Home | History | Annotate | Line # | Download | only in mpls
t_mpls_fw64.sh revision 1.3
      1 # $NetBSD: t_mpls_fw64.sh,v 1.3 2016/08/10 07:50:37 ozaki-r Exp $
      2 #
      3 # Copyright (c) 2015 The NetBSD Foundation, Inc.
      4 # All rights reserved.
      5 #
      6 # Redistribution and use in source and binary forms, with or without
      7 # modification, are permitted provided that the following conditions
      8 # are met:
      9 # 1. Redistributions of source code must retain the above copyright
     10 #    notice, this list of conditions and the following disclaimer.
     11 # 2. Redistributions in binary form must reproduce the above copyright
     12 #    notice, this list of conditions and the following disclaimer in the
     13 #    documentation and/or other materials provided with the distribution.
     14 #
     15 # THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
     16 # ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     17 # TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     18 # PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
     19 # BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     20 # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     21 # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     22 # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     23 # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     24 # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     25 # POSSIBILITY OF SUCH DAMAGE.
     26 #
     27 
     28 # Test MPLS encap/decap and forwarding using INET6 as encapsulated protocol
     29 # Setup four routers connected like this: R1---R2---R3---R4--
     30 # Goal is to be able to ping from R1 the outermost interface of R4
     31 # Disable net.inet[6].ip[6].forwarding, enable net.mpls.forwarding
     32 # Use IPv6 between R1-R2-R3 and IPv4 between R3-R4
     33 # As we use IPv4 on last link we should use only expl.null there
     34 # because implicit null will assume IPv4 (as the next-hop)
     35 # But we can use impl null on R2-R1 link because stack will correctly
     36 # guess IPv6 (from next-hop)
     37 # Add route on R1 in order to encapsulate into MPLS the IP6 packets with
     38 #     destination equal to R4 right hand side interface
     39 # Add MPLS routes on R2 in order to forward frames belonging to that FEC to R3
     40 # Add MPLS expl.null route on R3 for that FEC, pointing to R4
     41 # Do the same for the reverse direction (R4 to R1)
     42 # ping6 from R1 to R4 right hand side interface
     43 
     44 
     45 RUMP_SERVER1=unix://./r1
     46 RUMP_SERVER2=unix://./r2
     47 RUMP_SERVER3=unix://./r3
     48 RUMP_SERVER4=unix://./r4
     49 
     50 RUMP_FLAGS6="-lrumpnet -lrumpnet_net -lrumpnet_netinet -lrumpnet_netinet6 \
     51              -lrumpdev -lrumpnet_shmif -lrumpnet_netmpls"
     52 
     53 startservers()
     54 {
     55 
     56 	ulimit -r 300
     57 	atf_check -s exit:0 rump_server ${RUMP_FLAGS6} ${RUMP_SERVER1}
     58 	atf_check -s exit:0 rump_server ${RUMP_FLAGS6} ${RUMP_SERVER2}
     59 	atf_check -s exit:0 rump_server ${RUMP_FLAGS6} ${RUMP_SERVER3}
     60 	atf_check -s exit:0 rump_server ${RUMP_FLAGS6} ${RUMP_SERVER4}
     61 }
     62 
     63 configservers()
     64 {
     65 
     66 	# Setup the first server
     67 	export RUMP_SERVER=${RUMP_SERVER1}
     68 	atf_check -s exit:0 rump.ifconfig shmif0 create
     69 	atf_check -s exit:0 rump.ifconfig shmif0 linkstr ./shdom1
     70 	atf_check -s exit:0 rump.ifconfig shmif0 inet6 fd00:1234::1/64 alias
     71 	atf_check -s exit:0 rump.ifconfig mpls0 create up
     72 	atf_check -s exit:0 rump.sysctl -q -w net.mpls.accept=1
     73 	atf_check -s exit:0 rump.sysctl -q -w net.inet6.ip6.forwarding=0
     74 	atf_check -s exit:0 rump.route -q add -inet6 fd00:1234:0:3::/64 \
     75 	    -ifa fd00:1234::1 \
     76 	    -ifp mpls0 -tag 25 -inet6 fd00:1234::2
     77 
     78 	# Setup the second server
     79 	export RUMP_SERVER=${RUMP_SERVER2}
     80 	atf_check -s exit:0 rump.ifconfig shmif0 create
     81 	atf_check -s exit:0 rump.ifconfig shmif0 linkstr ./shdom1
     82 	atf_check -s exit:0 rump.ifconfig shmif0 inet6 fd00:1234::2/64 alias
     83 	atf_check -s exit:0 rump.ifconfig shmif1 create
     84 	atf_check -s exit:0 rump.ifconfig shmif1 linkstr ./shdom2
     85 	atf_check -s exit:0 rump.ifconfig shmif1 inet6 fd00:1234:0:1::1/64 alias
     86 	atf_check -s exit:0 rump.ifconfig mpls0 create up
     87 	atf_check -s exit:0 rump.sysctl -q -w net.mpls.accept=1
     88 	atf_check -s exit:0 rump.sysctl -q -w net.mpls.forwarding=1
     89 	atf_check -s exit:0 rump.sysctl -q -w net.inet6.ip6.forwarding=0
     90 	atf_check -s exit:0 rump.route -q add -mpls 25 -tag 30 \
     91 	    -inet6 fd00:1234:0:1::2
     92 	atf_check -s exit:0 rump.route -q add -mpls 27 -tag ${1} -inet6 \
     93 	    fd00:1234::1
     94 
     95 	# Setup the third server
     96 	export RUMP_SERVER=${RUMP_SERVER3}
     97 	atf_check -s exit:0 rump.ifconfig shmif0 create
     98 	atf_check -s exit:0 rump.ifconfig shmif0 linkstr ./shdom2
     99 	atf_check -s exit:0 rump.ifconfig shmif0 inet6 fd00:1234:0:1::2/64 alias
    100 	atf_check -s exit:0 rump.ifconfig shmif1 create
    101 	atf_check -s exit:0 rump.ifconfig shmif1 linkstr ./shdom3
    102 	atf_check -s exit:0 rump.ifconfig shmif1 inet 10.0.3.1/24
    103 	atf_check -s exit:0 rump.ifconfig mpls0 create up
    104 	atf_check -s exit:0 rump.sysctl -q -w net.mpls.accept=1
    105 	atf_check -s exit:0 rump.sysctl -q -w net.mpls.forwarding=1
    106 	atf_check -s exit:0 rump.sysctl -q -w net.inet6.ip6.forwarding=0
    107 	atf_check -s exit:0 rump.sysctl -q -w net.inet.ip.forwarding=0
    108 	atf_check -s exit:0 rump.route -q add -mpls 30 -tag 2 \
    109 	    -inet 10.0.3.2
    110 	atf_check -s exit:0 rump.route -q add -mpls 26 -tag 27 \
    111 	    -inet6 fd00:1234:0:1::1
    112 
    113 	# Setup the fourth server
    114 	export RUMP_SERVER=${RUMP_SERVER4}
    115 	atf_check -s exit:0 rump.ifconfig shmif0 create
    116 	atf_check -s exit:0 rump.ifconfig shmif0 linkstr ./shdom3
    117 	atf_check -s exit:0 rump.ifconfig shmif0 inet 10.0.3.2
    118 	atf_check -s exit:0 rump.ifconfig shmif1 create
    119 	atf_check -s exit:0 rump.ifconfig shmif1 linkstr ./shdom4
    120 	atf_check -s exit:0 rump.ifconfig shmif1 inet6 fd00:1234:0:3::1/64 alias
    121 	atf_check -s exit:0 rump.ifconfig mpls0 create up
    122 	atf_check -s exit:0 rump.sysctl -q -w net.mpls.accept=1
    123 	atf_check -s exit:0 rump.sysctl -q -w net.inet6.ip6.forwarding=0
    124 	atf_check -s exit:0 rump.sysctl -q -w net.inet.ip.forwarding=0
    125 	atf_check -s exit:0 rump.route -q add -inet6 fd00:1234::/64 \
    126 	    -ifa fd00:1234:0:3::1 \
    127 	    -ifp mpls0 -tag 26 -inet 10.0.3.1
    128 
    129 	unset RUMP_SERVER
    130 }
    131 
    132 doping()
    133 {
    134 
    135 	export RUMP_SERVER=${RUMP_SERVER1}
    136 	atf_check -s exit:0 \
    137 	    -o match:" bytes from fd00:1234::2, icmp_seq=" \
    138 	    rump.ping6 -n -o -X 2 fd00:1234::2
    139 	export RUMP_SERVER=${RUMP_SERVER2}
    140 	atf_check -s exit:0 \
    141 	    -o match:" bytes from fd00:1234:0:1::2, icmp_seq=" \
    142 	    rump.ping6 -n -o -X 2 fd00:1234:0:1::2
    143 	export RUMP_SERVER=${RUMP_SERVER3}
    144 	atf_check -s exit:0 \
    145 	    -o match:" bytes from 10.0.3.2: icmp_seq" \
    146 	    rump.ping -n -o -w 2 10.0.3.2
    147 	export RUMP_SERVER=${RUMP_SERVER1}
    148 	atf_check -s exit:0 \
    149 	    -o match:" bytes from fd00:1234:0:3::1, icmp_seq=" \
    150 	    rump.ping6 -n -o -X 2 fd00:1234:0:3::1
    151 	unset RUMP_SERVER
    152 }
    153 
    154 do_check_route()
    155 {
    156 
    157 	export RUMP_SERVER=${RUMP_SERVER1}
    158 	atf_check -s exit:0 \
    159 	    -o match:"^fd00:1234:0:3::/64.+fd00:1234::2.+25.+mpls0" \
    160 	    rump.netstat -nrT
    161 	unset RUMP_SERVER
    162 }
    163 
    164 docleanup()
    165 {
    166 
    167 	RUMP_SERVER=${RUMP_SERVER1} rump.halt
    168 	RUMP_SERVER=${RUMP_SERVER2} rump.halt
    169 	RUMP_SERVER=${RUMP_SERVER3} rump.halt
    170 	RUMP_SERVER=${RUMP_SERVER4} rump.halt
    171 }
    172 
    173 atf_test_case mplsfw64_impl cleanup
    174 mplsfw64_impl_head()
    175 {
    176 
    177 	atf_set "descr" "IP6/MPLS test using impl. NULL labels in mixed env."
    178 	atf_set "require.progs" "rump_server"
    179 }
    180 
    181 mplsfw64_impl_body()
    182 {
    183 
    184 	startservers
    185 	configservers 3
    186 	do_check_route
    187 	doping
    188 }
    189 
    190 mplsfw64_impl_cleanup()
    191 {
    192 
    193 	docleanup
    194 }
    195 
    196 
    197 atf_test_case mplsfw64_expl cleanup
    198 mplsfw64_expl_head()
    199 {
    200 
    201 	atf_set "descr" "IP6/MPLS test using explicit NULL labels in mixed env."
    202 	atf_set "require.progs" "rump_server"
    203 }
    204 
    205 mplsfw64_expl_body()
    206 {
    207 
    208 	startservers
    209 	configservers 2
    210 	do_check_route
    211 	doping
    212 }
    213 
    214 mplsfw64_expl_cleanup()
    215 {
    216 
    217 	docleanup
    218 }
    219 
    220 
    221 atf_init_test_cases()
    222 { 
    223 
    224 	atf_add_test_case mplsfw64_impl
    225 	atf_add_test_case mplsfw64_expl
    226 }
    227