t_pppoe.sh revision 1.8
1 # $NetBSD: t_pppoe.sh,v 1.8 2016/10/26 03:55:56 knakahara Exp $ 2 # 3 # Copyright (c) 2016 Internet Initiative Japan Inc. 4 # All rights reserved. 5 # 6 # Redistribution and use in source and binary forms, with or without 7 # modification, are permitted provided that the following conditions 8 # are met: 9 # 1. Redistributions of source code must retain the above copyright 10 # notice, this list of conditions and the following disclaimer. 11 # 2. Redistributions in binary form must reproduce the above copyright 12 # notice, this list of conditions and the following disclaimer in the 13 # documentation and/or other materials provided with the distribution. 14 # 15 # THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 16 # ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 17 # TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 18 # PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 19 # BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 20 # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 21 # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 22 # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 23 # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 24 # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 25 # POSSIBILITY OF SUCH DAMAGE. 26 # 27 28 server="rump_server -lrump -lrumpnet -lrumpnet_net -lrumpnet_netinet \ 29 -lrumpnet_netinet6 -lrumpnet_shmif -lrumpdev \ 30 -lrumpnet_pppoe" 31 HIJACKING="env LD_PRELOAD=/usr/lib/librumphijack.so" 32 33 SERVER=unix://commsock1 34 CLIENT=unix://commsock2 35 36 SERVER_IP=10.3.3.1 37 CLIENT_IP=10.3.3.3 38 SERVER_IP6=fc00::1 39 CLIENT_IP6=fc00::3 40 AUTHNAME=foobar@baz.com 41 SECRET=oink 42 BUS=bus0 43 TIMEOUT=3 44 WAITTIME=5 45 DEBUG=false 46 47 setup() 48 { 49 inet=true 50 51 if [ $# -ne 0 ]; then 52 eval $@ 53 fi 54 55 atf_check -s exit:0 ${server} $SERVER 56 atf_check -s exit:0 ${server} $CLIENT 57 58 export RUMP_SERVER=$SERVER 59 atf_check -s exit:0 rump.ifconfig shmif0 create 60 atf_check -s exit:0 rump.ifconfig shmif0 linkstr $BUS 61 atf_check -s exit:0 rump.ifconfig shmif0 up 62 63 atf_check -s exit:0 rump.ifconfig pppoe0 create 64 $inet && atf_check -s exit:0 rump.ifconfig pppoe0 \ 65 inet $SERVER_IP $CLIENT_IP down 66 atf_check -s exit:0 rump.ifconfig pppoe0 link0 67 68 $DEBUG && rump.ifconfig 69 $DEBUG && $HIJACKING pppoectl -d pppoe0 70 71 atf_check -s exit:0 -x "$HIJACKING pppoectl -e shmif0 pppoe0" 72 unset RUMP_SERVER 73 74 export RUMP_SERVER=$CLIENT 75 atf_check -s exit:0 rump.ifconfig shmif0 create 76 atf_check -s exit:0 rump.ifconfig shmif0 linkstr $BUS 77 atf_check -s exit:0 rump.ifconfig shmif0 up 78 79 atf_check -s exit:0 rump.ifconfig pppoe0 create 80 $inet && atf_check -s exit:0 rump.ifconfig pppoe0 \ 81 inet 0.0.0.0 0.0.0.1 down 82 83 atf_check -s exit:0 -x "$HIJACKING pppoectl -e shmif0 pppoe0" 84 unset RUMP_SERVER 85 } 86 87 cleanup() 88 { 89 env RUMP_SERVER=$SERVER rump.halt 90 env RUMP_SERVER=$CLIENT rump.halt 91 } 92 93 94 wait_for_session_established() 95 { 96 local dontfail=$1 97 local n=$WAITTIME 98 99 for i in $(seq $n); do 100 $HIJACKING pppoectl -d pppoe0 |grep -q "state = session" 101 [ $? = 0 ] && return 102 sleep 1 103 done 104 105 if [ "$dontfail" != "dontfail" ]; then 106 atf_fail "Couldn't connect to the server for $n seconds." 107 fi 108 } 109 110 wait_for_disconnected() 111 { 112 local dontfail=$1 113 local n=$WAITTIME 114 115 for i in $(seq $n); do 116 $HIJACKING pppoectl -d pppoe0 | grep -q "state = session" 117 [ $? -eq 0 ] || return 118 sleep 1 119 done 120 121 if [ "$dontfail" != "dontfail" ]; then 122 atf_fail "Couldn't disconnect for $n seconds." 123 fi 124 } 125 126 run_test() 127 { 128 local auth=$1 129 setup 130 131 # As pppoe client doesn't support rechallenge yet. 132 local server_optparam="" 133 if [ $auth = "chap" ]; then 134 server_optparam="norechallenge" 135 fi 136 137 export RUMP_SERVER=$SERVER 138 local setup_serverparam="pppoectl pppoe0 hisauthproto=$auth \ 139 'hisauthname=$AUTHNAME' \ 140 'hisauthsecret=$SECRET' \ 141 'myauthproto=none' \ 142 $server_optparam" 143 atf_check -s exit:0 -x "$HIJACKING $setup_serverparam" 144 atf_check -s exit:0 rump.ifconfig pppoe0 up 145 unset RUMP_SERVER 146 147 export RUMP_SERVER=$CLIENT 148 local setup_clientparam="pppoectl pppoe0 myauthproto=$auth \ 149 'myauthname=$AUTHNAME' \ 150 'myauthsecret=$SECRET' \ 151 'hisauthproto=none'" 152 atf_check -s exit:0 -x "$HIJACKING $setup_clientparam" 153 atf_check -s exit:0 rump.ifconfig pppoe0 up 154 $DEBUG && rump.ifconfig 155 wait_for_session_established 156 atf_check -s exit:0 -o ignore rump.ping -c 1 -w $TIMEOUT $SERVER_IP 157 unset RUMP_SERVER 158 159 # test for disconnection from server 160 atf_check -s exit:0 -x "env RUMP_SERVER=$SERVER rump.ifconfig pppoe0 down" 161 export RUMP_SERVER=$CLIENT 162 atf_check -s not-exit:0 -o ignore -e ignore \ 163 rump.ping -c 1 -w $TIMEOUT $SERVER_IP 164 atf_check -s exit:0 -o match:'PADI sent' -x "$HIJACKING pppoectl -d pppoe0" 165 unset RUMP_SERVER 166 167 # test for recoonecting 168 atf_check -s exit:0 -x "env RUMP_SERVER=$SERVER rump.ifconfig pppoe0 up" 169 export RUMP_SERVER=$CLIENT 170 wait_for_session_established 171 atf_check -s exit:0 -o ignore rump.ping -c 1 -w $TIMEOUT $SERVER_IP 172 unset RUMP_SERVER 173 174 # test for disconnection from client 175 atf_check -s exit:0 -x "env RUMP_SERVER=$CLIENT rump.ifconfig pppoe0 down" 176 export RUMP_SERVER=$SERVER 177 $DEBUG && $HIJACKING pppoectl -d pppoe0 178 atf_check -s not-exit:0 -o ignore -e ignore \ 179 rump.ping -c 1 -w $TIMEOUT $CLIENT_IP 180 atf_check -s exit:0 -o match:'initial' -x "$HIJACKING pppoectl -d pppoe0" 181 unset RUMP_SERVER 182 183 # test for recconecting 184 export RUMP_SERVER=$CLIENT 185 atf_check -s exit:0 -x rump.ifconfig pppoe0 up 186 wait_for_session_established 187 $DEBUG && rump.ifconfig pppoe0 188 $DEBUG && $HIJACKING pppoectl -d pppoe0 189 unset RUMP_SERVER 190 191 export RUMP_SERVER=$SERVER 192 atf_check -s exit:0 -o ignore rump.ping -c 1 -w $TIMEOUT $CLIENT_IP 193 atf_check -s exit:0 -o match:'session' -x "$HIJACKING pppoectl -d pppoe0" 194 $DEBUG && HIJACKING pppoectl -d pppoe0 195 unset RUMP_SERVER 196 197 # test for invalid password 198 export RUMP_SERVER=$CLIENT 199 atf_check -s exit:0 rump.ifconfig pppoe0 down 200 local setup_clientparam="pppoectl pppoe0 myauthproto=$auth \ 201 'myauthname=$AUTHNAME' \ 202 'myauthsecret=invalidsecret' \ 203 'hisauthproto=none'" 204 atf_check -s exit:0 -x "$HIJACKING $setup_clientparam" 205 atf_check -s exit:0 rump.ifconfig pppoe0 up 206 wait_for_session_established dontfail 207 atf_check -s not-exit:0 -o ignore -e ignore \ 208 rump.ping -c 1 -w $TIMEOUT $SERVER_IP 209 atf_check -s exit:0 -o match:'initial' -x "$HIJACKING pppoectl -d pppoe0" 210 unset RUMP_SERVER 211 } 212 213 atf_test_case pppoe_pap cleanup 214 215 pppoe_pap_head() 216 { 217 atf_set "descr" "Does simple pap tests" 218 atf_set "require.progs" "rump_server pppoectl" 219 } 220 221 pppoe_pap_body() 222 { 223 run_test pap 224 } 225 226 pppoe_pap_cleanup() 227 { 228 cleanup 229 } 230 231 atf_test_case pppoe_chap cleanup 232 233 pppoe_chap_head() 234 { 235 atf_set "descr" "Does simple chap tests" 236 atf_set "require.progs" "rump_server pppoectl" 237 } 238 239 pppoe_chap_body() 240 { 241 run_test chap 242 } 243 244 pppoe_chap_cleanup() 245 { 246 cleanup 247 } 248 249 run_test6() 250 { 251 local auth=$1 252 setup "inet=false" 253 254 # As pppoe client doesn't support rechallenge yet. 255 local server_optparam="" 256 if [ $auth = "chap" ]; then 257 server_optparam="norechallenge" 258 fi 259 260 export RUMP_SERVER=$SERVER 261 local setup_serverparam="pppoectl pppoe0 hisauthproto=$auth \ 262 'hisauthname=$AUTHNAME' \ 263 'hisauthsecret=$SECRET' \ 264 'myauthproto=none' \ 265 $server_optparam" 266 atf_check -s exit:0 -x "$HIJACKING $setup_serverparam" 267 atf_check -s exit:0 rump.ifconfig pppoe0 inet6 $SERVER_IP6/64 down 268 atf_check -s exit:0 rump.ifconfig pppoe0 up 269 unset RUMP_SERVER 270 271 export RUMP_SERVER=$CLIENT 272 local setup_clientparam="pppoectl pppoe0 myauthproto=$auth \ 273 'myauthname=$AUTHNAME' \ 274 'myauthsecret=$SECRET' \ 275 'hisauthproto=none'" 276 atf_check -s exit:0 -x "$HIJACKING $setup_clientparam" 277 atf_check -s exit:0 rump.ifconfig pppoe0 inet6 $CLIENT_IP6/64 down 278 atf_check -s exit:0 rump.ifconfig pppoe0 up 279 $DEBUG && rump.ifconfig 280 wait_for_session_established 281 atf_check -s exit:0 -o ignore rump.ifconfig -w 10 282 export RUMP_SERVER=$SERVER 283 atf_check -s exit:0 -o ignore rump.ifconfig -w 10 284 export RUMP_SERVER=$CLIENT 285 atf_check -s exit:0 -o ignore rump.ping6 -c 1 -X $TIMEOUT $SERVER_IP6 286 unset RUMP_SERVER 287 288 # test for disconnection from server 289 export RUMP_SERVER=$SERVER 290 session_id=`$HIJACKING pppoectl -d pppoe0 | grep state` 291 atf_check -s exit:0 rump.ifconfig pppoe0 down 292 wait_for_disconnected 293 export RUMP_SERVER=$CLIENT 294 wait_for_disconnected 295 atf_check -s not-exit:0 -o ignore -e ignore \ 296 rump.ping6 -c 1 -w $TIMEOUT $SERVER_IP6 297 atf_check -s exit:0 -o not-match:"$session_id" -x "$HIJACKING pppoectl -d pppoe0" 298 unset RUMP_SERVER 299 300 # test for recoonecting 301 export RUMP_SERVER=$SERVER 302 atf_check -s exit:0 rump.ifconfig pppoe0 up 303 wait_for_session_established 304 atf_check -s exit:0 rump.ifconfig -w 10 305 $DEBUG && $HIJACKING pppoectl -d pppoe0 306 $DEBUG && rump.ifconfig pppoe0 307 export RUMP_SERVER=$CLIENT 308 atf_check -s exit:0 -o ignore rump.ifconfig -w 10 309 atf_check -s exit:0 -o ignore rump.ping6 -c 1 -X $TIMEOUT $SERVER_IP6 310 unset RUMP_SERVER 311 312 # test for disconnection from client 313 export RUMP_SERVER=$CLIENT 314 atf_check -s exit:0 rump.ifconfig pppoe0 down 315 wait_for_disconnected 316 317 export RUMP_SERVER=$SERVER 318 $DEBUG && $HIJACKING pppoectl -d pppoe0 319 wait_for_disconnected 320 atf_check -s not-exit:0 -o ignore -e ignore \ 321 rump.ping6 -c 1 -X $TIMEOUT $CLIENT_IP6 322 atf_check -s exit:0 -o match:'initial' -x "$HIJACKING pppoectl -d pppoe0" 323 unset RUMP_SERVER 324 325 # test for recconecting 326 export RUMP_SERVER=$CLIENT 327 atf_check -s exit:0 rump.ifconfig pppoe0 up 328 wait_for_session_established 329 atf_check -s exit:0 rump.ifconfig -w 10 330 331 $DEBUG && rump.ifconfig pppoe0 332 $DEBUG && $HIJACKING pppoectl -d pppoe0 333 unset RUMP_SERVER 334 335 export RUMP_SERVER=$SERVER 336 atf_check -s exit:0 -o ignore rump.ping6 -c 1 -X $TIMEOUT $CLIENT_IP6 337 atf_check -s exit:0 -o match:'session' -x "$HIJACKING pppoectl -d pppoe0" 338 $DEBUG && HIJACKING pppoectl -d pppoe0 339 unset RUMP_SERVER 340 341 # test for invalid password 342 export RUMP_SERVER=$CLIENT 343 atf_check -s exit:0 rump.ifconfig pppoe0 down 344 wait_for_disconnected 345 local setup_clientparam="pppoectl pppoe0 myauthproto=$auth \ 346 'myauthname=$AUTHNAME' \ 347 'myauthsecret=invalidsecret' \ 348 'hisauthproto=none'" 349 atf_check -s exit:0 -x "$HIJACKING $setup_clientparam" 350 atf_check -s exit:0 rump.ifconfig pppoe0 up 351 wait_for_session_established dontfail 352 atf_check -s not-exit:0 -o ignore -e ignore \ 353 rump.ping6 -c 1 -X $TIMEOUT $SERVER_IP6 354 atf_check -s exit:0 -o match:'DETACHED' rump.ifconfig pppoe0 355 unset RUMP_SERVER 356 } 357 358 atf_test_case pppoe6_pap cleanup 359 360 pppoe6_pap_head() 361 { 362 atf_set "descr" "Does simple pap using IPv6 tests" 363 atf_set "require.progs" "rump_server pppoectl" 364 } 365 366 pppoe6_pap_body() 367 { 368 run_test6 pap 369 } 370 371 pppoe6_pap_cleanup() 372 { 373 cleanup 374 } 375 376 atf_test_case pppoe6_chap cleanup 377 378 pppoe6_chap_head() 379 { 380 atf_set "descr" "Does simple chap using IPv6 tests" 381 atf_set "require.progs" "rump_server pppoectl" 382 } 383 384 pppoe6_chap_body() 385 { 386 run_test6 chap 387 } 388 389 pppoe6_chap_cleanup() 390 { 391 cleanup 392 } 393 394 atf_init_test_cases() 395 { 396 atf_add_test_case pppoe_pap 397 atf_add_test_case pppoe_chap 398 atf_add_test_case pppoe6_pap 399 atf_add_test_case pppoe6_chap 400 } 401
Indexes created Sun Oct 12 05:10:08 GMT 2025