ext2fs.h revision 1.26.10.2 1 1.26.10.2 yamt /* $NetBSD: ext2fs.h,v 1.26.10.2 2010/03/11 15:04:43 yamt Exp $ */
2 1.1 bouyer
3 1.1 bouyer /*
4 1.1 bouyer * Copyright (c) 1982, 1986, 1993
5 1.1 bouyer * The Regents of the University of California. All rights reserved.
6 1.13 agc *
7 1.13 agc * Redistribution and use in source and binary forms, with or without
8 1.13 agc * modification, are permitted provided that the following conditions
9 1.13 agc * are met:
10 1.13 agc * 1. Redistributions of source code must retain the above copyright
11 1.13 agc * notice, this list of conditions and the following disclaimer.
12 1.13 agc * 2. Redistributions in binary form must reproduce the above copyright
13 1.13 agc * notice, this list of conditions and the following disclaimer in the
14 1.13 agc * documentation and/or other materials provided with the distribution.
15 1.13 agc * 3. Neither the name of the University nor the names of its contributors
16 1.13 agc * may be used to endorse or promote products derived from this software
17 1.13 agc * without specific prior written permission.
18 1.13 agc *
19 1.13 agc * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
20 1.13 agc * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21 1.13 agc * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22 1.13 agc * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
23 1.13 agc * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
24 1.13 agc * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
25 1.13 agc * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
26 1.13 agc * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
27 1.13 agc * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
28 1.13 agc * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
29 1.13 agc * SUCH DAMAGE.
30 1.13 agc *
31 1.13 agc * @(#)fs.h 8.10 (Berkeley) 10/27/94
32 1.13 agc * Modified for ext2fs by Manuel Bouyer.
33 1.13 agc */
34 1.13 agc
35 1.13 agc /*
36 1.13 agc * Copyright (c) 1997 Manuel Bouyer.
37 1.1 bouyer *
38 1.1 bouyer * Redistribution and use in source and binary forms, with or without
39 1.1 bouyer * modification, are permitted provided that the following conditions
40 1.1 bouyer * are met:
41 1.1 bouyer * 1. Redistributions of source code must retain the above copyright
42 1.1 bouyer * notice, this list of conditions and the following disclaimer.
43 1.1 bouyer * 2. Redistributions in binary form must reproduce the above copyright
44 1.1 bouyer * notice, this list of conditions and the following disclaimer in the
45 1.1 bouyer * documentation and/or other materials provided with the distribution.
46 1.1 bouyer *
47 1.15 bouyer * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
48 1.15 bouyer * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
49 1.15 bouyer * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
50 1.15 bouyer * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
51 1.15 bouyer * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
52 1.15 bouyer * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
53 1.15 bouyer * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
54 1.15 bouyer * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
55 1.15 bouyer * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
56 1.15 bouyer * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
57 1.1 bouyer *
58 1.1 bouyer * @(#)fs.h 8.10 (Berkeley) 10/27/94
59 1.1 bouyer * Modified for ext2fs by Manuel Bouyer.
60 1.1 bouyer */
61 1.5 bouyer
62 1.11 matt #ifndef _UFS_EXT2FS_EXT2FS_H_
63 1.11 matt #define _UFS_EXT2FS_EXT2FS_H_
64 1.11 matt
65 1.21 dsl #include <sys/bswap.h>
66 1.1 bouyer
67 1.1 bouyer /*
68 1.1 bouyer * Each disk drive contains some number of file systems.
69 1.1 bouyer * A file system consists of a number of cylinder groups.
70 1.1 bouyer * Each cylinder group has inodes and data.
71 1.1 bouyer *
72 1.1 bouyer * A file system is described by its super-block, which in turn
73 1.1 bouyer * describes the cylinder groups. The super-block is critical
74 1.1 bouyer * data and is replicated in each cylinder group to protect against
75 1.1 bouyer * catastrophic loss. This is done at `newfs' time and the critical
76 1.1 bouyer * super-block data does not change, so the copies need not be
77 1.1 bouyer * referenced further unless disaster strikes.
78 1.1 bouyer *
79 1.1 bouyer * The first boot and super blocks are given in absolute disk addresses.
80 1.1 bouyer * The byte-offset forms are preferred, as they don't imply a sector size.
81 1.1 bouyer */
82 1.1 bouyer #define BBSIZE 1024
83 1.1 bouyer #define SBSIZE 1024
84 1.1 bouyer #define BBOFF ((off_t)(0))
85 1.1 bouyer #define SBOFF ((off_t)(BBOFF + BBSIZE))
86 1.12 fvdl #define BBLOCK ((daddr_t)(0))
87 1.12 fvdl #define SBLOCK ((daddr_t)(BBLOCK + BBSIZE / DEV_BSIZE))
88 1.1 bouyer
89 1.1 bouyer /*
90 1.1 bouyer * Addresses stored in inodes are capable of addressing blocks
91 1.1 bouyer * XXX
92 1.1 bouyer */
93 1.1 bouyer
94 1.1 bouyer /*
95 1.1 bouyer * MINBSIZE is the smallest allowable block size.
96 1.1 bouyer * MINBSIZE must be big enough to hold a cylinder group block,
97 1.1 bouyer * thus changes to (struct cg) must keep its size within MINBSIZE.
98 1.1 bouyer * Note that super blocks are always of size SBSIZE,
99 1.1 bouyer * and that both SBSIZE and MAXBSIZE must be >= MINBSIZE.
100 1.1 bouyer */
101 1.25 tsutsui #define LOG_MINBSIZE 10
102 1.1 bouyer #define MINBSIZE (1 << LOG_MINBSIZE)
103 1.1 bouyer
104 1.1 bouyer /*
105 1.1 bouyer * The path name on which the file system is mounted is maintained
106 1.1 bouyer * in fs_fsmnt. MAXMNTLEN defines the amount of space allocated in
107 1.1 bouyer * the super block for this name.
108 1.1 bouyer */
109 1.1 bouyer #define MAXMNTLEN 512
110 1.1 bouyer
111 1.1 bouyer /*
112 1.1 bouyer * MINFREE gives the minimum acceptable percentage of file system
113 1.1 bouyer * blocks which may be free. If the freelist drops below this level
114 1.1 bouyer * only the superuser may continue to allocate blocks. This may
115 1.1 bouyer * be set to 0 if no reserve of free blocks is deemed necessary,
116 1.1 bouyer * however throughput drops by fifty percent if the file system
117 1.1 bouyer * is run at between 95% and 100% full; thus the minimum default
118 1.1 bouyer * value of fs_minfree is 5%. However, to get good clustering
119 1.1 bouyer * performance, 10% is a better choice. hence we use 10% as our
120 1.1 bouyer * default value. With 10% free space, fragmentation is not a
121 1.1 bouyer * problem, so we choose to optimize for time.
122 1.1 bouyer */
123 1.1 bouyer #define MINFREE 5
124 1.1 bouyer
125 1.1 bouyer /*
126 1.1 bouyer * Super block for an ext2fs file system.
127 1.1 bouyer */
128 1.1 bouyer struct ext2fs {
129 1.26.10.1 yamt uint32_t e2fs_icount; /* Inode count */
130 1.26.10.1 yamt uint32_t e2fs_bcount; /* blocks count */
131 1.26.10.1 yamt uint32_t e2fs_rbcount; /* reserved blocks count */
132 1.26.10.1 yamt uint32_t e2fs_fbcount; /* free blocks count */
133 1.26.10.1 yamt uint32_t e2fs_ficount; /* free inodes count */
134 1.26.10.1 yamt uint32_t e2fs_first_dblock; /* first data block */
135 1.26.10.1 yamt uint32_t e2fs_log_bsize; /* block size = 1024*(2^e2fs_log_bsize) */
136 1.26.10.1 yamt uint32_t e2fs_fsize; /* fragment size */
137 1.26.10.1 yamt uint32_t e2fs_bpg; /* blocks per group */
138 1.26.10.1 yamt uint32_t e2fs_fpg; /* frags per group */
139 1.26.10.1 yamt uint32_t e2fs_ipg; /* inodes per group */
140 1.26.10.1 yamt uint32_t e2fs_mtime; /* mount time */
141 1.26.10.1 yamt uint32_t e2fs_wtime; /* write time */
142 1.26.10.1 yamt uint16_t e2fs_mnt_count; /* mount count */
143 1.26.10.1 yamt uint16_t e2fs_max_mnt_count; /* max mount count */
144 1.26.10.1 yamt uint16_t e2fs_magic; /* magic number */
145 1.26.10.1 yamt uint16_t e2fs_state; /* file system state */
146 1.26.10.1 yamt uint16_t e2fs_beh; /* behavior on errors */
147 1.26.10.1 yamt uint16_t e2fs_minrev; /* minor revision level */
148 1.26.10.1 yamt uint32_t e2fs_lastfsck; /* time of last fsck */
149 1.26.10.1 yamt uint32_t e2fs_fsckintv; /* max time between fscks */
150 1.26.10.1 yamt uint32_t e2fs_creator; /* creator OS */
151 1.26.10.1 yamt uint32_t e2fs_rev; /* revision level */
152 1.26.10.1 yamt uint16_t e2fs_ruid; /* default uid for reserved blocks */
153 1.26.10.1 yamt uint16_t e2fs_rgid; /* default gid for reserved blocks */
154 1.8 bouyer /* EXT2_DYNAMIC_REV superblocks */
155 1.26.10.1 yamt uint32_t e2fs_first_ino; /* first non-reserved inode */
156 1.26.10.1 yamt uint16_t e2fs_inode_size; /* size of inode structure */
157 1.26.10.1 yamt uint16_t e2fs_block_group_nr; /* block grp number of this sblk*/
158 1.26.10.1 yamt uint32_t e2fs_features_compat; /* compatible feature set */
159 1.26.10.1 yamt uint32_t e2fs_features_incompat; /* incompatible feature set */
160 1.26.10.1 yamt uint32_t e2fs_features_rocompat; /* RO-compatible feature set */
161 1.26.10.1 yamt uint8_t e2fs_uuid[16]; /* 128-bit uuid for volume */
162 1.26.10.1 yamt char e2fs_vname[16]; /* volume name */
163 1.26.10.1 yamt char e2fs_fsmnt[64]; /* name mounted on */
164 1.26.10.1 yamt uint32_t e2fs_algo; /* For compression */
165 1.26.10.1 yamt uint8_t e2fs_prealloc; /* # of blocks to preallocate */
166 1.26.10.1 yamt uint8_t e2fs_dir_prealloc; /* # of blocks to preallocate for dir */
167 1.26.10.1 yamt uint16_t e2fs_reserved_ngdb; /* # of reserved gd blocks for resize */
168 1.26.10.1 yamt uint32_t reserved2[204];
169 1.1 bouyer };
170 1.1 bouyer
171 1.1 bouyer
172 1.1 bouyer /* in-memory data for ext2fs */
173 1.1 bouyer struct m_ext2fs {
174 1.1 bouyer struct ext2fs e2fs;
175 1.1 bouyer u_char e2fs_fsmnt[MAXMNTLEN]; /* name mounted on */
176 1.8 bouyer int8_t e2fs_ronly; /* mounted read-only flag */
177 1.8 bouyer int8_t e2fs_fmod; /* super block modified flag */
178 1.8 bouyer int32_t e2fs_bsize; /* block size */
179 1.8 bouyer int32_t e2fs_bshift; /* ``lblkno'' calc of logical blkno */
180 1.8 bouyer int32_t e2fs_bmask; /* ``blkoff'' calc of blk offsets */
181 1.8 bouyer int64_t e2fs_qbmask; /* ~fs_bmask - for use with quad size */
182 1.8 bouyer int32_t e2fs_fsbtodb; /* fsbtodb and dbtofsb shift constant */
183 1.8 bouyer int32_t e2fs_ncg; /* number of cylinder groups */
184 1.8 bouyer int32_t e2fs_ngdb; /* number of group descriptor block */
185 1.8 bouyer int32_t e2fs_ipb; /* number of inodes per block */
186 1.8 bouyer int32_t e2fs_itpg; /* number of inode table per group */
187 1.8 bouyer struct ext2_gd *e2fs_gd; /* group descripors */
188 1.1 bouyer };
189 1.1 bouyer
190 1.1 bouyer
191 1.1 bouyer
192 1.1 bouyer /*
193 1.1 bouyer * Filesystem identification
194 1.1 bouyer */
195 1.1 bouyer #define E2FS_MAGIC 0xef53 /* the ext2fs magic number */
196 1.23 tsutsui #define E2FS_REV0 0 /* GOOD_OLD revision */
197 1.23 tsutsui #define E2FS_REV1 1 /* Support compat/incompat features */
198 1.9 bouyer
199 1.23 tsutsui /* compatible/incompatible features */
200 1.9 bouyer #define EXT2F_COMPAT_PREALLOC 0x0001
201 1.26.10.2 yamt #define EXT2F_COMPAT_HASJOURNAL 0x0004
202 1.24 tsutsui #define EXT2F_COMPAT_RESIZE 0x0010
203 1.9 bouyer
204 1.9 bouyer #define EXT2F_ROCOMPAT_SPARSESUPER 0x0001
205 1.9 bouyer #define EXT2F_ROCOMPAT_LARGEFILE 0x0002
206 1.9 bouyer #define EXT2F_ROCOMPAT_BTREE_DIR 0x0004
207 1.9 bouyer
208 1.9 bouyer #define EXT2F_INCOMPAT_COMP 0x0001
209 1.9 bouyer #define EXT2F_INCOMPAT_FTYPE 0x0002
210 1.9 bouyer
211 1.23 tsutsui /*
212 1.23 tsutsui * Features supported in this implementation
213 1.23 tsutsui *
214 1.23 tsutsui * We support the following REV1 features:
215 1.23 tsutsui * - EXT2F_ROCOMPAT_SPARSESUPER
216 1.23 tsutsui * superblock backups stored only in cg_has_sb(bno) groups
217 1.23 tsutsui * - EXT2F_ROCOMPAT_LARGEFILE
218 1.23 tsutsui * use e2di_dacl in struct ext2fs_dinode to store
219 1.23 tsutsui * upper 32bit of size for >2GB files
220 1.23 tsutsui * - EXT2F_INCOMPAT_FTYPE
221 1.23 tsutsui * store file type to e2d_type in struct ext2fs_direct
222 1.23 tsutsui * (on REV0 e2d_namlen is uint16_t and no e2d_type, like ffs)
223 1.23 tsutsui */
224 1.9 bouyer #define EXT2F_COMPAT_SUPP 0x0000
225 1.16 ws #define EXT2F_ROCOMPAT_SUPP (EXT2F_ROCOMPAT_SPARSESUPER \
226 1.16 ws | EXT2F_ROCOMPAT_LARGEFILE)
227 1.9 bouyer #define EXT2F_INCOMPAT_SUPP EXT2F_INCOMPAT_FTYPE
228 1.1 bouyer
229 1.1 bouyer /*
230 1.23 tsutsui * Definitions of behavior on errors
231 1.23 tsutsui */
232 1.23 tsutsui #define E2FS_BEH_CONTINUE 1 /* continue operation */
233 1.23 tsutsui #define E2FS_BEH_READONLY 2 /* remount fs read only */
234 1.23 tsutsui #define E2FS_BEH_PANIC 3 /* cause panic */
235 1.23 tsutsui #define E2FS_BEH_DEFAULT E2FS_BEH_CONTINUE
236 1.23 tsutsui
237 1.23 tsutsui /*
238 1.1 bouyer * OS identification
239 1.1 bouyer */
240 1.23 tsutsui #define E2FS_OS_LINUX 0
241 1.23 tsutsui #define E2FS_OS_HURD 1
242 1.23 tsutsui #define E2FS_OS_MASIX 2
243 1.23 tsutsui #define E2FS_OS_FREEBSD 3
244 1.23 tsutsui #define E2FS_OS_LITES 4
245 1.1 bouyer
246 1.1 bouyer /*
247 1.1 bouyer * Filesystem clean flags
248 1.1 bouyer */
249 1.1 bouyer #define E2FS_ISCLEAN 0x01
250 1.9 bouyer #define E2FS_ERRORS 0x02
251 1.1 bouyer
252 1.1 bouyer /* ext2 file system block group descriptor */
253 1.1 bouyer
254 1.1 bouyer struct ext2_gd {
255 1.26.10.1 yamt uint32_t ext2bgd_b_bitmap; /* blocks bitmap block */
256 1.26.10.1 yamt uint32_t ext2bgd_i_bitmap; /* inodes bitmap block */
257 1.26.10.1 yamt uint32_t ext2bgd_i_tables; /* inodes table block */
258 1.26.10.1 yamt uint16_t ext2bgd_nbfree; /* number of free blocks */
259 1.26.10.1 yamt uint16_t ext2bgd_nifree; /* number of free inodes */
260 1.26.10.1 yamt uint16_t ext2bgd_ndirs; /* number of directories */
261 1.26.10.1 yamt uint16_t reserved;
262 1.26.10.1 yamt uint32_t reserved2[3];
263 1.1 bouyer };
264 1.10 bouyer
265 1.10 bouyer
266 1.10 bouyer /*
267 1.10 bouyer * If the EXT2F_ROCOMPAT_SPARSESUPER flag is set, the cylinder group has a
268 1.10 bouyer * copy of the super and cylinder group descriptors blocks only if it's
269 1.23 tsutsui * 1, a power of 3, 5 or 7
270 1.10 bouyer */
271 1.10 bouyer
272 1.26 perry static __inline int cg_has_sb(int) __unused;
273 1.22 perry static __inline int
274 1.25 tsutsui cg_has_sb(int i)
275 1.10 bouyer {
276 1.25 tsutsui int a3, a5, a7;
277 1.10 bouyer
278 1.10 bouyer if (i == 0 || i == 1)
279 1.10 bouyer return 1;
280 1.10 bouyer for (a3 = 3, a5 = 5, a7 = 7;
281 1.10 bouyer a3 <= i || a5 <= i || a7 <= i;
282 1.10 bouyer a3 *= 3, a5 *= 5, a7 *= 7)
283 1.10 bouyer if (i == a3 || i == a5 || i == a7)
284 1.10 bouyer return 1;
285 1.10 bouyer return 0;
286 1.10 bouyer }
287 1.2 bouyer
288 1.2 bouyer /* EXT2FS metadatas are stored in little-endian byte order. These macros
289 1.2 bouyer * helps reading theses metadatas
290 1.2 bouyer */
291 1.2 bouyer
292 1.2 bouyer #if BYTE_ORDER == LITTLE_ENDIAN
293 1.2 bouyer # define h2fs16(x) (x)
294 1.2 bouyer # define h2fs32(x) (x)
295 1.12 fvdl # define h2fs64(x) (x)
296 1.2 bouyer # define fs2h16(x) (x)
297 1.2 bouyer # define fs2h32(x) (x)
298 1.12 fvdl # define fs2h64(x) (x)
299 1.4 perry # define e2fs_sbload(old, new) memcpy((new), (old), SBSIZE);
300 1.4 perry # define e2fs_cgload(old, new, size) memcpy((new), (old), (size));
301 1.4 perry # define e2fs_sbsave(old, new) memcpy((new), (old), SBSIZE);
302 1.4 perry # define e2fs_cgsave(old, new, size) memcpy((new), (old), (size));
303 1.2 bouyer #else
304 1.18 xtraeme void e2fs_sb_bswap(struct ext2fs *, struct ext2fs *);
305 1.18 xtraeme void e2fs_cg_bswap(struct ext2_gd *, struct ext2_gd *, int);
306 1.2 bouyer # define h2fs16(x) bswap16(x)
307 1.2 bouyer # define h2fs32(x) bswap32(x)
308 1.12 fvdl # define h2fs64(x) bswap64(x)
309 1.2 bouyer # define fs2h16(x) bswap16(x)
310 1.2 bouyer # define fs2h32(x) bswap32(x)
311 1.12 fvdl # define fs2h64(x) bswap64(x)
312 1.2 bouyer # define e2fs_sbload(old, new) e2fs_sb_bswap((old), (new))
313 1.2 bouyer # define e2fs_cgload(old, new, size) e2fs_cg_bswap((old), (new), (size));
314 1.2 bouyer # define e2fs_sbsave(old, new) e2fs_sb_bswap((old), (new))
315 1.2 bouyer # define e2fs_cgsave(old, new, size) e2fs_cg_bswap((old), (new), (size));
316 1.2 bouyer #endif
317 1.1 bouyer
318 1.1 bouyer /*
319 1.1 bouyer * Turn file system block numbers into disk block addresses.
320 1.1 bouyer * This maps file system blocks to device size blocks.
321 1.1 bouyer */
322 1.1 bouyer #define fsbtodb(fs, b) ((b) << (fs)->e2fs_fsbtodb)
323 1.1 bouyer #define dbtofsb(fs, b) ((b) >> (fs)->e2fs_fsbtodb)
324 1.1 bouyer
325 1.1 bouyer /*
326 1.1 bouyer * Macros for handling inode numbers:
327 1.1 bouyer * inode number to file system block offset.
328 1.1 bouyer * inode number to cylinder group number.
329 1.1 bouyer * inode number to file system block address.
330 1.1 bouyer */
331 1.1 bouyer #define ino_to_cg(fs, x) (((x) - 1) / (fs)->e2fs.e2fs_ipg)
332 1.1 bouyer #define ino_to_fsba(fs, x) \
333 1.25 tsutsui ((fs)->e2fs_gd[ino_to_cg((fs), (x))].ext2bgd_i_tables + \
334 1.25 tsutsui (((x) - 1) % (fs)->e2fs.e2fs_ipg) / (fs)->e2fs_ipb)
335 1.25 tsutsui #define ino_to_fsbo(fs, x) (((x) - 1) % (fs)->e2fs_ipb)
336 1.1 bouyer
337 1.1 bouyer /*
338 1.1 bouyer * Give cylinder group number for a file system block.
339 1.1 bouyer * Give cylinder group block number for a file system block.
340 1.1 bouyer */
341 1.1 bouyer #define dtog(fs, d) (((d) - (fs)->e2fs.e2fs_first_dblock) / (fs)->e2fs.e2fs_fpg)
342 1.1 bouyer #define dtogd(fs, d) \
343 1.1 bouyer (((d) - (fs)->e2fs.e2fs_first_dblock) % (fs)->e2fs.e2fs_fpg)
344 1.1 bouyer
345 1.1 bouyer /*
346 1.1 bouyer * The following macros optimize certain frequently calculated
347 1.1 bouyer * quantities by using shifts and masks in place of divisions
348 1.1 bouyer * modulos and multiplications.
349 1.1 bouyer */
350 1.1 bouyer #define blkoff(fs, loc) /* calculates (loc % fs->e2fs_bsize) */ \
351 1.1 bouyer ((loc) & (fs)->e2fs_qbmask)
352 1.1 bouyer #define lblktosize(fs, blk) /* calculates (blk * fs->e2fs_bsize) */ \
353 1.1 bouyer ((blk) << (fs)->e2fs_bshift)
354 1.1 bouyer #define lblkno(fs, loc) /* calculates (loc / fs->e2fs_bsize) */ \
355 1.1 bouyer ((loc) >> (fs)->e2fs_bshift)
356 1.1 bouyer #define blkroundup(fs, size) /* calculates roundup(size, fs->e2fs_bsize) */ \
357 1.1 bouyer (((size) + (fs)->e2fs_qbmask) & (fs)->e2fs_bmask)
358 1.1 bouyer #define fragroundup(fs, size) /* calculates roundup(size, fs->e2fs_bsize) */ \
359 1.1 bouyer (((size) + (fs)->e2fs_qbmask) & (fs)->e2fs_bmask)
360 1.17 perry /*
361 1.1 bouyer * Determine the number of available frags given a
362 1.1 bouyer * percentage to hold in reserve.
363 1.17 perry */
364 1.1 bouyer #define freespace(fs) \
365 1.17 perry ((fs)->e2fs.e2fs_fbcount - (fs)->e2fs.e2fs_rbcount)
366 1.1 bouyer
367 1.1 bouyer /*
368 1.1 bouyer * Number of indirects in a file system block.
369 1.1 bouyer */
370 1.26.10.1 yamt #define NINDIR(fs) ((fs)->e2fs_bsize / sizeof(uint32_t))
371 1.11 matt
372 1.11 matt #endif /* !_UFS_EXT2FS_EXT2FS_H_ */
373