Home | History | Annotate | Line # | Download | only in director
director.c revision 1.22
      1  1.22    rillig /*	$NetBSD: director.c,v 1.22 2021/02/13 07:31:07 rillig Exp $	*/
      2   1.1     blymn 
      3   1.1     blymn /*-
      4   1.1     blymn  * Copyright 2009 Brett Lymn <blymn (at) NetBSD.org>
      5   1.1     blymn  *
      6   1.1     blymn  * All rights reserved.
      7   1.1     blymn  *
      8   1.1     blymn  * This code has been donated to The NetBSD Foundation by the Author.
      9   1.1     blymn  *
     10   1.1     blymn  * Redistribution and use in source and binary forms, with or without
     11   1.1     blymn  * modification, are permitted provided that the following conditions
     12   1.1     blymn  * are met:
     13   1.1     blymn  * 1. Redistributions of source code must retain the above copyright
     14   1.1     blymn  *    notice, this list of conditions and the following disclaimer.
     15   1.1     blymn  * 2. The name of the author may not be used to endorse or promote products
     16  1.17    rillig  *    derived from this software without specific prior written permission
     17   1.1     blymn  *
     18   1.1     blymn  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     19   1.1     blymn  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     20   1.1     blymn  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     21   1.1     blymn  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     22   1.1     blymn  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     23   1.1     blymn  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     24   1.1     blymn  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     25   1.1     blymn  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     26   1.1     blymn  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     27   1.1     blymn  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     28   1.1     blymn  *
     29   1.1     blymn  *
     30   1.1     blymn  */
     31   1.1     blymn 
     32   1.6  christos #include <sys/param.h>
     33   1.6  christos #include <sys/stat.h>
     34   1.6  christos #include <sys/mman.h>
     35   1.1     blymn #include <fcntl.h>
     36   1.1     blymn #include <unistd.h>
     37   1.4  christos #include <ctype.h>
     38   1.1     blymn #include <termios.h>
     39   1.1     blymn #include <signal.h>
     40   1.1     blymn #include <stdio.h>
     41   1.1     blymn #include <stdlib.h>
     42   1.1     blymn #include <string.h>
     43   1.4  christos #include <util.h>
     44   1.4  christos #include <err.h>
     45   1.1     blymn #include "returns.h"
     46  1.11     blymn #include "director.h"
     47   1.1     blymn 
     48   1.4  christos void yyparse(void);
     49   1.1     blymn #define DEF_TERMPATH "."
     50   1.1     blymn #define DEF_TERM "atf"
     51   1.1     blymn #define DEF_SLAVE "./slave"
     52   1.1     blymn 
     53   1.5  christos const char *def_check_path = "./"; /* default check path */
     54   1.5  christos const char *def_include_path = "./"; /* default include path */
     55   1.1     blymn 
     56   1.1     blymn extern size_t nvars;	/* In testlang_conf.y */
     57   1.1     blymn saved_data_t  saved_output;	/* In testlang_conf.y */
     58  1.21    rillig int to_slave;
     59  1.21    rillig int from_slave;
     60   1.1     blymn int master;		/* pty to the slave */
     61   1.1     blymn int verbose;		/* control verbosity of tests */
     62  1.22    rillig int check_file_flag;		/* control check-file generation */
     63   1.5  christos const char *check_path;	/* path to prepend to check files for output
     64   1.1     blymn 			   validation */
     65   1.5  christos const char *include_path;	/* path to prepend to include files */
     66   1.1     blymn char *cur_file;		/* name of file currently being read */
     67   1.1     blymn 
     68   1.1     blymn void init_parse_variables(int); /* in testlang_parse.y */
     69   1.1     blymn 
     70   1.1     blymn /*
     71   1.1     blymn  * Handle the slave exiting unexpectedly, try to recover the exit message
     72   1.1     blymn  * and print it out.
     73  1.13    rillig  *
     74  1.13    rillig  * FIXME: Must not use stdio in a signal handler.  This leads to incomplete
     75  1.13    rillig  * output in verbose mode, truncating the useful part of the error message.
     76   1.1     blymn  */
     77   1.5  christos static void
     78   1.1     blymn slave_died(int param)
     79   1.1     blymn {
     80   1.1     blymn 	char last_words[256];
     81   1.5  christos 	size_t count;
     82   1.1     blymn 
     83   1.1     blymn 	fprintf(stderr, "ERROR: Slave has exited\n");
     84   1.1     blymn 	if (saved_output.count > 0) {
     85   1.1     blymn 		fprintf(stderr, "output from slave: ");
     86   1.1     blymn 		for (count = 0; count < saved_output.count; count ++) {
     87  1.15    rillig 			unsigned char b = saved_output.data[count];
     88  1.15    rillig 			if (isprint(b))
     89  1.15    rillig 				fprintf(stderr, "%c", b);
     90  1.15    rillig 			else
     91  1.15    rillig 				fprintf(stderr, "\\x%02x", b);
     92   1.1     blymn 		}
     93   1.1     blymn 		fprintf(stderr, "\n");
     94   1.1     blymn 	}
     95   1.1     blymn 
     96   1.1     blymn 	if ((count = read(master, &last_words, 255)) > 0) {
     97   1.1     blymn 		last_words[count] = '\0';
     98   1.1     blymn 		fprintf(stderr, "slave exited with message \"%s\"\n",
     99   1.1     blymn 			last_words);
    100   1.1     blymn 	}
    101   1.1     blymn 
    102   1.1     blymn 	exit(2);
    103   1.1     blymn }
    104   1.1     blymn 
    105   1.1     blymn 
    106   1.1     blymn static void
    107   1.6  christos usage(void)
    108   1.1     blymn {
    109  1.11     blymn 	fprintf(stderr, "Usage: %s [-vgf] [-I include-path] [-C check-path] "
    110   1.6  christos 	    "[-T terminfo-file] [-s pathtoslave] [-t term] "
    111   1.6  christos 	    "commandfile\n", getprogname());
    112   1.1     blymn 	fprintf(stderr, " where:\n");
    113   1.1     blymn 	fprintf(stderr, "    -v enables verbose test output\n");
    114  1.22    rillig 	fprintf(stderr, "    -g generates check-files if they do not exist\n");
    115  1.22    rillig 	fprintf(stderr, "    -f overwrites check-files with the actual data\n");
    116  1.10     joerg 	fprintf(stderr, "    -T is a directory containing the terminfo.cdb "
    117  1.12    rillig 	    "file, or a file holding the terminfo description\n");
    118   1.6  christos 	fprintf(stderr, "    -s is the path to the slave executable\n");
    119   1.6  christos 	fprintf(stderr, "    -t is value to set TERM to for the test\n");
    120   1.6  christos 	fprintf(stderr, "    -I is the directory to include files\n");
    121  1.22    rillig 	fprintf(stderr, "    -C is the directory for check-files\n");
    122   1.1     blymn 	fprintf(stderr, "    commandfile is a file of test directives\n");
    123   1.6  christos 	exit(1);
    124   1.1     blymn }
    125   1.1     blymn 
    126   1.1     blymn 
    127   1.1     blymn int
    128   1.1     blymn main(int argc, char *argv[])
    129   1.1     blymn {
    130   1.1     blymn 	extern char *optarg;
    131   1.1     blymn 	extern int optind;
    132   1.6  christos 	const char *termpath, *term, *slave;
    133   1.2     joerg 	int ch;
    134   1.1     blymn 	pid_t slave_pid;
    135   1.1     blymn 	extern FILE *yyin;
    136  1.20    rillig 	char *arg1, *arg2;
    137   1.1     blymn 	struct termios term_attr;
    138   1.6  christos 	struct stat st;
    139  1.21    rillig 	int pipe_to_slave[2], pipe_from_slave[2];
    140   1.1     blymn 
    141   1.1     blymn 	termpath = term = slave = NULL;
    142   1.1     blymn 	verbose = 0;
    143  1.11     blymn 	check_file_flag = 0;
    144   1.1     blymn 
    145  1.11     blymn 	while ((ch = getopt(argc, argv, "vgfC:I:p:s:t:T:")) != -1) {
    146  1.18    rillig 		switch (ch) {
    147   1.6  christos 		case 'I':
    148   1.6  christos 			include_path = optarg;
    149   1.6  christos 			break;
    150   1.6  christos 		case 'C':
    151   1.6  christos 			check_path = optarg;
    152   1.6  christos 			break;
    153   1.6  christos 		case 'T':
    154   1.6  christos 			termpath = optarg;
    155   1.6  christos 			break;
    156   1.1     blymn 		case 'p':
    157   1.6  christos 			termpath = optarg;
    158   1.1     blymn 			break;
    159   1.1     blymn 		case 's':
    160   1.6  christos 			slave = optarg;
    161   1.1     blymn 			break;
    162   1.1     blymn 		case 't':
    163   1.6  christos 			term = optarg;
    164   1.1     blymn 			break;
    165   1.1     blymn 		case 'v':
    166   1.1     blymn 			verbose = 1;
    167   1.1     blymn 			break;
    168  1.11     blymn 		case 'g':
    169  1.11     blymn 			check_file_flag |= GEN_CHECK_FILE;
    170  1.11     blymn 			break;
    171  1.11     blymn 		case 'f':
    172  1.11     blymn 			check_file_flag |= FORCE_GEN;
    173  1.11     blymn 			break;
    174   1.1     blymn 		case '?':
    175   1.1     blymn 		default:
    176   1.6  christos 			usage();
    177   1.1     blymn 			break;
    178   1.1     blymn 		}
    179   1.1     blymn 	}
    180   1.1     blymn 
    181   1.6  christos 	argc -= optind;
    182   1.6  christos 	argv += optind;
    183  1.14    rillig 	if (argc != 1)
    184   1.6  christos 		usage();
    185   1.6  christos 
    186   1.1     blymn 	if (termpath == NULL)
    187   1.6  christos 		termpath = DEF_TERMPATH;
    188   1.1     blymn 
    189   1.1     blymn 	if (slave == NULL)
    190   1.6  christos 		slave = DEF_SLAVE;
    191   1.1     blymn 
    192   1.1     blymn 	if (term == NULL)
    193   1.6  christos 		term = DEF_TERM;
    194   1.1     blymn 
    195   1.6  christos 	if (check_path == NULL)
    196   1.6  christos 		check_path = getenv("CHECK_PATH");
    197   1.6  christos 	if ((check_path == NULL) || (check_path[0] == '\0')) {
    198  1.19    rillig 		warnx("$CHECK_PATH not set, defaulting to %s", def_check_path);
    199   1.6  christos 		check_path = def_check_path;
    200   1.6  christos 	}
    201   1.6  christos 
    202   1.6  christos 	if (include_path == NULL)
    203   1.6  christos 		include_path = getenv("INCLUDE_PATH");
    204   1.6  christos 	if ((include_path == NULL) || (include_path[0] == '\0')) {
    205  1.19    rillig 		warnx("$INCLUDE_PATH not set, defaulting to %s",
    206   1.6  christos 			def_include_path);
    207   1.6  christos 		include_path = def_include_path;
    208   1.6  christos 	}
    209   1.1     blymn 
    210   1.1     blymn 	signal(SIGCHLD, slave_died);
    211   1.1     blymn 
    212   1.1     blymn 	if (setenv("TERM", term, 1) != 0)
    213   1.1     blymn 		err(2, "Failed to set TERM variable");
    214   1.1     blymn 
    215   1.6  christos 	if (stat(termpath, &st) == -1)
    216   1.6  christos 		err(1, "Cannot stat %s", termpath);
    217   1.1     blymn 
    218   1.6  christos 	if (S_ISDIR(st.st_mode)) {
    219   1.6  christos 		char tinfo[MAXPATHLEN];
    220   1.7  christos 		int l = snprintf(tinfo, sizeof(tinfo), "%s/%s", termpath,
    221  1.10     joerg 		    "terminfo.cdb");
    222   1.7  christos 		if (stat(tinfo, &st) == -1)
    223   1.7  christos 			err(1, "Cannot stat `%s'", tinfo);
    224  1.10     joerg 		if (l >= 4)
    225  1.10     joerg 			tinfo[l - 4] = '\0';
    226   1.7  christos 		if (setenv("TERMINFO", tinfo, 1) != 0)
    227   1.7  christos 			err(1, "Failed to set TERMINFO variable");
    228   1.6  christos 	} else {
    229   1.6  christos 		int fd;
    230   1.6  christos 		char *tinfo;
    231   1.6  christos 		if ((fd = open(termpath, O_RDONLY)) == -1)
    232   1.6  christos 			err(1, "Cannot open `%s'", termpath);
    233   1.6  christos 		if ((tinfo = mmap(NULL, (size_t)st.st_size, PROT_READ, MAP_FILE,
    234   1.6  christos 			fd, 0)) == MAP_FAILED)
    235   1.6  christos 			err(1, "Cannot map `%s'", termpath);
    236   1.6  christos 		if (setenv("TERMINFO", tinfo, 1) != 0)
    237   1.7  christos 			err(1, "Failed to set TERMINFO variable");
    238   1.6  christos 		close(fd);
    239   1.6  christos 		munmap(tinfo, (size_t)st.st_size);
    240   1.1     blymn 	}
    241   1.1     blymn 
    242  1.21    rillig 	if (pipe(pipe_to_slave) < 0)
    243   1.5  christos 		err(1, "Command pipe creation failed");
    244  1.21    rillig 	to_slave = pipe_to_slave[1];
    245   1.1     blymn 
    246  1.21    rillig 	if (pipe(pipe_from_slave) < 0)
    247   1.5  christos 		err(1, "Slave pipe creation failed");
    248  1.21    rillig 	from_slave = pipe_from_slave[0];
    249   1.1     blymn 
    250   1.3    martin 	/*
    251   1.3    martin 	 * Create default termios settings for later use
    252   1.3    martin 	 */
    253   1.3    martin 	memset(&term_attr, 0, sizeof(term_attr));
    254   1.3    martin 	term_attr.c_iflag = TTYDEF_IFLAG;
    255   1.3    martin 	term_attr.c_oflag = TTYDEF_OFLAG;
    256   1.3    martin 	term_attr.c_cflag = TTYDEF_CFLAG;
    257   1.3    martin 	term_attr.c_lflag = TTYDEF_LFLAG;
    258   1.3    martin 	cfsetspeed(&term_attr, TTYDEF_SPEED);
    259   1.8     blymn 	term_attr.c_cc[VERASE] = '\b';
    260   1.8     blymn 	term_attr.c_cc[VKILL] = '\025'; /* ^U */
    261   1.1     blymn 
    262   1.5  christos 	if ((slave_pid = forkpty(&master, NULL, &term_attr, NULL)) < 0)
    263   1.5  christos 		err(1, "Fork of pty for slave failed\n");
    264   1.1     blymn 
    265   1.1     blymn 	if (slave_pid == 0) {
    266   1.1     blymn 		/* slave side, just exec the slave process */
    267  1.21    rillig 		if (asprintf(&arg1, "%d", pipe_to_slave[0]) < 0)
    268   1.1     blymn 			err(1, "arg1 conversion failed");
    269  1.21    rillig 		close(pipe_to_slave[1]);
    270   1.1     blymn 
    271  1.21    rillig 		close(pipe_from_slave[0]);
    272  1.21    rillig 		if (asprintf(&arg2, "%d", pipe_from_slave[1]) < 0)
    273   1.1     blymn 			err(1, "arg2 conversion failed");
    274   1.1     blymn 
    275  1.20    rillig 		if (execl(slave, slave, arg1, arg2, (char *)0) < 0)
    276   1.5  christos 			err(1, "Exec of slave %s failed", slave);
    277   1.1     blymn 
    278   1.1     blymn 		/* NOT REACHED */
    279   1.1     blymn 	}
    280   1.1     blymn 
    281  1.21    rillig 	(void)close(pipe_to_slave[0]);
    282  1.21    rillig 	(void)close(pipe_from_slave[1]);
    283  1.21    rillig 
    284   1.1     blymn 	fcntl(master, F_SETFL, O_NONBLOCK);
    285   1.1     blymn 
    286   1.5  christos 	if ((yyin = fopen(argv[0], "r")) == NULL)
    287   1.5  christos 		err(1, "Cannot open command file %s", argv[0]);
    288   1.1     blymn 
    289   1.9     joerg 	if ((cur_file = strdup(argv[0])) == NULL)
    290   1.1     blymn 		err(2, "Failed to alloc memory for test file name");
    291   1.1     blymn 
    292   1.1     blymn 	init_parse_variables(1);
    293   1.1     blymn 
    294   1.1     blymn 	yyparse();
    295   1.1     blymn 	fclose(yyin);
    296   1.1     blymn 
    297   1.1     blymn 	exit(0);
    298   1.1     blymn }
    299