Makefile revision 1.212 
1#	$NetBSD: Makefile,v 1.212 2021/11/14 15:48:02 skrll Exp $
2
3.include <bsd.own.mk>
4.include <bsd.endian.mk>
5
6# Make sure that the ordered build/install processing applies when using
7# plain make.
8.MAIN: build_install
9
10# TOOLDIR must be valid, unless MKTOOLS=no
11.if ${MKTOOLS:Uyes} != "no"
12.if "${TOOLDIR}" == ""
13.error "TOOLDIR is undefined or empty"
14.elif "${TOOLDIR:tW:M/*}" == ""
15.error "TOOLDIR is not an absolute path: ${TOOLDIR}"
16#.elif !exists(TOOLDIR) # XXX .exists fails for directories
17#.error "TOOLDIR does not exist: ${TOOLDIR}"
18.endif
19.endif # MKTOOLS != no
20
21# TOOLS_BUILDRUMP == yes builds only the subset of the tools required
22# for building rump kernels and the hypervisor.  It is typically used
23# when building rump kernels targeted for non-NetBSD systems (via
24# buildrump.sh), and should not be set for a regular "make build".
25TOOLS_BUILDRUMP?=no
26
27.if ${TOOLCHAIN_MISSING} == "no"
28. if (defined(HAVE_GCC) && ${HAVE_GCC} > 0) || \
29     (defined(HAVE_GDB) && ${HAVE_GDB} > 0 && ${MKCROSSGDB:Uno} != "no")
30TOOLCHAIN_BITS+= gmake .WAIT
31TOOLCHAIN_BITS+= gmp .WAIT
32TOOLCHAIN_BITS+= mpfr .WAIT
33TOOLCHAIN_BITS+= mpc .WAIT
34. endif
35
36TOOLCHAIN_BITS+= binutils .WAIT
37
38. if defined(HAVE_GCC) && ${HAVE_GCC} > 0
39TOOLCHAIN_BITS+= gcc
40. endif
41
42. if defined(HAVE_GDB) && ${HAVE_GDB} > 0 && ${MKCROSSGDB:Uno} != "no"
43TOOLCHAIN_BITS+= gdb
44. endif
45
46TOOLCHAIN_BITS+= .WAIT
47.endif
48
49.if defined(HAVE_PCC)
50. if ${TOOLCHAIN_MISSING} == "no"
51TOOLCHAIN_BITS+= pcc
52. endif
53.endif
54
55.if ${TOOLCHAIN_MISSING} == "no" || defined(EXTERNAL_TOOLCHAIN)
56TOOLCHAIN_BITS+= dbsym mdsetimage
57.endif
58
59DTRACE_BITS=
60.if ${MKDTRACE} != "no" || ${MKCTF} != "no"
61DTRACE_BITS+= .WAIT libelf
62DTRACE_BITS+= .WAIT libdwarf
63DTRACE_BITS+= .WAIT libctf
64.endif
65.if ${MKCTF} != "no"
66DTRACE_BITS+= .WAIT ctfconvert ctfmerge
67.endif
68
69LINT_BITS=
70.if ${MKLINT} != "no"
71LINT_BITS= lint lint2
72.endif
73
74# All of host-mkdep, compat, and binstall are needed before anything
75# else.  Within this group, they must be built in a specific order, and
76# all of them must be built before any of them is installed.  They may
77# be installed in any order.  This can't be expressed using the .WAIT
78# notation inside the SUBDIR list.
79#
80# XXX .ORDER does not work when multiple targets are passed on the
81# make command line without "-j", so use dependencies in addition to .ORDER.
82#
83.ORDER: dependall-host-mkdep dependall-compat dependall-binstall \
84	dependall-date
85.if make(dependall-host-mkdep) && make(dependall-compat)
86dependall-compat: dependall-host-mkdep
87.endif
88.if make(dependall-compat) && make(dependall-binstall)
89dependall-binstall: dependall-compat
90.endif
91.if make(dependall-date)
92dependall-date: dependall-host-mkdep dependall-compat
93.endif
94
95# Dependencies in SUBDIR below ordered to maximize parallel ability.
96# See above for special treatment for host-mkdep, compat, and binstall.
97#
98SUBDIR=	host-mkdep compat binstall date \
99	.WAIT mktemp .WAIT sed .WAIT genassym
100.if ${TOOLS_BUILDRUMP} == "no"
101SUBDIR+= cap_mkdb crunchgen ctags gencat hexdump \
102		${LINT_BITS} \
103		makewhatis mtree nbperf .WAIT uudecode
104.endif
105
106SUBDIR+= cat rpcgen join lorder m4 mkdep tsort .WAIT yacc .WAIT awk .WAIT lex
107.if ${TOOLS_BUILDRUMP} == "no"
108SUBDIR+= xz-include .WAIT grep xz-lib pax .WAIT libprop
109
110SUBDIR += .WAIT texinfo \
111	.WAIT tic \
112	.WAIT ${TOOLCHAIN_BITS} \
113	${DTRACE_BITS} \
114		asn1_compile cksum compile_et db \
115		file lint1 slc \
116		makefs sortinfo \
117		.WAIT menuc mkcsmapper mkesdb mklocale mknod msgc \
118		.WAIT disklabel gpt \
119		.WAIT paxctl \
120		.WAIT fdisk \
121		.WAIT installboot \
122		pwd_mkdb strfile sunlabel vgrind zic
123.endif
124SUBDIR+= stat .WAIT config
125.if ${TOOLS_BUILDRUMP} == "no"
126SUBDIR+= xz-bin
127.endif
128
129.if ${MKLLVM} != "no" || ${MKLLVMRT} != "no"
130SUBDIR+= \
131	llvm .WAIT \
132	llvm-lib/libLLVMDemangle llvm-lib/libLLVMSupport llvm-lib/libLLVMTableGen .WAIT \
133	llvm-tblgen
134.endif
135.if ${MKLLVM} != "no"
136SUBDIR+= \
137	llvm-clang-tblgen
138.endif
139.if ${MKLLVM} != "no" && !defined(EXTERNAL_TOOLCHAIN)
140SUBDIR+= \
141	.WAIT llvm-include .WAIT \
142	llvm-lib .WAIT \
143	llvm-clang
144.endif
145
146.if ${MKMAN} != "no" || ${MKDOC} != "no" || ${MKHTML} != "no"
147. if ${MKGROFF} != "no"
148SUBDIR+=	groff
149. endif
150SUBDIR+=	mandoc
151.endif
152
153.if ${TOOLS_BUILDRUMP} == "no"
154
155.if ${MKMAINTAINERTOOLS:Uno} != "no"
156SUBDIR+=	autoconf .WAIT gettext
157.endif
158
159.if ${USE_PIGZGZIP} != "no"
160SUBDIR+=	pigz
161.endif
162
163.if ${MACHINE} == "hppa"
164SUBDIR+=	hppa-mkboot
165.endif
166
167.if ${MACHINE} == "ibmnws"
168SUBDIR+=	ibmnws-ncdcs
169.endif
170
171.if ${MACHINE} == "macppc"
172SUBDIR+=	macppc-fixcoff
173.endif
174
175.if (${MACHINE} == "prep" || ${MACHINE} == "rs6000" || ${MACHINE} == "bebox")
176SUBDIR+=	powerpc-mkbootimage
177.endif
178
179.if ${MACHINE_CPU} == "arm"
180SUBDIR+=	arm-elf2aout
181.endif
182
183.if ${MACHINE_CPU} == "m68k"
184SUBDIR+=	m68k-elf2aout
185.endif
186
187.if !empty(MACHINE_ARCH:Mmips*)
188SUBDIR+=	mips-elf2ecoff
189.endif
190
191.if (${MACHINE} == "sgimips")
192SUBDIR+=	sgivol
193.endif
194
195.if ${MACHINE} == "acorn32"
196SUBDIR+=	sparkcrc
197.endif
198
199.if (${MACHINE_ARCH} == "sparc" || ${MACHINE_ARCH} == "sparc64")
200SUBDIR+=	fgen
201.endif
202
203.if ${MACHINE} == "amiga"
204SUBDIR+=	amiga-elf2bb
205SUBDIR+=	amiga-txlt
206.endif
207
208.if ${MACHINE} == "hp300"
209SUBDIR+=	hp300-mkboot
210.endif
211
212.if ${MACHINE} == "evbarm" \
213    && ${MACHINE_CPU} == "arm" \
214    && ${TARGET_ENDIANNESS} == "1234"
215SUBDIR+=	elftosb
216.endif
217
218.if ${MACHINE} == "evbarm" || ${MACHINE} == "evbmips" || \
219    ${MACHINE} == "evbppc" || ${MACHINE} == "evbsh3" || \
220    ${MACHINE} == "sandpoint"
221SUBDIR+=	mkubootimage
222.endif
223
224.if ${MACHINE} == "evbarm" || ${MACHINE} == "evbmips" || \
225    ${MACHINE} == "evbppc" || ${MACHINE} == "evbsh3" || \
226    ${MACHINE} == "sandpoint" || \
227    ${MACHINE_CPU} == "riscv"
228SUBDIR+=	libfdt .WAIT
229SUBDIR+=	dtc
230.endif
231
232.if ${MACHINE} == "mvme68k"
233SUBDIR+=	mvme68k-wrtvid
234.endif
235
236.if ${MKX11} != "no"
237SUBDIR+=	makestrs
238SUBDIR+=	makekeys
239.endif
240
241SUBDIR+= cvslatest
242
243.endif # TOOLS_BUILDRUMP != no
244
245check_MKTOOLS: .PHONY .NOTMAIN
246.if ${MKTOOLS:Uyes} == "no"
247	@echo '*** WARNING: "MKTOOLS" is set to "no"; this will prevent building and'
248	@echo '*** updating your host toolchain.  This should be used only as a'
249	@echo '*** temporary workaround for toolchain problems, as it will result'
250	@echo '*** in version skew and build errors over time!'
251.endif
252
253.if ${MKTOOLS:Uyes} == "no" || ${USETOOLS} != "yes"	# {
254SUBDIR= # empty
255realall realdepend install: check_MKTOOLS
256.endif							# }
257
258.include <bsd.subdir.mk>
259.include <bsd.buildinstall.mk>
260.include <bsd.obj.mk>
261
262.if !defined(PREVIOUSTOOLDIR)
263.  if exists(PREVIOUSTOOLDIR)
264PREVIOUSTOOLDIR!=	cat PREVIOUSTOOLDIR
265.  else
266PREVIOUSTOOLDIR=
267.  endif
268.endif
269
270CLEANFILES+=	PREVIOUSTOOLDIR
271
272realall realdepend: .MAKE
273.if !empty(PREVIOUSTOOLDIR) && "${PREVIOUSTOOLDIR}" != "${TOOLDIR}"
274	@echo "*** WARNING: TOOLDIR has moved?"
275	@echo "*** PREVIOUSTOOLDIR '${PREVIOUSTOOLDIR}'"
276	@echo "***     !=  TOOLDIR '${TOOLDIR}'"
277	@echo "*** Cleaning mis-matched tools"
278	rm -f PREVIOUSTOOLDIR
279	(cd ${.CURDIR} && ${MAKE} PREVIOUSTOOLDIR=${TOOLDIR} cleandir)
280.endif
281	echo ${TOOLDIR} >PREVIOUSTOOLDIR
282
283cleandir:
284	rm -f ${CLEANFILES}
285