Home | History | Annotate | Line # | Download | only in ext2fs
ext2fs.h revision 1.36.10.2
      1  1.36.10.2     skrll /*	$NetBSD: ext2fs.h,v 1.36.10.2 2016/10/05 20:56:11 skrll Exp $	*/
      2        1.1    bouyer 
      3        1.1    bouyer /*
      4        1.1    bouyer  * Copyright (c) 1982, 1986, 1993
      5        1.1    bouyer  *	The Regents of the University of California.  All rights reserved.
      6       1.13       agc  *
      7       1.13       agc  * Redistribution and use in source and binary forms, with or without
      8       1.13       agc  * modification, are permitted provided that the following conditions
      9       1.13       agc  * are met:
     10       1.13       agc  * 1. Redistributions of source code must retain the above copyright
     11       1.13       agc  *    notice, this list of conditions and the following disclaimer.
     12       1.13       agc  * 2. Redistributions in binary form must reproduce the above copyright
     13       1.13       agc  *    notice, this list of conditions and the following disclaimer in the
     14       1.13       agc  *    documentation and/or other materials provided with the distribution.
     15       1.13       agc  * 3. Neither the name of the University nor the names of its contributors
     16       1.13       agc  *    may be used to endorse or promote products derived from this software
     17       1.13       agc  *    without specific prior written permission.
     18       1.13       agc  *
     19       1.13       agc  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
     20       1.13       agc  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     21       1.13       agc  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     22       1.13       agc  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
     23       1.13       agc  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     24       1.13       agc  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     25       1.13       agc  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     26       1.13       agc  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     27       1.13       agc  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     28       1.13       agc  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     29       1.13       agc  * SUCH DAMAGE.
     30       1.13       agc  *
     31       1.13       agc  *	@(#)fs.h	8.10 (Berkeley) 10/27/94
     32       1.13       agc  *  Modified for ext2fs by Manuel Bouyer.
     33       1.13       agc  */
     34       1.13       agc 
     35       1.13       agc /*
     36       1.13       agc  * Copyright (c) 1997 Manuel Bouyer.
     37        1.1    bouyer  *
     38        1.1    bouyer  * Redistribution and use in source and binary forms, with or without
     39        1.1    bouyer  * modification, are permitted provided that the following conditions
     40        1.1    bouyer  * are met:
     41        1.1    bouyer  * 1. Redistributions of source code must retain the above copyright
     42        1.1    bouyer  *    notice, this list of conditions and the following disclaimer.
     43        1.1    bouyer  * 2. Redistributions in binary form must reproduce the above copyright
     44        1.1    bouyer  *    notice, this list of conditions and the following disclaimer in the
     45        1.1    bouyer  *    documentation and/or other materials provided with the distribution.
     46        1.1    bouyer  *
     47       1.15    bouyer  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     48       1.15    bouyer  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     49       1.15    bouyer  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     50       1.15    bouyer  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     51       1.15    bouyer  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     52       1.15    bouyer  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     53       1.15    bouyer  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     54       1.15    bouyer  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     55       1.15    bouyer  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     56       1.15    bouyer  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     57        1.1    bouyer  *
     58        1.1    bouyer  *	@(#)fs.h	8.10 (Berkeley) 10/27/94
     59        1.1    bouyer  *  Modified for ext2fs by Manuel Bouyer.
     60        1.1    bouyer  */
     61        1.5    bouyer 
     62       1.11      matt #ifndef _UFS_EXT2FS_EXT2FS_H_
     63       1.11      matt #define _UFS_EXT2FS_EXT2FS_H_
     64       1.11      matt 
     65       1.21       dsl #include <sys/bswap.h>
     66        1.1    bouyer 
     67        1.1    bouyer /*
     68        1.1    bouyer  * Each disk drive contains some number of file systems.
     69        1.1    bouyer  * A file system consists of a number of cylinder groups.
     70        1.1    bouyer  * Each cylinder group has inodes and data.
     71        1.1    bouyer  *
     72        1.1    bouyer  * A file system is described by its super-block, which in turn
     73        1.1    bouyer  * describes the cylinder groups.  The super-block is critical
     74        1.1    bouyer  * data and is replicated in each cylinder group to protect against
     75        1.1    bouyer  * catastrophic loss.  This is done at `newfs' time and the critical
     76        1.1    bouyer  * super-block data does not change, so the copies need not be
     77        1.1    bouyer  * referenced further unless disaster strikes.
     78        1.1    bouyer  *
     79        1.1    bouyer  * The first boot and super blocks are given in absolute disk addresses.
     80        1.1    bouyer  * The byte-offset forms are preferred, as they don't imply a sector size.
     81        1.1    bouyer  */
     82        1.1    bouyer #define BBSIZE		1024
     83        1.1    bouyer #define SBSIZE		1024
     84        1.1    bouyer #define	BBOFF		((off_t)(0))
     85        1.1    bouyer #define	SBOFF		((off_t)(BBOFF + BBSIZE))
     86       1.12      fvdl #define	BBLOCK		((daddr_t)(0))
     87       1.12      fvdl #define	SBLOCK		((daddr_t)(BBLOCK + BBSIZE / DEV_BSIZE))
     88        1.1    bouyer 
     89  1.36.10.1     skrll #define	fsbtodb(fs, b)  ((daddr_t)(b) << (fs)->e2fs_fsbtodb)
     90  1.36.10.1     skrll /* calculates (loc / fs->fs_bsize) */
     91  1.36.10.1     skrll #define	lblkno(fs, loc) ((loc) >> (fs->e2fs_bshift))
     92  1.36.10.1     skrll #define	blksize(fs, ip, lbn) ((fs)->e2fs_bsize)
     93  1.36.10.1     skrll 
     94        1.1    bouyer /*
     95        1.1    bouyer  * Addresses stored in inodes are capable of addressing blocks
     96        1.1    bouyer  * XXX
     97        1.1    bouyer  */
     98        1.1    bouyer 
     99        1.1    bouyer /*
    100        1.1    bouyer  * MINBSIZE is the smallest allowable block size.
    101        1.1    bouyer  * MINBSIZE must be big enough to hold a cylinder group block,
    102        1.1    bouyer  * thus changes to (struct cg) must keep its size within MINBSIZE.
    103        1.1    bouyer  * Note that super blocks are always of size SBSIZE,
    104        1.1    bouyer  * and that both SBSIZE and MAXBSIZE must be >= MINBSIZE.
    105        1.1    bouyer  */
    106       1.25   tsutsui #define LOG_MINBSIZE	10
    107        1.1    bouyer #define MINBSIZE	(1 << LOG_MINBSIZE)
    108        1.1    bouyer 
    109        1.1    bouyer /*
    110        1.1    bouyer  * The path name on which the file system is mounted is maintained
    111        1.1    bouyer  * in fs_fsmnt. MAXMNTLEN defines the amount of space allocated in
    112        1.1    bouyer  * the super block for this name.
    113        1.1    bouyer  */
    114        1.1    bouyer #define MAXMNTLEN	512
    115        1.1    bouyer 
    116        1.1    bouyer /*
    117        1.1    bouyer  * MINFREE gives the minimum acceptable percentage of file system
    118        1.1    bouyer  * blocks which may be free. If the freelist drops below this level
    119        1.1    bouyer  * only the superuser may continue to allocate blocks. This may
    120        1.1    bouyer  * be set to 0 if no reserve of free blocks is deemed necessary,
    121        1.1    bouyer  * however throughput drops by fifty percent if the file system
    122        1.1    bouyer  * is run at between 95% and 100% full; thus the minimum default
    123        1.1    bouyer  * value of fs_minfree is 5%. However, to get good clustering
    124        1.1    bouyer  * performance, 10% is a better choice. hence we use 10% as our
    125        1.1    bouyer  * default value. With 10% free space, fragmentation is not a
    126        1.1    bouyer  * problem, so we choose to optimize for time.
    127        1.1    bouyer  */
    128        1.1    bouyer #define MINFREE		5
    129        1.1    bouyer 
    130        1.1    bouyer /*
    131  1.36.10.2     skrll  * This is maximum amount of links allowed for files. For directories,
    132  1.36.10.2     skrll  * going over this means setting DIR_NLINK feature.
    133  1.36.10.2     skrll  */
    134  1.36.10.2     skrll #define EXT2FS_LINK_MAX		65000
    135  1.36.10.2     skrll #define EXT2FS_LINK_INF		1		/* link count unknown */
    136  1.36.10.2     skrll 
    137  1.36.10.2     skrll /*
    138        1.1    bouyer  * Super block for an ext2fs file system.
    139        1.1    bouyer  */
    140        1.1    bouyer struct ext2fs {
    141       1.27   tsutsui 	uint32_t  e2fs_icount;		/* Inode count */
    142       1.27   tsutsui 	uint32_t  e2fs_bcount;		/* blocks count */
    143       1.27   tsutsui 	uint32_t  e2fs_rbcount;		/* reserved blocks count */
    144       1.27   tsutsui 	uint32_t  e2fs_fbcount;		/* free blocks count */
    145       1.27   tsutsui 	uint32_t  e2fs_ficount;		/* free inodes count */
    146       1.27   tsutsui 	uint32_t  e2fs_first_dblock;	/* first data block */
    147  1.36.10.1     skrll 	uint32_t  e2fs_log_bsize;	/* bsize = 1024*(2^e2fs_log_bsize) */
    148       1.27   tsutsui 	uint32_t  e2fs_fsize;		/* fragment size */
    149       1.27   tsutsui 	uint32_t  e2fs_bpg;		/* blocks per group */
    150       1.27   tsutsui 	uint32_t  e2fs_fpg;		/* frags per group */
    151       1.27   tsutsui 	uint32_t  e2fs_ipg;		/* inodes per group */
    152       1.27   tsutsui 	uint32_t  e2fs_mtime;		/* mount time */
    153       1.27   tsutsui 	uint32_t  e2fs_wtime;		/* write time */
    154       1.27   tsutsui 	uint16_t  e2fs_mnt_count;	/* mount count */
    155       1.27   tsutsui 	uint16_t  e2fs_max_mnt_count;	/* max mount count */
    156       1.27   tsutsui 	uint16_t  e2fs_magic;		/* magic number */
    157       1.27   tsutsui 	uint16_t  e2fs_state;		/* file system state */
    158       1.27   tsutsui 	uint16_t  e2fs_beh;		/* behavior on errors */
    159       1.27   tsutsui 	uint16_t  e2fs_minrev;		/* minor revision level */
    160       1.27   tsutsui 	uint32_t  e2fs_lastfsck;	/* time of last fsck */
    161       1.27   tsutsui 	uint32_t  e2fs_fsckintv;	/* max time between fscks */
    162       1.27   tsutsui 	uint32_t  e2fs_creator;		/* creator OS */
    163       1.27   tsutsui 	uint32_t  e2fs_rev;		/* revision level */
    164       1.27   tsutsui 	uint16_t  e2fs_ruid;		/* default uid for reserved blocks */
    165       1.27   tsutsui 	uint16_t  e2fs_rgid;		/* default gid for reserved blocks */
    166        1.8    bouyer 	/* EXT2_DYNAMIC_REV superblocks */
    167       1.27   tsutsui 	uint32_t  e2fs_first_ino;	/* first non-reserved inode */
    168       1.27   tsutsui 	uint16_t  e2fs_inode_size;	/* size of inode structure */
    169       1.27   tsutsui 	uint16_t  e2fs_block_group_nr;	/* block grp number of this sblk*/
    170       1.27   tsutsui 	uint32_t  e2fs_features_compat;	/*  compatible feature set */
    171       1.27   tsutsui 	uint32_t  e2fs_features_incompat; /* incompatible feature set */
    172       1.27   tsutsui 	uint32_t  e2fs_features_rocompat; /* RO-compatible feature set */
    173       1.27   tsutsui 	uint8_t   e2fs_uuid[16];	/* 128-bit uuid for volume */
    174       1.27   tsutsui 	char      e2fs_vname[16];	/* volume name */
    175       1.27   tsutsui 	char      e2fs_fsmnt[64];	/* name mounted on */
    176       1.27   tsutsui 	uint32_t  e2fs_algo;		/* For compression */
    177       1.27   tsutsui 	uint8_t   e2fs_prealloc;	/* # of blocks to preallocate */
    178       1.27   tsutsui 	uint8_t   e2fs_dir_prealloc;	/* # of blocks to preallocate for dir */
    179       1.27   tsutsui 	uint16_t  e2fs_reserved_ngdb;	/* # of reserved gd blocks for resize */
    180  1.36.10.2     skrll 
    181  1.36.10.1     skrll 	/* Additional fields */
    182  1.36.10.1     skrll 	char      e3fs_journal_uuid[16];/* uuid of journal superblock */
    183  1.36.10.1     skrll 	uint32_t  e3fs_journal_inum;	/* inode number of journal file */
    184  1.36.10.1     skrll 	uint32_t  e3fs_journal_dev;	/* device number of journal file */
    185  1.36.10.1     skrll 	uint32_t  e3fs_last_orphan;	/* start of list of inodes to delete */
    186  1.36.10.1     skrll 	uint32_t  e3fs_hash_seed[4];	/* HTREE hash seed */
    187  1.36.10.1     skrll 	char      e3fs_def_hash_version;/* Default hash version to use */
    188  1.36.10.1     skrll 	char      e3fs_jnl_backup_type;
    189  1.36.10.1     skrll 	uint16_t  e3fs_desc_size;	/* size of group descriptor */
    190  1.36.10.1     skrll 	uint32_t  e3fs_default_mount_opts;
    191  1.36.10.1     skrll 	uint32_t  e3fs_first_meta_bg;	/* First metablock block group */
    192  1.36.10.1     skrll 	uint32_t  e3fs_mkfs_time;	/* when the fs was created */
    193  1.36.10.1     skrll 	uint32_t  e3fs_jnl_blks[17];	/* backup of the journal inode */
    194  1.36.10.1     skrll 	uint32_t  e4fs_bcount_hi;	/* high bits of blocks count */
    195  1.36.10.1     skrll 	uint32_t  e4fs_rbcount_hi;	/* high bits of reserved blocks count */
    196  1.36.10.1     skrll 	uint32_t  e4fs_fbcount_hi;	/* high bits of free blocks count */
    197  1.36.10.1     skrll 	uint16_t  e4fs_min_extra_isize; /* all inodes have some bytes */
    198  1.36.10.1     skrll 	uint16_t  e4fs_want_extra_isize;/* inodes must reserve some bytes */
    199  1.36.10.1     skrll 	uint32_t  e4fs_flags;		/* miscellaneous flags */
    200  1.36.10.1     skrll 	uint16_t  e4fs_raid_stride;	/* RAID stride */
    201  1.36.10.1     skrll 	uint16_t  e4fs_mmpintv;		/* seconds to wait in MMP checking */
    202  1.36.10.1     skrll 	uint64_t  e4fs_mmpblk;		/* block for multi-mount protection */
    203  1.36.10.1     skrll 	uint32_t  e4fs_raid_stripe_wid; /* blocks on data disks (N * stride) */
    204  1.36.10.1     skrll 	uint8_t   e4fs_log_gpf;		/* FLEX_BG group size */
    205  1.36.10.1     skrll 	uint8_t   e4fs_chksum_type;	/* metadata checksum algorithm used */
    206  1.36.10.1     skrll 	uint8_t   e4fs_encrypt;		/* versioning level for encryption */
    207  1.36.10.1     skrll 	uint8_t   e4fs_reserved_pad;
    208  1.36.10.1     skrll 	uint64_t  e4fs_kbytes_written;	/* number of lifetime kilobytes */
    209  1.36.10.1     skrll 	uint32_t  e4fs_snapinum;	/* inode number of active snapshot */
    210  1.36.10.1     skrll 	uint32_t  e4fs_snapid;		/* sequential ID of active snapshot */
    211  1.36.10.1     skrll 	uint64_t  e4fs_snaprbcount;	/* rsvd blocks for active snapshot */
    212  1.36.10.1     skrll 	uint32_t  e4fs_snaplist;	/* inode number for on-disk snapshot */
    213  1.36.10.1     skrll 	uint32_t  e4fs_errcount;	/* number of file system errors */
    214  1.36.10.1     skrll 	uint32_t  e4fs_first_errtime;	/* first time an error happened */
    215  1.36.10.1     skrll 	uint32_t  e4fs_first_errino;	/* inode involved in first error */
    216  1.36.10.1     skrll 	uint64_t  e4fs_first_errblk;	/* block involved of first error */
    217  1.36.10.1     skrll 	uint8_t   e4fs_first_errfunc[32];/* function where error happened */
    218  1.36.10.1     skrll 	uint32_t  e4fs_first_errline;	/* line number where error happened */
    219  1.36.10.1     skrll 	uint32_t  e4fs_last_errtime;	/* most recent time of an error */
    220  1.36.10.1     skrll 	uint32_t  e4fs_last_errino;	/* inode involved in last error */
    221  1.36.10.1     skrll 	uint32_t  e4fs_last_errline;	/* line number where error happened */
    222  1.36.10.1     skrll 	uint64_t  e4fs_last_errblk;	/* block involved of last error */
    223  1.36.10.1     skrll 	uint8_t   e4fs_last_errfunc[32];/* function where error happened */
    224  1.36.10.1     skrll 	uint8_t   e4fs_mount_opts[64];
    225  1.36.10.1     skrll 	uint32_t  e4fs_usrquota_inum;	/* inode for tracking user quota */
    226  1.36.10.1     skrll 	uint32_t  e4fs_grpquota_inum;	/* inode for tracking group quota */
    227  1.36.10.1     skrll 	uint32_t  e4fs_overhead_clusters;/* overhead blocks/clusters */
    228  1.36.10.1     skrll 	uint32_t  e4fs_backup_bgs[2];	/* groups with sparse_super2 SBs */
    229  1.36.10.1     skrll 	uint8_t   e4fs_encrypt_algos[4];/* encryption algorithms in use */
    230  1.36.10.1     skrll 	uint8_t   e4fs_encrypt_pw_salt[16];/* salt used for string2key */
    231  1.36.10.1     skrll 	uint32_t  e4fs_lpf_ino;		/* location of the lost+found inode */
    232  1.36.10.1     skrll 	uint32_t  e4fs_proj_quota_inum;	/* inode for tracking project quota */
    233  1.36.10.1     skrll 	uint32_t  e4fs_chksum_seed;	/* checksum seed */
    234  1.36.10.1     skrll 	uint32_t  e4fs_reserved[98];	/* padding to the end of the block */
    235  1.36.10.1     skrll 	uint32_t  e4fs_sbchksum;	/* superblock checksum */
    236        1.1    bouyer };
    237        1.1    bouyer 
    238        1.1    bouyer 
    239        1.1    bouyer /* in-memory data for ext2fs */
    240        1.1    bouyer struct m_ext2fs {
    241        1.1    bouyer 	struct ext2fs e2fs;
    242        1.1    bouyer 	u_char	e2fs_fsmnt[MAXMNTLEN];	/* name mounted on */
    243        1.8    bouyer 	int8_t	e2fs_ronly;	/* mounted read-only flag */
    244        1.8    bouyer 	int8_t	e2fs_fmod;	/* super block modified flag */
    245  1.36.10.1     skrll 	int8_t	e2fs_uhash;	/* 3 if hash should be signed, 0 if not */
    246        1.8    bouyer 	int32_t	e2fs_bsize;	/* block size */
    247        1.8    bouyer 	int32_t e2fs_bshift;	/* ``lblkno'' calc of logical blkno */
    248        1.8    bouyer 	int32_t e2fs_bmask;	/* ``blkoff'' calc of blk offsets */
    249        1.8    bouyer 	int64_t e2fs_qbmask;	/* ~fs_bmask - for use with quad size */
    250        1.8    bouyer 	int32_t	e2fs_fsbtodb;	/* fsbtodb and dbtofsb shift constant */
    251        1.8    bouyer 	int32_t	e2fs_ncg;	/* number of cylinder groups */
    252  1.36.10.2     skrll 	int32_t	e2fs_ngdb;	/* number of group descriptor blocks */
    253        1.8    bouyer 	int32_t	e2fs_ipb;	/* number of inodes per block */
    254  1.36.10.2     skrll 	int32_t	e2fs_itpg;	/* number of inode table blocks per group */
    255  1.36.10.2     skrll 	struct	ext2_gd *e2fs_gd; /* group descriptors (data not byteswapped) */
    256        1.1    bouyer };
    257        1.1    bouyer 
    258        1.1    bouyer 
    259        1.1    bouyer 
    260        1.1    bouyer /*
    261        1.1    bouyer  * Filesystem identification
    262        1.1    bouyer  */
    263        1.1    bouyer #define	E2FS_MAGIC	0xef53	/* the ext2fs magic number */
    264       1.23   tsutsui #define E2FS_REV0	0	/* GOOD_OLD revision */
    265       1.23   tsutsui #define E2FS_REV1	1	/* Support compat/incompat features */
    266        1.9    bouyer 
    267       1.23   tsutsui /* compatible/incompatible features */
    268        1.9    bouyer #define EXT2F_COMPAT_PREALLOC		0x0001
    269       1.30  christos #define EXT2F_COMPAT_AFS		0x0002
    270       1.29   tsutsui #define EXT2F_COMPAT_HASJOURNAL		0x0004
    271       1.30  christos #define EXT2F_COMPAT_EXTATTR		0x0008
    272       1.24   tsutsui #define EXT2F_COMPAT_RESIZE		0x0010
    273       1.30  christos #define EXT2F_COMPAT_DIRHASHINDEX	0x0020
    274  1.36.10.2     skrll #define EXT2F_COMPAT_SPARSESUPER2	0x0200
    275       1.30  christos #define	EXT2F_COMPAT_BITS \
    276       1.30  christos 	"\20" \
    277  1.36.10.2     skrll 	"\12COMPAT_SPARSESUPER2" \
    278  1.36.10.2     skrll 	"\11" \
    279  1.36.10.2     skrll 	"\10" \
    280  1.36.10.2     skrll 	"\07" \
    281       1.32  jakllsch 	"\06COMPAT_DIRHASHINDEX" \
    282       1.30  christos 	"\05COMPAT_RESIZE" \
    283       1.30  christos 	"\04COMPAT_EXTATTR" \
    284       1.30  christos 	"\03COMPAT_HASJOURNAL" \
    285       1.30  christos 	"\02COMPAT_AFS" \
    286       1.30  christos 	"\01COMPAT_PREALLOC"
    287        1.9    bouyer 
    288        1.9    bouyer #define EXT2F_ROCOMPAT_SPARSESUPER	0x0001
    289        1.9    bouyer #define EXT2F_ROCOMPAT_LARGEFILE	0x0002
    290        1.9    bouyer #define EXT2F_ROCOMPAT_BTREE_DIR	0x0004
    291       1.32  jakllsch #define EXT2F_ROCOMPAT_HUGE_FILE	0x0008
    292       1.32  jakllsch #define EXT2F_ROCOMPAT_GDT_CSUM		0x0010
    293       1.32  jakllsch #define EXT2F_ROCOMPAT_DIR_NLINK	0x0020
    294       1.32  jakllsch #define EXT2F_ROCOMPAT_EXTRA_ISIZE	0x0040
    295  1.36.10.2     skrll #define EXT2F_ROCOMPAT_QUOTA		0x0100
    296  1.36.10.2     skrll #define EXT2F_ROCOMPAT_BIGALLOC		0x0200
    297  1.36.10.2     skrll #define EXT2F_ROCOMPAT_METADATA_CKSUM	0x0400
    298  1.36.10.2     skrll #define EXT2F_ROCOMPAT_READONLY		0x1000
    299  1.36.10.2     skrll #define EXT2F_ROCOMPAT_PROJECT		0x2000
    300       1.30  christos #define	EXT2F_ROCOMPAT_BITS \
    301       1.30  christos 	"\20" \
    302  1.36.10.2     skrll 	"\16ROCOMPAT_PROJECT" \
    303  1.36.10.2     skrll 	"\15ROCOMPAT_READONLY" \
    304  1.36.10.2     skrll 	"\14" \
    305  1.36.10.2     skrll 	"\13ROCOMPAT_METADATA_CKSUM" \
    306  1.36.10.2     skrll 	"\12ROCOMPAT_BIGALLOC" \
    307  1.36.10.2     skrll 	"\11ROCOMPAT_QUOTA" \
    308  1.36.10.2     skrll 	"\10" \
    309       1.32  jakllsch 	"\07ROCOMPAT_EXTRA_ISIZE" \
    310       1.32  jakllsch 	"\06ROCOMPAT_DIR_NLINK" \
    311       1.32  jakllsch 	"\05ROCOMPAT_GDT_CSUM" \
    312       1.32  jakllsch 	"\04ROCOMPAT_HUGE_FILE" \
    313       1.30  christos 	"\03ROCOMPAT_BTREE_DIR" \
    314       1.30  christos 	"\02ROCOMPAT_LARGEFILE" \
    315       1.31  jakllsch 	"\01ROCOMPAT_SPARSESUPER"
    316        1.9    bouyer 
    317        1.9    bouyer #define EXT2F_INCOMPAT_COMP		0x0001
    318        1.9    bouyer #define EXT2F_INCOMPAT_FTYPE		0x0002
    319       1.30  christos #define	EXT2F_INCOMPAT_REPLAY_JOURNAL	0x0004
    320       1.30  christos #define	EXT2F_INCOMPAT_USES_JOURNAL	0x0008
    321       1.32  jakllsch #define EXT2F_INCOMPAT_META_BG		0x0010
    322       1.32  jakllsch #define EXT2F_INCOMPAT_EXTENTS		0x0040
    323       1.32  jakllsch #define EXT2F_INCOMPAT_64BIT		0x0080
    324       1.32  jakllsch #define EXT2F_INCOMPAT_MMP		0x0100
    325       1.32  jakllsch #define EXT2F_INCOMPAT_FLEX_BG		0x0200
    326  1.36.10.2     skrll #define EXT2F_INCOMPAT_EA_INODE		0x0400
    327  1.36.10.2     skrll #define EXT2F_INCOMPAT_DIRDATA		0x1000
    328  1.36.10.2     skrll #define EXT2F_INCOMPAT_CSUM_SEED	0x2000
    329  1.36.10.2     skrll #define EXT2F_INCOMPAT_LARGEDIR		0x4000
    330  1.36.10.2     skrll #define EXT2F_INCOMPAT_INLINE_DATA	0x8000
    331  1.36.10.2     skrll #define EXT2F_INCOMPAT_ENCRYPT		0x10000
    332       1.30  christos #define	EXT2F_INCOMPAT_BITS \
    333       1.30  christos 	"\20" \
    334  1.36.10.2     skrll 	"\021INCOMPAT_ENCRYPT" \
    335  1.36.10.2     skrll 	"\020INCOMPAT_INLINE_DATA" \
    336  1.36.10.2     skrll 	"\017INCOMPAT_LARGEDIR" \
    337  1.36.10.2     skrll 	"\016INCOMPAT_CSUM_SEED" \
    338  1.36.10.2     skrll 	"\015INCOMPAT_DIRDATA" \
    339  1.36.10.2     skrll 	"\014" \
    340  1.36.10.2     skrll 	"\013INCOMPAT_EA_INODE" \
    341       1.32  jakllsch 	"\012INCOMPAT_FLEX_BG" \
    342       1.32  jakllsch 	"\011INCOMPAT_MMP" \
    343       1.32  jakllsch 	"\010INCOMPAT_64BIT" \
    344       1.32  jakllsch 	"\07INCOMPAT_EXTENTS" \
    345       1.32  jakllsch 	"\05INCOMPAT_META_BG" \
    346       1.30  christos 	"\04INCOMPAT_USES_JOURNAL" \
    347       1.30  christos 	"\03INCOMPAT_REPLAY_JOURNAL" \
    348       1.30  christos 	"\02INCOMPAT_FTYPE" \
    349       1.30  christos 	"\01INCOMPAT_COMP"
    350        1.9    bouyer 
    351       1.23   tsutsui /*
    352       1.23   tsutsui  * Features supported in this implementation
    353       1.23   tsutsui  *
    354       1.23   tsutsui  * We support the following REV1 features:
    355       1.23   tsutsui  * - EXT2F_ROCOMPAT_SPARSESUPER
    356       1.23   tsutsui  *    superblock backups stored only in cg_has_sb(bno) groups
    357       1.23   tsutsui  * - EXT2F_ROCOMPAT_LARGEFILE
    358  1.36.10.2     skrll  *    use e2di_size_high in struct ext2fs_dinode to store
    359       1.23   tsutsui  *    upper 32bit of size for >2GB files
    360       1.23   tsutsui  * - EXT2F_INCOMPAT_FTYPE
    361       1.23   tsutsui  *    store file type to e2d_type in struct ext2fs_direct
    362       1.23   tsutsui  *    (on REV0 e2d_namlen is uint16_t and no e2d_type, like ffs)
    363       1.23   tsutsui  */
    364        1.9    bouyer #define EXT2F_COMPAT_SUPP		0x0000
    365       1.16        ws #define EXT2F_ROCOMPAT_SUPP		(EXT2F_ROCOMPAT_SPARSESUPER \
    366       1.33  jakllsch 					 | EXT2F_ROCOMPAT_LARGEFILE \
    367  1.36.10.2     skrll 					 | EXT2F_ROCOMPAT_HUGE_FILE \
    368  1.36.10.2     skrll 					 | EXT2F_ROCOMPAT_EXTRA_ISIZE \
    369  1.36.10.2     skrll 					 | EXT2F_ROCOMPAT_DIR_NLINK \
    370  1.36.10.2     skrll 					 | EXT2F_ROCOMPAT_GDT_CSUM)
    371  1.36.10.1     skrll #define EXT2F_INCOMPAT_SUPP		(EXT2F_INCOMPAT_FTYPE \
    372  1.36.10.2     skrll 					 | EXT2F_INCOMPAT_EXTENTS \
    373  1.36.10.2     skrll 					 | EXT2F_INCOMPAT_FLEX_BG)
    374  1.36.10.1     skrll 
    375  1.36.10.1     skrll /*
    376  1.36.10.1     skrll  * Feature set definitions
    377  1.36.10.1     skrll  */
    378  1.36.10.2     skrll #define EXT2F_HAS_COMPAT_FEATURE(fs, feature) \
    379  1.36.10.2     skrll 	((fs)->e2fs.e2fs_rev >= E2FS_REV1 && \
    380  1.36.10.2     skrll 	((fs)->e2fs.e2fs_features_compat & (feature)) != 0)
    381  1.36.10.2     skrll 
    382  1.36.10.2     skrll #define EXT2F_HAS_ROCOMPAT_FEATURE(fs, feature) \
    383  1.36.10.2     skrll 	((fs)->e2fs.e2fs_rev >= E2FS_REV1 && \
    384  1.36.10.2     skrll 	((fs)->e2fs.e2fs_features_rocompat & (feature)) != 0)
    385  1.36.10.2     skrll 
    386  1.36.10.2     skrll #define EXT2F_HAS_INCOMPAT_FEATURE(fs, feature) \
    387  1.36.10.2     skrll 	((fs)->e2fs.e2fs_rev >= E2FS_REV1 && \
    388  1.36.10.2     skrll 	((fs)->e2fs.e2fs_features_incompat & (feature)) != 0)
    389  1.36.10.2     skrll 
    390        1.1    bouyer 
    391        1.1    bouyer /*
    392       1.23   tsutsui  * Definitions of behavior on errors
    393       1.23   tsutsui  */
    394       1.23   tsutsui #define E2FS_BEH_CONTINUE	1	/* continue operation */
    395       1.23   tsutsui #define E2FS_BEH_READONLY	2	/* remount fs read only */
    396       1.23   tsutsui #define E2FS_BEH_PANIC		3	/* cause panic */
    397       1.23   tsutsui #define E2FS_BEH_DEFAULT	E2FS_BEH_CONTINUE
    398       1.23   tsutsui 
    399       1.23   tsutsui /*
    400        1.1    bouyer  * OS identification
    401        1.1    bouyer  */
    402       1.23   tsutsui #define E2FS_OS_LINUX	0
    403       1.23   tsutsui #define E2FS_OS_HURD	1
    404       1.23   tsutsui #define E2FS_OS_MASIX	2
    405       1.23   tsutsui #define E2FS_OS_FREEBSD	3
    406       1.23   tsutsui #define E2FS_OS_LITES	4
    407        1.1    bouyer 
    408        1.1    bouyer /*
    409        1.1    bouyer  * Filesystem clean flags
    410        1.1    bouyer  */
    411        1.1    bouyer #define	E2FS_ISCLEAN	0x01
    412        1.9    bouyer #define	E2FS_ERRORS	0x02
    413        1.1    bouyer 
    414        1.1    bouyer /* ext2 file system block group descriptor */
    415        1.1    bouyer 
    416        1.1    bouyer struct ext2_gd {
    417       1.27   tsutsui 	uint32_t ext2bgd_b_bitmap;	/* blocks bitmap block */
    418       1.27   tsutsui 	uint32_t ext2bgd_i_bitmap;	/* inodes bitmap block */
    419  1.36.10.2     skrll 	uint32_t ext2bgd_i_tables;	/* first inodes table block */
    420       1.27   tsutsui 	uint16_t ext2bgd_nbfree;	/* number of free blocks */
    421       1.27   tsutsui 	uint16_t ext2bgd_nifree;	/* number of free inodes */
    422       1.27   tsutsui 	uint16_t ext2bgd_ndirs;		/* number of directories */
    423  1.36.10.2     skrll 
    424  1.36.10.2     skrll 	/*
    425  1.36.10.2     skrll 	 * Following only valid when either GDT_CSUM (AKA uninit_bg)
    426  1.36.10.2     skrll 	 * or METADATA_CKSUM feature is on
    427  1.36.10.2     skrll 	 */
    428  1.36.10.2     skrll 	uint16_t ext2bgd_flags;		/* ext4 bg flags (INODE_UNINIT, ...)*/
    429  1.36.10.2     skrll 	uint32_t ext2bgd_exclude_bitmap_lo;	/* snapshot exclude bitmap */
    430  1.36.10.2     skrll 	uint16_t ext2bgd_block_bitmap_csum_lo;	/* Low block bitmap checksum */
    431  1.36.10.2     skrll 	uint16_t ext2bgd_inode_bitmap_csum_lo;	/* Low inode bitmap checksum */
    432  1.36.10.2     skrll 	uint16_t ext2bgd_itable_unused_lo;	/* Low unused inode offset */
    433  1.36.10.2     skrll 	uint16_t ext2bgd_checksum;		/* Group desc checksum */
    434  1.36.10.2     skrll 
    435  1.36.10.2     skrll 	/*
    436  1.36.10.2     skrll 	 * XXX disk32 Further fields only exist if 64BIT feature is on
    437  1.36.10.2     skrll 	 * and superblock desc_size > 32, not supported for now.
    438  1.36.10.2     skrll 	 */
    439        1.1    bouyer };
    440       1.10    bouyer 
    441  1.36.10.2     skrll #define E2FS_BG_INODE_UNINIT	0x0001	/* Inode bitmap not used/initialized */
    442  1.36.10.2     skrll #define E2FS_BG_BLOCK_UNINIT	0x0002	/* Block bitmap not used/initialized */
    443  1.36.10.2     skrll #define E2FS_BG_INODE_ZEROED	0x0004	/* On-disk inode table initialized */
    444  1.36.10.2     skrll 
    445  1.36.10.2     skrll #define E2FS_HAS_GD_CSUM(fs) \
    446  1.36.10.2     skrll 	EXT2F_HAS_ROCOMPAT_FEATURE(fs, EXT2F_ROCOMPAT_GDT_CSUM|EXT2F_ROCOMPAT_METADATA_CKSUM) != 0
    447       1.10    bouyer 
    448       1.10    bouyer /*
    449       1.10    bouyer  * If the EXT2F_ROCOMPAT_SPARSESUPER flag is set, the cylinder group has a
    450       1.10    bouyer  * copy of the super and cylinder group descriptors blocks only if it's
    451       1.23   tsutsui  * 1, a power of 3, 5 or 7
    452       1.10    bouyer  */
    453       1.10    bouyer 
    454       1.26     perry static __inline int cg_has_sb(int) __unused;
    455       1.22     perry static __inline int
    456       1.25   tsutsui cg_has_sb(int i)
    457       1.10    bouyer {
    458       1.25   tsutsui 	int a3, a5, a7;
    459       1.10    bouyer 
    460       1.10    bouyer 	if (i == 0 || i == 1)
    461       1.10    bouyer 		return 1;
    462       1.10    bouyer 	for (a3 = 3, a5 = 5, a7 = 7;
    463       1.10    bouyer 	    a3 <= i || a5 <= i || a7 <= i;
    464       1.10    bouyer 	    a3 *= 3, a5 *= 5, a7 *= 7)
    465       1.10    bouyer 		if (i == a3 || i == a5 || i == a7)
    466       1.10    bouyer 			return 1;
    467       1.10    bouyer 	return 0;
    468       1.10    bouyer }
    469        1.2    bouyer 
    470        1.2    bouyer /* EXT2FS metadatas are stored in little-endian byte order. These macros
    471        1.2    bouyer  * helps reading theses metadatas
    472        1.2    bouyer  */
    473        1.2    bouyer 
    474        1.2    bouyer #if BYTE_ORDER == LITTLE_ENDIAN
    475        1.2    bouyer #	define h2fs16(x) (x)
    476        1.2    bouyer #	define h2fs32(x) (x)
    477       1.12      fvdl #	define h2fs64(x) (x)
    478        1.2    bouyer #	define fs2h16(x) (x)
    479        1.2    bouyer #	define fs2h32(x) (x)
    480       1.12      fvdl #	define fs2h64(x) (x)
    481  1.36.10.2     skrll #	define e2fs_sbload(old, new) memcpy((new), (old), SBSIZE)
    482  1.36.10.2     skrll #	define e2fs_sbsave(old, new) memcpy((new), (old), SBSIZE)
    483        1.2    bouyer #else
    484       1.18   xtraeme void e2fs_sb_bswap(struct ext2fs *, struct ext2fs *);
    485        1.2    bouyer #	define h2fs16(x) bswap16(x)
    486        1.2    bouyer #	define h2fs32(x) bswap32(x)
    487       1.12      fvdl #	define h2fs64(x) bswap64(x)
    488        1.2    bouyer #	define fs2h16(x) bswap16(x)
    489        1.2    bouyer #	define fs2h32(x) bswap32(x)
    490       1.12      fvdl #	define fs2h64(x) bswap64(x)
    491        1.2    bouyer #	define e2fs_sbload(old, new) e2fs_sb_bswap((old), (new))
    492        1.2    bouyer #	define e2fs_sbsave(old, new) e2fs_sb_bswap((old), (new))
    493        1.2    bouyer #endif
    494        1.1    bouyer 
    495  1.36.10.2     skrll /* Group descriptors are not byte swapped */
    496  1.36.10.2     skrll #define e2fs_cgload(old, new, size) memcpy((new), (old), (size))
    497  1.36.10.2     skrll #define e2fs_cgsave(old, new, size) memcpy((new), (old), (size))
    498  1.36.10.2     skrll 
    499        1.1    bouyer /*
    500        1.1    bouyer  * Turn file system block numbers into disk block addresses.
    501        1.1    bouyer  * This maps file system blocks to device size blocks.
    502        1.1    bouyer  */
    503       1.35  dholland #define EXT2_FSBTODB(fs, b)	((b) << (fs)->e2fs_fsbtodb)
    504       1.35  dholland #define EXT2_DBTOFSB(fs, b)	((b) >> (fs)->e2fs_fsbtodb)
    505        1.1    bouyer 
    506        1.1    bouyer /*
    507        1.1    bouyer  * Macros for handling inode numbers:
    508        1.1    bouyer  *	 inode number to file system block offset.
    509        1.1    bouyer  *	 inode number to cylinder group number.
    510        1.1    bouyer  *	 inode number to file system block address.
    511        1.1    bouyer  */
    512        1.1    bouyer #define	ino_to_cg(fs, x)	(((x) - 1) / (fs)->e2fs.e2fs_ipg)
    513        1.1    bouyer #define	ino_to_fsba(fs, x)						\
    514  1.36.10.2     skrll 	(fs2h32((fs)->e2fs_gd[ino_to_cg((fs), (x))].ext2bgd_i_tables) +	\
    515       1.25   tsutsui 	(((x) - 1) % (fs)->e2fs.e2fs_ipg) / (fs)->e2fs_ipb)
    516       1.25   tsutsui #define	ino_to_fsbo(fs, x)	(((x) - 1) % (fs)->e2fs_ipb)
    517        1.1    bouyer 
    518        1.1    bouyer /*
    519        1.1    bouyer  * Give cylinder group number for a file system block.
    520        1.1    bouyer  * Give cylinder group block number for a file system block.
    521        1.1    bouyer  */
    522        1.1    bouyer #define	dtog(fs, d) (((d) - (fs)->e2fs.e2fs_first_dblock) / (fs)->e2fs.e2fs_fpg)
    523        1.1    bouyer #define	dtogd(fs, d) \
    524        1.1    bouyer 	(((d) - (fs)->e2fs.e2fs_first_dblock) % (fs)->e2fs.e2fs_fpg)
    525        1.1    bouyer 
    526        1.1    bouyer /*
    527        1.1    bouyer  * The following macros optimize certain frequently calculated
    528        1.1    bouyer  * quantities by using shifts and masks in place of divisions
    529        1.1    bouyer  * modulos and multiplications.
    530        1.1    bouyer  */
    531       1.34  dholland #define ext2_blkoff(fs, loc)	/* calculates (loc % fs->e2fs_bsize) */ \
    532        1.1    bouyer 	((loc) & (fs)->e2fs_qbmask)
    533       1.36  dholland #define ext2_lblktosize(fs, blk) /* calculates (blk * fs->e2fs_bsize) */ \
    534        1.1    bouyer 	((blk) << (fs)->e2fs_bshift)
    535       1.36  dholland #define ext2_lblkno(fs, loc)	/* calculates (loc / fs->e2fs_bsize) */ \
    536        1.1    bouyer 	((loc) >> (fs)->e2fs_bshift)
    537       1.36  dholland #define ext2_blkroundup(fs, size) /* calculates roundup(size, fs->e2fs_bsize) */ \
    538        1.1    bouyer 	(((size) + (fs)->e2fs_qbmask) & (fs)->e2fs_bmask)
    539       1.36  dholland #define ext2_fragroundup(fs, size) /* calculates roundup(size, fs->e2fs_bsize) */ \
    540        1.1    bouyer 	(((size) + (fs)->e2fs_qbmask) & (fs)->e2fs_bmask)
    541       1.17     perry /*
    542        1.1    bouyer  * Determine the number of available frags given a
    543        1.1    bouyer  * percentage to hold in reserve.
    544       1.17     perry  */
    545        1.1    bouyer #define freespace(fs) \
    546       1.17     perry    ((fs)->e2fs.e2fs_fbcount - (fs)->e2fs.e2fs_rbcount)
    547        1.1    bouyer 
    548        1.1    bouyer /*
    549        1.1    bouyer  * Number of indirects in a file system block.
    550        1.1    bouyer  */
    551       1.34  dholland #define	EXT2_NINDIR(fs)	((fs)->e2fs_bsize / sizeof(uint32_t))
    552       1.11      matt 
    553       1.11      matt #endif /* !_UFS_EXT2FS_EXT2FS_H_ */
    554