Home | History | Annotate | Line # | Download | only in director
      1  1.30     blymn /*	$NetBSD: director.c,v 1.30 2024/07/18 22:10:51 blymn Exp $	*/
      2   1.1     blymn 
      3   1.1     blymn /*-
      4   1.1     blymn  * Copyright 2009 Brett Lymn <blymn (at) NetBSD.org>
      5  1.25    rillig  * Copyright 2021 Roland Illig <rillig (at) NetBSD.org>
      6   1.1     blymn  *
      7   1.1     blymn  * All rights reserved.
      8   1.1     blymn  *
      9   1.1     blymn  * This code has been donated to The NetBSD Foundation by the Author.
     10   1.1     blymn  *
     11   1.1     blymn  * Redistribution and use in source and binary forms, with or without
     12   1.1     blymn  * modification, are permitted provided that the following conditions
     13   1.1     blymn  * are met:
     14   1.1     blymn  * 1. Redistributions of source code must retain the above copyright
     15   1.1     blymn  *    notice, this list of conditions and the following disclaimer.
     16   1.1     blymn  * 2. The name of the author may not be used to endorse or promote products
     17  1.17    rillig  *    derived from this software without specific prior written permission
     18   1.1     blymn  *
     19   1.1     blymn  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     20   1.1     blymn  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     21   1.1     blymn  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     22   1.1     blymn  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     23   1.1     blymn  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     24   1.1     blymn  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     25   1.1     blymn  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     26   1.1     blymn  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     27   1.1     blymn  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     28   1.1     blymn  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     29   1.1     blymn  */
     30   1.1     blymn 
     31   1.6  christos #include <sys/param.h>
     32   1.6  christos #include <sys/stat.h>
     33   1.6  christos #include <sys/mman.h>
     34  1.28    rillig #include <sys/wait.h>
     35   1.1     blymn #include <fcntl.h>
     36   1.1     blymn #include <unistd.h>
     37   1.4  christos #include <ctype.h>
     38   1.1     blymn #include <termios.h>
     39   1.1     blymn #include <signal.h>
     40   1.1     blymn #include <stdio.h>
     41   1.1     blymn #include <stdlib.h>
     42   1.1     blymn #include <string.h>
     43   1.4  christos #include <util.h>
     44   1.4  christos #include <err.h>
     45   1.1     blymn #include "returns.h"
     46  1.11     blymn #include "director.h"
     47   1.1     blymn 
     48   1.4  christos void yyparse(void);
     49   1.1     blymn #define DEF_TERMPATH "."
     50   1.1     blymn #define DEF_TERM "atf"
     51   1.1     blymn #define DEF_SLAVE "./slave"
     52   1.1     blymn 
     53   1.5  christos const char *def_check_path = "./"; /* default check path */
     54   1.1     blymn 
     55  1.23    rillig extern size_t nvars;		/* In testlang_conf.y */
     56   1.1     blymn saved_data_t  saved_output;	/* In testlang_conf.y */
     57  1.21    rillig int to_slave;
     58  1.21    rillig int from_slave;
     59  1.23    rillig int master;			/* pty to the slave */
     60  1.30     blymn int nofail;			/* don't exit on check file fail */
     61  1.23    rillig int verbose;			/* control verbosity of tests */
     62  1.22    rillig int check_file_flag;		/* control check-file generation */
     63  1.23    rillig const char *check_path;		/* path to prepend to check files for output
     64  1.23    rillig 				   validation */
     65  1.23    rillig char *cur_file;			/* name of file currently being read */
     66   1.1     blymn 
     67  1.23    rillig void init_parse_variables(int);	/* in testlang_parse.y */
     68   1.1     blymn 
     69   1.1     blymn /*
     70   1.1     blymn  * Handle the slave exiting unexpectedly, try to recover the exit message
     71   1.1     blymn  * and print it out.
     72  1.13    rillig  *
     73  1.13    rillig  * FIXME: Must not use stdio in a signal handler.  This leads to incomplete
     74  1.13    rillig  * output in verbose mode, truncating the useful part of the error message.
     75   1.1     blymn  */
     76   1.5  christos static void
     77  1.28    rillig slave_died(int signo)
     78   1.1     blymn {
     79   1.1     blymn 	char last_words[256];
     80   1.5  christos 	size_t count;
     81   1.1     blymn 
     82   1.1     blymn 	fprintf(stderr, "ERROR: Slave has exited\n");
     83   1.1     blymn 	if (saved_output.count > 0) {
     84   1.1     blymn 		fprintf(stderr, "output from slave: ");
     85   1.1     blymn 		for (count = 0; count < saved_output.count; count ++) {
     86  1.15    rillig 			unsigned char b = saved_output.data[count];
     87  1.15    rillig 			if (isprint(b))
     88  1.15    rillig 				fprintf(stderr, "%c", b);
     89  1.15    rillig 			else
     90  1.15    rillig 				fprintf(stderr, "\\x%02x", b);
     91   1.1     blymn 		}
     92   1.1     blymn 		fprintf(stderr, "\n");
     93   1.1     blymn 	}
     94   1.1     blymn 
     95   1.1     blymn 	if ((count = read(master, &last_words, 255)) > 0) {
     96   1.1     blymn 		last_words[count] = '\0';
     97   1.1     blymn 		fprintf(stderr, "slave exited with message \"%s\"\n",
     98   1.1     blymn 			last_words);
     99   1.1     blymn 	}
    100   1.1     blymn 
    101   1.1     blymn 	exit(2);
    102   1.1     blymn }
    103   1.1     blymn 
    104   1.1     blymn 
    105   1.1     blymn static void
    106   1.6  christos usage(void)
    107   1.1     blymn {
    108  1.11     blymn 	fprintf(stderr, "Usage: %s [-vgf] [-I include-path] [-C check-path] "
    109   1.6  christos 	    "[-T terminfo-file] [-s pathtoslave] [-t term] "
    110   1.6  christos 	    "commandfile\n", getprogname());
    111   1.1     blymn 	fprintf(stderr, " where:\n");
    112   1.1     blymn 	fprintf(stderr, "    -v enables verbose test output\n");
    113  1.22    rillig 	fprintf(stderr, "    -g generates check-files if they do not exist\n");
    114  1.22    rillig 	fprintf(stderr, "    -f overwrites check-files with the actual data\n");
    115  1.10     joerg 	fprintf(stderr, "    -T is a directory containing the terminfo.cdb "
    116  1.12    rillig 	    "file, or a file holding the terminfo description\n");
    117   1.6  christos 	fprintf(stderr, "    -s is the path to the slave executable\n");
    118   1.6  christos 	fprintf(stderr, "    -t is value to set TERM to for the test\n");
    119  1.22    rillig 	fprintf(stderr, "    -C is the directory for check-files\n");
    120   1.1     blymn 	fprintf(stderr, "    commandfile is a file of test directives\n");
    121   1.6  christos 	exit(1);
    122   1.1     blymn }
    123   1.1     blymn 
    124   1.1     blymn 
    125   1.1     blymn int
    126   1.1     blymn main(int argc, char *argv[])
    127   1.1     blymn {
    128   1.1     blymn 	extern char *optarg;
    129   1.1     blymn 	extern int optind;
    130   1.6  christos 	const char *termpath, *term, *slave;
    131   1.2     joerg 	int ch;
    132   1.1     blymn 	pid_t slave_pid;
    133   1.1     blymn 	extern FILE *yyin;
    134  1.20    rillig 	char *arg1, *arg2;
    135   1.1     blymn 	struct termios term_attr;
    136   1.6  christos 	struct stat st;
    137  1.21    rillig 	int pipe_to_slave[2], pipe_from_slave[2];
    138   1.1     blymn 
    139   1.1     blymn 	termpath = term = slave = NULL;
    140  1.30     blymn 	nofail = 0;
    141   1.1     blymn 	verbose = 0;
    142  1.11     blymn 	check_file_flag = 0;
    143   1.1     blymn 
    144  1.30     blymn 	while ((ch = getopt(argc, argv, "nvgfC:s:t:T:")) != -1) {
    145  1.18    rillig 		switch (ch) {
    146   1.6  christos 		case 'C':
    147   1.6  christos 			check_path = optarg;
    148   1.6  christos 			break;
    149   1.6  christos 		case 'T':
    150   1.6  christos 			termpath = optarg;
    151   1.6  christos 			break;
    152  1.30     blymn 		case 'n':
    153  1.30     blymn 			nofail = 1;
    154  1.30     blymn 			break;
    155   1.1     blymn 		case 's':
    156   1.6  christos 			slave = optarg;
    157   1.1     blymn 			break;
    158   1.1     blymn 		case 't':
    159   1.6  christos 			term = optarg;
    160   1.1     blymn 			break;
    161   1.1     blymn 		case 'v':
    162   1.1     blymn 			verbose = 1;
    163   1.1     blymn 			break;
    164  1.11     blymn 		case 'g':
    165  1.11     blymn 			check_file_flag |= GEN_CHECK_FILE;
    166  1.11     blymn 			break;
    167  1.11     blymn 		case 'f':
    168  1.11     blymn 			check_file_flag |= FORCE_GEN;
    169  1.11     blymn 			break;
    170   1.1     blymn 		case '?':
    171   1.1     blymn 		default:
    172   1.6  christos 			usage();
    173   1.1     blymn 			break;
    174   1.1     blymn 		}
    175   1.1     blymn 	}
    176   1.1     blymn 
    177   1.6  christos 	argc -= optind;
    178   1.6  christos 	argv += optind;
    179  1.14    rillig 	if (argc != 1)
    180   1.6  christos 		usage();
    181   1.6  christos 
    182   1.1     blymn 	if (termpath == NULL)
    183   1.6  christos 		termpath = DEF_TERMPATH;
    184   1.1     blymn 
    185   1.1     blymn 	if (slave == NULL)
    186   1.6  christos 		slave = DEF_SLAVE;
    187   1.1     blymn 
    188   1.1     blymn 	if (term == NULL)
    189   1.6  christos 		term = DEF_TERM;
    190   1.1     blymn 
    191   1.6  christos 	if (check_path == NULL)
    192   1.6  christos 		check_path = getenv("CHECK_PATH");
    193   1.6  christos 	if ((check_path == NULL) || (check_path[0] == '\0')) {
    194  1.19    rillig 		warnx("$CHECK_PATH not set, defaulting to %s", def_check_path);
    195   1.6  christos 		check_path = def_check_path;
    196   1.6  christos 	}
    197   1.6  christos 
    198   1.1     blymn 	signal(SIGCHLD, slave_died);
    199   1.1     blymn 
    200   1.1     blymn 	if (setenv("TERM", term, 1) != 0)
    201   1.1     blymn 		err(2, "Failed to set TERM variable");
    202   1.1     blymn 
    203  1.29       mcf 	if (unsetenv("ESCDELAY") != 0)
    204  1.29       mcf 		err(2, "Failed to unset ESCDELAY variable");
    205  1.29       mcf 
    206   1.6  christos 	if (stat(termpath, &st) == -1)
    207   1.6  christos 		err(1, "Cannot stat %s", termpath);
    208   1.1     blymn 
    209   1.6  christos 	if (S_ISDIR(st.st_mode)) {
    210   1.6  christos 		char tinfo[MAXPATHLEN];
    211   1.7  christos 		int l = snprintf(tinfo, sizeof(tinfo), "%s/%s", termpath,
    212  1.10     joerg 		    "terminfo.cdb");
    213   1.7  christos 		if (stat(tinfo, &st) == -1)
    214   1.7  christos 			err(1, "Cannot stat `%s'", tinfo);
    215  1.10     joerg 		if (l >= 4)
    216  1.10     joerg 			tinfo[l - 4] = '\0';
    217   1.7  christos 		if (setenv("TERMINFO", tinfo, 1) != 0)
    218   1.7  christos 			err(1, "Failed to set TERMINFO variable");
    219   1.6  christos 	} else {
    220   1.6  christos 		int fd;
    221   1.6  christos 		char *tinfo;
    222   1.6  christos 		if ((fd = open(termpath, O_RDONLY)) == -1)
    223   1.6  christos 			err(1, "Cannot open `%s'", termpath);
    224   1.6  christos 		if ((tinfo = mmap(NULL, (size_t)st.st_size, PROT_READ, MAP_FILE,
    225   1.6  christos 			fd, 0)) == MAP_FAILED)
    226   1.6  christos 			err(1, "Cannot map `%s'", termpath);
    227   1.6  christos 		if (setenv("TERMINFO", tinfo, 1) != 0)
    228   1.7  christos 			err(1, "Failed to set TERMINFO variable");
    229   1.6  christos 		close(fd);
    230   1.6  christos 		munmap(tinfo, (size_t)st.st_size);
    231   1.1     blymn 	}
    232   1.1     blymn 
    233  1.21    rillig 	if (pipe(pipe_to_slave) < 0)
    234   1.5  christos 		err(1, "Command pipe creation failed");
    235  1.21    rillig 	to_slave = pipe_to_slave[1];
    236   1.1     blymn 
    237  1.21    rillig 	if (pipe(pipe_from_slave) < 0)
    238   1.5  christos 		err(1, "Slave pipe creation failed");
    239  1.21    rillig 	from_slave = pipe_from_slave[0];
    240   1.1     blymn 
    241   1.3    martin 	/*
    242   1.3    martin 	 * Create default termios settings for later use
    243   1.3    martin 	 */
    244   1.3    martin 	memset(&term_attr, 0, sizeof(term_attr));
    245   1.3    martin 	term_attr.c_iflag = TTYDEF_IFLAG;
    246   1.3    martin 	term_attr.c_oflag = TTYDEF_OFLAG;
    247   1.3    martin 	term_attr.c_cflag = TTYDEF_CFLAG;
    248   1.3    martin 	term_attr.c_lflag = TTYDEF_LFLAG;
    249   1.3    martin 	cfsetspeed(&term_attr, TTYDEF_SPEED);
    250   1.8     blymn 	term_attr.c_cc[VERASE] = '\b';
    251   1.8     blymn 	term_attr.c_cc[VKILL] = '\025'; /* ^U */
    252   1.1     blymn 
    253   1.5  christos 	if ((slave_pid = forkpty(&master, NULL, &term_attr, NULL)) < 0)
    254   1.5  christos 		err(1, "Fork of pty for slave failed\n");
    255   1.1     blymn 
    256   1.1     blymn 	if (slave_pid == 0) {
    257   1.1     blymn 		/* slave side, just exec the slave process */
    258  1.21    rillig 		if (asprintf(&arg1, "%d", pipe_to_slave[0]) < 0)
    259   1.1     blymn 			err(1, "arg1 conversion failed");
    260  1.21    rillig 		close(pipe_to_slave[1]);
    261   1.1     blymn 
    262  1.21    rillig 		close(pipe_from_slave[0]);
    263  1.21    rillig 		if (asprintf(&arg2, "%d", pipe_from_slave[1]) < 0)
    264   1.1     blymn 			err(1, "arg2 conversion failed");
    265   1.1     blymn 
    266  1.20    rillig 		if (execl(slave, slave, arg1, arg2, (char *)0) < 0)
    267   1.5  christos 			err(1, "Exec of slave %s failed", slave);
    268   1.1     blymn 
    269   1.1     blymn 		/* NOT REACHED */
    270   1.1     blymn 	}
    271   1.1     blymn 
    272  1.21    rillig 	(void)close(pipe_to_slave[0]);
    273  1.21    rillig 	(void)close(pipe_from_slave[1]);
    274  1.21    rillig 
    275   1.1     blymn 	fcntl(master, F_SETFL, O_NONBLOCK);
    276   1.1     blymn 
    277   1.5  christos 	if ((yyin = fopen(argv[0], "r")) == NULL)
    278   1.5  christos 		err(1, "Cannot open command file %s", argv[0]);
    279   1.1     blymn 
    280   1.9     joerg 	if ((cur_file = strdup(argv[0])) == NULL)
    281   1.1     blymn 		err(2, "Failed to alloc memory for test file name");
    282   1.1     blymn 
    283   1.1     blymn 	init_parse_variables(1);
    284   1.1     blymn 
    285   1.1     blymn 	yyparse();
    286   1.1     blymn 	fclose(yyin);
    287   1.1     blymn 
    288  1.28    rillig 	signal(SIGCHLD, SIG_DFL);
    289  1.28    rillig 	(void)close(to_slave);
    290  1.28    rillig 	(void)close(from_slave);
    291  1.28    rillig 
    292  1.28    rillig 	int status;
    293  1.28    rillig 	(void)waitpid(slave_pid, &status, 0);
    294  1.28    rillig 
    295   1.1     blymn 	exit(0);
    296   1.1     blymn }
    297