t_rtable.sh revision 1.1
1 # $NetBSD: t_rtable.sh,v 1.1 2017/03/11 04:24:52 ozaki-r Exp $ 2 # 3 # Copyright (c) 2017 Internet Initiative Japan Inc. 4 # All rights reserved. 5 # 6 # Redistribution and use in source and binary forms, with or without 7 # modification, are permitted provided that the following conditions 8 # are met: 9 # 1. Redistributions of source code must retain the above copyright 10 # notice, this list of conditions and the following disclaimer. 11 # 2. Redistributions in binary form must reproduce the above copyright 12 # notice, this list of conditions and the following disclaimer in the 13 # documentation and/or other materials provided with the distribution. 14 # 15 # THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 16 # ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 17 # TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 18 # PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 19 # BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 20 # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 21 # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 22 # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 23 # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 24 # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 25 # POSSIBILITY OF SUCH DAMAGE. 26 # 27 28 SOCK1=unix://commsock1 29 SOCK2=unix://commsock2 30 SOCK3=unix://commsock3 31 IP1=10.0.0.1 32 IP2=10.0.0.2 33 34 DEBUG=${DEBUG:-false} 35 TIMEOUT=5 36 37 setup_endpoint() 38 { 39 local sock=${1} 40 local addr=${2} 41 local bus=${3} 42 local mode=${4} 43 44 rump_server_add_iface $sock shmif0 $bus 45 export RUMP_SERVER=${sock} 46 if [ $mode = "ipv6" ]; then 47 atf_check -s exit:0 rump.ifconfig shmif0 inet6 ${addr} 48 else 49 atf_check -s exit:0 rump.ifconfig shmif0 inet ${addr} netmask 0xffffff00 50 fi 51 52 atf_check -s exit:0 rump.ifconfig shmif0 up 53 $DEBUG && rump.ifconfig shmif0 54 } 55 56 setup_bridge_server() 57 { 58 59 rump_server_add_iface $SOCK2 shmif0 bus1 60 rump_server_add_iface $SOCK2 shmif1 bus2 61 export RUMP_SERVER=$SOCK2 62 atf_check -s exit:0 rump.ifconfig shmif0 up 63 atf_check -s exit:0 rump.ifconfig shmif1 up 64 } 65 66 setup() 67 { 68 69 rump_server_start $SOCK1 bridge 70 rump_server_start $SOCK2 bridge 71 rump_server_start $SOCK3 bridge 72 73 setup_endpoint $SOCK1 $IP1 bus1 ipv4 74 setup_endpoint $SOCK3 $IP2 bus2 ipv4 75 setup_bridge_server 76 } 77 78 setup_bridge() 79 { 80 81 export RUMP_SERVER=$SOCK2 82 atf_check -s exit:0 rump.ifconfig bridge0 create 83 atf_check -s exit:0 rump.ifconfig bridge0 up 84 85 export LD_PRELOAD=/usr/lib/librumphijack.so 86 atf_check -s exit:0 /sbin/brconfig bridge0 add shmif0 87 atf_check -s exit:0 /sbin/brconfig bridge0 add shmif1 88 /sbin/brconfig bridge0 89 unset LD_PRELOAD 90 rump.ifconfig shmif0 91 rump.ifconfig shmif1 92 } 93 94 get_number_of_caches() 95 { 96 97 export RUMP_SERVER=$SOCK2 98 export LD_PRELOAD=/usr/lib/librumphijack.so 99 echo $(($(/sbin/brconfig bridge0 |grep -A 100 "Address cache" |wc -l) - 1)) 100 unset LD_PRELOAD 101 } 102 103 104 atf_test_case bridge_rtable_basic cleanup 105 bridge_rtable_basic_head() 106 { 107 108 atf_set "descr" "Tests basic opearaions of bridge's learning table" 109 atf_set "require.progs" "rump_server" 110 } 111 112 bridge_rtable_basic_body() 113 { 114 local addr1= addr3= 115 116 setup 117 setup_bridge 118 119 # Get MAC addresses of the endpoints. 120 addr1=$(get_macaddr $SOCK1 shmif0) 121 addr3=$(get_macaddr $SOCK3 shmif0) 122 123 # Confirm there is no MAC address caches. 124 export RUMP_SERVER=$SOCK2 125 export LD_PRELOAD=/usr/lib/librumphijack.so 126 $DEBUG && /sbin/brconfig bridge0 127 atf_check -s exit:0 -o not-match:"$addr1" /sbin/brconfig bridge0 128 atf_check -s exit:0 -o not-match:"$addr3" /sbin/brconfig bridge0 129 unset LD_PRELOAD 130 131 # Make the bridge learn the MAC addresses of the endpoints. 132 export RUMP_SERVER=$SOCK1 133 atf_check -s exit:0 -o ignore rump.ping -n -w $TIMEOUT -c 1 $IP2 134 unset RUMP_SERVER 135 136 # Tests the addresses are in the cache. 137 export RUMP_SERVER=$SOCK2 138 export LD_PRELOAD=/usr/lib/librumphijack.so 139 $DEBUG && /sbin/brconfig bridge0 140 atf_check -s exit:0 -o match:"$addr1 shmif0" /sbin/brconfig bridge0 141 atf_check -s exit:0 -o match:"$addr3 shmif1" /sbin/brconfig bridge0 142 143 # Tests brconfig deladdr 144 atf_check -s exit:0 -o ignore /sbin/brconfig bridge0 deladdr "$addr1" 145 atf_check -s exit:0 -o not-match:"$addr1 shmif0" /sbin/brconfig bridge0 146 atf_check -s exit:0 -o ignore /sbin/brconfig bridge0 deladdr "$addr3" 147 atf_check -s exit:0 -o not-match:"$addr3 shmif1" /sbin/brconfig bridge0 148 unset LD_PRELOAD 149 150 rump_server_destroy_ifaces 151 } 152 153 bridge_rtable_basic_cleanup() 154 { 155 156 $DEBUG && dump 157 cleanup 158 } 159 160 161 atf_test_case bridge_rtable_flush cleanup 162 bridge_rtable_flush_head() 163 { 164 165 atf_set "descr" "Tests brconfig flush" 166 atf_set "require.progs" "rump_server" 167 } 168 169 bridge_rtable_flush_body() 170 { 171 local addr1= addr3= 172 173 setup 174 setup_bridge 175 176 # Get MAC addresses of the endpoints. 177 addr1=$(get_macaddr $SOCK1 shmif0) 178 addr3=$(get_macaddr $SOCK3 shmif0) 179 180 # Make the bridge learn the MAC addresses of the endpoints. 181 export RUMP_SERVER=$SOCK1 182 atf_check -s exit:0 -o ignore rump.ping -n -w $TIMEOUT -c 1 $IP2 183 unset RUMP_SERVER 184 185 # Tests the addresses are in the cache. 186 export RUMP_SERVER=$SOCK2 187 export LD_PRELOAD=/usr/lib/librumphijack.so 188 $DEBUG && /sbin/brconfig bridge0 189 atf_check -s exit:0 -o match:"$addr1 shmif0" /sbin/brconfig bridge0 190 atf_check -s exit:0 -o match:"$addr3 shmif1" /sbin/brconfig bridge0 191 192 # Tests brconfig flush. 193 atf_check -s exit:0 -o ignore /sbin/brconfig bridge0 flush 194 atf_check -s exit:0 -o not-match:"$addr1 shmif0" /sbin/brconfig bridge0 195 atf_check -s exit:0 -o not-match:"$addr3 shmif1" /sbin/brconfig bridge0 196 unset LD_PRELOAD 197 198 rump_server_destroy_ifaces 199 } 200 201 bridge_rtable_flush_cleanup() 202 { 203 204 $DEBUG && dump 205 cleanup 206 } 207 208 209 atf_test_case bridge_rtable_timeout cleanup 210 bridge_rtable_timeout_head() 211 { 212 213 atf_set "descr" "Tests cache timeout of bridge's learning table" 214 atf_set "require.progs" "rump_server" 215 } 216 217 bridge_rtable_timeout_body() 218 { 219 local addr1= addr3= 220 local timeout=5 221 222 setup 223 setup_bridge 224 225 # Get MAC addresses of the endpoints. 226 addr1=$(get_macaddr $SOCK1 shmif0) 227 addr3=$(get_macaddr $SOCK3 shmif0) 228 229 # Tests brconfig timeout. 230 export RUMP_SERVER=$SOCK2 231 export LD_PRELOAD=/usr/lib/librumphijack.so 232 atf_check -s exit:0 -o match:"timeout: 1200" /sbin/brconfig bridge0 233 atf_check -s exit:0 -o ignore /sbin/brconfig bridge0 timeout $timeout 234 atf_check -s exit:0 -o match:"timeout: $timeout" /sbin/brconfig bridge0 235 unset LD_PRELOAD 236 237 # Make the bridge learn the MAC addresses of the endpoints. 238 export RUMP_SERVER=$SOCK1 239 atf_check -s exit:0 -o ignore rump.ping -n -w $TIMEOUT -c 1 $IP2 240 unset RUMP_SERVER 241 242 # Tests the addresses are in the cache. 243 export RUMP_SERVER=$SOCK2 244 export LD_PRELOAD=/usr/lib/librumphijack.so 245 $DEBUG && /sbin/brconfig bridge0 246 atf_check -s exit:0 -o match:"$addr1 shmif0" /sbin/brconfig bridge0 247 atf_check -s exit:0 -o match:"$addr3 shmif1" /sbin/brconfig bridge0 248 249 # TODO: cache expiration 250 # The initial timeout value of a cache is changed to $timeout and 251 # after $timeout elapsed the cache is ready to be sweeped. However, 252 # the GC of rtable runs every 5 minutes and the cache remains until 253 # then. Should we have a sysctl to change the period? 254 255 #sleep $(($timeout + 2)) 256 # 257 ## Tests the addresses are not in the cache. 258 #export RUMP_SERVER=$SOCK2 259 #export LD_PRELOAD=/usr/lib/librumphijack.so 260 #$DEBUG && /sbin/brconfig bridge0 261 #atf_check -s exit:0 -o not-match:"$addr1 shmif0" /sbin/brconfig bridge0 262 #atf_check -s exit:0 -o not-match:"$addr3 shmif1" /sbin/brconfig bridge0 263 264 rump_server_destroy_ifaces 265 } 266 267 bridge_rtable_timeout_cleanup() 268 { 269 270 $DEBUG && dump 271 cleanup 272 } 273 274 275 atf_test_case bridge_rtable_maxaddr cleanup 276 bridge_rtable_maxaddr_head() 277 { 278 279 atf_set "descr" "Tests brconfig maxaddr" 280 atf_set "require.progs" "rump_server" 281 } 282 283 bridge_rtable_maxaddr_body() 284 { 285 local addr1= addr3= 286 287 setup 288 setup_bridge 289 290 # Get MAC addresses of the endpoints. 291 addr1=$(get_macaddr $SOCK1 shmif0) 292 addr3=$(get_macaddr $SOCK3 shmif0) 293 294 # Fill the MAC addresses of the endpoints. 295 export RUMP_SERVER=$SOCK1 296 atf_check -s exit:0 -o ignore rump.ping -n -w $TIMEOUT -c 1 $IP2 297 export RUMP_SERVER=$SOCK2 298 export LD_PRELOAD=/usr/lib/librumphijack.so 299 /sbin/brconfig bridge0 300 atf_check -s exit:0 -o match:"$addr1 shmif0" /sbin/brconfig bridge0 301 atf_check -s exit:0 -o match:"$addr3 shmif1" /sbin/brconfig bridge0 302 303 # Check the default # of caches is 100 304 atf_check -s exit:0 -o match:"max cache: 100" /sbin/brconfig bridge0 305 306 # Test two MAC addresses are cached 307 n=$(get_number_of_caches) 308 atf_check_equal $n 2 309 310 # Limit # of caches to one 311 atf_check -s exit:0 -o ignore /sbin/brconfig bridge0 maxaddr 1 312 atf_check -s exit:0 -o match:"max cache: 1" /sbin/brconfig bridge0 313 /sbin/brconfig bridge0 314 315 # Test just one address is cached 316 n=$(get_number_of_caches) 317 atf_check_equal $n 1 318 319 # Increase # of caches to two 320 atf_check -s exit:0 -o ignore /sbin/brconfig bridge0 maxaddr 2 321 atf_check -s exit:0 -o match:"max cache: 2" /sbin/brconfig bridge0 322 unset LD_PRELOAD 323 324 # Test we can cache two addresses again 325 export RUMP_SERVER=$SOCK1 326 atf_check -s exit:0 -o ignore rump.ping -n -w $TIMEOUT -c 1 $IP2 327 export RUMP_SERVER=$SOCK2 328 export LD_PRELOAD=/usr/lib/librumphijack.so 329 /sbin/brconfig bridge0 330 atf_check -s exit:0 -o match:"$addr1 shmif0" /sbin/brconfig bridge0 331 atf_check -s exit:0 -o match:"$addr3 shmif1" /sbin/brconfig bridge0 332 unset LD_PRELOAD 333 334 rump_server_destroy_ifaces 335 } 336 337 bridge_rtable_maxaddr_cleanup() 338 { 339 340 $DEBUG && dump 341 cleanup 342 } 343 344 345 atf_init_test_cases() 346 { 347 348 atf_add_test_case bridge_rtable_basic 349 atf_add_test_case bridge_rtable_flush 350 atf_add_test_case bridge_rtable_timeout 351 atf_add_test_case bridge_rtable_maxaddr 352 # TODO: brconfig static/flushall/discover/learn 353 } 354
Indexes created Thu Oct 23 22:10:10 GMT 2025