Home | History | Annotate | Line # | Download | only in slave
commands.c revision 1.7
      1  1.7    rillig /*	$NetBSD: commands.c,v 1.7 2021/02/08 19:15:21 rillig Exp $	*/
      2  1.1     blymn 
      3  1.1     blymn /*-
      4  1.1     blymn  * Copyright 2009 Brett Lymn <blymn (at) NetBSD.org>
      5  1.1     blymn  *
      6  1.1     blymn  * All rights reserved.
      7  1.1     blymn  *
      8  1.1     blymn  * This code has been donated to The NetBSD Foundation by the Author.
      9  1.1     blymn  *
     10  1.1     blymn  * Redistribution and use in source and binary forms, with or without
     11  1.1     blymn  * modification, are permitted provided that the following conditions
     12  1.1     blymn  * are met:
     13  1.1     blymn  * 1. Redistributions of source code must retain the above copyright
     14  1.1     blymn  *    notice, this list of conditions and the following disclaimer.
     15  1.1     blymn  * 2. The name of the author may not be used to endorse or promote products
     16  1.7    rillig  *    derived from this software without specific prior written permission
     17  1.1     blymn  *
     18  1.1     blymn  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     19  1.1     blymn  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     20  1.1     blymn  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     21  1.1     blymn  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     22  1.1     blymn  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     23  1.1     blymn  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     24  1.1     blymn  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     25  1.1     blymn  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     26  1.1     blymn  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     27  1.1     blymn  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     28  1.1     blymn  *
     29  1.1     blymn  *
     30  1.1     blymn  */
     31  1.1     blymn 
     32  1.1     blymn #include <curses.h>
     33  1.1     blymn #include <string.h>
     34  1.1     blymn #include <stdlib.h>
     35  1.1     blymn #include <stdio.h>
     36  1.2  christos #include <unistd.h>
     37  1.3  christos #include <err.h>
     38  1.1     blymn #include <sys/types.h>
     39  1.1     blymn #include "returns.h"
     40  1.1     blymn #include "slave.h"
     41  1.1     blymn #include "command_table.h"
     42  1.1     blymn 
     43  1.1     blymn extern int cmdpipe[2];
     44  1.1     blymn extern int slvpipe[2];
     45  1.6     blymn extern int initdone;
     46  1.1     blymn 
     47  1.5     blymn static void report_type(data_enum_t);
     48  1.3  christos static void report_message(int, const char *);
     49  1.1     blymn 
     50  1.1     blymn /*
     51  1.1     blymn  * Match the passed command string and execute the associated test
     52  1.1     blymn  * function.
     53  1.1     blymn  */
     54  1.1     blymn void
     55  1.1     blymn command_execute(char *func, int nargs, char **args)
     56  1.1     blymn {
     57  1.6     blymn 	size_t i, j;
     58  1.1     blymn 
     59  1.1     blymn 	i = 0;
     60  1.1     blymn 	while (i < ncmds) {
     61  1.1     blymn 		if (strcasecmp(func, commands[i].name) == 0) {
     62  1.6     blymn 			/* Check only restricted set of functions is called before
     63  1.6     blymn 			 * initscr/newterm */
     64  1.6     blymn 			if(!initdone){
     65  1.6     blymn 				j = 0;
     66  1.6     blymn 				while(j < nrcmds) {
     67  1.6     blymn 					if(strcasecmp(func, restricted_commands[j]) == 0){
     68  1.6     blymn 						if(strcasecmp(func, "initscr") == 0  ||
     69  1.6     blymn 							strcasecmp(func, "newterm") == 0)
     70  1.6     blymn 							initdone = 1;
     71  1.6     blymn 						/* matched function */
     72  1.6     blymn 						commands[i].func(nargs, args);
     73  1.6     blymn 						return;
     74  1.6     blymn 					}
     75  1.6     blymn 					j++;
     76  1.6     blymn 				}
     77  1.6     blymn 				report_status("YOU NEED TO CALL INITSCR/NEWTERM FIRST");
     78  1.6     blymn 				return;
     79  1.6     blymn 			}
     80  1.1     blymn 			/* matched function */
     81  1.1     blymn 			commands[i].func(nargs, args);
     82  1.1     blymn 			return;
     83  1.1     blymn 		}
     84  1.1     blymn 		i++;
     85  1.1     blymn 	}
     86  1.1     blymn 
     87  1.1     blymn 	report_status("UNKNOWN_FUNCTION");
     88  1.1     blymn }
     89  1.1     blymn 
     90  1.1     blymn /*
     91  1.1     blymn  * Report an pointer value back to the director
     92  1.1     blymn  */
     93  1.1     blymn void
     94  1.1     blymn report_ptr(void *ptr)
     95  1.1     blymn {
     96  1.1     blymn 	char *string;
     97  1.1     blymn 
     98  1.4     blymn 	if (ptr == NULL)
     99  1.4     blymn 		asprintf(&string, "NULL");
    100  1.4     blymn 	else
    101  1.4     blymn 		asprintf(&string, "%p", ptr);
    102  1.1     blymn 	report_status(string);
    103  1.1     blymn 	free(string);
    104  1.1     blymn }
    105  1.1     blymn 
    106  1.1     blymn /*
    107  1.1     blymn  * Report an integer value back to the director
    108  1.1     blymn  */
    109  1.1     blymn void
    110  1.1     blymn report_int(int value)
    111  1.1     blymn {
    112  1.1     blymn 	char *string;
    113  1.1     blymn 
    114  1.1     blymn 	asprintf(&string, "%d", value);
    115  1.1     blymn 	report_status(string);
    116  1.1     blymn 	free(string);
    117  1.1     blymn }
    118  1.1     blymn 
    119  1.1     blymn /*
    120  1.1     blymn  * Report either an ERR or OK back to the director
    121  1.1     blymn  */
    122  1.1     blymn void
    123  1.1     blymn report_return(int status)
    124  1.1     blymn {
    125  1.1     blymn 	if (status == ERR)
    126  1.5     blymn 		report_type(data_err);
    127  1.1     blymn 	else if (status == OK)
    128  1.5     blymn 		report_type(data_ok);
    129  1.6     blymn 	else if (status == KEY_CODE_YES)
    130  1.6     blymn 		report_int(status);
    131  1.1     blymn 	else
    132  1.1     blymn 		report_status("INVALID_RETURN");
    133  1.1     blymn }
    134  1.1     blymn 
    135  1.1     blymn /*
    136  1.1     blymn  * Report the type back to the director via the command pipe
    137  1.1     blymn  */
    138  1.1     blymn static void
    139  1.5     blymn report_type(data_enum_t return_type)
    140  1.1     blymn {
    141  1.1     blymn 	int type;
    142  1.1     blymn 
    143  1.1     blymn 	type = return_type;
    144  1.3  christos 	if (write(slvpipe[WRITE_PIPE], &type, sizeof(int)) < 0)
    145  1.3  christos 		err(1, "command pipe write for status type failed");
    146  1.1     blymn 
    147  1.1     blymn }
    148  1.1     blymn 
    149  1.1     blymn /*
    150  1.1     blymn  * Report the number of returns back to the director via the command pipe
    151  1.1     blymn  */
    152  1.1     blymn void
    153  1.1     blymn report_count(int count)
    154  1.1     blymn {
    155  1.1     blymn 	int type;
    156  1.1     blymn 
    157  1.5     blymn 	type = data_count;
    158  1.3  christos 	if (write(slvpipe[WRITE_PIPE], &type, sizeof(int)) < 0)
    159  1.3  christos 		err(1, "command pipe write for count type failed");
    160  1.1     blymn 
    161  1.3  christos 	if (write(slvpipe[WRITE_PIPE], &count, sizeof(int)) < 0)
    162  1.3  christos 		err(1, "command pipe write for count");
    163  1.1     blymn }
    164  1.1     blymn 
    165  1.1     blymn /*
    166  1.1     blymn  * Report the status back to the director via the command pipe
    167  1.1     blymn  */
    168  1.1     blymn void
    169  1.3  christos report_status(const char *status)
    170  1.1     blymn {
    171  1.5     blymn 	report_message(data_string, status);
    172  1.1     blymn }
    173  1.1     blymn 
    174  1.1     blymn /*
    175  1.1     blymn  * Report an error message back to the director via the command pipe.
    176  1.1     blymn  */
    177  1.1     blymn void
    178  1.3  christos report_error(const char *status)
    179  1.1     blymn {
    180  1.5     blymn 	report_message(data_slave_error, status);
    181  1.1     blymn }
    182  1.1     blymn 
    183  1.1     blymn /*
    184  1.1     blymn  * Report the message with the given type back to the director via the
    185  1.1     blymn  * command pipe.
    186  1.1     blymn  */
    187  1.1     blymn static void
    188  1.3  christos report_message(int type, const char *status)
    189  1.1     blymn {
    190  1.1     blymn 	int len;
    191  1.1     blymn 
    192  1.1     blymn 	len = strlen(status);
    193  1.1     blymn 
    194  1.3  christos 	if (write(slvpipe[WRITE_PIPE], &type, sizeof(int)) < 0)
    195  1.3  christos 		err(1, "command pipe write for message type failed");
    196  1.1     blymn 
    197  1.3  christos 	if (write(slvpipe[WRITE_PIPE], &len, sizeof(int)) < 0)
    198  1.3  christos 		err(1, "command pipe write for message length failed");
    199  1.1     blymn 
    200  1.3  christos 	if (write(slvpipe[WRITE_PIPE], status, len) < 0)
    201  1.3  christos 		err(1, "command pipe write of message data failed");
    202  1.1     blymn }
    203  1.1     blymn 
    204  1.1     blymn /*
    205  1.1     blymn  * Report a string of chtype back to the director via the command pipe.
    206  1.1     blymn  */
    207  1.1     blymn void
    208  1.4     blymn report_byte(chtype c)
    209  1.4     blymn {
    210  1.4     blymn 	chtype string[2];
    211  1.4     blymn 
    212  1.4     blymn 	string[0] = c;
    213  1.4     blymn 	string[1] = A_NORMAL | '\0';
    214  1.4     blymn 	report_nstr(string);
    215  1.4     blymn }
    216  1.4     blymn 
    217  1.4     blymn /*
    218  1.4     blymn  * Report a string of chtype back to the director via the command pipe.
    219  1.4     blymn  */
    220  1.4     blymn void
    221  1.1     blymn report_nstr(chtype *string)
    222  1.1     blymn {
    223  1.1     blymn 	int len, type;
    224  1.1     blymn 	chtype *p;
    225  1.1     blymn 
    226  1.1     blymn 	len = 0;
    227  1.1     blymn 	p = string;
    228  1.1     blymn 
    229  1.1     blymn 	while ((*p++ & __CHARTEXT) != 0) {
    230  1.1     blymn 		len++;
    231  1.1     blymn 	}
    232  1.1     blymn 
    233  1.4     blymn 	len++; /* add in the termination chtype */
    234  1.4     blymn 	len *= sizeof(chtype);
    235  1.4     blymn 
    236  1.5     blymn 	type = data_byte;
    237  1.3  christos 	if (write(slvpipe[WRITE_PIPE], &type, sizeof(int)) < 0)
    238  1.3  christos 		err(1, "%s: command pipe write for status type failed",
    239  1.3  christos 		    __func__);
    240  1.3  christos 
    241  1.3  christos 	if (write(slvpipe[WRITE_PIPE], &len, sizeof(int)) < 0)
    242  1.3  christos 		err(1, "%s: command pipe write for status length failed",
    243  1.3  christos 		    __func__);
    244  1.3  christos 
    245  1.3  christos 	if (write(slvpipe[WRITE_PIPE], string, len) < 0)
    246  1.3  christos 		err(1, "%s: command pipe write of status data failed",
    247  1.3  christos 		    __func__);
    248  1.1     blymn }
    249  1.1     blymn 
    250  1.1     blymn /*
    251  1.6     blymn  * Report a cchar_t back to the director via the command pipe.
    252  1.6     blymn  */
    253  1.6     blymn void
    254  1.6     blymn report_cchar(cchar_t c)
    255  1.6     blymn {
    256  1.6     blymn 	int len, type;
    257  1.6     blymn 	len = sizeof(cchar_t);
    258  1.6     blymn 	type = data_cchar;
    259  1.6     blymn 
    260  1.6     blymn 	if (write(slvpipe[WRITE_PIPE], &type, sizeof(int)) < 0)
    261  1.6     blymn 		err(1, "%s: command pipe write for status type failed",
    262  1.6     blymn 		    __func__);
    263  1.6     blymn 
    264  1.6     blymn 	if (write(slvpipe[WRITE_PIPE], &len, sizeof(int)) < 0)
    265  1.6     blymn 		err(1, "%s: command pipe write for status length failed",
    266  1.6     blymn 		    __func__);
    267  1.6     blymn 
    268  1.6     blymn 	if (write(slvpipe[WRITE_PIPE], &c, len) < 0)
    269  1.6     blymn 		err(1, "%s: command pipe write of status data failed",
    270  1.6     blymn 		    __func__);
    271  1.6     blymn }
    272  1.6     blymn 
    273  1.6     blymn /*
    274  1.6     blymn  * Report a wchar_t back to the director via the command pipe.
    275  1.6     blymn  */
    276  1.6     blymn void
    277  1.6     blymn report_wchar(wchar_t ch)
    278  1.6     blymn {
    279  1.6     blymn 	wchar_t wstr[2];
    280  1.6     blymn 
    281  1.6     blymn 	wstr[0] = ch;
    282  1.6     blymn 	wstr[1] = L'\0';
    283  1.6     blymn 	report_wstr(wstr);
    284  1.6     blymn }
    285  1.6     blymn 
    286  1.6     blymn 
    287  1.6     blymn /*
    288  1.6     blymn  * Report a string of wchar_t back to the director via the command pipe.
    289  1.6     blymn  */
    290  1.6     blymn void
    291  1.6     blymn report_wstr(wchar_t *wstr)
    292  1.6     blymn {
    293  1.6     blymn 	int len, type;
    294  1.6     blymn 	wchar_t *p;
    295  1.6     blymn 
    296  1.6     blymn 	len = 0;
    297  1.6     blymn 	p = wstr;
    298  1.6     blymn 
    299  1.6     blymn 	while (*p++ != L'\0')
    300  1.6     blymn 		len++;
    301  1.6     blymn 
    302  1.6     blymn 	len++; /* add in the termination chtype */
    303  1.6     blymn 	len *= sizeof(wchar_t);
    304  1.6     blymn 
    305  1.6     blymn 	type = data_wchar;
    306  1.6     blymn 	if (write(slvpipe[WRITE_PIPE], &type, sizeof(int)) < 0)
    307  1.6     blymn 		err(1, "%s: command pipe write for status type failed",
    308  1.6     blymn 		    __func__);
    309  1.6     blymn 
    310  1.6     blymn 	if (write(slvpipe[WRITE_PIPE], &len, sizeof(int)) < 0)
    311  1.6     blymn 		err(1, "%s: command pipe write for status length failed",
    312  1.6     blymn 		    __func__);
    313  1.6     blymn 
    314  1.6     blymn 	if (write(slvpipe[WRITE_PIPE], wstr, len) < 0)
    315  1.6     blymn 		err(1, "%s: command pipe write of status data failed",
    316  1.6     blymn 		    __func__);
    317  1.6     blymn }
    318  1.6     blymn 
    319  1.6     blymn /*
    320  1.1     blymn  * Check the number of args we received are what we expect.  Return an
    321  1.1     blymn  * error if they do not match.
    322  1.1     blymn  */
    323  1.1     blymn int
    324  1.1     blymn check_arg_count(int nargs, int expected)
    325  1.1     blymn {
    326  1.1     blymn 	if (nargs != expected) {
    327  1.1     blymn 		report_count(1);
    328  1.1     blymn 		report_error("INCORRECT_ARGUMENT_NUMBER");
    329  1.1     blymn 		return(1);
    330  1.1     blymn 	}
    331  1.1     blymn 
    332  1.1     blymn 	return(0);
    333  1.1     blymn }
    334