Makefile revision 1.216
1 # $NetBSD: Makefile,v 1.216 2024/02/23 05:34:41 mrg Exp $ 2 3 .include <bsd.own.mk> 4 .include <bsd.endian.mk> 5 6 # Make sure that the ordered build/install processing applies when using 7 # plain make. 8 .MAIN: build_install 9 10 # TOOLDIR must be valid, unless MKTOOLS=no 11 .if ${MKTOOLS:Uyes} != "no" 12 .if "${TOOLDIR}" == "" 13 .error "TOOLDIR is undefined or empty" 14 .elif "${TOOLDIR:tW:M/*}" == "" 15 .error "TOOLDIR is not an absolute path: ${TOOLDIR}" 16 #.elif !exists(TOOLDIR) # XXX .exists fails for directories 17 #.error "TOOLDIR does not exist: ${TOOLDIR}" 18 .endif 19 .endif # MKTOOLS != no 20 21 # TOOLS_BUILDRUMP == yes builds only the subset of the tools required 22 # for building rump kernels and the hypervisor. It is typically used 23 # when building rump kernels targeted for non-NetBSD systems (via 24 # buildrump.sh), and should not be set for a regular "make build". 25 TOOLS_BUILDRUMP?=no 26 27 .if ${TOOLCHAIN_MISSING} == "no" 28 . if (defined(HAVE_GCC) && ${HAVE_GCC} > 0) || \ 29 (defined(HAVE_GDB) && ${HAVE_GDB} > 0 && ${MKCROSSGDB:Uno} != "no") 30 TOOLCHAIN_BITS+= gmake .WAIT 31 TOOLCHAIN_BITS+= gmp .WAIT 32 TOOLCHAIN_BITS+= mpfr .WAIT 33 TOOLCHAIN_BITS+= mpc .WAIT 34 . if (defined(HAVE_GCC) && ${HAVE_GCC} >= 12) 35 TOOLCHAIN_BITS+= isl .WAIT 36 . endif 37 . endif 38 39 TOOLCHAIN_BITS+= binutils .WAIT 40 41 . if defined(HAVE_GCC) && ${HAVE_GCC} > 0 42 TOOLCHAIN_BITS+= gcc 43 . endif 44 45 . if defined(HAVE_GDB) && ${HAVE_GDB} > 0 && ${MKCROSSGDB:Uno} != "no" 46 TOOLCHAIN_BITS+= gdb 47 . endif 48 49 TOOLCHAIN_BITS+= .WAIT 50 .endif 51 52 .if defined(HAVE_PCC) 53 . if ${TOOLCHAIN_MISSING} == "no" 54 TOOLCHAIN_BITS+= pcc 55 . endif 56 .endif 57 58 .if ${TOOLCHAIN_MISSING} == "no" || defined(EXTERNAL_TOOLCHAIN) 59 TOOLCHAIN_BITS+= dbsym mdsetimage 60 .endif 61 62 DTRACE_BITS= 63 .if ${MKDTRACE} != "no" || ${MKCTF} != "no" 64 DTRACE_BITS+= .WAIT elftoolchain 65 DTRACE_BITS+= .WAIT libctf 66 .endif 67 .if ${MKCTF} != "no" 68 DTRACE_BITS+= .WAIT ctfconvert ctfmerge 69 .endif 70 71 LINT_BITS= 72 .if ${MKLINT} != "no" 73 LINT_BITS= lint lint2 74 .endif 75 76 # All of host-mkdep, compat, and binstall are needed before anything 77 # else. Within this group, they must be built in a specific order, and 78 # all of them must be built before any of them is installed. They may 79 # be installed in any order. This can't be expressed using the .WAIT 80 # notation inside the SUBDIR list. 81 # 82 # XXX .ORDER does not work when multiple targets are passed on the 83 # make command line without "-j", so use dependencies in addition to .ORDER. 84 # 85 .ORDER: dependall-host-mkdep dependall-compat dependall-binstall \ 86 dependall-date 87 .if make(dependall-host-mkdep) && make(dependall-compat) 88 dependall-compat: dependall-host-mkdep 89 .endif 90 .if make(dependall-compat) && make(dependall-binstall) 91 dependall-binstall: dependall-compat 92 .endif 93 .if make(dependall-date) 94 dependall-date: dependall-host-mkdep dependall-compat 95 .endif 96 97 # Dependencies in SUBDIR below ordered to maximize parallel ability. 98 # See above for special treatment for host-mkdep, compat, and binstall. 99 # 100 SUBDIR= host-mkdep compat binstall date \ 101 .WAIT mktemp .WAIT sed .WAIT genassym 102 .if ${TOOLS_BUILDRUMP} == "no" 103 SUBDIR+= cap_mkdb crunchgen ctags gencat hexdump \ 104 ${LINT_BITS} \ 105 makewhatis mtree nbperf .WAIT uudecode 106 .endif 107 108 SUBDIR+= cat rpcgen join lorder m4 mkdep tsort .WAIT yacc .WAIT awk .WAIT lex 109 .if ${TOOLS_BUILDRUMP} == "no" 110 SUBDIR+= xz-include .WAIT grep xz-lib pax .WAIT libprop 111 112 SUBDIR += .WAIT texinfo \ 113 .WAIT tic \ 114 .WAIT ${TOOLCHAIN_BITS} \ 115 ${DTRACE_BITS} \ 116 asn1_compile cksum compile_et db \ 117 file lint1 slc \ 118 makefs sortinfo \ 119 .WAIT menuc mkcsmapper mkesdb mklocale mknod msgc \ 120 .WAIT disklabel gpt \ 121 .WAIT paxctl \ 122 .WAIT fdisk \ 123 .WAIT installboot \ 124 pwd_mkdb strfile sunlabel vgrind zic 125 .endif 126 SUBDIR+= stat .WAIT config 127 .if ${TOOLS_BUILDRUMP} == "no" 128 SUBDIR+= xz-bin 129 .endif 130 131 .if ${MKLLVM} != "no" || ${MKLLVMRT} != "no" 132 SUBDIR+= \ 133 llvm .WAIT \ 134 llvm-lib/libLLVMDemangle llvm-lib/libLLVMSupport llvm-lib/libLLVMTableGen .WAIT \ 135 llvm-tblgen 136 .endif 137 .if ${MKLLVM} != "no" 138 SUBDIR+= \ 139 llvm-clang-tblgen 140 .endif 141 .if ${MKLLVM} != "no" && !defined(EXTERNAL_TOOLCHAIN) 142 SUBDIR+= \ 143 .WAIT llvm-include .WAIT \ 144 llvm-lib .WAIT \ 145 llvm-clang 146 .endif 147 148 .if ${MKMAN} != "no" || ${MKDOC} != "no" || ${MKHTML} != "no" 149 . if ${MKGROFF} != "no" 150 SUBDIR+= groff 151 . endif 152 SUBDIR+= mandoc 153 .endif 154 155 .if ${TOOLS_BUILDRUMP} == "no" 156 157 .if ${MKMAINTAINERTOOLS:Uno} != "no" 158 SUBDIR+= autoconf .WAIT gettext 159 .endif 160 161 .if ${USE_PIGZGZIP} != "no" 162 SUBDIR+= pigz 163 .endif 164 165 .if ${MACHINE} == "hppa" 166 SUBDIR+= hppa-mkboot 167 .endif 168 169 .if ${MACHINE} == "ibmnws" 170 SUBDIR+= ibmnws-ncdcs 171 .endif 172 173 .if ${MACHINE} == "macppc" 174 SUBDIR+= macppc-fixcoff 175 .endif 176 177 .if (${MACHINE} == "prep" || ${MACHINE} == "rs6000" || ${MACHINE} == "bebox") 178 SUBDIR+= powerpc-mkbootimage 179 .endif 180 181 .if ${MACHINE_CPU} == "arm" 182 SUBDIR+= arm-elf2aout 183 .endif 184 185 .if ${MACHINE_CPU} == "m68k" 186 SUBDIR+= m68k-elf2aout 187 .endif 188 189 .if !empty(MACHINE_ARCH:Mmips*) 190 SUBDIR+= mips-elf2ecoff 191 .endif 192 193 .if (${MACHINE} == "sgimips") 194 SUBDIR+= sgivol 195 .endif 196 197 .if ${MACHINE} == "acorn32" 198 SUBDIR+= sparkcrc 199 .endif 200 201 .if (${MACHINE_ARCH} == "sparc" || ${MACHINE_ARCH} == "sparc64") 202 SUBDIR+= fgen 203 .endif 204 205 .if ${MACHINE} == "amiga" 206 SUBDIR+= amiga-elf2bb 207 SUBDIR+= amiga-txlt 208 .endif 209 210 .if ${MACHINE} == "hp300" 211 SUBDIR+= hp300-mkboot 212 .endif 213 214 .if ${MACHINE} == "evbarm" \ 215 && ${MACHINE_CPU} == "arm" \ 216 && ${TARGET_ENDIANNESS} == "1234" 217 SUBDIR+= elftosb 218 .endif 219 220 .if ${MACHINE} == "evbarm" || ${MACHINE} == "evbmips" || \ 221 ${MACHINE} == "evbppc" || ${MACHINE} == "evbsh3" || \ 222 ${MACHINE} == "sandpoint" 223 SUBDIR+= mkubootimage 224 .endif 225 226 .if ${MACHINE} == "evbarm" || ${MACHINE} == "evbmips" || \ 227 ${MACHINE} == "evbppc" || ${MACHINE} == "evbsh3" || \ 228 ${MACHINE} == "sandpoint" || \ 229 ${MACHINE_CPU} == "riscv" 230 SUBDIR+= libfdt .WAIT 231 SUBDIR+= dtc 232 .endif 233 234 .if ${MACHINE} == "mvme68k" 235 SUBDIR+= mvme68k-wrtvid 236 .endif 237 238 .if ${MKX11} != "no" 239 SUBDIR+= makestrs 240 SUBDIR+= makekeys 241 .endif 242 243 SUBDIR+= cvslatest 244 245 .endif # TOOLS_BUILDRUMP == no 246 247 check_MKTOOLS: .PHONY .NOTMAIN 248 .if ${MKTOOLS:Uyes} == "no" 249 @echo '*** WARNING: "MKTOOLS" is set to "no"; this will prevent building and' 250 @echo '*** updating your host toolchain. This should be used only as a' 251 @echo '*** temporary workaround for toolchain problems, as it will result' 252 @echo '*** in version skew and build errors over time!' 253 .endif 254 255 .if ${MKTOOLS:Uyes} == "no" || ${USETOOLS} != "yes" # { 256 SUBDIR= # empty 257 realall realdepend install: check_MKTOOLS 258 .endif # } 259 260 .include <bsd.subdir.mk> 261 .include <bsd.buildinstall.mk> 262 .include <bsd.obj.mk> 263 264 .if !defined(PREVIOUSTOOLDIR) 265 . if exists(PREVIOUSTOOLDIR) 266 PREVIOUSTOOLDIR!= cat PREVIOUSTOOLDIR 267 . else 268 PREVIOUSTOOLDIR= 269 . endif 270 .endif 271 272 CLEANFILES+= PREVIOUSTOOLDIR 273 274 realall realdepend: .MAKE 275 .if !empty(PREVIOUSTOOLDIR) && "${PREVIOUSTOOLDIR}" != "${TOOLDIR}" 276 @echo "*** WARNING: TOOLDIR has moved?" 277 @echo "*** PREVIOUSTOOLDIR '${PREVIOUSTOOLDIR}'" 278 @echo "*** != TOOLDIR '${TOOLDIR}'" 279 @echo "*** Cleaning mis-matched tools" 280 rm -f PREVIOUSTOOLDIR 281 (cd ${.CURDIR} && ${MAKE} PREVIOUSTOOLDIR=${TOOLDIR} cleandir) 282 .endif 283 echo ${TOOLDIR} >PREVIOUSTOOLDIR 284 285 cleandir: 286 rm -f ${CLEANFILES} 287
Indexes created Sat Oct 18 08:10:09 GMT 2025