Home | History | Annotate | Line # | Download | only in netinet6
in6_src.c revision 1.49.4.1
      1 /*	$NetBSD: in6_src.c,v 1.49.4.1 2011/05/31 03:05:08 rmind Exp $	*/
      2 /*	$KAME: in6_src.c,v 1.159 2005/10/19 01:40:32 t-momose Exp $	*/
      3 
      4 /*
      5  * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
      6  * All rights reserved.
      7  *
      8  * Redistribution and use in source and binary forms, with or without
      9  * modification, are permitted provided that the following conditions
     10  * are met:
     11  * 1. Redistributions of source code must retain the above copyright
     12  *    notice, this list of conditions and the following disclaimer.
     13  * 2. Redistributions in binary form must reproduce the above copyright
     14  *    notice, this list of conditions and the following disclaimer in the
     15  *    documentation and/or other materials provided with the distribution.
     16  * 3. Neither the name of the project nor the names of its contributors
     17  *    may be used to endorse or promote products derived from this software
     18  *    without specific prior written permission.
     19  *
     20  * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
     21  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     22  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     23  * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
     24  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     25  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     26  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     27  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     28  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     29  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     30  * SUCH DAMAGE.
     31  */
     32 
     33 /*
     34  * Copyright (c) 1982, 1986, 1991, 1993
     35  *	The Regents of the University of California.  All rights reserved.
     36  *
     37  * Redistribution and use in source and binary forms, with or without
     38  * modification, are permitted provided that the following conditions
     39  * are met:
     40  * 1. Redistributions of source code must retain the above copyright
     41  *    notice, this list of conditions and the following disclaimer.
     42  * 2. Redistributions in binary form must reproduce the above copyright
     43  *    notice, this list of conditions and the following disclaimer in the
     44  *    documentation and/or other materials provided with the distribution.
     45  * 3. All advertising materials mentioning features or use of this software
     46  *    must display the following acknowledgement:
     47  *	This product includes software developed by the University of
     48  *	California, Berkeley and its contributors.
     49  * 4. Neither the name of the University nor the names of its contributors
     50  *    may be used to endorse or promote products derived from this software
     51  *    without specific prior written permission.
     52  *
     53  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
     54  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     55  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     56  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
     57  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     58  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     59  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     60  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     61  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     62  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     63  * SUCH DAMAGE.
     64  *
     65  *	@(#)in_pcb.c	8.2 (Berkeley) 1/4/94
     66  */
     67 
     68 #include <sys/cdefs.h>
     69 __KERNEL_RCSID(0, "$NetBSD: in6_src.c,v 1.49.4.1 2011/05/31 03:05:08 rmind Exp $");
     70 
     71 #include "opt_inet.h"
     72 
     73 #include <sys/param.h>
     74 #include <sys/systm.h>
     75 #include <sys/malloc.h>
     76 #include <sys/mbuf.h>
     77 #include <sys/protosw.h>
     78 #include <sys/socket.h>
     79 #include <sys/socketvar.h>
     80 #include <sys/ioctl.h>
     81 #include <sys/errno.h>
     82 #include <sys/time.h>
     83 #include <sys/kernel.h>
     84 #include <sys/proc.h>
     85 #include <sys/kauth.h>
     86 
     87 #include <net/if.h>
     88 #include <net/if_types.h>
     89 #include <net/route.h>
     90 
     91 #include <netinet/in.h>
     92 #include <netinet/in_var.h>
     93 #include <netinet/in_systm.h>
     94 #include <netinet/ip.h>
     95 #include <netinet/in_pcb.h>
     96 #include <netinet6/in6_var.h>
     97 #include <netinet/ip6.h>
     98 #include <netinet6/in6_pcb.h>
     99 #include <netinet6/ip6_var.h>
    100 #include <netinet6/ip6_private.h>
    101 #include <netinet6/nd6.h>
    102 #include <netinet6/scope6_var.h>
    103 
    104 #include <net/net_osdep.h>
    105 
    106 #ifdef MIP6
    107 #include <netinet6/mip6.h>
    108 #include <netinet6/mip6_var.h>
    109 #include "mip.h"
    110 #if NMIP > 0
    111 #include <net/if_mip.h>
    112 #endif /* NMIP > 0 */
    113 #endif /* MIP6 */
    114 
    115 #include <netinet/tcp_vtw.h>
    116 
    117 #define ADDR_LABEL_NOTAPP (-1)
    118 struct in6_addrpolicy defaultaddrpolicy;
    119 
    120 #ifdef notyet /* until introducing ND extensions and address selection */
    121 int ip6_prefer_tempaddr = 0;
    122 #endif
    123 
    124 static int selectroute(struct sockaddr_in6 *, struct ip6_pktopts *,
    125 	struct ip6_moptions *, struct route *, struct ifnet **,
    126 	struct rtentry **, int, int);
    127 static int in6_selectif(struct sockaddr_in6 *, struct ip6_pktopts *,
    128 	struct ip6_moptions *, struct route *, struct ifnet **);
    129 
    130 static struct in6_addrpolicy *lookup_addrsel_policy(struct sockaddr_in6 *);
    131 
    132 static void init_policy_queue(void);
    133 static int add_addrsel_policyent(struct in6_addrpolicy *);
    134 static int delete_addrsel_policyent(struct in6_addrpolicy *);
    135 static int walk_addrsel_policy(int (*)(struct in6_addrpolicy *, void *),
    136 				    void *);
    137 static int dump_addrsel_policyent(struct in6_addrpolicy *, void *);
    138 static struct in6_addrpolicy *match_addrsel_policy(struct sockaddr_in6 *);
    139 
    140 /*
    141  * Return an IPv6 address, which is the most appropriate for a given
    142  * destination and user specified options.
    143  * If necessary, this function lookups the routing table and returns
    144  * an entry to the caller for later use.
    145  */
    146 #if 0				/* diabled ad-hoc */
    147 #define REPLACE(r) do {\
    148 	if ((r) < sizeof(ip6stat.ip6s_sources_rule) / \
    149 		sizeof(ip6stat.ip6s_sources_rule[0])) /* check for safety */ \
    150 		ip6stat.ip6s_sources_rule[(r)]++; \
    151 	/* printf("in6_selectsrc: replace %s with %s by %d\n", ia_best ? ip6_sprintf(&ia_best->ia_addr.sin6_addr) : "none", ip6_sprintf(&ia->ia_addr.sin6_addr), (r)); */ \
    152 	goto replace; \
    153 } while(0)
    154 #define NEXT(r) do {\
    155 	if ((r) < sizeof(ip6stat.ip6s_sources_rule) / \
    156 		sizeof(ip6stat.ip6s_sources_rule[0])) /* check for safety */ \
    157 		ip6stat.ip6s_sources_rule[(r)]++; \
    158 	/* printf("in6_selectsrc: keep %s against %s by %d\n", ia_best ? ip6_sprintf(&ia_best->ia_addr.sin6_addr) : "none", ip6_sprintf(&ia->ia_addr.sin6_addr), (r)); */ \
    159 	goto next; 		/* XXX: we can't use 'continue' here */ \
    160 } while(0)
    161 #define BREAK(r) do { \
    162 	if ((r) < sizeof(ip6stat.ip6s_sources_rule) / \
    163 		sizeof(ip6stat.ip6s_sources_rule[0])) /* check for safety */ \
    164 		ip6stat.ip6s_sources_rule[(r)]++; \
    165 	goto out; 		/* XXX: we can't use 'break' here */ \
    166 } while(0)
    167 #else
    168 #define REPLACE(r) goto replace
    169 #define NEXT(r) goto next
    170 #define BREAK(r) goto out
    171 #endif
    172 
    173 struct in6_addr *
    174 in6_selectsrc(struct sockaddr_in6 *dstsock, struct ip6_pktopts *opts,
    175 	struct ip6_moptions *mopts, struct route *ro, struct in6_addr *laddr,
    176 	struct ifnet **ifpp, int *errorp)
    177 {
    178 	struct in6_addr dst;
    179 	struct ifnet *ifp = NULL;
    180 	struct in6_ifaddr *ia = NULL, *ia_best = NULL;
    181 	struct in6_pktinfo *pi = NULL;
    182 	int dst_scope = -1, best_scope = -1, best_matchlen = -1;
    183 	struct in6_addrpolicy *dst_policy = NULL, *best_policy = NULL;
    184 	u_int32_t odstzone;
    185 	int error;
    186 #ifdef notyet /* until introducing ND extensions and address selection */
    187 	int prefer_tempaddr;
    188 #endif
    189 #if defined(MIP6) && NMIP > 0
    190 	u_int8_t ip6po_usecoa = 0;
    191 #endif /* MIP6 && NMIP > 0 */
    192 
    193 	dst = dstsock->sin6_addr; /* make a copy for local operation */
    194 	*errorp = 0;
    195 	if (ifpp)
    196 		*ifpp = NULL;
    197 
    198 	/*
    199 	 * Try to determine the outgoing interface for the given destination.
    200 	 * We do this regardless of whether the socket is bound, since the
    201 	 * caller may need this information as a side effect of the call
    202 	 * to this function (e.g., for identifying the appropriate scope zone
    203 	 * ID).
    204 	 */
    205 	error = in6_selectif(dstsock, opts, mopts, ro, &ifp);
    206 	if (ifpp)
    207 		*ifpp = ifp;
    208 
    209 	/*
    210 	 * If the source address is explicitly specified by the caller,
    211 	 * check if the requested source address is indeed a unicast address
    212 	 * assigned to the node, and can be used as the packet's source
    213 	 * address.  If everything is okay, use the address as source.
    214 	 */
    215 	if (opts && (pi = opts->ip6po_pktinfo) &&
    216 	    !IN6_IS_ADDR_UNSPECIFIED(&pi->ipi6_addr)) {
    217 		struct sockaddr_in6 srcsock;
    218 		struct in6_ifaddr *ia6;
    219 
    220 		/*
    221 		 * Determine the appropriate zone id of the source based on
    222 		 * the zone of the destination and the outgoing interface.
    223 		 * If the specified address is ambiguous wrt the scope zone,
    224 		 * the interface must be specified; otherwise, ifa_ifwithaddr()
    225 		 * will fail matching the address.
    226 		 */
    227 		memset(&srcsock, 0, sizeof(srcsock));
    228 		srcsock.sin6_family = AF_INET6;
    229 		srcsock.sin6_len = sizeof(srcsock);
    230 		srcsock.sin6_addr = pi->ipi6_addr;
    231 		if (ifp) {
    232 			*errorp = in6_setscope(&srcsock.sin6_addr, ifp, NULL);
    233 			if (*errorp != 0)
    234 				return (NULL);
    235 		}
    236 
    237 		ia6 = (struct in6_ifaddr *)ifa_ifwithaddr((struct sockaddr *)(&srcsock));
    238 		if (ia6 == NULL ||
    239 		    (ia6->ia6_flags & (IN6_IFF_ANYCAST | IN6_IFF_NOTREADY))) {
    240 			*errorp = EADDRNOTAVAIL;
    241 			return (NULL);
    242 		}
    243 		pi->ipi6_addr = srcsock.sin6_addr; /* XXX: this overrides pi */
    244 		if (ifpp)
    245 			*ifpp = ifp;
    246 		return (&ia6->ia_addr.sin6_addr);
    247 	}
    248 
    249 	/*
    250 	 * If the socket has already bound the source, just use it.  We don't
    251 	 * care at the moment whether in6_selectif() succeeded above, even
    252 	 * though it would eventually cause an error.
    253 	 */
    254 	if (laddr && !IN6_IS_ADDR_UNSPECIFIED(laddr))
    255 		return (laddr);
    256 
    257 	/*
    258 	 * The outgoing interface is crucial in the general selection procedure
    259 	 * below.  If it is not known at this point, we fail.
    260 	 */
    261 	if (ifp == NULL) {
    262 		*errorp = error;
    263 		return (NULL);
    264 	}
    265 
    266 	/*
    267 	 * If the address is not yet determined, choose the best one based on
    268 	 * the outgoing interface and the destination address.
    269 	 */
    270 
    271 #if defined(MIP6) && NMIP > 0
    272 	/*
    273 	 * a caller can specify IP6PO_USECOA to not to use a home
    274 	 * address.  for example, the case that the neighbour
    275 	 * unreachability detection to the global address.
    276 	 */
    277 	if (opts != NULL &&
    278 	    (opts->ip6po_flags & IP6PO_USECOA) != 0) {
    279 		ip6po_usecoa = 1;
    280 	}
    281 #endif /* MIP6 && NMIP > 0 */
    282 
    283 #ifdef DIAGNOSTIC
    284 	if (ifp == NULL)	/* this should not happen */
    285 		panic("in6_selectsrc: NULL ifp");
    286 #endif
    287 	*errorp = in6_setscope(&dst, ifp, &odstzone);
    288 	if (*errorp != 0)
    289 		return (NULL);
    290 
    291 	for (ia = in6_ifaddr; ia; ia = ia->ia_next) {
    292 		int new_scope = -1, new_matchlen = -1;
    293 		struct in6_addrpolicy *new_policy = NULL;
    294 		u_int32_t srczone, osrczone, dstzone;
    295 		struct in6_addr src;
    296 		struct ifnet *ifp1 = ia->ia_ifp;
    297 
    298 		/*
    299 		 * We'll never take an address that breaks the scope zone
    300 		 * of the destination.  We also skip an address if its zone
    301 		 * does not contain the outgoing interface.
    302 		 * XXX: we should probably use sin6_scope_id here.
    303 		 */
    304 		if (in6_setscope(&dst, ifp1, &dstzone) ||
    305 		    odstzone != dstzone) {
    306 			continue;
    307 		}
    308 		src = ia->ia_addr.sin6_addr;
    309 		if (in6_setscope(&src, ifp, &osrczone) ||
    310 		    in6_setscope(&src, ifp1, &srczone) ||
    311 		    osrczone != srczone) {
    312 			continue;
    313 		}
    314 
    315 		/* avoid unusable addresses */
    316 		if ((ia->ia6_flags &
    317 		     (IN6_IFF_NOTREADY | IN6_IFF_ANYCAST | IN6_IFF_DETACHED))) {
    318 				continue;
    319 		}
    320 		if (!ip6_use_deprecated && IFA6_IS_DEPRECATED(ia))
    321 			continue;
    322 
    323 #if defined(MIP6) && NMIP > 0
    324 		/* avoid unusable home addresses. */
    325 		if ((ia->ia6_flags & IN6_IFF_HOME) &&
    326 		    !mip6_ifa6_is_addr_valid_hoa(ia))
    327 			continue;
    328 #endif /* MIP6 && NMIP > 0 */
    329 
    330 		/* Rule 1: Prefer same address */
    331 		if (IN6_ARE_ADDR_EQUAL(&dst, &ia->ia_addr.sin6_addr)) {
    332 			ia_best = ia;
    333 			BREAK(1); /* there should be no better candidate */
    334 		}
    335 
    336 		if (ia_best == NULL)
    337 			REPLACE(0);
    338 
    339 		/* Rule 2: Prefer appropriate scope */
    340 		if (dst_scope < 0)
    341 			dst_scope = in6_addrscope(&dst);
    342 		new_scope = in6_addrscope(&ia->ia_addr.sin6_addr);
    343 		if (IN6_ARE_SCOPE_CMP(best_scope, new_scope) < 0) {
    344 			if (IN6_ARE_SCOPE_CMP(best_scope, dst_scope) < 0)
    345 				REPLACE(2);
    346 			NEXT(2);
    347 		} else if (IN6_ARE_SCOPE_CMP(new_scope, best_scope) < 0) {
    348 			if (IN6_ARE_SCOPE_CMP(new_scope, dst_scope) < 0)
    349 				NEXT(2);
    350 			REPLACE(2);
    351 		}
    352 
    353 		/*
    354 		 * Rule 3: Avoid deprecated addresses.  Note that the case of
    355 		 * !ip6_use_deprecated is already rejected above.
    356 		 */
    357 		if (!IFA6_IS_DEPRECATED(ia_best) && IFA6_IS_DEPRECATED(ia))
    358 			NEXT(3);
    359 		if (IFA6_IS_DEPRECATED(ia_best) && !IFA6_IS_DEPRECATED(ia))
    360 			REPLACE(3);
    361 
    362 		/* Rule 4: Prefer home addresses */
    363 #if defined(MIP6) && NMIP > 0
    364 		if (!MIP6_IS_MN)
    365 			goto skip_rule4;
    366 
    367 		if ((ia_best->ia6_flags & IN6_IFF_HOME) == 0 &&
    368 		    (ia->ia6_flags & IN6_IFF_HOME) == 0) {
    369 			/* both address are not home addresses. */
    370 			goto skip_rule4;
    371 		}
    372 
    373 		/*
    374 		 * If SA is simultaneously a home address and care-of
    375 		 * address and SB is not, then prefer SA. Similarly,
    376 		 * if SB is simultaneously a home address and care-of
    377 		 * address and SA is not, then prefer SB.
    378 		 */
    379 		if (((ia_best->ia6_flags & IN6_IFF_HOME) != 0 &&
    380 			ia_best->ia_ifp->if_type != IFT_MIP)
    381 		    &&
    382 		    ((ia->ia6_flags & IN6_IFF_HOME) != 0 &&
    383 			ia->ia_ifp->if_type == IFT_MIP))
    384 			NEXT(4);
    385 		if (((ia_best->ia6_flags & IN6_IFF_HOME) != 0 &&
    386 			ia_best->ia_ifp->if_type == IFT_MIP)
    387 		    &&
    388 		    ((ia->ia6_flags & IN6_IFF_HOME) != 0 &&
    389 			ia->ia_ifp->if_type != IFT_MIP))
    390 			REPLACE(4);
    391 		if (ip6po_usecoa == 0) {
    392 			/*
    393 			 * If SA is just a home address and SB is just
    394 			 * a care-of address, then prefer
    395 			 * SA. Similarly, if SB is just a home address
    396 			 * and SA is just a care-of address, then
    397 			 * prefer SB.
    398 			 */
    399 			if ((ia_best->ia6_flags & IN6_IFF_HOME) != 0 &&
    400 			    (ia->ia6_flags & IN6_IFF_HOME) == 0) {
    401 				NEXT(4);
    402 			}
    403 			if ((ia_best->ia6_flags & IN6_IFF_HOME) == 0 &&
    404 			    (ia->ia6_flags & IN6_IFF_HOME) != 0) {
    405 				REPLACE(4);
    406 			}
    407 		} else {
    408 			/*
    409 			 * a sender don't want to use a home address
    410 			 * because:
    411 			 *
    412 			 * 1) we cannot use.  (ex. NS or NA to global
    413 			 * addresses.)
    414 			 *
    415 			 * 2) a user specified not to use.
    416 			 * (ex. mip6control -u)
    417 			 */
    418 			if ((ia_best->ia6_flags & IN6_IFF_HOME) == 0 &&
    419 			    (ia->ia6_flags & IN6_IFF_HOME) != 0) {
    420 				/* XXX breaks stat */
    421 				NEXT(0);
    422 			}
    423 			if ((ia_best->ia6_flags & IN6_IFF_HOME) != 0 &&
    424 			    (ia->ia6_flags & IN6_IFF_HOME) == 0) {
    425 				/* XXX breaks stat */
    426 				REPLACE(0);
    427 			}
    428 		}
    429 	skip_rule4:
    430 #endif /* MIP6 && NMIP > 0 */
    431 
    432 		/* Rule 5: Prefer outgoing interface */
    433 		if (ia_best->ia_ifp == ifp && ia->ia_ifp != ifp)
    434 			NEXT(5);
    435 		if (ia_best->ia_ifp != ifp && ia->ia_ifp == ifp)
    436 			REPLACE(5);
    437 
    438 		/*
    439 		 * Rule 6: Prefer matching label
    440 		 * Note that best_policy should be non-NULL here.
    441 		 */
    442 		if (dst_policy == NULL)
    443 			dst_policy = lookup_addrsel_policy(dstsock);
    444 		if (dst_policy->label != ADDR_LABEL_NOTAPP) {
    445 			new_policy = lookup_addrsel_policy(&ia->ia_addr);
    446 			if (dst_policy->label == best_policy->label &&
    447 			    dst_policy->label != new_policy->label)
    448 				NEXT(6);
    449 			if (dst_policy->label != best_policy->label &&
    450 			    dst_policy->label == new_policy->label)
    451 				REPLACE(6);
    452 		}
    453 
    454 		/*
    455 		 * Rule 7: Prefer public addresses.
    456 		 * We allow users to reverse the logic by configuring
    457 		 * a sysctl variable, so that privacy conscious users can
    458 		 * always prefer temporary addresses.
    459 		 */
    460 #ifdef notyet /* until introducing ND extensions and address selection */
    461 		if (opts == NULL ||
    462 		    opts->ip6po_prefer_tempaddr == IP6PO_TEMPADDR_SYSTEM) {
    463 			prefer_tempaddr = ip6_prefer_tempaddr;
    464 		} else if (opts->ip6po_prefer_tempaddr ==
    465 		    IP6PO_TEMPADDR_NOTPREFER) {
    466 			prefer_tempaddr = 0;
    467 		} else
    468 			prefer_tempaddr = 1;
    469 		if (!(ia_best->ia6_flags & IN6_IFF_TEMPORARY) &&
    470 		    (ia->ia6_flags & IN6_IFF_TEMPORARY)) {
    471 			if (prefer_tempaddr)
    472 				REPLACE(7);
    473 			else
    474 				NEXT(7);
    475 		}
    476 		if ((ia_best->ia6_flags & IN6_IFF_TEMPORARY) &&
    477 		    !(ia->ia6_flags & IN6_IFF_TEMPORARY)) {
    478 			if (prefer_tempaddr)
    479 				NEXT(7);
    480 			else
    481 				REPLACE(7);
    482 		}
    483 #endif
    484 
    485 		/*
    486 		 * Rule 8: prefer addresses on alive interfaces.
    487 		 * This is a KAME specific rule.
    488 		 */
    489 		if ((ia_best->ia_ifp->if_flags & IFF_UP) &&
    490 		    !(ia->ia_ifp->if_flags & IFF_UP))
    491 			NEXT(8);
    492 		if (!(ia_best->ia_ifp->if_flags & IFF_UP) &&
    493 		    (ia->ia_ifp->if_flags & IFF_UP))
    494 			REPLACE(8);
    495 
    496 		/*
    497 		 * Rule 9: prefer addresses on "preferred" interfaces.
    498 		 * This is a KAME specific rule.
    499 		 */
    500 #ifdef notyet			/* until introducing address selection */
    501 #define NDI_BEST ND_IFINFO(ia_best->ia_ifp)
    502 #define NDI_NEW  ND_IFINFO(ia->ia_ifp)
    503 		if ((NDI_BEST->flags & ND6_IFF_PREFER_SOURCE) &&
    504 		    !(NDI_NEW->flags & ND6_IFF_PREFER_SOURCE))
    505 			NEXT(9);
    506 		if (!(NDI_BEST->flags & ND6_IFF_PREFER_SOURCE) &&
    507 		    (NDI_NEW->flags & ND6_IFF_PREFER_SOURCE))
    508 			REPLACE(9);
    509 #undef NDI_BEST
    510 #undef NDI_NEW
    511 #endif
    512 
    513 		/*
    514 		 * Rule 14: Use longest matching prefix.
    515 		 * Note: in the address selection draft, this rule is
    516 		 * documented as "Rule 8".  However, since it is also
    517 		 * documented that this rule can be overridden, we assign
    518 		 * a large number so that it is easy to assign smaller numbers
    519 		 * to more preferred rules.
    520 		 */
    521 		new_matchlen = in6_matchlen(&ia->ia_addr.sin6_addr, &dst);
    522 		if (best_matchlen < new_matchlen)
    523 			REPLACE(14);
    524 		if (new_matchlen < best_matchlen)
    525 			NEXT(14);
    526 
    527 		/* Rule 15 is reserved. */
    528 
    529 		/*
    530 		 * Last resort: just keep the current candidate.
    531 		 * Or, do we need more rules?
    532 		 */
    533 		continue;
    534 
    535 	  replace:
    536 		ia_best = ia;
    537 		best_scope = (new_scope >= 0 ? new_scope :
    538 			      in6_addrscope(&ia_best->ia_addr.sin6_addr));
    539 		best_policy = (new_policy ? new_policy :
    540 			       lookup_addrsel_policy(&ia_best->ia_addr));
    541 		best_matchlen = (new_matchlen >= 0 ? new_matchlen :
    542 				 in6_matchlen(&ia_best->ia_addr.sin6_addr,
    543 					      &dst));
    544 
    545 	  next:
    546 		continue;
    547 
    548 	  out:
    549 		break;
    550 	}
    551 
    552 	if ((ia = ia_best) == NULL) {
    553 		*errorp = EADDRNOTAVAIL;
    554 		return (NULL);
    555 	}
    556 
    557 	return (&ia->ia_addr.sin6_addr);
    558 }
    559 #undef REPLACE
    560 #undef BREAK
    561 #undef NEXT
    562 
    563 static int
    564 selectroute(struct sockaddr_in6 *dstsock, struct ip6_pktopts *opts,
    565 	struct ip6_moptions *mopts, struct route *ro, struct ifnet **retifp,
    566 	struct rtentry **retrt, int clone, int norouteok)
    567 {
    568 	int error = 0;
    569 	struct ifnet *ifp = NULL;
    570 	struct rtentry *rt = NULL;
    571 	struct sockaddr_in6 *sin6_next;
    572 	struct in6_pktinfo *pi = NULL;
    573 	struct in6_addr *dst;
    574 
    575 	dst = &dstsock->sin6_addr;
    576 
    577 #if 0
    578 	if (dstsock->sin6_addr.s6_addr32[0] == 0 &&
    579 	    dstsock->sin6_addr.s6_addr32[1] == 0 &&
    580 	    !IN6_IS_ADDR_LOOPBACK(&dstsock->sin6_addr)) {
    581 		printf("in6_selectroute: strange destination %s\n",
    582 		       ip6_sprintf(&dstsock->sin6_addr));
    583 	} else {
    584 		printf("in6_selectroute: destination = %s%%%d\n",
    585 		       ip6_sprintf(&dstsock->sin6_addr),
    586 		       dstsock->sin6_scope_id); /* for debug */
    587 	}
    588 #endif
    589 
    590 	/* If the caller specify the outgoing interface explicitly, use it. */
    591 	if (opts && (pi = opts->ip6po_pktinfo) != NULL && pi->ipi6_ifindex) {
    592 		/* XXX boundary check is assumed to be already done. */
    593 		ifp = ifindex2ifnet[pi->ipi6_ifindex];
    594 		if (ifp != NULL &&
    595 		    (norouteok || retrt == NULL ||
    596 		    IN6_IS_ADDR_MULTICAST(dst))) {
    597 			/*
    598 			 * we do not have to check or get the route for
    599 			 * multicast.
    600 			 */
    601 			goto done;
    602 		} else
    603 			goto getroute;
    604 	}
    605 
    606 	/*
    607 	 * If the destination address is a multicast address and the outgoing
    608 	 * interface for the address is specified by the caller, use it.
    609 	 */
    610 	if (IN6_IS_ADDR_MULTICAST(dst) &&
    611 	    mopts != NULL && (ifp = mopts->im6o_multicast_ifp) != NULL) {
    612 		goto done; /* we do not need a route for multicast. */
    613 	}
    614 
    615   getroute:
    616 	/*
    617 	 * If the next hop address for the packet is specified by the caller,
    618 	 * use it as the gateway.
    619 	 */
    620 	if (opts && opts->ip6po_nexthop) {
    621 		struct route *ron;
    622 
    623 		sin6_next = satosin6(opts->ip6po_nexthop);
    624 
    625 		/* at this moment, we only support AF_INET6 next hops */
    626 		if (sin6_next->sin6_family != AF_INET6) {
    627 			error = EAFNOSUPPORT; /* or should we proceed? */
    628 			goto done;
    629 		}
    630 
    631 		/*
    632 		 * If the next hop is an IPv6 address, then the node identified
    633 		 * by that address must be a neighbor of the sending host.
    634 		 */
    635 		ron = &opts->ip6po_nextroute;
    636 		if ((rt = rtcache_lookup(ron, sin6tosa(sin6_next))) == NULL ||
    637 		    (rt->rt_flags & RTF_GATEWAY) != 0 ||
    638 		    !nd6_is_addr_neighbor(sin6_next, rt->rt_ifp)) {
    639 			rtcache_free(ron);
    640 			error = EHOSTUNREACH;
    641 			goto done;
    642 		}
    643 		ifp = rt->rt_ifp;
    644 
    645 		/*
    646 		 * When cloning is required, try to allocate a route to the
    647 		 * destination so that the caller can store path MTU
    648 		 * information.
    649 		 */
    650 		if (!clone)
    651 			goto done;
    652 	}
    653 
    654 	/*
    655 	 * Use a cached route if it exists and is valid, else try to allocate
    656 	 * a new one.  Note that we should check the address family of the
    657 	 * cached destination, in case of sharing the cache with IPv4.
    658 	 */
    659 	if (ro != NULL) {
    660 		union {
    661 			struct sockaddr		dst;
    662 			struct sockaddr_in6	dst6;
    663 		} u;
    664 
    665 		/* No route yet, so try to acquire one */
    666 		u.dst6 = *dstsock;
    667 		u.dst6.sin6_scope_id = 0;
    668 		rt = rtcache_lookup1(ro, &u.dst, clone);
    669 
    670 		/*
    671 		 * do not care about the result if we have the nexthop
    672 		 * explicitly specified.
    673 		 */
    674 		if (opts && opts->ip6po_nexthop)
    675 			goto done;
    676 
    677 		if (rt == NULL)
    678 			error = EHOSTUNREACH;
    679 		else
    680 			ifp = rt->rt_ifp;
    681 
    682 		/*
    683 		 * Check if the outgoing interface conflicts with
    684 		 * the interface specified by ipi6_ifindex (if specified).
    685 		 * Note that loopback interface is always okay.
    686 		 * (this may happen when we are sending a packet to one of
    687 		 *  our own addresses.)
    688 		 */
    689 		if (opts && opts->ip6po_pktinfo &&
    690 		    opts->ip6po_pktinfo->ipi6_ifindex) {
    691 			if (!(ifp->if_flags & IFF_LOOPBACK) &&
    692 			    ifp->if_index !=
    693 			    opts->ip6po_pktinfo->ipi6_ifindex) {
    694 				error = EHOSTUNREACH;
    695 				goto done;
    696 			}
    697 		}
    698 	}
    699 
    700   done:
    701 	if (ifp == NULL && rt == NULL) {
    702 		/*
    703 		 * This can happen if the caller did not pass a cached route
    704 		 * nor any other hints.  We treat this case an error.
    705 		 */
    706 		error = EHOSTUNREACH;
    707 	}
    708 	if (error == EHOSTUNREACH)
    709 		IP6_STATINC(IP6_STAT_NOROUTE);
    710 
    711 	if (retifp != NULL)
    712 		*retifp = ifp;
    713 	if (retrt != NULL)
    714 		*retrt = rt;	/* rt may be NULL */
    715 
    716 	return (error);
    717 }
    718 
    719 static int
    720 in6_selectif(struct sockaddr_in6 *dstsock, struct ip6_pktopts *opts,
    721 	struct ip6_moptions *mopts, struct route *ro, struct ifnet **retifp)
    722 {
    723 	int error, clone;
    724 	struct rtentry *rt = NULL;
    725 
    726 	clone = IN6_IS_ADDR_MULTICAST(&dstsock->sin6_addr) ? 0 : 1;
    727 	if ((error = selectroute(dstsock, opts, mopts, ro, retifp,
    728 	    &rt, clone, 1)) != 0) {
    729 		return (error);
    730 	}
    731 
    732 	/*
    733 	 * do not use a rejected or black hole route.
    734 	 * XXX: this check should be done in the L2 output routine.
    735 	 * However, if we skipped this check here, we'd see the following
    736 	 * scenario:
    737 	 * - install a rejected route for a scoped address prefix
    738 	 *   (like fe80::/10)
    739 	 * - send a packet to a destination that matches the scoped prefix,
    740 	 *   with ambiguity about the scope zone.
    741 	 * - pick the outgoing interface from the route, and disambiguate the
    742 	 *   scope zone with the interface.
    743 	 * - ip6_output() would try to get another route with the "new"
    744 	 *   destination, which may be valid.
    745 	 * - we'd see no error on output.
    746 	 * Although this may not be very harmful, it should still be confusing.
    747 	 * We thus reject the case here.
    748 	 */
    749 	if (rt && (rt->rt_flags & (RTF_REJECT | RTF_BLACKHOLE)))
    750 		return (rt->rt_flags & RTF_HOST ? EHOSTUNREACH : ENETUNREACH);
    751 
    752 	/*
    753 	 * Adjust the "outgoing" interface.  If we're going to loop the packet
    754 	 * back to ourselves, the ifp would be the loopback interface.
    755 	 * However, we'd rather know the interface associated to the
    756 	 * destination address (which should probably be one of our own
    757 	 * addresses.)
    758 	 */
    759 	if (rt && rt->rt_ifa && rt->rt_ifa->ifa_ifp)
    760 		*retifp = rt->rt_ifa->ifa_ifp;
    761 
    762 	return (0);
    763 }
    764 
    765 /*
    766  * close - meaningful only for bsdi and freebsd.
    767  */
    768 
    769 int
    770 in6_selectroute(struct sockaddr_in6 *dstsock, struct ip6_pktopts *opts,
    771 	struct ip6_moptions *mopts, struct route *ro, struct ifnet **retifp,
    772 	struct rtentry **retrt, int clone)
    773 {
    774 	return selectroute(dstsock, opts, mopts, ro, retifp,
    775 	    retrt, clone, 0);
    776 }
    777 
    778 /*
    779  * Default hop limit selection. The precedence is as follows:
    780  * 1. Hoplimit value specified via ioctl.
    781  * 2. (If the outgoing interface is detected) the current
    782  *     hop limit of the interface specified by router advertisement.
    783  * 3. The system default hoplimit.
    784 */
    785 int
    786 in6_selecthlim(struct in6pcb *in6p, struct ifnet *ifp)
    787 {
    788 	if (in6p && in6p->in6p_hops >= 0)
    789 		return (in6p->in6p_hops);
    790 	else if (ifp)
    791 		return (ND_IFINFO(ifp)->chlim);
    792 	else
    793 		return (ip6_defhlim);
    794 }
    795 
    796 /*
    797  * Find an empty port and set it to the specified PCB.
    798  */
    799 int
    800 in6_pcbsetport(struct sockaddr_in6 *sin6, struct in6pcb *in6p, struct lwp *l)
    801 {
    802 	struct socket *so = in6p->in6p_socket;
    803 	struct inpcbtable *table = in6p->in6p_table;
    804 	int cnt;
    805 	u_int16_t minport, maxport;
    806 	u_int16_t lport, *lastport;
    807 	int wild = 0;
    808 	void *t;
    809 	int error;
    810 	enum kauth_network_req req;
    811 
    812 	/* XXX: this is redundant when called from in6_pcbbind */
    813 	if ((so->so_options & (SO_REUSEADDR|SO_REUSEPORT)) == 0 &&
    814 	   ((so->so_proto->pr_flags & PR_CONNREQUIRED) == 0 ||
    815 	    (so->so_options & SO_ACCEPTCONN) == 0))
    816 		wild = 1;
    817 
    818 	if (in6p->in6p_flags & IN6P_LOWPORT) {
    819 #ifndef IPNOPRIVPORTS
    820 		req = KAUTH_REQ_NETWORK_BIND_PRIVPORT;
    821 #else
    822 		req = KAUTH_REQ_NETWORK_BIND_PORT;
    823 #endif
    824 
    825 		minport = ip6_lowportmin;
    826 		maxport = ip6_lowportmax;
    827 		lastport = &table->inpt_lastlow;
    828 	} else {
    829 		req = KAUTH_REQ_NETWORK_BIND_PORT;
    830 
    831 		minport = ip6_anonportmin;
    832 		maxport = ip6_anonportmax;
    833 		lastport = &table->inpt_lastport;
    834 	}
    835 
    836 	/* XXX-kauth: KAUTH_REQ_NETWORK_BIND_AUTOASSIGN_{,PRIV}PORT */
    837 	error = kauth_authorize_network(l->l_cred, KAUTH_NETWORK_BIND, req, so,
    838 	    sin6, NULL);
    839 	if (error)
    840 		return (EACCES);
    841 
    842 	if (minport > maxport) {	/* sanity check */
    843 		u_int16_t swp;
    844 
    845 		swp = minport;
    846 		minport = maxport;
    847 		maxport = swp;
    848 	}
    849 
    850 	lport = *lastport - 1;
    851 	for (cnt = maxport - minport + 1; cnt; cnt--, lport--) {
    852 		vestigial_inpcb_t vestige;
    853 
    854 		if (lport < minport || lport > maxport)
    855 			lport = maxport;
    856 #ifdef INET
    857 		if (IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr)) {
    858 			t = in_pcblookup_port(table,
    859 			    *(struct in_addr *)&sin6->sin6_addr.s6_addr32[3],
    860 			    htons(lport), wild, &vestige);
    861 			if (!t && vestige.valid)
    862 				continue;
    863 		} else
    864 #endif
    865 		{
    866 			t = in6_pcblookup_port(table, &sin6->sin6_addr,
    867 			    htons(lport), wild, &vestige);
    868 			if (!t && vestige.valid)
    869 				continue;
    870 		}
    871 		if (t == 0) {
    872 			/* We have a free port. Check with the secmodel. */
    873 			sin6->sin6_port = lport;
    874 			error = kauth_authorize_network(l->l_cred,
    875 			    KAUTH_NETWORK_BIND, req, so, sin6, NULL);
    876 			if (error) {
    877 				/* Secmodel says no. Keep looking. */
    878 				continue;
    879 			}
    880 
    881 			goto found;
    882 		}
    883 	}
    884 
    885 	return (EAGAIN);
    886 
    887 found:
    888 	in6p->in6p_flags |= IN6P_ANONPORT;
    889 	*lastport = lport;
    890 	in6p->in6p_lport = htons(lport);
    891 	in6_pcbstate(in6p, IN6P_BOUND);
    892 	return (0);		/* success */
    893 }
    894 
    895 void
    896 addrsel_policy_init(void)
    897 {
    898 	init_policy_queue();
    899 
    900 	/* initialize the "last resort" policy */
    901 	memset(&defaultaddrpolicy, 0, sizeof(defaultaddrpolicy));
    902 	defaultaddrpolicy.label = ADDR_LABEL_NOTAPP;
    903 }
    904 
    905 static struct in6_addrpolicy *
    906 lookup_addrsel_policy(struct sockaddr_in6 *key)
    907 {
    908 	struct in6_addrpolicy *match = NULL;
    909 
    910 	match = match_addrsel_policy(key);
    911 
    912 	if (match == NULL)
    913 		match = &defaultaddrpolicy;
    914 	else
    915 		match->use++;
    916 
    917 	return (match);
    918 }
    919 
    920 /*
    921  * Subroutines to manage the address selection policy table via sysctl.
    922  */
    923 struct sel_walkarg {
    924 	size_t	w_total;
    925 	size_t	w_given;
    926 	void *	w_where;
    927 	void *w_limit;
    928 };
    929 
    930 int
    931 in6_src_sysctl(void *oldp, size_t *oldlenp, void *newp, size_t newlen)
    932 {
    933 	int error = 0;
    934 	int s;
    935 
    936 	s = splsoftnet();
    937 
    938 	if (newp) {
    939 		error = EPERM;
    940 		goto end;
    941 	}
    942 	if (oldp && oldlenp == NULL) {
    943 		error = EINVAL;
    944 		goto end;
    945 	}
    946 	if (oldp || oldlenp) {
    947 		struct sel_walkarg w;
    948 		size_t oldlen = *oldlenp;
    949 
    950 		memset(&w, 0, sizeof(w));
    951 		w.w_given = oldlen;
    952 		w.w_where = oldp;
    953 		if (oldp)
    954 			w.w_limit = (char *)oldp + oldlen;
    955 
    956 		error = walk_addrsel_policy(dump_addrsel_policyent, &w);
    957 
    958 		*oldlenp = w.w_total;
    959 		if (oldp && w.w_total > oldlen && error == 0)
    960 			error = ENOMEM;
    961 	}
    962 
    963   end:
    964 	splx(s);
    965 
    966 	return (error);
    967 }
    968 
    969 int
    970 in6_src_ioctl(u_long cmd, void *data)
    971 {
    972 	int i;
    973 	struct in6_addrpolicy ent0;
    974 
    975 	if (cmd != SIOCAADDRCTL_POLICY && cmd != SIOCDADDRCTL_POLICY)
    976 		return (EOPNOTSUPP); /* check for safety */
    977 
    978 	ent0 = *(struct in6_addrpolicy *)data;
    979 
    980 	if (ent0.label == ADDR_LABEL_NOTAPP)
    981 		return (EINVAL);
    982 	/* check if the prefix mask is consecutive. */
    983 	if (in6_mask2len(&ent0.addrmask.sin6_addr, NULL) < 0)
    984 		return (EINVAL);
    985 	/* clear trailing garbages (if any) of the prefix address. */
    986 	for (i = 0; i < 4; i++) {
    987 		ent0.addr.sin6_addr.s6_addr32[i] &=
    988 			ent0.addrmask.sin6_addr.s6_addr32[i];
    989 	}
    990 	ent0.use = 0;
    991 
    992 	switch (cmd) {
    993 	case SIOCAADDRCTL_POLICY:
    994 		return (add_addrsel_policyent(&ent0));
    995 	case SIOCDADDRCTL_POLICY:
    996 		return (delete_addrsel_policyent(&ent0));
    997 	}
    998 
    999 	return (0);		/* XXX: compromise compilers */
   1000 }
   1001 
   1002 /*
   1003  * The followings are implementation of the policy table using a
   1004  * simple tail queue.
   1005  * XXX such details should be hidden.
   1006  * XXX implementation using binary tree should be more efficient.
   1007  */
   1008 struct addrsel_policyent {
   1009 	TAILQ_ENTRY(addrsel_policyent) ape_entry;
   1010 	struct in6_addrpolicy ape_policy;
   1011 };
   1012 
   1013 TAILQ_HEAD(addrsel_policyhead, addrsel_policyent);
   1014 
   1015 struct addrsel_policyhead addrsel_policytab;
   1016 
   1017 static void
   1018 init_policy_queue(void)
   1019 {
   1020 	TAILQ_INIT(&addrsel_policytab);
   1021 }
   1022 
   1023 static int
   1024 add_addrsel_policyent(struct in6_addrpolicy *newpolicy)
   1025 {
   1026 	struct addrsel_policyent *new, *pol;
   1027 
   1028 	/* duplication check */
   1029 	for (pol = TAILQ_FIRST(&addrsel_policytab); pol;
   1030 	     pol = TAILQ_NEXT(pol, ape_entry)) {
   1031 		if (IN6_ARE_ADDR_EQUAL(&newpolicy->addr.sin6_addr,
   1032 		    &pol->ape_policy.addr.sin6_addr) &&
   1033 		    IN6_ARE_ADDR_EQUAL(&newpolicy->addrmask.sin6_addr,
   1034 		    &pol->ape_policy.addrmask.sin6_addr)) {
   1035 			return (EEXIST);	/* or override it? */
   1036 		}
   1037 	}
   1038 
   1039 	new = malloc(sizeof(*new), M_IFADDR, M_WAITOK|M_ZERO);
   1040 
   1041 	/* XXX: should validate entry */
   1042 	new->ape_policy = *newpolicy;
   1043 
   1044 	TAILQ_INSERT_TAIL(&addrsel_policytab, new, ape_entry);
   1045 
   1046 	return (0);
   1047 }
   1048 
   1049 static int
   1050 delete_addrsel_policyent(struct in6_addrpolicy *key)
   1051 {
   1052 	struct addrsel_policyent *pol;
   1053 
   1054 	/* search for the entry in the table */
   1055 	for (pol = TAILQ_FIRST(&addrsel_policytab); pol;
   1056 	     pol = TAILQ_NEXT(pol, ape_entry)) {
   1057 		if (IN6_ARE_ADDR_EQUAL(&key->addr.sin6_addr,
   1058 		    &pol->ape_policy.addr.sin6_addr) &&
   1059 		    IN6_ARE_ADDR_EQUAL(&key->addrmask.sin6_addr,
   1060 		    &pol->ape_policy.addrmask.sin6_addr)) {
   1061 			break;
   1062 		}
   1063 	}
   1064 	if (pol == NULL) {
   1065 		return (ESRCH);
   1066 	}
   1067 
   1068 	TAILQ_REMOVE(&addrsel_policytab, pol, ape_entry);
   1069 
   1070 	return (0);
   1071 }
   1072 
   1073 static int
   1074 walk_addrsel_policy(int (*callback)(struct in6_addrpolicy *, void *), void *w)
   1075 {
   1076 	struct addrsel_policyent *pol;
   1077 	int error = 0;
   1078 
   1079 	TAILQ_FOREACH(pol, &addrsel_policytab, ape_entry) {
   1080 		if ((error = (*callback)(&pol->ape_policy, w)) != 0)
   1081 			return error;
   1082 	}
   1083 
   1084 	return error;
   1085 }
   1086 
   1087 static int
   1088 dump_addrsel_policyent(struct in6_addrpolicy *pol, void *arg)
   1089 {
   1090 	int error = 0;
   1091 	struct sel_walkarg *w = arg;
   1092 
   1093 	if (w->w_where && (char *)w->w_where + sizeof(*pol) <= (char *)w->w_limit) {
   1094 		if ((error = copyout(pol, w->w_where, sizeof(*pol))) != 0)
   1095 			return error;
   1096 		w->w_where = (char *)w->w_where + sizeof(*pol);
   1097 	}
   1098 	w->w_total += sizeof(*pol);
   1099 
   1100 	return error;
   1101 }
   1102 
   1103 static struct in6_addrpolicy *
   1104 match_addrsel_policy(struct sockaddr_in6 *key)
   1105 {
   1106 	struct addrsel_policyent *pent;
   1107 	struct in6_addrpolicy *bestpol = NULL, *pol;
   1108 	int matchlen, bestmatchlen = -1;
   1109 	u_char *mp, *ep, *k, *p, m;
   1110 
   1111 	for (pent = TAILQ_FIRST(&addrsel_policytab); pent;
   1112 	     pent = TAILQ_NEXT(pent, ape_entry)) {
   1113 		matchlen = 0;
   1114 
   1115 		pol = &pent->ape_policy;
   1116 		mp = (u_char *)&pol->addrmask.sin6_addr;
   1117 		ep = mp + 16;	/* XXX: scope field? */
   1118 		k = (u_char *)&key->sin6_addr;
   1119 		p = (u_char *)&pol->addr.sin6_addr;
   1120 		for (; mp < ep && *mp; mp++, k++, p++) {
   1121 			m = *mp;
   1122 			if ((*k & m) != *p)
   1123 				goto next; /* not match */
   1124 			if (m == 0xff) /* short cut for a typical case */
   1125 				matchlen += 8;
   1126 			else {
   1127 				while (m >= 0x80) {
   1128 					matchlen++;
   1129 					m <<= 1;
   1130 				}
   1131 			}
   1132 		}
   1133 
   1134 		/* matched.  check if this is better than the current best. */
   1135 		if (bestpol == NULL ||
   1136 		    matchlen > bestmatchlen) {
   1137 			bestpol = pol;
   1138 			bestmatchlen = matchlen;
   1139 		}
   1140 
   1141 	  next:
   1142 		continue;
   1143 	}
   1144 
   1145 	return (bestpol);
   1146 }
   1147