_ic, _wh, _type, _fmt, __VA_ARGS__);\
    590  1.26.34.1     skrll } while (0)
    591  1.26.34.1     skrll #define	IEEE80211_DISCARD_IE(_ic, _m, _wh, _type, _fmt, ...) do {	\
    592  1.26.34.1     skrll 	if ((_ic)->ic_debug & (_m))					\
    593  1.26.34.1     skrll 		ieee80211_discard_ie(_ic, _wh, _type, _fmt, __VA_ARGS__);\
    594  1.26.34.1     skrll } while (0)
    595  1.26.34.1     skrll #define	IEEE80211_DISCARD_MAC(_ic, _m, _mac, _type, _fmt, ...) do {	\
    596  1.26.34.1     skrll 	if ((_ic)->ic_debug & (_m))					\
    597  1.26.34.1     skrll 		ieee80211_discard_mac(_ic, _mac, _type, _fmt, __VA_ARGS__);\
    598  1.26.34.1     skrll } while (0)
    599  1.26.34.1     skrll 
    600  1.26.34.1     skrll void ieee80211_discard_frame(struct ieee80211com *,
    601  1.26.34.1     skrll 	const struct ieee80211_frame *, const char *type, const char *fmt, ...);
    602  1.26.34.1     skrll void ieee80211_discard_ie(struct ieee80211com *,
    603  1.26.34.1     skrll 	const struct ieee80211_frame *, const char *type, const char *fmt, ...);
    604  1.26.34.1     skrll void ieee80211_discard_mac(struct ieee80211com *,
    605  1.26.34.1     skrll 	const uint8_t mac[IEEE80211_ADDR_LEN], const char *type,
    606  1.26.34.1     skrll 	const char *fmt, ...);
    607        1.1    dyoung #else
    608       1.19    dyoung #define	IEEE80211_DPRINTF(_ic, _m, _fmt, ...)
    609  1.26.34.1     skrll #define	IEEE80211_NOTE(_ic, _m, _ni, _fmt, ...)
    610       1.21     skrll #define	IEEE80211_NOTE_FRAME(_ic, _m, _wh, _fmt, ...)
    611       1.21     skrll #define	IEEE80211_NOTE_MAC(_ic, _m, _mac, _fmt, ...)
    612       1.21     skrll #define	ieee80211_msg_dumppkts(_ic)	0
    613       1.21     skrll #define	ieee80211_msg(_ic, _m)		0
    614  1.26.34.1     skrll 
    615  1.26.34.1     skrll #define	IEEE80211_DISCARD(_ic, _m, _wh, _type, _fmt, ...)
    616  1.26.34.1     skrll #define	IEEE80211_DISCARD_IE(_ic, _m, _wh, _type, _fmt, ...)
    617  1.26.34.1     skrll #define	IEEE80211_DISCARD_MAC(_ic, _m, _mac, _type, _fmt, ...)
    618        1.1    dyoung #endif
    619        1.1    dyoung 
    620       1.22      elad #endif /* !_NET80211_IEEE80211_VAR_H_ */
    621