Home | History | Annotate | Line # | Download | only in netbt
hci_event.c revision 1.17
      1  1.17   plunky /*	$NetBSD: hci_event.c,v 1.17 2008/03/17 09:16:17 plunky Exp $	*/
      2   1.1  gdamore 
      3   1.1  gdamore /*-
      4   1.1  gdamore  * Copyright (c) 2005 Iain Hibbert.
      5   1.1  gdamore  * Copyright (c) 2006 Itronix Inc.
      6   1.1  gdamore  * All rights reserved.
      7   1.1  gdamore  *
      8   1.1  gdamore  * Redistribution and use in source and binary forms, with or without
      9   1.1  gdamore  * modification, are permitted provided that the following conditions
     10   1.1  gdamore  * are met:
     11   1.1  gdamore  * 1. Redistributions of source code must retain the above copyright
     12   1.1  gdamore  *    notice, this list of conditions and the following disclaimer.
     13   1.1  gdamore  * 2. Redistributions in binary form must reproduce the above copyright
     14   1.1  gdamore  *    notice, this list of conditions and the following disclaimer in the
     15   1.1  gdamore  *    documentation and/or other materials provided with the distribution.
     16   1.1  gdamore  * 3. The name of Itronix Inc. may not be used to endorse
     17   1.1  gdamore  *    or promote products derived from this software without specific
     18   1.1  gdamore  *    prior written permission.
     19   1.1  gdamore  *
     20   1.1  gdamore  * THIS SOFTWARE IS PROVIDED BY ITRONIX INC. ``AS IS'' AND
     21   1.1  gdamore  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     22   1.1  gdamore  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     23   1.1  gdamore  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL ITRONIX INC. BE LIABLE FOR ANY
     24   1.1  gdamore  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
     25   1.1  gdamore  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
     26   1.1  gdamore  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
     27   1.1  gdamore  * ON ANY THEORY OF LIABILITY, WHETHER IN
     28   1.1  gdamore  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     29   1.1  gdamore  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     30   1.1  gdamore  * POSSIBILITY OF SUCH DAMAGE.
     31   1.1  gdamore  */
     32   1.1  gdamore 
     33   1.1  gdamore #include <sys/cdefs.h>
     34  1.17   plunky __KERNEL_RCSID(0, "$NetBSD: hci_event.c,v 1.17 2008/03/17 09:16:17 plunky Exp $");
     35   1.1  gdamore 
     36   1.1  gdamore #include <sys/param.h>
     37   1.1  gdamore #include <sys/kernel.h>
     38   1.1  gdamore #include <sys/malloc.h>
     39   1.1  gdamore #include <sys/mbuf.h>
     40   1.1  gdamore #include <sys/proc.h>
     41   1.1  gdamore #include <sys/systm.h>
     42   1.1  gdamore 
     43   1.1  gdamore #include <netbt/bluetooth.h>
     44   1.1  gdamore #include <netbt/hci.h>
     45   1.1  gdamore #include <netbt/sco.h>
     46   1.1  gdamore 
     47   1.1  gdamore static void hci_event_inquiry_result(struct hci_unit *, struct mbuf *);
     48   1.8   plunky static void hci_event_rssi_result(struct hci_unit *, struct mbuf *);
     49   1.1  gdamore static void hci_event_command_status(struct hci_unit *, struct mbuf *);
     50   1.1  gdamore static void hci_event_command_compl(struct hci_unit *, struct mbuf *);
     51   1.1  gdamore static void hci_event_con_compl(struct hci_unit *, struct mbuf *);
     52   1.1  gdamore static void hci_event_discon_compl(struct hci_unit *, struct mbuf *);
     53   1.1  gdamore static void hci_event_con_req(struct hci_unit *, struct mbuf *);
     54   1.1  gdamore static void hci_event_num_compl_pkts(struct hci_unit *, struct mbuf *);
     55   1.6   plunky static void hci_event_auth_compl(struct hci_unit *, struct mbuf *);
     56   1.6   plunky static void hci_event_encryption_change(struct hci_unit *, struct mbuf *);
     57   1.6   plunky static void hci_event_change_con_link_key_compl(struct hci_unit *, struct mbuf *);
     58   1.9   plunky static void hci_event_read_clock_offset_compl(struct hci_unit *, struct mbuf *);
     59   1.1  gdamore static void hci_cmd_read_bdaddr(struct hci_unit *, struct mbuf *);
     60   1.1  gdamore static void hci_cmd_read_buffer_size(struct hci_unit *, struct mbuf *);
     61   1.1  gdamore static void hci_cmd_read_local_features(struct hci_unit *, struct mbuf *);
     62  1.13   plunky static void hci_cmd_read_local_ver(struct hci_unit *, struct mbuf *);
     63  1.13   plunky static void hci_cmd_read_local_commands(struct hci_unit *, struct mbuf *);
     64   1.1  gdamore static void hci_cmd_reset(struct hci_unit *, struct mbuf *);
     65  1.15   plunky static void hci_cmd_create_con(struct hci_unit *unit, uint8_t status);
     66   1.1  gdamore 
     67   1.1  gdamore #ifdef BLUETOOTH_DEBUG
     68   1.5   plunky int bluetooth_debug;
     69   1.1  gdamore 
     70   1.1  gdamore static const char *hci_eventnames[] = {
     71   1.1  gdamore /* 0x00 */ "NULL",
     72   1.1  gdamore /* 0x01 */ "INQUIRY COMPLETE",
     73   1.1  gdamore /* 0x02 */ "INQUIRY RESULT",
     74   1.1  gdamore /* 0x03 */ "CONN COMPLETE",
     75   1.1  gdamore /* 0x04 */ "CONN REQ",
     76   1.1  gdamore /* 0x05 */ "DISCONN COMPLETE",
     77   1.1  gdamore /* 0x06 */ "AUTH COMPLETE",
     78   1.1  gdamore /* 0x07 */ "REMOTE NAME REQ COMPLETE",
     79   1.1  gdamore /* 0x08 */ "ENCRYPTION CHANGE",
     80   1.1  gdamore /* 0x09 */ "CHANGE CONN LINK KEY COMPLETE",
     81   1.1  gdamore /* 0x0a */ "MASTER LINK KEY COMPLETE",
     82   1.1  gdamore /* 0x0b */ "READ REMOTE FEATURES COMPLETE",
     83   1.1  gdamore /* 0x0c */ "READ REMOTE VERSION INFO COMPLETE",
     84   1.1  gdamore /* 0x0d */ "QoS SETUP COMPLETE",
     85   1.1  gdamore /* 0x0e */ "COMMAND COMPLETE",
     86   1.1  gdamore /* 0x0f */ "COMMAND STATUS",
     87   1.1  gdamore /* 0x10 */ "HARDWARE ERROR",
     88   1.1  gdamore /* 0x11 */ "FLUSH OCCUR",
     89   1.1  gdamore /* 0x12 */ "ROLE CHANGE",
     90   1.1  gdamore /* 0x13 */ "NUM COMPLETED PACKETS",
     91   1.1  gdamore /* 0x14 */ "MODE CHANGE",
     92   1.1  gdamore /* 0x15 */ "RETURN LINK KEYS",
     93   1.1  gdamore /* 0x16 */ "PIN CODE REQ",
     94   1.1  gdamore /* 0x17 */ "LINK KEY REQ",
     95   1.1  gdamore /* 0x18 */ "LINK KEY NOTIFICATION",
     96   1.1  gdamore /* 0x19 */ "LOOPBACK COMMAND",
     97   1.1  gdamore /* 0x1a */ "DATA BUFFER OVERFLOW",
     98   1.1  gdamore /* 0x1b */ "MAX SLOT CHANGE",
     99   1.1  gdamore /* 0x1c */ "READ CLOCK OFFSET COMPLETE",
    100   1.1  gdamore /* 0x1d */ "CONN PKT TYPE CHANGED",
    101   1.1  gdamore /* 0x1e */ "QOS VIOLATION",
    102   1.1  gdamore /* 0x1f */ "PAGE SCAN MODE CHANGE",
    103   1.1  gdamore /* 0x20 */ "PAGE SCAN REP MODE CHANGE",
    104   1.1  gdamore /* 0x21 */ "FLOW SPECIFICATION COMPLETE",
    105   1.1  gdamore /* 0x22 */ "RSSI RESULT",
    106  1.14   plunky /* 0x23 */ "READ REMOTE EXT FEATURES",
    107  1.14   plunky /* 0x24 */ "UNKNOWN",
    108  1.14   plunky /* 0x25 */ "UNKNOWN",
    109  1.14   plunky /* 0x26 */ "UNKNOWN",
    110  1.14   plunky /* 0x27 */ "UNKNOWN",
    111  1.14   plunky /* 0x28 */ "UNKNOWN",
    112  1.14   plunky /* 0x29 */ "UNKNOWN",
    113  1.14   plunky /* 0x2a */ "UNKNOWN",
    114  1.14   plunky /* 0x2b */ "UNKNOWN",
    115  1.14   plunky /* 0x2c */ "SCO CON COMPLETE",
    116  1.14   plunky /* 0x2d */ "SCO CON CHANGED",
    117  1.14   plunky /* 0x2e */ "SNIFF SUBRATING",
    118  1.14   plunky /* 0x2f */ "EXTENDED INQUIRY RESULT",
    119  1.14   plunky /* 0x30 */ "ENCRYPTION KEY REFRESH",
    120  1.14   plunky /* 0x31 */ "IO CAPABILITY REQUEST",
    121  1.14   plunky /* 0x32 */ "IO CAPABILITY RESPONSE",
    122  1.14   plunky /* 0x33 */ "USER CONFIRM REQUEST",
    123  1.14   plunky /* 0x34 */ "USER PASSKEY REQUEST",
    124  1.14   plunky /* 0x35 */ "REMOTE OOB DATA REQUEST",
    125  1.14   plunky /* 0x36 */ "SIMPLE PAIRING COMPLETE",
    126  1.14   plunky /* 0x37 */ "UNKNOWN",
    127  1.14   plunky /* 0x38 */ "LINK SUPERVISION TIMEOUT CHANGED",
    128  1.14   plunky /* 0x39 */ "ENHANCED FLUSH COMPLETE",
    129  1.14   plunky /* 0x3a */ "UNKNOWN",
    130  1.14   plunky /* 0x3b */ "USER PASSKEY NOTIFICATION",
    131  1.14   plunky /* 0x3c */ "KEYPRESS NOTIFICATION",
    132  1.14   plunky /* 0x3d */ "REMOTE HOST FEATURES NOTIFICATION",
    133   1.1  gdamore };
    134   1.1  gdamore 
    135   1.1  gdamore static const char *
    136   1.1  gdamore hci_eventstr(unsigned int event)
    137   1.1  gdamore {
    138   1.1  gdamore 
    139  1.14   plunky 	if (event < __arraycount(hci_eventnames))
    140   1.1  gdamore 		return hci_eventnames[event];
    141   1.1  gdamore 
    142   1.1  gdamore 	switch (event) {
    143   1.1  gdamore 	case HCI_EVENT_BT_LOGO:		/* 0xfe */
    144   1.1  gdamore 		return "BT_LOGO";
    145   1.1  gdamore 
    146   1.1  gdamore 	case HCI_EVENT_VENDOR:		/* 0xff */
    147   1.1  gdamore 		return "VENDOR";
    148   1.1  gdamore 	}
    149   1.1  gdamore 
    150  1.14   plunky 	return "UNKNOWN";
    151   1.1  gdamore }
    152   1.1  gdamore #endif	/* BLUETOOTH_DEBUG */
    153   1.1  gdamore 
    154   1.1  gdamore /*
    155   1.1  gdamore  * process HCI Events
    156   1.1  gdamore  *
    157   1.1  gdamore  * We will free the mbuf at the end, no need for any sub
    158   1.1  gdamore  * functions to handle that. We kind of assume that the
    159   1.1  gdamore  * device sends us valid events.
    160   1.1  gdamore  */
    161   1.1  gdamore void
    162   1.1  gdamore hci_event(struct mbuf *m, struct hci_unit *unit)
    163   1.1  gdamore {
    164   1.1  gdamore 	hci_event_hdr_t hdr;
    165   1.1  gdamore 
    166   1.1  gdamore 	KASSERT(m->m_flags & M_PKTHDR);
    167   1.1  gdamore 
    168   1.1  gdamore 	KASSERT(m->m_pkthdr.len >= sizeof(hdr));
    169   1.1  gdamore 	m_copydata(m, 0, sizeof(hdr), &hdr);
    170   1.1  gdamore 	m_adj(m, sizeof(hdr));
    171   1.1  gdamore 
    172   1.1  gdamore 	KASSERT(hdr.type == HCI_EVENT_PKT);
    173   1.1  gdamore 
    174  1.10   plunky 	DPRINTFN(1, "(%s) event %s\n",
    175  1.10   plunky 	    device_xname(unit->hci_dev), hci_eventstr(hdr.event));
    176   1.1  gdamore 
    177   1.1  gdamore 	switch(hdr.event) {
    178   1.1  gdamore 	case HCI_EVENT_COMMAND_STATUS:
    179   1.1  gdamore 		hci_event_command_status(unit, m);
    180   1.1  gdamore 		break;
    181   1.1  gdamore 
    182   1.1  gdamore 	case HCI_EVENT_COMMAND_COMPL:
    183   1.1  gdamore 		hci_event_command_compl(unit, m);
    184   1.1  gdamore 		break;
    185   1.1  gdamore 
    186   1.1  gdamore 	case HCI_EVENT_NUM_COMPL_PKTS:
    187   1.1  gdamore 		hci_event_num_compl_pkts(unit, m);
    188   1.1  gdamore 		break;
    189   1.1  gdamore 
    190   1.1  gdamore 	case HCI_EVENT_INQUIRY_RESULT:
    191   1.1  gdamore 		hci_event_inquiry_result(unit, m);
    192   1.1  gdamore 		break;
    193   1.1  gdamore 
    194   1.8   plunky 	case HCI_EVENT_RSSI_RESULT:
    195   1.8   plunky 		hci_event_rssi_result(unit, m);
    196   1.8   plunky 		break;
    197   1.8   plunky 
    198   1.1  gdamore 	case HCI_EVENT_CON_COMPL:
    199   1.1  gdamore 		hci_event_con_compl(unit, m);
    200   1.1  gdamore 		break;
    201   1.1  gdamore 
    202   1.1  gdamore 	case HCI_EVENT_DISCON_COMPL:
    203   1.1  gdamore 		hci_event_discon_compl(unit, m);
    204   1.1  gdamore 		break;
    205   1.1  gdamore 
    206   1.1  gdamore 	case HCI_EVENT_CON_REQ:
    207   1.1  gdamore 		hci_event_con_req(unit, m);
    208   1.1  gdamore 		break;
    209   1.1  gdamore 
    210   1.6   plunky 	case HCI_EVENT_AUTH_COMPL:
    211   1.6   plunky 		hci_event_auth_compl(unit, m);
    212   1.6   plunky 		break;
    213   1.6   plunky 
    214   1.6   plunky 	case HCI_EVENT_ENCRYPTION_CHANGE:
    215   1.6   plunky 		hci_event_encryption_change(unit, m);
    216   1.6   plunky 		break;
    217   1.6   plunky 
    218   1.6   plunky 	case HCI_EVENT_CHANGE_CON_LINK_KEY_COMPL:
    219   1.6   plunky 		hci_event_change_con_link_key_compl(unit, m);
    220   1.6   plunky 		break;
    221   1.6   plunky 
    222   1.9   plunky 	case HCI_EVENT_READ_CLOCK_OFFSET_COMPL:
    223   1.9   plunky 		hci_event_read_clock_offset_compl(unit, m);
    224   1.9   plunky 		break;
    225   1.9   plunky 
    226   1.1  gdamore 	default:
    227   1.1  gdamore 		break;
    228   1.1  gdamore 	}
    229   1.1  gdamore 
    230   1.1  gdamore 	m_freem(m);
    231   1.1  gdamore }
    232   1.1  gdamore 
    233   1.1  gdamore /*
    234   1.1  gdamore  * Command Status
    235   1.1  gdamore  *
    236  1.17   plunky  * Restart command queue and post-process any pending commands
    237   1.1  gdamore  */
    238   1.1  gdamore static void
    239   1.1  gdamore hci_event_command_status(struct hci_unit *unit, struct mbuf *m)
    240   1.1  gdamore {
    241   1.1  gdamore 	hci_command_status_ep ep;
    242   1.1  gdamore 
    243   1.1  gdamore 	KASSERT(m->m_pkthdr.len >= sizeof(ep));
    244   1.1  gdamore 	m_copydata(m, 0, sizeof(ep), &ep);
    245   1.1  gdamore 	m_adj(m, sizeof(ep));
    246   1.1  gdamore 
    247  1.15   plunky 	ep.opcode = le16toh(ep.opcode);
    248  1.15   plunky 
    249   1.6   plunky 	DPRINTFN(1, "(%s) opcode (%03x|%04x) status = 0x%x num_cmd_pkts = %d\n",
    250  1.10   plunky 		device_xname(unit->hci_dev),
    251  1.15   plunky 		HCI_OGF(ep.opcode), HCI_OCF(ep.opcode),
    252   1.6   plunky 		ep.status,
    253   1.1  gdamore 		ep.num_cmd_pkts);
    254   1.1  gdamore 
    255  1.17   plunky 	hci_num_cmds(unit, ep.num_cmd_pkts);
    256   1.1  gdamore 
    257   1.1  gdamore 	/*
    258   1.1  gdamore 	 * post processing of pending commands
    259   1.1  gdamore 	 */
    260  1.15   plunky 	switch(ep.opcode) {
    261  1.15   plunky 	case HCI_CMD_CREATE_CON:
    262  1.15   plunky 		hci_cmd_create_con(unit, ep.status);
    263  1.15   plunky 		break;
    264  1.15   plunky 
    265   1.1  gdamore 	default:
    266  1.15   plunky 		if (ep.status == 0)
    267  1.15   plunky 			break;
    268  1.15   plunky 
    269  1.15   plunky 		aprint_error_dev(unit->hci_dev,
    270  1.15   plunky 		    "CommandStatus opcode (%03x|%04x) failed (status=0x%02x)\n",
    271  1.15   plunky 		    HCI_OGF(ep.opcode), HCI_OCF(ep.opcode),
    272  1.15   plunky 		    ep.status);
    273  1.15   plunky 
    274   1.1  gdamore 		break;
    275   1.1  gdamore 	}
    276   1.1  gdamore }
    277   1.1  gdamore 
    278   1.1  gdamore /*
    279   1.1  gdamore  * Command Complete
    280   1.1  gdamore  *
    281  1.17   plunky  * Restart command queue and handle the completed command
    282   1.1  gdamore  */
    283   1.1  gdamore static void
    284   1.1  gdamore hci_event_command_compl(struct hci_unit *unit, struct mbuf *m)
    285   1.1  gdamore {
    286   1.1  gdamore 	hci_command_compl_ep ep;
    287  1.12   plunky 	hci_status_rp rp;
    288   1.1  gdamore 
    289   1.1  gdamore 	KASSERT(m->m_pkthdr.len >= sizeof(ep));
    290   1.1  gdamore 	m_copydata(m, 0, sizeof(ep), &ep);
    291   1.1  gdamore 	m_adj(m, sizeof(ep));
    292   1.1  gdamore 
    293   1.1  gdamore 	DPRINTFN(1, "(%s) opcode (%03x|%04x) num_cmd_pkts = %d\n",
    294  1.10   plunky 		device_xname(unit->hci_dev),
    295   1.1  gdamore 		HCI_OGF(le16toh(ep.opcode)), HCI_OCF(le16toh(ep.opcode)),
    296   1.1  gdamore 		ep.num_cmd_pkts);
    297   1.1  gdamore 
    298  1.17   plunky 	hci_num_cmds(unit, ep.num_cmd_pkts);
    299  1.17   plunky 
    300  1.12   plunky 	/*
    301  1.12   plunky 	 * I am not sure if this is completely correct, it is not guaranteed
    302  1.12   plunky 	 * that a command_complete packet will contain the status though most
    303  1.12   plunky 	 * do seem to.
    304  1.12   plunky 	 */
    305  1.12   plunky 	m_copydata(m, 0, sizeof(rp), &rp);
    306  1.12   plunky 	if (rp.status > 0)
    307  1.12   plunky 		aprint_error_dev(unit->hci_dev,
    308  1.12   plunky 		    "CommandComplete opcode (%03x|%04x) failed (status=0x%02x)\n",
    309  1.12   plunky 		    HCI_OGF(le16toh(ep.opcode)), HCI_OCF(le16toh(ep.opcode)),
    310  1.12   plunky 		    rp.status);
    311  1.12   plunky 
    312   1.1  gdamore 	/*
    313   1.1  gdamore 	 * post processing of completed commands
    314   1.1  gdamore 	 */
    315   1.1  gdamore 	switch(le16toh(ep.opcode)) {
    316   1.1  gdamore 	case HCI_CMD_READ_BDADDR:
    317   1.1  gdamore 		hci_cmd_read_bdaddr(unit, m);
    318   1.1  gdamore 		break;
    319   1.1  gdamore 
    320   1.1  gdamore 	case HCI_CMD_READ_BUFFER_SIZE:
    321   1.1  gdamore 		hci_cmd_read_buffer_size(unit, m);
    322   1.1  gdamore 		break;
    323   1.1  gdamore 
    324   1.1  gdamore 	case HCI_CMD_READ_LOCAL_FEATURES:
    325   1.1  gdamore 		hci_cmd_read_local_features(unit, m);
    326   1.1  gdamore 		break;
    327   1.1  gdamore 
    328  1.13   plunky 	case HCI_CMD_READ_LOCAL_VER:
    329  1.13   plunky 		hci_cmd_read_local_ver(unit, m);
    330  1.13   plunky 		break;
    331  1.13   plunky 
    332  1.13   plunky 	case HCI_CMD_READ_LOCAL_COMMANDS:
    333  1.13   plunky 		hci_cmd_read_local_commands(unit, m);
    334  1.13   plunky 		break;
    335  1.13   plunky 
    336   1.1  gdamore 	case HCI_CMD_RESET:
    337   1.1  gdamore 		hci_cmd_reset(unit, m);
    338   1.1  gdamore 		break;
    339   1.1  gdamore 
    340   1.1  gdamore 	default:
    341   1.1  gdamore 		break;
    342   1.1  gdamore 	}
    343   1.1  gdamore }
    344   1.1  gdamore 
    345   1.1  gdamore /*
    346   1.1  gdamore  * Number of Completed Packets
    347   1.1  gdamore  *
    348   1.1  gdamore  * This is sent periodically by the Controller telling us how many
    349   1.1  gdamore  * buffers are now freed up and which handle was using them. From
    350   1.1  gdamore  * this we determine which type of buffer it was and add the qty
    351   1.1  gdamore  * back into the relevant packet counter, then restart output on
    352   1.1  gdamore  * links that have halted.
    353   1.1  gdamore  */
    354   1.1  gdamore static void
    355   1.1  gdamore hci_event_num_compl_pkts(struct hci_unit *unit, struct mbuf *m)
    356   1.1  gdamore {
    357   1.1  gdamore 	hci_num_compl_pkts_ep ep;
    358   1.1  gdamore 	struct hci_link *link, *next;
    359   1.1  gdamore 	uint16_t handle, num;
    360   1.1  gdamore 	int num_acl = 0, num_sco = 0;
    361   1.1  gdamore 
    362   1.1  gdamore 	KASSERT(m->m_pkthdr.len >= sizeof(ep));
    363   1.1  gdamore 	m_copydata(m, 0, sizeof(ep), &ep);
    364   1.1  gdamore 	m_adj(m, sizeof(ep));
    365   1.1  gdamore 
    366   1.1  gdamore 	while (ep.num_con_handles--) {
    367   1.7   plunky 		m_copydata(m, 0, sizeof(handle), &handle);
    368   1.1  gdamore 		m_adj(m, sizeof(handle));
    369   1.1  gdamore 		handle = le16toh(handle);
    370   1.1  gdamore 
    371   1.7   plunky 		m_copydata(m, 0, sizeof(num), &num);
    372   1.1  gdamore 		m_adj(m, sizeof(num));
    373   1.1  gdamore 		num = le16toh(num);
    374   1.1  gdamore 
    375   1.1  gdamore 		link = hci_link_lookup_handle(unit, handle);
    376   1.1  gdamore 		if (link) {
    377   1.1  gdamore 			if (link->hl_type == HCI_LINK_ACL) {
    378   1.1  gdamore 				num_acl += num;
    379   1.1  gdamore 				hci_acl_complete(link, num);
    380   1.1  gdamore 			} else {
    381   1.1  gdamore 				num_sco += num;
    382   1.1  gdamore 				hci_sco_complete(link, num);
    383   1.1  gdamore 			}
    384   1.1  gdamore 		} else {
    385   1.4   plunky 			/* XXX need to issue Read_Buffer_Size or Reset? */
    386  1.10   plunky 			aprint_error_dev(unit->hci_dev,
    387  1.10   plunky 			    "unknown handle %d! (losing track of %d packet buffer%s)\n",
    388  1.10   plunky 			    handle, num, (num == 1 ? "" : "s"));
    389   1.1  gdamore 		}
    390   1.1  gdamore 	}
    391   1.1  gdamore 
    392   1.1  gdamore 	/*
    393   1.1  gdamore 	 * Move up any queued packets. When a link has sent data, it will move
    394   1.1  gdamore 	 * to the back of the queue - technically then if a link had something
    395   1.1  gdamore 	 * to send and there were still buffers available it could get started
    396   1.1  gdamore 	 * twice but it seemed more important to to handle higher loads fairly
    397   1.1  gdamore 	 * than worry about wasting cycles when we are not busy.
    398   1.1  gdamore 	 */
    399   1.1  gdamore 
    400   1.1  gdamore 	unit->hci_num_acl_pkts += num_acl;
    401   1.1  gdamore 	unit->hci_num_sco_pkts += num_sco;
    402   1.1  gdamore 
    403   1.1  gdamore 	link = TAILQ_FIRST(&unit->hci_links);
    404   1.1  gdamore 	while (link && (unit->hci_num_acl_pkts > 0 || unit->hci_num_sco_pkts > 0)) {
    405   1.1  gdamore 		next = TAILQ_NEXT(link, hl_next);
    406   1.1  gdamore 
    407   1.1  gdamore 		if (link->hl_type == HCI_LINK_ACL) {
    408   1.1  gdamore 			if (unit->hci_num_acl_pkts > 0 && link->hl_txqlen > 0)
    409   1.1  gdamore 				hci_acl_start(link);
    410   1.1  gdamore 		} else {
    411   1.1  gdamore 			if (unit->hci_num_sco_pkts > 0 && link->hl_txqlen > 0)
    412   1.1  gdamore 				hci_sco_start(link);
    413   1.1  gdamore 		}
    414   1.1  gdamore 
    415   1.1  gdamore 		link = next;
    416   1.1  gdamore 	}
    417   1.1  gdamore }
    418   1.1  gdamore 
    419   1.1  gdamore /*
    420   1.1  gdamore  * Inquiry Result
    421   1.1  gdamore  *
    422   1.1  gdamore  * keep a note of devices seen, so we know which unit to use
    423   1.1  gdamore  * on outgoing connections
    424   1.1  gdamore  */
    425   1.1  gdamore static void
    426   1.1  gdamore hci_event_inquiry_result(struct hci_unit *unit, struct mbuf *m)
    427   1.1  gdamore {
    428   1.1  gdamore 	hci_inquiry_result_ep ep;
    429   1.8   plunky 	hci_inquiry_response ir;
    430   1.1  gdamore 	struct hci_memo *memo;
    431   1.1  gdamore 
    432   1.1  gdamore 	KASSERT(m->m_pkthdr.len >= sizeof(ep));
    433   1.1  gdamore 	m_copydata(m, 0, sizeof(ep), &ep);
    434   1.1  gdamore 	m_adj(m, sizeof(ep));
    435   1.1  gdamore 
    436   1.1  gdamore 	DPRINTFN(1, "%d response%s\n", ep.num_responses,
    437   1.1  gdamore 				(ep.num_responses == 1 ? "" : "s"));
    438   1.1  gdamore 
    439   1.1  gdamore 	while(ep.num_responses--) {
    440   1.9   plunky 		KASSERT(m->m_pkthdr.len >= sizeof(ir));
    441   1.9   plunky 		m_copydata(m, 0, sizeof(ir), &ir);
    442   1.9   plunky 		m_adj(m, sizeof(ir));
    443   1.1  gdamore 
    444   1.1  gdamore 		DPRINTFN(1, "bdaddr %02x:%02x:%02x:%02x:%02x:%02x\n",
    445   1.9   plunky 			ir.bdaddr.b[5], ir.bdaddr.b[4], ir.bdaddr.b[3],
    446   1.9   plunky 			ir.bdaddr.b[2], ir.bdaddr.b[1], ir.bdaddr.b[0]);
    447   1.1  gdamore 
    448   1.9   plunky 		memo = hci_memo_new(unit, &ir.bdaddr);
    449   1.9   plunky 		if (memo != NULL) {
    450   1.9   plunky 			memo->page_scan_rep_mode = ir.page_scan_rep_mode;
    451   1.9   plunky 			memo->page_scan_mode = ir.page_scan_mode;
    452   1.9   plunky 			memo->clock_offset = ir.clock_offset;
    453   1.1  gdamore 		}
    454   1.8   plunky 	}
    455   1.8   plunky }
    456   1.8   plunky 
    457   1.8   plunky /*
    458   1.8   plunky  * Inquiry Result with RSSI
    459   1.8   plunky  *
    460   1.8   plunky  * as above but different packet when RSSI result is enabled
    461   1.8   plunky  */
    462   1.8   plunky static void
    463   1.8   plunky hci_event_rssi_result(struct hci_unit *unit, struct mbuf *m)
    464   1.8   plunky {
    465   1.8   plunky 	hci_rssi_result_ep ep;
    466   1.8   plunky 	hci_rssi_response rr;
    467   1.8   plunky 	struct hci_memo *memo;
    468   1.8   plunky 
    469   1.8   plunky 	KASSERT(m->m_pkthdr.len >= sizeof(ep));
    470   1.8   plunky 	m_copydata(m, 0, sizeof(ep), &ep);
    471   1.8   plunky 	m_adj(m, sizeof(ep));
    472   1.8   plunky 
    473   1.8   plunky 	DPRINTFN(1, "%d response%s\n", ep.num_responses,
    474   1.8   plunky 				(ep.num_responses == 1 ? "" : "s"));
    475   1.8   plunky 
    476   1.8   plunky 	while(ep.num_responses--) {
    477   1.9   plunky 		KASSERT(m->m_pkthdr.len >= sizeof(rr));
    478   1.9   plunky 		m_copydata(m, 0, sizeof(rr), &rr);
    479   1.9   plunky 		m_adj(m, sizeof(rr));
    480   1.2   plunky 
    481   1.8   plunky 		DPRINTFN(1, "bdaddr %02x:%02x:%02x:%02x:%02x:%02x\n",
    482   1.9   plunky 			rr.bdaddr.b[5], rr.bdaddr.b[4], rr.bdaddr.b[3],
    483   1.9   plunky 			rr.bdaddr.b[2], rr.bdaddr.b[1], rr.bdaddr.b[0]);
    484   1.8   plunky 
    485   1.9   plunky 		memo = hci_memo_new(unit, &rr.bdaddr);
    486   1.9   plunky 		if (memo != NULL) {
    487   1.9   plunky 			memo->page_scan_rep_mode = rr.page_scan_rep_mode;
    488   1.9   plunky 			memo->page_scan_mode = 0;
    489   1.9   plunky 			memo->clock_offset = rr.clock_offset;
    490   1.8   plunky 		}
    491   1.1  gdamore 	}
    492   1.1  gdamore }
    493   1.1  gdamore 
    494   1.1  gdamore /*
    495   1.1  gdamore  * Connection Complete
    496   1.1  gdamore  *
    497   1.1  gdamore  * Sent to us when a connection is made. If there is no link
    498   1.1  gdamore  * structure already allocated for this, we must have changed
    499   1.1  gdamore  * our mind, so just disconnect.
    500   1.1  gdamore  */
    501   1.1  gdamore static void
    502   1.1  gdamore hci_event_con_compl(struct hci_unit *unit, struct mbuf *m)
    503   1.1  gdamore {
    504   1.1  gdamore 	hci_con_compl_ep ep;
    505   1.1  gdamore 	hci_write_link_policy_settings_cp cp;
    506   1.1  gdamore 	struct hci_link *link;
    507   1.1  gdamore 	int err;
    508   1.1  gdamore 
    509   1.1  gdamore 	KASSERT(m->m_pkthdr.len >= sizeof(ep));
    510   1.1  gdamore 	m_copydata(m, 0, sizeof(ep), &ep);
    511   1.1  gdamore 	m_adj(m, sizeof(ep));
    512   1.1  gdamore 
    513   1.1  gdamore 	DPRINTFN(1, "(%s) %s connection complete for "
    514   1.1  gdamore 		"%02x:%02x:%02x:%02x:%02x:%02x status %#x\n",
    515  1.10   plunky 		device_xname(unit->hci_dev),
    516   1.1  gdamore 		(ep.link_type == HCI_LINK_ACL ? "ACL" : "SCO"),
    517   1.1  gdamore 		ep.bdaddr.b[5], ep.bdaddr.b[4], ep.bdaddr.b[3],
    518   1.1  gdamore 		ep.bdaddr.b[2], ep.bdaddr.b[1], ep.bdaddr.b[0],
    519   1.1  gdamore 		ep.status);
    520   1.1  gdamore 
    521   1.1  gdamore 	link = hci_link_lookup_bdaddr(unit, &ep.bdaddr, ep.link_type);
    522   1.1  gdamore 
    523   1.1  gdamore 	if (ep.status) {
    524   1.1  gdamore 		if (link != NULL) {
    525   1.1  gdamore 			switch (ep.status) {
    526   1.1  gdamore 			case 0x04: /* "Page Timeout" */
    527   1.1  gdamore 				err = EHOSTDOWN;
    528   1.1  gdamore 				break;
    529   1.1  gdamore 
    530   1.1  gdamore 			case 0x08: /* "Connection Timed Out" */
    531   1.1  gdamore 				err = ETIMEDOUT;
    532   1.1  gdamore 				break;
    533   1.1  gdamore 
    534   1.1  gdamore 			case 0x16: /* "Connection Terminated by Local Host" */
    535   1.1  gdamore 				err = 0;
    536   1.1  gdamore 				break;
    537   1.1  gdamore 
    538   1.1  gdamore 			default:
    539   1.1  gdamore 				err = ECONNREFUSED;
    540   1.1  gdamore 				break;
    541   1.1  gdamore 			}
    542   1.1  gdamore 
    543   1.1  gdamore 			hci_link_free(link, err);
    544   1.1  gdamore 		}
    545   1.1  gdamore 
    546   1.1  gdamore 		return;
    547   1.1  gdamore 	}
    548   1.1  gdamore 
    549   1.1  gdamore 	if (link == NULL) {
    550   1.1  gdamore 		hci_discon_cp dp;
    551   1.1  gdamore 
    552   1.1  gdamore 		dp.con_handle = ep.con_handle;
    553   1.1  gdamore 		dp.reason = 0x13; /* "Remote User Terminated Connection" */
    554   1.1  gdamore 
    555   1.1  gdamore 		hci_send_cmd(unit, HCI_CMD_DISCONNECT, &dp, sizeof(dp));
    556   1.1  gdamore 		return;
    557   1.1  gdamore 	}
    558   1.1  gdamore 
    559   1.6   plunky 	/* XXX could check auth_enable here */
    560   1.6   plunky 
    561   1.6   plunky 	if (ep.encryption_mode)
    562   1.6   plunky 		link->hl_flags |= (HCI_LINK_AUTH | HCI_LINK_ENCRYPT);
    563   1.6   plunky 
    564   1.1  gdamore 	link->hl_state = HCI_LINK_OPEN;
    565   1.1  gdamore 	link->hl_handle = HCI_CON_HANDLE(le16toh(ep.con_handle));
    566   1.1  gdamore 
    567   1.1  gdamore 	if (ep.link_type == HCI_LINK_ACL) {
    568   1.1  gdamore 		cp.con_handle = ep.con_handle;
    569   1.1  gdamore 		cp.settings = htole16(unit->hci_link_policy);
    570   1.1  gdamore 		err = hci_send_cmd(unit, HCI_CMD_WRITE_LINK_POLICY_SETTINGS,
    571   1.1  gdamore 						&cp, sizeof(cp));
    572   1.1  gdamore 		if (err)
    573  1.10   plunky 			aprint_error_dev(unit->hci_dev,
    574  1.10   plunky 			    "Warning, could not write link policy\n");
    575   1.1  gdamore 
    576   1.9   plunky 		err = hci_send_cmd(unit, HCI_CMD_READ_CLOCK_OFFSET,
    577   1.9   plunky 				    &cp.con_handle, sizeof(cp.con_handle));
    578   1.9   plunky 		if (err)
    579  1.10   plunky 			aprint_error_dev(unit->hci_dev,
    580  1.10   plunky 			    "Warning, could not read clock offset\n");
    581   1.9   plunky 
    582   1.6   plunky 		err = hci_acl_setmode(link);
    583   1.6   plunky 		if (err == EINPROGRESS)
    584   1.6   plunky 			return;
    585   1.6   plunky 
    586   1.6   plunky 		hci_acl_linkmode(link);
    587   1.1  gdamore 	} else {
    588   1.1  gdamore 		(*link->hl_sco->sp_proto->connected)(link->hl_sco->sp_upper);
    589   1.1  gdamore 	}
    590   1.1  gdamore }
    591   1.1  gdamore 
    592   1.1  gdamore /*
    593   1.1  gdamore  * Disconnection Complete
    594   1.1  gdamore  *
    595   1.1  gdamore  * This is sent in response to a disconnection request, but also if
    596   1.1  gdamore  * the remote device goes out of range.
    597   1.1  gdamore  */
    598   1.1  gdamore static void
    599   1.1  gdamore hci_event_discon_compl(struct hci_unit *unit, struct mbuf *m)
    600   1.1  gdamore {
    601   1.1  gdamore 	hci_discon_compl_ep ep;
    602   1.1  gdamore 	struct hci_link *link;
    603   1.1  gdamore 
    604   1.1  gdamore 	KASSERT(m->m_pkthdr.len >= sizeof(ep));
    605   1.1  gdamore 	m_copydata(m, 0, sizeof(ep), &ep);
    606   1.1  gdamore 	m_adj(m, sizeof(ep));
    607   1.1  gdamore 
    608   1.1  gdamore 	ep.con_handle = le16toh(ep.con_handle);
    609   1.1  gdamore 
    610   1.1  gdamore 	DPRINTFN(1, "handle #%d, status=0x%x\n", ep.con_handle, ep.status);
    611   1.1  gdamore 
    612   1.1  gdamore 	link = hci_link_lookup_handle(unit, HCI_CON_HANDLE(ep.con_handle));
    613   1.1  gdamore 	if (link)
    614   1.1  gdamore 		hci_link_free(link, ENOLINK);
    615   1.1  gdamore }
    616   1.1  gdamore 
    617   1.1  gdamore /*
    618   1.1  gdamore  * Connect Request
    619   1.1  gdamore  *
    620   1.1  gdamore  * We check upstream for appropriate listeners and accept connections
    621   1.1  gdamore  * that are wanted.
    622   1.1  gdamore  */
    623   1.1  gdamore static void
    624   1.1  gdamore hci_event_con_req(struct hci_unit *unit, struct mbuf *m)
    625   1.1  gdamore {
    626   1.1  gdamore 	hci_con_req_ep ep;
    627   1.1  gdamore 	hci_accept_con_cp ap;
    628   1.1  gdamore 	hci_reject_con_cp rp;
    629   1.1  gdamore 	struct hci_link *link;
    630   1.1  gdamore 
    631   1.1  gdamore 	KASSERT(m->m_pkthdr.len >= sizeof(ep));
    632   1.1  gdamore 	m_copydata(m, 0, sizeof(ep), &ep);
    633   1.1  gdamore 	m_adj(m, sizeof(ep));
    634   1.1  gdamore 
    635   1.1  gdamore 	DPRINTFN(1, "bdaddr %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x "
    636   1.1  gdamore 		"class %2.2x%2.2x%2.2x type %s\n",
    637   1.1  gdamore 		ep.bdaddr.b[5], ep.bdaddr.b[4], ep.bdaddr.b[3],
    638   1.1  gdamore 		ep.bdaddr.b[2], ep.bdaddr.b[1], ep.bdaddr.b[0],
    639   1.1  gdamore 		ep.uclass[0], ep.uclass[1], ep.uclass[2],
    640   1.1  gdamore 		ep.link_type == HCI_LINK_ACL ? "ACL" : "SCO");
    641   1.1  gdamore 
    642   1.1  gdamore 	if (ep.link_type == HCI_LINK_ACL)
    643   1.1  gdamore 		link = hci_acl_newconn(unit, &ep.bdaddr);
    644   1.1  gdamore 	else
    645   1.1  gdamore 		link = hci_sco_newconn(unit, &ep.bdaddr);
    646   1.1  gdamore 
    647   1.1  gdamore 	if (link == NULL) {
    648   1.1  gdamore 		memset(&rp, 0, sizeof(rp));
    649   1.1  gdamore 		bdaddr_copy(&rp.bdaddr, &ep.bdaddr);
    650   1.1  gdamore 		rp.reason = 0x0f;	/* Unacceptable BD_ADDR */
    651   1.1  gdamore 
    652   1.1  gdamore 		hci_send_cmd(unit, HCI_CMD_REJECT_CON, &rp, sizeof(rp));
    653   1.1  gdamore 	} else {
    654   1.1  gdamore 		memset(&ap, 0, sizeof(ap));
    655   1.1  gdamore 		bdaddr_copy(&ap.bdaddr, &ep.bdaddr);
    656   1.1  gdamore 		if (unit->hci_link_policy & HCI_LINK_POLICY_ENABLE_ROLE_SWITCH)
    657   1.1  gdamore 			ap.role = HCI_ROLE_MASTER;
    658   1.1  gdamore 		else
    659   1.1  gdamore 			ap.role = HCI_ROLE_SLAVE;
    660   1.1  gdamore 
    661   1.1  gdamore 		hci_send_cmd(unit, HCI_CMD_ACCEPT_CON, &ap, sizeof(ap));
    662   1.1  gdamore 	}
    663   1.1  gdamore }
    664   1.1  gdamore 
    665   1.1  gdamore /*
    666   1.6   plunky  * Auth Complete
    667   1.6   plunky  *
    668   1.6   plunky  * Authentication has been completed on an ACL link. We can notify the
    669   1.6   plunky  * upper layer protocols unless further mode changes are pending.
    670   1.6   plunky  */
    671   1.6   plunky static void
    672   1.6   plunky hci_event_auth_compl(struct hci_unit *unit, struct mbuf *m)
    673   1.6   plunky {
    674   1.6   plunky 	hci_auth_compl_ep ep;
    675   1.6   plunky 	struct hci_link *link;
    676   1.6   plunky 	int err;
    677   1.6   plunky 
    678   1.6   plunky 	KASSERT(m->m_pkthdr.len >= sizeof(ep));
    679   1.6   plunky 	m_copydata(m, 0, sizeof(ep), &ep);
    680   1.6   plunky 	m_adj(m, sizeof(ep));
    681   1.6   plunky 
    682   1.6   plunky 	ep.con_handle = HCI_CON_HANDLE(le16toh(ep.con_handle));
    683   1.6   plunky 
    684   1.6   plunky 	DPRINTFN(1, "handle #%d, status=0x%x\n", ep.con_handle, ep.status);
    685   1.6   plunky 
    686   1.6   plunky 	link = hci_link_lookup_handle(unit, ep.con_handle);
    687   1.6   plunky 	if (link == NULL || link->hl_type != HCI_LINK_ACL)
    688   1.6   plunky 		return;
    689   1.6   plunky 
    690   1.6   plunky 	if (ep.status == 0) {
    691   1.6   plunky 		link->hl_flags |= HCI_LINK_AUTH;
    692   1.6   plunky 
    693   1.6   plunky 		if (link->hl_state == HCI_LINK_WAIT_AUTH)
    694   1.6   plunky 			link->hl_state = HCI_LINK_OPEN;
    695   1.6   plunky 
    696   1.6   plunky 		err = hci_acl_setmode(link);
    697   1.6   plunky 		if (err == EINPROGRESS)
    698   1.6   plunky 			return;
    699   1.6   plunky 	}
    700   1.6   plunky 
    701   1.6   plunky 	hci_acl_linkmode(link);
    702   1.6   plunky }
    703   1.6   plunky 
    704   1.6   plunky /*
    705   1.6   plunky  * Encryption Change
    706   1.6   plunky  *
    707   1.6   plunky  * The encryption status has changed. Basically, we note the change
    708   1.6   plunky  * then notify the upper layer protocol unless further mode changes
    709   1.6   plunky  * are pending.
    710   1.6   plunky  * Note that if encryption gets disabled when it has been requested,
    711   1.6   plunky  * we will attempt to enable it again.. (its a feature not a bug :)
    712   1.6   plunky  */
    713   1.6   plunky static void
    714   1.6   plunky hci_event_encryption_change(struct hci_unit *unit, struct mbuf *m)
    715   1.6   plunky {
    716   1.6   plunky 	hci_encryption_change_ep ep;
    717   1.6   plunky 	struct hci_link *link;
    718   1.6   plunky 	int err;
    719   1.6   plunky 
    720   1.6   plunky 	KASSERT(m->m_pkthdr.len >= sizeof(ep));
    721   1.6   plunky 	m_copydata(m, 0, sizeof(ep), &ep);
    722   1.6   plunky 	m_adj(m, sizeof(ep));
    723   1.6   plunky 
    724   1.6   plunky 	ep.con_handle = HCI_CON_HANDLE(le16toh(ep.con_handle));
    725   1.6   plunky 
    726   1.6   plunky 	DPRINTFN(1, "handle #%d, status=0x%x, encryption_enable=0x%x\n",
    727   1.6   plunky 		 ep.con_handle, ep.status, ep.encryption_enable);
    728   1.6   plunky 
    729   1.6   plunky 	link = hci_link_lookup_handle(unit, ep.con_handle);
    730   1.6   plunky 	if (link == NULL || link->hl_type != HCI_LINK_ACL)
    731   1.6   plunky 		return;
    732   1.6   plunky 
    733   1.6   plunky 	if (ep.status == 0) {
    734   1.6   plunky 		if (ep.encryption_enable == 0)
    735   1.6   plunky 			link->hl_flags &= ~HCI_LINK_ENCRYPT;
    736   1.6   plunky 		else
    737   1.6   plunky 			link->hl_flags |= (HCI_LINK_AUTH | HCI_LINK_ENCRYPT);
    738   1.6   plunky 
    739   1.6   plunky 		if (link->hl_state == HCI_LINK_WAIT_ENCRYPT)
    740   1.6   plunky 			link->hl_state = HCI_LINK_OPEN;
    741   1.6   plunky 
    742   1.6   plunky 		err = hci_acl_setmode(link);
    743   1.6   plunky 		if (err == EINPROGRESS)
    744   1.6   plunky 			return;
    745   1.6   plunky 	}
    746   1.6   plunky 
    747   1.6   plunky 	hci_acl_linkmode(link);
    748   1.6   plunky }
    749   1.6   plunky 
    750   1.6   plunky /*
    751   1.6   plunky  * Change Connection Link Key Complete
    752   1.6   plunky  *
    753   1.6   plunky  * Link keys are handled in userland but if we are waiting to secure
    754   1.6   plunky  * this link, we should notify the upper protocols. A SECURE request
    755   1.6   plunky  * only needs a single key change, so we can cancel the request.
    756   1.6   plunky  */
    757   1.6   plunky static void
    758   1.6   plunky hci_event_change_con_link_key_compl(struct hci_unit *unit, struct mbuf *m)
    759   1.6   plunky {
    760   1.6   plunky 	hci_change_con_link_key_compl_ep ep;
    761   1.6   plunky 	struct hci_link *link;
    762   1.6   plunky 	int err;
    763   1.6   plunky 
    764   1.6   plunky 	KASSERT(m->m_pkthdr.len >= sizeof(ep));
    765   1.6   plunky 	m_copydata(m, 0, sizeof(ep), &ep);
    766   1.6   plunky 	m_adj(m, sizeof(ep));
    767   1.6   plunky 
    768   1.6   plunky 	ep.con_handle = HCI_CON_HANDLE(le16toh(ep.con_handle));
    769   1.6   plunky 
    770   1.6   plunky 	DPRINTFN(1, "handle #%d, status=0x%x\n", ep.con_handle, ep.status);
    771   1.6   plunky 
    772   1.6   plunky 	link = hci_link_lookup_handle(unit, ep.con_handle);
    773   1.6   plunky 	if (link == NULL || link->hl_type != HCI_LINK_ACL)
    774   1.6   plunky 		return;
    775   1.6   plunky 
    776   1.6   plunky 	link->hl_flags &= ~HCI_LINK_SECURE_REQ;
    777   1.6   plunky 
    778   1.6   plunky 	if (ep.status == 0) {
    779   1.6   plunky 		link->hl_flags |= (HCI_LINK_AUTH | HCI_LINK_SECURE);
    780   1.6   plunky 
    781   1.6   plunky 		if (link->hl_state == HCI_LINK_WAIT_SECURE)
    782   1.6   plunky 			link->hl_state = HCI_LINK_OPEN;
    783   1.6   plunky 
    784   1.6   plunky 		err = hci_acl_setmode(link);
    785   1.6   plunky 		if (err == EINPROGRESS)
    786   1.6   plunky 			return;
    787   1.6   plunky 	}
    788   1.6   plunky 
    789   1.6   plunky 	hci_acl_linkmode(link);
    790   1.6   plunky }
    791   1.6   plunky 
    792   1.6   plunky /*
    793   1.9   plunky  * Read Clock Offset Complete
    794   1.9   plunky  *
    795   1.9   plunky  * We keep a note of the clock offset of remote devices when a
    796   1.9   plunky  * link is made, in order to facilitate reconnections to the device
    797   1.9   plunky  */
    798   1.9   plunky static void
    799   1.9   plunky hci_event_read_clock_offset_compl(struct hci_unit *unit, struct mbuf *m)
    800   1.9   plunky {
    801   1.9   plunky 	hci_read_clock_offset_compl_ep ep;
    802   1.9   plunky 	struct hci_link *link;
    803   1.9   plunky 
    804   1.9   plunky 	KASSERT(m->m_pkthdr.len >= sizeof(ep));
    805   1.9   plunky 	m_copydata(m, 0, sizeof(ep), &ep);
    806   1.9   plunky 	m_adj(m, sizeof(ep));
    807   1.9   plunky 
    808   1.9   plunky 	DPRINTFN(1, "handle #%d, offset=%u, status=0x%x\n",
    809   1.9   plunky 		le16toh(ep.con_handle), le16toh(ep.clock_offset), ep.status);
    810   1.9   plunky 
    811   1.9   plunky 	ep.con_handle = HCI_CON_HANDLE(le16toh(ep.con_handle));
    812   1.9   plunky 	link = hci_link_lookup_handle(unit, ep.con_handle);
    813   1.9   plunky 
    814   1.9   plunky 	if (ep.status != 0 || link == NULL)
    815   1.9   plunky 		return;
    816   1.9   plunky 
    817   1.9   plunky 	link->hl_clock = ep.clock_offset;
    818   1.9   plunky }
    819   1.9   plunky 
    820   1.9   plunky /*
    821   1.1  gdamore  * process results of read_bdaddr command_complete event
    822   1.1  gdamore  */
    823   1.1  gdamore static void
    824   1.1  gdamore hci_cmd_read_bdaddr(struct hci_unit *unit, struct mbuf *m)
    825   1.1  gdamore {
    826   1.1  gdamore 	hci_read_bdaddr_rp rp;
    827   1.1  gdamore 
    828   1.1  gdamore 	KASSERT(m->m_pkthdr.len >= sizeof(rp));
    829   1.1  gdamore 	m_copydata(m, 0, sizeof(rp), &rp);
    830   1.1  gdamore 	m_adj(m, sizeof(rp));
    831   1.1  gdamore 
    832   1.1  gdamore 	if (rp.status > 0)
    833   1.1  gdamore 		return;
    834   1.1  gdamore 
    835   1.1  gdamore 	if ((unit->hci_flags & BTF_INIT_BDADDR) == 0)
    836   1.1  gdamore 		return;
    837   1.1  gdamore 
    838   1.1  gdamore 	bdaddr_copy(&unit->hci_bdaddr, &rp.bdaddr);
    839   1.1  gdamore 
    840   1.1  gdamore 	unit->hci_flags &= ~BTF_INIT_BDADDR;
    841   1.1  gdamore 
    842   1.1  gdamore 	wakeup(unit);
    843   1.1  gdamore }
    844   1.1  gdamore 
    845   1.1  gdamore /*
    846   1.1  gdamore  * process results of read_buffer_size command_complete event
    847   1.1  gdamore  */
    848   1.1  gdamore static void
    849   1.1  gdamore hci_cmd_read_buffer_size(struct hci_unit *unit, struct mbuf *m)
    850   1.1  gdamore {
    851   1.1  gdamore 	hci_read_buffer_size_rp rp;
    852   1.1  gdamore 
    853   1.1  gdamore 	KASSERT(m->m_pkthdr.len >= sizeof(rp));
    854   1.1  gdamore 	m_copydata(m, 0, sizeof(rp), &rp);
    855   1.1  gdamore 	m_adj(m, sizeof(rp));
    856   1.1  gdamore 
    857   1.1  gdamore 	if (rp.status > 0)
    858   1.1  gdamore 		return;
    859   1.1  gdamore 
    860   1.1  gdamore 	if ((unit->hci_flags & BTF_INIT_BUFFER_SIZE) == 0)
    861   1.1  gdamore 		return;
    862   1.1  gdamore 
    863   1.1  gdamore 	unit->hci_max_acl_size = le16toh(rp.max_acl_size);
    864   1.1  gdamore 	unit->hci_num_acl_pkts = le16toh(rp.num_acl_pkts);
    865   1.1  gdamore 	unit->hci_max_sco_size = rp.max_sco_size;
    866   1.1  gdamore 	unit->hci_num_sco_pkts = le16toh(rp.num_sco_pkts);
    867   1.1  gdamore 
    868   1.1  gdamore 	unit->hci_flags &= ~BTF_INIT_BUFFER_SIZE;
    869   1.1  gdamore 
    870   1.1  gdamore 	wakeup(unit);
    871   1.1  gdamore }
    872   1.1  gdamore 
    873   1.1  gdamore /*
    874   1.1  gdamore  * process results of read_local_features command_complete event
    875   1.1  gdamore  */
    876   1.1  gdamore static void
    877   1.1  gdamore hci_cmd_read_local_features(struct hci_unit *unit, struct mbuf *m)
    878   1.1  gdamore {
    879   1.1  gdamore 	hci_read_local_features_rp rp;
    880   1.1  gdamore 
    881   1.1  gdamore 	KASSERT(m->m_pkthdr.len >= sizeof(rp));
    882   1.1  gdamore 	m_copydata(m, 0, sizeof(rp), &rp);
    883   1.1  gdamore 	m_adj(m, sizeof(rp));
    884   1.1  gdamore 
    885   1.1  gdamore 	if (rp.status > 0)
    886   1.1  gdamore 		return;
    887   1.1  gdamore 
    888   1.1  gdamore 	if ((unit->hci_flags & BTF_INIT_FEATURES) == 0)
    889   1.1  gdamore 		return;
    890   1.1  gdamore 
    891   1.1  gdamore 	unit->hci_lmp_mask = 0;
    892   1.1  gdamore 
    893   1.1  gdamore 	if (rp.features[0] & HCI_LMP_ROLE_SWITCH)
    894   1.1  gdamore 		unit->hci_lmp_mask |= HCI_LINK_POLICY_ENABLE_ROLE_SWITCH;
    895   1.1  gdamore 
    896   1.1  gdamore 	if (rp.features[0] & HCI_LMP_HOLD_MODE)
    897   1.1  gdamore 		unit->hci_lmp_mask |= HCI_LINK_POLICY_ENABLE_HOLD_MODE;
    898   1.1  gdamore 
    899   1.1  gdamore 	if (rp.features[0] & HCI_LMP_SNIFF_MODE)
    900   1.1  gdamore 		unit->hci_lmp_mask |= HCI_LINK_POLICY_ENABLE_SNIFF_MODE;
    901   1.1  gdamore 
    902   1.1  gdamore 	if (rp.features[1] & HCI_LMP_PARK_MODE)
    903   1.1  gdamore 		unit->hci_lmp_mask |= HCI_LINK_POLICY_ENABLE_PARK_MODE;
    904   1.1  gdamore 
    905   1.1  gdamore 	/* ACL packet mask */
    906   1.1  gdamore 	unit->hci_acl_mask = HCI_PKT_DM1 | HCI_PKT_DH1;
    907   1.1  gdamore 
    908   1.1  gdamore 	if (rp.features[0] & HCI_LMP_3SLOT)
    909   1.1  gdamore 		unit->hci_acl_mask |= HCI_PKT_DM3 | HCI_PKT_DH3;
    910   1.1  gdamore 
    911   1.1  gdamore 	if (rp.features[0] & HCI_LMP_5SLOT)
    912   1.1  gdamore 		unit->hci_acl_mask |= HCI_PKT_DM5 | HCI_PKT_DH5;
    913   1.1  gdamore 
    914   1.1  gdamore 	if ((rp.features[3] & HCI_LMP_EDR_ACL_2MBPS) == 0)
    915   1.1  gdamore 		unit->hci_acl_mask |= HCI_PKT_2MBPS_DH1
    916   1.1  gdamore 				    | HCI_PKT_2MBPS_DH3
    917   1.1  gdamore 				    | HCI_PKT_2MBPS_DH5;
    918   1.1  gdamore 
    919   1.1  gdamore 	if ((rp.features[3] & HCI_LMP_EDR_ACL_3MBPS) == 0)
    920   1.1  gdamore 		unit->hci_acl_mask |= HCI_PKT_3MBPS_DH1
    921   1.1  gdamore 				    | HCI_PKT_3MBPS_DH3
    922   1.1  gdamore 				    | HCI_PKT_3MBPS_DH5;
    923   1.1  gdamore 
    924   1.1  gdamore 	if ((rp.features[4] & HCI_LMP_3SLOT_EDR_ACL) == 0)
    925   1.1  gdamore 		unit->hci_acl_mask |= HCI_PKT_2MBPS_DH3
    926   1.1  gdamore 				    | HCI_PKT_3MBPS_DH3;
    927   1.1  gdamore 
    928   1.1  gdamore 	if ((rp.features[5] & HCI_LMP_5SLOT_EDR_ACL) == 0)
    929   1.1  gdamore 		unit->hci_acl_mask |= HCI_PKT_2MBPS_DH5
    930   1.1  gdamore 				    | HCI_PKT_3MBPS_DH5;
    931   1.1  gdamore 
    932   1.1  gdamore 	unit->hci_packet_type = unit->hci_acl_mask;
    933   1.1  gdamore 
    934   1.1  gdamore 	/* SCO packet mask */
    935   1.1  gdamore 	unit->hci_sco_mask = 0;
    936   1.1  gdamore 	if (rp.features[1] & HCI_LMP_SCO_LINK)
    937   1.1  gdamore 		unit->hci_sco_mask |= HCI_PKT_HV1;
    938   1.1  gdamore 
    939   1.1  gdamore 	if (rp.features[1] & HCI_LMP_HV2_PKT)
    940   1.1  gdamore 		unit->hci_sco_mask |= HCI_PKT_HV2;
    941   1.1  gdamore 
    942   1.1  gdamore 	if (rp.features[1] & HCI_LMP_HV3_PKT)
    943   1.1  gdamore 		unit->hci_sco_mask |= HCI_PKT_HV3;
    944   1.1  gdamore 
    945   1.1  gdamore 	if (rp.features[3] & HCI_LMP_EV3_PKT)
    946   1.1  gdamore 		unit->hci_sco_mask |= HCI_PKT_EV3;
    947   1.1  gdamore 
    948   1.1  gdamore 	if (rp.features[4] & HCI_LMP_EV4_PKT)
    949   1.1  gdamore 		unit->hci_sco_mask |= HCI_PKT_EV4;
    950   1.1  gdamore 
    951   1.1  gdamore 	if (rp.features[4] & HCI_LMP_EV5_PKT)
    952   1.1  gdamore 		unit->hci_sco_mask |= HCI_PKT_EV5;
    953   1.1  gdamore 
    954   1.4   plunky 	/* XXX what do 2MBPS/3MBPS/3SLOT eSCO mean? */
    955   1.1  gdamore 
    956   1.1  gdamore 	unit->hci_flags &= ~BTF_INIT_FEATURES;
    957   1.1  gdamore 
    958   1.1  gdamore 	wakeup(unit);
    959   1.1  gdamore 
    960   1.1  gdamore 	DPRINTFN(1, "%s: lmp_mask %4.4x, acl_mask %4.4x, sco_mask %4.4x\n",
    961  1.10   plunky 		device_xname(unit->hci_dev), unit->hci_lmp_mask,
    962   1.1  gdamore 		unit->hci_acl_mask, unit->hci_sco_mask);
    963   1.1  gdamore }
    964   1.1  gdamore 
    965   1.1  gdamore /*
    966  1.13   plunky  * process results of read_local_ver command_complete event
    967  1.13   plunky  *
    968  1.13   plunky  * reading local supported commands is only supported from 1.2 spec
    969  1.13   plunky  */
    970  1.13   plunky static void
    971  1.13   plunky hci_cmd_read_local_ver(struct hci_unit *unit, struct mbuf *m)
    972  1.13   plunky {
    973  1.13   plunky 	hci_read_local_ver_rp rp;
    974  1.13   plunky 
    975  1.13   plunky 	KASSERT(m->m_pkthdr.len >= sizeof(rp));
    976  1.13   plunky 	m_copydata(m, 0, sizeof(rp), &rp);
    977  1.13   plunky 	m_adj(m, sizeof(rp));
    978  1.13   plunky 
    979  1.13   plunky 	if (rp.status != 0)
    980  1.13   plunky 		return;
    981  1.13   plunky 
    982  1.13   plunky 	if ((unit->hci_flags & BTF_INIT_COMMANDS) == 0)
    983  1.13   plunky 		return;
    984  1.13   plunky 
    985  1.13   plunky 	if (rp.hci_version < HCI_SPEC_V12) {
    986  1.13   plunky 		unit->hci_flags &= ~BTF_INIT_COMMANDS;
    987  1.13   plunky 		wakeup(unit);
    988  1.13   plunky 		return;
    989  1.13   plunky 	}
    990  1.13   plunky 
    991  1.13   plunky 	hci_send_cmd(unit, HCI_CMD_READ_LOCAL_COMMANDS, NULL, 0);
    992  1.13   plunky }
    993  1.13   plunky 
    994  1.13   plunky /*
    995  1.13   plunky  * process results of read_local_commands command_complete event
    996  1.13   plunky  */
    997  1.13   plunky static void
    998  1.13   plunky hci_cmd_read_local_commands(struct hci_unit *unit, struct mbuf *m)
    999  1.13   plunky {
   1000  1.13   plunky 	hci_read_local_commands_rp rp;
   1001  1.13   plunky 
   1002  1.13   plunky 	KASSERT(m->m_pkthdr.len >= sizeof(rp));
   1003  1.13   plunky 	m_copydata(m, 0, sizeof(rp), &rp);
   1004  1.13   plunky 	m_adj(m, sizeof(rp));
   1005  1.13   plunky 
   1006  1.13   plunky 	if (rp.status != 0)
   1007  1.13   plunky 		return;
   1008  1.13   plunky 
   1009  1.13   plunky 	if ((unit->hci_flags & BTF_INIT_COMMANDS) == 0)
   1010  1.13   plunky 		return;
   1011  1.13   plunky 
   1012  1.13   plunky 	unit->hci_flags &= ~BTF_INIT_COMMANDS;
   1013  1.13   plunky 	memcpy(unit->hci_cmds, rp.commands, HCI_COMMANDS_SIZE);
   1014  1.13   plunky 
   1015  1.13   plunky 	wakeup(unit);
   1016  1.13   plunky }
   1017  1.13   plunky 
   1018  1.13   plunky /*
   1019   1.1  gdamore  * process results of reset command_complete event
   1020   1.1  gdamore  *
   1021   1.1  gdamore  * This has killed all the connections, so close down anything we have left,
   1022   1.1  gdamore  * and reinitialise the unit.
   1023   1.1  gdamore  */
   1024   1.1  gdamore static void
   1025   1.1  gdamore hci_cmd_reset(struct hci_unit *unit, struct mbuf *m)
   1026   1.1  gdamore {
   1027   1.1  gdamore 	hci_reset_rp rp;
   1028   1.1  gdamore 	struct hci_link *link, *next;
   1029   1.1  gdamore 	int acl;
   1030   1.1  gdamore 
   1031   1.1  gdamore 	KASSERT(m->m_pkthdr.len >= sizeof(rp));
   1032   1.1  gdamore 	m_copydata(m, 0, sizeof(rp), &rp);
   1033   1.1  gdamore 	m_adj(m, sizeof(rp));
   1034   1.1  gdamore 
   1035   1.1  gdamore 	if (rp.status != 0)
   1036   1.1  gdamore 		return;
   1037   1.1  gdamore 
   1038   1.1  gdamore 	/*
   1039   1.1  gdamore 	 * release SCO links first, since they may be holding
   1040   1.1  gdamore 	 * an ACL link reference.
   1041   1.1  gdamore 	 */
   1042   1.1  gdamore 	for (acl = 0 ; acl < 2 ; acl++) {
   1043   1.1  gdamore 		next = TAILQ_FIRST(&unit->hci_links);
   1044   1.1  gdamore 		while ((link = next) != NULL) {
   1045   1.1  gdamore 			next = TAILQ_NEXT(link, hl_next);
   1046   1.1  gdamore 			if (acl || link->hl_type != HCI_LINK_ACL)
   1047   1.1  gdamore 				hci_link_free(link, ECONNABORTED);
   1048   1.1  gdamore 		}
   1049   1.1  gdamore 	}
   1050   1.1  gdamore 
   1051   1.1  gdamore 	unit->hci_num_acl_pkts = 0;
   1052   1.1  gdamore 	unit->hci_num_sco_pkts = 0;
   1053   1.1  gdamore 
   1054   1.1  gdamore 	if (hci_send_cmd(unit, HCI_CMD_READ_BDADDR, NULL, 0))
   1055   1.1  gdamore 		return;
   1056   1.1  gdamore 
   1057   1.1  gdamore 	if (hci_send_cmd(unit, HCI_CMD_READ_BUFFER_SIZE, NULL, 0))
   1058   1.1  gdamore 		return;
   1059   1.1  gdamore 
   1060   1.1  gdamore 	if (hci_send_cmd(unit, HCI_CMD_READ_LOCAL_FEATURES, NULL, 0))
   1061   1.1  gdamore 		return;
   1062  1.13   plunky 
   1063  1.13   plunky 	if (hci_send_cmd(unit, HCI_CMD_READ_LOCAL_VER, NULL, 0))
   1064  1.13   plunky 		return;
   1065   1.1  gdamore }
   1066  1.15   plunky 
   1067  1.15   plunky /*
   1068  1.15   plunky  * process command_status event for create_con command
   1069  1.15   plunky  *
   1070  1.15   plunky  * a "Create Connection" command can sometimes fail to start for whatever
   1071  1.15   plunky  * reason and the command_status event returns failure but we get no
   1072  1.15   plunky  * indication of which connection failed (for instance in the case where
   1073  1.15   plunky  * we tried to open too many connections all at once) So, we keep a flag
   1074  1.15   plunky  * on the link to indicate pending status until the command_status event
   1075  1.15   plunky  * is returned to help us decide which needs to be failed.
   1076  1.15   plunky  *
   1077  1.16   plunky  * since created links are inserted at the tail of hci_links, we know that
   1078  1.16   plunky  * the first pending link we find will be the one that this command status
   1079  1.16   plunky  * refers to.
   1080  1.15   plunky  */
   1081  1.15   plunky static void
   1082  1.15   plunky hci_cmd_create_con(struct hci_unit *unit, uint8_t status)
   1083  1.15   plunky {
   1084  1.15   plunky 	struct hci_link *link;
   1085  1.15   plunky 
   1086  1.15   plunky 	TAILQ_FOREACH(link, &unit->hci_links, hl_next) {
   1087  1.15   plunky 		if ((link->hl_flags & HCI_LINK_CREATE_CON) == 0)
   1088  1.15   plunky 			continue;
   1089  1.15   plunky 
   1090  1.15   plunky 		link->hl_flags &= ~HCI_LINK_CREATE_CON;
   1091  1.15   plunky 
   1092  1.15   plunky 		switch(status) {
   1093  1.15   plunky 		case 0x00:	/* success */
   1094  1.15   plunky 			break;
   1095  1.15   plunky 
   1096  1.15   plunky 		case 0x0c:	/* "Command Disallowed" */
   1097  1.15   plunky 			hci_link_free(link, EBUSY);
   1098  1.15   plunky 			break;
   1099  1.15   plunky 
   1100  1.15   plunky 		default:	/* some other trouble */
   1101  1.15   plunky 			hci_link_free(link, EPROTO);
   1102  1.15   plunky 			break;
   1103  1.15   plunky 		}
   1104  1.15   plunky 
   1105  1.15   plunky 		return;
   1106  1.15   plunky 	}
   1107  1.15   plunky }
   1108