emul.c revision 1.187 1 /* $NetBSD: emul.c,v 1.187 2018/10/05 09:51:55 hannken Exp $ */
2
3 /*
4 * Copyright (c) 2007-2011 Antti Kantee. All Rights Reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 *
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
16 * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
17 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
18 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
21 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25 * SUCH DAMAGE.
26 */
27
28 #include <sys/cdefs.h>
29 __KERNEL_RCSID(0, "$NetBSD: emul.c,v 1.187 2018/10/05 09:51:55 hannken Exp $");
30
31 #include <sys/param.h>
32 #include <sys/cprng.h>
33 #include <sys/filedesc.h>
34 #include <sys/fstrans.h>
35 #include <sys/kauth.h>
36 #include <sys/module.h>
37 #include <sys/reboot.h>
38 #include <sys/syscall.h>
39 #include <sys/pserialize.h>
40 #ifdef LOCKDEBUG
41 #include <sys/sleepq.h>
42 #endif
43
44 #include <dev/cons.h>
45
46 #include <rump-sys/kern.h>
47
48 #include <rump/rumpuser.h>
49
50 void (*rump_vfs_fini)(void) = (void *)nullop;
51
52 /*
53 * physmem is largely unused (except for nmbcluster calculations),
54 * so pick a default value which suits ZFS. if an application wants
55 * a very small memory footprint, it can still adjust this before
56 * calling rump_init()
57 */
58 #define PHYSMEM 512*256
59 psize_t physmem = PHYSMEM;
60 int nkmempages = PHYSMEM/2; /* from le chapeau */
61 #undef PHYSMEM
62
63 struct vnode *rootvp;
64 dev_t rootdev = NODEV;
65
66 const int schedppq = 1;
67 bool mp_online = false;
68 struct timespec boottime;
69 int cold = 1;
70 int boothowto = AB_SILENT;
71 struct tty *constty;
72
73 const struct bdevsw *bdevsw0[255];
74 const struct bdevsw **bdevsw = bdevsw0;
75 const int sys_cdevsws = 255;
76 int max_cdevsws = 255;
77
78 const struct cdevsw *cdevsw0[255];
79 const struct cdevsw **cdevsw = cdevsw0;
80 const int sys_bdevsws = 255;
81 int max_bdevsws = 255;
82
83 int mem_no = 2;
84
85 device_t booted_device;
86 device_t booted_wedge;
87 int booted_partition;
88 const char *booted_method;
89
90 /* XXX: unused */
91 kmutex_t tty_lock;
92 krwlock_t exec_lock;
93
94 /* sparc doesn't sport constant page size, pretend we have 4k pages */
95 #ifdef __sparc__
96 int nbpg = 4096;
97 int pgofset = 4096-1;
98 int pgshift = 12;
99 #endif
100
101 /* on sun3 VM_MAX_ADDRESS is a const variable */
102 /* XXX: should be moved into rump.c and initialize for sun3 and sun3x? */
103 #ifdef sun3
104 const vaddr_t kernbase = KERNBASE3;
105 #endif
106
107 struct loadavg averunnable = {
108 { 0 * FSCALE,
109 1 * FSCALE,
110 11 * FSCALE, },
111 FSCALE,
112 };
113
114 /*
115 * Include the autogenerated list of auto-loadable syscalls
116 */
117 #include <kern/syscalls_autoload.c>
118
119 struct emul emul_netbsd = {
120 .e_name = "netbsd-rump",
121 .e_sysent = rump_sysent,
122 .e_nomodbits = rump_sysent_nomodbits,
123 #ifndef __HAVE_MINIMAL_EMUL
124 .e_nsysent = SYS_NSYSENT,
125 #endif
126 .e_vm_default_addr = uvm_default_mapaddr,
127 #ifdef __HAVE_SYSCALL_INTERN
128 .e_syscall_intern = syscall_intern,
129 #endif
130 .e_sc_autoload = netbsd_syscalls_autoload,
131 };
132
133 cprng_strong_t *kern_cprng;
134
135 /* not used, but need the symbols for pointer comparisons */
136 syncobj_t mutex_syncobj, rw_syncobj;
137
138 int
139 kpause(const char *wmesg, bool intr, int timeo, kmutex_t *mtx)
140 {
141 extern int hz;
142 int rv __diagused;
143 uint64_t sec, nsec;
144
145 if (mtx)
146 mutex_exit(mtx);
147
148 sec = timeo / hz;
149 nsec = (timeo % hz) * (1000000000 / hz);
150 rv = rumpuser_clock_sleep(RUMPUSER_CLOCK_RELWALL, sec, nsec);
151 KASSERT(rv == 0);
152
153 if (mtx)
154 mutex_enter(mtx);
155
156 return 0;
157 }
158
159 vaddr_t
160 calc_cache_size(vsize_t vasz, int pct, int va_pct)
161 {
162 paddr_t t;
163
164 t = (paddr_t)physmem * pct / 100 * PAGE_SIZE;
165 if ((vaddr_t)t != t) {
166 panic("%s: needs tweak", __func__);
167 }
168 return t;
169 }
170
171 #define RETURN_ADDRESS (uintptr_t)__builtin_return_address(0)
172
173 void
174 assert_sleepable(void)
175 {
176 const char *reason = NULL;
177
178 /* always sleepable, although we should improve this */
179
180 if (!pserialize_not_in_read_section()) {
181 reason = "pserialize";
182 }
183
184 if (reason) {
185 panic("%s: %s caller=%p", __func__, reason,
186 (void *)RETURN_ADDRESS);
187 }
188 }
189
190 void
191 module_init_md(void)
192 {
193
194 /*
195 * Nothing for now. However, we should load the librump
196 * symbol table.
197 */
198 }
199
200 /*
201 * Try to emulate all the MD definitions of DELAY() / delay().
202 * Would be nice to fix the #defines in MD headers, but this quicker.
203 *
204 * XXX: we'd need a rumpuser_clock_sleep_nowrap() here. Since we
205 * don't have it in the current hypercall revision, busyloop.
206 * Note that rather than calibrate a loop delay and work with that,
207 * get call gettime (which does not block) in a loop to make sure
208 * we didn't get virtual ghosttime. That might be slightly inaccurate
209 * for very small delays ...
210 *
211 * The other option would be to run a thread in the hypervisor which
212 * sleeps for us and we can wait for it using rumpuser_cv_wait_nowrap()
213 * Probably too fussy. Better just wait for hypercall rev 18 ;)
214 */
215 static void
216 rump_delay(unsigned int us)
217 {
218 struct timespec target, tmp;
219 uint64_t sec, sec_ini, sec_now;
220 long nsec, nsec_ini, nsec_now;
221 int loops;
222
223 rumpuser_clock_gettime(RUMPUSER_CLOCK_ABSMONO, &sec_ini, &nsec_ini);
224
225 #ifdef __mac68k__
226 sec = us / 1000;
227 nsec = (us % 1000) * 1000000;
228 #else
229 sec = us / 1000000;
230 nsec = (us % 1000000) * 1000;
231 #endif
232
233 target.tv_sec = sec_ini;
234 tmp.tv_sec = sec;
235 target.tv_nsec = nsec_ini;
236 tmp.tv_nsec = nsec;
237 timespecadd(&target, &tmp, &target);
238
239 if (__predict_false(sec != 0))
240 printf("WARNING: over 1s delay\n");
241
242 for (loops = 0; loops < 1000*1000*100; loops++) {
243 struct timespec cur;
244
245 rumpuser_clock_gettime(RUMPUSER_CLOCK_ABSMONO,
246 &sec_now, &nsec_now);
247 cur.tv_sec = sec_now;
248 cur.tv_nsec = nsec_now;
249 if (timespeccmp(&cur, &target, >=)) {
250 return;
251 }
252 }
253 printf("WARNING: DELAY ESCAPED\n");
254 }
255 void (*delay_func)(unsigned int) = rump_delay;
256 __strong_alias(delay,rump_delay);
257 __strong_alias(_delay,rump_delay);
258
259 /* Weak aliases for fstrans to be used unless librumpvfs is present. */
260
261 void rump_fstrans_start(struct mount *);
262 void
263 rump_fstrans_start(struct mount *mp)
264 {
265
266 }
267 __weak_alias(fstrans_start,rump_fstrans_start);
268
269 int rump_fstrans_start_nowait(struct mount *);
270 int
271 rump_fstrans_start_nowait(struct mount *mp)
272 {
273
274 return 0;
275 }
276 __weak_alias(fstrans_start_nowait,rump_fstrans_start_nowait);
277
278 void rump_fstrans_start_lazy(struct mount *);
279 void
280 rump_fstrans_start_lazy(struct mount *mp)
281 {
282
283 }
284 __weak_alias(fstrans_start_lazy,rump_fstrans_start_lazy);
285
286
287 void rump_fstrans_done(struct mount *);
288 void
289 rump_fstrans_done(struct mount *mp)
290 {
291
292 }
293 __weak_alias(fstrans_done,rump_fstrans_done);
294
295 /*
296 * Provide weak aliases for tty routines used by printf.
297 * They will be used unless the rumpkern_tty component is present.
298 */
299
300 int rump_ttycheckoutq(struct tty *, int);
301 int
302 rump_ttycheckoutq(struct tty *tp, int wait)
303 {
304
305 return 1;
306 }
307 __weak_alias(ttycheckoutq,rump_ttycheckoutq);
308
309 int rump_tputchar(int, int, struct tty *);
310 int
311 rump_tputchar(int c, int flags, struct tty *tp)
312 {
313
314 cnputc(c);
315 return 0;
316 }
317 __weak_alias(tputchar,rump_tputchar);
318
319 void
320 cnputc(int c)
321 {
322
323 rumpuser_putchar(c);
324 }
325
326 void
327 cnflush(void)
328 {
329
330 /* done */
331 }
332
333 void
334 resettodr(void)
335 {
336
337 /* setting clocks is not in the jurisdiction of rump kernels */
338 }
339
340 #ifdef __HAVE_SYSCALL_INTERN
341 void
342 syscall_intern(struct proc *p)
343 {
344
345 p->p_emuldata = NULL;
346 }
347 #endif
348
349 #ifdef LOCKDEBUG
350 void
351 turnstile_print(volatile void *obj, void (*pr)(const char *, ...))
352 {
353
354 /* nada */
355 }
356 #endif
357
358 void
359 cpu_reboot(int howto, char *bootstr)
360 {
361 int ruhow = 0;
362 void *finiarg;
363
364 printf("rump kernel halting...\n");
365
366 if (!RUMP_LOCALPROC_P(curproc))
367 finiarg = RUMP_SPVM2CTL(curproc->p_vmspace);
368 else
369 finiarg = NULL;
370
371 /* dump means we really take the dive here */
372 if ((howto & RB_DUMP) || panicstr) {
373 ruhow = RUMPUSER_PANIC;
374 goto out;
375 }
376
377 /* try to sync */
378 if (!((howto & RB_NOSYNC) || panicstr)) {
379 rump_vfs_fini();
380 }
381
382 doshutdownhooks();
383
384 /* your wish is my command */
385 if (howto & RB_HALT) {
386 printf("rump kernel halted (with RB_HALT, not exiting)\n");
387 rump_sysproxy_fini(finiarg);
388 for (;;) {
389 rumpuser_clock_sleep(RUMPUSER_CLOCK_RELWALL, 10, 0);
390 }
391 }
392
393 /* this function is __dead, we must exit */
394 out:
395 rump_sysproxy_fini(finiarg);
396 rumpuser_exit(ruhow);
397 }
398
399 const char *
400 cpu_getmodel(void)
401 {
402
403 return "rumpcore (virtual)";
404 }
405