udp6_usrreq.c revision 1.94 1 /* $NetBSD: udp6_usrreq.c,v 1.94 2014/05/18 14:46:16 rmind Exp $ */
2 /* $KAME: udp6_usrreq.c,v 1.86 2001/05/27 17:33:00 itojun Exp $ */
3
4 /*
5 * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
6 * All rights reserved.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
10 * are met:
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. Neither the name of the project nor the names of its contributors
17 * may be used to endorse or promote products derived from this software
18 * without specific prior written permission.
19 *
20 * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
24 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
25 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
26 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
27 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
28 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
29 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30 * SUCH DAMAGE.
31 */
32
33 /*
34 * Copyright (c) 1982, 1986, 1989, 1993
35 * The Regents of the University of California. All rights reserved.
36 *
37 * Redistribution and use in source and binary forms, with or without
38 * modification, are permitted provided that the following conditions
39 * are met:
40 * 1. Redistributions of source code must retain the above copyright
41 * notice, this list of conditions and the following disclaimer.
42 * 2. Redistributions in binary form must reproduce the above copyright
43 * notice, this list of conditions and the following disclaimer in the
44 * documentation and/or other materials provided with the distribution.
45 * 3. Neither the name of the University nor the names of its contributors
46 * may be used to endorse or promote products derived from this software
47 * without specific prior written permission.
48 *
49 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
50 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
51 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
52 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
53 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
54 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
55 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
56 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
57 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
58 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
59 * SUCH DAMAGE.
60 *
61 * @(#)udp_var.h 8.1 (Berkeley) 6/10/93
62 */
63
64 #include <sys/cdefs.h>
65 __KERNEL_RCSID(0, "$NetBSD: udp6_usrreq.c,v 1.94 2014/05/18 14:46:16 rmind Exp $");
66
67 #include "opt_inet.h"
68
69 #include <sys/param.h>
70 #include <sys/malloc.h>
71 #include <sys/mbuf.h>
72 #include <sys/protosw.h>
73 #include <sys/socket.h>
74 #include <sys/socketvar.h>
75 #include <sys/errno.h>
76 #include <sys/stat.h>
77 #include <sys/systm.h>
78 #include <sys/proc.h>
79 #include <sys/syslog.h>
80 #include <sys/domain.h>
81 #include <sys/sysctl.h>
82
83 #include <net/if.h>
84 #include <net/route.h>
85 #include <net/if_types.h>
86
87 #include <netinet/in.h>
88 #include <netinet/in_var.h>
89 #include <netinet/in_systm.h>
90 #include <netinet/ip.h>
91 #include <netinet/ip_var.h>
92 #include <netinet/in_pcb.h>
93 #include <netinet/udp.h>
94 #include <netinet/udp_var.h>
95 #include <netinet/ip6.h>
96 #include <netinet6/ip6_var.h>
97 #include <netinet6/in6_pcb.h>
98 #include <netinet/icmp6.h>
99 #include <netinet6/udp6_var.h>
100 #include <netinet6/udp6_private.h>
101 #include <netinet6/ip6protosw.h>
102 #include <netinet/in_offload.h>
103
104 #include "faith.h"
105 #if defined(NFAITH) && NFAITH > 0
106 #include <net/if_faith.h>
107 #endif
108
109 /*
110 * UDP protocol implementation.
111 * Per RFC 768, August, 1980.
112 */
113
114 extern struct inpcbtable udbtable;
115
116 percpu_t *udp6stat_percpu;
117
118 static void udp6_notify(struct in6pcb *, int);
119 static void sysctl_net_inet6_udp6_setup(struct sysctllog **);
120
121 void
122 udp6_init(void)
123 {
124
125 sysctl_net_inet6_udp6_setup(NULL);
126 udp6stat_percpu = percpu_alloc(sizeof(uint64_t) * UDP6_NSTATS);
127
128 udp_init_common();
129 }
130
131 /*
132 * Notify a udp user of an asynchronous error;
133 * just wake up so that he can collect error status.
134 */
135 static void
136 udp6_notify(struct in6pcb *in6p, int errno)
137 {
138 in6p->in6p_socket->so_error = errno;
139 sorwakeup(in6p->in6p_socket);
140 sowwakeup(in6p->in6p_socket);
141 }
142
143 void *
144 udp6_ctlinput(int cmd, const struct sockaddr *sa, void *d)
145 {
146 struct udphdr uh;
147 struct ip6_hdr *ip6;
148 const struct sockaddr_in6 *sa6 = (const struct sockaddr_in6 *)sa;
149 struct mbuf *m;
150 int off;
151 void *cmdarg;
152 struct ip6ctlparam *ip6cp = NULL;
153 const struct sockaddr_in6 *sa6_src = NULL;
154 void (*notify)(struct in6pcb *, int) = udp6_notify;
155 struct udp_portonly {
156 u_int16_t uh_sport;
157 u_int16_t uh_dport;
158 } *uhp;
159
160 if (sa->sa_family != AF_INET6 ||
161 sa->sa_len != sizeof(struct sockaddr_in6))
162 return NULL;
163
164 if ((unsigned)cmd >= PRC_NCMDS)
165 return NULL;
166 if (PRC_IS_REDIRECT(cmd))
167 notify = in6_rtchange, d = NULL;
168 else if (cmd == PRC_HOSTDEAD)
169 d = NULL;
170 else if (cmd == PRC_MSGSIZE) {
171 /* special code is present, see below */
172 notify = in6_rtchange;
173 }
174 else if (inet6ctlerrmap[cmd] == 0)
175 return NULL;
176
177 /* if the parameter is from icmp6, decode it. */
178 if (d != NULL) {
179 ip6cp = (struct ip6ctlparam *)d;
180 m = ip6cp->ip6c_m;
181 ip6 = ip6cp->ip6c_ip6;
182 off = ip6cp->ip6c_off;
183 cmdarg = ip6cp->ip6c_cmdarg;
184 sa6_src = ip6cp->ip6c_src;
185 } else {
186 m = NULL;
187 ip6 = NULL;
188 cmdarg = NULL;
189 sa6_src = &sa6_any;
190 off = 0;
191 }
192
193 if (ip6) {
194 /*
195 * XXX: We assume that when IPV6 is non NULL,
196 * M and OFF are valid.
197 */
198
199 /* check if we can safely examine src and dst ports */
200 if (m->m_pkthdr.len < off + sizeof(*uhp)) {
201 if (cmd == PRC_MSGSIZE)
202 icmp6_mtudisc_update((struct ip6ctlparam *)d, 0);
203 return NULL;
204 }
205
206 memset(&uh, 0, sizeof(uh));
207 m_copydata(m, off, sizeof(*uhp), (void *)&uh);
208
209 if (cmd == PRC_MSGSIZE) {
210 int valid = 0;
211
212 /*
213 * Check to see if we have a valid UDP socket
214 * corresponding to the address in the ICMPv6 message
215 * payload.
216 */
217 if (in6_pcblookup_connect(&udbtable, &sa6->sin6_addr,
218 uh.uh_dport, (const struct in6_addr *)&sa6_src->sin6_addr,
219 uh.uh_sport, 0, 0))
220 valid++;
221 #if 0
222 /*
223 * As the use of sendto(2) is fairly popular,
224 * we may want to allow non-connected pcb too.
225 * But it could be too weak against attacks...
226 * We should at least check if the local address (= s)
227 * is really ours.
228 */
229 else if (in6_pcblookup_bind(&udbtable, &sa6->sin6_addr,
230 uh.uh_dport, 0))
231 valid++;
232 #endif
233
234 /*
235 * Depending on the value of "valid" and routing table
236 * size (mtudisc_{hi,lo}wat), we will:
237 * - recalculate the new MTU and create the
238 * corresponding routing entry, or
239 * - ignore the MTU change notification.
240 */
241 icmp6_mtudisc_update((struct ip6ctlparam *)d, valid);
242
243 /*
244 * regardless of if we called
245 * icmp6_mtudisc_update(), we need to call
246 * in6_pcbnotify(), to notify path MTU change
247 * to the userland (RFC3542), because some
248 * unconnected sockets may share the same
249 * destination and want to know the path MTU.
250 */
251 }
252
253 (void) in6_pcbnotify(&udbtable, sa, uh.uh_dport,
254 (const struct sockaddr *)sa6_src, uh.uh_sport, cmd, cmdarg,
255 notify);
256 } else {
257 (void) in6_pcbnotify(&udbtable, sa, 0,
258 (const struct sockaddr *)sa6_src, 0, cmd, cmdarg, notify);
259 }
260 return NULL;
261 }
262
263 int
264 udp6_ctloutput(int op, struct socket *so, struct sockopt *sopt)
265 {
266 int s;
267 int error = 0;
268 int family;
269
270 family = so->so_proto->pr_domain->dom_family;
271
272 s = splsoftnet();
273 switch (family) {
274 #ifdef INET
275 case PF_INET:
276 if (sopt->sopt_level != IPPROTO_UDP) {
277 error = ip_ctloutput(op, so, sopt);
278 goto end;
279 }
280 break;
281 #endif
282 #ifdef INET6
283 case PF_INET6:
284 if (sopt->sopt_level != IPPROTO_UDP) {
285 error = ip6_ctloutput(op, so, sopt);
286 goto end;
287 }
288 break;
289 #endif
290 default:
291 error = EAFNOSUPPORT;
292 goto end;
293 }
294 error = EINVAL;
295
296 end:
297 splx(s);
298 return error;
299 }
300
301
302 extern int udp6_sendspace;
303 extern int udp6_recvspace;
304
305 int
306 udp6_usrreq(struct socket *so, int req, struct mbuf *m, struct mbuf *addr6,
307 struct mbuf *control, struct lwp *l)
308 {
309 struct in6pcb *in6p = sotoin6pcb(so);
310 int error = 0;
311 int s;
312
313 /*
314 * MAPPED_ADDR implementation info:
315 * Mapped addr support for PRU_CONTROL is not necessary.
316 * Because typical user of PRU_CONTROL is such as ifconfig,
317 * and they don't associate any addr to their socket. Then
318 * socket family is only hint about the PRU_CONTROL'ed address
319 * family, especially when getting addrs from kernel.
320 * So AF_INET socket need to be used to control AF_INET addrs,
321 * and AF_INET6 socket for AF_INET6 addrs.
322 */
323 if (req == PRU_CONTROL)
324 return in6_control(so, (u_long)m, (void *)addr6,
325 (struct ifnet *)control, l);
326
327 if (req == PRU_PURGEIF) {
328 mutex_enter(softnet_lock);
329 in6_pcbpurgeif0(&udbtable, (struct ifnet *)control);
330 in6_purgeif((struct ifnet *)control);
331 in6_pcbpurgeif(&udbtable, (struct ifnet *)control);
332 mutex_exit(softnet_lock);
333 return 0;
334 }
335
336 if (req == PRU_ATTACH)
337 sosetlock(so);
338 else if (in6p == NULL) {
339 error = EINVAL;
340 goto release;
341 }
342
343 switch (req) {
344 case PRU_ATTACH:
345 /*
346 * MAPPED_ADDR implementation spec:
347 * Always attach for IPv6,
348 * and only when necessary for IPv4.
349 */
350 if (in6p != NULL) {
351 error = EINVAL;
352 break;
353 }
354 s = splsoftnet();
355 error = in6_pcballoc(so, &udbtable);
356 splx(s);
357 if (error)
358 break;
359 error = soreserve(so, udp6_sendspace, udp6_recvspace);
360 if (error)
361 break;
362 in6p = sotoin6pcb(so);
363 in6p->in6p_cksum = -1; /* just to be sure */
364 break;
365
366 case PRU_DETACH:
367 in6_pcbdetach(in6p);
368 break;
369
370 case PRU_BIND:
371 s = splsoftnet();
372 error = in6_pcbbind(in6p, addr6, l);
373 splx(s);
374 break;
375
376 case PRU_CONNECT:
377 if (!IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
378 error = EISCONN;
379 break;
380 }
381 s = splsoftnet();
382 error = in6_pcbconnect(in6p, addr6, l);
383 splx(s);
384 if (error == 0)
385 soisconnected(so);
386 break;
387
388 case PRU_DISCONNECT:
389 if (IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
390 error = ENOTCONN;
391 break;
392 }
393 s = splsoftnet();
394 in6_pcbdisconnect(in6p);
395 memset((void *)&in6p->in6p_laddr, 0, sizeof(in6p->in6p_laddr));
396 splx(s);
397 so->so_state &= ~SS_ISCONNECTED; /* XXX */
398 in6_pcbstate(in6p, IN6P_BOUND); /* XXX */
399 break;
400
401 case PRU_SHUTDOWN:
402 socantsendmore(so);
403 break;
404
405 case PRU_SEND:
406 s = splsoftnet();
407 error = udp6_output(in6p, m, addr6, control, l);
408 splx(s);
409 return error;
410
411 case PRU_ABORT:
412 soisdisconnected(so);
413 in6_pcbdetach(in6p);
414 break;
415
416 case PRU_SOCKADDR:
417 in6_setsockaddr(in6p, addr6);
418 break;
419
420 case PRU_PEERADDR:
421 in6_setpeeraddr(in6p, addr6);
422 break;
423
424 case PRU_SENSE:
425 /*
426 * stat: don't bother with a blocksize
427 */
428 return 0;
429
430 case PRU_LISTEN:
431 case PRU_CONNECT2:
432 case PRU_ACCEPT:
433 case PRU_SENDOOB:
434 case PRU_FASTTIMO:
435 case PRU_SLOWTIMO:
436 case PRU_PROTORCV:
437 case PRU_PROTOSEND:
438 error = EOPNOTSUPP;
439 break;
440
441 case PRU_RCVD:
442 case PRU_RCVOOB:
443 return EOPNOTSUPP; /* do not free mbuf's */
444
445 default:
446 panic("udp6_usrreq");
447 }
448
449 release:
450 if (control != NULL)
451 m_freem(control);
452 if (m != NULL)
453 m_freem(m);
454 return error;
455 }
456
457 static int
458 sysctl_net_inet6_udp6_stats(SYSCTLFN_ARGS)
459 {
460
461 return (NETSTAT_SYSCTL(udp6stat_percpu, UDP6_NSTATS));
462 }
463
464 static void
465 sysctl_net_inet6_udp6_setup(struct sysctllog **clog)
466 {
467
468 sysctl_createv(clog, 0, NULL, NULL,
469 CTLFLAG_PERMANENT,
470 CTLTYPE_NODE, "inet6", NULL,
471 NULL, 0, NULL, 0,
472 CTL_NET, PF_INET6, CTL_EOL);
473 sysctl_createv(clog, 0, NULL, NULL,
474 CTLFLAG_PERMANENT,
475 CTLTYPE_NODE, "udp6",
476 SYSCTL_DESCR("UDPv6 related settings"),
477 NULL, 0, NULL, 0,
478 CTL_NET, PF_INET6, IPPROTO_UDP, CTL_EOL);
479
480 sysctl_createv(clog, 0, NULL, NULL,
481 CTLFLAG_PERMANENT|CTLFLAG_READWRITE,
482 CTLTYPE_INT, "sendspace",
483 SYSCTL_DESCR("Default UDP send buffer size"),
484 NULL, 0, &udp6_sendspace, 0,
485 CTL_NET, PF_INET6, IPPROTO_UDP, UDP6CTL_SENDSPACE,
486 CTL_EOL);
487 sysctl_createv(clog, 0, NULL, NULL,
488 CTLFLAG_PERMANENT|CTLFLAG_READWRITE,
489 CTLTYPE_INT, "recvspace",
490 SYSCTL_DESCR("Default UDP receive buffer size"),
491 NULL, 0, &udp6_recvspace, 0,
492 CTL_NET, PF_INET6, IPPROTO_UDP, UDP6CTL_RECVSPACE,
493 CTL_EOL);
494 sysctl_createv(clog, 0, NULL, NULL,
495 CTLFLAG_PERMANENT|CTLFLAG_READWRITE,
496 CTLTYPE_INT, "do_loopback_cksum",
497 SYSCTL_DESCR("Perform UDP checksum on loopback"),
498 NULL, 0, &udp_do_loopback_cksum, 0,
499 CTL_NET, PF_INET6, IPPROTO_UDP, UDP6CTL_LOOPBACKCKSUM,
500 CTL_EOL);
501 sysctl_createv(clog, 0, NULL, NULL,
502 CTLFLAG_PERMANENT,
503 CTLTYPE_STRUCT, "pcblist",
504 SYSCTL_DESCR("UDP protocol control block list"),
505 sysctl_inpcblist, 0, &udbtable, 0,
506 CTL_NET, PF_INET6, IPPROTO_UDP, CTL_CREATE,
507 CTL_EOL);
508 sysctl_createv(clog, 0, NULL, NULL,
509 CTLFLAG_PERMANENT,
510 CTLTYPE_STRUCT, "stats",
511 SYSCTL_DESCR("UDPv6 statistics"),
512 sysctl_net_inet6_udp6_stats, 0, NULL, 0,
513 CTL_NET, PF_INET6, IPPROTO_UDP, UDP6CTL_STATS,
514 CTL_EOL);
515 }
516
517 void
518 udp6_statinc(u_int stat)
519 {
520
521 KASSERT(stat < UDP6_NSTATS);
522 UDP6_STATINC(stat);
523 }
524
525 PR_WRAP_USRREQ(udp6_usrreq)
526
527 #define udp6_usrreq udp6_usrreq_wrapper
528
529 const struct pr_usrreqs udp6_usrreqs = {
530 .pr_generic = udp6_usrreq,
531 };
532