t_ipsec_tunnel.sh revision 1.8
1 # $NetBSD: t_ipsec_tunnel.sh,v 1.8 2017/05/12 02:34:45 ozaki-r Exp $ 2 # 3 # Copyright (c) 2017 Internet Initiative Japan Inc. 4 # All rights reserved. 5 # 6 # Redistribution and use in source and binary forms, with or without 7 # modification, are permitted provided that the following conditions 8 # are met: 9 # 1. Redistributions of source code must retain the above copyright 10 # notice, this list of conditions and the following disclaimer. 11 # 2. Redistributions in binary form must reproduce the above copyright 12 # notice, this list of conditions and the following disclaimer in the 13 # documentation and/or other materials provided with the distribution. 14 # 15 # THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 16 # ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 17 # TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 18 # PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 19 # BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 20 # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 21 # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 22 # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 23 # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 24 # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 25 # POSSIBILITY OF SUCH DAMAGE. 26 # 27 28 SOCK_LOCAL=unix://ipsec_local 29 SOCK_TUNNEL_LOCAL=unix://ipsec_tunel_local 30 SOCK_TUNNEL_REMOTE=unix://ipsec_tunnel_remote 31 SOCK_REMOTE=unix://ipsec_remote 32 BUS_LOCAL=./bus_ipsec_local 33 BUS_TUNNEL=./bus_ipsec_tunnel 34 BUS_REMOTE=./bus_ipsec_remote 35 36 DEBUG=${DEBUG:-false} 37 38 setup_servers() 39 { 40 41 # See https://www.netbsd.org/docs/network/ipsec/#sample_vpn 42 rump_server_crypto_start $SOCK_LOCAL netinet6 43 rump_server_crypto_start $SOCK_TUNNEL_LOCAL netipsec netinet6 44 rump_server_crypto_start $SOCK_TUNNEL_REMOTE netipsec netinet6 45 rump_server_crypto_start $SOCK_REMOTE netinet6 46 rump_server_add_iface $SOCK_LOCAL shmif0 $BUS_LOCAL 47 rump_server_add_iface $SOCK_TUNNEL_LOCAL shmif0 $BUS_LOCAL 48 rump_server_add_iface $SOCK_TUNNEL_LOCAL shmif1 $BUS_TUNNEL 49 rump_server_add_iface $SOCK_TUNNEL_REMOTE shmif0 $BUS_REMOTE 50 rump_server_add_iface $SOCK_TUNNEL_REMOTE shmif1 $BUS_TUNNEL 51 rump_server_add_iface $SOCK_REMOTE shmif0 $BUS_REMOTE 52 } 53 54 check_tunnel_packets() 55 { 56 local outfile=$1 57 local src=$2 58 local dst=$3 59 local proto=$4 60 61 atf_check -s exit:0 -o match:"$src > $dst: $proto" cat $outfile 62 atf_check -s exit:0 -o match:"$dst > $src: $proto" cat $outfile 63 } 64 65 test_ipsec4_tunnel() 66 { 67 local proto=$1 68 local algo=$2 69 local ip_local=10.0.1.2 70 local ip_gw_local=10.0.1.1 71 local ip_gw_local_tunnel=20.0.0.1 72 local ip_gw_remote_tunnel=20.0.0.2 73 local ip_gw_remote=10.0.2.1 74 local ip_remote=10.0.2.2 75 local subnet_local=10.0.1.0 76 local subnet_remote=10.0.2.0 77 local tmpfile=./tmp 78 local outfile=./out 79 local proto_cap=$(echo $proto | tr 'a-z' 'A-Z') 80 local algo_args="$(generate_algo_args $proto $algo)" 81 82 setup_servers 83 84 export RUMP_SERVER=$SOCK_LOCAL 85 atf_check -s exit:0 rump.sysctl -q -w net.inet.ip.dad_count=0 86 atf_check -s exit:0 rump.ifconfig shmif0 $ip_local/24 87 atf_check -s exit:0 -o ignore \ 88 rump.route -n add -net $subnet_remote $ip_gw_local 89 90 export RUMP_SERVER=$SOCK_TUNNEL_LOCAL 91 atf_check -s exit:0 rump.sysctl -q -w net.inet.ip.dad_count=0 92 atf_check -s exit:0 rump.ifconfig shmif0 $ip_gw_local/24 93 atf_check -s exit:0 rump.ifconfig shmif1 $ip_gw_local_tunnel/24 94 atf_check -s exit:0 rump.sysctl -q -w net.inet.ip.forwarding=1 95 atf_check -s exit:0 -o ignore \ 96 rump.route -n add -net $subnet_remote $ip_gw_remote_tunnel 97 98 export RUMP_SERVER=$SOCK_TUNNEL_REMOTE 99 atf_check -s exit:0 rump.sysctl -q -w net.inet.ip.dad_count=0 100 atf_check -s exit:0 rump.ifconfig shmif0 $ip_gw_remote/24 101 atf_check -s exit:0 rump.ifconfig shmif1 $ip_gw_remote_tunnel/24 102 atf_check -s exit:0 rump.sysctl -q -w net.inet.ip.forwarding=1 103 atf_check -s exit:0 -o ignore \ 104 rump.route -n add -net $subnet_local $ip_gw_local_tunnel 105 106 export RUMP_SERVER=$SOCK_REMOTE 107 atf_check -s exit:0 rump.sysctl -q -w net.inet.ip.dad_count=0 108 atf_check -s exit:0 rump.ifconfig shmif0 $ip_remote/24 109 atf_check -s exit:0 -o ignore \ 110 rump.route -n add -net $subnet_local $ip_gw_remote 111 112 extract_new_packets $BUS_TUNNEL > $outfile 113 114 export RUMP_SERVER=$SOCK_LOCAL 115 atf_check -s exit:0 -o ignore rump.ping -c 1 -n -w 3 $ip_remote 116 117 extract_new_packets $BUS_TUNNEL > $outfile 118 atf_check -s exit:0 \ 119 -o match:"$ip_local > $ip_remote: ICMP echo request" \ 120 cat $outfile 121 atf_check -s exit:0 \ 122 -o match:"$ip_remote > $ip_local: ICMP echo reply" \ 123 cat $outfile 124 125 export RUMP_SERVER=$SOCK_TUNNEL_LOCAL 126 # from https://www.netbsd.org/docs/network/ipsec/ 127 cat > $tmpfile <<-EOF 128 add $ip_gw_local_tunnel $ip_gw_remote_tunnel $proto 10000 $algo_args; 129 add $ip_gw_remote_tunnel $ip_gw_local_tunnel $proto 10001 $algo_args; 130 spdadd $subnet_local/24 $subnet_remote/24 any -P out ipsec 131 $proto/tunnel/$ip_gw_local_tunnel-$ip_gw_remote_tunnel/require; 132 spdadd $subnet_remote/24 $subnet_local/24 any -P in ipsec 133 $proto/tunnel/$ip_gw_remote_tunnel-$ip_gw_local_tunnel/require; 134 EOF 135 $DEBUG && cat $tmpfile 136 atf_check -s exit:0 -o empty $HIJACKING setkey -c < $tmpfile 137 check_sa_entries $SOCK_TUNNEL_LOCAL $ip_gw_local_tunnel \ 138 $ip_gw_remote_tunnel 139 140 export RUMP_SERVER=$SOCK_TUNNEL_REMOTE 141 cat > $tmpfile <<-EOF 142 add $ip_gw_local_tunnel $ip_gw_remote_tunnel $proto 10000 $algo_args; 143 add $ip_gw_remote_tunnel $ip_gw_local_tunnel $proto 10001 $algo_args; 144 spdadd $subnet_remote/24 $subnet_local/24 any -P out ipsec 145 $proto/tunnel/$ip_gw_remote_tunnel-$ip_gw_local_tunnel/require; 146 spdadd $subnet_local/24 $subnet_remote/24 any -P in ipsec 147 $proto/tunnel/$ip_gw_local_tunnel-$ip_gw_remote_tunnel/require; 148 EOF 149 $DEBUG && cat $tmpfile 150 atf_check -s exit:0 -o empty $HIJACKING setkey -c < $tmpfile 151 check_sa_entries $SOCK_TUNNEL_REMOTE $ip_gw_local_tunnel \ 152 $ip_gw_remote_tunnel 153 154 export RUMP_SERVER=$SOCK_LOCAL 155 atf_check -s exit:0 -o ignore rump.ping -c 1 -n -w 3 $ip_remote 156 157 extract_new_packets $BUS_TUNNEL > $outfile 158 check_tunnel_packets $outfile $ip_gw_local_tunnel $ip_gw_remote_tunnel \ 159 $proto_cap 160 161 test_flush_entries $SOCK_TUNNEL_LOCAL 162 test_flush_entries $SOCK_TUNNEL_REMOTE 163 } 164 165 test_ipsec6_tunnel() 166 { 167 local proto=$1 168 local algo=$2 169 local ip_local=fd00:1::2 170 local ip_gw_local=fd00:1::1 171 local ip_gw_local_tunnel=fc00::1 172 local ip_gw_remote_tunnel=fc00::2 173 local ip_gw_remote=fd00:2::1 174 local ip_remote=fd00:2::2 175 local subnet_local=fd00:1:: 176 local subnet_remote=fd00:2:: 177 local tmpfile=./tmp 178 local outfile=./out 179 local proto_cap=$(echo $proto | tr 'a-z' 'A-Z') 180 local algo_args="$(generate_algo_args $proto $algo)" 181 182 setup_servers 183 184 export RUMP_SERVER=$SOCK_LOCAL 185 atf_check -s exit:0 rump.sysctl -q -w net.inet6.ip6.dad_count=0 186 atf_check -s exit:0 rump.ifconfig shmif0 inet6 $ip_local/64 187 atf_check -s exit:0 -o ignore \ 188 rump.route -n add -inet6 -net $subnet_remote/64 $ip_gw_local 189 190 export RUMP_SERVER=$SOCK_TUNNEL_LOCAL 191 atf_check -s exit:0 rump.sysctl -q -w net.inet6.ip6.dad_count=0 192 atf_check -s exit:0 rump.ifconfig shmif0 inet6 $ip_gw_local/64 193 atf_check -s exit:0 rump.ifconfig shmif1 inet6 $ip_gw_local_tunnel/64 194 atf_check -s exit:0 rump.sysctl -q -w net.inet6.ip6.forwarding=1 195 atf_check -s exit:0 -o ignore \ 196 rump.route -n add -inet6 -net $subnet_remote/64 $ip_gw_remote_tunnel 197 198 export RUMP_SERVER=$SOCK_TUNNEL_REMOTE 199 atf_check -s exit:0 rump.sysctl -q -w net.inet6.ip6.dad_count=0 200 atf_check -s exit:0 rump.ifconfig shmif0 inet6 $ip_gw_remote/64 201 atf_check -s exit:0 rump.ifconfig shmif1 inet6 $ip_gw_remote_tunnel/64 202 atf_check -s exit:0 rump.sysctl -q -w net.inet6.ip6.forwarding=1 203 atf_check -s exit:0 -o ignore \ 204 rump.route -n add -inet6 -net $subnet_local/64 $ip_gw_local_tunnel 205 206 export RUMP_SERVER=$SOCK_REMOTE 207 atf_check -s exit:0 rump.sysctl -q -w net.inet6.ip6.dad_count=0 208 atf_check -s exit:0 rump.ifconfig shmif0 inet6 $ip_remote 209 atf_check -s exit:0 -o ignore \ 210 rump.route -n add -inet6 -net $subnet_local/64 $ip_gw_remote 211 212 extract_new_packets $BUS_TUNNEL > $outfile 213 214 export RUMP_SERVER=$SOCK_LOCAL 215 atf_check -s exit:0 -o ignore rump.ping6 -c 1 -n -X 3 $ip_remote 216 217 extract_new_packets $BUS_TUNNEL > $outfile 218 atf_check -s exit:0 \ 219 -o match:"$ip_local > $ip_remote: ICMP6, echo request" \ 220 cat $outfile 221 atf_check -s exit:0 \ 222 -o match:"$ip_remote > $ip_local: ICMP6, echo reply" \ 223 cat $outfile 224 225 export RUMP_SERVER=$SOCK_TUNNEL_LOCAL 226 # from https://www.netbsd.org/docs/network/ipsec/ 227 cat > $tmpfile <<-EOF 228 add $ip_gw_local_tunnel $ip_gw_remote_tunnel $proto 10000 $algo_args; 229 add $ip_gw_remote_tunnel $ip_gw_local_tunnel $proto 10001 $algo_args; 230 spdadd $subnet_local/64 $subnet_remote/64 any -P out ipsec 231 $proto/tunnel/$ip_gw_local_tunnel-$ip_gw_remote_tunnel/require; 232 spdadd $subnet_remote/64 $subnet_local/64 any -P in ipsec 233 $proto/tunnel/$ip_gw_remote_tunnel-$ip_gw_local_tunnel/require; 234 EOF 235 $DEBUG && cat $tmpfile 236 atf_check -s exit:0 -o empty $HIJACKING setkey -c < $tmpfile 237 check_sa_entries $SOCK_TUNNEL_LOCAL $ip_gw_local_tunnel \ 238 $ip_gw_remote_tunnel 239 240 export RUMP_SERVER=$SOCK_TUNNEL_REMOTE 241 cat > $tmpfile <<-EOF 242 add $ip_gw_local_tunnel $ip_gw_remote_tunnel $proto 10000 $algo_args; 243 add $ip_gw_remote_tunnel $ip_gw_local_tunnel $proto 10001 $algo_args; 244 spdadd $subnet_remote/64 $subnet_local/64 any -P out ipsec 245 $proto/tunnel/$ip_gw_remote_tunnel-$ip_gw_local_tunnel/require; 246 spdadd $subnet_local/64 $subnet_remote/64 any -P in ipsec 247 $proto/tunnel/$ip_gw_local_tunnel-$ip_gw_remote_tunnel/require; 248 EOF 249 $DEBUG && cat $tmpfile 250 atf_check -s exit:0 -o empty $HIJACKING setkey -c < $tmpfile 251 check_sa_entries $SOCK_TUNNEL_REMOTE $ip_gw_local_tunnel \ 252 $ip_gw_remote_tunnel 253 254 export RUMP_SERVER=$SOCK_LOCAL 255 atf_check -s exit:0 -o ignore rump.ping6 -c 1 -n -X 3 $ip_remote 256 257 extract_new_packets $BUS_TUNNEL > $outfile 258 check_tunnel_packets $outfile $ip_gw_local_tunnel $ip_gw_remote_tunnel \ 259 $proto_cap 260 261 test_flush_entries $SOCK_TUNNEL_LOCAL 262 test_flush_entries $SOCK_TUNNEL_REMOTE 263 } 264 265 test_tunnel_common() 266 { 267 local ipproto=$1 268 local proto=$2 269 local algo=$3 270 271 if [ $ipproto = ipv4 ]; then 272 test_ipsec4_tunnel $proto $algo 273 else 274 test_ipsec6_tunnel $proto $algo 275 fi 276 } 277 278 add_test_tunnel_mode() 279 { 280 local ipproto=$1 281 local proto=$2 282 local algo=$3 283 local _algo=$(echo $algo | sed 's/-//g') 284 local name= desc= 285 286 name="ipsec_tunnel_${ipproto}_${proto}_${_algo}" 287 desc="Tests of IPsec ($ipproto) tunnel mode with $proto ($algo)" 288 289 atf_test_case ${name} cleanup 290 eval " \ 291 ${name}_head() { \ 292 atf_set \"descr\" \"$desc\"; \ 293 atf_set \"require.progs\" \"rump_server\" \"setkey\"; \ 294 }; \ 295 ${name}_body() { \ 296 test_tunnel_common $ipproto $proto $algo; \ 297 rump_server_destroy_ifaces; \ 298 }; \ 299 ${name}_cleanup() { \ 300 $DEBUG && dump; \ 301 cleanup; \ 302 } \ 303 " 304 atf_add_test_case ${name} 305 } 306 307 atf_init_test_cases() 308 { 309 local algo= 310 311 for algo in $ESP_ENCRYPTION_ALGORITHMS; do 312 add_test_tunnel_mode ipv4 esp $algo 313 add_test_tunnel_mode ipv6 esp $algo 314 done 315 316 for algo in $AH_AUTHENTICATION_ALGORITHMS; do 317 add_test_tunnel_mode ipv4 ah $algo 318 add_test_tunnel_mode ipv6 ah $algo 319 done 320 } 321
Indexes created Thu Sep 25 16:09:42 GMT 2025