ieee80211_var.h revision 1.26.34.1
1 /* $NetBSD: ieee80211_var.h,v 1.26.34.1 2008/02/22 16:50:26 skrll Exp $ */ 2 /*- 3 * Copyright (c) 2001 Atsushi Onoe 4 * Copyright (c) 2002-2007 Sam Leffler, Errno Consulting 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 17 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 19 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 21 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 22 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 23 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 24 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 25 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 26 * 27 * $FreeBSD: src/sys/net80211/ieee80211_var.h,v 1.54 2007/11/23 05:57:20 sam Exp $ 28 */ 29 #ifndef _NET80211_IEEE80211_VAR_H_ 30 #define _NET80211_IEEE80211_VAR_H_ 31 32 /* 33 * Definitions for IEEE 802.11 drivers. 34 */ 35 #define IEEE80211_DEBUG 36 #undef IEEE80211_DEBUG_REFCNT /* node refcnt stuff */ 37 38 /* NB: portability glue must go first */ 39 #ifdef __NetBSD__ 40 #include <net80211/ieee80211_netbsd.h> 41 #elif __FreeBSD__ 42 #include <net80211/ieee80211_freebsd.h> 43 #elif __linux__ 44 #include <net80211/ieee80211_linux.h> 45 #else 46 #error "No support for your operating system!" 47 #endif 48 49 #include <sys/queue.h> /* XXX */ 50 51 #include <net80211/_ieee80211.h> 52 #include <net80211/ieee80211.h> 53 #include <net80211/ieee80211_crypto.h> 54 #include <net80211/ieee80211_ioctl.h> /* for ieee80211_stats */ 55 #include <net80211/ieee80211_node.h> 56 #include <net80211/ieee80211_power.h> 57 #include <net80211/ieee80211_proto.h> 58 #include <net80211/ieee80211_scan.h> 59 60 #define IEEE80211_TXPOWER_MAX 100 /* .5 dbM (XXX units?) */ 61 #define IEEE80211_TXPOWER_MIN 0 /* kill radio */ 62 63 #define IEEE80211_DTIM_DEFAULT 1 /* default DTIM period */ 64 #define IEEE80211_BINTVAL_DEFAULT 100 /* default beacon interval (TU's) */ 65 66 #define IEEE80211_BMISS_MAX 2 /* maximum consecutive bmiss allowed */ 67 #define IEEE80211_HWBMISS_DEFAULT 7 /* h/w bmiss threshold (beacons) */ 68 69 #define IEEE80211_BGSCAN_INTVAL_MIN 15 /* min bg scan intvl (secs) */ 70 #define IEEE80211_BGSCAN_INTVAL_DEFAULT (5*60) /* default bg scan intvl */ 71 72 #define IEEE80211_BGSCAN_IDLE_MIN 100 /* min idle time (ms) */ 73 #define IEEE80211_BGSCAN_IDLE_DEFAULT 250 /* default idle time (ms) */ 74 75 #define IEEE80211_SCAN_VALID_MIN 10 /* min scan valid time (secs) */ 76 #define IEEE80211_SCAN_VALID_DEFAULT 60 /* default scan valid time */ 77 78 #define IEEE80211_PS_SLEEP 0x1 /* STA is in power saving mode */ 79 #define IEEE80211_PS_MAX_QUEUE 50 /* maximum saved packets */ 80 81 #define IEEE80211_FIXED_RATE_NONE -1 82 #define IEEE80211_MCAST_RATE_DEFAULT (2*1) /* default mcast rate (1M) */ 83 84 #define IEEE80211_RTS_DEFAULT IEEE80211_RTS_MAX 85 #define IEEE80211_FRAG_DEFAULT IEEE80211_FRAG_MAX 86 87 #define IEEE80211_MS_TO_TU(x) (((x) * 1000) / 1024) 88 #define IEEE80211_TU_TO_MS(x) (((x) * 1024) / 1000) 89 #define IEEE80211_TU_TO_TICKS(x)(((x) * 1024 * hz) / (1000 * 1000)) 90 91 struct ieee80211_aclator; 92 93 #define IEEE80211_PS_SLEEP 0x1 /* STA is in power saving mode */ 94 95 #define IEEE80211_PS_MAX_QUEUE 50 /* maximum saved packets */ 96 97 struct ieee80211com { 98 SLIST_ENTRY(ieee80211com) ic_next; /* chain of all ieee80211com */ 99 100 struct ifnet *ic_ifp; /* associated device */ 101 ieee80211_com_lock_t ic_comlock; /* state update lock */ 102 ieee80211_beacon_lock_t ic_beaconlock; /* beacon update lock */ 103 struct ieee80211_stats ic_stats; /* statistics */ 104 struct sysctllog *ic_sysctllog; /* for destroying sysctl tree */ 105 uint32_t ic_debug; /* debug msg flags */ 106 int ic_vap; /* virtual AP index */ 107 int ic_headroom; /* driver tx headroom needs */ 108 enum ieee80211_phytype ic_phytype; /* XXX wrong for multi-mode */ 109 enum ieee80211_opmode ic_opmode; /* operation mode */ 110 struct ifmedia ic_media; /* interface media config */ 111 uint8_t ic_myaddr[IEEE80211_ADDR_LEN]; 112 113 uint32_t ic_flags; /* state flags */ 114 uint32_t ic_flags_ext; /* extended state flags */ 115 uint32_t ic_flags_ven; /* vendor state flags */ 116 uint32_t ic_caps; /* capabilities */ 117 uint32_t ic_htcaps; /* HT capabilities */ 118 uint8_t ic_modecaps[2]; /* set of mode capabilities */ 119 uint16_t ic_curmode; /* current mode */ 120 struct ieee80211_rateset ic_sup_rates[IEEE80211_MODE_MAX]; 121 uint16_t ic_bintval; /* beacon interval */ 122 uint16_t ic_lintval; /* listen interval */ 123 uint16_t ic_holdover; /* PM hold over duration */ 124 uint16_t ic_txpowlimit; /* global tx power limit */ 125 int ic_ampdu_rxmax; /* A-MPDU rx limit (bytes) */ 126 int ic_ampdu_density;/* A-MPDU density */ 127 int ic_ampdu_limit; /* A-MPDU tx limit (bytes) */ 128 int ic_amsdu_limit; /* A-MSDU tx limit (bytes) */ 129 130 /* 131 * Channel state: 132 * 133 * ic_channels is the set of available channels for the device; 134 * it is setup by the driver 135 * ic_nchans is the number of valid entries in ic_channels 136 * ic_chan_avail is a bit vector of these channels used to check 137 * whether a channel is available w/o searching the channel table. 138 * ic_chan_active is a (potentially) constrained subset of 139 * ic_chan_avail that reflects any mode setting or user-specified 140 * limit on the set of channels to use/scan 141 * ic_curchan is the current channel the device is set to; it may 142 * be different from ic_bsschan when we are off-channel scanning 143 * or otherwise doing background work 144 * ic_bsschan is the channel selected for operation; it may 145 * be undefined (IEEE80211_CHAN_ANYC) 146 * ic_prevchan is a cached ``previous channel'' used to optimize 147 * lookups when switching back+forth between two channels 148 * (e.g. for dynamic turbo) 149 */ 150 int ic_nchans; /* # entries in ic_channels */ 151 struct ieee80211_channel ic_channels[IEEE80211_CHAN_MAX+1]; 152 uint8_t ic_chan_avail[IEEE80211_CHAN_BYTES]; 153 uint8_t ic_chan_active[IEEE80211_CHAN_BYTES]; 154 uint8_t ic_chan_scan[IEEE80211_CHAN_BYTES]; 155 struct ieee80211_channel *ic_curchan; /* current channel */ 156 struct ieee80211_channel *ic_bsschan; /* bss channel */ 157 struct ieee80211_channel *ic_prevchan; /* previous channel */ 158 int ic_countrycode; /* ISO country code */ 159 uint16_t ic_regdomain; /* regulatory domain */ 160 uint8_t ic_location; /* unknown, indoor, outdoor */ 161 162 struct ieee80211_scan_state *ic_scan; /* scan state */ 163 enum ieee80211_roamingmode ic_roaming; /* roaming mode */ 164 int ic_lastdata; /* time of last data frame */ 165 int ic_lastscan; /* time last scan completed */ 166 int ic_des_nssid; /* # desired ssids */ 167 struct ieee80211_scan_ssid ic_des_ssid[1];/* desired ssid table */ 168 uint8_t ic_des_bssid[IEEE80211_ADDR_LEN]; 169 struct ieee80211_channel *ic_des_chan; /* desired channel */ 170 int ic_des_mode; /* desired phymode */ 171 u_int ic_bgscanidle; /* bg scan idle threshold */ 172 u_int ic_bgscanintvl; /* bg scan min interval */ 173 u_int ic_scanvalid; /* scan cache valid threshold */ 174 struct ieee80211_roam ic_roam; /* sta-mode roaming state */ 175 176 struct ieee80211_node_table ic_sta; /* stations/neighbors */ 177 178 struct ieee80211_wme_state ic_wme; /* WME/WMM state */ 179 const struct ieee80211_aclator *ic_acl; /* aclator glue */ 180 void *ic_as; /* private aclator state */ 181 182 enum ieee80211_protmode ic_protmode; /* 802.11g protection mode */ 183 uint16_t ic_nonerpsta; /* # non-ERP stations */ 184 uint16_t ic_longslotsta; /* # long slot time stations */ 185 uint16_t ic_sta_assoc; /* stations associated */ 186 uint16_t ic_ht_sta_assoc;/* HT stations associated */ 187 uint16_t ic_ht40_sta_assoc;/* HT40 stations associated */ 188 uint8_t ic_curhtprotmode;/* HTINFO bss state */ 189 enum ieee80211_protmode ic_htprotmode; /* HT protection mode */ 190 int ic_lastnonerp; /* last time non-ERP sta noted*/ 191 int ic_lastnonht; /* last time non-HT sta noted */ 192 193 struct ifqueue ic_mgtq; 194 enum ieee80211_state ic_state; /* 802.11 state */ 195 struct callout ic_mgtsend; /* mgmt frame response timer */ 196 uint32_t *ic_aid_bitmap; /* association id map */ 197 uint16_t ic_max_aid; 198 uint16_t ic_ps_sta; /* stations in power save */ 199 uint16_t ic_ps_pending; /* ps sta's w/ pending frames */ 200 uint8_t *ic_tim_bitmap; /* power-save stations w/ data*/ 201 uint16_t ic_tim_len; /* ic_tim_bitmap size (bytes) */ 202 uint8_t ic_dtim_period; /* DTIM period */ 203 uint8_t ic_dtim_count; /* DTIM count for last bcn */ 204 void * ic_rawbpf; /* packet filter structure */ 205 206 struct ieee80211_node *ic_bss; /* information for this node */ 207 int ic_fixed_rate; /* 802.11 rate or -1 */ 208 int ic_mcast_rate; /* rate for mcast frames */ 209 uint16_t ic_rtsthreshold; 210 uint16_t ic_fragthreshold; 211 uint8_t ic_bmissthreshold; 212 uint8_t ic_bmiss_count; /* current beacon miss count */ 213 int ic_bmiss_max; /* max bmiss before scan */ 214 uint16_t ic_swbmiss_count;/* beacons in last period */ 215 uint16_t ic_swbmiss_period;/* s/w bmiss period */ 216 struct callout ic_swbmiss; /* s/w beacon miss timer */ 217 218 uint16_t ic_txmin; /* min tx retry count */ 219 uint16_t ic_txmax; /* max tx retry count */ 220 uint16_t ic_txlifetime; /* tx lifetime */ 221 struct callout ic_inact; /* inactivity timer wait */ 222 void *ic_opt_ie; /* user-specified IE's */ 223 uint16_t ic_opt_ie_len; /* length of ni_opt_ie */ 224 int ic_inact_init; /* initial setting */ 225 int ic_inact_auth; /* auth but not assoc setting */ 226 int ic_inact_run; /* authorized setting */ 227 int ic_inact_probe; /* inactive probe time */ 228 229 /* 230 * Cipher state/configuration. 231 */ 232 struct ieee80211_crypto_state ic_crypto; 233 #define ic_nw_keys ic_crypto.cs_nw_keys /* XXX compatibility */ 234 #define ic_def_txkey ic_crypto.cs_def_txkey /* XXX compatibility */ 235 /* 236 * 802.1x glue. When an authenticator attaches it 237 * fills in this section. We assume that when ic_ec 238 * is setup that the methods are safe to call. 239 */ 240 const struct ieee80211_authenticator *ic_auth; 241 struct eapolcom *ic_ec; 242 243 /* send/recv 802.11 management frame */ 244 int (*ic_send_mgmt)(struct ieee80211com *, 245 struct ieee80211_node *, int, int); 246 void (*ic_recv_mgmt)(struct ieee80211com *, 247 struct mbuf *, struct ieee80211_node *, 248 int, int, int, uint32_t); 249 /* send raw 802.11 frame */ 250 int (*ic_raw_xmit)(struct ieee80211_node *, 251 struct mbuf *, 252 const struct ieee80211_bpf_params *); 253 /* reset device state after 802.11 parameter/state change */ 254 int (*ic_reset)(struct ifnet *); 255 /* [schedule] beacon frame update */ 256 void (*ic_update_beacon)(struct ieee80211com *, int); 257 /* update device state for 802.11 slot time change */ 258 void (*ic_updateslot)(struct ifnet *); 259 /* new station association callback/notification */ 260 void (*ic_newassoc)(struct ieee80211_node *, int); 261 /* node state management */ 262 struct ieee80211_node *(*ic_node_alloc)(struct ieee80211_node_table*); 263 void (*ic_node_free)(struct ieee80211_node *); 264 void (*ic_node_cleanup)(struct ieee80211_node *); 265 int8_t (*ic_node_getrssi)(const struct ieee80211_node*); 266 void (*ic_node_getsignal)(const struct ieee80211_node*, 267 int8_t *, int8_t *); 268 /* scanning support */ 269 void (*ic_scan_start)(struct ieee80211com *); 270 void (*ic_scan_end)(struct ieee80211com *); 271 void (*ic_set_channel)(struct ieee80211com *); 272 void (*ic_scan_curchan)(struct ieee80211com *, 273 unsigned long); 274 void (*ic_scan_mindwell)(struct ieee80211com *); 275 /* per-vap eventually... */ 276 int (*ic_newstate)(struct ieee80211com *, 277 enum ieee80211_state, int); 278 void (*ic_set_tim)(struct ieee80211_node *, int); 279 280 /* 281 * 802.11n ADDBA support. A simple/generic implementation 282 * of A-MPDU tx aggregation is provided; the driver may 283 * override these methods to provide their own support. 284 * A-MPDU rx re-ordering happens automatically if the 285 * driver passes out-of-order frames to ieee80211_input 286 * from an assocated HT station. 287 */ 288 void (*ic_recv_action)(struct ieee80211_node *, 289 const uint8_t *frm, const uint8_t *efrm); 290 int (*ic_send_action)(struct ieee80211_node *, 291 int category, int action, 292 uint16_t args[4]); 293 /* start/stop doing A-MPDU tx aggregation for a station */ 294 int (*ic_addba_request)(struct ieee80211_node *, 295 struct ieee80211_tx_ampdu *, 296 int dialogtoken, int baparamset, 297 int batimeout); 298 int (*ic_addba_response)(struct ieee80211_node *, 299 struct ieee80211_tx_ampdu *, 300 int status, int baparamset, int batimeout); 301 void (*ic_addba_stop)(struct ieee80211_node *, 302 struct ieee80211_tx_ampdu *); 303 }; 304 305 SLIST_HEAD(ieee80211_list, ieee80211com); 306 307 extern struct ieee80211_list ieee80211_list; 308 309 #define IEEE80211_ADDR_EQ(a1,a2) (memcmp(a1,a2,IEEE80211_ADDR_LEN) == 0) 310 #define IEEE80211_ADDR_COPY(dst,src) memcpy(dst,src,IEEE80211_ADDR_LEN) 311 312 /* ic_flags */ 313 /* NB: bits 0x4c available */ 314 #define IEEE80211_F_TURBOP 0x00000001 /* CONF: ATH Turbo enabled*/ 315 #define IEEE80211_F_COMP 0x00000002 /* CONF: ATH comp enabled */ 316 #define IEEE80211_F_FF 0x00000004 /* CONF: ATH FF enabled */ 317 #define IEEE80211_F_BURST 0x00000008 /* CONF: bursting enabled */ 318 /* NB: this is intentionally setup to be IEEE80211_CAPINFO_PRIVACY */ 319 #define IEEE80211_F_PRIVACY 0x00000010 /* CONF: privacy enabled */ 320 #define IEEE80211_F_PUREG 0x00000020 /* CONF: 11g w/o 11b sta's */ 321 #define IEEE80211_F_SCAN 0x00000080 /* STATUS: scanning */ 322 #define IEEE80211_F_ASCAN 0x00000100 /* STATUS: active scan */ 323 #define IEEE80211_F_SIBSS 0x00000200 /* STATUS: start IBSS */ 324 /* NB: this is intentionally setup to be IEEE80211_CAPINFO_SHORT_SLOTTIME */ 325 #define IEEE80211_F_SHSLOT 0x00000400 /* STATUS: use short slot time*/ 326 #define IEEE80211_F_PMGTON 0x00000800 /* CONF: Power mgmt enable */ 327 #define IEEE80211_F_DESBSSID 0x00001000 /* CONF: des_bssid is set */ 328 #define IEEE80211_F_WME 0x00002000 /* CONF: enable WME use */ 329 #define IEEE80211_F_BGSCAN 0x00004000 /* CONF: bg scan enabled (???)*/ 330 #define IEEE80211_F_SWRETRY 0x00008000 /* CONF: sw tx retry enabled */ 331 #define IEEE80211_F_TXPOW_FIXED 0x00010000 /* TX Power: fixed rate */ 332 #define IEEE80211_F_IBSSON 0x00020000 /* CONF: IBSS creation enable */ 333 #define IEEE80211_F_SHPREAMBLE 0x00040000 /* STATUS: use short preamble */ 334 #define IEEE80211_F_DATAPAD 0x00080000 /* CONF: do alignment pad */ 335 #define IEEE80211_F_USEPROT 0x00100000 /* STATUS: protection enabled */ 336 #define IEEE80211_F_USEBARKER 0x00200000 /* STATUS: use barker preamble*/ 337 #define IEEE80211_F_WPA1 0x00800000 /* CONF: WPA enabled */ 338 #define IEEE80211_F_WPA2 0x01000000 /* CONF: WPA2 enabled */ 339 #define IEEE80211_F_WPA 0x01800000 /* CONF: WPA/WPA2 enabled */ 340 #define IEEE80211_F_DROPUNENC 0x02000000 /* CONF: drop unencrypted */ 341 #define IEEE80211_F_COUNTERM 0x04000000 /* CONF: TKIP countermeasures */ 342 #define IEEE80211_F_HIDESSID 0x08000000 /* CONF: hide SSID in beacon */ 343 #define IEEE80211_F_NOBRIDGE 0x10000000 /* CONF: dis. internal bridge */ 344 #define IEEE80211_F_DOTH 0x40000000 /* CONF: 11h enabled */ 345 346 /* Atheros protocol-specific flags */ 347 #define IEEE80211_F_ATHEROS \ 348 (IEEE80211_F_FF | IEEE80211_F_COMP | IEEE80211_F_TURBOP) 349 /* Check if an Atheros capability was negotiated for use */ 350 #define IEEE80211_ATH_CAP(ic, ni, bit) \ 351 ((ic)->ic_flags & (ni)->ni_ath_flags & (bit)) 352 353 /* ic_flags_ext */ 354 #define IEEE80211_FEXT_NONHT_PR 0x00000001 /* STATUS: non-HT sta present */ 355 #define IEEE80211_FEXT_INACT 0x00000002 /* CONF: sta inact handling */ 356 /* 0x00000006 reserved */ 357 #define IEEE80211_FEXT_BGSCAN 0x00000008 /* STATUS: complete bgscan */ 358 #define IEEE80211_FEXT_NONERP_PR 0x00000200 /* STATUS: non-ERP sta present*/ 359 #define IEEE80211_FEXT_SWBMISS 0x00000400 /* CONF: do bmiss in s/w */ 360 #define IEEE80211_FEXT_PROBECHAN 0x00020000 /* CONF: probe passive channel*/ 361 #define IEEE80211_FEXT_HT 0x00080000 /* CONF: HT supported */ 362 #define IEEE80211_FEXT_AMPDU_TX 0x00100000 /* CONF: A-MPDU tx supported */ 363 #define IEEE80211_FEXT_AMPDU_RX 0x00200000 /* CONF: A-MPDU tx supported */ 364 #define IEEE80211_FEXT_AMSDU_TX 0x00400000 /* CONF: A-MSDU tx supported */ 365 #define IEEE80211_FEXT_AMSDU_RX 0x00800000 /* CONF: A-MSDU tx supported */ 366 #define IEEE80211_FEXT_USEHT40 0x01000000 /* CONF: 20/40 use enabled */ 367 #define IEEE80211_FEXT_PUREN 0x02000000 /* CONF: 11n w/o legacy sta's */ 368 #define IEEE80211_FEXT_SHORTGI20 0x04000000 /* CONF: short GI in HT20 */ 369 #define IEEE80211_FEXT_SHORTGI40 0x08000000 /* CONF: short GI in HT40 */ 370 #define IEEE80211_FEXT_HTCOMPAT 0x10000000 /* CONF: HT vendor OUI's */ 371 372 /* ic_caps */ 373 #define IEEE80211_C_WEP 0x00000001 /* CAPABILITY: WEP available */ 374 #define IEEE80211_C_TKIP 0x00000002 /* CAPABILITY: TKIP available */ 375 #define IEEE80211_C_AES 0x00000004 /* CAPABILITY: AES OCB avail */ 376 #define IEEE80211_C_AES_CCM 0x00000008 /* CAPABILITY: AES CCM avail */ 377 #define IEEE80211_C_CKIP 0x00000020 /* CAPABILITY: CKIP available */ 378 #define IEEE80211_C_FF 0x00000040 /* CAPABILITY: ATH FF avail */ 379 #define IEEE80211_C_TURBOP 0x00000080 /* CAPABILITY: ATH Turbo avail*/ 380 #define IEEE80211_C_IBSS 0x00000100 /* CAPABILITY: IBSS available */ 381 #define IEEE80211_C_PMGT 0x00000200 /* CAPABILITY: Power mgmt */ 382 #define IEEE80211_C_HOSTAP 0x00000400 /* CAPABILITY: HOSTAP avail */ 383 #define IEEE80211_C_AHDEMO 0x00000800 /* CAPABILITY: Old Adhoc Demo */ 384 #define IEEE80211_C_SWRETRY 0x00001000 /* CAPABILITY: sw tx retry */ 385 #define IEEE80211_C_TXPMGT 0x00002000 /* CAPABILITY: tx power mgmt */ 386 #define IEEE80211_C_SHSLOT 0x00004000 /* CAPABILITY: short slottime */ 387 #define IEEE80211_C_SHPREAMBLE 0x00008000 /* CAPABILITY: short preamble */ 388 #define IEEE80211_C_MONITOR 0x00010000 /* CAPABILITY: monitor mode */ 389 #define IEEE80211_C_TKIPMIC 0x00020000 /* CAPABILITY: TKIP MIC avail */ 390 #define IEEE80211_C_WPA1 0x00800000 /* CAPABILITY: WPA1 avail */ 391 #define IEEE80211_C_WPA2 0x01000000 /* CAPABILITY: WPA2 avail */ 392 #define IEEE80211_C_WPA 0x01800000 /* CAPABILITY: WPA1+WPA2 avail*/ 393 #define IEEE80211_C_BURST 0x02000000 /* CAPABILITY: frame bursting */ 394 #define IEEE80211_C_WME 0x04000000 /* CAPABILITY: WME avail */ 395 #define IEEE80211_C_WDS 0x08000000 /* CAPABILITY: 4-addr support */ 396 /* 0x10000000 reserved */ 397 #define IEEE80211_C_BGSCAN 0x20000000 /* CAPABILITY: bg scanning */ 398 #define IEEE80211_C_TXFRAG 0x40000000 /* CAPABILITY: tx fragments */ 399 /* XXX protection/barker? */ 400 401 #define IEEE80211_C_CRYPTO 0x0000002f /* CAPABILITY: crypto alg's */ 402 403 /* 404 * ic_htcaps: HT-specific device/driver capabilities 405 * 406 * NB: the low 16-bits are the 802.11 definitions, the upper 407 * 16-bits are used to define s/w/driver capabilities. 408 */ 409 #define IEEE80211_HTC_AMPDU 0x00010000 /* CAPABILITY: A-MPDU tx */ 410 #define IEEE80211_HTC_AMSDU 0x00020000 /* CAPABILITY: A-MSDU tx */ 411 /* NB: HT40 is implied by IEEE80211_HTCAP_CHWIDTH40 */ 412 #define IEEE80211_HTC_HT 0x00040000 /* CAPABILITY: HT operation */ 413 414 void ieee80211_ifattach(struct ieee80211com *); 415 void ieee80211_ifdetach(struct ieee80211com *); 416 const struct ieee80211_rateset *ieee80211_get_suprates(struct ieee80211com *ic, 417 const struct ieee80211_channel *); 418 void ieee80211_announce(struct ieee80211com *); 419 void ieee80211_announce_channels(struct ieee80211com *); 420 void ieee80211_media_init(struct ieee80211com *, 421 ifm_change_cb_t, ifm_stat_cb_t); 422 struct ieee80211com *ieee80211_find_vap(const uint8_t mac[IEEE80211_ADDR_LEN]); 423 int ieee80211_media_change(struct ifnet *); 424 void ieee80211_media_status(struct ifnet *, struct ifmediareq *); 425 int ieee80211_ioctl(struct ieee80211com *, u_long, void *); 426 int ieee80211_cfgget(struct ieee80211com *, u_long, void *); 427 int ieee80211_cfgset(struct ieee80211com *, u_long, void *); 428 void ieee80211_watchdog(struct ieee80211com *); 429 int ieee80211_rate2media(struct ieee80211com *, int, 430 enum ieee80211_phymode); 431 int ieee80211_media2rate(int); 432 int ieee80211_mhz2ieee(u_int, u_int); 433 int ieee80211_chan2ieee(struct ieee80211com *, 434 const struct ieee80211_channel *); 435 u_int ieee80211_ieee2mhz(u_int, u_int); 436 struct ieee80211_channel *ieee80211_find_channel(struct ieee80211com *, 437 int freq, int flags); 438 struct ieee80211_channel *ieee80211_find_channel_byieee(struct ieee80211com *, 439 int ieee, int flags); 440 int ieee80211_setmode(struct ieee80211com *, enum ieee80211_phymode); 441 enum ieee80211_phymode ieee80211_chan2mode(const struct ieee80211_channel *); 442 int ieee80211_get_rate(const struct ieee80211_node *); 443 444 /* 445 * Key update synchronization methods. XXX should not be visible. 446 */ 447 static __inline void 448 ieee80211_key_update_begin(struct ieee80211com *ic) 449 { 450 ic->ic_crypto.cs_key_update_begin(ic); 451 } 452 static __inline void 453 ieee80211_key_update_end(struct ieee80211com *ic) 454 { 455 ic->ic_crypto.cs_key_update_end(ic); 456 } 457 458 /* 459 * XXX these need to be here for IEEE80211_F_DATAPAD 460 */ 461 462 /* 463 * Return the space occupied by the 802.11 header and any 464 * padding required by the driver. This works for a 465 * management or data frame. 466 */ 467 static __inline int 468 ieee80211_hdrspace(struct ieee80211com *ic, const void *data) 469 { 470 int size = ieee80211_hdrsize(data); 471 if (ic->ic_flags & IEEE80211_F_DATAPAD) 472 size = roundup(size, sizeof(uint32_t)); 473 return size; 474 } 475 476 /* 477 * Like ieee80211_hdrspace, but handles any type of frame. 478 */ 479 static __inline int 480 ieee80211_anyhdrspace(struct ieee80211com *ic, const void *data) 481 { 482 int size = ieee80211_anyhdrsize(data); 483 if (ic->ic_flags & IEEE80211_F_DATAPAD) 484 size = roundup(size, sizeof(uint32_t)); 485 return size; 486 } 487 488 /* 489 * Notify a driver that beacon state has been updated. 490 */ 491 static __inline void 492 ieee80211_beacon_notify(struct ieee80211com *ic, int what) 493 { 494 if (ic->ic_state == IEEE80211_S_RUN) 495 ic->ic_update_beacon(ic, what); 496 } 497 498 /* 499 * Debugging facilities compiled in when IEEE80211_DEBUG is defined. 500 * 501 * The intent is that any problem in the net80211 layer can be 502 * diagnosed by inspecting the statistics (dumped by the wlanstats 503 * program) and/or the msgs generated by net80211. Messages are 504 * broken into functional classes and can be controlled with the 505 * wlandebug program. Certain of these msg groups are for facilities 506 * that are no longer part of net80211 (e.g. IEEE80211_MSG_DOT1X). 507 */ 508 #define IEEE80211_MSG_11N 0x80000000 /* 11n mode debug */ 509 #define IEEE80211_MSG_DEBUG 0x40000000 /* IFF_DEBUG equivalent */ 510 #define IEEE80211_MSG_DUMPPKTS 0x20000000 /* IFF_LINK2 equivalant */ 511 #define IEEE80211_MSG_CRYPTO 0x10000000 /* crypto work */ 512 #define IEEE80211_MSG_INPUT 0x08000000 /* input handling */ 513 #define IEEE80211_MSG_XRATE 0x04000000 /* rate set handling */ 514 #define IEEE80211_MSG_ELEMID 0x02000000 /* element id parsing */ 515 #define IEEE80211_MSG_NODE 0x01000000 /* node handling */ 516 #define IEEE80211_MSG_ASSOC 0x00800000 /* association handling */ 517 #define IEEE80211_MSG_AUTH 0x00400000 /* authentication handling */ 518 #define IEEE80211_MSG_SCAN 0x00200000 /* scanning */ 519 #define IEEE80211_MSG_OUTPUT 0x00100000 /* output handling */ 520 #define IEEE80211_MSG_STATE 0x00080000 /* state machine */ 521 #define IEEE80211_MSG_POWER 0x00040000 /* power save handling */ 522 #define IEEE80211_MSG_DOT1X 0x00020000 /* 802.1x authenticator */ 523 #define IEEE80211_MSG_DOT1XSM 0x00010000 /* 802.1x state machine */ 524 #define IEEE80211_MSG_RADIUS 0x00008000 /* 802.1x radius client */ 525 #define IEEE80211_MSG_RADDUMP 0x00004000 /* dump 802.1x radius packets */ 526 #define IEEE80211_MSG_RADKEYS 0x00002000 /* dump 802.1x keys */ 527 #define IEEE80211_MSG_WPA 0x00001000 /* WPA/RSN protocol */ 528 #define IEEE80211_MSG_ACL 0x00000800 /* ACL handling */ 529 #define IEEE80211_MSG_WME 0x00000400 /* WME protocol */ 530 #define IEEE80211_MSG_SUPERG 0x00000200 /* Atheros SuperG protocol */ 531 #define IEEE80211_MSG_DOTH 0x00000100 /* 802.11h support */ 532 #define IEEE80211_MSG_INACT 0x00000080 /* inactivity handling */ 533 #define IEEE80211_MSG_ROAM 0x00000040 /* sta-mode roaming */ 534 #define IEEE80211_MSG_RATECTL 0x00000020 /* tx rate control */ 535 #define IEEE80211_MSG_ACTION 0x00000010 /* action frame handling */ 536 #define IEEE80211_MSG_WDS 0x00000008 /* WDS handling */ 537 #define IEEE80211_MSG_IOCTL 0x00000004 /* ioctl handling */ 538 539 #define IEEE80211_MSG_ANY 0xffffffff /* anything */ 540 541 #ifdef IEEE80211_DEBUG 542 #define ieee80211_msg(_ic, _m) ((_ic)->ic_debug & (_m)) 543 #define IEEE80211_DPRINTF(_ic, _m, _fmt, ...) do { \ 544 if (ieee80211_msg(_ic, _m)) \ 545 ieee80211_note(_ic, _fmt, __VA_ARGS__); \ 546 } while (0) 547 #define IEEE80211_NOTE(_ic, _m, _ni, _fmt, ...) do { \ 548 if (ieee80211_msg(_ic, _m)) \ 549 ieee80211_note_mac(_ic, (_ni)->ni_macaddr, _fmt, __VA_ARGS__);\ 550 } while (0) 551 #define IEEE80211_NOTE_MAC(_ic, _m, _mac, _fmt, ...) do { \ 552 if (ieee80211_msg(_ic, _m)) \ 553 ieee80211_note_mac(_ic, _mac, _fmt, __VA_ARGS__); \ 554 } while (0) 555 #define IEEE80211_NOTE_FRAME(_ic, _m, _wh, _fmt, ...) do { \ 556 if (ieee80211_msg(_ic, _m)) \ 557 ieee80211_note_frame(_ic, _wh, _fmt, __VA_ARGS__); \ 558 } while (0) 559 void ieee80211_note(struct ieee80211com *ic, const char *fmt, ...); 560 void ieee80211_note_mac(struct ieee80211com *ic, 561 const uint8_t mac[IEEE80211_ADDR_LEN], const char *fmt, ...); 562 void ieee80211_note_frame(struct ieee80211com *ic, 563 const struct ieee80211_frame *wh, const char *fmt, ...); 564 #define ieee80211_msg_debug(_ic) \ 565 ((_ic)->ic_debug & IEEE80211_MSG_DEBUG) 566 #define ieee80211_msg_dumppkts(_ic) \ 567 ((_ic)->ic_debug & IEEE80211_MSG_DUMPPKTS) 568 #define ieee80211_msg_input(_ic) \ 569 ((_ic)->ic_debug & IEEE80211_MSG_INPUT) 570 #define ieee80211_msg_radius(_ic) \ 571 ((_ic)->ic_debug & IEEE80211_MSG_RADIUS) 572 #define ieee80211_msg_dumpradius(_ic) \ 573 ((_ic)->ic_debug & IEEE80211_MSG_RADDUMP) 574 #define ieee80211_msg_dumpradkeys(_ic) \ 575 ((_ic)->ic_debug & IEEE80211_MSG_RADKEYS) 576 #define ieee80211_msg_scan(_ic) \ 577 ((_ic)->ic_debug & IEEE80211_MSG_SCAN) 578 #define ieee80211_msg_assoc(_ic) \ 579 ((_ic)->ic_debug & IEEE80211_MSG_ASSOC) 580 581 /* 582 * Emit a debug message about discarding a frame or information 583 * element. One format is for extracting the mac address from 584 * the frame header; the other is for when a header is not 585 * available or otherwise appropriate. 586 */ 587 #define IEEE80211_DISCARD(_ic, _m, _wh, _type, _fmt, ...) do { \ 588 if ((_ic)->ic_debug & (_m)) \ 589 ieee80211_discard_frame(_ic, _wh, _type, _fmt, __VA_ARGS__);\ 590 } while (0) 591 #define IEEE80211_DISCARD_IE(_ic, _m, _wh, _type, _fmt, ...) do { \ 592 if ((_ic)->ic_debug & (_m)) \ 593 ieee80211_discard_ie(_ic, _wh, _type, _fmt, __VA_ARGS__);\ 594 } while (0) 595 #define IEEE80211_DISCARD_MAC(_ic, _m, _mac, _type, _fmt, ...) do { \ 596 if ((_ic)->ic_debug & (_m)) \ 597 ieee80211_discard_mac(_ic, _mac, _type, _fmt, __VA_ARGS__);\ 598 } while (0) 599 600 void ieee80211_discard_frame(struct ieee80211com *, 601 const struct ieee80211_frame *, const char *type, const char *fmt, ...); 602 void ieee80211_discard_ie(struct ieee80211com *, 603 const struct ieee80211_frame *, const char *type, const char *fmt, ...); 604 void ieee80211_discard_mac(struct ieee80211com *, 605 const uint8_t mac[IEEE80211_ADDR_LEN], const char *type, 606 const char *fmt, ...); 607 #else 608 #define IEEE80211_DPRINTF(_ic, _m, _fmt, ...) 609 #define IEEE80211_NOTE(_ic, _m, _ni, _fmt, ...) 610 #define IEEE80211_NOTE_FRAME(_ic, _m, _wh, _fmt, ...) 611 #define IEEE80211_NOTE_MAC(_ic, _m, _mac, _fmt, ...) 612 #define ieee80211_msg_dumppkts(_ic) 0 613 #define ieee80211_msg(_ic, _m) 0 614 615 #define IEEE80211_DISCARD(_ic, _m, _wh, _type, _fmt, ...) 616 #define IEEE80211_DISCARD_IE(_ic, _m, _wh, _type, _fmt, ...) 617 #define IEEE80211_DISCARD_MAC(_ic, _m, _mac, _type, _fmt, ...) 618 #endif 619 620 #endif /* !_NET80211_IEEE80211_VAR_H_ */ 621
Indexes created Thu Oct 02 10:09:58 GMT 2025