Makefile.rumpkern revision 1.127
1 # $NetBSD: Makefile.rumpkern,v 1.127 2013/05/01 17:52:34 pooka Exp $ 2 # 3 4 .include "${RUMPTOP}/Makefile.rump" 5 6 .include <bsd.own.mk> 7 8 LIB= rump 9 10 .PATH: ${RUMPTOP}/librump/rumpkern \ 11 ${RUMPTOP}/../kern \ 12 ${RUMPTOP}/../uvm \ 13 ${RUMPTOP}/../conf \ 14 ${RUMPTOP}/../dev \ 15 ${RUMPTOP}/../secmodel \ 16 ${RUMPTOP}/../secmodel/suser \ 17 ${RUMPTOP}/../compat/common 18 19 # 20 # Source modules, first the ones specifically implemented for librump. 21 # 22 SRCS+= rump.c rumpcopy.c emul.c intr.c lwproc.c klock.c \ 23 kobj_rename.c ltsleep.c scheduler.c \ 24 signals.c sleepq.c threads.c vm.c cprng_stub.c 25 26 # optional hypervisor interfaces 27 #SRCS+= hyperstubs.c 28 29 # Multiprocessor or uniprocessor locking. TODO: select right 30 # locking at runtime. 31 SRCS+= locks.c 32 #SRCS+= locks_up.c 33 34 MKREPRO?=no 35 36 .if ${MKREPRO} == "yes" 37 _NVFLAGS=-r 38 .else 39 _NVFLAGS= 40 .endif 41 42 vers.c: ${RUMPTOP}/../conf/newvers.sh ${RUMPTOP}/../conf/osrelease.sh \ 43 ${RUMPTOP}/../sys/param.h ${_NETBSD_VERSION_DEPENDS} 44 ${_MKMSG_CREATE} vers.c 45 ${HOST_SH} ${RUMPTOP}/../conf/newvers.sh -i RUMP-ROAST -n ${_NVFLAGS} 46 SRCS+= vers.c 47 CLEANFILES+= vers.c version 48 49 # use MI pmap for archs not conforming to kernel ABI 50 .ifndef RUMPKMOD 51 SRCS+= pmap_stub.c 52 .endif 53 54 # autogenerated 55 # 56 SRCS+= rump_syscalls.c rumpkern_if_wrappers.c 57 58 # "auto"generated 59 SRCS+= devsw.c 60 61 # 62 # std kernel sources 63 # 64 # sys/kern 65 SRCS+= init_sysctl_base.c \ 66 kern_auth.c \ 67 kern_cfglock.c \ 68 kern_descrip.c \ 69 kern_event.c \ 70 kern_hook.c \ 71 kern_ksyms.c \ 72 kern_malloc.c \ 73 kern_module.c \ 74 kern_mutex_obj.c \ 75 kern_ntptime.c \ 76 kern_proc.c \ 77 kern_prot.c \ 78 kern_rate.c \ 79 kern_resource.c \ 80 kern_rndpool.c \ 81 kern_rndq.c \ 82 kern_stub.c \ 83 kern_syscall.c \ 84 kern_sysctl.c \ 85 kern_tc.c \ 86 kern_timeout.c \ 87 kern_uidinfo.c \ 88 kern_xxx.c \ 89 param.c \ 90 subr_devsw.c \ 91 subr_callback.c \ 92 subr_copy.c \ 93 subr_device.c \ 94 subr_evcnt.c \ 95 subr_extent.c \ 96 subr_hash.c \ 97 subr_humanize.c \ 98 subr_iostat.c \ 99 subr_kcpuset.c \ 100 subr_kobj.c \ 101 subr_log.c \ 102 subr_lwp_specificdata.c \ 103 subr_once.c \ 104 subr_percpu.c \ 105 subr_prf.c \ 106 subr_pserialize.c \ 107 subr_specificdata.c \ 108 subr_time.c \ 109 subr_vmem.c \ 110 subr_workqueue.c \ 111 subr_xcall.c \ 112 sys_descrip.c \ 113 sys_generic.c \ 114 sys_module.c \ 115 sys_pipe.c \ 116 sys_select.c \ 117 syscalls.c \ 118 uipc_sem.c 119 120 # sys/uvm 121 SRCS+= uvm_aobj.c uvm_readahead.c uvm_object.c 122 123 # 4.4BSD secmodel. selection is hardcoded for now 124 SRCS+= secmodel.c 125 SRCS+= secmodel_suser.c 126 127 # the funny bit. this doesn't really belong here, but helps with the 128 # needs of kern_descrip.c. And since it's a fully dynamic interface, 129 # it doesn't pull in other gunk. 130 SRCS+= vnode_if.c 131 132 # sys/dev 133 SRCS+= clock_subr.c 134 135 # compat 136 SRCS+= kern_select_50.c 137 138 # Set RUMP_UNREAL_ALLOCATORS to "yes" to use memory allocation hypercalls 139 # directly instead of the kmem/pool allocators backed by hypercalls. 140 # Direct hypercalls may be a few percent faster, but don't emulate 141 # all kernel corner cases as well (not to mention if you want to debug the 142 # allocators themselves). 143 .if defined(RUMP_UNREAL_ALLOCATORS) && ${RUMP_UNREAL_ALLOCATORS} == "yes" 144 SRCS+= memalloc.c 145 .else 146 SRCS+= subr_kmem.c subr_pool.c 147 .endif 148 149 .ifdef RUMP_LOCKDEBUG 150 SRCS+= subr_lockdebug.c 151 .endif 152 153 # no shlib_version because this is automatically in sync with lib/librump 154 SHLIB_MAJOR= 0 155 SHLIB_MINOR= 0 156 157 CPPFLAGS+= -I${RUMPTOP}/librump/rumpkern -I${RUMPTOP}/librump/rumpvfs 158 CPPFLAGS+= -I${RUMPTOP}/librump/rumpnet -I${RUMPTOP}/librump/rumpdev 159 AFLAGS+= -D_LOCORE -Wa,--fatal-warnings 160 161 # 162 # If archdir exists, it is required to provide: 163 # 1) kobj_reloc() and kobj_machdep() 164 # 2) rump_cpu_bootstrap() 165 # 3) ...? 166 # 4) PROFIT! 167 # 168 169 # 170 # Check if we are building compat. In compat mode we need to provide 171 # the kernel of our compat target (amd64->i386 & sparc64->sparc), so 172 # take MD stuff from the right arch. 173 # 174 .ifdef MLIBDIR 175 ARCHDIR= ${RUMPTOP}/librump/rumpkern/arch/${MLIBDIR} 176 LIBKERN_ARCH= ${MLIBDIR} 177 .elif exists(${RUMPTOP}/librump/rumpkern/arch/${MACHINE_CPU}) 178 ARCHDIR= ${RUMPTOP}/librump/rumpkern/arch/${MACHINE_CPU} 179 .else 180 ARCHDIR= ${RUMPTOP}/librump/rumpkern/arch/${MACHINE_ARCH} 181 .endif 182 .if exists(${ARCHDIR}) 183 .include "${ARCHDIR}/Makefile.inc" 184 .PATH: ${ARCHDIR} 185 .else 186 SRCS+= kobj_stubs.c rumpcpu_generic.c 187 .endif 188 189 .if ${MACHINE} == "sun3" 190 CPPFLAGS+= -Dsun3 191 .endif 192 193 # include libkern source files 194 KERNDIR=${RUMPTOP}/../lib/libkern 195 .ifdef RUMPKMOD 196 KERNMISCCPPFLAGS+= -D_RUMPKERNEL 197 .endif 198 .include "${RUMPTOP}/../lib/libkern/Makefile.libkern" 199 200 # Some architectures require a little special massage with atomic 201 # compare-and-swap. This is because the kernel version is using 202 # instructions or routines unavailable to us in userspace. 203 # 204 .if (${MACHINE_CPU} == "arm" && empty(ARMV6)) || ${MACHINE_CPU} == "hppa" \ 205 || ${MACHINE_CPU} == "mips" || ${MACHINE_CPU} == "sh3" \ 206 || ${MACHINE_CPU} == "vax" || ${MACHINE_ARCH} == "m68000" 207 CPPFLAGS+= -I${RUMPTOP}/../../common/lib/libc/atomic 208 SRCS+= atomic_cas_generic.c 209 #SRCS+= rump_atomic_cas_up.c 210 .endif 211 212 .include <bsd.lib.mk> 213 .include <bsd.klinks.mk> 214
Indexes created Wed Oct 15 16:09:53 GMT 2025