t_raid.sh revision 1.13.4.1
1 #! /usr/bin/atf-sh 2 # $NetBSD: t_raid.sh,v 1.13.4.1 2020/04/13 08:05:22 martin Exp $ 3 # 4 # Copyright (c) 2010 The NetBSD Foundation, Inc. 5 # All rights reserved. 6 # 7 # Redistribution and use in source and binary forms, with or without 8 # modification, are permitted provided that the following conditions 9 # are met: 10 # 1. Redistributions of source code must retain the above copyright 11 # notice, this list of conditions and the following disclaimer. 12 # 2. Redistributions in binary form must reproduce the above copyright 13 # notice, this list of conditions and the following disclaimer in the 14 # documentation and/or other materials provided with the distribution. 15 # 16 # THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 17 # ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 18 # TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 19 # PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 20 # BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 21 # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 22 # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 23 # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 24 # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 25 # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 26 # POSSIBILITY OF SUCH DAMAGE. 27 # 28 29 rawpart=`sysctl -n kern.rawpartition | tr '01234' 'abcde'` 30 rawraid=/dev/rraid0${rawpart} 31 raidserver="rump_server -lrumpvfs -lrumpdev -lrumpdev_disk -lrumpdev_raidframe" 32 33 makecfg() 34 { 35 level=${1} 36 ncol=${2} 37 38 printf "START array\n${ncol} 0\nSTART disks\n" > raid.conf 39 diskn=0 40 while [ ${ncol} -gt ${diskn} ] ; do 41 echo "/disk${diskn}" >> raid.conf 42 diskn=$((diskn+1)) 43 done 44 45 printf "START layout\n32 1 1 ${level}\nSTART queue\nfifo 100\n" \ 46 >> raid.conf 47 } 48 49 makecfg_old() 50 { 51 level=${1} 52 ncol=${2} 53 54 printf "START array\n1 ${ncol} 0\nSTART disks\n" > raid.conf 55 diskn=0 56 while [ ${ncol} -gt ${diskn} ] ; do 57 echo "/disk${diskn}" >> raid.conf 58 diskn=$((diskn+1)) 59 done 60 61 printf "START layout\n32 1 1 ${level}\nSTART queue\nfifo 100\n" \ 62 >> raid.conf 63 } 64 65 atf_test_case smalldisk cleanup 66 smalldisk_head() 67 { 68 atf_set "descr" "Checks the raidframe works on small disks " \ 69 "(PR kern/44239)" 70 atf_set "require.progs" "rump_server" 71 } 72 73 smalldisk_body_backend() 74 { 75 export RUMP_SERVER=unix://sock 76 atf_check -s exit:0 ${raidserver} \ 77 -d key=/disk0,hostpath=disk0.img,size=1m \ 78 -d key=/disk1,hostpath=disk1.img,size=1m \ 79 ${RUMP_SERVER} 80 81 atf_check -s exit:0 rump.raidctl -C raid.conf raid0 82 } 83 84 smalldisk_body() 85 { 86 makecfg 1 2 87 smalldisk_body_backend 88 } 89 90 smalldisk_cleanup() 91 { 92 export RUMP_SERVER=unix://sock 93 rump.halt 94 } 95 96 # The old configuration test case uses the smalldisk backend 97 atf_test_case old_numrows_config cleanup 98 old_numrows_config_head() 99 { 100 atf_set "descr" "Checks the old numRows configuration works" 101 atf_set "require.progs" "rump_server" 102 } 103 104 old_numrows_config_body() 105 { 106 makecfg_old 1 2 107 smalldisk_body_backend 108 } 109 110 old_numrows_config_cleanup() 111 { 112 export RUMP_SERVER=unix://sock 113 rump.halt 114 } 115 116 export RAID_MEDIASIZE=4m 117 118 atf_test_case raid1_compfail cleanup 119 raid1_compfail_head() 120 { 121 atf_set "descr" "Checks that RAID1 works after component failure" 122 atf_set "require.progs" "rump_server" 123 } 124 125 raid1_compfail_body() 126 { 127 makecfg 1 2 128 export RUMP_SERVER=unix://sock 129 atf_check -s exit:0 ${raidserver} \ 130 -d key=/disk0,hostpath=disk0.img,size=${RAID_MEDIASIZE} \ 131 -d key=/disk1,hostpath=disk1.img,size=${RAID_MEDIASIZE} \ 132 ${RUMP_SERVER} 133 134 atf_check -s exit:0 rump.raidctl -C raid.conf raid0 135 atf_check -s exit:0 rump.raidctl -I 12345 raid0 136 atf_check -s exit:0 -o ignore rump.raidctl -iv raid0 137 138 # put some data there 139 atf_check -s exit:0 -e ignore \ 140 dd if=$(atf_get_srcdir)/t_raid of=testfile count=4 141 atf_check -s exit:0 -e ignore -x \ 142 "dd if=testfile | rump.dd of=${rawraid} conv=sync" 143 144 # restart server with failed component 145 rump.halt 146 rm disk1.img # FAIL 147 atf_check -s exit:0 ${raidserver} \ 148 -d key=/disk0,hostpath=disk0.img,size=${RAID_MEDIASIZE} \ 149 -d key=/disk1,hostpath=disk1.img,size=${RAID_MEDIASIZE} \ 150 ${RUMP_SERVER} 151 152 atf_check -s exit:0 rump.raidctl -c raid.conf raid0 153 154 # check if we we get what we wrote 155 atf_check -s exit:0 -o file:testfile -e ignore \ 156 rump.dd if=${rawraid} count=4 157 } 158 159 raid1_compfail_cleanup() 160 { 161 export RUMP_SERVER=unix://sock 162 rump.halt 163 } 164 165 166 167 atf_test_case raid1_comp0fail cleanup 168 raid1_comp0fail_head() 169 { 170 atf_set "descr" "Checks configuring RAID1 after component 0 fails" \ 171 "(PR kern/44251)" 172 atf_set "require.progs" "rump_server" 173 } 174 175 raid1_comp0fail_body() 176 { 177 makecfg 1 2 178 export RUMP_SERVER=unix://sock 179 atf_check -s exit:0 ${raidserver} \ 180 -d key=/disk0,hostpath=disk0.img,size=${RAID_MEDIASIZE} \ 181 -d key=/disk1,hostpath=disk1.img,size=${RAID_MEDIASIZE} \ 182 ${RUMP_SERVER} 183 184 atf_check -s exit:0 rump.raidctl -C raid.conf raid0 185 atf_check -s exit:0 rump.raidctl -I 12345 raid0 186 atf_check -s exit:0 -o ignore rump.raidctl -iv raid0 187 188 # restart server with failed component 189 rump.halt 190 rm disk0.img # FAIL 191 atf_check -s exit:0 ${raidserver} \ 192 -d key=/disk0,hostpath=disk0.img,size=${RAID_MEDIASIZE} \ 193 -d key=/disk1,hostpath=disk1.img,size=${RAID_MEDIASIZE} \ 194 ${RUMP_SERVER} 195 196 atf_check -s exit:0 rump.raidctl -c raid.conf raid0 197 } 198 199 raid1_comp0fail_cleanup() 200 { 201 export RUMP_SERVER=unix://sock 202 rump.halt 203 } 204 205 atf_test_case raid1_normal cleanup 206 raid1_normal_head() 207 { 208 atf_set "descr" "Checks that RAID1 -c configurations work " \ 209 "in the normal case" 210 atf_set "require.progs" "rump_server" 211 } 212 213 raid1_normal_body() 214 { 215 makecfg 1 2 216 export RUMP_SERVER=unix://sock 217 atf_check -s exit:0 ${raidserver} \ 218 -d key=/disk0,hostpath=disk0.img,size=${RAID_MEDIASIZE} \ 219 -d key=/disk1,hostpath=disk1.img,size=${RAID_MEDIASIZE} \ 220 ${RUMP_SERVER} 221 222 atf_check -s exit:0 rump.raidctl -C raid.conf raid0 223 atf_check -s exit:0 rump.raidctl -I 12345 raid0 224 atf_check -s exit:0 -o ignore rump.raidctl -iv raid0 225 226 # put some data there 227 atf_check -s exit:0 -e ignore \ 228 dd if=$(atf_get_srcdir)/t_raid of=testfile count=4 229 atf_check -s exit:0 -e ignore -x \ 230 "dd if=testfile | rump.dd of=${rawraid} conv=sync" 231 232 # restart server, disks remain normal 233 rump.halt 234 235 atf_check -s exit:0 ${raidserver} \ 236 -d key=/disk0,hostpath=disk0.img,size=${RAID_MEDIASIZE} \ 237 -d key=/disk1,hostpath=disk1.img,size=${RAID_MEDIASIZE} \ 238 ${RUMP_SERVER} 239 240 atf_check -s exit:0 rump.raidctl -c raid.conf raid0 241 242 # check if we we get what we wrote 243 atf_check -s exit:0 -o file:testfile -e ignore \ 244 rump.dd if=${rawraid} count=4 245 246 } 247 248 raid1_normal_cleanup() 249 { 250 export RUMP_SERVER=unix://sock 251 rump.halt 252 } 253 254 255 atf_test_case raid5_compfail cleanup 256 raid5_compfail_head() 257 { 258 atf_set "descr" "Checks that RAID5 works after component failure" 259 atf_set "require.progs" "rump_server" 260 } 261 262 raid5_compfail_body() 263 { 264 makecfg 5 3 265 export RUMP_SERVER=unix://sock 266 atf_check -s exit:0 ${raidserver} \ 267 -d key=/disk0,hostpath=disk0.img,size=${RAID_MEDIASIZE} \ 268 -d key=/disk1,hostpath=disk1.img,size=${RAID_MEDIASIZE} \ 269 -d key=/disk2,hostpath=disk2.img,size=${RAID_MEDIASIZE} \ 270 ${RUMP_SERVER} 271 272 atf_check -s exit:0 rump.raidctl -C raid.conf raid0 273 atf_check -s exit:0 rump.raidctl -I 12345 raid0 274 atf_check -s exit:0 -o ignore rump.raidctl -iv raid0 275 276 # put some data there 277 atf_check -s exit:0 -e ignore \ 278 dd if=$(atf_get_srcdir)/t_raid of=testfile count=4 279 atf_check -s exit:0 -e ignore -x \ 280 "dd if=testfile | rump.dd of=${rawraid} conv=sync" 281 282 # restart server with failed component 283 rump.halt 284 rm disk2.img # FAIL 285 atf_check -s exit:0 ${raidserver} \ 286 -d key=/disk0,hostpath=disk0.img,size=${RAID_MEDIASIZE} \ 287 -d key=/disk1,hostpath=disk1.img,size=${RAID_MEDIASIZE} \ 288 -d key=/disk2,hostpath=disk2.img,size=${RAID_MEDIASIZE} \ 289 ${RUMP_SERVER} 290 291 atf_check -s exit:0 rump.raidctl -c raid.conf raid0 292 293 # check if we we get what we wrote 294 atf_check -s exit:0 -o file:testfile -e ignore \ 295 rump.dd if=${rawraid} count=4 296 } 297 298 raid5_compfail_cleanup() 299 { 300 export RUMP_SERVER=unix://sock 301 rump.halt 302 } 303 304 atf_test_case raid5_normal cleanup 305 raid5_normal_head() 306 { 307 atf_set "descr" "Checks that RAID5 works after normal shutdown " \ 308 "and 'raidctl -c' startup" 309 atf_set "require.progs" "rump_server" 310 } 311 312 raid5_normal_body() 313 { 314 makecfg 5 3 315 export RUMP_SERVER=unix://sock 316 atf_check -s exit:0 ${raidserver} \ 317 -d key=/disk0,hostpath=disk0.img,size=${RAID_MEDIASIZE} \ 318 -d key=/disk1,hostpath=disk1.img,size=${RAID_MEDIASIZE} \ 319 -d key=/disk2,hostpath=disk2.img,size=${RAID_MEDIASIZE} \ 320 ${RUMP_SERVER} 321 322 atf_check -s exit:0 rump.raidctl -C raid.conf raid0 323 atf_check -s exit:0 rump.raidctl -I 12345 raid0 324 atf_check -s exit:0 -o ignore rump.raidctl -iv raid0 325 326 # put some data there 327 atf_check -s exit:0 -e ignore \ 328 dd if=$(atf_get_srcdir)/t_raid of=testfile count=4 329 atf_check -s exit:0 -e ignore -x \ 330 "dd if=testfile | rump.dd of=${rawraid} conv=sync" 331 332 # restart server after normal shutdown 333 rump.halt 334 335 atf_check -s exit:0 ${raidserver} \ 336 -d key=/disk0,hostpath=disk0.img,size=${RAID_MEDIASIZE} \ 337 -d key=/disk1,hostpath=disk1.img,size=${RAID_MEDIASIZE} \ 338 -d key=/disk2,hostpath=disk2.img,size=${RAID_MEDIASIZE} \ 339 ${RUMP_SERVER} 340 341 atf_check -s exit:0 rump.raidctl -c raid.conf raid0 342 343 # check if we we get what we wrote 344 atf_check -s exit:0 -o file:testfile -e ignore \ 345 rump.dd if=${rawraid} count=4 346 } 347 348 raid5_normal_cleanup() 349 { 350 export RUMP_SERVER=unix://sock 351 rump.halt 352 } 353 354 atf_init_test_cases() 355 { 356 atf_add_test_case smalldisk 357 atf_add_test_case old_numrows_config 358 atf_add_test_case raid1_normal 359 atf_add_test_case raid1_comp0fail 360 atf_add_test_case raid1_compfail 361 atf_add_test_case raid5_normal 362 atf_add_test_case raid5_compfail 363 } 364
Indexes created Wed Oct 01 19:09:53 GMT 2025