Makefile.rumpkern revision 1.110.2.5
1 # $NetBSD: Makefile.rumpkern,v 1.110.2.5 2013/01/16 05:33:51 yamt Exp $ 2 # 3 4 .include "${RUMPTOP}/Makefile.rump" 5 6 .include <bsd.own.mk> 7 8 LIB= rump 9 10 .PATH: ${RUMPTOP}/librump/rumpkern \ 11 ${RUMPTOP}/../kern \ 12 ${RUMPTOP}/../uvm \ 13 ${RUMPTOP}/../conf \ 14 ${RUMPTOP}/../dev \ 15 ${RUMPTOP}/../secmodel \ 16 ${RUMPTOP}/../secmodel/suser \ 17 ${RUMPTOP}/../compat/common 18 19 # 20 # Source modules, first the ones specifically implemented for librump. 21 # 22 SRCS= rump.c rumpcopy.c emul.c intr.c lwproc.c klock.c \ 23 kobj_rename.c ltsleep.c memalloc.c scheduler.c \ 24 signals.c sleepq.c threads.c vm.c cprng_stub.c 25 26 # Multiprocessor or uniprocessor locking. TODO: select right 27 # locking at runtime. 28 SRCS+= locks.c 29 #SRCS+= locks_up.c 30 31 MKREPRO?=no 32 33 .if ${MKREPRO} == "yes" 34 _NVFLAGS=-r 35 .else 36 _NVFLAGS= 37 .endif 38 39 vers.c: ${RUMPTOP}/../conf/newvers.sh ${RUMPTOP}/../conf/osrelease.sh \ 40 ${RUMPTOP}/../sys/param.h ${_NETBSD_VERSION_DEPENDS} 41 ${_MKMSG_CREATE} vers.c 42 ${HOST_SH} ${RUMPTOP}/../conf/newvers.sh -i RUMP-ROAST -n ${_NVFLAGS} 43 SRCS+= vers.c 44 CLEANFILES+= vers.c version 45 46 # use MI pmap for archs not conforming to kernel ABI 47 .ifndef RUMPKMOD 48 SRCS+= pmap_stub.c 49 .endif 50 51 # autogenerated 52 # 53 SRCS+= rump_syscalls.c rumpkern_if_wrappers.c 54 55 # "auto"generated 56 SRCS+= devsw.c 57 58 # 59 # std kernel sources 60 # 61 # sys/kern 62 SRCS+= init_sysctl_base.c \ 63 kern_auth.c \ 64 kern_cfglock.c \ 65 kern_descrip.c \ 66 kern_event.c \ 67 kern_hook.c \ 68 kern_ksyms.c \ 69 kern_module.c \ 70 kern_mutex_obj.c \ 71 kern_ntptime.c \ 72 kern_proc.c \ 73 kern_prot.c \ 74 kern_rate.c \ 75 kern_resource.c \ 76 kern_rndpool.c \ 77 kern_rndq.c \ 78 kern_stub.c \ 79 kern_syscall.c \ 80 kern_sysctl.c \ 81 kern_tc.c \ 82 kern_timeout.c \ 83 kern_uidinfo.c \ 84 kern_xxx.c \ 85 param.c \ 86 subr_devsw.c \ 87 subr_callback.c \ 88 subr_copy.c \ 89 subr_device.c \ 90 subr_evcnt.c \ 91 subr_extent.c \ 92 subr_hash.c \ 93 subr_humanize.c \ 94 subr_iostat.c \ 95 subr_kcpuset.c \ 96 subr_kobj.c \ 97 subr_log.c \ 98 subr_lwp_specificdata.c \ 99 subr_once.c \ 100 subr_prf.c \ 101 subr_pserialize.c \ 102 subr_specificdata.c \ 103 subr_time.c \ 104 subr_workqueue.c \ 105 subr_xcall.c \ 106 sys_descrip.c \ 107 sys_generic.c \ 108 sys_module.c \ 109 sys_pipe.c \ 110 sys_select.c \ 111 syscalls.c \ 112 uipc_sem.c 113 114 # sys/uvm 115 SRCS+= uvm_aobj.c uvm_readahead.c uvm_object.c 116 SRCS+= uvm_page_array.c uvm_page_status.c 117 118 # 4.4BSD secmodel. selection is hardcoded for now 119 SRCS+= secmodel.c 120 SRCS+= secmodel_suser.c 121 122 # the funny bit. this doesn't really belong here, but helps with the 123 # needs of kern_descrip.c. And since it's a fully dynamic interface, 124 # it doesn't pull in other gunk. 125 SRCS+= vnode_if.c 126 127 # sys/dev 128 SRCS+= clock_subr.c 129 130 # compat 131 SRCS+= kern_select_50.c 132 133 # Set RUMP_UNREAL_ALLOCATORS to "yes" to use memory allocation hypercalls 134 # directly instead of the kmem/pool allocators backed by hypercalls. 135 # Direct hypercalls may be a few percent faster, but don't emulate 136 # all kernel corner cases as well (not to mention if you want to debug the 137 # allocators themselves). 138 .if defined(RUMP_UNREAL_ALLOCATORS) && ${RUMP_UNREAL_ALLOCATORS} == "yes" 139 CPPFLAGS+= -DRUMP_UNREAL_ALLOCATORS 140 .else 141 SRCS+= subr_kmem.c subr_percpu.c subr_pool.c subr_vmem.c 142 .endif 143 144 .ifdef RUMP_LOCKDEBUG 145 SRCS+= subr_lockdebug.c 146 .endif 147 148 # no shlib_version because this is automatically in sync with lib/librump 149 SHLIB_MAJOR= 0 150 SHLIB_MINOR= 0 151 152 CPPFLAGS+= -I${RUMPTOP}/librump/rumpkern -I${RUMPTOP}/librump/rumpvfs 153 CPPFLAGS+= -I${RUMPTOP}/librump/rumpnet -I${RUMPTOP}/librump/rumpdev 154 AFLAGS+= -D_LOCORE -Wa,--fatal-warnings 155 156 # 157 # If archdir exists, it is required to provide: 158 # 1) kobj_reloc() and kobj_machdep() 159 # 2) rump_cpu_bootstrap() 160 # 3) ...? 161 # 4) PROFIT! 162 # 163 164 # 165 # Check if we are building compat. In compat mode we need to provide 166 # the kernel of our compat target (amd64->i386 & sparc64->sparc), so 167 # take MD stuff from the right arch. 168 # 169 .ifdef MLIBDIR 170 ARCHDIR= ${RUMPTOP}/librump/rumpkern/arch/${MLIBDIR} 171 LIBKERN_ARCH= ${MLIBDIR} 172 .elif exists(${RUMPTOP}/librump/rumpkern/arch/${MACHINE_CPU}) 173 ARCHDIR= ${RUMPTOP}/librump/rumpkern/arch/${MACHINE_CPU} 174 .else 175 ARCHDIR= ${RUMPTOP}/librump/rumpkern/arch/${MACHINE_ARCH} 176 .endif 177 .if exists(${ARCHDIR}) 178 .include "${ARCHDIR}/Makefile.inc" 179 .PATH: ${ARCHDIR} 180 .else 181 SRCS+= kobj_stubs.c rumpcpu_generic.c 182 .endif 183 184 .if ${MACHINE} == "sun3" 185 CPPFLAGS+= -Dsun3 186 .endif 187 188 # include libkern source files 189 KERNDIR=${RUMPTOP}/../lib/libkern 190 .ifdef RUMPKMOD 191 KERNMISCCPPFLAGS+= -D_RUMPKERNEL 192 .endif 193 .include "${RUMPTOP}/../lib/libkern/Makefile.libkern" 194 195 # Some architectures require a little special massage with atomic 196 # compare-and-swap. This is because the kernel version is using 197 # instructions or routines unavailable to us in userspace. 198 # 199 .if ${MACHINE_CPU} == "arm" || ${MACHINE_CPU} == "hppa" \ 200 || ${MACHINE_CPU} == "mips" || ${MACHINE_CPU} == "sh3" \ 201 || ${MACHINE_CPU} == "vax" || ${MACHINE_ARCH} == "m68000" 202 CPPFLAGS+= -I${RUMPTOP}/../../common/lib/libc/atomic 203 SRCS+= atomic_cas_generic.c 204 #SRCS+= rump_atomic_cas_up.c 205 .endif 206 207 .include <bsd.lib.mk> 208 .include <bsd.klinks.mk> 209
Indexes created Wed Oct 22 13:09:56 GMT 2025