t_vlan.sh revision 1.19
1 # $NetBSD: t_vlan.sh,v 1.19 2021/07/06 01:18:22 yamaguchi Exp $ 2 # 3 # Copyright (c) 2016 Internet Initiative Japan Inc. 4 # All rights reserved. 5 # 6 # Redistribution and use in source and binary forms, with or without 7 # modification, are permitted provided that the following conditions 8 # are met: 9 # 1. Redistributions of source code must retain the above copyright 10 # notice, this list of conditions and the following disclaimer. 11 # 2. Redistributions in binary form must reproduce the above copyright 12 # notice, this list of conditions and the following disclaimer in the 13 # documentation and/or other materials provided with the distribution. 14 # 15 # THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 16 # ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 17 # TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 18 # PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 19 # BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 20 # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 21 # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 22 # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 23 # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 24 # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 25 # POSSIBILITY OF SUCH DAMAGE. 26 # 27 28 BUS=bus 29 SOCK_LOCAL=unix://commsock1 30 SOCK_REMOTE=unix://commsock2 31 IP_LOCAL0=10.0.0.1 32 IP_LOCAL1=10.0.1.1 33 IP_REMOTE0=10.0.0.2 34 IP_REMOTE1=10.0.1.2 35 IP_MCADDR0=224.0.0.10 36 IP6_LOCAL0=fc00::1 37 IP6_LOCAL1=fc00:1::1 38 IP6_REMOTE0=fc00::2 39 IP6_REMOTE1=fc00:1::2 40 IP6_MCADDR0=ff11::10 41 ETH_IP_MCADDR0=01:00:5e:00:00:0a 42 ETH_IP6_MCADDR0=33:33:00:00:00:10 43 44 DEBUG=${DEBUG:-false} 45 46 vlan_create_destroy_body_common() 47 { 48 local atf_ifconfig="atf_check -s exit:0 rump.ifconfig" 49 50 export RUMP_SERVER=${SOCK_LOCAL} 51 52 $atf_ifconfig vlan0 create 53 $atf_ifconfig vlan0 destroy 54 55 $atf_ifconfig vlan0 create 56 $atf_ifconfig vlan0 up 57 $atf_ifconfig vlan0 down 58 $atf_ifconfig vlan0 destroy 59 60 $atf_ifconfig shmif0 create 61 $atf_ifconfig vlan0 create 62 $atf_ifconfig vlan0 vlan 1 vlanif shmif0 63 $atf_ifconfig vlan0 up 64 $atf_ifconfig vlan0 destroy 65 66 # more than one vlan interface with a same parent interface 67 $atf_ifconfig shmif1 create 68 $atf_ifconfig vlan0 create 69 $atf_ifconfig vlan0 vlan 10 vlanif shmif0 70 $atf_ifconfig vlan1 create 71 $atf_ifconfig vlan1 vlan 11 vlanif shmif0 72 73 # more than one interface with another parent interface 74 $atf_ifconfig vlan2 create 75 $atf_ifconfig vlan2 vlan 12 vlanif shmif1 76 $atf_ifconfig vlan3 create 77 $atf_ifconfig vlan3 vlan 13 vlanif shmif1 78 $atf_ifconfig shmif0 destroy 79 atf_check -s exit:0 -o not-match:'shmif0' rump.ifconfig vlan0 80 atf_check -s exit:0 -o not-match:'shmif0' rump.ifconfig vlan1 81 atf_check -s exit:0 -o match:'shmif1' rump.ifconfig vlan2 82 atf_check -s exit:0 -o match:'shmif1' rump.ifconfig vlan3 83 $atf_ifconfig vlan0 destroy 84 $atf_ifconfig vlan1 destroy 85 $atf_ifconfig vlan2 destroy 86 $atf_ifconfig vlan3 destroy 87 88 } 89 90 atf_test_case vlan_create_destroy cleanup 91 vlan_create_destroy_head() 92 { 93 94 atf_set "descr" "tests of creation and deletion of vlan interface" 95 atf_set "require.progs" "rump_server" 96 } 97 98 vlan_create_destroy_body() 99 { 100 rump_server_start $SOCK_LOCAL vlan 101 102 vlan_create_destroy_body_common 103 } 104 105 106 vlan_create_destroy_cleanup() 107 { 108 109 $DEBUG && dump 110 cleanup 111 } 112 113 atf_test_case vlan_create_destroy6 cleanup 114 vlan_create_destroy6_head() 115 { 116 117 atf_set "descr" "tests of creation and deletion of vlan interface with IPv6" 118 atf_set "require.progs" "rump_server" 119 } 120 121 vlan_create_destroy6_body() 122 { 123 124 rump_server_start $SOCK_LOCAL vlan netinet6 125 126 vlan_create_destroy_body_common 127 } 128 129 vlan_create_destroy6_cleanup() 130 { 131 132 $DEBUG && dump 133 cleanup 134 } 135 136 vlan_basic_body_common() 137 { 138 local atf_ifconfig="atf_check -s exit:0 rump.ifconfig" 139 local outfile=./out 140 local af=inet 141 local prefix=24 142 local local0=$IP_LOCAL0 143 local remote0=$IP_REMOTE0 144 local ping_cmd="rump.ping -n -w 1 -c 1" 145 146 if [ x"$1" = x"inet6" ]; then 147 af="inet6" 148 prefix=64 149 local0=$IP6_LOCAL0 150 remote0=$IP6_REMOTE0 151 ping_cmd="rump.ping6 -n -c 1" 152 fi 153 154 rump_server_add_iface $SOCK_LOCAL shmif0 $BUS 155 rump_server_add_iface $SOCK_REMOTE shmif0 $BUS 156 157 export RUMP_SERVER=$SOCK_LOCAL 158 $atf_ifconfig shmif0 up 159 export RUMP_SERVER=$SOCK_REMOTE 160 $atf_ifconfig shmif0 up 161 162 export RUMP_SERVER=$SOCK_LOCAL 163 $atf_ifconfig vlan0 create 164 $atf_ifconfig vlan0 vlan 10 vlanif shmif0 165 $atf_ifconfig vlan0 $af $local0/$prefix 166 $atf_ifconfig vlan0 up 167 $atf_ifconfig -w 10 168 169 export RUMP_SERVER=$SOCK_REMOTE 170 $atf_ifconfig vlan0 create 171 $atf_ifconfig vlan0 vlan 10 vlanif shmif0 172 $atf_ifconfig vlan0 $af $remote0/$prefix 173 $atf_ifconfig vlan0 up 174 $atf_ifconfig -w 10 175 176 extract_new_packets $BUS > $outfile 177 178 export RUMP_SERVER=$SOCK_LOCAL 179 atf_check -s exit:0 -o ignore $ping_cmd $remote0 180 181 extract_new_packets $BUS > $outfile 182 atf_check -s exit:0 -o match:'vlan 10' cat $outfile 183 184 $atf_ifconfig vlan0 -vlanif 185 $atf_ifconfig vlan0 vlan 20 vlanif shmif0 186 $atf_ifconfig vlan0 $af $local0/$prefix 187 $atf_ifconfig vlan0 up 188 $atf_ifconfig -w 10 189 190 extract_new_packets $BUS > $outfile 191 atf_check -s not-exit:0 -o ignore $ping_cmd $remote0 192 193 extract_new_packets $BUS > $outfile 194 atf_check -s exit:0 -o match:'vlan 20' cat $outfile 195 196 export RUMP_SERVER=$SOCK_LOCAL 197 $atf_ifconfig vlan0 -vlanif 198 $atf_ifconfig vlan0 vlan 10 vlanif shmif0 199 $atf_ifconfig vlan0 $af $local0/$prefix 200 $atf_ifconfig vlan0 up 201 $atf_ifconfig -w 10 202 203 atf_check -s exit:0 -o ignore rump.ifconfig -z vlan0 204 atf_check -s exit:0 -o ignore $ping_cmd $remote0 205 rump.ifconfig -v vlan0 > $outfile 206 207 atf_check -s exit:0 -o not-match:' 0 packets' cat $outfile 208 atf_check -s exit:0 -o not-match:' 0 bytes' cat $outfile 209 } 210 211 atf_test_case vlan_basic cleanup 212 vlan_basic_head() 213 { 214 215 atf_set "descr" "tests of communications over vlan interfaces" 216 atf_set "require.progs" "rump_server" 217 } 218 219 vlan_basic_body() 220 { 221 rump_server_start $SOCK_LOCAL vlan 222 rump_server_start $SOCK_REMOTE vlan 223 224 vlan_basic_body_common inet 225 226 } 227 228 vlan_basic_cleanup() 229 { 230 231 $DEBUG && dump 232 cleanup 233 } 234 235 atf_test_case vlan_basic6 cleanup 236 vlan_basic6_head() 237 { 238 239 atf_set "descr" "tests of communications over vlan interfaces using IPv6" 240 atf_set "require.progs" "rump_server" 241 } 242 243 vlan_basic6_body() 244 { 245 rump_server_start $SOCK_LOCAL vlan netinet6 246 rump_server_start $SOCK_REMOTE vlan netinet6 247 248 vlan_basic_body_common inet6 249 } 250 251 vlan_basic6_cleanup() 252 { 253 254 $DEBUG && dump 255 cleanup 256 } 257 258 vlan_auto_follow_mtu_body_common() 259 { 260 local atf_ifconfig="atf_check -s exit:0 rump.ifconfig" 261 local outfile=./out 262 local af=inet 263 local prefix=24 264 local local0=$IP_LOCAL0 265 local remote0=$IP_REMOTE0 266 local ping_cmd="rump.ping -D -n -w 1 -c 1" 267 local mtu=1500 268 local vlan_mtu=`expr $mtu - 4` 269 # ipv4 header=20bytes, icmp header=8bytes 270 local padding=`expr $vlan_mtu - 20 - 8` 271 local over_padding=`expr $vlan_mtu - 20 - 8 + 1` 272 local nonfrag_msg="$local0 > $remote0: ICMP echo request" 273 # unused for ipv4 274 local frag_msg="" 275 276 if [ x"$1" = x"inet6" ]; then 277 af="inet6" 278 prefix=64 279 local0=$IP6_LOCAL0 280 remote0=$IP6_REMOTE0 281 # ipv6 header=40bytes, icmpv6 header=8bytes 282 padding=`expr $vlan_mtu - 40 - 8` 283 over_padding=`expr $vlan_mtu - 40 - 8 + 1` 284 ping_cmd="rump.ping6 -mm -n -c 1 -i 1" 285 nonfrag_msg="$local0 > $remote0: ICMP6, echo request" 286 frag_msg="$local0 > $remote0: frag .* ICMP6, echo request" 287 fi 288 289 rump_server_add_iface $SOCK_LOCAL shmif0 $BUS 290 rump_server_add_iface $SOCK_REMOTE shmif0 $BUS 291 292 export RUMP_SERVER=$SOCK_LOCAL 293 $atf_ifconfig shmif0 up 294 export RUMP_SERVER=$SOCK_REMOTE 295 $atf_ifconfig shmif0 up 296 297 export RUMP_SERVER=$SOCK_LOCAL 298 $atf_ifconfig vlan0 create 299 300 # since upper bound of shmif's mtu is 1500, 301 # so we lower vlan's mtu instead of raising shmif's. 302 # to do this, we change the interface's parameter 303 # such as ND_IFINFO(ifp)->maxmtu that is changed by SIOCSIFMTU. 304 305 # $atf_config shmif0 mtu 1600 306 $atf_ifconfig vlan0 vlan 10 vlanif shmif0 307 $atf_ifconfig vlan0 mtu 1400 308 $atf_ifconfig vlan0 -vlanif shmif0 309 310 $atf_ifconfig vlan0 vlan 10 vlanif shmif0 311 $atf_ifconfig vlan0 $af $local0/$prefix 312 $atf_ifconfig vlan0 up 313 $atf_ifconfig -w 10 314 315 export RUMP_SERVER=$SOCK_REMOTE 316 $atf_ifconfig vlan0 create 317 $atf_ifconfig vlan0 vlan 10 vlanif shmif0 318 $atf_ifconfig vlan0 $af $remote0/$prefix 319 $atf_ifconfig vlan0 up 320 $atf_ifconfig -w 10 321 322 extract_new_packets $BUS > $outfile 323 export RUMP_SERVER=$SOCK_LOCAL 324 325 atf_check -s exit:0 -o ignore $ping_cmd -s $padding $remote0 326 extract_new_packets $BUS > $outfile 327 atf_check -s exit:0 -o match:"$nonfrag_msg" cat $outfile 328 329 if [ x"$1" = x"inet6" ]; then 330 atf_check -s exit:0 -o ignore $ping_cmd -s $over_padding $remote0 331 extract_new_packets $BUS > $outfile 332 atf_check -s exit:0 -o match:"$frag_msg" cat $outfile 333 else 334 atf_check -s not-exit:0 -o ignore -e match:"Message too long" \ 335 $ping_cmd -s $over_padding $remote0 336 fi 337 } 338 339 atf_test_case vlan_auto_follow_mtu cleanup 340 vlan_auto_follow_mtu_head() 341 { 342 343 atf_set "descr" "tests of setting vlan mtu using IPv4" 344 atf_set "require.progs" "rump_server" 345 } 346 347 vlan_auto_follow_mtu_body() 348 { 349 rump_server_start $SOCK_LOCAL vlan 350 rump_server_start $SOCK_REMOTE vlan 351 352 vlan_auto_follow_mtu_body_common inet 353 } 354 355 vlan_auto_follow_mtu_cleanup() 356 { 357 358 $DEBUG && dump 359 cleanup 360 } 361 362 atf_test_case vlan_auto_follow_mtu6 cleanup 363 vlan_auto_follow_mtu6_head() 364 { 365 366 atf_set "descr" "tests of setting vlan mtu using IPv6" 367 atf_set "require.progs" "rump_server" 368 } 369 370 vlan_auto_follow_mtu6_body() 371 { 372 rump_server_start $SOCK_LOCAL vlan netinet6 373 rump_server_start $SOCK_REMOTE vlan netinet6 374 375 vlan_auto_follow_mtu_body_common inet6 376 } 377 378 vlan_auto_follow_mtu6_cleanup() 379 { 380 381 $DEBUG && dump 382 cleanup 383 } 384 385 vlanid_config_and_ping() 386 { 387 local atf_ifconfig="atf_check -s exit:0 rump.ifconfig" 388 local vlanid=$1 389 shift 390 391 export RUMP_SERVER=$SOCK_LOCAL 392 $atf_ifconfig vlan0 vlan $vlanid vlanif shmif0 393 $atf_ifconfig vlan0 $IP_LOCAL0/24 394 $atf_ifconfig vlan0 up 395 396 export RUMP_SERVER=$SOCK_REMOTE 397 $atf_ifconfig vlan0 vlan $vlanid vlanif shmif0 398 $atf_ifconfig vlan0 $IP_REMOTE0/24 399 $atf_ifconfig vlan0 up 400 401 export RUMP_SERVER=$SOCK_LOCAL 402 atf_check -s exit:0 -o ignore rump.ping -n -w 1 -c 1 $IP_REMOTE0 403 $atf_ifconfig vlan0 -vlanif 404 405 export RUMP_SERVER=$SOCK_REMOTE 406 $atf_ifconfig vlan0 -vlanif 407 } 408 409 vlanid_config_and_ping6() 410 { 411 local atf_ifconfig="atf_check -s exit:0 rump.ifconfig" 412 local vlanid=$1 413 shift 414 415 export RUMP_SERVER=$SOCK_LOCAL 416 $atf_ifconfig vlan0 vlan $vlanid vlanif shmif0 417 $atf_ifconfig vlan0 inet6 $IP6_LOCAL0/64 418 $atf_ifconfig vlan0 up 419 420 export RUMP_SERVER=$SOCK_REMOTE 421 $atf_ifconfig vlan0 vlan $vlanid vlanif shmif0 422 $atf_ifconfig vlan0 inet6 $IP6_REMOTE0/64 423 $atf_ifconfig vlan0 up 424 425 export RUMP_SERVER=$SOCK_LOCAL 426 atf_check -s exit:0 -o ignore rump.ping6 -n -c 1 $IP6_REMOTE0 427 $atf_ifconfig vlan0 -vlanif 428 429 export RUMP_SERVER=$SOCK_REMOTE 430 $atf_ifconfig vlan0 -vlanif 431 } 432 433 vlan_vlanid_body_common() 434 { 435 local atf_ifconfig="atf_check -s exit:0 rump.ifconfig" 436 local af=inet 437 local prefix=24 438 local sysctl_param="net.inet.ip.dad_count=0" 439 local ping_cmd="rump.ping -n -w 1 -c 1" 440 local config_and_ping=vlanid_config_and_ping 441 local local0=$IP_LOCAL0 442 local local1=$IP_LOCAL1 443 local remote0=$IP_REMOTE0 444 local remote1=$IP_REMOTE1 445 446 if [ x"$1" = x"inet6" ]; then 447 af=inet6 448 prefix=64 449 sysctl_param="net.inet6.ip6.dad_count=0" 450 ping_cmd="rump.ping6 -n -c 1" 451 config_and_ping=vlanid_config_and_ping6 452 local0=$IP6_LOCAL0 453 local1=$IP6_LOCAL1 454 remote0=$IP6_REMOTE0 455 remote1=$IP6_REMOTE1 456 fi 457 458 rump_server_add_iface $SOCK_LOCAL shmif0 $BUS 459 rump_server_add_iface $SOCK_REMOTE shmif0 $BUS 460 461 export RUMP_SERVER=$SOCK_LOCAL 462 atf_check -s exit:0 -o ignore rump.sysctl -w $sysctl_param 463 $atf_ifconfig shmif0 up 464 $atf_ifconfig vlan0 create 465 466 export RUMP_SERVER=$SOCK_REMOTE 467 atf_check -s exit:0 -o ignore rump.sysctl -w $sysctl_param 468 $atf_ifconfig shmif0 up 469 $atf_ifconfig vlan0 create 470 471 export RUMP_SERVER=$SOCK_LOCAL 472 atf_check -s not-exit:0 -e match:"^usage: rump.ifconfig" \ 473 rump.ifconfig vlan0 vlan -1 vlanif shmif0 474 475 # $config_and_ping 0 # reserved vlan id 476 $config_and_ping 1 477 $config_and_ping 4094 478 # $config_and_ping 4095 #reserved vlan id 479 480 if [ "${RANDOM:-0}" != "${RANDOM:-0}" ] 481 then 482 for TAG in $(( ${RANDOM:-0} % 4092 + 2 )) \ 483 $(( ${RANDOM:-0} % 4092 + 2 )) \ 484 $(( ${RANDOM:-0} % 4092 + 2 )) 485 do 486 $config_and_ping "${TAG}" 487 done 488 fi 489 490 export RUMP_SERVER=$SOCK_LOCAL 491 for TAG in 0 4095 4096 $((4096*4 + 1)) 65536 65537 $((65536 + 4095)) 492 do 493 atf_check -s not-exit:0 -e not-empty \ 494 rump.ifconfig vlan0 vlan "${TAG}" vlanif shmif0 495 done 496 497 $atf_ifconfig vlan0 vlan 1 vlanif shmif0 498 atf_check -s not-exit:0 -e match:"SIOCSETVLAN: Device busy" \ 499 rump.ifconfig vlan0 vlan 2 vlanif shmif0 500 501 atf_check -s not-exit:0 -e match:"SIOCSETVLAN: Device busy" \ 502 rump.ifconfig vlan0 vlan 1 vlanif shmif1 503 504 $atf_ifconfig vlan0 -vlanif 505 atf_check -s not-exit:0 -e match:"Invalid argument" \ 506 rump.ifconfig vlan0 $af $local0/$prefix 507 508 export RUMP_SERVER=$SOCK_LOCAL 509 $atf_ifconfig vlan0 vlan 10 vlanif shmif0 510 $atf_ifconfig vlan0 $af $local0/$prefix 511 $atf_ifconfig vlan0 up 512 $atf_ifconfig vlan1 create 513 $atf_ifconfig vlan1 vlan 11 vlanif shmif0 514 $atf_ifconfig vlan1 $af $local1/$prefix 515 $atf_ifconfig vlan1 up 516 517 export RUMP_SERVER=$SOCK_REMOTE 518 $atf_ifconfig vlan0 -vlanif 519 $atf_ifconfig vlan0 vlan 10 vlanif shmif0 520 $atf_ifconfig vlan0 $af $remote0/$prefix 521 $atf_ifconfig vlan0 up 522 $atf_ifconfig vlan1 create 523 $atf_ifconfig vlan1 vlan 11 vlanif shmif0 524 $atf_ifconfig vlan1 $af $remote1/$prefix 525 $atf_ifconfig vlan1 up 526 527 export RUMP_SERVER=$SOCK_LOCAL 528 atf_check -s exit:0 -o ignore $ping_cmd $remote0 529 atf_check -s exit:0 -o ignore $ping_cmd $remote1 530 } 531 532 atf_test_case vlan_vlanid cleanup 533 vlan_vlanid_head() 534 { 535 536 atf_set "descr" "tests of configuration for vlan id" 537 atf_set "require.progs" "rump_server" 538 } 539 540 vlan_vlanid_body() 541 { 542 rump_server_start $SOCK_LOCAL vlan 543 rump_server_start $SOCK_REMOTE vlan 544 545 vlan_vlanid_body_common inet 546 } 547 548 vlan_vlanid_cleanup() 549 { 550 551 $DEBUG && dump 552 cleanup 553 } 554 555 atf_test_case vlan_vlanid6 cleanup 556 vlan_vlanid6_head() 557 { 558 559 atf_set "descr" "tests of configuration for vlan id using IPv6" 560 atf_set "require.progs" "rump_server" 561 } 562 563 564 vlan_vlanid6_body() 565 { 566 rump_server_start $SOCK_LOCAL vlan netinet6 567 rump_server_start $SOCK_REMOTE vlan netinet6 568 569 vlan_vlanid_body_common inet6 570 } 571 572 vlan_vlanid6_cleanup() 573 { 574 575 $DEBUG && dump 576 cleanup 577 } 578 579 vlan_configs_body_common() 580 { 581 local atf_ifconfig="atf_check -s exit:0 rump.ifconfig" 582 583 export RUMP_SERVER=${SOCK_LOCAL} 584 585 $atf_ifconfig shmif0 create 586 $atf_ifconfig shmif1 create 587 # unset U/L bit to detect a bug fixed by if_vlan.c:r1.132 588 $atf_ifconfig shmif0 link b0:a0:75:00:01:00 active 589 $atf_ifconfig shmif1 link b0:a0:75:00:01:01 active 590 $atf_ifconfig vlan0 create 591 592 atf_check -s exit:0 -o match:'status: +down' \ 593 rump.ifconfig vlan0 594 $atf_ifconfig vlan0 vlan 10 vlanif shmif0 595 $atf_ifconfig vlan0 -vlanif 596 atf_check -s exit:0 -o match:'status: +down' \ 597 rump.ifconfig vlan0 598 599 $atf_ifconfig vlan0 vlan 10 vlanif shmif0 600 $atf_ifconfig vlan0 -vlanif shmif0 601 602 $atf_ifconfig vlan0 vlan 10 vlanif shmif0 603 atf_check -s exit:0 rump.ifconfig vlan0 -vlanif shmif1 604 atf_check -s exit:0 rump.ifconfig vlan0 -vlanif shmif2 605 606 $atf_ifconfig vlan0 -vlanif 607 608 $atf_ifconfig vlan0 vlan 10 vlanif shmif0 609 atf_check -s exit:0 -e match:'Invalid argument' \ 610 rump.ifconfig vlan0 mtu 1497 611 $atf_ifconfig vlan0 mtu 1496 612 $atf_ifconfig vlan0 mtu 42 613 atf_check -s exit:0 -e match:'Invalid argument' \ 614 rump.ifconfig vlan0 mtu 41 615 $atf_ifconfig vlan0 -vlanif 616 617 $atf_ifconfig vlan1 create 618 $atf_ifconfig vlan0 vlan 10 vlanif shmif0 619 atf_check -s not-exit:0 -e match:'File exists' \ 620 rump.ifconfig vlan1 vlan 10 vlanif shmif0 621 $atf_ifconfig vlan1 vlan 10 vlanif shmif1 622 623 $atf_ifconfig vlan1 -vlanif shmif1 624 $atf_ifconfig vlan1 vlan 10 vlanif shmif1 625 626 $atf_ifconfig vlan0 -vlanif shmif0 627 $atf_ifconfig vlan0 vlan 10 vlanif shmif0 628 } 629 630 atf_test_case vlan_configs cleanup 631 vlan_configs_head() 632 { 633 atf_set "descr" "tests of configuration except vlan id" 634 atf_set "require.progs" "rump_server" 635 } 636 637 vlan_configs_body() 638 { 639 640 rump_server_start $SOCK_LOCAL vlan 641 642 vlan_configs_body_common 643 644 } 645 646 vlan_configs_cleanup() 647 { 648 649 $DEBUG && dump 650 cleanup 651 } 652 653 atf_test_case vlan_configs6 cleanup 654 vlan_configs6_head() 655 { 656 atf_set "descr" "tests of configuration except vlan id using IPv6" 657 atf_set "require.progs" "rump_server" 658 } 659 660 vlan_configs6_body() 661 { 662 rump_server_start $SOCK_LOCAL vlan netinet6 663 664 vlan_configs_body_common 665 } 666 667 vlan_configs6_cleanup() 668 { 669 $DEBUG && dump 670 cleanup 671 } 672 673 vlan_bridge_body_common() 674 { 675 local atf_ifconfig="atf_check -s exit:0 rump.ifconfig" 676 local atf_brconfig="atf_check -s exit:0 $HIJACKING /sbin/brconfig" 677 678 rump_server_add_iface $SOCK_LOCAL shmif0 $BUS 679 680 export RUMP_SERVER=$SOCK_LOCAL 681 $atf_ifconfig shmif0 up 682 683 $atf_ifconfig vlan0 create 684 $atf_ifconfig vlan0 vlan 10 vlanif shmif0 685 $atf_ifconfig vlan0 up 686 $DEBUG && rump.ifconfig vlan0 687 688 $atf_ifconfig bridge0 create 689 $atf_ifconfig bridge0 up 690 691 # 692 # Add vlan to bridge member 693 # 694 $atf_ifconfig bridge0 mtu 1496 695 atf_check -s exit:0 -o match:'mtu 1496' rump.ifconfig vlan0 696 697 $atf_brconfig bridge0 add vlan0 698 $DEBUG && brconfig bridge0 699 $atf_brconfig bridge0 delete vlan0 700 701 # 702 # decrease MTU on adding to bridge member 703 # 704 $atf_ifconfig bridge0 mtu 1495 705 atf_check -s exit:0 -o match:'mtu 1496' rump.ifconfig vlan0 706 707 $atf_brconfig bridge0 add vlan0 708 $DEBUG && brconfig bridge0 709 atf_check -s exit:0 -o match:'mtu 1495' rump.ifconfig vlan0 710 $atf_brconfig bridge0 delete vlan0 711 712 # 713 # increase MTU on adding to bridge member 714 # 715 $atf_ifconfig bridge0 mtu 1496 716 $atf_ifconfig vlan0 mtu 1495 717 $atf_brconfig bridge0 add vlan0 718 719 $DEBUG && brconfig bridge0 720 atf_check -s exit:0 -o match:'mtu 1496' rump.ifconfig vlan0 721 $atf_brconfig bridge0 delete vlan0 722 723 $atf_ifconfig bridge0 mtu 1497 724 atf_check -s not-exit:0 -o ignore -e ignore \ 725 /sbin/brconfig bridge0 add vlan0 726 727 # 728 # Destroy a vlan interface that is bridge member 729 # 730 $atf_ifconfig bridge0 mtu 1496 731 $atf_brconfig bridge0 add vlan0 732 $atf_ifconfig vlan0 destroy 733 734 rump_server_destroy_ifaces 735 } 736 737 atf_test_case vlan_bridge cleanup 738 vlan_bridge_head() 739 { 740 741 atf_set "descr" "tests of vlan interfaces with bridges (IPv4)" 742 atf_set "require.progs" "rump_server" 743 } 744 745 vlan_bridge_body() 746 { 747 748 rump_server_start $SOCK_LOCAL vlan bridge 749 vlan_bridge_body_common 750 } 751 752 vlan_bridge_cleanup() 753 { 754 755 $DEBUG && dump 756 cleanup 757 } 758 759 atf_test_case vlan_bridge6 cleanup 760 vlan_bridge6_head() 761 { 762 763 atf_set "descr" "tests of vlan interfaces with bridges (IPv6)" 764 atf_set "require.progs" "rump_server" 765 } 766 767 vlan_bridge6_body() 768 { 769 770 rump_server_start $SOCK_LOCAL vlan netinet6 bridge 771 vlan_bridge_body_common 772 } 773 774 vlan_bridge6_cleanup() 775 { 776 777 $DEBUG && dump 778 cleanup 779 } 780 781 vlan_multicast_body_common() 782 { 783 local atf_ifconfig="atf_check -s exit:0 rump.ifconfig" 784 local af="inet" 785 local local0=$IP_LOCAL0 786 local local1=$IP_LOCAL1 787 local mcaddr=$IP_MCADDR0 788 local eth_mcaddr=$ETH_IP_MCADDR0 789 local prefix=24 790 local siocXmulti="$(atf_get_srcdir)/siocXmulti" 791 local atf_siocXmulti="atf_check -s exit:0 $HIJACKING $siocXmulti" 792 793 if [ x"$1" = x"inet6" ]; then 794 af="inet6" 795 prefix=64 796 local0=$IP6_LOCAL0 797 local1=$IP6_LOCAL1 798 mcaddr=$IP6_MCADDR0 799 eth_mcaddr=$ETH_IP6_MCADDR0 800 fi 801 802 export RUMP_SERVER=$SOCK_LOCAL 803 804 $atf_ifconfig shmif0 create 805 $atf_ifconfig shmif0 linkstr net0 up 806 $atf_ifconfig vlan0 create 807 $atf_ifconfig vlan0 vlan 10 vlanif shmif0 808 $atf_ifconfig vlan0 $af $local0/$prefix up 809 $atf_ifconfig vlan1 create 810 $atf_ifconfig vlan1 vlan 11 vlanif shmif0 811 $atf_ifconfig vlan1 $af $local1/$prefix up 812 $atf_ifconfig -w 10 813 814 # check the initial state 815 atf_check -s exit:0 -o not-match:"$eth_mcaddr" $HIJACKING ifmcstat 816 817 # add a multicast address 818 $atf_siocXmulti add vlan0 $mcaddr 819 atf_check -s exit:0 -o match:"$eth_mcaddr" $HIJACKING ifmcstat 820 821 # delete the address 822 $atf_siocXmulti del vlan0 $mcaddr 823 atf_check -s exit:0 -o not-match:"$eth_mcaddr" $HIJACKING ifmcstat 824 825 # delete a non-existing address 826 atf_check -s not-exit:0 -e match:"Invalid argument" \ 827 $HIJACKING $siocXmulti del vlan0 $mcaddr 828 829 # add an address to different interfaces 830 $atf_siocXmulti add vlan0 $mcaddr 831 $atf_siocXmulti add vlan1 $mcaddr 832 atf_check -s exit:0 -o match:"${eth_mcaddr} refcount 2" $HIJACKING ifmcstat 833 $atf_siocXmulti del vlan0 $mcaddr 834 835 # delete the address with invalid interface 836 atf_check -s not-exit:0 -e match:"Invalid argument" \ 837 $HIJACKING $siocXmulti del vlan0 $mcaddr 838 839 $atf_siocXmulti del vlan1 $mcaddr 840 841 # add and delete a same address more than once 842 $atf_siocXmulti add vlan0 $mcaddr 843 $atf_siocXmulti add vlan0 $mcaddr 844 $atf_siocXmulti add vlan0 $mcaddr 845 atf_check -s exit:0 -o match:"${eth_mcaddr} refcount 3" $HIJACKING ifmcstat 846 $atf_siocXmulti del vlan0 $mcaddr 847 $atf_siocXmulti del vlan0 $mcaddr 848 $atf_siocXmulti del vlan0 $mcaddr 849 atf_check -s exit:0 -o not-match:"$eth_mcaddr" $HIJACKING ifmcstat 850 851 # delete all address added to parent device when remove 852 # the config of parent interface 853 $atf_siocXmulti add vlan0 $mcaddr 854 $atf_siocXmulti add vlan0 $mcaddr 855 $atf_siocXmulti add vlan0 $mcaddr 856 $atf_ifconfig vlan0 -vlanif shmif0 857 atf_check -s exit:0 -o not-match:"$eth_mcaddr" $HIJACKING ifmcstat 858 } 859 860 atf_test_case vlan_multicast cleanup 861 vlan_multicast_head() 862 { 863 atf_set "descr" "tests of multicast address adding and deleting" 864 atf_set "require.progs" "rump_server" 865 } 866 867 vlan_multicast_body() 868 { 869 rump_server_start $SOCK_LOCAL vlan 870 871 vlan_multicast_body_common inet 872 } 873 874 vlan_multicast_cleanup() 875 { 876 $DEBUG && dump 877 cleanup 878 } 879 880 atf_test_case vlan_multicast6 cleanup 881 vlan_multicast6_head() 882 { 883 atf_set "descr" "tests of multicast address adding and deleting with IPv6" 884 atf_set "require.progs" "rump_server" 885 } 886 887 vlan_multicast6_body() 888 { 889 rump_server_start $SOCK_LOCAL vlan netinet6 890 891 vlan_multicast_body_common inet6 892 } 893 894 vlan_multicast6_cleanup() 895 { 896 $DEBUG && dump 897 cleanup 898 } 899 900 atf_init_test_cases() 901 { 902 903 atf_add_test_case vlan_create_destroy 904 atf_add_test_case vlan_basic 905 atf_add_test_case vlan_auto_follow_mtu 906 atf_add_test_case vlan_vlanid 907 atf_add_test_case vlan_configs 908 atf_add_test_case vlan_bridge 909 atf_add_test_case vlan_multicast 910 911 atf_add_test_case vlan_create_destroy6 912 atf_add_test_case vlan_basic6 913 atf_add_test_case vlan_auto_follow_mtu6 914 atf_add_test_case vlan_vlanid6 915 atf_add_test_case vlan_configs6 916 atf_add_test_case vlan_bridge6 917 atf_add_test_case vlan_multicast6 918 } 919
Indexes created Wed Oct 01 13:09:50 GMT 2025