sys/netinet6/in6_src.c

/*	$NetBSD: in6_src.c,v 1.14 2002/08/26 14:25:01 itojun Exp $	*/
/*	$KAME: in6_src.c,v 1.36 2001/02/06 04:08:17 itojun Exp $	*/

/*
 * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the project nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

/*
 * Copyright (c) 1982, 1986, 1991, 1993
 *	The Regents of the University of California.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *	This product includes software developed by the University of
 *	California, Berkeley and its contributors.
 * 4. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *	@(#)in_pcb.c	8.2 (Berkeley) 1/4/94
 */

#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: in6_src.c,v 1.14 2002/08/26 14:25:01 itojun Exp $");

#include "opt_inet.h"

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/mbuf.h>
#include <sys/protosw.h>
#include <sys/socket.h>
#include <sys/socketvar.h>
#include <sys/ioctl.h>
#include <sys/errno.h>
#include <sys/time.h>
#include <sys/proc.h>

#include <net/if.h>
#include <net/route.h>

#include <netinet/in.h>
#include <netinet/in_var.h>
#include <netinet/in_systm.h>
#include <netinet/ip.h>
#include <netinet/in_pcb.h>
#include <netinet6/in6_var.h>
#include <netinet/ip6.h>
#include <netinet6/in6_pcb.h>
#include <netinet6/ip6_var.h>
#include <netinet6/nd6.h>
#ifdef ENABLE_DEFAULT_SCOPE
#include <netinet6/scope6_var.h>
#endif

#include <net/net_osdep.h>

#include "loop.h"
extern struct ifnet loif[NLOOP];

/*
 * Return an IPv6 address, which is the most appropriate for a given
 * destination and user specified options.
 * If necessary, this function lookups the routing table and returns
 * an entry to the caller for later use.
 */
struct in6_addr *
in6_selectsrc(dstsock, opts, mopts, ro, laddr, errorp)
	struct sockaddr_in6 *dstsock;
	struct ip6_pktopts *opts;
	struct ip6_moptions *mopts;
	struct route_in6 *ro;
	struct in6_addr *laddr;
	int *errorp;
{
	struct in6_addr *dst;
	struct in6_ifaddr *ia6 = 0;
	struct in6_pktinfo *pi = NULL;

	dst = &dstsock->sin6_addr;
	*errorp = 0;

	/*
	 * If the source address is explicitly specified by the caller,
	 * use it.
	 */
	if (opts && (pi = opts->ip6po_pktinfo) &&
	    !IN6_IS_ADDR_UNSPECIFIED(&pi->ipi6_addr))
		return(&pi->ipi6_addr);

	/*
	 * If the source address is not specified but the socket(if any)
	 * is already bound, use the bound address.
	 */
	if (laddr && !IN6_IS_ADDR_UNSPECIFIED(laddr))
		return(laddr);

	/*
	 * If the caller doesn't specify the source address but
	 * the outgoing interface, use an address associated with
	 * the interface.
	 */
	if (pi && pi->ipi6_ifindex) {
		/* XXX boundary check is assumed to be already done. */
		ia6 = in6_ifawithscope(ifindex2ifnet[pi->ipi6_ifindex],
				       dst);
		if (ia6 == 0) {
			*errorp = EADDRNOTAVAIL;
			return(0);
		}
		return(&satosin6(&ia6->ia_addr)->sin6_addr);
	}

	/*
	 * If the destination address is a link-local unicast address or
	 * a multicast address, and if the outgoing interface is specified
	 * by the sin6_scope_id filed, use an address associated with the
	 * interface.
	 * XXX: We're now trying to define more specific semantics of
	 *      sin6_scope_id field, so this part will be rewritten in
	 *      the near future.
	 */
	if ((IN6_IS_ADDR_LINKLOCAL(dst) || IN6_IS_ADDR_MULTICAST(dst)) &&
	    dstsock->sin6_scope_id) {
		/*
		 * I'm not sure if boundary check for scope_id is done
		 * somewhere...
		 */
		if (dstsock->sin6_scope_id < 0 ||
		    if_index < dstsock->sin6_scope_id) {
			*errorp = ENXIO; /* XXX: better error? */
			return(0);
		}
		ia6 = in6_ifawithscope(ifindex2ifnet[dstsock->sin6_scope_id],
				       dst);
		if (ia6 == 0) {
			*errorp = EADDRNOTAVAIL;
			return(0);
		}
		return(&satosin6(&ia6->ia_addr)->sin6_addr);
	}

	/*
	 * If the destination address is a multicast address and
	 * the outgoing interface for the address is specified
	 * by the caller, use an address associated with the interface.
	 * There is a sanity check here; if the destination has node-local
	 * scope, the outgoing interfacde should be a loopback address.
	 * Even if the outgoing interface is not specified, we also
	 * choose a loopback interface as the outgoing interface.
	 */
	if (IN6_IS_ADDR_MULTICAST(dst)) {
		struct ifnet *ifp = mopts ? mopts->im6o_multicast_ifp : NULL;

		if (ifp == NULL && IN6_IS_ADDR_MC_NODELOCAL(dst)) {
			ifp = &loif[0];
		}

		if (ifp) {
			ia6 = in6_ifawithscope(ifp, dst);
			if (ia6 == 0) {
				*errorp = EADDRNOTAVAIL;
				return(0);
			}
			return(&satosin6(&ia6->ia_addr)->sin6_addr);
		}
	}

	/*
	 * If the next hop address for the packet is specified
	 * by caller, use an address associated with the route
	 * to the next hop.
	 */
	{
		struct sockaddr_in6 *sin6_next;
		struct rtentry *rt;

		if (opts && opts->ip6po_nexthop) {
			sin6_next = satosin6(opts->ip6po_nexthop);
			rt = nd6_lookup(&sin6_next->sin6_addr, 1, NULL);
			if (rt) {
				ia6 = in6_ifawithscope(rt->rt_ifp, dst);
				if (ia6 == 0)
					ia6 = ifatoia6(rt->rt_ifa);
			}
			if (ia6 == 0) {
				*errorp = EADDRNOTAVAIL;
				return(0);
			}
			return(&satosin6(&ia6->ia_addr)->sin6_addr);
		}
	}

	/*
	 * If route is known or can be allocated now,
	 * our src addr is taken from the i/f, else punt.
	 * Note that we should check the address family of the
	 * cached destination, in case of sharing the cache with IPv4.
	 */
	if (ro) {
		if (ro->ro_rt &&
		    (ro->ro_dst.sin6_family != AF_INET6 ||
		     !IN6_ARE_ADDR_EQUAL(&satosin6(&ro->ro_dst)->sin6_addr, dst))) {
			RTFREE(ro->ro_rt);
			ro->ro_rt = (struct rtentry *)0;
		}
		if (ro->ro_rt == (struct rtentry *)0 ||
		    ro->ro_rt->rt_ifp == (struct ifnet *)0) {
			struct sockaddr_in6 *sa6;

			/* No route yet, so try to acquire one */
			bzero(&ro->ro_dst, sizeof(struct sockaddr_in6));
			sa6 = (struct sockaddr_in6 *)&ro->ro_dst;
			sa6->sin6_family = AF_INET6;
			sa6->sin6_len = sizeof(struct sockaddr_in6);
			sa6->sin6_addr = *dst;
			sa6->sin6_scope_id = dstsock->sin6_scope_id;
			if (IN6_IS_ADDR_MULTICAST(dst)) {
				ro->ro_rt = rtalloc1(&((struct route *)ro)
						     ->ro_dst, 0);
			} else {
				rtalloc((struct route *)ro);
			}
		}

		/*
		 * in_pcbconnect() checks out IFF_LOOPBACK to skip using
		 * the address. But we don't know why it does so.
		 * It is necessary to ensure the scope even for lo0
		 * so doesn't check out IFF_LOOPBACK.
		 */

		if (ro->ro_rt) {
			ia6 = in6_ifawithscope(ro->ro_rt->rt_ifa->ifa_ifp, dst);
			if (ia6 == 0) /* xxx scope error ?*/
				ia6 = ifatoia6(ro->ro_rt->rt_ifa);
		}
#if 0
		/*
		 * xxx The followings are necessary? (kazu)
		 * I don't think so.
		 * It's for SO_DONTROUTE option in IPv4.(jinmei)
		 */
		if (ia6 == 0) {
			struct sockaddr_in6 sin6 = {sizeof(sin6), AF_INET6, 0};

			sin6->sin6_addr = *dst;

			ia6 = ifatoia6(ifa_ifwithdstaddr(sin6tosa(&sin6)));
			if (ia6 == 0)
				ia6 = ifatoia6(ifa_ifwithnet(sin6tosa(&sin6)));
			if (ia6 == 0)
				return(0);
			return(&satosin6(&ia6->ia_addr)->sin6_addr);
		}
#endif /* 0 */
		if (ia6 == 0) {
			*errorp = EHOSTUNREACH;	/* no route */
			return(0);
		}
		return(&satosin6(&ia6->ia_addr)->sin6_addr);
	}

	*errorp = EADDRNOTAVAIL;
	return(0);
}

/*
 * Default hop limit selection. The precedence is as follows:
 * 1. Hoplimit value specified via ioctl.
 * 2. (If the outgoing interface is detected) the current
 *     hop limit of the interface specified by router advertisement.
 * 3. The system default hoplimit.
*/
int
in6_selecthlim(in6p, ifp)
	struct in6pcb *in6p;
	struct ifnet *ifp;
{
	if (in6p && in6p->in6p_hops >= 0)
		return(in6p->in6p_hops);
	else if (ifp)
		return(ND_IFINFO(ifp)->chlim);
	else
		return(ip6_defhlim);
}

/*
 * Find an empty port and set it to the specified PCB.
 */
int
in6_pcbsetport(laddr, in6p, p)
	struct in6_addr *laddr;
	struct in6pcb *in6p;
	struct proc *p;
{
	struct socket *so = in6p->in6p_socket;
	struct in6pcb *head = in6p->in6p_head;
	u_int16_t last_port, lport = 0;
	int wild = 0;
	void *t;
	u_int16_t min, max;

	/* XXX: this is redundant when called from in6_pcbbind */
	if ((so->so_options & (SO_REUSEADDR|SO_REUSEPORT)) == 0 &&
	   ((so->so_proto->pr_flags & PR_CONNREQUIRED) == 0 ||
	    (so->so_options & SO_ACCEPTCONN) == 0))
		wild = IN6PLOOKUP_WILDCARD;

	if (in6p->in6p_flags & IN6P_LOWPORT) {
#ifndef IPNOPRIVPORTS
		if (p == 0 || (suser(p->p_ucred, &p->p_acflag) != 0))
			return (EACCES);
#endif
		min = ip6_lowportmin;
		max = ip6_lowportmax;
	} else {
		min = ip6_anonportmin;
		max = ip6_anonportmax;
	}

	/* value out of range */
	if (head->in6p_lport < min)
		head->in6p_lport = min;
	else if (head->in6p_lport > max)
		head->in6p_lport = min;
	last_port = head->in6p_lport;
	goto startover;	/*to randomize*/
	for (;;) {
		lport = htons(head->in6p_lport);
		if (IN6_IS_ADDR_V4MAPPED(laddr)) {
#if 0
			t = in_pcblookup_bind(&tcbtable,
					      (struct in_addr *)&in6p->in6p_laddr.s6_addr32[3],
					      lport);
#else
			t = NULL;
#endif
		} else {
			t = in6_pcblookup(head, &zeroin6_addr, 0, laddr,
					  lport, wild);
		}
		if (t == 0)
			break;
	  startover:
		if (head->in6p_lport >= max)
			head->in6p_lport = min;
		else
			head->in6p_lport++;
		if (head->in6p_lport == last_port)
			return (EADDRINUSE);
	}

	in6p->in6p_lport = lport;
	return(0);		/* success */
}

/*
 * generate kernel-internal form (scopeid embedded into s6_addr16[1]).
 * If the address scope of is link-local, embed the interface index in the
 * address.  The routine determines our precedence
 * between advanced API scope/interface specification and basic API
 * specification.
 *
 * this function should be nuked in the future, when we get rid of
 * embedded scopeid thing.
 *
 * XXX actually, it is over-specification to return ifp against sin6_scope_id.
 * there can be multiple interfaces that belong to a particular scope zone
 * (in specification, we have 1:N mapping between a scope zone and interfaces).
 * we may want to change the function to return something other than ifp.
 */
int
in6_embedscope(in6, sin6, in6p, ifpp)
	struct in6_addr *in6;
	const struct sockaddr_in6 *sin6;
	struct in6pcb *in6p;
	struct ifnet **ifpp;
{
	struct ifnet *ifp = NULL;
	u_int32_t scopeid;

	*in6 = sin6->sin6_addr;
	scopeid = sin6->sin6_scope_id;
	if (ifpp)
		*ifpp = NULL;

	/*
	 * don't try to read sin6->sin6_addr beyond here, since the caller may
	 * ask us to overwrite existing sockaddr_in6
	 */

#ifdef ENABLE_DEFAULT_SCOPE
	if (scopeid == 0)
		scopeid = scope6_addr2default(in6);
#endif

	if (IN6_IS_SCOPE_LINKLOCAL(in6)) {
		struct in6_pktinfo *pi;

		/*
		 * KAME assumption: link id == interface id
		 */

		if (in6p && in6p->in6p_outputopts &&
		    (pi = in6p->in6p_outputopts->ip6po_pktinfo) &&
		    pi->ipi6_ifindex) {
			ifp = ifindex2ifnet[pi->ipi6_ifindex];
			in6->s6_addr16[1] = htons(pi->ipi6_ifindex);
		} else if (in6p && IN6_IS_ADDR_MULTICAST(in6) &&
			   in6p->in6p_moptions &&
			   in6p->in6p_moptions->im6o_multicast_ifp) {
			ifp = in6p->in6p_moptions->im6o_multicast_ifp;
			in6->s6_addr16[1] = htons(ifp->if_index);
		} else if (scopeid) {
			/* boundary check */
			if (scopeid < 0 || if_index < scopeid)
				return ENXIO;  /* XXX EINVAL? */
			ifp = ifindex2ifnet[scopeid];
			/* XXX assignment to 16bit from 32bit variable */
			in6->s6_addr16[1] = htons(scopeid & 0xffff);
		}

		if (ifpp)
			*ifpp = ifp;
	}

	return 0;
}

/*
 * generate standard sockaddr_in6 from embedded form.
 * touches sin6_addr and sin6_scope_id only.
 *
 * this function should be nuked in the future, when we get rid of
 * embedded scopeid thing.
 */
int
in6_recoverscope(sin6, in6, ifp)
	struct sockaddr_in6 *sin6;
	const struct in6_addr *in6;
	struct ifnet *ifp;
{
	u_int32_t scopeid;

	sin6->sin6_addr = *in6;

	/*
	 * don't try to read *in6 beyond here, since the caller may
	 * ask us to overwrite existing sockaddr_in6
	 */

	sin6->sin6_scope_id = 0;
	if (IN6_IS_SCOPE_LINKLOCAL(in6)) {
		/*
		 * KAME assumption: link id == interface id
		 */
		scopeid = ntohs(sin6->sin6_addr.s6_addr16[1]);
		if (scopeid) {
			/* sanity check */
			if (scopeid < 0 || if_index < scopeid)
				return ENXIO;
			if (ifp && ifp->if_index != scopeid)
				return ENXIO;
			sin6->sin6_addr.s6_addr16[1] = 0;
			sin6->sin6_scope_id = scopeid;
		}
	}

	return 0;
}

/*
 * just clear the embedded scope identifer.
 */
void
in6_clearscope(addr)
	struct in6_addr *addr;
{
	if (IN6_IS_SCOPE_LINKLOCAL(addr))
		addr->s6_addr16[1] = 0;
}