ext2fs_dinode.h revision 1.37 1 1.37 christos /* $NetBSD: ext2fs_dinode.h,v 1.37 2017/01/13 18:04:36 christos Exp $ */
2 1.1 bouyer
3 1.1 bouyer /*
4 1.1 bouyer * Copyright (c) 1982, 1989, 1993
5 1.1 bouyer * The Regents of the University of California. All rights reserved.
6 1.1 bouyer * (c) UNIX System Laboratories, Inc.
7 1.1 bouyer * All or some portions of this file are derived from material licensed
8 1.1 bouyer * to the University of California by American Telephone and Telegraph
9 1.1 bouyer * Co. or Unix System Laboratories, Inc. and are reproduced herein with
10 1.1 bouyer * the permission of UNIX System Laboratories, Inc.
11 1.9 agc *
12 1.9 agc * Redistribution and use in source and binary forms, with or without
13 1.9 agc * modification, are permitted provided that the following conditions
14 1.9 agc * are met:
15 1.9 agc * 1. Redistributions of source code must retain the above copyright
16 1.9 agc * notice, this list of conditions and the following disclaimer.
17 1.9 agc * 2. Redistributions in binary form must reproduce the above copyright
18 1.9 agc * notice, this list of conditions and the following disclaimer in the
19 1.9 agc * documentation and/or other materials provided with the distribution.
20 1.9 agc * 3. Neither the name of the University nor the names of its contributors
21 1.9 agc * may be used to endorse or promote products derived from this software
22 1.9 agc * without specific prior written permission.
23 1.9 agc *
24 1.9 agc * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
25 1.9 agc * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26 1.9 agc * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27 1.9 agc * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
28 1.9 agc * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
29 1.9 agc * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
30 1.9 agc * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
31 1.9 agc * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
32 1.9 agc * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
33 1.9 agc * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
34 1.9 agc * SUCH DAMAGE.
35 1.9 agc *
36 1.9 agc * @(#)dinode.h 8.6 (Berkeley) 9/13/94
37 1.9 agc * Modified for ext2fs by Manuel Bouyer.
38 1.9 agc */
39 1.9 agc
40 1.9 agc /*
41 1.9 agc * Copyright (c) 1997 Manuel Bouyer.
42 1.1 bouyer *
43 1.1 bouyer * Redistribution and use in source and binary forms, with or without
44 1.1 bouyer * modification, are permitted provided that the following conditions
45 1.1 bouyer * are met:
46 1.1 bouyer * 1. Redistributions of source code must retain the above copyright
47 1.4 christos * notice, this list of conditions and the following disclaimer.
48 1.1 bouyer * 2. Redistributions in binary form must reproduce the above copyright
49 1.4 christos * notice, this list of conditions and the following disclaimer in the
50 1.4 christos * documentation and/or other materials provided with the distribution.
51 1.1 bouyer *
52 1.11 bouyer * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
53 1.11 bouyer * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
54 1.11 bouyer * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
55 1.11 bouyer * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
56 1.11 bouyer * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
57 1.11 bouyer * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
58 1.11 bouyer * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
59 1.11 bouyer * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
60 1.11 bouyer * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
61 1.11 bouyer * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
62 1.1 bouyer *
63 1.1 bouyer * @(#)dinode.h 8.6 (Berkeley) 9/13/94
64 1.1 bouyer * Modified for ext2fs by Manuel Bouyer.
65 1.1 bouyer */
66 1.1 bouyer
67 1.7 matt #ifndef _UFS_EXT2FS_EXT2FS_DINODE_H_
68 1.7 matt #define _UFS_EXT2FS_EXT2FS_DINODE_H_
69 1.7 matt
70 1.31 nonaka #if !defined(_KERNEL) && !defined(_STANDALONE)
71 1.31 nonaka #include <stddef.h> /* for offsetof */
72 1.31 nonaka #endif
73 1.31 nonaka
74 1.1 bouyer #include <sys/stat.h>
75 1.1 bouyer
76 1.1 bouyer /*
77 1.1 bouyer * The root inode is the root of the file system. Inode 0 can't be used for
78 1.1 bouyer * normal purposes and bad blocks are normally linked to inode 1, thus
79 1.1 bouyer * the root inode is 2.
80 1.1 bouyer * Inode 3 to 10 are reserved in ext2fs.
81 1.1 bouyer */
82 1.22 tsutsui #define EXT2_BADBLKINO ((ino_t)1)
83 1.22 tsutsui #define EXT2_ROOTINO ((ino_t)2)
84 1.22 tsutsui #define EXT2_ACLIDXINO ((ino_t)3)
85 1.22 tsutsui #define EXT2_ACLDATAINO ((ino_t)4)
86 1.22 tsutsui #define EXT2_BOOTLOADERINO ((ino_t)5)
87 1.22 tsutsui #define EXT2_UNDELDIRINO ((ino_t)6)
88 1.22 tsutsui #define EXT2_RESIZEINO ((ino_t)7)
89 1.22 tsutsui #define EXT2_JOURNALINO ((ino_t)8)
90 1.22 tsutsui #define EXT2_FIRSTINO ((ino_t)11)
91 1.1 bouyer
92 1.1 bouyer /*
93 1.1 bouyer * A dinode contains all the meta-data associated with a UFS file.
94 1.1 bouyer * This structure defines the on-disk format of a dinode. Since
95 1.1 bouyer * this structure describes an on-disk structure, all its fields
96 1.1 bouyer * are defined by types with precise widths.
97 1.1 bouyer */
98 1.1 bouyer
99 1.26 dholland /*
100 1.26 dholland * XXX these are the same values as UFS_NDADDR/UFS_NIADDR and it is
101 1.26 dholland * far from clear that there isn't code that relies on them being the
102 1.26 dholland * same.
103 1.26 dholland */
104 1.26 dholland #define EXT2FS_NDADDR 12 /* Direct addresses in inode. */
105 1.26 dholland #define EXT2FS_NIADDR 3 /* Indirect addresses in inode. */
106 1.1 bouyer
107 1.26 dholland #define EXT2_MAXSYMLINKLEN ((EXT2FS_NDADDR+EXT2FS_NIADDR) * sizeof (uint32_t))
108 1.34 jdolecek #define E2MAXSYMLINKLEN EXT2_MAXSYMLINKLEN
109 1.1 bouyer
110 1.1 bouyer struct ext2fs_dinode {
111 1.20 tsutsui uint16_t e2di_mode; /* 0: IFMT, permissions; see below. */
112 1.20 tsutsui uint16_t e2di_uid; /* 2: Owner UID */
113 1.23 jakllsch uint32_t e2di_size; /* 4: Size (in bytes) */
114 1.23 jakllsch uint32_t e2di_atime; /* 8: Access time */
115 1.23 jakllsch uint32_t e2di_ctime; /* 12: Create time */
116 1.23 jakllsch uint32_t e2di_mtime; /* 16: Modification time */
117 1.23 jakllsch uint32_t e2di_dtime; /* 20: Deletion time */
118 1.20 tsutsui uint16_t e2di_gid; /* 24: Owner GID */
119 1.20 tsutsui uint16_t e2di_nlink; /* 26: File link count */
120 1.20 tsutsui uint32_t e2di_nblock; /* 28: Blocks count */
121 1.20 tsutsui uint32_t e2di_flags; /* 32: Status flags (chflags) */
122 1.24 jakllsch uint32_t e2di_version; /* 36: was reserved1 */
123 1.26 dholland uint32_t e2di_blocks[EXT2FS_NDADDR+EXT2FS_NIADDR];
124 1.26 dholland /* 40: disk blocks */
125 1.20 tsutsui uint32_t e2di_gen; /* 100: generation number */
126 1.36 jdolecek uint32_t e2di_facl; /* 104: file ACL (ext3) */
127 1.32 jdolecek uint32_t e2di_size_high; /* 108: Size (in bytes) high */
128 1.27 jdolecek uint32_t e2di_obso_faddr;/* 112: obsolete fragment address (ext2) */
129 1.27 jdolecek uint16_t e2di_nblock_high; /* 116: Blocks count bits 47:32 (ext4) */
130 1.36 jdolecek uint16_t e2di_facl_high; /* 118: file ACL bits 47:32 (ext4/64bit) */
131 1.27 jdolecek uint16_t e2di_uid_high; /* 120: Owner UID top 16 bits (ext4) */
132 1.27 jdolecek uint16_t e2di_gid_high; /* 122: Owner GID top 16 bits (ext4) */
133 1.28 jdolecek uint16_t e2di_checksum_low; /* 124: crc LE (not implemented) (ext4) */
134 1.28 jdolecek uint16_t e2di_reserved; /* 126: reserved */
135 1.28 jdolecek uint16_t e2di_extra_isize; /* 128: inode extra size (over 128) actually used (ext4) */
136 1.28 jdolecek uint16_t e2di_checksum_high; /* 130: crc BE (not implemented) (ext4) */
137 1.28 jdolecek uint32_t e2di_ctime_extra; /* 132: ctime (nsec << 2 | high epoch) (ext4) */
138 1.28 jdolecek uint32_t e2di_mtime_extra; /* 136: mtime (nsec << 2 | high epoch) (ext4) */
139 1.28 jdolecek uint32_t e2di_atime_extra; /* 140: atime (nsec << 2 | high epoch) (ext4) */
140 1.28 jdolecek uint32_t e2di_crtime; /* 144: creation time (epoch) (ext4) */
141 1.28 jdolecek uint32_t e2di_crtime_extra; /* 148: creation time (nsec << 2 | high epoch) (ext4) */
142 1.28 jdolecek uint32_t e2di_version_high; /* 152: version high (ext4) */
143 1.28 jdolecek uint32_t e2di_projid; /* 156: project id (not implemented) (ext4) */
144 1.1 bouyer };
145 1.1 bouyer
146 1.33 jdolecek #define i_e2fs_mode i_din.e2fs_din->e2di_mode
147 1.33 jdolecek #define i_e2fs_uid i_din.e2fs_din->e2di_uid
148 1.33 jdolecek #define i_e2fs_size i_din.e2fs_din->e2di_size
149 1.33 jdolecek #define i_e2fs_atime i_din.e2fs_din->e2di_atime
150 1.33 jdolecek #define i_e2fs_ctime i_din.e2fs_din->e2di_ctime
151 1.33 jdolecek #define i_e2fs_mtime i_din.e2fs_din->e2di_mtime
152 1.33 jdolecek #define i_e2fs_dtime i_din.e2fs_din->e2di_dtime
153 1.33 jdolecek #define i_e2fs_gid i_din.e2fs_din->e2di_gid
154 1.33 jdolecek #define i_e2fs_nlink i_din.e2fs_din->e2di_nlink
155 1.33 jdolecek #define i_e2fs_nblock i_din.e2fs_din->e2di_nblock
156 1.33 jdolecek #define i_e2fs_flags i_din.e2fs_din->e2di_flags
157 1.33 jdolecek #define i_e2fs_version i_din.e2fs_din->e2di_version
158 1.33 jdolecek #define i_e2fs_blocks i_din.e2fs_din->e2di_blocks
159 1.33 jdolecek #define i_e2fs_rdev i_din.e2fs_din->e2di_rdev
160 1.33 jdolecek #define i_e2fs_gen i_din.e2fs_din->e2di_gen
161 1.33 jdolecek #define i_e2fs_facl i_din.e2fs_din->e2di_facl
162 1.33 jdolecek #define i_e2fs_nblock_high i_din.e2fs_din->e2di_nblock_high
163 1.33 jdolecek #define i_e2fs_facl_high i_din.e2fs_din->e2di_facl_high
164 1.33 jdolecek #define i_e2fs_uid_high i_din.e2fs_din->e2di_uid_high
165 1.33 jdolecek #define i_e2fs_gid_high i_din.e2fs_din->e2di_gid_high
166 1.33 jdolecek
167 1.1 bouyer /* File permissions. */
168 1.1 bouyer #define EXT2_IEXEC 0000100 /* Executable. */
169 1.8 wiz #define EXT2_IWRITE 0000200 /* Writable. */
170 1.1 bouyer #define EXT2_IREAD 0000400 /* Readable. */
171 1.1 bouyer #define EXT2_ISVTX 0001000 /* Sticky bit. */
172 1.1 bouyer #define EXT2_ISGID 0002000 /* Set-gid. */
173 1.1 bouyer #define EXT2_ISUID 0004000 /* Set-uid. */
174 1.1 bouyer
175 1.1 bouyer /* File types. */
176 1.1 bouyer #define EXT2_IFMT 0170000 /* Mask of file type. */
177 1.1 bouyer #define EXT2_IFIFO 0010000 /* Named pipe (fifo). */
178 1.1 bouyer #define EXT2_IFCHR 0020000 /* Character device. */
179 1.1 bouyer #define EXT2_IFDIR 0040000 /* Directory file. */
180 1.1 bouyer #define EXT2_IFBLK 0060000 /* Block device. */
181 1.1 bouyer #define EXT2_IFREG 0100000 /* Regular file. */
182 1.1 bouyer #define EXT2_IFLNK 0120000 /* Symbolic link. */
183 1.1 bouyer #define EXT2_IFSOCK 0140000 /* UNIX domain socket. */
184 1.1 bouyer
185 1.1 bouyer /* file flags */
186 1.25 jakllsch #define EXT2_SECRM 0x00000001 /* Secure deletion */
187 1.25 jakllsch #define EXT2_UNRM 0x00000002 /* Undelete */
188 1.25 jakllsch #define EXT2_COMPR 0x00000004 /* Compress file */
189 1.25 jakllsch #define EXT2_SYNC 0x00000008 /* Synchronous updates */
190 1.25 jakllsch #define EXT2_IMMUTABLE 0x00000010 /* Immutable file */
191 1.16 tsutsui #define EXT2_APPEND 0x00000020 /* writes to file may only append */
192 1.25 jakllsch #define EXT2_NODUMP 0x00000040 /* do not dump file */
193 1.25 jakllsch #define EXT2_NOATIME 0x00000080 /* do not update atime */
194 1.25 jakllsch #define EXT2_INDEX 0x00001000 /* hash-indexed directory */
195 1.25 jakllsch #define EXT2_IMAGIC 0x00002000 /* AFS directory */
196 1.25 jakllsch #define EXT2_JOURNAL_DATA 0x00004000 /* file data should be journaled */
197 1.25 jakllsch #define EXT2_NOTAIL 0x00008000 /* file tail should not be merged */
198 1.25 jakllsch #define EXT2_DIRSYNC 0x00010000 /* dirsync behaviour */
199 1.25 jakllsch #define EXT2_TOPDIR 0x00020000 /* Top of directory hierarchies*/
200 1.25 jakllsch #define EXT2_HUGE_FILE 0x00040000 /* Set to each huge file */
201 1.25 jakllsch #define EXT2_EXTENTS 0x00080000 /* Inode uses extents */
202 1.35 jdolecek #define EXT2_EA_INODE 0x00200000 /* Inode used for large EA */
203 1.25 jakllsch #define EXT2_EOFBLOCKS 0x00400000 /* Blocks allocated beyond EOF */
204 1.35 jdolecek #define EXT2_INLINE_DATA 0x10000000 /* Inode has inline data */
205 1.35 jdolecek #define EXT2_PROJINHERIT 0x20000000 /* Children inherit project ID */
206 1.5 thorpej
207 1.5 thorpej /* Size of on-disk inode. */
208 1.37 christos #define EXT2_REV0_DINODE_SIZE 128U
209 1.19 tsutsui #define EXT2_DINODE_SIZE(fs) ((fs)->e2fs.e2fs_rev > E2FS_REV0 ? \
210 1.19 tsutsui (fs)->e2fs.e2fs_inode_size : \
211 1.19 tsutsui EXT2_REV0_DINODE_SIZE)
212 1.28 jdolecek #define EXT2_DINODE_FITS(dinode, field, isize) (\
213 1.28 jdolecek (isize > EXT2_REV0_DINODE_SIZE) \
214 1.28 jdolecek && ((EXT2_REV0_DINODE_SIZE + (dinode)->e2di_extra_isize) >= offsetof(struct ext2fs_dinode, field) + sizeof((dinode)->field)) \
215 1.28 jdolecek )
216 1.1 bouyer
217 1.1 bouyer /*
218 1.29 jdolecek * Time encoding
219 1.29 jdolecek * Lower two bits of extra field are extra high bits for epoch; unfortunately still, Linux kernels treat 11 there as 00 for compatibility
220 1.29 jdolecek * Rest of extra fields are nanoseconds
221 1.29 jdolecek */
222 1.29 jdolecek static __inline void
223 1.29 jdolecek ext2fs_dinode_time_get(struct timespec *ts, uint32_t epoch, uint32_t extra)
224 1.29 jdolecek {
225 1.29 jdolecek ts->tv_sec = (signed) epoch;
226 1.29 jdolecek
227 1.29 jdolecek if (extra) {
228 1.29 jdolecek uint64_t epoch_bits = extra & 0x3;
229 1.29 jdolecek /* XXX compatibility with linux kernel < 4.20 */
230 1.29 jdolecek if (epoch_bits == 3 && ts->tv_sec < 0)
231 1.29 jdolecek epoch_bits = 0;
232 1.29 jdolecek
233 1.29 jdolecek ts->tv_sec |= epoch_bits << 32;
234 1.29 jdolecek
235 1.29 jdolecek ts->tv_nsec = extra >> 2;
236 1.29 jdolecek } else {
237 1.29 jdolecek ts->tv_nsec = 0;
238 1.29 jdolecek }
239 1.29 jdolecek }
240 1.29 jdolecek #define EXT2_DINODE_TIME_GET(ts, dinode, field, isize) \
241 1.29 jdolecek ext2fs_dinode_time_get(ts, (dinode)->field, \
242 1.29 jdolecek EXT2_DINODE_FITS(dinode, field ## _extra, isize) \
243 1.29 jdolecek ? (dinode)->field ## _extra : 0 \
244 1.29 jdolecek )
245 1.29 jdolecek
246 1.29 jdolecek static __inline void
247 1.29 jdolecek ext2fs_dinode_time_set(const struct timespec *ts, uint32_t *epoch, uint32_t *extra)
248 1.29 jdolecek {
249 1.29 jdolecek *epoch = (int32_t) ts->tv_sec;
250 1.29 jdolecek
251 1.29 jdolecek if (extra) {
252 1.29 jdolecek uint32_t epoch_bits = (ts->tv_sec >> 32) & 0x3;
253 1.29 jdolecek
254 1.29 jdolecek *extra = (ts->tv_nsec << 2) | epoch_bits;
255 1.29 jdolecek }
256 1.29 jdolecek }
257 1.29 jdolecek #define EXT2_DINODE_TIME_SET(ts, dinode, field, isize) \
258 1.29 jdolecek ext2fs_dinode_time_set(ts, &(dinode)->field, \
259 1.29 jdolecek EXT2_DINODE_FITS(dinode, field ## _extra, isize) \
260 1.29 jdolecek ? &(dinode)->field ## _extra : NULL \
261 1.29 jdolecek )
262 1.29 jdolecek
263 1.29 jdolecek /*
264 1.1 bouyer * The e2di_blocks fields may be overlaid with other information for
265 1.1 bouyer * file types that do not have associated disk storage. Block
266 1.1 bouyer * and character devices overlay the first data block with their
267 1.1 bouyer * dev_t value. Short symbolic links place their path in the
268 1.1 bouyer * di_db area.
269 1.1 bouyer */
270 1.1 bouyer
271 1.1 bouyer #define e2di_rdev e2di_blocks[0]
272 1.16 tsutsui #define e2di_shortlink e2di_blocks
273 1.2 bouyer
274 1.2 bouyer /* e2fs needs byte swapping on big-endian systems */
275 1.2 bouyer #if BYTE_ORDER == LITTLE_ENDIAN
276 1.28 jdolecek # define e2fs_iload(old, new, isize) \
277 1.28 jdolecek memcpy((new),(old),(isize))
278 1.28 jdolecek # define e2fs_isave(old, new, isize) \
279 1.28 jdolecek memcpy((new),(old),(isize))
280 1.2 bouyer #else
281 1.28 jdolecek void e2fs_i_bswap(struct ext2fs_dinode *, struct ext2fs_dinode *, size_t);
282 1.30 nonaka # define e2fs_iload(old, new, isize) e2fs_i_bswap((old), (new), (isize))
283 1.30 nonaka # define e2fs_isave(old, new, isize) e2fs_i_bswap((old), (new), (isize))
284 1.2 bouyer #endif
285 1.7 matt
286 1.7 matt #endif /* !_UFS_EXT2FS_EXT2FS_DINODE_H_ */
287