in6_pcb.h revision 1.15 1 /* $NetBSD: in6_pcb.h,v 1.15 2001/02/11 06:49:52 itojun Exp $ */
2 /* $KAME: in6_pcb.h,v 1.45 2001/02/09 05:59:46 itojun Exp $ */
3
4 /*
5 * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
6 * All rights reserved.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
10 * are met:
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. Neither the name of the project nor the names of its contributors
17 * may be used to endorse or promote products derived from this software
18 * without specific prior written permission.
19 *
20 * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
24 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
25 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
26 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
27 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
28 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
29 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30 * SUCH DAMAGE.
31 */
32
33 /*
34 * Copyright (c) 1982, 1986, 1990, 1993
35 * The Regents of the University of California. All rights reserved.
36 *
37 * Redistribution and use in source and binary forms, with or without
38 * modification, are permitted provided that the following conditions
39 * are met:
40 * 1. Redistributions of source code must retain the above copyright
41 * notice, this list of conditions and the following disclaimer.
42 * 2. Redistributions in binary form must reproduce the above copyright
43 * notice, this list of conditions and the following disclaimer in the
44 * documentation and/or other materials provided with the distribution.
45 * 3. All advertising materials mentioning features or use of this software
46 * must display the following acknowledgement:
47 * This product includes software developed by the University of
48 * California, Berkeley and its contributors.
49 * 4. Neither the name of the University nor the names of its contributors
50 * may be used to endorse or promote products derived from this software
51 * without specific prior written permission.
52 *
53 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
54 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
55 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
56 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
57 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
58 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
59 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
60 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
61 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
62 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
63 * SUCH DAMAGE.
64 *
65 * @(#)in_pcb.h 8.1 (Berkeley) 6/10/93
66 */
67
68 #ifndef _NETINET6_IN6_PCB_H_
69 #define _NETINET6_IN6_PCB_H_
70
71 #include <sys/queue.h>
72
73 /*
74 * Common structure pcb for internet protocol implementation.
75 * Here are stored pointers to local and foreign host table
76 * entries, local and foreign socket numbers, and pointers
77 * up (to a socket structure) and down (to a protocol-specific)
78 * control block.
79 */
80 struct icmp6_filter;
81 struct inpcbpolicy;
82
83 struct in6pcb {
84 struct in6pcb *in6p_next, *in6p_prev;
85 /* pointers to other pcb's */
86 struct in6pcb *in6p_head; /* pointer back to chain of
87 in6pcb's for this protocol */
88 struct in6_addr in6p_faddr; /* foreign host table entry */
89 u_int16_t in6p_fport; /* foreign port */
90 struct in6_addr in6p_laddr; /* local host table entry */
91 u_int16_t in6p_lport; /* local port */
92 u_int32_t in6p_flowinfo; /* priority and flowlabel */
93 struct socket *in6p_socket; /* back pointer to socket */
94 caddr_t in6p_ppcb; /* pointer to per-protocol pcb */
95 struct route_in6 in6p_route; /* placeholder for routing entry */
96 int in6p_flags; /* generic IP6/datagram flags */
97 int in6p_hops; /* default hop limit */
98 struct ip6_hdr in6p_ip6; /* header prototype */
99 struct mbuf *in6p_options; /* IP6 options */
100 struct ip6_pktopts *in6p_outputopts; /* IP6 options for outgoing packets */
101 struct ip6_moptions *in6p_moptions; /* IP6 multicast options */
102 u_short in6p_ifindex;
103 /* should move the following just after next/prev */
104 LIST_ENTRY(in6pcb) in6p_hlist; /* hash chain */
105 u_long in6p_hash; /* hash value */
106 #if 1 /*IPSEC*/
107 struct inpcbpolicy *in6p_sp; /* security policy. */
108 #endif
109 struct icmp6_filter *in6p_icmp6filt;
110 int in6p_cksum; /* IPV6_CHECKSUM setsockopt */
111 };
112
113 #define in6p_ip6_nxt in6p_ip6.ip6_nxt /* for KAME src sync over BSD*'s */
114
115 /*
116 * Flags in in6p_flags
117 * We define KAME's original flags in higher 16 bits as much as possible
118 * for compatibility with *bsd*s.
119 */
120 #define IN6P_RECVOPTS 0x001000 /* receive incoming IP6 options */
121 #define IN6P_RECVRETOPTS 0x002000 /* receive IP6 options for reply */
122 #define IN6P_RECVDSTADDR 0x004000 /* receive IP6 dst address */
123 #define IN6P_PKTINFO 0x010000 /* receive IP6 dst and I/F */
124 #define IN6P_HOPLIMIT 0x020000 /* receive hoplimit */
125 #define IN6P_HOPOPTS 0x040000 /* receive hop-by-hop options */
126 #define IN6P_DSTOPTS 0x080000 /* receive dst options after rthdr */
127 #define IN6P_RTHDR 0x100000 /* receive routing header */
128 #define IN6P_RTHDRDSTOPTS 0x200000 /* receive dstoptions before rthdr */
129
130 #define IN6P_HIGHPORT 0x1000000 /* user wants "high" port binding */
131 #define IN6P_LOWPORT 0x2000000 /* user wants "low" port binding */
132 #define IN6P_ANONPORT 0x4000000 /* port chosen for user */
133 #define IN6P_FAITH 0x8000000 /* accept FAITH'ed connections */
134 #define IN6P_BINDV6ONLY 0x10000000 /* do not grab IPv4 traffic */
135
136 #define IN6P_CONTROLOPTS (IN6P_PKTINFO|IN6P_HOPLIMIT|IN6P_HOPOPTS|\
137 IN6P_DSTOPTS|IN6P_RTHDR|IN6P_RTHDRDSTOPTS)
138
139
140 #define IN6PLOOKUP_WILDCARD 1
141 #define IN6PLOOKUP_SETLOCAL 2
142
143 /* compute hash value for foreign and local in6_addr and port */
144 #define IN6_HASH(faddr, fport, laddr, lport) \
145 (((faddr)->s6_addr32[0] ^ (faddr)->s6_addr32[1] ^ \
146 (faddr)->s6_addr32[2] ^ (faddr)->s6_addr32[3] ^ \
147 (laddr)->s6_addr32[0] ^ (laddr)->s6_addr32[1] ^ \
148 (laddr)->s6_addr32[2] ^ (laddr)->s6_addr32[3]) \
149 + (fport) + (lport))
150
151 #define sotoin6pcb(so) ((struct in6pcb *)(so)->so_pcb)
152
153 #ifdef _KERNEL
154 void in6_losing __P((struct in6pcb *));
155 int in6_pcballoc __P((struct socket *, struct in6pcb *));
156 int in6_pcbbind __P((struct in6pcb *, struct mbuf *, struct proc *));
157 int in6_pcbconnect __P((struct in6pcb *, struct mbuf *));
158 void in6_pcbdetach __P((struct in6pcb *));
159 void in6_pcbdisconnect __P((struct in6pcb *));
160 struct in6pcb *
161 in6_pcblookup __P((struct in6pcb *,
162 struct in6_addr *, u_int, struct in6_addr *,
163 u_int, int));
164 int in6_pcbnotify __P((struct in6pcb *, struct sockaddr *,
165 u_int, struct sockaddr *, u_int, int, void *,
166 void (*)(struct in6pcb *, int)));
167 void in6_pcbpurgeif __P((struct in6pcb *, struct ifnet *));
168 void in6_rtchange __P((struct in6pcb *, int));
169 void in6_setpeeraddr __P((struct in6pcb *, struct mbuf *));
170 void in6_setsockaddr __P((struct in6pcb *, struct mbuf *));
171
172 /* in in6_src.c */
173 struct in6_addr *in6_selectsrc __P((struct sockaddr_in6 *,
174 struct ip6_pktopts *,
175 struct ip6_moptions *,
176 struct route_in6 *,
177 struct in6_addr *, int *));
178 int in6_selecthlim __P((struct in6pcb *, struct ifnet *));
179 int in6_pcbsetport __P((struct in6_addr *, struct in6pcb *));
180
181 extern struct rtentry *
182 in6_pcbrtentry __P((struct in6pcb *));
183 extern struct in6pcb *in6_pcblookup_connect __P((struct in6pcb *,
184 struct in6_addr *, u_int, struct in6_addr *, u_int, int));
185 extern struct in6pcb *in6_pcblookup_bind __P((struct in6pcb *,
186 struct in6_addr *, u_int, int));
187 #endif /* _KERNEL */
188
189 #endif /* !_NETINET6_IN6_PCB_H_ */
190