Makefile revision 1.151
1 # $NetBSD: Makefile,v 1.151 2011/11/01 23:11:55 joerg Exp $ 2 3 .include <bsd.own.mk> 4 5 .if defined(HAVE_GCC) 6 TOOLCHAIN_BITS= gmake .WAIT 7 .if ${TOOLCHAIN_MISSING} == "no" 8 .if ${HAVE_GCC} >= 45 9 TOOLCHAIN_BITS+= gmp .WAIT 10 TOOLCHAIN_BITS+= mpfr .WAIT 11 TOOLCHAIN_BITS+= mpc .WAIT 12 .endif 13 TOOLCHAIN_BITS+= binutils .WAIT 14 TOOLCHAIN_BITS+= gcc 15 . if ${MKCROSSGDB:Uno} != "no" 16 TOOLCHAIN_BITS+= gdb 17 . endif 18 TOOLCHAIN_BITS+= .WAIT dbsym mdsetimage 19 # XXX Eventually, we want to be able to build dbsym and mdsetimage 20 # XXX if EXTERNAL_TOOLCHAIN is set. 21 .endif 22 .endif 23 24 .if defined(HAVE_PCC) 25 TOOLCHAIN_BITS= gmake .WAIT 26 .if ${TOOLCHAIN_MISSING} == "no" 27 TOOLCHAIN_BITS+= binutils .WAIT 28 TOOLCHAIN_BITS+= pcc 29 .endif 30 TOOLCHAIN_BITS+= .WAIT dbsym mdsetimage 31 .endif 32 33 DTRACE_BITS= 34 .if ${MKDTRACE} != "no" 35 DTRACE_BITS+= .WAIT libelf 36 DTRACE_BITS+= .WAIT libdwarf 37 DTRACE_BITS+= .WAIT libctf 38 DTRACE_BITS+= .WAIT ctfconvert ctfmerge 39 .endif 40 41 LINT_BITS= 42 .if ${MKLINT} != "no" 43 LINT_BITS= lint lint2 44 .endif 45 46 # Dependencies in SUBDIR below ordered to maximize parallel ability. 47 SUBDIR= host-mkdep .WAIT compat .WAIT \ 48 binstall .WAIT mktemp .WAIT sed .WAIT \ 49 cap_mkdb crunchgen ctags genassym gencat hexdump join \ 50 ${LINT_BITS} \ 51 lorder makewhatis mkdep mtree nbperf rpcgen tic tsort \ 52 uudecode m4 \ 53 .WAIT texinfo \ 54 .WAIT yacc \ 55 .WAIT awk \ 56 .WAIT lex \ 57 .WAIT pax \ 58 .WAIT ${TOOLCHAIN_BITS} \ 59 ${DTRACE_BITS} \ 60 asn1_compile cat cksum compile_et config db \ 61 file lint1 slc \ 62 makefs .WAIT menuc mkcsmapper mkesdb mklocale mknod msgc \ 63 .WAIT disklabel \ 64 .WAIT paxctl \ 65 .WAIT fdisk \ 66 .WAIT installboot \ 67 pwd_mkdb stat strfile sunlabel zic 68 69 .if ${MKLLVM} != "no" 70 SUBDIR+= \ 71 llvm .WAIT \ 72 llvm-lib/libLLVMSupport llvm-lib/libLLVMTableGen .WAIT \ 73 llvm-tblgen llvm-clang-tblgen .WAIT \ 74 llvm-include .WAIT \ 75 llvm-lib .WAIT \ 76 llvm-clang 77 .endif 78 79 .if ${MKMAN} != "no" || ${MKDOC} != "no" || ${MKHTML} != "no" 80 . if ${MKGROFF} != "no" 81 SUBDIR+= groff 82 . endif 83 SUBDIR+= mandoc 84 .endif 85 86 .if ${MKMAINTAINERTOOLS:Uno} != "no" 87 SUBDIR+= autoconf .WAIT gettext 88 .endif 89 90 .if ${USE_PIGZGZIP} != "no" 91 SUBDIR+= pigz 92 .endif 93 94 .if ${MACHINE} == "hp700" 95 SUBDIR+= hp700-mkboot 96 .endif 97 98 .if ${MACHINE} == "ibmnws" 99 SUBDIR+= ibmnws-ncdcs 100 .endif 101 102 .if ${MACHINE} == "macppc" 103 SUBDIR+= macppc-fixcoff 104 .endif 105 106 .if (${MACHINE} == "prep" || ${MACHINE} == "rs6000" || ${MACHINE} == "bebox") 107 SUBDIR+= powerpc-mkbootimage 108 .endif 109 110 .if ${MACHINE_ARCH} == "m68k" 111 SUBDIR+= m68k-elf2aout 112 .endif 113 114 .if (${MACHINE_ARCH} == "mipsel" || ${MACHINE_ARCH} == "mipseb" || \ 115 ${MACHINE_ARCH} == "mips64el" || ${MACHINE_ARCH} == "mips64eb") 116 SUBDIR+= mips-elf2ecoff 117 .endif 118 119 .if (${MACHINE} == "sgimips") 120 SUBDIR+= sgivol 121 .endif 122 123 .if ${MACHINE} == "acorn32" 124 SUBDIR+= sparkcrc 125 .endif 126 127 .if (${MACHINE_ARCH} == "sparc" || ${MACHINE_ARCH} == "sparc64") 128 SUBDIR+= fgen 129 .endif 130 131 .if ${MACHINE} == "amiga" 132 SUBDIR+= amiga-elf2bb 133 SUBDIR+= amiga-txlt 134 .endif 135 136 .if ${MACHINE} == "hp300" 137 SUBDIR+= hp300-mkboot 138 .endif 139 140 .if ${MACHINE} == "evbarm" || ${MACHINE} == "evbmips" || \ 141 ${MACHINE} == "evbppc" || ${MACHINE} == "sandpoint" 142 SUBDIR+= mkubootimage 143 .endif 144 145 check_MKTOOLS: .PHONY .NOTMAIN 146 .if ${MKTOOLS:Uyes} == "no" 147 @echo '*** WARNING: "MKTOOLS" is set to "no"; this will prevent building and' 148 @echo '*** updating your host toolchain. This should be used only as a' 149 @echo '*** temporary workaround for toolchain problems, as it will result' 150 @echo '*** in version skew and build errors over time!' 151 .endif 152 153 .if ${MKTOOLS:Uyes} == "no" || ${USETOOLS} != "yes" # { 154 realall realdepend install: check_MKTOOLS 155 156 .for dir in ${SUBDIR:N.WAIT} 157 all-${dir} depend-${dir} dependall-${dir} install-${dir}: 158 @true 159 .endfor 160 .endif # } 161 162 .include <bsd.subdir.mk> 163 .include <bsd.obj.mk> 164 165 .if !defined(PREVIOUSTOOLDIR) 166 . if exists(PREVIOUSTOOLDIR) 167 PREVIOUSTOOLDIR!= cat PREVIOUSTOOLDIR 168 . else 169 PREVIOUSTOOLDIR= 170 . endif 171 .endif 172 173 CLEANFILES+= PREVIOUSTOOLDIR 174 175 realall realdepend: .MAKE 176 .if !empty(PREVIOUSTOOLDIR) && "${PREVIOUSTOOLDIR}" != "${TOOLDIR}" 177 @echo "*** WARNING: TOOLDIR has moved?" 178 @echo "*** PREVIOUSTOOLDIR '${PREVIOUSTOOLDIR}'" 179 @echo "*** != TOOLDIR '${TOOLDIR}'" 180 @echo "*** Cleaning mis-matched tools" 181 rm -f PREVIOUSTOOLDIR 182 (cd ${.CURDIR} && ${MAKE} PREVIOUSTOOLDIR=${TOOLDIR} cleandir) 183 .endif 184 echo ${TOOLDIR} >PREVIOUSTOOLDIR 185 186 # For each .WAIT point, make sure the immediately preceding target is 187 # installed before building anything after that point. 188 # (dsl: which means that with: 'a b .WAIT c' the build of 'c' waits for the 189 # install of 'b', but not the install of 'a'.) 190 # 191 # We use the "internal" targets and dependencies generated by <bsd.subdir.mk> 192 # to achieve this. These targets look like: 193 # subdir-all: all-dir1 [.WAIT] all-dir2 etc.. 194 # subdir-install: install-dir1 [.WAIT] install-dir2 etc.. 195 # and so on for each element in ${TARGETS}, with .WAIT sources inserted at 196 # places corresponding to the .WAITs in our $SUBDIR variable. 197 # 198 # Also, since we're now mixing `install' with `all' and `depend' targets 199 # an order relationship between those in each individual subdirectory 200 # must be established. 201 # 202 _deps:= 203 _prev:= 204 205 .for d in ${SUBDIR} # { 206 _this:= ${d} 207 208 .if ${_this} == ".WAIT" # { 209 210 # setup dependency to apply to all/depend targets in the next group 211 _deps:= ${_deps} ${_prev:S/^/install-/} 212 213 # if we're building *only* individual targets (i.e. "dependall-yacc"), 214 # make sure prerequisite tools build before installing 215 # XXX: dsl: this is likely to generate a dependency loop since there is 216 # a .ORDER releation between the nodes as well. 217 .if !make(all) && !make(dependall) && !make(install) 218 install-${_prev}: dependall-${_prev} 219 .endif 220 221 .else # ${_this} != ".WAIT" # } { 222 223 # order depend/all/install targets for ${d} subdir. 224 .ORDER: depend-${d} all-${d} dependall-${d} install-${d} 225 226 # prevent cleandir in real{all,depend} from interfering with subdir makes 227 .ORDER: realdepend dependall-${d} 228 .ORDER: realdepend depend-${d} 229 .ORDER: realall all-${d} 230 231 # make all/depend-${d} dependent on list of install targets 232 depend-${d} all-${d} dependall-${d}: ${_deps} 233 234 .endif # ${_this} != ".WAIT" # } 235 236 # stash current name in case the next entry is .WAIT 237 _prev:= ${d} 238 .endfor # } 239 240 cleandir: 241 rm -f ${CLEANFILES} 242
Indexes created Sun Oct 12 22:09:51 GMT 2025