Home | History | Annotate | Line # | Download | only in net80211
ieee80211_var.h revision 1.33.2.1
      1       1.1   dyoung /*-
      2  1.33.2.1     phil  * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
      3  1.33.2.1     phil  *
      4       1.1   dyoung  * Copyright (c) 2001 Atsushi Onoe
      5  1.33.2.1     phil  * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
      6       1.1   dyoung  * All rights reserved.
      7       1.1   dyoung  *
      8       1.1   dyoung  * Redistribution and use in source and binary forms, with or without
      9       1.1   dyoung  * modification, are permitted provided that the following conditions
     10       1.1   dyoung  * are met:
     11       1.1   dyoung  * 1. Redistributions of source code must retain the above copyright
     12       1.1   dyoung  *    notice, this list of conditions and the following disclaimer.
     13       1.1   dyoung  * 2. Redistributions in binary form must reproduce the above copyright
     14       1.1   dyoung  *    notice, this list of conditions and the following disclaimer in the
     15       1.1   dyoung  *    documentation and/or other materials provided with the distribution.
     16       1.1   dyoung  *
     17       1.1   dyoung  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     18       1.1   dyoung  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     19       1.1   dyoung  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     20       1.1   dyoung  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     21       1.1   dyoung  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     22       1.1   dyoung  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     23       1.1   dyoung  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     24       1.1   dyoung  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     25       1.1   dyoung  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     26       1.1   dyoung  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     27       1.1   dyoung  *
     28  1.33.2.1     phil  * $FreeBSD$
     29       1.1   dyoung  */
     30       1.1   dyoung #ifndef _NET80211_IEEE80211_VAR_H_
     31       1.1   dyoung #define _NET80211_IEEE80211_VAR_H_
     32       1.1   dyoung 
     33       1.1   dyoung /*
     34       1.1   dyoung  * Definitions for IEEE 802.11 drivers.
     35       1.1   dyoung  */
     36      1.15  mycroft /* NB: portability glue must go first */
     37  1.33.2.1     phil #if defined(__NetBSD__)
     38      1.15  mycroft #include <net80211/ieee80211_netbsd.h>
     39  1.33.2.1     phil #elif defined(__FreeBSD__)
     40      1.15  mycroft #include <net80211/ieee80211_freebsd.h>
     41  1.33.2.1     phil #elif defined(__linux__)
     42      1.15  mycroft #include <net80211/ieee80211_linux.h>
     43      1.15  mycroft #else
     44      1.19   dyoung #error	"No support for your operating system!"
     45      1.15  mycroft #endif
     46      1.15  mycroft 
     47      1.19   dyoung #include <net80211/_ieee80211.h>
     48       1.1   dyoung #include <net80211/ieee80211.h>
     49  1.33.2.1     phil #include <net80211/ieee80211_ageq.h>
     50       1.1   dyoung #include <net80211/ieee80211_crypto.h>
     51  1.33.2.1     phil #include <net80211/ieee80211_dfs.h>
     52       1.5   dyoung #include <net80211/ieee80211_ioctl.h>		/* for ieee80211_stats */
     53  1.33.2.1     phil #include <net80211/ieee80211_phy.h>
     54  1.33.2.1     phil #include <net80211/ieee80211_power.h>
     55       1.1   dyoung #include <net80211/ieee80211_node.h>
     56       1.1   dyoung #include <net80211/ieee80211_proto.h>
     57  1.33.2.1     phil #include <net80211/ieee80211_radiotap.h>
     58  1.33.2.1     phil #include <net80211/ieee80211_scan.h>
     59       1.1   dyoung 
     60  1.33.2.1     phil #define	IEEE80211_TXPOWER_MAX	100	/* .5 dBm (XXX units?) */
     61      1.19   dyoung #define	IEEE80211_TXPOWER_MIN	0	/* kill radio */
     62       1.1   dyoung 
     63      1.19   dyoung #define	IEEE80211_DTIM_DEFAULT	1	/* default DTIM period */
     64      1.19   dyoung #define	IEEE80211_BINTVAL_DEFAULT 100	/* default beacon interval (TU's) */
     65       1.1   dyoung 
     66      1.23   dyoung #define	IEEE80211_BMISS_MAX	2	/* maximum consecutive bmiss allowed */
     67  1.33.2.1     phil #define	IEEE80211_HWBMISS_DEFAULT 7	/* h/w bmiss threshold (beacons) */
     68  1.33.2.1     phil 
     69  1.33.2.1     phil #define	IEEE80211_BGSCAN_INTVAL_MIN	15	/* min bg scan intvl (secs) */
     70  1.33.2.1     phil #define	IEEE80211_BGSCAN_INTVAL_DEFAULT	(5*60)	/* default bg scan intvl */
     71  1.33.2.1     phil 
     72  1.33.2.1     phil #define	IEEE80211_BGSCAN_IDLE_MIN	100	/* min idle time (ms) */
     73  1.33.2.1     phil #define	IEEE80211_BGSCAN_IDLE_DEFAULT	250	/* default idle time (ms) */
     74  1.33.2.1     phil 
     75  1.33.2.1     phil #define	IEEE80211_SCAN_VALID_MIN	10	/* min scan valid time (secs) */
     76  1.33.2.1     phil #define	IEEE80211_SCAN_VALID_DEFAULT	60	/* default scan valid time */
     77      1.23   dyoung 
     78      1.19   dyoung #define	IEEE80211_PS_SLEEP	0x1	/* STA is in power saving mode */
     79      1.19   dyoung #define	IEEE80211_PS_MAX_QUEUE	50	/* maximum saved packets */
     80       1.1   dyoung 
     81  1.33.2.1     phil #define	IEEE80211_FIXED_RATE_NONE	0xff
     82  1.33.2.1     phil #define	IEEE80211_TXMAX_DEFAULT		6	/* default ucast max retries */
     83      1.21    skrll 
     84      1.21    skrll #define	IEEE80211_RTS_DEFAULT		IEEE80211_RTS_MAX
     85      1.21    skrll #define	IEEE80211_FRAG_DEFAULT		IEEE80211_FRAG_MAX
     86      1.21    skrll 
     87      1.19   dyoung #define	IEEE80211_MS_TO_TU(x)	(((x) * 1000) / 1024)
     88      1.19   dyoung #define	IEEE80211_TU_TO_MS(x)	(((x) * 1024) / 1000)
     89  1.33.2.1     phil /* XXX TODO: cap this at 1, in case hz is not 1000 */
     90  1.33.2.1     phil #define	IEEE80211_TU_TO_TICKS(x)(((uint64_t)(x) * 1024 * hz) / (1000 * 1000))
     91       1.6   dyoung 
     92  1.33.2.1     phil /*
     93  1.33.2.1     phil  * Technically, vhtflags may be 0 /and/ 11ac is enabled.
     94  1.33.2.1     phil  * At some point ic should just grow a flag somewhere that
     95  1.33.2.1     phil  * says that VHT is supported - and then this macro can be
     96  1.33.2.1     phil  * changed.
     97  1.33.2.1     phil  */
     98  1.33.2.1     phil #define	IEEE80211_CONF_VHT(ic)			\
     99  1.33.2.1     phil 	    ((ic)->ic_flags_ext & IEEE80211_FEXT_VHT)
    100       1.1   dyoung 
    101  1.33.2.1     phil #define	IEEE80211_CONF_SEQNO_OFFLOAD(ic)	\
    102  1.33.2.1     phil 	    ((ic)->ic_flags_ext & IEEE80211_FEXT_SEQNO_OFFLOAD)
    103  1.33.2.1     phil #define	IEEE80211_CONF_FRAG_OFFLOAD(ic)	\
    104  1.33.2.1     phil 	    ((ic)->ic_flags_ext & IEEE80211_FEXT_FRAG_OFFLOAD)
    105       1.4   dyoung 
    106  1.33.2.1     phil /*
    107  1.33.2.1     phil  * 802.11 control state is split into a common portion that maps
    108  1.33.2.1     phil  * 1-1 to a physical device and one or more "Virtual AP's" (VAP)
    109  1.33.2.1     phil  * that are bound to an ieee80211com instance and share a single
    110  1.33.2.1     phil  * underlying device.  Each VAP has a corresponding OS device
    111  1.33.2.1     phil  * entity through which traffic flows and that applications use
    112  1.33.2.1     phil  * for issuing ioctls, etc.
    113  1.33.2.1     phil  */
    114  1.33.2.1     phil 
    115  1.33.2.1     phil /*
    116  1.33.2.1     phil  * Data common to one or more virtual AP's.  State shared by
    117  1.33.2.1     phil  * the underlying device and the net80211 layer is exposed here;
    118  1.33.2.1     phil  * e.g. device-specific callbacks.
    119  1.33.2.1     phil  */
    120  1.33.2.1     phil struct ieee80211vap;
    121  1.33.2.1     phil typedef void (*ieee80211vap_attach)(struct ieee80211vap *);
    122  1.33.2.1     phil 
    123  1.33.2.1     phil struct ieee80211_appie {
    124  1.33.2.1     phil 	uint16_t		ie_len;		/* size of ie_data */
    125  1.33.2.1     phil 	uint8_t			ie_data[];	/* user-specified IE's */
    126  1.33.2.1     phil };
    127  1.33.2.1     phil 
    128  1.33.2.1     phil struct ieee80211_tdma_param;
    129  1.33.2.1     phil struct ieee80211_rate_table;
    130  1.33.2.1     phil struct ieee80211_tx_ampdu;
    131  1.33.2.1     phil struct ieee80211_rx_ampdu;
    132  1.33.2.1     phil struct ieee80211_superg;
    133  1.33.2.1     phil struct ieee80211_frame;
    134       1.4   dyoung 
    135       1.1   dyoung struct ieee80211com {
    136  1.33.2.1     phil 	void			*ic_softc;	/* driver softc */
    137  1.33.2.1     phil 	const char		*ic_name;	/* usually device name */
    138  1.33.2.1     phil 	ieee80211_com_lock_t	ic_comlock;	/* state update lock */
    139  1.33.2.1     phil 	ieee80211_tx_lock_t	ic_txlock;	/* ic/vap TX lock */
    140  1.33.2.1     phil 	ieee80211_ff_lock_t	ic_fflock;	/* stageq/ni_tx_superg lock */
    141  1.33.2.1     phil 	LIST_ENTRY(ieee80211com)   ic_next;	/* on global list */
    142  1.33.2.1     phil 	TAILQ_HEAD(, ieee80211vap) ic_vaps;	/* list of vap instances */
    143  1.33.2.1     phil 	int			ic_headroom;	/* driver tx headroom needs */
    144       1.1   dyoung 	enum ieee80211_phytype	ic_phytype;	/* XXX wrong for multi-mode */
    145       1.1   dyoung 	enum ieee80211_opmode	ic_opmode;	/* operation mode */
    146  1.33.2.1     phil 	struct callout		ic_inact;	/* inactivity processing */
    147  1.33.2.1     phil 	struct taskqueue	*ic_tq;		/* deferred state thread */
    148  1.33.2.1     phil 	struct task		ic_parent_task;	/* deferred parent processing */
    149  1.33.2.1     phil 	struct task		ic_promisc_task;/* deferred promisc update */
    150  1.33.2.1     phil 	struct task		ic_mcast_task;	/* deferred mcast update */
    151  1.33.2.1     phil 	struct task		ic_chan_task;	/* deferred channel change */
    152  1.33.2.1     phil 	struct task		ic_bmiss_task;	/* deferred beacon miss hndlr */
    153  1.33.2.1     phil 	struct task		ic_chw_task;	/* deferred HT CHW update */
    154  1.33.2.1     phil 	struct task		ic_restart_task; /* deferred device restart */
    155  1.33.2.1     phil 
    156  1.33.2.1     phil 	counter_u64_t		ic_ierrors;	/* input errors */
    157  1.33.2.1     phil 	counter_u64_t		ic_oerrors;	/* output errors */
    158  1.33.2.1     phil 
    159  1.33.2.1     phil 	uint32_t		ic_flags;	/* state flags */
    160  1.33.2.1     phil 	uint32_t		ic_flags_ext;	/* extended state flags */
    161  1.33.2.1     phil 	uint32_t		ic_flags_ht;	/* HT state flags */
    162  1.33.2.1     phil 	uint32_t		ic_flags_ven;	/* vendor state flags */
    163  1.33.2.1     phil 	uint32_t		ic_caps;	/* capabilities */
    164  1.33.2.1     phil 	uint32_t		ic_htcaps;	/* HT capabilities */
    165  1.33.2.1     phil 	uint32_t		ic_htextcaps;	/* HT extended capabilities */
    166  1.33.2.1     phil 	uint32_t		ic_cryptocaps;	/* crypto capabilities */
    167  1.33.2.1     phil 						/* set of mode capabilities */
    168  1.33.2.1     phil 	uint8_t			ic_modecaps[IEEE80211_MODE_BYTES];
    169  1.33.2.1     phil 	uint8_t			ic_promisc;	/* vap's needing promisc mode */
    170  1.33.2.1     phil 	uint8_t			ic_allmulti;	/* vap's needing all multicast*/
    171  1.33.2.1     phil 	uint8_t			ic_nrunning;	/* vap's marked running */
    172  1.33.2.1     phil 	uint8_t			ic_curmode;	/* current mode */
    173  1.33.2.1     phil 	uint8_t			ic_macaddr[IEEE80211_ADDR_LEN];
    174  1.33.2.1     phil 	uint16_t		ic_bintval;	/* beacon interval */
    175  1.33.2.1     phil 	uint16_t		ic_lintval;	/* listen interval */
    176  1.33.2.1     phil 	uint16_t		ic_holdover;	/* PM hold over duration */
    177  1.33.2.1     phil 	uint16_t		ic_txpowlimit;	/* global tx power limit */
    178  1.33.2.1     phil 	struct ieee80211_rateset ic_sup_rates[IEEE80211_MODE_MAX];
    179  1.33.2.1     phil 	struct ieee80211_htrateset ic_sup_htrates;
    180      1.19   dyoung 
    181      1.19   dyoung 	/*
    182  1.33.2.1     phil 	 * Channel state:
    183  1.33.2.1     phil 	 *
    184  1.33.2.1     phil 	 * ic_channels is the set of available channels for the device;
    185  1.33.2.1     phil 	 *    it is setup by the driver
    186  1.33.2.1     phil 	 * ic_nchans is the number of valid entries in ic_channels
    187  1.33.2.1     phil 	 * ic_chan_avail is a bit vector of these channels used to check
    188  1.33.2.1     phil 	 *    whether a channel is available w/o searching the channel table.
    189  1.33.2.1     phil 	 * ic_chan_active is a (potentially) constrained subset of
    190  1.33.2.1     phil 	 *    ic_chan_avail that reflects any mode setting or user-specified
    191  1.33.2.1     phil 	 *    limit on the set of channels to use/scan
    192  1.33.2.1     phil 	 * ic_curchan is the current channel the device is set to; it may
    193  1.33.2.1     phil 	 *    be different from ic_bsschan when we are off-channel scanning
    194  1.33.2.1     phil 	 *    or otherwise doing background work
    195  1.33.2.1     phil 	 * ic_bsschan is the channel selected for operation; it may
    196  1.33.2.1     phil 	 *    be undefined (IEEE80211_CHAN_ANYC)
    197  1.33.2.1     phil 	 * ic_prevchan is a cached ``previous channel'' used to optimize
    198  1.33.2.1     phil 	 *    lookups when switching back+forth between two channels
    199  1.33.2.1     phil 	 *    (e.g. for dynamic turbo)
    200      1.19   dyoung 	 */
    201  1.33.2.1     phil 	int			ic_nchans;	/* # entries in ic_channels */
    202  1.33.2.1     phil 	struct ieee80211_channel ic_channels[IEEE80211_CHAN_MAX];
    203  1.33.2.1     phil 	uint8_t			ic_chan_avail[IEEE80211_CHAN_BYTES];
    204  1.33.2.1     phil 	uint8_t			ic_chan_active[IEEE80211_CHAN_BYTES];
    205  1.33.2.1     phil 	uint8_t			ic_chan_scan[IEEE80211_CHAN_BYTES];
    206  1.33.2.1     phil 	struct ieee80211_channel *ic_curchan;	/* current channel */
    207  1.33.2.1     phil 	const struct ieee80211_rate_table *ic_rt; /* table for ic_curchan */
    208  1.33.2.1     phil 	struct ieee80211_channel *ic_bsschan;	/* bss channel */
    209  1.33.2.1     phil 	struct ieee80211_channel *ic_prevchan;	/* previous channel */
    210  1.33.2.1     phil 	struct ieee80211_regdomain ic_regdomain;/* regulatory data */
    211  1.33.2.1     phil 	struct ieee80211_appie	*ic_countryie;	/* calculated country ie */
    212  1.33.2.1     phil 	struct ieee80211_channel *ic_countryie_chan;
    213  1.33.2.1     phil 
    214  1.33.2.1     phil 	/* 802.11h/DFS state */
    215  1.33.2.1     phil 	struct ieee80211_channel *ic_csa_newchan;/* channel for doing CSA */
    216  1.33.2.1     phil 	short			ic_csa_mode;	/* mode for doing CSA */
    217  1.33.2.1     phil 	short			ic_csa_count;	/* count for doing CSA */
    218  1.33.2.1     phil 	struct ieee80211_dfs_state ic_dfs;	/* DFS state */
    219  1.33.2.1     phil 
    220  1.33.2.1     phil 	struct ieee80211_scan_state *ic_scan;	/* scan state */
    221  1.33.2.1     phil 	struct ieee80211_scan_methods *ic_scan_methods;	/* scan methods */
    222  1.33.2.1     phil 	int			ic_lastdata;	/* time of last data frame */
    223  1.33.2.1     phil 	int			ic_lastscan;	/* time last scan completed */
    224      1.19   dyoung 
    225  1.33.2.1     phil 	/* NB: this is the union of all vap stations/neighbors */
    226  1.33.2.1     phil 	int			ic_max_keyix;	/* max h/w key index */
    227  1.33.2.1     phil 	struct ieee80211_node_table ic_sta;	/* stations/neighbors */
    228  1.33.2.1     phil 	struct ieee80211_ageq	ic_stageq;	/* frame staging queue */
    229  1.33.2.1     phil 	uint32_t		ic_hash_key;	/* random key for mac hash */
    230      1.19   dyoung 
    231  1.33.2.1     phil 	/* XXX multi-bss: split out common/vap parts */
    232  1.33.2.1     phil 	struct ieee80211_wme_state ic_wme;	/* WME/WMM state */
    233  1.33.2.1     phil 
    234  1.33.2.1     phil 	/* XXX multi-bss: can per-vap be done/make sense? */
    235  1.33.2.1     phil 	enum ieee80211_protmode	ic_protmode;	/* 802.11g protection mode */
    236  1.33.2.1     phil 	uint16_t		ic_nonerpsta;	/* # non-ERP stations */
    237  1.33.2.1     phil 	uint16_t		ic_longslotsta;	/* # long slot time stations */
    238  1.33.2.1     phil 	uint16_t		ic_sta_assoc;	/* stations associated */
    239  1.33.2.1     phil 	uint16_t		ic_ht_sta_assoc;/* HT stations associated */
    240  1.33.2.1     phil 	uint16_t		ic_ht40_sta_assoc;/* HT40 stations associated */
    241  1.33.2.1     phil 	uint8_t			ic_curhtprotmode;/* HTINFO bss state */
    242  1.33.2.1     phil 	enum ieee80211_protmode	ic_htprotmode;	/* HT protection mode */
    243  1.33.2.1     phil 	int			ic_lastnonerp;	/* last time non-ERP sta noted*/
    244  1.33.2.1     phil 	int			ic_lastnonht;	/* last time non-HT sta noted */
    245  1.33.2.1     phil 	uint8_t			ic_rxstream;    /* # RX streams */
    246  1.33.2.1     phil 	uint8_t			ic_txstream;    /* # TX streams */
    247  1.33.2.1     phil 
    248  1.33.2.1     phil 	/* VHT information */
    249  1.33.2.1     phil 	uint32_t		ic_vhtcaps;	/* VHT capabilities */
    250  1.33.2.1     phil 	uint32_t		ic_vhtextcaps;	/* VHT extended capabilities (TODO) */
    251  1.33.2.1     phil 	struct ieee80211_vht_mcs_info	ic_vht_mcsinfo; /* Support TX/RX VHT MCS */
    252  1.33.2.1     phil 	uint32_t		ic_flags_vht;	/* VHT state flags */
    253  1.33.2.1     phil 	uint32_t		ic_vht_spare[3];
    254  1.33.2.1     phil 
    255  1.33.2.1     phil 	/* optional state for Atheros SuperG protocol extensions */
    256  1.33.2.1     phil 	struct ieee80211_superg	*ic_superg;
    257  1.33.2.1     phil 
    258  1.33.2.1     phil 	/* radiotap handling */
    259  1.33.2.1     phil 	struct ieee80211_radiotap_header *ic_th;/* tx radiotap headers */
    260  1.33.2.1     phil 	void			*ic_txchan;	/* channel state in ic_th */
    261  1.33.2.1     phil 	struct ieee80211_radiotap_header *ic_rh;/* rx radiotap headers */
    262  1.33.2.1     phil 	void			*ic_rxchan;	/* channel state in ic_rh */
    263  1.33.2.1     phil 	int			ic_montaps;	/* active monitor mode taps */
    264  1.33.2.1     phil 
    265  1.33.2.1     phil 	/* virtual ap create/delete */
    266  1.33.2.1     phil 	struct ieee80211vap*	(*ic_vap_create)(struct ieee80211com *,
    267  1.33.2.1     phil 				    const char [IFNAMSIZ], int,
    268  1.33.2.1     phil 				    enum ieee80211_opmode, int,
    269  1.33.2.1     phil 				    const uint8_t [IEEE80211_ADDR_LEN],
    270  1.33.2.1     phil 				    const uint8_t [IEEE80211_ADDR_LEN]);
    271  1.33.2.1     phil 	void			(*ic_vap_delete)(struct ieee80211vap *);
    272  1.33.2.1     phil 	/* device specific ioctls */
    273  1.33.2.1     phil 	int			(*ic_ioctl)(struct ieee80211com *,
    274  1.33.2.1     phil 				    u_long, void *);
    275  1.33.2.1     phil 	/* start/stop device */
    276  1.33.2.1     phil 	void			(*ic_parent)(struct ieee80211com *);
    277  1.33.2.1     phil 	/* operating mode attachment */
    278  1.33.2.1     phil 	ieee80211vap_attach	ic_vattach[IEEE80211_OPMODE_MAX];
    279  1.33.2.1     phil 	/* return hardware/radio capabilities */
    280  1.33.2.1     phil 	void			(*ic_getradiocaps)(struct ieee80211com *,
    281  1.33.2.1     phil 				    int, int *, struct ieee80211_channel []);
    282  1.33.2.1     phil 	/* check and/or prepare regdomain state change */
    283  1.33.2.1     phil 	int			(*ic_setregdomain)(struct ieee80211com *,
    284  1.33.2.1     phil 				    struct ieee80211_regdomain *,
    285  1.33.2.1     phil 				    int, struct ieee80211_channel []);
    286  1.33.2.1     phil 
    287  1.33.2.1     phil 	int			(*ic_set_quiet)(struct ieee80211_node *,
    288  1.33.2.1     phil 				    u_int8_t *quiet_elm);
    289  1.33.2.1     phil 
    290  1.33.2.1     phil 	/* regular transmit */
    291  1.33.2.1     phil 	int			(*ic_transmit)(struct ieee80211com *,
    292  1.33.2.1     phil 				    struct mbuf *);
    293  1.33.2.1     phil 	/* send/recv 802.11 management frame */
    294  1.33.2.1     phil 	int			(*ic_send_mgmt)(struct ieee80211_node *,
    295  1.33.2.1     phil 				     int, int);
    296  1.33.2.1     phil 	/* send raw 802.11 frame */
    297  1.33.2.1     phil 	int			(*ic_raw_xmit)(struct ieee80211_node *,
    298  1.33.2.1     phil 				    struct mbuf *,
    299  1.33.2.1     phil 				    const struct ieee80211_bpf_params *);
    300  1.33.2.1     phil 	/* update device state for 802.11 slot time change */
    301  1.33.2.1     phil 	void			(*ic_updateslot)(struct ieee80211com *);
    302  1.33.2.1     phil 	/* handle multicast state changes */
    303  1.33.2.1     phil 	void			(*ic_update_mcast)(struct ieee80211com *);
    304  1.33.2.1     phil 	/* handle promiscuous mode changes */
    305  1.33.2.1     phil 	void			(*ic_update_promisc)(struct ieee80211com *);
    306  1.33.2.1     phil 	/* new station association callback/notification */
    307  1.33.2.1     phil 	void			(*ic_newassoc)(struct ieee80211_node *, int);
    308  1.33.2.1     phil 	/* TDMA update notification */
    309  1.33.2.1     phil 	void			(*ic_tdma_update)(struct ieee80211_node *,
    310  1.33.2.1     phil 				    const struct ieee80211_tdma_param *, int);
    311  1.33.2.1     phil 	/* node state management */
    312  1.33.2.1     phil 	struct ieee80211_node*	(*ic_node_alloc)(struct ieee80211vap *,
    313  1.33.2.1     phil 				    const uint8_t [IEEE80211_ADDR_LEN]);
    314  1.33.2.1     phil 	void			(*ic_node_free)(struct ieee80211_node *);
    315  1.33.2.1     phil 	void			(*ic_node_cleanup)(struct ieee80211_node *);
    316  1.33.2.1     phil 	void			(*ic_node_age)(struct ieee80211_node *);
    317  1.33.2.1     phil 	void			(*ic_node_drain)(struct ieee80211_node *);
    318  1.33.2.1     phil 	int8_t			(*ic_node_getrssi)(const struct ieee80211_node*);
    319  1.33.2.1     phil 	void			(*ic_node_getsignal)(const struct ieee80211_node*,
    320  1.33.2.1     phil 				    int8_t *, int8_t *);
    321  1.33.2.1     phil 	void			(*ic_node_getmimoinfo)(
    322  1.33.2.1     phil 				    const struct ieee80211_node*,
    323  1.33.2.1     phil 				    struct ieee80211_mimo_info *);
    324  1.33.2.1     phil 	/* scanning support */
    325  1.33.2.1     phil 	void			(*ic_scan_start)(struct ieee80211com *);
    326  1.33.2.1     phil 	void			(*ic_scan_end)(struct ieee80211com *);
    327  1.33.2.1     phil 	void			(*ic_set_channel)(struct ieee80211com *);
    328  1.33.2.1     phil 	void			(*ic_scan_curchan)(struct ieee80211_scan_state *,
    329  1.33.2.1     phil 				    unsigned long);
    330  1.33.2.1     phil 	void			(*ic_scan_mindwell)(struct ieee80211_scan_state *);
    331      1.19   dyoung 
    332      1.19   dyoung 	/*
    333  1.33.2.1     phil 	 * 802.11n ADDBA support.  A simple/generic implementation
    334  1.33.2.1     phil 	 * of A-MPDU tx aggregation is provided; the driver may
    335  1.33.2.1     phil 	 * override these methods to provide their own support.
    336  1.33.2.1     phil 	 * A-MPDU rx re-ordering happens automatically if the
    337  1.33.2.1     phil 	 * driver passes out-of-order frames to ieee80211_input
    338  1.33.2.1     phil 	 * from an assocated HT station.
    339      1.19   dyoung 	 */
    340  1.33.2.1     phil 	int			(*ic_recv_action)(struct ieee80211_node *,
    341  1.33.2.1     phil 				    const struct ieee80211_frame *,
    342  1.33.2.1     phil 				    const uint8_t *frm, const uint8_t *efrm);
    343  1.33.2.1     phil 	int			(*ic_send_action)(struct ieee80211_node *,
    344  1.33.2.1     phil 				    int category, int action, void *);
    345  1.33.2.1     phil 	/* check if A-MPDU should be enabled this station+ac */
    346  1.33.2.1     phil 	int			(*ic_ampdu_enable)(struct ieee80211_node *,
    347  1.33.2.1     phil 				    struct ieee80211_tx_ampdu *);
    348  1.33.2.1     phil 	/* start/stop doing A-MPDU tx aggregation for a station */
    349  1.33.2.1     phil 	int			(*ic_addba_request)(struct ieee80211_node *,
    350  1.33.2.1     phil 				    struct ieee80211_tx_ampdu *,
    351  1.33.2.1     phil 				    int dialogtoken, int baparamset,
    352  1.33.2.1     phil 				    int batimeout);
    353  1.33.2.1     phil 	int			(*ic_addba_response)(struct ieee80211_node *,
    354  1.33.2.1     phil 				    struct ieee80211_tx_ampdu *,
    355  1.33.2.1     phil 				    int status, int baparamset, int batimeout);
    356  1.33.2.1     phil 	void			(*ic_addba_stop)(struct ieee80211_node *,
    357  1.33.2.1     phil 				    struct ieee80211_tx_ampdu *);
    358  1.33.2.1     phil 	void			(*ic_addba_response_timeout)(struct ieee80211_node *,
    359  1.33.2.1     phil 				    struct ieee80211_tx_ampdu *);
    360  1.33.2.1     phil 	/* BAR response received */
    361  1.33.2.1     phil 	void			(*ic_bar_response)(struct ieee80211_node *,
    362  1.33.2.1     phil 				    struct ieee80211_tx_ampdu *, int status);
    363  1.33.2.1     phil 	/* start/stop doing A-MPDU rx processing for a station */
    364  1.33.2.1     phil 	int			(*ic_ampdu_rx_start)(struct ieee80211_node *,
    365  1.33.2.1     phil 				    struct ieee80211_rx_ampdu *, int baparamset,
    366  1.33.2.1     phil 				    int batimeout, int baseqctl);
    367  1.33.2.1     phil 	void			(*ic_ampdu_rx_stop)(struct ieee80211_node *,
    368  1.33.2.1     phil 				    struct ieee80211_rx_ampdu *);
    369  1.33.2.1     phil 
    370  1.33.2.1     phil 	/* The channel width has changed (20<->2040) */
    371  1.33.2.1     phil 	void			(*ic_update_chw)(struct ieee80211com *);
    372  1.33.2.1     phil 
    373  1.33.2.1     phil 	uint64_t		ic_spare[7];
    374       1.1   dyoung };
    375       1.1   dyoung 
    376  1.33.2.1     phil struct ieee80211_aclator;
    377  1.33.2.1     phil struct ieee80211_tdma_state;
    378  1.33.2.1     phil struct ieee80211_mesh_state;
    379  1.33.2.1     phil struct ieee80211_hwmp_state;
    380  1.33.2.1     phil 
    381  1.33.2.1     phil struct ieee80211vap {
    382  1.33.2.1     phil 	struct ifmedia		iv_media;	/* interface media config */
    383  1.33.2.1     phil 	struct ifnet		*iv_ifp;	/* associated device */
    384  1.33.2.1     phil 	struct bpf_if		*iv_rawbpf;	/* packet filter structure */
    385  1.33.2.1     phil 	struct sysctl_ctx_list	*iv_sysctl;	/* dynamic sysctl context */
    386  1.33.2.1     phil 	struct sysctl_oid	*iv_oid;	/* net.wlan.X sysctl oid */
    387  1.33.2.1     phil 
    388  1.33.2.1     phil 	TAILQ_ENTRY(ieee80211vap) iv_next;	/* list of vap instances */
    389  1.33.2.1     phil 	struct ieee80211com	*iv_ic;		/* back ptr to common state */
    390  1.33.2.1     phil 	/* MAC address: ifp or ic */
    391  1.33.2.1     phil 	uint8_t			iv_myaddr[IEEE80211_ADDR_LEN];
    392  1.33.2.1     phil 	uint32_t		iv_debug;	/* debug msg flags */
    393  1.33.2.1     phil 	struct ieee80211_stats	iv_stats;	/* statistics */
    394  1.33.2.1     phil 
    395  1.33.2.1     phil 	uint32_t		iv_flags;	/* state flags */
    396  1.33.2.1     phil 	uint32_t		iv_flags_ext;	/* extended state flags */
    397  1.33.2.1     phil 	uint32_t		iv_flags_ht;	/* HT state flags */
    398  1.33.2.1     phil 	uint32_t		iv_flags_ven;	/* vendor state flags */
    399  1.33.2.1     phil 	uint32_t		iv_ifflags;	/* ifnet flags */
    400  1.33.2.1     phil 	uint32_t		iv_caps;	/* capabilities */
    401  1.33.2.1     phil 	uint32_t		iv_htcaps;	/* HT capabilities */
    402  1.33.2.1     phil 	uint32_t		iv_htextcaps;	/* HT extended capabilities */
    403  1.33.2.1     phil 	enum ieee80211_opmode	iv_opmode;	/* operation mode */
    404  1.33.2.1     phil 	enum ieee80211_state	iv_state;	/* state machine state */
    405  1.33.2.1     phil 	enum ieee80211_state	iv_nstate;	/* pending state */
    406  1.33.2.1     phil 	int			iv_nstate_arg;	/* pending state arg */
    407  1.33.2.1     phil 	struct task		iv_nstate_task;	/* deferred state processing */
    408  1.33.2.1     phil 	struct task		iv_swbmiss_task;/* deferred iv_bmiss call */
    409  1.33.2.1     phil 	struct callout		iv_mgtsend;	/* mgmt frame response timer */
    410  1.33.2.1     phil 						/* inactivity timer settings */
    411  1.33.2.1     phil 	int			iv_inact_init;	/* setting for new station */
    412  1.33.2.1     phil 	int			iv_inact_auth;	/* auth but not assoc setting */
    413  1.33.2.1     phil 	int			iv_inact_run;	/* authorized setting */
    414  1.33.2.1     phil 	int			iv_inact_probe;	/* inactive probe time */
    415  1.33.2.1     phil 
    416  1.33.2.1     phil 	/* VHT flags */
    417  1.33.2.1     phil 	uint32_t		iv_flags_vht;	/* VHT state flags */
    418  1.33.2.1     phil 	uint32_t		iv_vhtcaps;	/* VHT capabilities */
    419  1.33.2.1     phil 	uint32_t		iv_vhtextcaps;	/* VHT extended capabilities (TODO) */
    420  1.33.2.1     phil 	struct ieee80211_vht_mcs_info	iv_vht_mcsinfo;
    421  1.33.2.1     phil 	uint32_t		iv_vht_spare[4];
    422  1.33.2.1     phil 
    423  1.33.2.1     phil 	int			iv_des_nssid;	/* # desired ssids */
    424  1.33.2.1     phil 	struct ieee80211_scan_ssid iv_des_ssid[1];/* desired ssid table */
    425  1.33.2.1     phil 	uint8_t			iv_des_bssid[IEEE80211_ADDR_LEN];
    426  1.33.2.1     phil 	struct ieee80211_channel *iv_des_chan;	/* desired channel */
    427  1.33.2.1     phil 	uint16_t		iv_des_mode;	/* desired mode */
    428  1.33.2.1     phil 	int			iv_nicknamelen;	/* XXX junk */
    429  1.33.2.1     phil 	uint8_t			iv_nickname[IEEE80211_NWID_LEN];
    430  1.33.2.1     phil 	u_int			iv_bgscanidle;	/* bg scan idle threshold */
    431  1.33.2.1     phil 	u_int			iv_bgscanintvl;	/* bg scan min interval */
    432  1.33.2.1     phil 	u_int			iv_scanvalid;	/* scan cache valid threshold */
    433  1.33.2.1     phil 	u_int			iv_scanreq_duration;
    434  1.33.2.1     phil 	u_int			iv_scanreq_mindwell;
    435  1.33.2.1     phil 	u_int			iv_scanreq_maxdwell;
    436  1.33.2.1     phil 	uint16_t		iv_scanreq_flags;/* held scan request params */
    437  1.33.2.1     phil 	uint8_t			iv_scanreq_nssid;
    438  1.33.2.1     phil 	struct ieee80211_scan_ssid iv_scanreq_ssid[IEEE80211_SCAN_MAX_SSID];
    439  1.33.2.1     phil 	/* sta-mode roaming state */
    440  1.33.2.1     phil 	enum ieee80211_roamingmode iv_roaming;	/* roaming mode */
    441  1.33.2.1     phil 	struct ieee80211_roamparam iv_roamparms[IEEE80211_MODE_MAX];
    442  1.33.2.1     phil 
    443  1.33.2.1     phil 	uint8_t			iv_bmissthreshold;
    444  1.33.2.1     phil 	uint8_t			iv_bmiss_count;	/* current beacon miss count */
    445  1.33.2.1     phil 	int			iv_bmiss_max;	/* max bmiss before scan */
    446  1.33.2.1     phil 	uint16_t		iv_swbmiss_count;/* beacons in last period */
    447  1.33.2.1     phil 	uint16_t		iv_swbmiss_period;/* s/w bmiss period */
    448  1.33.2.1     phil 	struct callout		iv_swbmiss;	/* s/w beacon miss timer */
    449  1.33.2.1     phil 
    450  1.33.2.1     phil 	int			iv_ampdu_rxmax;	/* A-MPDU rx limit (bytes) */
    451  1.33.2.1     phil 	int			iv_ampdu_density;/* A-MPDU density */
    452  1.33.2.1     phil 	int			iv_ampdu_limit;	/* A-MPDU tx limit (bytes) */
    453  1.33.2.1     phil 	int			iv_amsdu_limit;	/* A-MSDU tx limit (bytes) */
    454  1.33.2.1     phil 	u_int			iv_ampdu_mintraffic[WME_NUM_AC];
    455  1.33.2.1     phil 
    456  1.33.2.1     phil 	struct ieee80211_beacon_offsets iv_bcn_off;
    457  1.33.2.1     phil 	uint32_t		*iv_aid_bitmap;	/* association id map */
    458  1.33.2.1     phil 	uint16_t		iv_max_aid;
    459  1.33.2.1     phil 	uint16_t		iv_sta_assoc;	/* stations associated */
    460  1.33.2.1     phil 	uint16_t		iv_ps_sta;	/* stations in power save */
    461  1.33.2.1     phil 	uint16_t		iv_ps_pending;	/* ps sta's w/ pending frames */
    462  1.33.2.1     phil 	uint16_t		iv_txseq;	/* mcast xmit seq# space */
    463  1.33.2.1     phil 	uint16_t		iv_tim_len;	/* ic_tim_bitmap size (bytes) */
    464  1.33.2.1     phil 	uint8_t			*iv_tim_bitmap;	/* power-save stations w/ data*/
    465  1.33.2.1     phil 	uint8_t			iv_dtim_period;	/* DTIM period */
    466  1.33.2.1     phil 	uint8_t			iv_dtim_count;	/* DTIM count from last bcn */
    467  1.33.2.1     phil 						/* set/unset aid pwrsav state */
    468  1.33.2.1     phil 	uint8_t			iv_quiet;	/* Quiet Element */
    469  1.33.2.1     phil 	uint8_t			iv_quiet_count;	/* constant count for Quiet Element */
    470  1.33.2.1     phil 	uint8_t			iv_quiet_count_value;	/* variable count for Quiet Element */
    471  1.33.2.1     phil 	uint8_t			iv_quiet_period;	/* period for Quiet Element */
    472  1.33.2.1     phil 	uint16_t		iv_quiet_duration;	/* duration for Quiet Element */
    473  1.33.2.1     phil 	uint16_t		iv_quiet_offset;	/* offset for Quiet Element */
    474  1.33.2.1     phil 	int			iv_csa_count;	/* count for doing CSA */
    475  1.33.2.1     phil 
    476  1.33.2.1     phil 	struct ieee80211_node	*iv_bss;	/* information for this node */
    477  1.33.2.1     phil 	struct ieee80211_txparam iv_txparms[IEEE80211_MODE_MAX];
    478  1.33.2.1     phil 	uint16_t		iv_rtsthreshold;
    479  1.33.2.1     phil 	uint16_t		iv_fragthreshold;
    480  1.33.2.1     phil 	int			iv_inact_timer;	/* inactivity timer wait */
    481  1.33.2.1     phil 	/* application-specified IE's to attach to mgt frames */
    482  1.33.2.1     phil 	struct ieee80211_appie	*iv_appie_beacon;
    483  1.33.2.1     phil 	struct ieee80211_appie	*iv_appie_probereq;
    484  1.33.2.1     phil 	struct ieee80211_appie	*iv_appie_proberesp;
    485  1.33.2.1     phil 	struct ieee80211_appie	*iv_appie_assocreq;
    486  1.33.2.1     phil 	struct ieee80211_appie	*iv_appie_assocresp;
    487  1.33.2.1     phil 	struct ieee80211_appie	*iv_appie_wpa;
    488  1.33.2.1     phil 	uint8_t			*iv_wpa_ie;
    489  1.33.2.1     phil 	uint8_t			*iv_rsn_ie;
    490  1.33.2.1     phil 
    491  1.33.2.1     phil 	/* Key management */
    492  1.33.2.1     phil 	uint16_t		iv_max_keyix;	/* max h/w key index */
    493  1.33.2.1     phil 	ieee80211_keyix		iv_def_txkey;	/* default/group tx key index */
    494  1.33.2.1     phil 	struct ieee80211_key	iv_nw_keys[IEEE80211_WEP_NKID];
    495  1.33.2.1     phil 	int			(*iv_key_alloc)(struct ieee80211vap *,
    496  1.33.2.1     phil 				    struct ieee80211_key *,
    497  1.33.2.1     phil 				    ieee80211_keyix *, ieee80211_keyix *);
    498  1.33.2.1     phil 	int			(*iv_key_delete)(struct ieee80211vap *,
    499  1.33.2.1     phil 				    const struct ieee80211_key *);
    500  1.33.2.1     phil 	int			(*iv_key_set)(struct ieee80211vap *,
    501  1.33.2.1     phil 				    const struct ieee80211_key *);
    502  1.33.2.1     phil 	void			(*iv_key_update_begin)(struct ieee80211vap *);
    503  1.33.2.1     phil 	void			(*iv_key_update_end)(struct ieee80211vap *);
    504  1.33.2.1     phil 	void			(*iv_update_deftxkey)(struct ieee80211vap *,
    505  1.33.2.1     phil 				    ieee80211_keyix deftxkey);
    506  1.33.2.1     phil 
    507  1.33.2.1     phil 	const struct ieee80211_authenticator *iv_auth; /* authenticator glue */
    508  1.33.2.1     phil 	void			*iv_ec;		/* private auth state */
    509  1.33.2.1     phil 
    510  1.33.2.1     phil 	const struct ieee80211_aclator *iv_acl;	/* acl glue */
    511  1.33.2.1     phil 	void			*iv_as;		/* private aclator state */
    512  1.33.2.1     phil 
    513  1.33.2.1     phil 	const struct ieee80211_ratectl *iv_rate;
    514  1.33.2.1     phil 	void			*iv_rs;		/* private ratectl state */
    515  1.33.2.1     phil 
    516  1.33.2.1     phil 	struct ieee80211_tdma_state *iv_tdma;	/* tdma state */
    517  1.33.2.1     phil 	struct ieee80211_mesh_state *iv_mesh;	/* MBSS state */
    518  1.33.2.1     phil 	struct ieee80211_hwmp_state *iv_hwmp;	/* HWMP state */
    519  1.33.2.1     phil 
    520  1.33.2.1     phil 	/* operate-mode detach hook */
    521  1.33.2.1     phil 	void			(*iv_opdetach)(struct ieee80211vap *);
    522  1.33.2.1     phil 	/* receive processing */
    523  1.33.2.1     phil 	int			(*iv_input)(struct ieee80211_node *,
    524  1.33.2.1     phil 				    struct mbuf *,
    525  1.33.2.1     phil 				    const struct ieee80211_rx_stats *,
    526  1.33.2.1     phil 				    int, int);
    527  1.33.2.1     phil 	void			(*iv_recv_mgmt)(struct ieee80211_node *,
    528  1.33.2.1     phil 				    struct mbuf *, int,
    529  1.33.2.1     phil 				    const struct ieee80211_rx_stats *,
    530  1.33.2.1     phil 				    int, int);
    531  1.33.2.1     phil 	void			(*iv_recv_ctl)(struct ieee80211_node *,
    532  1.33.2.1     phil 				    struct mbuf *, int);
    533  1.33.2.1     phil 	void			(*iv_deliver_data)(struct ieee80211vap *,
    534  1.33.2.1     phil 				    struct ieee80211_node *, struct mbuf *);
    535  1.33.2.1     phil #if 0
    536  1.33.2.1     phil 	/* send processing */
    537  1.33.2.1     phil 	int			(*iv_send_mgmt)(struct ieee80211_node *,
    538  1.33.2.1     phil 				     int, int);
    539  1.33.2.1     phil #endif
    540  1.33.2.1     phil 	/* beacon miss processing */
    541  1.33.2.1     phil 	void			(*iv_bmiss)(struct ieee80211vap *);
    542  1.33.2.1     phil 	/* reset device state after 802.11 parameter/state change */
    543  1.33.2.1     phil 	int			(*iv_reset)(struct ieee80211vap *, u_long);
    544  1.33.2.1     phil 	/* [schedule] beacon frame update */
    545  1.33.2.1     phil 	void			(*iv_update_beacon)(struct ieee80211vap *, int);
    546  1.33.2.1     phil 	/* power save handling */
    547  1.33.2.1     phil 	void			(*iv_update_ps)(struct ieee80211vap *, int);
    548  1.33.2.1     phil 	int			(*iv_set_tim)(struct ieee80211_node *, int);
    549  1.33.2.1     phil 	void			(*iv_node_ps)(struct ieee80211_node *, int);
    550  1.33.2.1     phil 	void			(*iv_sta_ps)(struct ieee80211vap *, int);
    551  1.33.2.1     phil 	void			(*iv_recv_pspoll)(struct ieee80211_node *,
    552  1.33.2.1     phil 				    struct mbuf *);
    553       1.8   dyoung 
    554  1.33.2.1     phil 	/* state machine processing */
    555  1.33.2.1     phil 	int			(*iv_newstate)(struct ieee80211vap *,
    556  1.33.2.1     phil 				    enum ieee80211_state, int);
    557  1.33.2.1     phil 	/* 802.3 output method for raw frame xmit */
    558  1.33.2.1     phil 	int			(*iv_output)(struct ifnet *, struct mbuf *,
    559  1.33.2.1     phil 				    const struct sockaddr *, struct route *);
    560  1.33.2.1     phil 
    561  1.33.2.1     phil 	int			(*iv_wme_update)(struct ieee80211vap *,
    562  1.33.2.1     phil 				    const struct wmeParams *wme_params);
    563  1.33.2.1     phil 	struct task		iv_wme_task;	/* deferred VAP WME update */
    564  1.33.2.1     phil 
    565  1.33.2.1     phil 	uint64_t		iv_spare[6];
    566  1.33.2.1     phil };
    567  1.33.2.1     phil MALLOC_DECLARE(M_80211_VAP);
    568       1.8   dyoung 
    569       1.1   dyoung #define	IEEE80211_ADDR_EQ(a1,a2)	(memcmp(a1,a2,IEEE80211_ADDR_LEN) == 0)
    570       1.1   dyoung #define	IEEE80211_ADDR_COPY(dst,src)	memcpy(dst,src,IEEE80211_ADDR_LEN)
    571       1.1   dyoung 
    572  1.33.2.1     phil /* ic_flags/iv_flags */
    573  1.33.2.1     phil #define	IEEE80211_F_TURBOP	0x00000001	/* CONF: ATH Turbo enabled*/
    574  1.33.2.1     phil #define	IEEE80211_F_COMP	0x00000002	/* CONF: ATH comp enabled */
    575  1.33.2.1     phil #define	IEEE80211_F_FF		0x00000004	/* CONF: ATH FF enabled */
    576  1.33.2.1     phil #define	IEEE80211_F_BURST	0x00000008	/* CONF: bursting enabled */
    577      1.19   dyoung /* NB: this is intentionally setup to be IEEE80211_CAPINFO_PRIVACY */
    578      1.19   dyoung #define	IEEE80211_F_PRIVACY	0x00000010	/* CONF: privacy enabled */
    579      1.20   dyoung #define	IEEE80211_F_PUREG	0x00000020	/* CONF: 11g w/o 11b sta's */
    580      1.19   dyoung #define	IEEE80211_F_SCAN	0x00000080	/* STATUS: scanning */
    581  1.33.2.1     phil /* 0x00000300 reserved */
    582      1.19   dyoung /* NB: this is intentionally setup to be IEEE80211_CAPINFO_SHORT_SLOTTIME */
    583      1.19   dyoung #define	IEEE80211_F_SHSLOT	0x00000400	/* STATUS: use short slot time*/
    584      1.19   dyoung #define	IEEE80211_F_PMGTON	0x00000800	/* CONF: Power mgmt enable */
    585      1.19   dyoung #define	IEEE80211_F_DESBSSID	0x00001000	/* CONF: des_bssid is set */
    586      1.19   dyoung #define	IEEE80211_F_WME		0x00002000	/* CONF: enable WME use */
    587      1.21    skrll #define	IEEE80211_F_BGSCAN	0x00004000	/* CONF: bg scan enabled (???)*/
    588      1.19   dyoung #define	IEEE80211_F_SWRETRY	0x00008000	/* CONF: sw tx retry enabled */
    589  1.33.2.1     phil /* 0x00030000 reserved */
    590      1.19   dyoung #define	IEEE80211_F_SHPREAMBLE	0x00040000	/* STATUS: use short preamble */
    591      1.19   dyoung #define	IEEE80211_F_DATAPAD	0x00080000	/* CONF: do alignment pad */
    592       1.6   dyoung #define	IEEE80211_F_USEPROT	0x00100000	/* STATUS: protection enabled */
    593       1.6   dyoung #define	IEEE80211_F_USEBARKER	0x00200000	/* STATUS: use barker preamble*/
    594  1.33.2.1     phil #define	IEEE80211_F_CSAPENDING	0x00400000	/* STATUS: chan switch pending*/
    595      1.19   dyoung #define	IEEE80211_F_WPA1	0x00800000	/* CONF: WPA enabled */
    596      1.19   dyoung #define	IEEE80211_F_WPA2	0x01000000	/* CONF: WPA2 enabled */
    597      1.19   dyoung #define	IEEE80211_F_WPA		0x01800000	/* CONF: WPA/WPA2 enabled */
    598      1.19   dyoung #define	IEEE80211_F_DROPUNENC	0x02000000	/* CONF: drop unencrypted */
    599      1.19   dyoung #define	IEEE80211_F_COUNTERM	0x04000000	/* CONF: TKIP countermeasures */
    600      1.19   dyoung #define	IEEE80211_F_HIDESSID	0x08000000	/* CONF: hide SSID in beacon */
    601      1.19   dyoung #define	IEEE80211_F_NOBRIDGE	0x10000000	/* CONF: dis. internal bridge */
    602  1.33.2.1     phil #define	IEEE80211_F_PCF		0x20000000	/* CONF: PCF enabled */
    603  1.33.2.1     phil #define	IEEE80211_F_DOTH	0x40000000	/* CONF: 11h enabled */
    604  1.33.2.1     phil #define	IEEE80211_F_DWDS	0x80000000	/* CONF: Dynamic WDS enabled */
    605  1.33.2.1     phil 
    606  1.33.2.1     phil #define	IEEE80211_F_BITS \
    607  1.33.2.1     phil 	"\20\1TURBOP\2COMP\3FF\4BURST\5PRIVACY\6PUREG\10SCAN" \
    608  1.33.2.1     phil 	"\13SHSLOT\14PMGTON\15DESBSSID\16WME\17BGSCAN\20SWRETRY" \
    609  1.33.2.1     phil 	"\23SHPREAMBLE\24DATAPAD\25USEPROT\26USERBARKER\27CSAPENDING" \
    610  1.33.2.1     phil 	"\30WPA1\31WPA2\32DROPUNENC\33COUNTERM\34HIDESSID\35NOBRIDG\36PCF" \
    611  1.33.2.1     phil 	"\37DOTH\40DWDS"
    612  1.33.2.1     phil 
    613  1.33.2.1     phil /* Atheros protocol-specific flags */
    614  1.33.2.1     phil #define	IEEE80211_F_ATHEROS \
    615  1.33.2.1     phil 	(IEEE80211_F_FF | IEEE80211_F_COMP | IEEE80211_F_TURBOP)
    616  1.33.2.1     phil /* Check if an Atheros capability was negotiated for use */
    617  1.33.2.1     phil #define	IEEE80211_ATH_CAP(vap, ni, bit) \
    618  1.33.2.1     phil 	((vap)->iv_flags & (ni)->ni_ath_flags & (bit))
    619  1.33.2.1     phil 
    620  1.33.2.1     phil /* ic_flags_ext/iv_flags_ext */
    621  1.33.2.1     phil #define	IEEE80211_FEXT_INACT	 0x00000002	/* CONF: sta inact handling */
    622  1.33.2.1     phil #define	IEEE80211_FEXT_SCANWAIT	 0x00000004	/* STATUS: awaiting scan */
    623      1.21    skrll /* 0x00000006 reserved */
    624  1.33.2.1     phil #define	IEEE80211_FEXT_BGSCAN	 0x00000008	/* STATUS: complete bgscan */
    625  1.33.2.1     phil #define	IEEE80211_FEXT_WPS	 0x00000010	/* CONF: WPS enabled */
    626  1.33.2.1     phil #define	IEEE80211_FEXT_TSN 	 0x00000020	/* CONF: TSN enabled */
    627  1.33.2.1     phil #define	IEEE80211_FEXT_SCANREQ	 0x00000040	/* STATUS: scan req params */
    628  1.33.2.1     phil #define	IEEE80211_FEXT_RESUME	 0x00000080	/* STATUS: start on resume */
    629  1.33.2.1     phil #define	IEEE80211_FEXT_4ADDR	 0x00000100	/* CONF: apply 4-addr encap */
    630  1.33.2.1     phil #define	IEEE80211_FEXT_NONERP_PR 0x00000200	/* STATUS: non-ERP sta present*/
    631  1.33.2.1     phil #define	IEEE80211_FEXT_SWBMISS	 0x00000400	/* CONF: do bmiss in s/w */
    632  1.33.2.1     phil #define	IEEE80211_FEXT_DFS	 0x00000800	/* CONF: DFS enabled */
    633  1.33.2.1     phil #define	IEEE80211_FEXT_DOTD	 0x00001000	/* CONF: 11d enabled */
    634  1.33.2.1     phil #define	IEEE80211_FEXT_STATEWAIT 0x00002000	/* STATUS: awaiting state chg */
    635  1.33.2.1     phil #define	IEEE80211_FEXT_REINIT	 0x00004000	/* STATUS: INIT state first */
    636  1.33.2.1     phil #define	IEEE80211_FEXT_BPF	 0x00008000	/* STATUS: BPF tap present */
    637  1.33.2.1     phil /* NB: immutable: should be set only when creating a vap */
    638  1.33.2.1     phil #define	IEEE80211_FEXT_WDSLEGACY 0x00010000	/* CONF: legacy WDS operation */
    639      1.25    tacha #define	IEEE80211_FEXT_PROBECHAN 0x00020000	/* CONF: probe passive channel*/
    640  1.33.2.1     phil #define	IEEE80211_FEXT_UNIQMAC	 0x00040000	/* CONF: user or computed mac */
    641  1.33.2.1     phil #define	IEEE80211_FEXT_SCAN_OFFLOAD	0x00080000	/* CONF: scan is fully offloaded */
    642  1.33.2.1     phil #define	IEEE80211_FEXT_SEQNO_OFFLOAD	0x00100000	/* CONF: driver does seqno insertion/allocation */
    643  1.33.2.1     phil #define	IEEE80211_FEXT_FRAG_OFFLOAD	0x00200000	/* CONF: hardware does 802.11 fragmentation + assignment */
    644  1.33.2.1     phil #define	IEEE80211_FEXT_VHT	0x00400000	/* CONF: VHT support */
    645  1.33.2.1     phil #define	IEEE80211_FEXT_QUIET_IE	0x00800000	/* STATUS: quiet IE in a beacon has been added */
    646  1.33.2.1     phil 
    647  1.33.2.1     phil #define	IEEE80211_FEXT_BITS \
    648  1.33.2.1     phil 	"\20\2INACT\3SCANWAIT\4BGSCAN\5WPS\6TSN\7SCANREQ\10RESUME" \
    649  1.33.2.1     phil 	"\0114ADDR\12NONEPR_PR\13SWBMISS\14DFS\15DOTD\16STATEWAIT\17REINIT" \
    650  1.33.2.1     phil 	"\20BPF\21WDSLEGACY\22PROBECHAN\23UNIQMAC\24SCAN_OFFLOAD\25SEQNO_OFFLOAD" \
    651  1.33.2.1     phil 	"\26VHT\27QUIET_IE"
    652  1.33.2.1     phil 
    653  1.33.2.1     phil /* ic_flags_ht/iv_flags_ht */
    654  1.33.2.1     phil #define	IEEE80211_FHT_NONHT_PR	 0x00000001	/* STATUS: non-HT sta present */
    655  1.33.2.1     phil #define	IEEE80211_FHT_LDPC_TX	 0x00010000	/* CONF: LDPC tx enabled */
    656  1.33.2.1     phil #define	IEEE80211_FHT_LDPC_RX	 0x00020000	/* CONF: LDPC rx enabled */
    657  1.33.2.1     phil #define	IEEE80211_FHT_GF  	 0x00040000	/* CONF: Greenfield enabled */
    658  1.33.2.1     phil #define	IEEE80211_FHT_HT	 0x00080000	/* CONF: HT supported */
    659  1.33.2.1     phil #define	IEEE80211_FHT_AMPDU_TX	 0x00100000	/* CONF: A-MPDU tx supported */
    660  1.33.2.1     phil #define	IEEE80211_FHT_AMPDU_RX	 0x00200000	/* CONF: A-MPDU rx supported */
    661  1.33.2.1     phil #define	IEEE80211_FHT_AMSDU_TX	 0x00400000	/* CONF: A-MSDU tx supported */
    662  1.33.2.1     phil #define	IEEE80211_FHT_AMSDU_RX	 0x00800000	/* CONF: A-MSDU rx supported */
    663  1.33.2.1     phil #define	IEEE80211_FHT_USEHT40	 0x01000000	/* CONF: 20/40 use enabled */
    664  1.33.2.1     phil #define	IEEE80211_FHT_PUREN	 0x02000000	/* CONF: 11n w/o legacy sta's */
    665  1.33.2.1     phil #define	IEEE80211_FHT_SHORTGI20	 0x04000000	/* CONF: short GI in HT20 */
    666  1.33.2.1     phil #define	IEEE80211_FHT_SHORTGI40	 0x08000000	/* CONF: short GI in HT40 */
    667  1.33.2.1     phil #define	IEEE80211_FHT_HTCOMPAT 	 0x10000000	/* CONF: HT vendor OUI's */
    668  1.33.2.1     phil #define	IEEE80211_FHT_RIFS  	 0x20000000	/* CONF: RIFS enabled */
    669  1.33.2.1     phil #define	IEEE80211_FHT_STBC_TX 	 0x40000000	/* CONF: STBC tx enabled */
    670  1.33.2.1     phil #define	IEEE80211_FHT_STBC_RX 	 0x80000000	/* CONF: STBC rx enabled */
    671  1.33.2.1     phil 
    672  1.33.2.1     phil #define	IEEE80211_FHT_BITS \
    673  1.33.2.1     phil 	"\20\1NONHT_PR" \
    674  1.33.2.1     phil 	"\23GF\24HT\25AMPDU_TX\26AMPDU_TX" \
    675  1.33.2.1     phil 	"\27AMSDU_TX\30AMSDU_RX\31USEHT40\32PUREN\33SHORTGI20\34SHORTGI40" \
    676  1.33.2.1     phil 	"\35HTCOMPAT\36RIFS\37STBC_TX\40STBC_RX"
    677  1.33.2.1     phil 
    678  1.33.2.1     phil #define	IEEE80211_FVEN_BITS	"\20"
    679  1.33.2.1     phil 
    680  1.33.2.1     phil #define	IEEE80211_FVHT_VHT	0x000000001	/* CONF: VHT supported */
    681  1.33.2.1     phil #define	IEEE80211_FVHT_USEVHT40	0x000000002	/* CONF: Use VHT40 */
    682  1.33.2.1     phil #define	IEEE80211_FVHT_USEVHT80	0x000000004	/* CONF: Use VHT80 */
    683  1.33.2.1     phil #define	IEEE80211_FVHT_USEVHT80P80	0x000000008	/* CONF: Use VHT 80+80 */
    684  1.33.2.1     phil #define	IEEE80211_FVHT_USEVHT160	0x000000010	/* CONF: Use VHT160 */
    685  1.33.2.1     phil #define	IEEE80211_VFHT_BITS \
    686  1.33.2.1     phil 	"\20\1VHT\2VHT40\3VHT80\4VHT80P80\5VHT160"
    687      1.21    skrll 
    688  1.33.2.1     phil int	ic_printf(struct ieee80211com *, const char *, ...) __printflike(2, 3);
    689      1.19   dyoung void	ieee80211_ifattach(struct ieee80211com *);
    690      1.19   dyoung void	ieee80211_ifdetach(struct ieee80211com *);
    691  1.33.2.1     phil int	ieee80211_vap_setup(struct ieee80211com *, struct ieee80211vap *,
    692  1.33.2.1     phil 		const char name[IFNAMSIZ], int unit,
    693  1.33.2.1     phil 		enum ieee80211_opmode opmode, int flags,
    694  1.33.2.1     phil 		const uint8_t bssid[IEEE80211_ADDR_LEN]);
    695  1.33.2.1     phil int	ieee80211_vap_attach(struct ieee80211vap *,
    696  1.33.2.1     phil 		ifm_change_cb_t, ifm_stat_cb_t,
    697  1.33.2.1     phil 		const uint8_t macaddr[IEEE80211_ADDR_LEN]);
    698  1.33.2.1     phil void	ieee80211_vap_detach(struct ieee80211vap *);
    699  1.33.2.1     phil const struct ieee80211_rateset *ieee80211_get_suprates(struct ieee80211com *ic,
    700  1.33.2.1     phil 		const struct ieee80211_channel *);
    701  1.33.2.1     phil const struct ieee80211_htrateset *ieee80211_get_suphtrates(
    702  1.33.2.1     phil 		struct ieee80211com *, const struct ieee80211_channel *);
    703      1.19   dyoung void	ieee80211_announce(struct ieee80211com *);
    704  1.33.2.1     phil void	ieee80211_announce_channels(struct ieee80211com *);
    705  1.33.2.1     phil void	ieee80211_drain(struct ieee80211com *);
    706  1.33.2.1     phil void	ieee80211_chan_init(struct ieee80211com *);
    707  1.33.2.1     phil struct ieee80211com *ieee80211_find_vap(const uint8_t mac[IEEE80211_ADDR_LEN]);
    708  1.33.2.1     phil struct ieee80211com *ieee80211_find_com(const char *name);
    709  1.33.2.1     phil typedef void ieee80211_com_iter_func(void *, struct ieee80211com *);
    710  1.33.2.1     phil void	ieee80211_iterate_coms(ieee80211_com_iter_func *, void *);
    711       1.1   dyoung int	ieee80211_media_change(struct ifnet *);
    712       1.1   dyoung void	ieee80211_media_status(struct ifnet *, struct ifmediareq *);
    713  1.33.2.1     phil int	ieee80211_ioctl(struct ifnet *, u_long, caddr_t);
    714       1.1   dyoung int	ieee80211_rate2media(struct ieee80211com *, int,
    715       1.1   dyoung 		enum ieee80211_phymode);
    716       1.1   dyoung int	ieee80211_media2rate(int);
    717  1.33.2.1     phil int	ieee80211_mhz2ieee(u_int, u_int);
    718  1.33.2.1     phil int	ieee80211_chan2ieee(struct ieee80211com *,
    719  1.33.2.1     phil 		const struct ieee80211_channel *);
    720       1.1   dyoung u_int	ieee80211_ieee2mhz(u_int, u_int);
    721  1.33.2.1     phil int	ieee80211_add_channel(struct ieee80211_channel[], int, int *,
    722  1.33.2.1     phil 	    uint8_t, uint16_t, int8_t, uint32_t, const uint8_t[]);
    723  1.33.2.1     phil int	ieee80211_add_channel_ht40(struct ieee80211_channel[], int, int *,
    724  1.33.2.1     phil 	    uint8_t, int8_t, uint32_t);
    725  1.33.2.1     phil uint32_t ieee80211_get_channel_center_freq(const struct ieee80211_channel *);
    726  1.33.2.1     phil uint32_t ieee80211_get_channel_center_freq1(const struct ieee80211_channel *);
    727  1.33.2.1     phil uint32_t ieee80211_get_channel_center_freq2(const struct ieee80211_channel *);
    728  1.33.2.1     phil int	ieee80211_add_channel_list_2ghz(struct ieee80211_channel[], int, int *,
    729  1.33.2.1     phil 	    const uint8_t[], int, const uint8_t[], int);
    730  1.33.2.1     phil int	ieee80211_add_channel_list_5ghz(struct ieee80211_channel[], int, int *,
    731  1.33.2.1     phil 	    const uint8_t[], int, const uint8_t[], int);
    732  1.33.2.1     phil struct ieee80211_channel *ieee80211_find_channel(struct ieee80211com *,
    733  1.33.2.1     phil 		int freq, int flags);
    734  1.33.2.1     phil struct ieee80211_channel *ieee80211_find_channel_byieee(struct ieee80211com *,
    735  1.33.2.1     phil 		int ieee, int flags);
    736  1.33.2.1     phil struct ieee80211_channel *ieee80211_lookup_channel_rxstatus(struct ieee80211vap *,
    737  1.33.2.1     phil 		const struct ieee80211_rx_stats *);
    738       1.1   dyoung int	ieee80211_setmode(struct ieee80211com *, enum ieee80211_phymode);
    739  1.33.2.1     phil enum ieee80211_phymode ieee80211_chan2mode(const struct ieee80211_channel *);
    740  1.33.2.1     phil uint32_t ieee80211_mac_hash(const struct ieee80211com *,
    741  1.33.2.1     phil 		const uint8_t addr[IEEE80211_ADDR_LEN]);
    742  1.33.2.1     phil char	ieee80211_channel_type_char(const struct ieee80211_channel *c);
    743  1.33.2.1     phil 
    744  1.33.2.1     phil #define	ieee80211_get_current_channel(_ic)	((_ic)->ic_curchan)
    745  1.33.2.1     phil #define	ieee80211_get_home_channel(_ic)		((_ic)->ic_bsschan)
    746  1.33.2.1     phil #define	ieee80211_get_vap_desired_channel(_iv)	((_iv)->iv_des_chan)
    747  1.33.2.1     phil 
    748  1.33.2.1     phil void	ieee80211_radiotap_attach(struct ieee80211com *,
    749  1.33.2.1     phil 	    struct ieee80211_radiotap_header *th, int tlen,
    750  1.33.2.1     phil 		uint32_t tx_radiotap,
    751  1.33.2.1     phil 	    struct ieee80211_radiotap_header *rh, int rlen,
    752  1.33.2.1     phil 		uint32_t rx_radiotap);
    753  1.33.2.1     phil void	ieee80211_radiotap_attachv(struct ieee80211com *,
    754  1.33.2.1     phil 	    struct ieee80211_radiotap_header *th,
    755  1.33.2.1     phil 	    int tlen, int n_tx_v, uint32_t tx_radiotap,
    756  1.33.2.1     phil 	    struct ieee80211_radiotap_header *rh,
    757  1.33.2.1     phil 	    int rlen, int n_rx_v, uint32_t rx_radiotap);
    758  1.33.2.1     phil void	ieee80211_radiotap_detach(struct ieee80211com *);
    759  1.33.2.1     phil void	ieee80211_radiotap_vattach(struct ieee80211vap *);
    760  1.33.2.1     phil void	ieee80211_radiotap_vdetach(struct ieee80211vap *);
    761  1.33.2.1     phil void	ieee80211_radiotap_chan_change(struct ieee80211com *);
    762  1.33.2.1     phil void	ieee80211_radiotap_tx(struct ieee80211vap *, struct mbuf *);
    763  1.33.2.1     phil void	ieee80211_radiotap_rx(struct ieee80211vap *, struct mbuf *);
    764  1.33.2.1     phil void	ieee80211_radiotap_rx_all(struct ieee80211com *, struct mbuf *);
    765  1.33.2.1     phil 
    766  1.33.2.1     phil static __inline int
    767  1.33.2.1     phil ieee80211_radiotap_active(const struct ieee80211com *ic)
    768  1.33.2.1     phil {
    769  1.33.2.1     phil 	return (ic->ic_flags_ext & IEEE80211_FEXT_BPF) != 0;
    770  1.33.2.1     phil }
    771  1.33.2.1     phil 
    772  1.33.2.1     phil static __inline int
    773  1.33.2.1     phil ieee80211_radiotap_active_vap(const struct ieee80211vap *vap)
    774  1.33.2.1     phil {
    775  1.33.2.1     phil 	return (vap->iv_flags_ext & IEEE80211_FEXT_BPF) ||
    776  1.33.2.1     phil 	    vap->iv_ic->ic_montaps != 0;
    777  1.33.2.1     phil }
    778  1.33.2.1     phil 
    779  1.33.2.1     phil /*
    780  1.33.2.1     phil  * Enqueue a task on the state thread.
    781  1.33.2.1     phil  */
    782  1.33.2.1     phil static __inline void
    783  1.33.2.1     phil ieee80211_runtask(struct ieee80211com *ic, struct task *task)
    784  1.33.2.1     phil {
    785  1.33.2.1     phil 	taskqueue_enqueue(ic->ic_tq, task);
    786  1.33.2.1     phil }
    787  1.33.2.1     phil 
    788  1.33.2.1     phil /*
    789  1.33.2.1     phil  * Wait for a queued task to complete.
    790  1.33.2.1     phil  */
    791  1.33.2.1     phil static __inline void
    792  1.33.2.1     phil ieee80211_draintask(struct ieee80211com *ic, struct task *task)
    793  1.33.2.1     phil {
    794  1.33.2.1     phil 	taskqueue_drain(ic->ic_tq, task);
    795  1.33.2.1     phil }
    796      1.19   dyoung 
    797      1.19   dyoung /*
    798      1.19   dyoung  * Key update synchronization methods.  XXX should not be visible.
    799      1.19   dyoung  */
    800      1.19   dyoung static __inline void
    801  1.33.2.1     phil ieee80211_key_update_begin(struct ieee80211vap *vap)
    802      1.19   dyoung {
    803  1.33.2.1     phil 	vap->iv_key_update_begin(vap);
    804      1.19   dyoung }
    805      1.19   dyoung static __inline void
    806  1.33.2.1     phil ieee80211_key_update_end(struct ieee80211vap *vap)
    807      1.19   dyoung {
    808  1.33.2.1     phil 	vap->iv_key_update_end(vap);
    809      1.19   dyoung }
    810      1.19   dyoung 
    811      1.19   dyoung /*
    812      1.19   dyoung  * XXX these need to be here for IEEE80211_F_DATAPAD
    813      1.19   dyoung  */
    814      1.19   dyoung 
    815      1.19   dyoung /*
    816      1.19   dyoung  * Return the space occupied by the 802.11 header and any
    817      1.19   dyoung  * padding required by the driver.  This works for a
    818      1.19   dyoung  * management or data frame.
    819      1.19   dyoung  */
    820      1.19   dyoung static __inline int
    821      1.19   dyoung ieee80211_hdrspace(struct ieee80211com *ic, const void *data)
    822      1.19   dyoung {
    823      1.19   dyoung 	int size = ieee80211_hdrsize(data);
    824      1.19   dyoung 	if (ic->ic_flags & IEEE80211_F_DATAPAD)
    825  1.33.2.1     phil 		size = roundup(size, sizeof(uint32_t));
    826      1.19   dyoung 	return size;
    827      1.19   dyoung }
    828      1.19   dyoung 
    829      1.19   dyoung /*
    830      1.19   dyoung  * Like ieee80211_hdrspace, but handles any type of frame.
    831      1.19   dyoung  */
    832      1.19   dyoung static __inline int
    833      1.19   dyoung ieee80211_anyhdrspace(struct ieee80211com *ic, const void *data)
    834      1.19   dyoung {
    835      1.19   dyoung 	int size = ieee80211_anyhdrsize(data);
    836      1.19   dyoung 	if (ic->ic_flags & IEEE80211_F_DATAPAD)
    837  1.33.2.1     phil 		size = roundup(size, sizeof(uint32_t));
    838      1.19   dyoung 	return size;
    839      1.19   dyoung }
    840       1.1   dyoung 
    841  1.33.2.1     phil /*
    842  1.33.2.1     phil  * Notify a vap that beacon state has been updated.
    843  1.33.2.1     phil  */
    844  1.33.2.1     phil static __inline void
    845  1.33.2.1     phil ieee80211_beacon_notify(struct ieee80211vap *vap, int what)
    846  1.33.2.1     phil {
    847  1.33.2.1     phil 	if (vap->iv_state == IEEE80211_S_RUN)
    848  1.33.2.1     phil 		vap->iv_update_beacon(vap, what);
    849  1.33.2.1     phil }
    850  1.33.2.1     phil 
    851  1.33.2.1     phil /*
    852  1.33.2.1     phil  * Calculate HT channel promotion flags for a channel.
    853  1.33.2.1     phil  * XXX belongs in ieee80211_ht.h but needs IEEE80211_FHT_*
    854  1.33.2.1     phil  */
    855  1.33.2.1     phil static __inline int
    856  1.33.2.1     phil ieee80211_htchanflags(const struct ieee80211_channel *c)
    857  1.33.2.1     phil {
    858  1.33.2.1     phil 	return IEEE80211_IS_CHAN_HT40(c) ?
    859  1.33.2.1     phil 	    IEEE80211_FHT_HT | IEEE80211_FHT_USEHT40 :
    860  1.33.2.1     phil 	    IEEE80211_IS_CHAN_HT(c) ?  IEEE80211_FHT_HT : 0;
    861  1.33.2.1     phil }
    862  1.33.2.1     phil 
    863  1.33.2.1     phil /*
    864  1.33.2.1     phil  * Calculate VHT channel promotion flags for a channel.
    865  1.33.2.1     phil  * XXX belongs in ieee80211_vht.h but needs IEEE80211_FVHT_*
    866  1.33.2.1     phil  */
    867  1.33.2.1     phil static __inline int
    868  1.33.2.1     phil ieee80211_vhtchanflags(const struct ieee80211_channel *c)
    869  1.33.2.1     phil {
    870  1.33.2.1     phil 
    871  1.33.2.1     phil 	if (IEEE80211_IS_CHAN_VHT160(c))
    872  1.33.2.1     phil 		return IEEE80211_FVHT_USEVHT160;
    873  1.33.2.1     phil 	if (IEEE80211_IS_CHAN_VHT80_80(c))
    874  1.33.2.1     phil 		return IEEE80211_FVHT_USEVHT80P80;
    875  1.33.2.1     phil 	if (IEEE80211_IS_CHAN_VHT80(c))
    876  1.33.2.1     phil 		return IEEE80211_FVHT_USEVHT80;
    877  1.33.2.1     phil 	if (IEEE80211_IS_CHAN_VHT40(c))
    878  1.33.2.1     phil 		return IEEE80211_FVHT_USEVHT40;
    879  1.33.2.1     phil 	if (IEEE80211_IS_CHAN_VHT(c))
    880  1.33.2.1     phil 		return IEEE80211_FVHT_VHT;
    881  1.33.2.1     phil 	return (0);
    882  1.33.2.1     phil }
    883  1.33.2.1     phil 
    884  1.33.2.1     phil /*
    885  1.33.2.1     phil  * Fetch the current TX power (cap) for the given node.
    886  1.33.2.1     phil  *
    887  1.33.2.1     phil  * This includes the node and ic/vap TX power limit as needed,
    888  1.33.2.1     phil  * but it doesn't take into account any per-rate limit.
    889  1.33.2.1     phil  */
    890  1.33.2.1     phil static __inline uint16_t
    891  1.33.2.1     phil ieee80211_get_node_txpower(struct ieee80211_node *ni)
    892  1.33.2.1     phil {
    893  1.33.2.1     phil 	struct ieee80211com *ic = ni->ni_ic;
    894  1.33.2.1     phil 	uint16_t txpower;
    895  1.33.2.1     phil 
    896  1.33.2.1     phil 	txpower = ni->ni_txpower;
    897  1.33.2.1     phil 	txpower = MIN(txpower, ic->ic_txpowlimit);
    898  1.33.2.1     phil 	if (ic->ic_curchan != NULL) {
    899  1.33.2.1     phil 		txpower = MIN(txpower, 2 * ic->ic_curchan->ic_maxregpower);
    900  1.33.2.1     phil 		txpower = MIN(txpower, ic->ic_curchan->ic_maxpower);
    901  1.33.2.1     phil 	}
    902  1.33.2.1     phil 
    903  1.33.2.1     phil 	return (txpower);
    904  1.33.2.1     phil }
    905  1.33.2.1     phil 
    906  1.33.2.1     phil /*
    907  1.33.2.1     phil  * Debugging facilities compiled in when IEEE80211_DEBUG is defined.
    908  1.33.2.1     phil  *
    909  1.33.2.1     phil  * The intent is that any problem in the net80211 layer can be
    910  1.33.2.1     phil  * diagnosed by inspecting the statistics (dumped by the wlanstats
    911  1.33.2.1     phil  * program) and/or the msgs generated by net80211.  Messages are
    912  1.33.2.1     phil  * broken into functional classes and can be controlled with the
    913  1.33.2.1     phil  * wlandebug program.  Certain of these msg groups are for facilities
    914  1.33.2.1     phil  * that are no longer part of net80211 (e.g. IEEE80211_MSG_DOT1XSM).
    915  1.33.2.1     phil  */
    916  1.33.2.1     phil #define	IEEE80211_MSG_11N	0x80000000	/* 11n mode debug */
    917      1.11  mycroft #define	IEEE80211_MSG_DEBUG	0x40000000	/* IFF_DEBUG equivalent */
    918      1.11  mycroft #define	IEEE80211_MSG_DUMPPKTS	0x20000000	/* IFF_LINK2 equivalant */
    919      1.11  mycroft #define	IEEE80211_MSG_CRYPTO	0x10000000	/* crypto work */
    920      1.11  mycroft #define	IEEE80211_MSG_INPUT	0x08000000	/* input handling */
    921      1.11  mycroft #define	IEEE80211_MSG_XRATE	0x04000000	/* rate set handling */
    922      1.11  mycroft #define	IEEE80211_MSG_ELEMID	0x02000000	/* element id parsing */
    923      1.11  mycroft #define	IEEE80211_MSG_NODE	0x01000000	/* node handling */
    924      1.11  mycroft #define	IEEE80211_MSG_ASSOC	0x00800000	/* association handling */
    925      1.11  mycroft #define	IEEE80211_MSG_AUTH	0x00400000	/* authentication handling */
    926      1.11  mycroft #define	IEEE80211_MSG_SCAN	0x00200000	/* scanning */
    927      1.11  mycroft #define	IEEE80211_MSG_OUTPUT	0x00100000	/* output handling */
    928      1.11  mycroft #define	IEEE80211_MSG_STATE	0x00080000	/* state machine */
    929      1.11  mycroft #define	IEEE80211_MSG_POWER	0x00040000	/* power save handling */
    930  1.33.2.1     phil #define	IEEE80211_MSG_HWMP	0x00020000	/* hybrid mesh protocol */
    931      1.11  mycroft #define	IEEE80211_MSG_DOT1XSM	0x00010000	/* 802.1x state machine */
    932      1.11  mycroft #define	IEEE80211_MSG_RADIUS	0x00008000	/* 802.1x radius client */
    933      1.11  mycroft #define	IEEE80211_MSG_RADDUMP	0x00004000	/* dump 802.1x radius packets */
    934  1.33.2.1     phil #define	IEEE80211_MSG_MESH	0x00002000	/* mesh networking */
    935      1.11  mycroft #define	IEEE80211_MSG_WPA	0x00001000	/* WPA/RSN protocol */
    936      1.11  mycroft #define	IEEE80211_MSG_ACL	0x00000800	/* ACL handling */
    937      1.19   dyoung #define	IEEE80211_MSG_WME	0x00000400	/* WME protocol */
    938      1.21    skrll #define	IEEE80211_MSG_SUPERG	0x00000200	/* Atheros SuperG protocol */
    939      1.21    skrll #define	IEEE80211_MSG_DOTH	0x00000100	/* 802.11h support */
    940      1.21    skrll #define	IEEE80211_MSG_INACT	0x00000080	/* inactivity handling */
    941      1.21    skrll #define	IEEE80211_MSG_ROAM	0x00000040	/* sta-mode roaming */
    942  1.33.2.1     phil #define	IEEE80211_MSG_RATECTL	0x00000020	/* tx rate control */
    943  1.33.2.1     phil #define	IEEE80211_MSG_ACTION	0x00000010	/* action frame handling */
    944  1.33.2.1     phil #define	IEEE80211_MSG_WDS	0x00000008	/* WDS handling */
    945  1.33.2.1     phil #define	IEEE80211_MSG_IOCTL	0x00000004	/* ioctl handling */
    946  1.33.2.1     phil #define	IEEE80211_MSG_TDMA	0x00000002	/* TDMA handling */
    947  1.33.2.1     phil 
    948      1.11  mycroft #define	IEEE80211_MSG_ANY	0xffffffff	/* anything */
    949      1.11  mycroft 
    950  1.33.2.1     phil #define	IEEE80211_MSG_BITS \
    951  1.33.2.1     phil 	"\20\2TDMA\3IOCTL\4WDS\5ACTION\6RATECTL\7ROAM\10INACT\11DOTH\12SUPERG" \
    952  1.33.2.1     phil 	"\13WME\14ACL\15WPA\16RADKEYS\17RADDUMP\20RADIUS\21DOT1XSM\22HWMP" \
    953  1.33.2.1     phil 	"\23POWER\24STATE\25OUTPUT\26SCAN\27AUTH\30ASSOC\31NODE\32ELEMID" \
    954  1.33.2.1     phil 	"\33XRATE\34INPUT\35CRYPTO\36DUPMPKTS\37DEBUG\04011N"
    955  1.33.2.1     phil 
    956       1.1   dyoung #ifdef IEEE80211_DEBUG
    957  1.33.2.1     phil #define	ieee80211_msg(_vap, _m)	((_vap)->iv_debug & (_m))
    958  1.33.2.1     phil #define	IEEE80211_DPRINTF(_vap, _m, _fmt, ...) do {			\
    959  1.33.2.1     phil 	if (ieee80211_msg(_vap, _m))					\
    960  1.33.2.1     phil 		ieee80211_note(_vap, _fmt, __VA_ARGS__);		\
    961  1.33.2.1     phil } while (0)
    962  1.33.2.1     phil #define	IEEE80211_NOTE(_vap, _m, _ni, _fmt, ...) do {			\
    963  1.33.2.1     phil 	if (ieee80211_msg(_vap, _m))					\
    964  1.33.2.1     phil 		ieee80211_note_mac(_vap, (_ni)->ni_macaddr, _fmt, __VA_ARGS__);\
    965      1.21    skrll } while (0)
    966  1.33.2.1     phil #define	IEEE80211_NOTE_MAC(_vap, _m, _mac, _fmt, ...) do {		\
    967  1.33.2.1     phil 	if (ieee80211_msg(_vap, _m))					\
    968  1.33.2.1     phil 		ieee80211_note_mac(_vap, _mac, _fmt, __VA_ARGS__);	\
    969      1.21    skrll } while (0)
    970  1.33.2.1     phil #define	IEEE80211_NOTE_FRAME(_vap, _m, _wh, _fmt, ...) do {		\
    971  1.33.2.1     phil 	if (ieee80211_msg(_vap, _m))					\
    972  1.33.2.1     phil 		ieee80211_note_frame(_vap, _wh, _fmt, __VA_ARGS__);	\
    973      1.21    skrll } while (0)
    974  1.33.2.1     phil void	ieee80211_note(const struct ieee80211vap *, const char *, ...);
    975  1.33.2.1     phil void	ieee80211_note_mac(const struct ieee80211vap *,
    976  1.33.2.1     phil 		const uint8_t mac[IEEE80211_ADDR_LEN], const char *, ...);
    977  1.33.2.1     phil void	ieee80211_note_frame(const struct ieee80211vap *,
    978  1.33.2.1     phil 		const struct ieee80211_frame *, const char *, ...);
    979  1.33.2.1     phil #define	ieee80211_msg_debug(_vap) \
    980  1.33.2.1     phil 	((_vap)->iv_debug & IEEE80211_MSG_DEBUG)
    981  1.33.2.1     phil #define	ieee80211_msg_dumppkts(_vap) \
    982  1.33.2.1     phil 	((_vap)->iv_debug & IEEE80211_MSG_DUMPPKTS)
    983  1.33.2.1     phil #define	ieee80211_msg_input(_vap) \
    984  1.33.2.1     phil 	((_vap)->iv_debug & IEEE80211_MSG_INPUT)
    985  1.33.2.1     phil #define	ieee80211_msg_radius(_vap) \
    986  1.33.2.1     phil 	((_vap)->iv_debug & IEEE80211_MSG_RADIUS)
    987  1.33.2.1     phil #define	ieee80211_msg_dumpradius(_vap) \
    988  1.33.2.1     phil 	((_vap)->iv_debug & IEEE80211_MSG_RADDUMP)
    989  1.33.2.1     phil #define	ieee80211_msg_dumpradkeys(_vap) \
    990  1.33.2.1     phil 	((_vap)->iv_debug & IEEE80211_MSG_RADKEYS)
    991  1.33.2.1     phil #define	ieee80211_msg_scan(_vap) \
    992  1.33.2.1     phil 	((_vap)->iv_debug & IEEE80211_MSG_SCAN)
    993  1.33.2.1     phil #define	ieee80211_msg_assoc(_vap) \
    994  1.33.2.1     phil 	((_vap)->iv_debug & IEEE80211_MSG_ASSOC)
    995  1.33.2.1     phil 
    996  1.33.2.1     phil /*
    997  1.33.2.1     phil  * Emit a debug message about discarding a frame or information
    998  1.33.2.1     phil  * element.  One format is for extracting the mac address from
    999  1.33.2.1     phil  * the frame header; the other is for when a header is not
   1000  1.33.2.1     phil  * available or otherwise appropriate.
   1001  1.33.2.1     phil  */
   1002  1.33.2.1     phil #define	IEEE80211_DISCARD(_vap, _m, _wh, _type, _fmt, ...) do {		\
   1003  1.33.2.1     phil 	if ((_vap)->iv_debug & (_m))					\
   1004  1.33.2.1     phil 		ieee80211_discard_frame(_vap, _wh, _type, _fmt, __VA_ARGS__);\
   1005  1.33.2.1     phil } while (0)
   1006  1.33.2.1     phil #define	IEEE80211_DISCARD_IE(_vap, _m, _wh, _type, _fmt, ...) do {	\
   1007  1.33.2.1     phil 	if ((_vap)->iv_debug & (_m))					\
   1008  1.33.2.1     phil 		ieee80211_discard_ie(_vap, _wh, _type, _fmt, __VA_ARGS__);\
   1009  1.33.2.1     phil } while (0)
   1010  1.33.2.1     phil #define	IEEE80211_DISCARD_MAC(_vap, _m, _mac, _type, _fmt, ...) do {	\
   1011  1.33.2.1     phil 	if ((_vap)->iv_debug & (_m))					\
   1012  1.33.2.1     phil 		ieee80211_discard_mac(_vap, _mac, _type, _fmt, __VA_ARGS__);\
   1013  1.33.2.1     phil } while (0)
   1014  1.33.2.1     phil 
   1015  1.33.2.1     phil void ieee80211_discard_frame(const struct ieee80211vap *,
   1016  1.33.2.1     phil 	const struct ieee80211_frame *, const char *type, const char *fmt, ...);
   1017  1.33.2.1     phil void ieee80211_discard_ie(const struct ieee80211vap *,
   1018  1.33.2.1     phil 	const struct ieee80211_frame *, const char *type, const char *fmt, ...);
   1019  1.33.2.1     phil void ieee80211_discard_mac(const struct ieee80211vap *,
   1020  1.33.2.1     phil 	const uint8_t mac[IEEE80211_ADDR_LEN], const char *type,
   1021  1.33.2.1     phil 	const char *fmt, ...);
   1022       1.1   dyoung #else
   1023  1.33.2.1     phil #define	IEEE80211_DPRINTF(_vap, _m, _fmt, ...)
   1024  1.33.2.1     phil #define	IEEE80211_NOTE(_vap, _m, _ni, _fmt, ...)
   1025  1.33.2.1     phil #define	IEEE80211_NOTE_FRAME(_vap, _m, _wh, _fmt, ...)
   1026  1.33.2.1     phil #define	IEEE80211_NOTE_MAC(_vap, _m, _mac, _fmt, ...)
   1027  1.33.2.1     phil #define	ieee80211_msg_dumppkts(_vap)	0
   1028  1.33.2.1     phil #define	ieee80211_msg(_vap, _m)		0
   1029  1.33.2.1     phil 
   1030  1.33.2.1     phil #define	IEEE80211_DISCARD(_vap, _m, _wh, _type, _fmt, ...)
   1031  1.33.2.1     phil #define	IEEE80211_DISCARD_IE(_vap, _m, _wh, _type, _fmt, ...)
   1032  1.33.2.1     phil #define	IEEE80211_DISCARD_MAC(_vap, _m, _mac, _type, _fmt, ...)
   1033       1.1   dyoung #endif
   1034       1.1   dyoung 
   1035  1.33.2.1     phil #endif /* _NET80211_IEEE80211_VAR_H_ */
   1036