in6_pcb.c revision 1.20 1 1.20 itojun /* $NetBSD: in6_pcb.c,v 1.20 2000/03/02 06:42:52 itojun Exp $ */
2 1.20 itojun /* $KAME: in6_pcb.c,v 1.34 2000/02/22 14:04:18 itojun Exp $ */
3 1.5 thorpej
4 1.2 itojun /*
5 1.2 itojun * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
6 1.2 itojun * All rights reserved.
7 1.2 itojun *
8 1.2 itojun * Redistribution and use in source and binary forms, with or without
9 1.2 itojun * modification, are permitted provided that the following conditions
10 1.2 itojun * are met:
11 1.2 itojun * 1. Redistributions of source code must retain the above copyright
12 1.2 itojun * notice, this list of conditions and the following disclaimer.
13 1.2 itojun * 2. Redistributions in binary form must reproduce the above copyright
14 1.2 itojun * notice, this list of conditions and the following disclaimer in the
15 1.2 itojun * documentation and/or other materials provided with the distribution.
16 1.2 itojun * 3. Neither the name of the project nor the names of its contributors
17 1.2 itojun * may be used to endorse or promote products derived from this software
18 1.2 itojun * without specific prior written permission.
19 1.2 itojun *
20 1.2 itojun * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
21 1.2 itojun * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 1.2 itojun * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 1.2 itojun * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
24 1.2 itojun * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
25 1.2 itojun * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
26 1.2 itojun * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
27 1.2 itojun * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
28 1.2 itojun * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
29 1.2 itojun * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30 1.2 itojun * SUCH DAMAGE.
31 1.2 itojun */
32 1.2 itojun
33 1.2 itojun /*
34 1.2 itojun * Copyright (c) 1982, 1986, 1991, 1993
35 1.2 itojun * The Regents of the University of California. All rights reserved.
36 1.2 itojun *
37 1.2 itojun * Redistribution and use in source and binary forms, with or without
38 1.2 itojun * modification, are permitted provided that the following conditions
39 1.2 itojun * are met:
40 1.2 itojun * 1. Redistributions of source code must retain the above copyright
41 1.2 itojun * notice, this list of conditions and the following disclaimer.
42 1.2 itojun * 2. Redistributions in binary form must reproduce the above copyright
43 1.2 itojun * notice, this list of conditions and the following disclaimer in the
44 1.2 itojun * documentation and/or other materials provided with the distribution.
45 1.2 itojun * 3. All advertising materials mentioning features or use of this software
46 1.2 itojun * must display the following acknowledgement:
47 1.2 itojun * This product includes software developed by the University of
48 1.2 itojun * California, Berkeley and its contributors.
49 1.2 itojun * 4. Neither the name of the University nor the names of its contributors
50 1.2 itojun * may be used to endorse or promote products derived from this software
51 1.2 itojun * without specific prior written permission.
52 1.2 itojun *
53 1.2 itojun * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
54 1.2 itojun * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
55 1.2 itojun * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
56 1.2 itojun * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
57 1.2 itojun * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
58 1.2 itojun * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
59 1.2 itojun * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
60 1.2 itojun * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
61 1.2 itojun * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
62 1.2 itojun * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
63 1.2 itojun * SUCH DAMAGE.
64 1.2 itojun *
65 1.2 itojun * @(#)in_pcb.c 8.2 (Berkeley) 1/4/94
66 1.2 itojun */
67 1.7 thorpej
68 1.7 thorpej #include "opt_ipsec.h"
69 1.2 itojun
70 1.2 itojun #include <sys/param.h>
71 1.2 itojun #include <sys/systm.h>
72 1.2 itojun #include <sys/malloc.h>
73 1.2 itojun #include <sys/mbuf.h>
74 1.2 itojun #include <sys/protosw.h>
75 1.2 itojun #include <sys/socket.h>
76 1.2 itojun #include <sys/socketvar.h>
77 1.2 itojun #include <sys/ioctl.h>
78 1.2 itojun #include <sys/errno.h>
79 1.2 itojun #include <sys/time.h>
80 1.2 itojun #include <sys/proc.h>
81 1.2 itojun
82 1.2 itojun #include <net/if.h>
83 1.2 itojun #include <net/route.h>
84 1.2 itojun
85 1.2 itojun #include <netinet/in.h>
86 1.2 itojun #include <netinet/in_var.h>
87 1.2 itojun #include <netinet/in_systm.h>
88 1.2 itojun #include <netinet/ip.h>
89 1.2 itojun #include <netinet/in_pcb.h>
90 1.19 itojun #include <netinet/ip6.h>
91 1.11 itojun #include <netinet6/ip6_var.h>
92 1.2 itojun #include <netinet6/in6_pcb.h>
93 1.2 itojun #include <netinet6/nd6.h>
94 1.2 itojun
95 1.2 itojun #include "loop.h"
96 1.2 itojun extern struct ifnet loif[NLOOP];
97 1.8 itojun #include "faith.h"
98 1.2 itojun
99 1.2 itojun #ifdef IPSEC
100 1.2 itojun #include <netinet6/ipsec.h>
101 1.2 itojun #include <netkey/key.h>
102 1.2 itojun #include <netkey/key_debug.h>
103 1.2 itojun #endif /* IPSEC */
104 1.2 itojun
105 1.2 itojun struct in6_addr zeroin6_addr;
106 1.2 itojun
107 1.2 itojun int
108 1.2 itojun in6_pcballoc(so, head)
109 1.2 itojun struct socket *so;
110 1.2 itojun struct in6pcb *head;
111 1.2 itojun {
112 1.2 itojun struct in6pcb *in6p;
113 1.2 itojun
114 1.2 itojun MALLOC(in6p, struct in6pcb *, sizeof(*in6p), M_PCB, M_NOWAIT);
115 1.2 itojun if (in6p == NULL)
116 1.2 itojun return(ENOBUFS);
117 1.2 itojun bzero((caddr_t)in6p, sizeof(*in6p));
118 1.2 itojun in6p->in6p_head = head;
119 1.2 itojun in6p->in6p_socket = so;
120 1.2 itojun in6p->in6p_hops = -1; /* use kernel default */
121 1.2 itojun in6p->in6p_icmp6filt = NULL;
122 1.3 itojun in6p->in6p_next = head->in6p_next;
123 1.3 itojun head->in6p_next = in6p;
124 1.3 itojun in6p->in6p_prev = head;
125 1.3 itojun in6p->in6p_next->in6p_prev = in6p;
126 1.12 itojun #ifndef INET6_BINDV6ONLY
127 1.11 itojun if (ip6_bindv6only)
128 1.11 itojun in6p->in6p_flags |= IN6P_BINDV6ONLY;
129 1.11 itojun #else
130 1.11 itojun in6p->in6p_flags |= IN6P_BINDV6ONLY; /*just for safety*/
131 1.11 itojun #endif
132 1.2 itojun so->so_pcb = (caddr_t)in6p;
133 1.2 itojun return(0);
134 1.2 itojun }
135 1.2 itojun
136 1.2 itojun int
137 1.2 itojun in6_pcbbind(in6p, nam)
138 1.2 itojun register struct in6pcb *in6p;
139 1.2 itojun struct mbuf *nam;
140 1.2 itojun {
141 1.2 itojun struct socket *so = in6p->in6p_socket;
142 1.2 itojun struct in6pcb *head = in6p->in6p_head;
143 1.2 itojun struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)NULL;
144 1.2 itojun struct proc *p = curproc; /* XXX */
145 1.18 itojun u_int16_t lport = 0;
146 1.2 itojun int wild = 0, reuseport = (so->so_options & SO_REUSEPORT);
147 1.2 itojun int error;
148 1.2 itojun
149 1.10 itojun if (in6p->in6p_lport || !IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_laddr))
150 1.2 itojun return(EINVAL);
151 1.2 itojun if ((so->so_options & (SO_REUSEADDR|SO_REUSEPORT)) == 0 &&
152 1.2 itojun ((so->so_proto->pr_flags & PR_CONNREQUIRED) == 0 ||
153 1.2 itojun (so->so_options & SO_ACCEPTCONN) == 0))
154 1.2 itojun wild = IN6PLOOKUP_WILDCARD;
155 1.2 itojun if (nam) {
156 1.2 itojun sin6 = mtod(nam, struct sockaddr_in6 *);
157 1.2 itojun if (nam->m_len != sizeof(*sin6))
158 1.2 itojun return(EINVAL);
159 1.2 itojun /*
160 1.2 itojun * We should check the family, but old programs
161 1.2 itojun * incorrectly fail to intialize it.
162 1.2 itojun */
163 1.2 itojun if (sin6->sin6_family != AF_INET6)
164 1.2 itojun return(EAFNOSUPPORT);
165 1.2 itojun
166 1.2 itojun /*
167 1.2 itojun * If the scope of the destination is link-local, embed the
168 1.2 itojun * interface index in the address.
169 1.2 itojun */
170 1.2 itojun if (IN6_IS_SCOPE_LINKLOCAL(&sin6->sin6_addr)) {
171 1.2 itojun /* XXX boundary check is assumed to be already done. */
172 1.2 itojun /* XXX sin6_scope_id is weaker than advanced-api. */
173 1.2 itojun struct in6_pktinfo *pi;
174 1.2 itojun if (in6p->in6p_outputopts &&
175 1.2 itojun (pi = in6p->in6p_outputopts->ip6po_pktinfo) &&
176 1.2 itojun pi->ipi6_ifindex) {
177 1.2 itojun sin6->sin6_addr.s6_addr16[1]
178 1.2 itojun = htons(pi->ipi6_ifindex);
179 1.2 itojun } else if (IN6_IS_ADDR_MULTICAST(&sin6->sin6_addr)
180 1.2 itojun && in6p->in6p_moptions
181 1.2 itojun && in6p->in6p_moptions->im6o_multicast_ifp) {
182 1.2 itojun sin6->sin6_addr.s6_addr16[1] =
183 1.2 itojun htons(in6p->in6p_moptions->im6o_multicast_ifp->if_index);
184 1.2 itojun } else if (sin6->sin6_scope_id) {
185 1.2 itojun /* boundary check */
186 1.2 itojun if (sin6->sin6_scope_id < 0
187 1.2 itojun || if_index < sin6->sin6_scope_id) {
188 1.2 itojun return ENXIO; /* XXX EINVAL? */
189 1.2 itojun }
190 1.2 itojun sin6->sin6_addr.s6_addr16[1]
191 1.2 itojun = htons(sin6->sin6_scope_id & 0xffff);/*XXX*/
192 1.2 itojun /* this must be cleared for ifa_ifwithaddr() */
193 1.2 itojun sin6->sin6_scope_id = 0;
194 1.2 itojun }
195 1.2 itojun }
196 1.2 itojun
197 1.2 itojun lport = sin6->sin6_port;
198 1.2 itojun if (IN6_IS_ADDR_MULTICAST(&sin6->sin6_addr)) {
199 1.2 itojun /*
200 1.2 itojun * Treat SO_REUSEADDR as SO_REUSEPORT for multicast;
201 1.2 itojun * allow compepte duplication of binding if
202 1.2 itojun * SO_REUSEPORT is set, or if SO_REUSEADDR is set
203 1.2 itojun * and a multicast address is bound on both
204 1.2 itojun * new and duplicated sockets.
205 1.2 itojun */
206 1.2 itojun if (so->so_options & SO_REUSEADDR)
207 1.2 itojun reuseport = SO_REUSEADDR|SO_REUSEPORT;
208 1.2 itojun } else if (IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr)) {
209 1.2 itojun struct sockaddr_in sin;
210 1.2 itojun
211 1.2 itojun bzero(&sin, sizeof(sin));
212 1.2 itojun sin.sin_len = sizeof(sin);
213 1.2 itojun sin.sin_family = AF_INET;
214 1.2 itojun bcopy(&sin6->sin6_addr.s6_addr32[3], &sin.sin_addr,
215 1.2 itojun sizeof(sin.sin_addr));
216 1.2 itojun if (ifa_ifwithaddr((struct sockaddr *)&sin) == 0)
217 1.2 itojun return EADDRNOTAVAIL;
218 1.10 itojun } else if (!IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr)) {
219 1.2 itojun struct ifaddr *ia = NULL;
220 1.2 itojun
221 1.2 itojun sin6->sin6_port = 0; /* yech... */
222 1.10 itojun #if defined(NFAITH) && NFAITH > 0
223 1.10 itojun if ((in6p->in6p_flags & IN6P_FAITH) == 0
224 1.10 itojun && (ia = ifa_ifwithaddr((struct sockaddr *)sin6)) == 0)
225 1.10 itojun #else
226 1.2 itojun if ((ia = ifa_ifwithaddr((struct sockaddr *)sin6)) == 0)
227 1.10 itojun #endif
228 1.2 itojun return(EADDRNOTAVAIL);
229 1.2 itojun
230 1.2 itojun /*
231 1.2 itojun * XXX: bind to an anycast address might accidentally
232 1.2 itojun * cause sending a packet with anycast source address.
233 1.2 itojun */
234 1.20 itojun if (ia &&
235 1.20 itojun ((struct in6_ifaddr *)ia)->ia6_flags &
236 1.20 itojun (IN6_IFF_ANYCAST|IN6_IFF_NOTREADY|
237 1.20 itojun IN6_IFF_DETACHED|IN6_IFF_DEPRECATED)) {
238 1.20 itojun return(EADDRNOTAVAIL);
239 1.2 itojun }
240 1.2 itojun }
241 1.2 itojun if (lport) {
242 1.13 itojun #ifndef IPNOPRIVPORTS
243 1.2 itojun /* GROSS */
244 1.2 itojun if (ntohs(lport) < IPV6PORT_RESERVED &&
245 1.13 itojun (p == 0 ||
246 1.13 itojun (error = suser(p->p_ucred, &p->p_acflag))))
247 1.2 itojun return(EACCES);
248 1.13 itojun #endif
249 1.2 itojun
250 1.2 itojun if (IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr)) {
251 1.2 itojun /* should check this but we can't ... */
252 1.2 itojun #if 0
253 1.2 itojun struct inpcb *t;
254 1.2 itojun
255 1.2 itojun t = in_pcblookup_bind(&tcbtable,
256 1.2 itojun (struct in_addr *)&sin6->sin6_addr.s6_addr32[3],
257 1.2 itojun lport);
258 1.2 itojun if (t && (reuseport & t->inp_socket->so_options) == 0)
259 1.2 itojun return EADDRINUSE;
260 1.2 itojun #endif
261 1.2 itojun } else {
262 1.2 itojun struct in6pcb *t;
263 1.2 itojun
264 1.2 itojun t = in6_pcblookup(head, &zeroin6_addr, 0,
265 1.2 itojun &sin6->sin6_addr, lport, wild);
266 1.2 itojun if (t && (reuseport & t->in6p_socket->so_options) == 0)
267 1.2 itojun return(EADDRINUSE);
268 1.2 itojun }
269 1.2 itojun }
270 1.2 itojun in6p->in6p_laddr = sin6->sin6_addr;
271 1.2 itojun }
272 1.10 itojun
273 1.2 itojun if (lport == 0) {
274 1.10 itojun int e;
275 1.10 itojun if ((e = in6_pcbsetport(&in6p->in6p_laddr, in6p)) != 0)
276 1.10 itojun return(e);
277 1.10 itojun }
278 1.10 itojun else
279 1.10 itojun in6p->in6p_lport = lport;
280 1.10 itojun
281 1.10 itojun in6p->in6p_flowinfo = sin6 ? sin6->sin6_flowinfo : 0; /*XXX*/
282 1.10 itojun return(0);
283 1.10 itojun }
284 1.10 itojun
285 1.10 itojun /*
286 1.10 itojun * Find an empty port and set it to the specified PCB.
287 1.10 itojun */
288 1.10 itojun int
289 1.10 itojun in6_pcbsetport(laddr, in6p)
290 1.10 itojun struct in6_addr *laddr;
291 1.10 itojun struct in6pcb *in6p;
292 1.10 itojun {
293 1.10 itojun struct socket *so = in6p->in6p_socket;
294 1.10 itojun struct in6pcb *head = in6p->in6p_head;
295 1.18 itojun u_int16_t last_port, lport = 0;
296 1.10 itojun int wild = 0;
297 1.10 itojun void *t;
298 1.18 itojun u_int16_t min, max;
299 1.13 itojun #ifndef IPNOPRIVPORTS
300 1.13 itojun struct proc *p = curproc; /*XXX*/
301 1.13 itojun #endif
302 1.2 itojun
303 1.10 itojun /* XXX: this is redundant when called from in6_pcbbind */
304 1.10 itojun if ((so->so_options & (SO_REUSEADDR|SO_REUSEPORT)) == 0 &&
305 1.10 itojun ((so->so_proto->pr_flags & PR_CONNREQUIRED) == 0 ||
306 1.10 itojun (so->so_options & SO_ACCEPTCONN) == 0))
307 1.10 itojun wild = IN6PLOOKUP_WILDCARD;
308 1.2 itojun
309 1.13 itojun if (in6p->in6p_flags & IN6P_LOWPORT) {
310 1.13 itojun #ifndef IPNOPRIVPORTS
311 1.20 itojun if (p == 0 || (suser(p->p_ucred, &p->p_acflag) != 0))
312 1.13 itojun return (EACCES);
313 1.13 itojun #endif
314 1.13 itojun min = IPV6PORT_RESERVEDMIN;
315 1.13 itojun max = IPV6PORT_RESERVEDMAX;
316 1.13 itojun } else {
317 1.13 itojun min = IPV6PORT_ANONMIN;
318 1.13 itojun max = IPV6PORT_ANONMAX;
319 1.13 itojun }
320 1.13 itojun
321 1.10 itojun /* value out of range */
322 1.13 itojun if (head->in6p_lport < min)
323 1.13 itojun head->in6p_lport = min;
324 1.13 itojun else if (head->in6p_lport > max)
325 1.13 itojun head->in6p_lport = min;
326 1.10 itojun last_port = head->in6p_lport;
327 1.10 itojun goto startover; /*to randomize*/
328 1.10 itojun for (;;) {
329 1.10 itojun lport = htons(head->in6p_lport);
330 1.10 itojun if (IN6_IS_ADDR_V4MAPPED(laddr)) {
331 1.2 itojun #if 0
332 1.10 itojun t = in_pcblookup_bind(&tcbtable,
333 1.10 itojun (struct in_addr *)&in6p->in6p_laddr.s6_addr32[3],
334 1.10 itojun lport);
335 1.2 itojun #else
336 1.10 itojun t = NULL;
337 1.2 itojun #endif
338 1.10 itojun } else {
339 1.10 itojun t = in6_pcblookup(head, &zeroin6_addr, 0, laddr,
340 1.10 itojun lport, wild);
341 1.2 itojun }
342 1.10 itojun if (t == 0)
343 1.10 itojun break;
344 1.10 itojun startover:
345 1.13 itojun if (head->in6p_lport >= max)
346 1.13 itojun head->in6p_lport = min;
347 1.10 itojun else
348 1.10 itojun head->in6p_lport++;
349 1.10 itojun if (head->in6p_lport == last_port)
350 1.10 itojun return (EADDRINUSE);
351 1.2 itojun }
352 1.10 itojun
353 1.2 itojun in6p->in6p_lport = lport;
354 1.10 itojun return(0); /* success */
355 1.2 itojun }
356 1.2 itojun
357 1.2 itojun /*
358 1.2 itojun * Connect from a socket to a specified address.
359 1.2 itojun * Both address and port must be specified in argument sin6.
360 1.2 itojun * If don't have a local address for this socket yet,
361 1.2 itojun * then pick one.
362 1.2 itojun */
363 1.2 itojun int
364 1.2 itojun in6_pcbconnect(in6p, nam)
365 1.2 itojun struct in6pcb *in6p;
366 1.2 itojun struct mbuf *nam;
367 1.2 itojun {
368 1.2 itojun struct in6_addr *in6a = NULL;
369 1.2 itojun struct sockaddr_in6 *sin6 = mtod(nam, struct sockaddr_in6 *);
370 1.2 itojun struct in6_pktinfo *pi;
371 1.2 itojun struct ifnet *ifp = NULL; /* outgoing interface */
372 1.2 itojun int error = 0;
373 1.2 itojun struct in6_addr mapped;
374 1.2 itojun
375 1.2 itojun (void)&in6a; /* XXX fool gcc */
376 1.2 itojun
377 1.2 itojun if (nam->m_len != sizeof(*sin6))
378 1.2 itojun return(EINVAL);
379 1.2 itojun if (sin6->sin6_family != AF_INET6)
380 1.2 itojun return(EAFNOSUPPORT);
381 1.2 itojun if (sin6->sin6_port == 0)
382 1.2 itojun return(EADDRNOTAVAIL);
383 1.2 itojun
384 1.2 itojun /* sanity check for mapped address case */
385 1.2 itojun if (IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr)) {
386 1.2 itojun if (IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_laddr))
387 1.2 itojun in6p->in6p_laddr.s6_addr16[5] = htons(0xffff);
388 1.2 itojun if (!IN6_IS_ADDR_V4MAPPED(&in6p->in6p_laddr))
389 1.2 itojun return EINVAL;
390 1.2 itojun } else {
391 1.2 itojun if (IN6_IS_ADDR_V4MAPPED(&in6p->in6p_laddr))
392 1.2 itojun return EINVAL;
393 1.2 itojun }
394 1.2 itojun
395 1.2 itojun /*
396 1.2 itojun * If the scope of the destination is link-local, embed the interface
397 1.2 itojun * index in the address.
398 1.2 itojun */
399 1.2 itojun if (IN6_IS_SCOPE_LINKLOCAL(&sin6->sin6_addr)) {
400 1.2 itojun /* XXX boundary check is assumed to be already done. */
401 1.2 itojun /* XXX sin6_scope_id is weaker than advanced-api. */
402 1.2 itojun if (in6p->in6p_outputopts &&
403 1.2 itojun (pi = in6p->in6p_outputopts->ip6po_pktinfo) &&
404 1.2 itojun pi->ipi6_ifindex) {
405 1.2 itojun sin6->sin6_addr.s6_addr16[1] = htons(pi->ipi6_ifindex);
406 1.2 itojun ifp = ifindex2ifnet[pi->ipi6_ifindex];
407 1.2 itojun }
408 1.2 itojun else if (IN6_IS_ADDR_MULTICAST(&sin6->sin6_addr) &&
409 1.2 itojun in6p->in6p_moptions &&
410 1.2 itojun in6p->in6p_moptions->im6o_multicast_ifp) {
411 1.2 itojun sin6->sin6_addr.s6_addr16[1] =
412 1.2 itojun htons(in6p->in6p_moptions->im6o_multicast_ifp->if_index);
413 1.2 itojun ifp = ifindex2ifnet[in6p->in6p_moptions->im6o_multicast_ifp->if_index];
414 1.2 itojun } else if (sin6->sin6_scope_id) {
415 1.2 itojun /* boundary check */
416 1.2 itojun if (sin6->sin6_scope_id < 0
417 1.2 itojun || if_index < sin6->sin6_scope_id) {
418 1.2 itojun return ENXIO; /* XXX EINVAL? */
419 1.2 itojun }
420 1.2 itojun sin6->sin6_addr.s6_addr16[1]
421 1.2 itojun = htons(sin6->sin6_scope_id & 0xffff);/*XXX*/
422 1.2 itojun ifp = ifindex2ifnet[sin6->sin6_scope_id];
423 1.2 itojun }
424 1.2 itojun }
425 1.2 itojun
426 1.2 itojun /* Source address selection. */
427 1.2 itojun if (IN6_IS_ADDR_V4MAPPED(&in6p->in6p_laddr)
428 1.2 itojun && in6p->in6p_laddr.s6_addr32[3] == 0) {
429 1.2 itojun struct sockaddr_in sin, *sinp;
430 1.2 itojun
431 1.2 itojun bzero(&sin, sizeof(sin));
432 1.2 itojun sin.sin_len = sizeof(sin);
433 1.2 itojun sin.sin_family = AF_INET;
434 1.2 itojun bcopy(&sin6->sin6_addr.s6_addr32[3], &sin.sin_addr,
435 1.2 itojun sizeof(sin.sin_addr));
436 1.2 itojun sinp = in_selectsrc(&sin, (struct route *)&in6p->in6p_route,
437 1.2 itojun in6p->in6p_socket->so_options, NULL, &error);
438 1.2 itojun if (sinp == 0) {
439 1.2 itojun if (error == 0)
440 1.2 itojun error = EADDRNOTAVAIL;
441 1.2 itojun return(error);
442 1.2 itojun }
443 1.2 itojun bzero(&mapped, sizeof(mapped));
444 1.2 itojun mapped.s6_addr16[5] = htons(0xffff);
445 1.2 itojun bcopy(&sinp->sin_addr, &mapped.s6_addr32[3], sizeof(sinp->sin_addr));
446 1.2 itojun in6a = &mapped;
447 1.10 itojun } else {
448 1.10 itojun /*
449 1.10 itojun * XXX: in6_selectsrc might replace the bound local address
450 1.10 itojun * with the address specified by setsockopt(IPV6_PKTINFO).
451 1.10 itojun * Is it the intended behavior?
452 1.10 itojun */
453 1.2 itojun in6a = in6_selectsrc(sin6, in6p->in6p_outputopts,
454 1.10 itojun in6p->in6p_moptions,
455 1.10 itojun &in6p->in6p_route,
456 1.10 itojun &in6p->in6p_laddr, &error);
457 1.2 itojun if (in6a == 0) {
458 1.2 itojun if (error == 0)
459 1.2 itojun error = EADDRNOTAVAIL;
460 1.2 itojun return(error);
461 1.2 itojun }
462 1.2 itojun }
463 1.2 itojun if (in6p->in6p_route.ro_rt)
464 1.2 itojun ifp = in6p->in6p_route.ro_rt->rt_ifp;
465 1.2 itojun
466 1.10 itojun in6p->in6p_ip6.ip6_hlim = (u_int8_t)in6_selecthlim(in6p, ifp);
467 1.2 itojun
468 1.2 itojun if (in6_pcblookup(in6p->in6p_head,
469 1.2 itojun &sin6->sin6_addr,
470 1.2 itojun sin6->sin6_port,
471 1.10 itojun IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_laddr) ?
472 1.2 itojun in6a : &in6p->in6p_laddr,
473 1.2 itojun in6p->in6p_lport,
474 1.2 itojun 0))
475 1.2 itojun return(EADDRINUSE);
476 1.10 itojun if (IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_laddr)
477 1.2 itojun || (IN6_IS_ADDR_V4MAPPED(&in6p->in6p_laddr)
478 1.2 itojun && in6p->in6p_laddr.s6_addr32[3] == 0)) {
479 1.2 itojun if (in6p->in6p_lport == 0)
480 1.2 itojun (void)in6_pcbbind(in6p, (struct mbuf *)0);
481 1.2 itojun in6p->in6p_laddr = *in6a;
482 1.2 itojun }
483 1.2 itojun in6p->in6p_faddr = sin6->sin6_addr;
484 1.2 itojun in6p->in6p_fport = sin6->sin6_port;
485 1.2 itojun /*
486 1.2 itojun * xxx kazu flowlabel is necessary for connect?
487 1.2 itojun * but if this line is missing, the garbage value remains.
488 1.2 itojun */
489 1.2 itojun in6p->in6p_flowinfo = sin6->sin6_flowinfo;
490 1.2 itojun return(0);
491 1.2 itojun }
492 1.2 itojun
493 1.2 itojun /*
494 1.2 itojun * Return an IPv6 address, which is the most appropriate for given
495 1.2 itojun * destination and user specified options.
496 1.2 itojun * If necessary, this function lookups the routing table and return
497 1.2 itojun * an entry to the caller for later use.
498 1.2 itojun */
499 1.2 itojun struct in6_addr *
500 1.10 itojun in6_selectsrc(dstsock, opts, mopts, ro, laddr, errorp)
501 1.2 itojun struct sockaddr_in6 *dstsock;
502 1.2 itojun struct ip6_pktopts *opts;
503 1.2 itojun struct ip6_moptions *mopts;
504 1.2 itojun struct route_in6 *ro;
505 1.10 itojun struct in6_addr *laddr;
506 1.2 itojun int *errorp;
507 1.2 itojun {
508 1.2 itojun struct in6_addr *dst;
509 1.2 itojun struct in6_ifaddr *ia6 = 0;
510 1.10 itojun struct in6_pktinfo *pi = NULL;
511 1.2 itojun
512 1.2 itojun dst = &dstsock->sin6_addr;
513 1.2 itojun *errorp = 0;
514 1.2 itojun
515 1.2 itojun /*
516 1.2 itojun * If the source address is explicitly specified by the caller,
517 1.2 itojun * use it.
518 1.10 itojun */
519 1.10 itojun if (opts && (pi = opts->ip6po_pktinfo) &&
520 1.10 itojun !IN6_IS_ADDR_UNSPECIFIED(&pi->ipi6_addr))
521 1.10 itojun return(&pi->ipi6_addr);
522 1.10 itojun
523 1.10 itojun /*
524 1.10 itojun * If the source address is not specified but the socket(if any)
525 1.10 itojun * is already bound, use the bound address.
526 1.10 itojun */
527 1.10 itojun if (laddr && !IN6_IS_ADDR_UNSPECIFIED(laddr))
528 1.10 itojun return(laddr);
529 1.10 itojun
530 1.10 itojun /*
531 1.2 itojun * If the caller doesn't specify the source address but
532 1.2 itojun * the outgoing interface, use an address associated with
533 1.2 itojun * the interface.
534 1.2 itojun */
535 1.10 itojun if (pi && pi->ipi6_ifindex) {
536 1.10 itojun /* XXX boundary check is assumed to be already done. */
537 1.10 itojun ia6 = in6_ifawithscope(ifindex2ifnet[pi->ipi6_ifindex],
538 1.10 itojun dst);
539 1.10 itojun if (ia6 == 0) {
540 1.10 itojun *errorp = EADDRNOTAVAIL;
541 1.10 itojun return(0);
542 1.10 itojun }
543 1.10 itojun return(&satosin6(&ia6->ia_addr)->sin6_addr);
544 1.10 itojun }
545 1.10 itojun
546 1.10 itojun /*
547 1.10 itojun * If the destination address is a link-local unicast address or
548 1.10 itojun * a multicast address, and if the outgoing interface is specified
549 1.10 itojun * by the sin6_scope_id filed, use an address associated with the
550 1.10 itojun * interface.
551 1.10 itojun * XXX: We're now trying to define more specific semantics of
552 1.10 itojun * sin6_scope_id field, so this part will be rewritten in
553 1.10 itojun * the near future.
554 1.10 itojun */
555 1.10 itojun if ((IN6_IS_ADDR_LINKLOCAL(dst) || IN6_IS_ADDR_MULTICAST(dst)) &&
556 1.10 itojun dstsock->sin6_scope_id) {
557 1.10 itojun /*
558 1.10 itojun * I'm not sure if boundary check for scope_id is done
559 1.10 itojun * somewhere...
560 1.10 itojun */
561 1.10 itojun if (dstsock->sin6_scope_id < 0 ||
562 1.10 itojun if_index < dstsock->sin6_scope_id) {
563 1.10 itojun *errorp = ENXIO; /* XXX: better error? */
564 1.10 itojun return(0);
565 1.10 itojun }
566 1.10 itojun ia6 = in6_ifawithscope(ifindex2ifnet[dstsock->sin6_scope_id],
567 1.10 itojun dst);
568 1.10 itojun if (ia6 == 0) {
569 1.10 itojun *errorp = EADDRNOTAVAIL;
570 1.10 itojun return(0);
571 1.2 itojun }
572 1.10 itojun return(&satosin6(&ia6->ia_addr)->sin6_addr);
573 1.2 itojun }
574 1.2 itojun
575 1.2 itojun /*
576 1.2 itojun * If the destination address is a multicast address and
577 1.2 itojun * the outgoing interface for the address is specified
578 1.2 itojun * by the caller, use an address associated with the interface.
579 1.2 itojun * There is a sanity check here; if the destination has node-local
580 1.2 itojun * scope, the outgoing interfacde should be a loopback address.
581 1.2 itojun * Even if the outgoing interface is not specified, we also
582 1.2 itojun * choose a loopback interface as the outgoing interface.
583 1.2 itojun */
584 1.2 itojun if (IN6_IS_ADDR_MULTICAST(dst)) {
585 1.2 itojun struct ifnet *ifp = mopts ? mopts->im6o_multicast_ifp : NULL;
586 1.2 itojun
587 1.2 itojun if (ifp == NULL && IN6_IS_ADDR_MC_NODELOCAL(dst)) {
588 1.2 itojun ifp = &loif[0];
589 1.2 itojun }
590 1.2 itojun
591 1.2 itojun if (ifp) {
592 1.2 itojun ia6 = in6_ifawithscope(ifp, dst);
593 1.2 itojun if (ia6 == 0) {
594 1.2 itojun *errorp = EADDRNOTAVAIL;
595 1.2 itojun return(0);
596 1.2 itojun }
597 1.2 itojun return(&satosin6(&ia6->ia_addr)->sin6_addr);
598 1.2 itojun }
599 1.2 itojun }
600 1.2 itojun
601 1.2 itojun /*
602 1.2 itojun * If the next hop address for the packet is specified
603 1.2 itojun * by caller, use an address associated with the route
604 1.2 itojun * to the next hop.
605 1.2 itojun */
606 1.2 itojun {
607 1.2 itojun struct sockaddr_in6 *sin6_next;
608 1.2 itojun struct rtentry *rt;
609 1.2 itojun
610 1.2 itojun if (opts && opts->ip6po_nexthop) {
611 1.2 itojun sin6_next = satosin6(opts->ip6po_nexthop);
612 1.2 itojun rt = nd6_lookup(&sin6_next->sin6_addr, 1, NULL);
613 1.2 itojun if (rt) {
614 1.2 itojun ia6 = in6_ifawithscope(rt->rt_ifp, dst);
615 1.2 itojun if (ia6 == 0)
616 1.2 itojun ia6 = ifatoia6(rt->rt_ifa);
617 1.2 itojun }
618 1.2 itojun if (ia6 == 0) {
619 1.2 itojun *errorp = EADDRNOTAVAIL;
620 1.2 itojun return(0);
621 1.2 itojun }
622 1.2 itojun return(&satosin6(&ia6->ia_addr)->sin6_addr);
623 1.2 itojun }
624 1.2 itojun }
625 1.2 itojun
626 1.2 itojun /*
627 1.2 itojun * If route is known or can be allocated now,
628 1.2 itojun * our src addr is taken from the i/f, else punt.
629 1.2 itojun */
630 1.2 itojun if (ro) {
631 1.2 itojun if (ro->ro_rt &&
632 1.2 itojun !IN6_ARE_ADDR_EQUAL(&satosin6(&ro->ro_dst)->sin6_addr, dst)) {
633 1.2 itojun RTFREE(ro->ro_rt);
634 1.2 itojun ro->ro_rt = (struct rtentry *)0;
635 1.2 itojun }
636 1.2 itojun if (ro->ro_rt == (struct rtentry *)0 ||
637 1.2 itojun ro->ro_rt->rt_ifp == (struct ifnet *)0) {
638 1.2 itojun /* No route yet, so try to acquire one */
639 1.2 itojun bzero(&ro->ro_dst, sizeof(struct sockaddr_in6));
640 1.2 itojun ro->ro_dst.sin6_family = AF_INET6;
641 1.2 itojun ro->ro_dst.sin6_len = sizeof(struct sockaddr_in6);
642 1.2 itojun ro->ro_dst.sin6_addr = *dst;
643 1.2 itojun if (IN6_IS_ADDR_MULTICAST(dst)) {
644 1.2 itojun ro->ro_rt = rtalloc1(&((struct route *)ro)
645 1.2 itojun ->ro_dst, 0);
646 1.11 itojun } else {
647 1.2 itojun rtalloc((struct route *)ro);
648 1.11 itojun }
649 1.11 itojun
650 1.2 itojun }
651 1.2 itojun
652 1.2 itojun /*
653 1.2 itojun * in_pcbconnect() checks out IFF_LOOPBACK to skip using
654 1.2 itojun * the address. But we don't know why it does so.
655 1.2 itojun * It is necessary to ensure the scope even for lo0
656 1.2 itojun * so doesn't check out IFF_LOOPBACK.
657 1.2 itojun */
658 1.2 itojun
659 1.2 itojun if (ro->ro_rt) {
660 1.2 itojun ia6 = in6_ifawithscope(ro->ro_rt->rt_ifa->ifa_ifp, dst);
661 1.2 itojun if (ia6 == 0) /* xxx scope error ?*/
662 1.2 itojun ia6 = ifatoia6(ro->ro_rt->rt_ifa);
663 1.2 itojun }
664 1.2 itojun #if 0
665 1.2 itojun /*
666 1.2 itojun * xxx The followings are necessary? (kazu)
667 1.2 itojun * I don't think so.
668 1.2 itojun * It's for SO_DONTROUTE option in IPv4.(jinmei)
669 1.2 itojun */
670 1.2 itojun if (ia6 == 0) {
671 1.2 itojun struct sockaddr_in6 sin6 = {sizeof(sin6), AF_INET6, 0};
672 1.2 itojun
673 1.2 itojun sin6->sin6_addr = *dst;
674 1.2 itojun
675 1.2 itojun ia6 = ifatoia6(ifa_ifwithdstaddr(sin6tosa(&sin6)));
676 1.2 itojun if (ia6 == 0)
677 1.2 itojun ia6 = ifatoia6(ifa_ifwithnet(sin6tosa(&sin6)));
678 1.2 itojun if (ia6 == 0)
679 1.2 itojun return(0);
680 1.2 itojun return(&satosin6(&ia6->ia_addr)->sin6_addr);
681 1.2 itojun }
682 1.2 itojun #endif /* 0 */
683 1.2 itojun if (ia6 == 0) {
684 1.2 itojun *errorp = EHOSTUNREACH; /* no route */
685 1.2 itojun return(0);
686 1.2 itojun }
687 1.2 itojun return(&satosin6(&ia6->ia_addr)->sin6_addr);
688 1.2 itojun }
689 1.2 itojun
690 1.2 itojun *errorp = EADDRNOTAVAIL;
691 1.2 itojun return(0);
692 1.2 itojun }
693 1.2 itojun
694 1.10 itojun /*
695 1.10 itojun * Default hop limit selection. The precedence is as follows:
696 1.10 itojun * 1. Hoplimit valued specified via ioctl.
697 1.10 itojun * 2. (If the outgoing interface is detected) the current
698 1.10 itojun * hop limit of the interface specified by router advertisement.
699 1.10 itojun * 3. The system default hoplimit.
700 1.10 itojun */
701 1.10 itojun int
702 1.10 itojun in6_selecthlim(in6p, ifp)
703 1.10 itojun struct in6pcb *in6p;
704 1.10 itojun struct ifnet *ifp;
705 1.10 itojun {
706 1.10 itojun if (in6p && in6p->in6p_hops >= 0)
707 1.10 itojun return(in6p->in6p_hops);
708 1.10 itojun else if (ifp)
709 1.10 itojun return(nd_ifinfo[ifp->if_index].chlim);
710 1.10 itojun else
711 1.10 itojun return(ip6_defhlim);
712 1.10 itojun }
713 1.10 itojun
714 1.2 itojun void
715 1.2 itojun in6_pcbdisconnect(in6p)
716 1.2 itojun struct in6pcb *in6p;
717 1.2 itojun {
718 1.2 itojun bzero((caddr_t)&in6p->in6p_faddr, sizeof(in6p->in6p_faddr));
719 1.2 itojun in6p->in6p_fport = 0;
720 1.2 itojun if (in6p->in6p_socket->so_state & SS_NOFDREF)
721 1.2 itojun in6_pcbdetach(in6p);
722 1.2 itojun }
723 1.2 itojun
724 1.2 itojun void
725 1.2 itojun in6_pcbdetach(in6p)
726 1.2 itojun struct in6pcb *in6p;
727 1.2 itojun {
728 1.2 itojun struct socket *so = in6p->in6p_socket;
729 1.2 itojun
730 1.2 itojun #ifdef IPSEC
731 1.2 itojun ipsec6_delete_pcbpolicy(in6p);
732 1.2 itojun #endif /* IPSEC */
733 1.2 itojun sotoin6pcb(so) = 0;
734 1.2 itojun sofree(so);
735 1.2 itojun if (in6p->in6p_options)
736 1.2 itojun m_freem(in6p->in6p_options);
737 1.2 itojun if (in6p->in6p_outputopts) {
738 1.2 itojun if (in6p->in6p_outputopts->ip6po_rthdr &&
739 1.2 itojun in6p->in6p_outputopts->ip6po_route.ro_rt)
740 1.2 itojun RTFREE(in6p->in6p_outputopts->ip6po_route.ro_rt);
741 1.2 itojun if (in6p->in6p_outputopts->ip6po_m)
742 1.2 itojun (void)m_free(in6p->in6p_outputopts->ip6po_m);
743 1.2 itojun free(in6p->in6p_outputopts, M_IP6OPT);
744 1.2 itojun }
745 1.2 itojun if (in6p->in6p_route.ro_rt)
746 1.2 itojun rtfree(in6p->in6p_route.ro_rt);
747 1.2 itojun ip6_freemoptions(in6p->in6p_moptions);
748 1.3 itojun in6p->in6p_next->in6p_prev = in6p->in6p_prev;
749 1.3 itojun in6p->in6p_prev->in6p_next = in6p->in6p_next;
750 1.3 itojun in6p->in6p_prev = NULL;
751 1.2 itojun FREE(in6p, M_PCB);
752 1.2 itojun }
753 1.2 itojun
754 1.2 itojun void
755 1.2 itojun in6_setsockaddr(in6p, nam)
756 1.2 itojun struct in6pcb *in6p;
757 1.2 itojun struct mbuf *nam;
758 1.2 itojun {
759 1.2 itojun struct sockaddr_in6 *sin6;
760 1.2 itojun
761 1.2 itojun nam->m_len = sizeof(*sin6);
762 1.2 itojun sin6 = mtod(nam, struct sockaddr_in6 *);
763 1.2 itojun bzero((caddr_t)sin6, sizeof(*sin6));
764 1.2 itojun sin6->sin6_family = AF_INET6;
765 1.2 itojun sin6->sin6_len = sizeof(struct sockaddr_in6);
766 1.2 itojun sin6->sin6_port = in6p->in6p_lport;
767 1.2 itojun sin6->sin6_addr = in6p->in6p_laddr;
768 1.2 itojun if (IN6_IS_SCOPE_LINKLOCAL(&sin6->sin6_addr))
769 1.2 itojun sin6->sin6_scope_id = ntohs(sin6->sin6_addr.s6_addr16[1]);
770 1.2 itojun else
771 1.2 itojun sin6->sin6_scope_id = 0; /*XXX*/
772 1.2 itojun if (IN6_IS_SCOPE_LINKLOCAL(&sin6->sin6_addr))
773 1.2 itojun sin6->sin6_addr.s6_addr16[1] = 0;
774 1.2 itojun }
775 1.2 itojun
776 1.2 itojun void
777 1.2 itojun in6_setpeeraddr(in6p, nam)
778 1.2 itojun struct in6pcb *in6p;
779 1.2 itojun struct mbuf *nam;
780 1.2 itojun {
781 1.2 itojun struct sockaddr_in6 *sin6;
782 1.2 itojun
783 1.2 itojun nam->m_len = sizeof(*sin6);
784 1.2 itojun sin6 = mtod(nam, struct sockaddr_in6 *);
785 1.2 itojun bzero((caddr_t)sin6, sizeof(*sin6));
786 1.2 itojun sin6->sin6_family = AF_INET6;
787 1.2 itojun sin6->sin6_len = sizeof(struct sockaddr_in6);
788 1.2 itojun sin6->sin6_port = in6p->in6p_fport;
789 1.2 itojun sin6->sin6_addr = in6p->in6p_faddr;
790 1.2 itojun if (IN6_IS_SCOPE_LINKLOCAL(&sin6->sin6_addr))
791 1.2 itojun sin6->sin6_scope_id = ntohs(sin6->sin6_addr.s6_addr16[1]);
792 1.2 itojun else
793 1.2 itojun sin6->sin6_scope_id = 0; /*XXX*/
794 1.2 itojun if (IN6_IS_SCOPE_LINKLOCAL(&sin6->sin6_addr))
795 1.2 itojun sin6->sin6_addr.s6_addr16[1] = 0;
796 1.2 itojun }
797 1.2 itojun
798 1.2 itojun /*
799 1.2 itojun * Pass some notification to all connections of a protocol
800 1.2 itojun * associated with address dst. The local address and/or port numbers
801 1.2 itojun * may be specified to limit the search. The "usual action" will be
802 1.2 itojun * taken, depending on the ctlinput cmd. The caller must filter any
803 1.2 itojun * cmds that are uninteresting (e.g., no error in the map).
804 1.2 itojun * Call the protocol specific routine (if any) to report
805 1.2 itojun * any errors for each matching socket.
806 1.2 itojun *
807 1.6 itojun * Must be called at splsoftnet.
808 1.2 itojun */
809 1.2 itojun int
810 1.2 itojun in6_pcbnotify(head, dst, fport_arg, laddr6, lport_arg, cmd, notify)
811 1.2 itojun struct in6pcb *head;
812 1.2 itojun struct sockaddr *dst;
813 1.2 itojun u_int fport_arg, lport_arg;
814 1.2 itojun struct in6_addr *laddr6;
815 1.2 itojun int cmd;
816 1.2 itojun void (*notify) __P((struct in6pcb *, int));
817 1.2 itojun {
818 1.20 itojun struct in6pcb *in6p, *nin6p;
819 1.2 itojun struct in6_addr faddr6;
820 1.18 itojun u_int16_t fport = fport_arg, lport = lport_arg;
821 1.2 itojun int errno;
822 1.2 itojun int nmatch = 0;
823 1.20 itojun void (*notify2) __P((struct in6pcb *, int));
824 1.20 itojun
825 1.20 itojun notify2 = NULL;
826 1.2 itojun
827 1.2 itojun if ((unsigned)cmd > PRC_NCMDS || dst->sa_family != AF_INET6)
828 1.2 itojun return 0;
829 1.2 itojun faddr6 = ((struct sockaddr_in6 *)dst)->sin6_addr;
830 1.10 itojun if (IN6_IS_ADDR_UNSPECIFIED(&faddr6))
831 1.2 itojun return 0;
832 1.2 itojun
833 1.2 itojun /*
834 1.2 itojun * Redirects go to all references to the destination,
835 1.20 itojun * and use in6_rtchange to invalidate the route cache.
836 1.20 itojun * Dead host indications: also use in6_rtchange to invalidate
837 1.20 itojun * the cache, and deliver the error to all the sockets.
838 1.2 itojun * Otherwise, if we have knowledge of the local port and address,
839 1.2 itojun * deliver only to that socket.
840 1.2 itojun */
841 1.2 itojun if (PRC_IS_REDIRECT(cmd) || cmd == PRC_HOSTDEAD) {
842 1.2 itojun fport = 0;
843 1.2 itojun lport = 0;
844 1.2 itojun bzero((caddr_t)laddr6, sizeof(*laddr6));
845 1.20 itojun
846 1.20 itojun /*
847 1.20 itojun * Keep the old notify function to store a soft error
848 1.20 itojun * in each PCB.
849 1.20 itojun */
850 1.20 itojun if (cmd == PRC_HOSTDEAD && notify != in6_rtchange)
851 1.20 itojun notify2 = notify;
852 1.20 itojun
853 1.20 itojun notify = in6_rtchange;
854 1.2 itojun }
855 1.20 itojun
856 1.2 itojun if (notify == NULL)
857 1.2 itojun return 0;
858 1.20 itojun
859 1.2 itojun errno = inet6ctlerrmap[cmd];
860 1.20 itojun for (in6p = head->in6p_next; in6p != head; in6p = nin6p) {
861 1.20 itojun nin6p = in6p->in6p_next;
862 1.20 itojun
863 1.20 itojun if (notify == in6_rtchange) {
864 1.20 itojun /*
865 1.20 itojun * Since a non-connected PCB might have a cached route,
866 1.20 itojun * we always call in6_rtchange without matching
867 1.20 itojun * the PCB to the src/dst pair.
868 1.20 itojun *
869 1.20 itojun * XXX: we assume in6_rtchange does not free the PCB.
870 1.20 itojun */
871 1.20 itojun if (IN6_ARE_ADDR_EQUAL(&in6p->in6p_route.ro_dst.sin6_addr,
872 1.20 itojun &faddr6))
873 1.20 itojun in6_rtchange(in6p, errno);
874 1.20 itojun
875 1.20 itojun if (notify2 == NULL)
876 1.20 itojun continue;
877 1.20 itojun
878 1.20 itojun notify = notify2;
879 1.20 itojun }
880 1.20 itojun
881 1.20 itojun /* at this point, we can assume that NOTIFY is not NULL. */
882 1.20 itojun
883 1.20 itojun if (!IN6_ARE_ADDR_EQUAL(&in6p->in6p_faddr, &faddr6) ||
884 1.20 itojun in6p->in6p_socket == 0 ||
885 1.20 itojun (lport && in6p->in6p_lport != lport) ||
886 1.20 itojun (!IN6_IS_ADDR_UNSPECIFIED(laddr6) &&
887 1.20 itojun !IN6_ARE_ADDR_EQUAL(&in6p->in6p_laddr, laddr6)) ||
888 1.20 itojun (fport && in6p->in6p_fport != fport))
889 1.2 itojun continue;
890 1.20 itojun
891 1.20 itojun (*notify)(in6p, errno);
892 1.2 itojun nmatch++;
893 1.2 itojun }
894 1.2 itojun return nmatch;
895 1.16 thorpej }
896 1.16 thorpej
897 1.16 thorpej void
898 1.16 thorpej in6_pcbpurgeif(head, ifp)
899 1.16 thorpej struct in6pcb *head;
900 1.16 thorpej struct ifnet *ifp;
901 1.16 thorpej {
902 1.16 thorpej struct in6pcb *in6p, *nin6p;
903 1.16 thorpej
904 1.16 thorpej for (in6p = head->in6p_next; in6p != head; in6p = nin6p) {
905 1.16 thorpej nin6p = in6p->in6p_next;
906 1.16 thorpej if (in6p->in6p_route.ro_rt != NULL &&
907 1.16 thorpej in6p->in6p_route.ro_rt->rt_ifp == ifp)
908 1.16 thorpej in6_rtchange(in6p, 0);
909 1.16 thorpej }
910 1.2 itojun }
911 1.2 itojun
912 1.2 itojun /*
913 1.2 itojun * Check for alternatives when higher level complains
914 1.2 itojun * about service problems. For now, invalidate cached
915 1.2 itojun * routing information. If the route was created dynamically
916 1.2 itojun * (by a redirect), time to try a default gateway again.
917 1.2 itojun */
918 1.2 itojun void
919 1.2 itojun in6_losing(in6p)
920 1.2 itojun struct in6pcb *in6p;
921 1.2 itojun {
922 1.2 itojun struct rtentry *rt;
923 1.2 itojun struct rt_addrinfo info;
924 1.2 itojun
925 1.2 itojun if ((rt = in6p->in6p_route.ro_rt) != NULL) {
926 1.2 itojun in6p->in6p_route.ro_rt = 0;
927 1.2 itojun bzero((caddr_t)&info, sizeof(info));
928 1.2 itojun info.rti_info[RTAX_DST] =
929 1.2 itojun (struct sockaddr *)&in6p->in6p_route.ro_dst;
930 1.2 itojun info.rti_info[RTAX_GATEWAY] = rt->rt_gateway;
931 1.2 itojun info.rti_info[RTAX_NETMASK] = rt_mask(rt);
932 1.2 itojun rt_missmsg(RTM_LOSING, &info, rt->rt_flags, 0);
933 1.2 itojun if (rt->rt_flags & RTF_DYNAMIC)
934 1.2 itojun (void)rtrequest(RTM_DELETE, rt_key(rt),
935 1.2 itojun rt->rt_gateway, rt_mask(rt), rt->rt_flags,
936 1.2 itojun (struct rtentry **)0);
937 1.2 itojun else
938 1.2 itojun /*
939 1.2 itojun * A new route can be allocated
940 1.2 itojun * the next time output is attempted.
941 1.2 itojun */
942 1.2 itojun rtfree(rt);
943 1.2 itojun }
944 1.2 itojun }
945 1.2 itojun
946 1.2 itojun /*
947 1.2 itojun * After a routing change, flush old routing
948 1.2 itojun * and allocate a (hopefully) better one.
949 1.2 itojun */
950 1.2 itojun void
951 1.2 itojun in6_rtchange(in6p, errno)
952 1.2 itojun struct in6pcb *in6p;
953 1.2 itojun int errno;
954 1.2 itojun {
955 1.2 itojun if (in6p->in6p_route.ro_rt) {
956 1.2 itojun rtfree(in6p->in6p_route.ro_rt);
957 1.2 itojun in6p->in6p_route.ro_rt = 0;
958 1.2 itojun /*
959 1.2 itojun * A new route can be allocated the next time
960 1.2 itojun * output is attempted.
961 1.2 itojun */
962 1.2 itojun }
963 1.2 itojun }
964 1.2 itojun
965 1.2 itojun struct in6pcb *
966 1.2 itojun in6_pcblookup(head, faddr6, fport_arg, laddr6, lport_arg, flags)
967 1.2 itojun struct in6pcb *head;
968 1.2 itojun struct in6_addr *faddr6, *laddr6;
969 1.2 itojun u_int fport_arg, lport_arg;
970 1.2 itojun int flags;
971 1.2 itojun {
972 1.2 itojun struct in6pcb *in6p, *match = 0;
973 1.2 itojun int matchwild = 3, wildcard;
974 1.18 itojun u_int16_t fport = fport_arg, lport = lport_arg;
975 1.2 itojun
976 1.2 itojun for (in6p = head->in6p_next; in6p != head; in6p = in6p->in6p_next) {
977 1.2 itojun if (in6p->in6p_lport != lport)
978 1.2 itojun continue;
979 1.2 itojun wildcard = 0;
980 1.10 itojun if (!IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_laddr)) {
981 1.10 itojun if (IN6_IS_ADDR_UNSPECIFIED(laddr6))
982 1.2 itojun wildcard++;
983 1.2 itojun else if (!IN6_ARE_ADDR_EQUAL(&in6p->in6p_laddr, laddr6))
984 1.2 itojun continue;
985 1.11 itojun }
986 1.11 itojun #ifndef TCP6
987 1.11 itojun else if (IN6_IS_ADDR_V4MAPPED(&in6p->in6p_laddr)
988 1.11 itojun && in6p->in6p_laddr.s6_addr32[3] == 0) {
989 1.11 itojun if (!IN6_IS_ADDR_V4MAPPED(laddr6))
990 1.11 itojun continue;
991 1.11 itojun if (laddr6->s6_addr32[3] == 0)
992 1.11 itojun ;
993 1.11 itojun else
994 1.11 itojun wildcard++;
995 1.11 itojun }
996 1.11 itojun #endif
997 1.11 itojun else {
998 1.11 itojun if (IN6_IS_ADDR_V4MAPPED(laddr6)) {
999 1.11 itojun #if !defined(TCP6) && !defined(INET6_BINDV6ONLY)
1000 1.11 itojun if (in6p->in6p_flags & IN6P_BINDV6ONLY)
1001 1.11 itojun continue;
1002 1.11 itojun else
1003 1.11 itojun wildcard++;
1004 1.11 itojun #else
1005 1.11 itojun continue;
1006 1.11 itojun #endif
1007 1.11 itojun } else if (!IN6_IS_ADDR_UNSPECIFIED(laddr6))
1008 1.2 itojun wildcard++;
1009 1.2 itojun }
1010 1.10 itojun if (!IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
1011 1.10 itojun if (IN6_IS_ADDR_UNSPECIFIED(faddr6))
1012 1.2 itojun wildcard++;
1013 1.2 itojun else if (!IN6_ARE_ADDR_EQUAL(&in6p->in6p_faddr, faddr6)
1014 1.2 itojun || in6p->in6p_fport != fport)
1015 1.2 itojun continue;
1016 1.11 itojun }
1017 1.11 itojun #ifndef TCP6
1018 1.11 itojun else if (IN6_IS_ADDR_V4MAPPED(&in6p->in6p_faddr)
1019 1.11 itojun && in6p->in6p_faddr.s6_addr32[3] == 0) {
1020 1.11 itojun if (!IN6_IS_ADDR_V4MAPPED(faddr6))
1021 1.11 itojun continue;
1022 1.11 itojun if (faddr6->s6_addr32[3] == 0)
1023 1.11 itojun ;
1024 1.11 itojun else
1025 1.11 itojun wildcard++;
1026 1.11 itojun }
1027 1.11 itojun #endif
1028 1.11 itojun else {
1029 1.11 itojun if (IN6_IS_ADDR_V4MAPPED(faddr6)) {
1030 1.11 itojun #if !defined(TCP6) && !defined(INET6_BINDV6ONLY)
1031 1.11 itojun if (in6p->in6p_flags & IN6P_BINDV6ONLY)
1032 1.11 itojun continue;
1033 1.11 itojun else
1034 1.11 itojun wildcard++;
1035 1.11 itojun #else
1036 1.11 itojun continue;
1037 1.11 itojun #endif
1038 1.11 itojun } else if (!IN6_IS_ADDR_UNSPECIFIED(faddr6))
1039 1.2 itojun wildcard++;
1040 1.2 itojun }
1041 1.11 itojun
1042 1.2 itojun if (wildcard && (flags & IN6PLOOKUP_WILDCARD) == 0)
1043 1.2 itojun continue;
1044 1.2 itojun if (wildcard < matchwild) {
1045 1.2 itojun match = in6p;
1046 1.2 itojun matchwild = wildcard;
1047 1.2 itojun if (matchwild == 0)
1048 1.2 itojun break;
1049 1.2 itojun }
1050 1.2 itojun }
1051 1.2 itojun return(match);
1052 1.2 itojun }
1053 1.2 itojun
1054 1.2 itojun #ifndef TCP6
1055 1.2 itojun struct rtentry *
1056 1.2 itojun in6_pcbrtentry(in6p)
1057 1.2 itojun struct in6pcb *in6p;
1058 1.2 itojun {
1059 1.2 itojun struct route_in6 *ro;
1060 1.2 itojun
1061 1.2 itojun ro = &in6p->in6p_route;
1062 1.2 itojun
1063 1.2 itojun if (ro->ro_rt == NULL) {
1064 1.2 itojun /*
1065 1.2 itojun * No route yet, so try to acquire one.
1066 1.2 itojun */
1067 1.2 itojun if (!IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
1068 1.2 itojun bzero(&ro->ro_dst, sizeof(ro->ro_dst));
1069 1.2 itojun ro->ro_dst.sin6_family = AF_INET6;
1070 1.2 itojun ro->ro_dst.sin6_len = sizeof(struct sockaddr_in6);
1071 1.2 itojun satosin6(&ro->ro_dst)->sin6_addr = in6p->in6p_faddr;
1072 1.2 itojun rtalloc((struct route *)ro);
1073 1.2 itojun }
1074 1.2 itojun }
1075 1.2 itojun return (ro->ro_rt);
1076 1.2 itojun }
1077 1.2 itojun
1078 1.2 itojun struct in6pcb *
1079 1.8 itojun in6_pcblookup_connect(head, faddr6, fport_arg, laddr6, lport_arg, faith)
1080 1.2 itojun struct in6pcb *head;
1081 1.2 itojun struct in6_addr *faddr6, *laddr6;
1082 1.2 itojun u_int fport_arg, lport_arg;
1083 1.8 itojun int faith;
1084 1.2 itojun {
1085 1.2 itojun struct in6pcb *in6p;
1086 1.18 itojun u_int16_t fport = fport_arg, lport = lport_arg;
1087 1.2 itojun
1088 1.2 itojun for (in6p = head->in6p_next; in6p != head; in6p = in6p->in6p_next) {
1089 1.8 itojun #if defined(NFAITH) && NFAITH > 0
1090 1.8 itojun if (faith && (in6p->in6p_flags & IN6P_FAITH) == 0)
1091 1.8 itojun continue;
1092 1.8 itojun #endif
1093 1.2 itojun /* find exact match on both source and dest */
1094 1.2 itojun if (in6p->in6p_fport != fport)
1095 1.2 itojun continue;
1096 1.2 itojun if (in6p->in6p_lport != lport)
1097 1.2 itojun continue;
1098 1.2 itojun if (IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr))
1099 1.2 itojun continue;
1100 1.2 itojun if (!IN6_ARE_ADDR_EQUAL(&in6p->in6p_faddr, faddr6))
1101 1.2 itojun continue;
1102 1.2 itojun if (IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_laddr))
1103 1.2 itojun continue;
1104 1.2 itojun if (!IN6_ARE_ADDR_EQUAL(&in6p->in6p_laddr, laddr6))
1105 1.2 itojun continue;
1106 1.2 itojun return in6p;
1107 1.2 itojun }
1108 1.2 itojun return NULL;
1109 1.2 itojun }
1110 1.2 itojun
1111 1.2 itojun struct in6pcb *
1112 1.8 itojun in6_pcblookup_bind(head, laddr6, lport_arg, faith)
1113 1.2 itojun struct in6pcb *head;
1114 1.2 itojun struct in6_addr *laddr6;
1115 1.2 itojun u_int lport_arg;
1116 1.8 itojun int faith;
1117 1.2 itojun {
1118 1.2 itojun struct in6pcb *in6p, *match;
1119 1.18 itojun u_int16_t lport = lport_arg;
1120 1.2 itojun
1121 1.2 itojun match = NULL;
1122 1.2 itojun for (in6p = head->in6p_next; in6p != head; in6p = in6p->in6p_next) {
1123 1.2 itojun /*
1124 1.2 itojun * find destination match. exact match is preferred
1125 1.2 itojun * against wildcard match.
1126 1.2 itojun */
1127 1.8 itojun #if defined(NFAITH) && NFAITH > 0
1128 1.8 itojun if (faith && (in6p->in6p_flags & IN6P_FAITH) == 0)
1129 1.8 itojun continue;
1130 1.8 itojun #endif
1131 1.2 itojun if (in6p->in6p_fport != 0)
1132 1.2 itojun continue;
1133 1.2 itojun if (in6p->in6p_lport != lport)
1134 1.2 itojun continue;
1135 1.11 itojun if (IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_laddr)) {
1136 1.11 itojun if (IN6_IS_ADDR_V4MAPPED(laddr6)) {
1137 1.11 itojun #ifndef INET6_BINDV6ONLY
1138 1.11 itojun if (in6p->in6p_flags & IN6P_BINDV6ONLY)
1139 1.11 itojun continue;
1140 1.11 itojun else
1141 1.11 itojun match = in6p;
1142 1.11 itojun #else
1143 1.11 itojun continue;
1144 1.11 itojun #endif
1145 1.11 itojun } else
1146 1.11 itojun match = in6p;
1147 1.11 itojun }
1148 1.20 itojun else if (IN6_IS_ADDR_V4MAPPED(&in6p->in6p_laddr) &&
1149 1.11 itojun in6p->in6p_laddr.s6_addr32[3] == 0) {
1150 1.20 itojun if (IN6_IS_ADDR_V4MAPPED(laddr6) &&
1151 1.20 itojun laddr6->s6_addr32[3] != 0)
1152 1.11 itojun match = in6p;
1153 1.11 itojun }
1154 1.2 itojun else if (IN6_ARE_ADDR_EQUAL(&in6p->in6p_laddr, laddr6))
1155 1.2 itojun return in6p;
1156 1.2 itojun }
1157 1.2 itojun return match;
1158 1.2 itojun }
1159 1.2 itojun #endif
1160