parse.c revision 1.211
1 /* $NetBSD: parse.c,v 1.211 2016/02/18 18:29:14 christos Exp $ */ 2 3 /* 4 * Copyright (c) 1988, 1989, 1990, 1993 5 * The Regents of the University of California. All rights reserved. 6 * 7 * This code is derived from software contributed to Berkeley by 8 * Adam de Boor. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 3. Neither the name of the University nor the names of its contributors 19 * may be used to endorse or promote products derived from this software 20 * without specific prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 25 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 26 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 27 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 28 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 29 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 30 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 31 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 32 * SUCH DAMAGE. 33 */ 34 35 /* 36 * Copyright (c) 1989 by Berkeley Softworks 37 * All rights reserved. 38 * 39 * This code is derived from software contributed to Berkeley by 40 * Adam de Boor. 41 * 42 * Redistribution and use in source and binary forms, with or without 43 * modification, are permitted provided that the following conditions 44 * are met: 45 * 1. Redistributions of source code must retain the above copyright 46 * notice, this list of conditions and the following disclaimer. 47 * 2. Redistributions in binary form must reproduce the above copyright 48 * notice, this list of conditions and the following disclaimer in the 49 * documentation and/or other materials provided with the distribution. 50 * 3. All advertising materials mentioning features or use of this software 51 * must display the following acknowledgement: 52 * This product includes software developed by the University of 53 * California, Berkeley and its contributors. 54 * 4. Neither the name of the University nor the names of its contributors 55 * may be used to endorse or promote products derived from this software 56 * without specific prior written permission. 57 * 58 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 59 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 60 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 61 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 62 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 63 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 64 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 65 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 66 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 67 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 68 * SUCH DAMAGE. 69 */ 70 71 #ifndef MAKE_NATIVE 72 static char rcsid[] = "$NetBSD: parse.c,v 1.211 2016/02/18 18:29:14 christos Exp $"; 73 #else 74 #include <sys/cdefs.h> 75 #ifndef lint 76 #if 0 77 static char sccsid[] = "@(#)parse.c 8.3 (Berkeley) 3/19/94"; 78 #else 79 __RCSID("$NetBSD: parse.c,v 1.211 2016/02/18 18:29:14 christos Exp $"); 80 #endif 81 #endif /* not lint */ 82 #endif 83 84 /*- 85 * parse.c -- 86 * Functions to parse a makefile. 87 * 88 * One function, Parse_Init, must be called before any functions 89 * in this module are used. After that, the function Parse_File is the 90 * main entry point and controls most of the other functions in this 91 * module. 92 * 93 * Most important structures are kept in Lsts. Directories for 94 * the .include "..." function are kept in the 'parseIncPath' Lst, while 95 * those for the .include <...> are kept in the 'sysIncPath' Lst. The 96 * targets currently being defined are kept in the 'targets' Lst. 97 * 98 * The variables 'fname' and 'lineno' are used to track the name 99 * of the current file and the line number in that file so that error 100 * messages can be more meaningful. 101 * 102 * Interface: 103 * Parse_Init Initialization function which must be 104 * called before anything else in this module 105 * is used. 106 * 107 * Parse_End Cleanup the module 108 * 109 * Parse_File Function used to parse a makefile. It must 110 * be given the name of the file, which should 111 * already have been opened, and a function 112 * to call to read a character from the file. 113 * 114 * Parse_IsVar Returns TRUE if the given line is a 115 * variable assignment. Used by MainParseArgs 116 * to determine if an argument is a target 117 * or a variable assignment. Used internally 118 * for pretty much the same thing... 119 * 120 * Parse_Error Function called when an error occurs in 121 * parsing. Used by the variable and 122 * conditional modules. 123 * Parse_MainName Returns a Lst of the main target to create. 124 */ 125 126 #include <sys/types.h> 127 #include <sys/mman.h> 128 #include <sys/stat.h> 129 #include <assert.h> 130 #include <ctype.h> 131 #include <errno.h> 132 #include <stdarg.h> 133 #include <stdio.h> 134 135 #ifndef MAP_FILE 136 #define MAP_FILE 0 137 #endif 138 #ifndef MAP_COPY 139 #define MAP_COPY MAP_PRIVATE 140 #endif 141 142 #include "make.h" 143 #include "hash.h" 144 #include "dir.h" 145 #include "job.h" 146 #include "buf.h" 147 #include "pathnames.h" 148 149 //////////////////////////////////////////////////////////// 150 // types and constants 151 152 /* 153 * Structure for a file being read ("included file") 154 */ 155 typedef struct IFile { 156 char *fname; /* name of file */ 157 int lineno; /* current line number in file */ 158 int first_lineno; /* line number of start of text */ 159 int cond_depth; /* 'if' nesting when file opened */ 160 Boolean depending; /* state of doing_depend on EOF */ 161 char *P_str; /* point to base of string buffer */ 162 char *P_ptr; /* point to next char of string buffer */ 163 char *P_end; /* point to the end of string buffer */ 164 char *(*nextbuf)(void *, size_t *); /* Function to get more data */ 165 void *nextbuf_arg; /* Opaque arg for nextbuf() */ 166 struct loadedfile *lf; /* loadedfile object, if any */ 167 } IFile; 168 169 170 /* 171 * These values are returned by ParseEOF to tell Parse_File whether to 172 * CONTINUE parsing, i.e. it had only reached the end of an include file, 173 * or if it's DONE. 174 */ 175 #define CONTINUE 1 176 #define DONE 0 177 178 /* 179 * Tokens for target attributes 180 */ 181 typedef enum { 182 Begin, /* .BEGIN */ 183 Default, /* .DEFAULT */ 184 End, /* .END */ 185 dotError, /* .ERROR */ 186 Ignore, /* .IGNORE */ 187 Includes, /* .INCLUDES */ 188 Interrupt, /* .INTERRUPT */ 189 Libs, /* .LIBS */ 190 Meta, /* .META */ 191 MFlags, /* .MFLAGS or .MAKEFLAGS */ 192 Main, /* .MAIN and we don't have anything user-specified to 193 * make */ 194 NoExport, /* .NOEXPORT */ 195 NoMeta, /* .NOMETA */ 196 NoMetaCmp, /* .NOMETA_CMP */ 197 NoPath, /* .NOPATH */ 198 Not, /* Not special */ 199 NotParallel, /* .NOTPARALLEL */ 200 Null, /* .NULL */ 201 ExObjdir, /* .OBJDIR */ 202 Order, /* .ORDER */ 203 Parallel, /* .PARALLEL */ 204 ExPath, /* .PATH */ 205 Phony, /* .PHONY */ 206 #ifdef POSIX 207 Posix, /* .POSIX */ 208 #endif 209 Precious, /* .PRECIOUS */ 210 ExShell, /* .SHELL */ 211 Silent, /* .SILENT */ 212 SingleShell, /* .SINGLESHELL */ 213 Stale, /* .STALE */ 214 Suffixes, /* .SUFFIXES */ 215 Wait, /* .WAIT */ 216 Attribute /* Generic attribute */ 217 } ParseSpecial; 218 219 /* 220 * Other tokens 221 */ 222 #define LPAREN '(' 223 #define RPAREN ')' 224 225 226 //////////////////////////////////////////////////////////// 227 // result data 228 229 /* 230 * The main target to create. This is the first target on the first 231 * dependency line in the first makefile. 232 */ 233 static GNode *mainNode; 234 235 //////////////////////////////////////////////////////////// 236 // eval state 237 238 /* targets we're working on */ 239 static Lst targets; 240 241 #ifdef CLEANUP 242 /* command lines for targets */ 243 static Lst targCmds; 244 #endif 245 246 /* 247 * specType contains the SPECial TYPE of the current target. It is 248 * Not if the target is unspecial. If it *is* special, however, the children 249 * are linked as children of the parent but not vice versa. This variable is 250 * set in ParseDoDependency 251 */ 252 static ParseSpecial specType; 253 254 /* 255 * Predecessor node for handling .ORDER. Initialized to NULL when .ORDER 256 * seen, then set to each successive source on the line. 257 */ 258 static GNode *predecessor; 259 260 //////////////////////////////////////////////////////////// 261 // parser state 262 263 /* true if currently in a dependency line or its commands */ 264 static Boolean inLine; 265 266 /* number of fatal errors */ 267 static int fatals = 0; 268 269 /* 270 * Variables for doing includes 271 */ 272 273 /* current file being read */ 274 static IFile *curFile; 275 276 /* stack of IFiles generated by .includes */ 277 static Lst includes; 278 279 /* include paths (lists of directories) */ 280 Lst parseIncPath; /* dirs for "..." includes */ 281 Lst sysIncPath; /* dirs for <...> includes */ 282 Lst defIncPath; /* default for sysIncPath */ 283 284 //////////////////////////////////////////////////////////// 285 // parser tables 286 287 /* 288 * The parseKeywords table is searched using binary search when deciding 289 * if a target or source is special. The 'spec' field is the ParseSpecial 290 * type of the keyword ("Not" if the keyword isn't special as a target) while 291 * the 'op' field is the operator to apply to the list of targets if the 292 * keyword is used as a source ("0" if the keyword isn't special as a source) 293 */ 294 static const struct { 295 const char *name; /* Name of keyword */ 296 ParseSpecial spec; /* Type when used as a target */ 297 int op; /* Operator when used as a source */ 298 } parseKeywords[] = { 299 { ".BEGIN", Begin, 0 }, 300 { ".DEFAULT", Default, 0 }, 301 { ".END", End, 0 }, 302 { ".ERROR", dotError, 0 }, 303 { ".EXEC", Attribute, OP_EXEC }, 304 { ".IGNORE", Ignore, OP_IGNORE }, 305 { ".INCLUDES", Includes, 0 }, 306 { ".INTERRUPT", Interrupt, 0 }, 307 { ".INVISIBLE", Attribute, OP_INVISIBLE }, 308 { ".JOIN", Attribute, OP_JOIN }, 309 { ".LIBS", Libs, 0 }, 310 { ".MADE", Attribute, OP_MADE }, 311 { ".MAIN", Main, 0 }, 312 { ".MAKE", Attribute, OP_MAKE }, 313 { ".MAKEFLAGS", MFlags, 0 }, 314 { ".META", Meta, OP_META }, 315 { ".MFLAGS", MFlags, 0 }, 316 { ".NOMETA", NoMeta, OP_NOMETA }, 317 { ".NOMETA_CMP", NoMetaCmp, OP_NOMETA_CMP }, 318 { ".NOPATH", NoPath, OP_NOPATH }, 319 { ".NOTMAIN", Attribute, OP_NOTMAIN }, 320 { ".NOTPARALLEL", NotParallel, 0 }, 321 { ".NO_PARALLEL", NotParallel, 0 }, 322 { ".NULL", Null, 0 }, 323 { ".OBJDIR", ExObjdir, 0 }, 324 { ".OPTIONAL", Attribute, OP_OPTIONAL }, 325 { ".ORDER", Order, 0 }, 326 { ".PARALLEL", Parallel, 0 }, 327 { ".PATH", ExPath, 0 }, 328 { ".PHONY", Phony, OP_PHONY }, 329 #ifdef POSIX 330 { ".POSIX", Posix, 0 }, 331 #endif 332 { ".PRECIOUS", Precious, OP_PRECIOUS }, 333 { ".RECURSIVE", Attribute, OP_MAKE }, 334 { ".SHELL", ExShell, 0 }, 335 { ".SILENT", Silent, OP_SILENT }, 336 { ".SINGLESHELL", SingleShell, 0 }, 337 { ".STALE", Stale, 0 }, 338 { ".SUFFIXES", Suffixes, 0 }, 339 { ".USE", Attribute, OP_USE }, 340 { ".USEBEFORE", Attribute, OP_USEBEFORE }, 341 { ".WAIT", Wait, 0 }, 342 }; 343 344 //////////////////////////////////////////////////////////// 345 // local functions 346 347 static int ParseIsEscaped(const char *, const char *); 348 static void ParseErrorInternal(const char *, size_t, int, const char *, ...) 349 MAKE_ATTR_PRINTFLIKE(4,5); 350 static void ParseVErrorInternal(FILE *, const char *, size_t, int, const char *, va_list) 351 MAKE_ATTR_PRINTFLIKE(5, 0); 352 static int ParseFindKeyword(const char *); 353 static int ParseLinkSrc(void *, void *); 354 static int ParseDoOp(void *, void *); 355 static void ParseDoSrc(int, const char *); 356 static int ParseFindMain(void *, void *); 357 static int ParseAddDir(void *, void *); 358 static int ParseClearPath(void *, void *); 359 static void ParseDoDependency(char *); 360 static int ParseAddCmd(void *, void *); 361 static void ParseHasCommands(void *); 362 static void ParseDoInclude(char *); 363 static void ParseSetParseFile(const char *); 364 static void ParseSetIncludedFile(void); 365 #ifdef SYSVINCLUDE 366 static void ParseTraditionalInclude(char *); 367 #endif 368 #ifdef GMAKEEXPORT 369 static void ParseGmakeExport(char *); 370 #endif 371 static int ParseEOF(void); 372 static char *ParseReadLine(void); 373 static void ParseFinishLine(void); 374 static void ParseMark(GNode *); 375 376 //////////////////////////////////////////////////////////// 377 // file loader 378 379 struct loadedfile { 380 const char *path; /* name, for error reports */ 381 char *buf; /* contents buffer */ 382 size_t len; /* length of contents */ 383 size_t maplen; /* length of mmap area, or 0 */ 384 Boolean used; /* XXX: have we used the data yet */ 385 }; 386 387 /* 388 * Constructor/destructor for loadedfile 389 */ 390 static struct loadedfile * 391 loadedfile_create(const char *path) 392 { 393 struct loadedfile *lf; 394 395 lf = bmake_malloc(sizeof(*lf)); 396 lf->path = (path == NULL ? "(stdin)" : path); 397 lf->buf = NULL; 398 lf->len = 0; 399 lf->maplen = 0; 400 lf->used = FALSE; 401 return lf; 402 } 403 404 static void 405 loadedfile_destroy(struct loadedfile *lf) 406 { 407 if (lf->buf != NULL) { 408 if (lf->maplen > 0) { 409 munmap(lf->buf, lf->maplen); 410 } else { 411 free(lf->buf); 412 } 413 } 414 free(lf); 415 } 416 417 /* 418 * nextbuf() operation for loadedfile, as needed by the weird and twisted 419 * logic below. Once that's cleaned up, we can get rid of lf->used... 420 */ 421 static char * 422 loadedfile_nextbuf(void *x, size_t *len) 423 { 424 struct loadedfile *lf = x; 425 426 if (lf->used) { 427 return NULL; 428 } 429 lf->used = TRUE; 430 *len = lf->len; 431 return lf->buf; 432 } 433 434 /* 435 * Try to get the size of a file. 436 */ 437 static ReturnStatus 438 load_getsize(int fd, size_t *ret) 439 { 440 struct stat st; 441 442 if (fstat(fd, &st) < 0) { 443 return FAILURE; 444 } 445 446 if (!S_ISREG(st.st_mode)) { 447 return FAILURE; 448 } 449 450 /* 451 * st_size is an off_t, which is 64 bits signed; *ret is 452 * size_t, which might be 32 bits unsigned or 64 bits 453 * unsigned. Rather than being elaborate, just punt on 454 * files that are more than 2^31 bytes. We should never 455 * see a makefile that size in practice... 456 * 457 * While we're at it reject negative sizes too, just in case. 458 */ 459 if (st.st_size < 0 || st.st_size > 0x7fffffff) { 460 return FAILURE; 461 } 462 463 *ret = (size_t) st.st_size; 464 return SUCCESS; 465 } 466 467 /* 468 * Read in a file. 469 * 470 * Until the path search logic can be moved under here instead of 471 * being in the caller in another source file, we need to have the fd 472 * passed in already open. Bleh. 473 * 474 * If the path is NULL use stdin and (to insure against fd leaks) 475 * assert that the caller passed in -1. 476 */ 477 static struct loadedfile * 478 loadfile(const char *path, int fd) 479 { 480 struct loadedfile *lf; 481 long pagesize; 482 ssize_t result; 483 size_t bufpos; 484 485 lf = loadedfile_create(path); 486 487 if (path == NULL) { 488 assert(fd == -1); 489 fd = STDIN_FILENO; 490 } else { 491 #if 0 /* notyet */ 492 fd = open(path, O_RDONLY); 493 if (fd < 0) { 494 ... 495 Error("%s: %s", path, strerror(errno)); 496 exit(1); 497 } 498 #endif 499 } 500 501 if (load_getsize(fd, &lf->len) == SUCCESS) { 502 /* found a size, try mmap */ 503 pagesize = sysconf(_SC_PAGESIZE); 504 if (pagesize <= 0) { 505 pagesize = 0x1000; 506 } 507 /* round size up to a page */ 508 lf->maplen = pagesize * ((lf->len + pagesize - 1)/pagesize); 509 510 /* 511 * XXX hack for dealing with empty files; remove when 512 * we're no longer limited by interfacing to the old 513 * logic elsewhere in this file. 514 */ 515 if (lf->maplen == 0) { 516 lf->maplen = pagesize; 517 } 518 519 /* 520 * FUTURE: remove PROT_WRITE when the parser no longer 521 * needs to scribble on the input. 522 */ 523 lf->buf = mmap(NULL, lf->maplen, PROT_READ|PROT_WRITE, 524 MAP_FILE|MAP_COPY, fd, 0); 525 if (lf->buf != MAP_FAILED) { 526 /* succeeded */ 527 if (lf->len == lf->maplen && lf->buf[lf->len - 1] != '\n') { 528 char *b = malloc(lf->len + 1); 529 b[lf->len] = '\n'; 530 memcpy(b, lf->buf, lf->len++); 531 munmap(lf->buf, lf->maplen); 532 lf->maplen = 0; 533 lf->buf = b; 534 } 535 goto done; 536 } 537 } 538 539 /* cannot mmap; load the traditional way */ 540 541 lf->maplen = 0; 542 lf->len = 1024; 543 lf->buf = bmake_malloc(lf->len); 544 545 bufpos = 0; 546 while (1) { 547 assert(bufpos <= lf->len); 548 if (bufpos == lf->len) { 549 lf->len *= 2; 550 lf->buf = bmake_realloc(lf->buf, lf->len); 551 } 552 result = read(fd, lf->buf + bufpos, lf->len - bufpos); 553 if (result < 0) { 554 Error("%s: read error: %s", path, strerror(errno)); 555 exit(1); 556 } 557 if (result == 0) { 558 break; 559 } 560 bufpos += result; 561 } 562 assert(bufpos <= lf->len); 563 lf->len = bufpos; 564 565 /* truncate malloc region to actual length (maybe not useful) */ 566 if (lf->len > 0) { 567 lf->buf = bmake_realloc(lf->buf, lf->len); 568 } 569 570 done: 571 if (path != NULL) { 572 close(fd); 573 } 574 return lf; 575 } 576 577 //////////////////////////////////////////////////////////// 578 // old code 579 580 /*- 581 *---------------------------------------------------------------------- 582 * ParseIsEscaped -- 583 * Check if the current character is escaped on the current line 584 * 585 * Results: 586 * 0 if the character is not backslash escaped, 1 otherwise 587 * 588 * Side Effects: 589 * None 590 *---------------------------------------------------------------------- 591 */ 592 static int 593 ParseIsEscaped(const char *line, const char *c) 594 { 595 int active = 0; 596 for (;;) { 597 if (line == c) 598 return active; 599 if (*--c != '\\') 600 return active; 601 active = !active; 602 } 603 } 604 605 /*- 606 *---------------------------------------------------------------------- 607 * ParseFindKeyword -- 608 * Look in the table of keywords for one matching the given string. 609 * 610 * Input: 611 * str String to find 612 * 613 * Results: 614 * The index of the keyword, or -1 if it isn't there. 615 * 616 * Side Effects: 617 * None 618 *---------------------------------------------------------------------- 619 */ 620 static int 621 ParseFindKeyword(const char *str) 622 { 623 int start, end, cur; 624 int diff; 625 626 start = 0; 627 end = (sizeof(parseKeywords)/sizeof(parseKeywords[0])) - 1; 628 629 do { 630 cur = start + ((end - start) / 2); 631 diff = strcmp(str, parseKeywords[cur].name); 632 633 if (diff == 0) { 634 return (cur); 635 } else if (diff < 0) { 636 end = cur - 1; 637 } else { 638 start = cur + 1; 639 } 640 } while (start <= end); 641 return (-1); 642 } 643 644 /*- 645 * ParseVErrorInternal -- 646 * Error message abort function for parsing. Prints out the context 647 * of the error (line number and file) as well as the message with 648 * two optional arguments. 649 * 650 * Results: 651 * None 652 * 653 * Side Effects: 654 * "fatals" is incremented if the level is PARSE_FATAL. 655 */ 656 /* VARARGS */ 657 static void 658 ParseVErrorInternal(FILE *f, const char *cfname, size_t clineno, int type, 659 const char *fmt, va_list ap) 660 { 661 static Boolean fatal_warning_error_printed = FALSE; 662 663 (void)fprintf(f, "%s: ", progname); 664 665 if (cfname != NULL) { 666 (void)fprintf(f, "\""); 667 if (*cfname != '/' && strcmp(cfname, "(stdin)") != 0) { 668 char *cp; 669 const char *dir; 670 671 /* 672 * Nothing is more annoying than not knowing 673 * which Makefile is the culprit. 674 */ 675 dir = Var_Value(".PARSEDIR", VAR_GLOBAL, &cp); 676 if (dir == NULL || *dir == '\0' || 677 (*dir == '.' && dir[1] == '\0')) 678 dir = Var_Value(".CURDIR", VAR_GLOBAL, &cp); 679 if (dir == NULL) 680 dir = "."; 681 682 (void)fprintf(f, "%s/%s", dir, cfname); 683 } else 684 (void)fprintf(f, "%s", cfname); 685 686 (void)fprintf(f, "\" line %d: ", (int)clineno); 687 } 688 if (type == PARSE_WARNING) 689 (void)fprintf(f, "warning: "); 690 (void)vfprintf(f, fmt, ap); 691 (void)fprintf(f, "\n"); 692 (void)fflush(f); 693 if (type == PARSE_FATAL || parseWarnFatal) 694 fatals += 1; 695 if (parseWarnFatal && !fatal_warning_error_printed) { 696 Error("parsing warnings being treated as errors"); 697 fatal_warning_error_printed = TRUE; 698 } 699 } 700 701 /*- 702 * ParseErrorInternal -- 703 * Error function 704 * 705 * Results: 706 * None 707 * 708 * Side Effects: 709 * None 710 */ 711 /* VARARGS */ 712 static void 713 ParseErrorInternal(const char *cfname, size_t clineno, int type, 714 const char *fmt, ...) 715 { 716 va_list ap; 717 718 va_start(ap, fmt); 719 (void)fflush(stdout); 720 ParseVErrorInternal(stderr, cfname, clineno, type, fmt, ap); 721 va_end(ap); 722 723 if (debug_file != stderr && debug_file != stdout) { 724 va_start(ap, fmt); 725 ParseVErrorInternal(debug_file, cfname, clineno, type, fmt, ap); 726 va_end(ap); 727 } 728 } 729 730 /*- 731 * Parse_Error -- 732 * External interface to ParseErrorInternal; uses the default filename 733 * Line number. 734 * 735 * Results: 736 * None 737 * 738 * Side Effects: 739 * None 740 */ 741 /* VARARGS */ 742 void 743 Parse_Error(int type, const char *fmt, ...) 744 { 745 va_list ap; 746 const char *fname; 747 size_t lineno; 748 749 if (curFile == NULL) { 750 fname = NULL; 751 lineno = 0; 752 } else { 753 fname = curFile->fname; 754 lineno = curFile->lineno; 755 } 756 757 va_start(ap, fmt); 758 (void)fflush(stdout); 759 ParseVErrorInternal(stderr, fname, lineno, type, fmt, ap); 760 va_end(ap); 761 762 if (debug_file != stderr && debug_file != stdout) { 763 va_start(ap, fmt); 764 ParseVErrorInternal(debug_file, fname, lineno, type, fmt, ap); 765 va_end(ap); 766 } 767 } 768 769 770 /* 771 * ParseMessage 772 * Parse a .info .warning or .error directive 773 * 774 * The input is the line minus the ".". We substitute 775 * variables, print the message and exit(1) (for .error) or just print 776 * a warning if the directive is malformed. 777 */ 778 static Boolean 779 ParseMessage(char *line) 780 { 781 int mtype; 782 783 switch(*line) { 784 case 'i': 785 mtype = 0; 786 break; 787 case 'w': 788 mtype = PARSE_WARNING; 789 break; 790 case 'e': 791 mtype = PARSE_FATAL; 792 break; 793 default: 794 Parse_Error(PARSE_WARNING, "invalid syntax: \".%s\"", line); 795 return FALSE; 796 } 797 798 while (isalpha((u_char)*line)) 799 line++; 800 if (!isspace((u_char)*line)) 801 return FALSE; /* not for us */ 802 while (isspace((u_char)*line)) 803 line++; 804 805 line = Var_Subst(NULL, line, VAR_CMD, VARF_WANTRES); 806 Parse_Error(mtype, "%s", line); 807 free(line); 808 809 if (mtype == PARSE_FATAL) { 810 /* Terminate immediately. */ 811 exit(1); 812 } 813 return TRUE; 814 } 815 816 /*- 817 *--------------------------------------------------------------------- 818 * ParseLinkSrc -- 819 * Link the parent node to its new child. Used in a Lst_ForEach by 820 * ParseDoDependency. If the specType isn't 'Not', the parent 821 * isn't linked as a parent of the child. 822 * 823 * Input: 824 * pgnp The parent node 825 * cgpn The child node 826 * 827 * Results: 828 * Always = 0 829 * 830 * Side Effects: 831 * New elements are added to the parents list of cgn and the 832 * children list of cgn. the unmade field of pgn is updated 833 * to reflect the additional child. 834 *--------------------------------------------------------------------- 835 */ 836 static int 837 ParseLinkSrc(void *pgnp, void *cgnp) 838 { 839 GNode *pgn = (GNode *)pgnp; 840 GNode *cgn = (GNode *)cgnp; 841 842 if ((pgn->type & OP_DOUBLEDEP) && !Lst_IsEmpty (pgn->cohorts)) 843 pgn = (GNode *)Lst_Datum(Lst_Last(pgn->cohorts)); 844 (void)Lst_AtEnd(pgn->children, cgn); 845 if (specType == Not) 846 (void)Lst_AtEnd(cgn->parents, pgn); 847 pgn->unmade += 1; 848 if (DEBUG(PARSE)) { 849 fprintf(debug_file, "# %s: added child %s - %s\n", __func__, 850 pgn->name, cgn->name); 851 Targ_PrintNode(pgn, 0); 852 Targ_PrintNode(cgn, 0); 853 } 854 return (0); 855 } 856 857 /*- 858 *--------------------------------------------------------------------- 859 * ParseDoOp -- 860 * Apply the parsed operator to the given target node. Used in a 861 * Lst_ForEach call by ParseDoDependency once all targets have 862 * been found and their operator parsed. If the previous and new 863 * operators are incompatible, a major error is taken. 864 * 865 * Input: 866 * gnp The node to which the operator is to be applied 867 * opp The operator to apply 868 * 869 * Results: 870 * Always 0 871 * 872 * Side Effects: 873 * The type field of the node is altered to reflect any new bits in 874 * the op. 875 *--------------------------------------------------------------------- 876 */ 877 static int 878 ParseDoOp(void *gnp, void *opp) 879 { 880 GNode *gn = (GNode *)gnp; 881 int op = *(int *)opp; 882 /* 883 * If the dependency mask of the operator and the node don't match and 884 * the node has actually had an operator applied to it before, and 885 * the operator actually has some dependency information in it, complain. 886 */ 887 if (((op & OP_OPMASK) != (gn->type & OP_OPMASK)) && 888 !OP_NOP(gn->type) && !OP_NOP(op)) 889 { 890 Parse_Error(PARSE_FATAL, "Inconsistent operator for %s", gn->name); 891 return (1); 892 } 893 894 if ((op == OP_DOUBLEDEP) && ((gn->type & OP_OPMASK) == OP_DOUBLEDEP)) { 895 /* 896 * If the node was the object of a :: operator, we need to create a 897 * new instance of it for the children and commands on this dependency 898 * line. The new instance is placed on the 'cohorts' list of the 899 * initial one (note the initial one is not on its own cohorts list) 900 * and the new instance is linked to all parents of the initial 901 * instance. 902 */ 903 GNode *cohort; 904 905 /* 906 * Propagate copied bits to the initial node. They'll be propagated 907 * back to the rest of the cohorts later. 908 */ 909 gn->type |= op & ~OP_OPMASK; 910 911 cohort = Targ_FindNode(gn->name, TARG_NOHASH); 912 if (doing_depend) 913 ParseMark(cohort); 914 /* 915 * Make the cohort invisible as well to avoid duplicating it into 916 * other variables. True, parents of this target won't tend to do 917 * anything with their local variables, but better safe than 918 * sorry. (I think this is pointless now, since the relevant list 919 * traversals will no longer see this node anyway. -mycroft) 920 */ 921 cohort->type = op | OP_INVISIBLE; 922 (void)Lst_AtEnd(gn->cohorts, cohort); 923 cohort->centurion = gn; 924 gn->unmade_cohorts += 1; 925 snprintf(cohort->cohort_num, sizeof cohort->cohort_num, "#%d", 926 gn->unmade_cohorts); 927 } else { 928 /* 929 * We don't want to nuke any previous flags (whatever they were) so we 930 * just OR the new operator into the old 931 */ 932 gn->type |= op; 933 } 934 935 return (0); 936 } 937 938 /*- 939 *--------------------------------------------------------------------- 940 * ParseDoSrc -- 941 * Given the name of a source, figure out if it is an attribute 942 * and apply it to the targets if it is. Else decide if there is 943 * some attribute which should be applied *to* the source because 944 * of some special target and apply it if so. Otherwise, make the 945 * source be a child of the targets in the list 'targets' 946 * 947 * Input: 948 * tOp operator (if any) from special targets 949 * src name of the source to handle 950 * 951 * Results: 952 * None 953 * 954 * Side Effects: 955 * Operator bits may be added to the list of targets or to the source. 956 * The targets may have a new source added to their lists of children. 957 *--------------------------------------------------------------------- 958 */ 959 static void 960 ParseDoSrc(int tOp, const char *src) 961 { 962 GNode *gn = NULL; 963 static int wait_number = 0; 964 char wait_src[16]; 965 966 if (*src == '.' && isupper ((unsigned char)src[1])) { 967 int keywd = ParseFindKeyword(src); 968 if (keywd != -1) { 969 int op = parseKeywords[keywd].op; 970 if (op != 0) { 971 Lst_ForEach(targets, ParseDoOp, &op); 972 return; 973 } 974 if (parseKeywords[keywd].spec == Wait) { 975 /* 976 * We add a .WAIT node in the dependency list. 977 * After any dynamic dependencies (and filename globbing) 978 * have happened, it is given a dependency on the each 979 * previous child back to and previous .WAIT node. 980 * The next child won't be scheduled until the .WAIT node 981 * is built. 982 * We give each .WAIT node a unique name (mainly for diag). 983 */ 984 snprintf(wait_src, sizeof wait_src, ".WAIT_%u", ++wait_number); 985 gn = Targ_FindNode(wait_src, TARG_NOHASH); 986 if (doing_depend) 987 ParseMark(gn); 988 gn->type = OP_WAIT | OP_PHONY | OP_DEPENDS | OP_NOTMAIN; 989 Lst_ForEach(targets, ParseLinkSrc, gn); 990 return; 991 } 992 } 993 } 994 995 switch (specType) { 996 case Main: 997 /* 998 * If we have noted the existence of a .MAIN, it means we need 999 * to add the sources of said target to the list of things 1000 * to create. The string 'src' is likely to be free, so we 1001 * must make a new copy of it. Note that this will only be 1002 * invoked if the user didn't specify a target on the command 1003 * line. This is to allow #ifmake's to succeed, or something... 1004 */ 1005 (void)Lst_AtEnd(create, bmake_strdup(src)); 1006 /* 1007 * Add the name to the .TARGETS variable as well, so the user can 1008 * employ that, if desired. 1009 */ 1010 Var_Append(".TARGETS", src, VAR_GLOBAL); 1011 return; 1012 1013 case Order: 1014 /* 1015 * Create proper predecessor/successor links between the previous 1016 * source and the current one. 1017 */ 1018 gn = Targ_FindNode(src, TARG_CREATE); 1019 if (doing_depend) 1020 ParseMark(gn); 1021 if (predecessor != NULL) { 1022 (void)Lst_AtEnd(predecessor->order_succ, gn); 1023 (void)Lst_AtEnd(gn->order_pred, predecessor); 1024 if (DEBUG(PARSE)) { 1025 fprintf(debug_file, "# %s: added Order dependency %s - %s\n", 1026 __func__, predecessor->name, gn->name); 1027 Targ_PrintNode(predecessor, 0); 1028 Targ_PrintNode(gn, 0); 1029 } 1030 } 1031 /* 1032 * The current source now becomes the predecessor for the next one. 1033 */ 1034 predecessor = gn; 1035 break; 1036 1037 default: 1038 /* 1039 * If the source is not an attribute, we need to find/create 1040 * a node for it. After that we can apply any operator to it 1041 * from a special target or link it to its parents, as 1042 * appropriate. 1043 * 1044 * In the case of a source that was the object of a :: operator, 1045 * the attribute is applied to all of its instances (as kept in 1046 * the 'cohorts' list of the node) or all the cohorts are linked 1047 * to all the targets. 1048 */ 1049 1050 /* Find/create the 'src' node and attach to all targets */ 1051 gn = Targ_FindNode(src, TARG_CREATE); 1052 if (doing_depend) 1053 ParseMark(gn); 1054 if (tOp) { 1055 gn->type |= tOp; 1056 } else { 1057 Lst_ForEach(targets, ParseLinkSrc, gn); 1058 } 1059 break; 1060 } 1061 } 1062 1063 /*- 1064 *----------------------------------------------------------------------- 1065 * ParseFindMain -- 1066 * Find a real target in the list and set it to be the main one. 1067 * Called by ParseDoDependency when a main target hasn't been found 1068 * yet. 1069 * 1070 * Input: 1071 * gnp Node to examine 1072 * 1073 * Results: 1074 * 0 if main not found yet, 1 if it is. 1075 * 1076 * Side Effects: 1077 * mainNode is changed and Targ_SetMain is called. 1078 * 1079 *----------------------------------------------------------------------- 1080 */ 1081 static int 1082 ParseFindMain(void *gnp, void *dummy) 1083 { 1084 GNode *gn = (GNode *)gnp; 1085 if ((gn->type & OP_NOTARGET) == 0) { 1086 mainNode = gn; 1087 Targ_SetMain(gn); 1088 return (dummy ? 1 : 1); 1089 } else { 1090 return (dummy ? 0 : 0); 1091 } 1092 } 1093 1094 /*- 1095 *----------------------------------------------------------------------- 1096 * ParseAddDir -- 1097 * Front-end for Dir_AddDir to make sure Lst_ForEach keeps going 1098 * 1099 * Results: 1100 * === 0 1101 * 1102 * Side Effects: 1103 * See Dir_AddDir. 1104 * 1105 *----------------------------------------------------------------------- 1106 */ 1107 static int 1108 ParseAddDir(void *path, void *name) 1109 { 1110 (void)Dir_AddDir((Lst) path, (char *)name); 1111 return(0); 1112 } 1113 1114 /*- 1115 *----------------------------------------------------------------------- 1116 * ParseClearPath -- 1117 * Front-end for Dir_ClearPath to make sure Lst_ForEach keeps going 1118 * 1119 * Results: 1120 * === 0 1121 * 1122 * Side Effects: 1123 * See Dir_ClearPath 1124 * 1125 *----------------------------------------------------------------------- 1126 */ 1127 static int 1128 ParseClearPath(void *path, void *dummy) 1129 { 1130 Dir_ClearPath((Lst) path); 1131 return(dummy ? 0 : 0); 1132 } 1133 1134 /*- 1135 *--------------------------------------------------------------------- 1136 * ParseDoDependency -- 1137 * Parse the dependency line in line. 1138 * 1139 * Input: 1140 * line the line to parse 1141 * 1142 * Results: 1143 * None 1144 * 1145 * Side Effects: 1146 * The nodes of the sources are linked as children to the nodes of the 1147 * targets. Some nodes may be created. 1148 * 1149 * We parse a dependency line by first extracting words from the line and 1150 * finding nodes in the list of all targets with that name. This is done 1151 * until a character is encountered which is an operator character. Currently 1152 * these are only ! and :. At this point the operator is parsed and the 1153 * pointer into the line advanced until the first source is encountered. 1154 * The parsed operator is applied to each node in the 'targets' list, 1155 * which is where the nodes found for the targets are kept, by means of 1156 * the ParseDoOp function. 1157 * The sources are read in much the same way as the targets were except 1158 * that now they are expanded using the wildcarding scheme of the C-Shell 1159 * and all instances of the resulting words in the list of all targets 1160 * are found. Each of the resulting nodes is then linked to each of the 1161 * targets as one of its children. 1162 * Certain targets are handled specially. These are the ones detailed 1163 * by the specType variable. 1164 * The storing of transformation rules is also taken care of here. 1165 * A target is recognized as a transformation rule by calling 1166 * Suff_IsTransform. If it is a transformation rule, its node is gotten 1167 * from the suffix module via Suff_AddTransform rather than the standard 1168 * Targ_FindNode in the target module. 1169 *--------------------------------------------------------------------- 1170 */ 1171 static void 1172 ParseDoDependency(char *line) 1173 { 1174 char *cp; /* our current position */ 1175 GNode *gn = NULL; /* a general purpose temporary node */ 1176 int op; /* the operator on the line */ 1177 char savec; /* a place to save a character */ 1178 Lst paths; /* List of search paths to alter when parsing 1179 * a list of .PATH targets */ 1180 int tOp; /* operator from special target */ 1181 Lst sources; /* list of archive source names after 1182 * expansion */ 1183 Lst curTargs; /* list of target names to be found and added 1184 * to the targets list */ 1185 char *lstart = line; 1186 1187 if (DEBUG(PARSE)) 1188 fprintf(debug_file, "ParseDoDependency(%s)\n", line); 1189 tOp = 0; 1190 1191 specType = Not; 1192 paths = NULL; 1193 1194 curTargs = Lst_Init(FALSE); 1195 1196 /* 1197 * First, grind through the targets. 1198 */ 1199 1200 do { 1201 /* 1202 * Here LINE points to the beginning of the next word, and 1203 * LSTART points to the actual beginning of the line. 1204 */ 1205 1206 /* Find the end of the next word. */ 1207 for (cp = line; *cp && (ParseIsEscaped(lstart, cp) || 1208 !(isspace((unsigned char)*cp) || 1209 *cp == '!' || *cp == ':' || *cp == LPAREN)); 1210 cp++) { 1211 if (*cp == '$') { 1212 /* 1213 * Must be a dynamic source (would have been expanded 1214 * otherwise), so call the Var module to parse the puppy 1215 * so we can safely advance beyond it...There should be 1216 * no errors in this, as they would have been discovered 1217 * in the initial Var_Subst and we wouldn't be here. 1218 */ 1219 int length; 1220 void *freeIt; 1221 1222 (void)Var_Parse(cp, VAR_CMD, VARF_UNDEFERR|VARF_WANTRES, 1223 &length, &freeIt); 1224 free(freeIt); 1225 cp += length-1; 1226 } 1227 } 1228 1229 /* 1230 * If the word is followed by a left parenthesis, it's the 1231 * name of an object file inside an archive (ar file). 1232 */ 1233 if (!ParseIsEscaped(lstart, cp) && *cp == LPAREN) { 1234 /* 1235 * Archives must be handled specially to make sure the OP_ARCHV 1236 * flag is set in their 'type' field, for one thing, and because 1237 * things like "archive(file1.o file2.o file3.o)" are permissible. 1238 * Arch_ParseArchive will set 'line' to be the first non-blank 1239 * after the archive-spec. It creates/finds nodes for the members 1240 * and places them on the given list, returning SUCCESS if all 1241 * went well and FAILURE if there was an error in the 1242 * specification. On error, line should remain untouched. 1243 */ 1244 if (Arch_ParseArchive(&line, targets, VAR_CMD) != SUCCESS) { 1245 Parse_Error(PARSE_FATAL, 1246 "Error in archive specification: \"%s\"", line); 1247 goto out; 1248 } else { 1249 /* Done with this word; on to the next. */ 1250 continue; 1251 } 1252 } 1253 1254 if (!*cp) { 1255 /* 1256 * We got to the end of the line while we were still 1257 * looking at targets. 1258 * 1259 * Ending a dependency line without an operator is a Bozo 1260 * no-no. As a heuristic, this is also often triggered by 1261 * undetected conflicts from cvs/rcs merges. 1262 */ 1263 if ((strncmp(line, "<<<<<<", 6) == 0) || 1264 (strncmp(line, "======", 6) == 0) || 1265 (strncmp(line, ">>>>>>", 6) == 0)) 1266 Parse_Error(PARSE_FATAL, 1267 "Makefile appears to contain unresolved cvs/rcs/??? merge conflicts"); 1268 else 1269 Parse_Error(PARSE_FATAL, lstart[0] == '.' ? "Unknown directive" 1270 : "Need an operator"); 1271 goto out; 1272 } 1273 1274 /* Insert a null terminator. */ 1275 savec = *cp; 1276 *cp = '\0'; 1277 1278 /* 1279 * Got the word. See if it's a special target and if so set 1280 * specType to match it. 1281 */ 1282 if (*line == '.' && isupper ((unsigned char)line[1])) { 1283 /* 1284 * See if the target is a special target that must have it 1285 * or its sources handled specially. 1286 */ 1287 int keywd = ParseFindKeyword(line); 1288 if (keywd != -1) { 1289 if (specType == ExPath && parseKeywords[keywd].spec != ExPath) { 1290 Parse_Error(PARSE_FATAL, "Mismatched special targets"); 1291 goto out; 1292 } 1293 1294 specType = parseKeywords[keywd].spec; 1295 tOp = parseKeywords[keywd].op; 1296 1297 /* 1298 * Certain special targets have special semantics: 1299 * .PATH Have to set the dirSearchPath 1300 * variable too 1301 * .MAIN Its sources are only used if 1302 * nothing has been specified to 1303 * create. 1304 * .DEFAULT Need to create a node to hang 1305 * commands on, but we don't want 1306 * it in the graph, nor do we want 1307 * it to be the Main Target, so we 1308 * create it, set OP_NOTMAIN and 1309 * add it to the list, setting 1310 * DEFAULT to the new node for 1311 * later use. We claim the node is 1312 * A transformation rule to make 1313 * life easier later, when we'll 1314 * use Make_HandleUse to actually 1315 * apply the .DEFAULT commands. 1316 * .PHONY The list of targets 1317 * .NOPATH Don't search for file in the path 1318 * .STALE 1319 * .BEGIN 1320 * .END 1321 * .ERROR 1322 * .INTERRUPT Are not to be considered the 1323 * main target. 1324 * .NOTPARALLEL Make only one target at a time. 1325 * .SINGLESHELL Create a shell for each command. 1326 * .ORDER Must set initial predecessor to NULL 1327 */ 1328 switch (specType) { 1329 case ExPath: 1330 if (paths == NULL) { 1331 paths = Lst_Init(FALSE); 1332 } 1333 (void)Lst_AtEnd(paths, dirSearchPath); 1334 break; 1335 case Main: 1336 if (!Lst_IsEmpty(create)) { 1337 specType = Not; 1338 } 1339 break; 1340 case Begin: 1341 case End: 1342 case Stale: 1343 case dotError: 1344 case Interrupt: 1345 gn = Targ_FindNode(line, TARG_CREATE); 1346 if (doing_depend) 1347 ParseMark(gn); 1348 gn->type |= OP_NOTMAIN|OP_SPECIAL; 1349 (void)Lst_AtEnd(targets, gn); 1350 break; 1351 case Default: 1352 gn = Targ_NewGN(".DEFAULT"); 1353 gn->type |= (OP_NOTMAIN|OP_TRANSFORM); 1354 (void)Lst_AtEnd(targets, gn); 1355 DEFAULT = gn; 1356 break; 1357 case NotParallel: 1358 maxJobs = 1; 1359 break; 1360 case SingleShell: 1361 compatMake = TRUE; 1362 break; 1363 case Order: 1364 predecessor = NULL; 1365 break; 1366 default: 1367 break; 1368 } 1369 } else if (strncmp(line, ".PATH", 5) == 0) { 1370 /* 1371 * .PATH<suffix> has to be handled specially. 1372 * Call on the suffix module to give us a path to 1373 * modify. 1374 */ 1375 Lst path; 1376 1377 specType = ExPath; 1378 path = Suff_GetPath(&line[5]); 1379 if (path == NULL) { 1380 Parse_Error(PARSE_FATAL, 1381 "Suffix '%s' not defined (yet)", 1382 &line[5]); 1383 goto out; 1384 } else { 1385 if (paths == NULL) { 1386 paths = Lst_Init(FALSE); 1387 } 1388 (void)Lst_AtEnd(paths, path); 1389 } 1390 } 1391 } 1392 1393 /* 1394 * Have word in line. Get or create its node and stick it at 1395 * the end of the targets list 1396 */ 1397 if ((specType == Not) && (*line != '\0')) { 1398 if (Dir_HasWildcards(line)) { 1399 /* 1400 * Targets are to be sought only in the current directory, 1401 * so create an empty path for the thing. Note we need to 1402 * use Dir_Destroy in the destruction of the path as the 1403 * Dir module could have added a directory to the path... 1404 */ 1405 Lst emptyPath = Lst_Init(FALSE); 1406 1407 Dir_Expand(line, emptyPath, curTargs); 1408 1409 Lst_Destroy(emptyPath, Dir_Destroy); 1410 } else { 1411 /* 1412 * No wildcards, but we want to avoid code duplication, 1413 * so create a list with the word on it. 1414 */ 1415 (void)Lst_AtEnd(curTargs, line); 1416 } 1417 1418 /* Apply the targets. */ 1419 1420 while(!Lst_IsEmpty(curTargs)) { 1421 char *targName = (char *)Lst_DeQueue(curTargs); 1422 1423 if (!Suff_IsTransform (targName)) { 1424 gn = Targ_FindNode(targName, TARG_CREATE); 1425 } else { 1426 gn = Suff_AddTransform(targName); 1427 } 1428 if (doing_depend) 1429 ParseMark(gn); 1430 1431 (void)Lst_AtEnd(targets, gn); 1432 } 1433 } else if (specType == ExPath && *line != '.' && *line != '\0') { 1434 Parse_Error(PARSE_WARNING, "Extra target (%s) ignored", line); 1435 } 1436 1437 /* Don't need the inserted null terminator any more. */ 1438 *cp = savec; 1439 1440 /* 1441 * If it is a special type and not .PATH, it's the only target we 1442 * allow on this line... 1443 */ 1444 if (specType != Not && specType != ExPath) { 1445 Boolean warning = FALSE; 1446 1447 while (*cp && (ParseIsEscaped(lstart, cp) || 1448 ((*cp != '!') && (*cp != ':')))) { 1449 if (ParseIsEscaped(lstart, cp) || 1450 (*cp != ' ' && *cp != '\t')) { 1451 warning = TRUE; 1452 } 1453 cp++; 1454 } 1455 if (warning) { 1456 Parse_Error(PARSE_WARNING, "Extra target ignored"); 1457 } 1458 } else { 1459 while (*cp && isspace ((unsigned char)*cp)) { 1460 cp++; 1461 } 1462 } 1463 line = cp; 1464 } while (*line && (ParseIsEscaped(lstart, line) || 1465 ((*line != '!') && (*line != ':')))); 1466 1467 /* 1468 * Don't need the list of target names anymore... 1469 */ 1470 Lst_Destroy(curTargs, NULL); 1471 curTargs = NULL; 1472 1473 if (!Lst_IsEmpty(targets)) { 1474 switch(specType) { 1475 default: 1476 Parse_Error(PARSE_WARNING, "Special and mundane targets don't mix. Mundane ones ignored"); 1477 break; 1478 case Default: 1479 case Stale: 1480 case Begin: 1481 case End: 1482 case dotError: 1483 case Interrupt: 1484 /* 1485 * These four create nodes on which to hang commands, so 1486 * targets shouldn't be empty... 1487 */ 1488 case Not: 1489 /* 1490 * Nothing special here -- targets can be empty if it wants. 1491 */ 1492 break; 1493 } 1494 } 1495 1496 /* 1497 * Have now parsed all the target names. Must parse the operator next. The 1498 * result is left in op . 1499 */ 1500 if (*cp == '!') { 1501 op = OP_FORCE; 1502 } else if (*cp == ':') { 1503 if (cp[1] == ':') { 1504 op = OP_DOUBLEDEP; 1505 cp++; 1506 } else { 1507 op = OP_DEPENDS; 1508 } 1509 } else { 1510 Parse_Error(PARSE_FATAL, lstart[0] == '.' ? "Unknown directive" 1511 : "Missing dependency operator"); 1512 goto out; 1513 } 1514 1515 /* Advance beyond the operator */ 1516 cp++; 1517 1518 /* 1519 * Apply the operator to the target. This is how we remember which 1520 * operator a target was defined with. It fails if the operator 1521 * used isn't consistent across all references. 1522 */ 1523 Lst_ForEach(targets, ParseDoOp, &op); 1524 1525 /* 1526 * Onward to the sources. 1527 * 1528 * LINE will now point to the first source word, if any, or the 1529 * end of the string if not. 1530 */ 1531 while (*cp && isspace ((unsigned char)*cp)) { 1532 cp++; 1533 } 1534 line = cp; 1535 1536 /* 1537 * Several special targets take different actions if present with no 1538 * sources: 1539 * a .SUFFIXES line with no sources clears out all old suffixes 1540 * a .PRECIOUS line makes all targets precious 1541 * a .IGNORE line ignores errors for all targets 1542 * a .SILENT line creates silence when making all targets 1543 * a .PATH removes all directories from the search path(s). 1544 */ 1545 if (!*line) { 1546 switch (specType) { 1547 case Suffixes: 1548 Suff_ClearSuffixes(); 1549 break; 1550 case Precious: 1551 allPrecious = TRUE; 1552 break; 1553 case Ignore: 1554 ignoreErrors = TRUE; 1555 break; 1556 case Silent: 1557 beSilent = TRUE; 1558 break; 1559 case ExPath: 1560 Lst_ForEach(paths, ParseClearPath, NULL); 1561 Dir_SetPATH(); 1562 break; 1563 #ifdef POSIX 1564 case Posix: 1565 Var_Set("%POSIX", "1003.2", VAR_GLOBAL, 0); 1566 break; 1567 #endif 1568 default: 1569 break; 1570 } 1571 } else if (specType == MFlags) { 1572 /* 1573 * Call on functions in main.c to deal with these arguments and 1574 * set the initial character to a null-character so the loop to 1575 * get sources won't get anything 1576 */ 1577 Main_ParseArgLine(line); 1578 *line = '\0'; 1579 } else if (specType == ExShell) { 1580 if (Job_ParseShell(line) != SUCCESS) { 1581 Parse_Error(PARSE_FATAL, "improper shell specification"); 1582 goto out; 1583 } 1584 *line = '\0'; 1585 } else if ((specType == NotParallel) || (specType == SingleShell)) { 1586 *line = '\0'; 1587 } 1588 1589 /* 1590 * NOW GO FOR THE SOURCES 1591 */ 1592 if ((specType == Suffixes) || (specType == ExPath) || 1593 (specType == Includes) || (specType == Libs) || 1594 (specType == Null) || (specType == ExObjdir)) 1595 { 1596 while (*line) { 1597 /* 1598 * If the target was one that doesn't take files as its sources 1599 * but takes something like suffixes, we take each 1600 * space-separated word on the line as a something and deal 1601 * with it accordingly. 1602 * 1603 * If the target was .SUFFIXES, we take each source as a 1604 * suffix and add it to the list of suffixes maintained by the 1605 * Suff module. 1606 * 1607 * If the target was a .PATH, we add the source as a directory 1608 * to search on the search path. 1609 * 1610 * If it was .INCLUDES, the source is taken to be the suffix of 1611 * files which will be #included and whose search path should 1612 * be present in the .INCLUDES variable. 1613 * 1614 * If it was .LIBS, the source is taken to be the suffix of 1615 * files which are considered libraries and whose search path 1616 * should be present in the .LIBS variable. 1617 * 1618 * If it was .NULL, the source is the suffix to use when a file 1619 * has no valid suffix. 1620 * 1621 * If it was .OBJDIR, the source is a new definition for .OBJDIR, 1622 * and will cause make to do a new chdir to that path. 1623 */ 1624 while (*cp && !isspace ((unsigned char)*cp)) { 1625 cp++; 1626 } 1627 savec = *cp; 1628 *cp = '\0'; 1629 switch (specType) { 1630 case Suffixes: 1631 Suff_AddSuffix(line, &mainNode); 1632 break; 1633 case ExPath: 1634 Lst_ForEach(paths, ParseAddDir, line); 1635 break; 1636 case Includes: 1637 Suff_AddInclude(line); 1638 break; 1639 case Libs: 1640 Suff_AddLib(line); 1641 break; 1642 case Null: 1643 Suff_SetNull(line); 1644 break; 1645 case ExObjdir: 1646 Main_SetObjdir(line); 1647 break; 1648 default: 1649 break; 1650 } 1651 *cp = savec; 1652 if (savec != '\0') { 1653 cp++; 1654 } 1655 while (*cp && isspace ((unsigned char)*cp)) { 1656 cp++; 1657 } 1658 line = cp; 1659 } 1660 if (paths) { 1661 Lst_Destroy(paths, NULL); 1662 } 1663 if (specType == ExPath) 1664 Dir_SetPATH(); 1665 } else { 1666 while (*line) { 1667 /* 1668 * The targets take real sources, so we must beware of archive 1669 * specifications (i.e. things with left parentheses in them) 1670 * and handle them accordingly. 1671 */ 1672 for (; *cp && !isspace ((unsigned char)*cp); cp++) { 1673 if ((*cp == LPAREN) && (cp > line) && (cp[-1] != '$')) { 1674 /* 1675 * Only stop for a left parenthesis if it isn't at the 1676 * start of a word (that'll be for variable changes 1677 * later) and isn't preceded by a dollar sign (a dynamic 1678 * source). 1679 */ 1680 break; 1681 } 1682 } 1683 1684 if (*cp == LPAREN) { 1685 sources = Lst_Init(FALSE); 1686 if (Arch_ParseArchive(&line, sources, VAR_CMD) != SUCCESS) { 1687 Parse_Error(PARSE_FATAL, 1688 "Error in source archive spec \"%s\"", line); 1689 goto out; 1690 } 1691 1692 while (!Lst_IsEmpty (sources)) { 1693 gn = (GNode *)Lst_DeQueue(sources); 1694 ParseDoSrc(tOp, gn->name); 1695 } 1696 Lst_Destroy(sources, NULL); 1697 cp = line; 1698 } else { 1699 if (*cp) { 1700 *cp = '\0'; 1701 cp += 1; 1702 } 1703 1704 ParseDoSrc(tOp, line); 1705 } 1706 while (*cp && isspace ((unsigned char)*cp)) { 1707 cp++; 1708 } 1709 line = cp; 1710 } 1711 } 1712 1713 if (mainNode == NULL) { 1714 /* 1715 * If we have yet to decide on a main target to make, in the 1716 * absence of any user input, we want the first target on 1717 * the first dependency line that is actually a real target 1718 * (i.e. isn't a .USE or .EXEC rule) to be made. 1719 */ 1720 Lst_ForEach(targets, ParseFindMain, NULL); 1721 } 1722 1723 out: 1724 if (curTargs) 1725 Lst_Destroy(curTargs, NULL); 1726 } 1727 1728 /*- 1729 *--------------------------------------------------------------------- 1730 * Parse_IsVar -- 1731 * Return TRUE if the passed line is a variable assignment. A variable 1732 * assignment consists of a single word followed by optional whitespace 1733 * followed by either a += or an = operator. 1734 * This function is used both by the Parse_File function and main when 1735 * parsing the command-line arguments. 1736 * 1737 * Input: 1738 * line the line to check 1739 * 1740 * Results: 1741 * TRUE if it is. FALSE if it ain't 1742 * 1743 * Side Effects: 1744 * none 1745 *--------------------------------------------------------------------- 1746 */ 1747 Boolean 1748 Parse_IsVar(char *line) 1749 { 1750 Boolean wasSpace = FALSE; /* set TRUE if found a space */ 1751 char ch; 1752 int level = 0; 1753 #define ISEQOPERATOR(c) \ 1754 (((c) == '+') || ((c) == ':') || ((c) == '?') || ((c) == '!')) 1755 1756 /* 1757 * Skip to variable name 1758 */ 1759 for (;(*line == ' ') || (*line == '\t'); line++) 1760 continue; 1761 1762 /* Scan for one of the assignment operators outside a variable expansion */ 1763 while ((ch = *line++) != 0) { 1764 if (ch == '(' || ch == '{') { 1765 level++; 1766 continue; 1767 } 1768 if (ch == ')' || ch == '}') { 1769 level--; 1770 continue; 1771 } 1772 if (level != 0) 1773 continue; 1774 while (ch == ' ' || ch == '\t') { 1775 ch = *line++; 1776 wasSpace = TRUE; 1777 } 1778 #ifdef SUNSHCMD 1779 if (ch == ':' && strncmp(line, "sh", 2) == 0) { 1780 line += 2; 1781 continue; 1782 } 1783 #endif 1784 if (ch == '=') 1785 return TRUE; 1786 if (*line == '=' && ISEQOPERATOR(ch)) 1787 return TRUE; 1788 if (wasSpace) 1789 return FALSE; 1790 } 1791 1792 return FALSE; 1793 } 1794 1795 /*- 1796 *--------------------------------------------------------------------- 1797 * Parse_DoVar -- 1798 * Take the variable assignment in the passed line and do it in the 1799 * global context. 1800 * 1801 * Note: There is a lexical ambiguity with assignment modifier characters 1802 * in variable names. This routine interprets the character before the = 1803 * as a modifier. Therefore, an assignment like 1804 * C++=/usr/bin/CC 1805 * is interpreted as "C+ +=" instead of "C++ =". 1806 * 1807 * Input: 1808 * line a line guaranteed to be a variable assignment. 1809 * This reduces error checks 1810 * ctxt Context in which to do the assignment 1811 * 1812 * Results: 1813 * none 1814 * 1815 * Side Effects: 1816 * the variable structure of the given variable name is altered in the 1817 * global context. 1818 *--------------------------------------------------------------------- 1819 */ 1820 void 1821 Parse_DoVar(char *line, GNode *ctxt) 1822 { 1823 char *cp; /* pointer into line */ 1824 enum { 1825 VAR_SUBST, VAR_APPEND, VAR_SHELL, VAR_NORMAL 1826 } type; /* Type of assignment */ 1827 char *opc; /* ptr to operator character to 1828 * null-terminate the variable name */ 1829 Boolean freeCp = FALSE; /* TRUE if cp needs to be freed, 1830 * i.e. if any variable expansion was 1831 * performed */ 1832 int depth; 1833 1834 /* 1835 * Skip to variable name 1836 */ 1837 while ((*line == ' ') || (*line == '\t')) { 1838 line++; 1839 } 1840 1841 /* 1842 * Skip to operator character, nulling out whitespace as we go 1843 * XXX Rather than counting () and {} we should look for $ and 1844 * then expand the variable. 1845 */ 1846 for (depth = 0, cp = line + 1; depth != 0 || *cp != '='; cp++) { 1847 if (*cp == '(' || *cp == '{') { 1848 depth++; 1849 continue; 1850 } 1851 if (*cp == ')' || *cp == '}') { 1852 depth--; 1853 continue; 1854 } 1855 if (depth == 0 && isspace ((unsigned char)*cp)) { 1856 *cp = '\0'; 1857 } 1858 } 1859 opc = cp-1; /* operator is the previous character */ 1860 *cp++ = '\0'; /* nuke the = */ 1861 1862 /* 1863 * Check operator type 1864 */ 1865 switch (*opc) { 1866 case '+': 1867 type = VAR_APPEND; 1868 *opc = '\0'; 1869 break; 1870 1871 case '?': 1872 /* 1873 * If the variable already has a value, we don't do anything. 1874 */ 1875 *opc = '\0'; 1876 if (Var_Exists(line, ctxt)) { 1877 return; 1878 } else { 1879 type = VAR_NORMAL; 1880 } 1881 break; 1882 1883 case ':': 1884 type = VAR_SUBST; 1885 *opc = '\0'; 1886 break; 1887 1888 case '!': 1889 type = VAR_SHELL; 1890 *opc = '\0'; 1891 break; 1892 1893 default: 1894 #ifdef SUNSHCMD 1895 while (opc > line && *opc != ':') 1896 opc--; 1897 1898 if (strncmp(opc, ":sh", 3) == 0) { 1899 type = VAR_SHELL; 1900 *opc = '\0'; 1901 break; 1902 } 1903 #endif 1904 type = VAR_NORMAL; 1905 break; 1906 } 1907 1908 while (isspace ((unsigned char)*cp)) { 1909 cp++; 1910 } 1911 1912 if (type == VAR_APPEND) { 1913 Var_Append(line, cp, ctxt); 1914 } else if (type == VAR_SUBST) { 1915 /* 1916 * Allow variables in the old value to be undefined, but leave their 1917 * invocation alone -- this is done by forcing oldVars to be false. 1918 * XXX: This can cause recursive variables, but that's not hard to do, 1919 * and this allows someone to do something like 1920 * 1921 * CFLAGS = $(.INCLUDES) 1922 * CFLAGS := -I.. $(CFLAGS) 1923 * 1924 * And not get an error. 1925 */ 1926 Boolean oldOldVars = oldVars; 1927 1928 oldVars = FALSE; 1929 1930 /* 1931 * make sure that we set the variable the first time to nothing 1932 * so that it gets substituted! 1933 */ 1934 if (!Var_Exists(line, ctxt)) 1935 Var_Set(line, "", ctxt, 0); 1936 1937 cp = Var_Subst(NULL, cp, ctxt, VARF_WANTRES|VARF_ASSIGN); 1938 oldVars = oldOldVars; 1939 freeCp = TRUE; 1940 1941 Var_Set(line, cp, ctxt, 0); 1942 } else if (type == VAR_SHELL) { 1943 char *res; 1944 const char *error; 1945 1946 if (strchr(cp, '$') != NULL) { 1947 /* 1948 * There's a dollar sign in the command, so perform variable 1949 * expansion on the whole thing. The resulting string will need 1950 * freeing when we're done, so set freeCmd to TRUE. 1951 */ 1952 cp = Var_Subst(NULL, cp, VAR_CMD, VARF_UNDEFERR|VARF_WANTRES); 1953 freeCp = TRUE; 1954 } 1955 1956 res = Cmd_Exec(cp, &error); 1957 Var_Set(line, res, ctxt, 0); 1958 free(res); 1959 1960 if (error) 1961 Parse_Error(PARSE_WARNING, error, cp); 1962 } else { 1963 /* 1964 * Normal assignment -- just do it. 1965 */ 1966 Var_Set(line, cp, ctxt, 0); 1967 } 1968 if (strcmp(line, MAKEOVERRIDES) == 0) 1969 Main_ExportMAKEFLAGS(FALSE); /* re-export MAKEFLAGS */ 1970 else if (strcmp(line, ".CURDIR") == 0) { 1971 /* 1972 * Somone is being (too?) clever... 1973 * Let's pretend they know what they are doing and 1974 * re-initialize the 'cur' Path. 1975 */ 1976 Dir_InitCur(cp); 1977 Dir_SetPATH(); 1978 } else if (strcmp(line, MAKE_JOB_PREFIX) == 0) { 1979 Job_SetPrefix(); 1980 } else if (strcmp(line, MAKE_EXPORTED) == 0) { 1981 Var_Export(cp, 0); 1982 } 1983 if (freeCp) 1984 free(cp); 1985 } 1986 1987 1988 /* 1989 * ParseMaybeSubMake -- 1990 * Scan the command string to see if it a possible submake node 1991 * Input: 1992 * cmd the command to scan 1993 * Results: 1994 * TRUE if the command is possibly a submake, FALSE if not. 1995 */ 1996 static Boolean 1997 ParseMaybeSubMake(const char *cmd) 1998 { 1999 size_t i; 2000 static struct { 2001 const char *name; 2002 size_t len; 2003 } vals[] = { 2004 #define MKV(A) { A, sizeof(A) - 1 } 2005 MKV("${MAKE}"), 2006 MKV("${.MAKE}"), 2007 MKV("$(MAKE)"), 2008 MKV("$(.MAKE)"), 2009 MKV("make"), 2010 }; 2011 for (i = 0; i < sizeof(vals)/sizeof(vals[0]); i++) { 2012 char *ptr; 2013 if ((ptr = strstr(cmd, vals[i].name)) == NULL) 2014 continue; 2015 if ((ptr == cmd || !isalnum((unsigned char)ptr[-1])) 2016 && !isalnum((unsigned char)ptr[vals[i].len])) 2017 return TRUE; 2018 } 2019 return FALSE; 2020 } 2021 2022 /*- 2023 * ParseAddCmd -- 2024 * Lst_ForEach function to add a command line to all targets 2025 * 2026 * Input: 2027 * gnp the node to which the command is to be added 2028 * cmd the command to add 2029 * 2030 * Results: 2031 * Always 0 2032 * 2033 * Side Effects: 2034 * A new element is added to the commands list of the node, 2035 * and the node can be marked as a submake node if the command is 2036 * determined to be that. 2037 */ 2038 static int 2039 ParseAddCmd(void *gnp, void *cmd) 2040 { 2041 GNode *gn = (GNode *)gnp; 2042 2043 /* Add to last (ie current) cohort for :: targets */ 2044 if ((gn->type & OP_DOUBLEDEP) && !Lst_IsEmpty (gn->cohorts)) 2045 gn = (GNode *)Lst_Datum(Lst_Last(gn->cohorts)); 2046 2047 /* if target already supplied, ignore commands */ 2048 if (!(gn->type & OP_HAS_COMMANDS)) { 2049 (void)Lst_AtEnd(gn->commands, cmd); 2050 if (ParseMaybeSubMake(cmd)) 2051 gn->type |= OP_SUBMAKE; 2052 ParseMark(gn); 2053 } else { 2054 #ifdef notyet 2055 /* XXX: We cannot do this until we fix the tree */ 2056 (void)Lst_AtEnd(gn->commands, cmd); 2057 Parse_Error(PARSE_WARNING, 2058 "overriding commands for target \"%s\"; " 2059 "previous commands defined at %s: %d ignored", 2060 gn->name, gn->fname, gn->lineno); 2061 #else 2062 Parse_Error(PARSE_WARNING, 2063 "duplicate script for target \"%s\" ignored", 2064 gn->name); 2065 ParseErrorInternal(gn->fname, gn->lineno, PARSE_WARNING, 2066 "using previous script for \"%s\" defined here", 2067 gn->name); 2068 #endif 2069 } 2070 return(0); 2071 } 2072 2073 /*- 2074 *----------------------------------------------------------------------- 2075 * ParseHasCommands -- 2076 * Callback procedure for Parse_File when destroying the list of 2077 * targets on the last dependency line. Marks a target as already 2078 * having commands if it does, to keep from having shell commands 2079 * on multiple dependency lines. 2080 * 2081 * Input: 2082 * gnp Node to examine 2083 * 2084 * Results: 2085 * None 2086 * 2087 * Side Effects: 2088 * OP_HAS_COMMANDS may be set for the target. 2089 * 2090 *----------------------------------------------------------------------- 2091 */ 2092 static void 2093 ParseHasCommands(void *gnp) 2094 { 2095 GNode *gn = (GNode *)gnp; 2096 if (!Lst_IsEmpty(gn->commands)) { 2097 gn->type |= OP_HAS_COMMANDS; 2098 } 2099 } 2100 2101 /*- 2102 *----------------------------------------------------------------------- 2103 * Parse_AddIncludeDir -- 2104 * Add a directory to the path searched for included makefiles 2105 * bracketed by double-quotes. Used by functions in main.c 2106 * 2107 * Input: 2108 * dir The name of the directory to add 2109 * 2110 * Results: 2111 * None. 2112 * 2113 * Side Effects: 2114 * The directory is appended to the list. 2115 * 2116 *----------------------------------------------------------------------- 2117 */ 2118 void 2119 Parse_AddIncludeDir(char *dir) 2120 { 2121 (void)Dir_AddDir(parseIncPath, dir); 2122 } 2123 2124 /*- 2125 *--------------------------------------------------------------------- 2126 * ParseDoInclude -- 2127 * Push to another file. 2128 * 2129 * The input is the line minus the `.'. A file spec is a string 2130 * enclosed in <> or "". The former is looked for only in sysIncPath. 2131 * The latter in . and the directories specified by -I command line 2132 * options 2133 * 2134 * Results: 2135 * None 2136 * 2137 * Side Effects: 2138 * A structure is added to the includes Lst and readProc, lineno, 2139 * fname and curFILE are altered for the new file 2140 *--------------------------------------------------------------------- 2141 */ 2142 2143 static void 2144 Parse_include_file(char *file, Boolean isSystem, Boolean depinc, int silent) 2145 { 2146 struct loadedfile *lf; 2147 char *fullname; /* full pathname of file */ 2148 char *newName; 2149 char *prefEnd, *incdir; 2150 int fd; 2151 int i; 2152 2153 /* 2154 * Now we know the file's name and its search path, we attempt to 2155 * find the durn thing. A return of NULL indicates the file don't 2156 * exist. 2157 */ 2158 fullname = file[0] == '/' ? bmake_strdup(file) : NULL; 2159 2160 if (fullname == NULL && !isSystem) { 2161 /* 2162 * Include files contained in double-quotes are first searched for 2163 * relative to the including file's location. We don't want to 2164 * cd there, of course, so we just tack on the old file's 2165 * leading path components and call Dir_FindFile to see if 2166 * we can locate the beast. 2167 */ 2168 2169 incdir = bmake_strdup(curFile->fname); 2170 prefEnd = strrchr(incdir, '/'); 2171 if (prefEnd != NULL) { 2172 *prefEnd = '\0'; 2173 /* Now do lexical processing of leading "../" on the filename */ 2174 for (i = 0; strncmp(file + i, "../", 3) == 0; i += 3) { 2175 prefEnd = strrchr(incdir + 1, '/'); 2176 if (prefEnd == NULL || strcmp(prefEnd, "/..") == 0) 2177 break; 2178 *prefEnd = '\0'; 2179 } 2180 newName = str_concat(incdir, file + i, STR_ADDSLASH); 2181 fullname = Dir_FindFile(newName, parseIncPath); 2182 if (fullname == NULL) 2183 fullname = Dir_FindFile(newName, dirSearchPath); 2184 free(newName); 2185 } 2186 free(incdir); 2187 2188 if (fullname == NULL) { 2189 /* 2190 * Makefile wasn't found in same directory as included makefile. 2191 * Search for it first on the -I search path, 2192 * then on the .PATH search path, if not found in a -I directory. 2193 * If we have a suffix specific path we should use that. 2194 */ 2195 char *suff; 2196 Lst suffPath = NULL; 2197 2198 if ((suff = strrchr(file, '.'))) { 2199 suffPath = Suff_GetPath(suff); 2200 if (suffPath != NULL) { 2201 fullname = Dir_FindFile(file, suffPath); 2202 } 2203 } 2204 if (fullname == NULL) { 2205 fullname = Dir_FindFile(file, parseIncPath); 2206 if (fullname == NULL) { 2207 fullname = Dir_FindFile(file, dirSearchPath); 2208 } 2209 } 2210 } 2211 } 2212 2213 /* Looking for a system file or file still not found */ 2214 if (fullname == NULL) { 2215 /* 2216 * Look for it on the system path 2217 */ 2218 fullname = Dir_FindFile(file, 2219 Lst_IsEmpty(sysIncPath) ? defIncPath : sysIncPath); 2220 } 2221 2222 if (fullname == NULL) { 2223 if (!silent) 2224 Parse_Error(PARSE_FATAL, "Could not find %s", file); 2225 return; 2226 } 2227 2228 /* Actually open the file... */ 2229 fd = open(fullname, O_RDONLY); 2230 if (fd == -1) { 2231 if (!silent) 2232 Parse_Error(PARSE_FATAL, "Cannot open %s", fullname); 2233 free(fullname); 2234 return; 2235 } 2236 2237 /* load it */ 2238 lf = loadfile(fullname, fd); 2239 2240 ParseSetIncludedFile(); 2241 /* Start reading from this file next */ 2242 Parse_SetInput(fullname, 0, -1, loadedfile_nextbuf, lf); 2243 curFile->lf = lf; 2244 curFile->depending = doing_depend; /* restore this on EOF */ 2245 if (depinc) 2246 doing_depend = depinc; /* only turn it on */ 2247 } 2248 2249 static void 2250 ParseDoInclude(char *line) 2251 { 2252 char endc; /* the character which ends the file spec */ 2253 char *cp; /* current position in file spec */ 2254 int silent = (*line != 'i') ? 1 : 0; 2255 char *file = &line[7 + silent]; 2256 2257 /* Skip to delimiter character so we know where to look */ 2258 while (*file == ' ' || *file == '\t') 2259 file++; 2260 2261 if (*file != '"' && *file != '<') { 2262 Parse_Error(PARSE_FATAL, 2263 ".include filename must be delimited by '\"' or '<'"); 2264 return; 2265 } 2266 2267 /* 2268 * Set the search path on which to find the include file based on the 2269 * characters which bracket its name. Angle-brackets imply it's 2270 * a system Makefile while double-quotes imply it's a user makefile 2271 */ 2272 if (*file == '<') { 2273 endc = '>'; 2274 } else { 2275 endc = '"'; 2276 } 2277 2278 /* Skip to matching delimiter */ 2279 for (cp = ++file; *cp && *cp != endc; cp++) 2280 continue; 2281 2282 if (*cp != endc) { 2283 Parse_Error(PARSE_FATAL, 2284 "Unclosed %cinclude filename. '%c' expected", 2285 '.', endc); 2286 return; 2287 } 2288 *cp = '\0'; 2289 2290 /* 2291 * Substitute for any variables in the file name before trying to 2292 * find the thing. 2293 */ 2294 file = Var_Subst(NULL, file, VAR_CMD, VARF_WANTRES); 2295 2296 Parse_include_file(file, endc == '>', (*line == 'd'), silent); 2297 free(file); 2298 } 2299 2300 2301 /*- 2302 *--------------------------------------------------------------------- 2303 * ParseSetIncludedFile -- 2304 * Set the .INCLUDEDFROMFILE variable to the contents of .PARSEFILE 2305 * and the .INCLUDEDFROMDIR variable to the contents of .PARSEDIR 2306 * 2307 * Results: 2308 * None 2309 * 2310 * Side Effects: 2311 * The .INCLUDEDFROMFILE variable is overwritten by the contents 2312 * of .PARSEFILE and the .INCLUDEDFROMDIR variable is overwriten 2313 * by the contents of .PARSEDIR 2314 *--------------------------------------------------------------------- 2315 */ 2316 static void 2317 ParseSetIncludedFile(void) 2318 { 2319 char *pf, *fp = NULL; 2320 char *pd, *dp = NULL; 2321 2322 pf = Var_Value(".PARSEFILE", VAR_GLOBAL, &fp); 2323 Var_Set(".INCLUDEDFROMFILE", pf, VAR_GLOBAL, 0); 2324 pd = Var_Value(".PARSEDIR", VAR_GLOBAL, &dp); 2325 Var_Set(".INCLUDEDFROMDIR", pd, VAR_GLOBAL, 0); 2326 2327 if (DEBUG(PARSE)) 2328 fprintf(debug_file, "%s: ${.INCLUDEDFROMDIR} = `%s' " 2329 "${.INCLUDEDFROMFILE} = `%s'\n", __func__, pd, pf); 2330 2331 free(fp); 2332 free(dp); 2333 } 2334 /*- 2335 *--------------------------------------------------------------------- 2336 * ParseSetParseFile -- 2337 * Set the .PARSEDIR and .PARSEFILE variables to the dirname and 2338 * basename of the given filename 2339 * 2340 * Results: 2341 * None 2342 * 2343 * Side Effects: 2344 * The .PARSEDIR and .PARSEFILE variables are overwritten by the 2345 * dirname and basename of the given filename. 2346 *--------------------------------------------------------------------- 2347 */ 2348 static void 2349 ParseSetParseFile(const char *filename) 2350 { 2351 char *slash, *dirname; 2352 const char *pd, *pf; 2353 int len; 2354 2355 slash = strrchr(filename, '/'); 2356 if (slash == NULL) { 2357 Var_Set(".PARSEDIR", pd = curdir, VAR_GLOBAL, 0); 2358 Var_Set(".PARSEFILE", pf = filename, VAR_GLOBAL, 0); 2359 dirname= NULL; 2360 } else { 2361 len = slash - filename; 2362 dirname = bmake_malloc(len + 1); 2363 memcpy(dirname, filename, len); 2364 dirname[len] = '\0'; 2365 Var_Set(".PARSEDIR", pd = dirname, VAR_GLOBAL, 0); 2366 Var_Set(".PARSEFILE", pf = slash + 1, VAR_GLOBAL, 0); 2367 } 2368 if (DEBUG(PARSE)) 2369 fprintf(debug_file, "%s: ${.PARSEDIR} = `%s' ${.PARSEFILE} = `%s'\n", 2370 __func__, pd, pf); 2371 free(dirname); 2372 } 2373 2374 /* 2375 * Track the makefiles we read - so makefiles can 2376 * set dependencies on them. 2377 * Avoid adding anything more than once. 2378 */ 2379 2380 static void 2381 ParseTrackInput(const char *name) 2382 { 2383 char *old; 2384 char *ep; 2385 char *fp = NULL; 2386 size_t name_len = strlen(name); 2387 2388 old = Var_Value(MAKE_MAKEFILES, VAR_GLOBAL, &fp); 2389 if (old) { 2390 ep = old + strlen(old) - name_len; 2391 /* does it contain name? */ 2392 for (; old != NULL; old = strchr(old, ' ')) { 2393 if (*old == ' ') 2394 old++; 2395 if (old >= ep) 2396 break; /* cannot contain name */ 2397 if (memcmp(old, name, name_len) == 0 2398 && (old[name_len] == 0 || old[name_len] == ' ')) 2399 goto cleanup; 2400 } 2401 } 2402 Var_Append (MAKE_MAKEFILES, name, VAR_GLOBAL); 2403 cleanup: 2404 if (fp) { 2405 free(fp); 2406 } 2407 } 2408 2409 2410 /*- 2411 *--------------------------------------------------------------------- 2412 * Parse_setInput -- 2413 * Start Parsing from the given source 2414 * 2415 * Results: 2416 * None 2417 * 2418 * Side Effects: 2419 * A structure is added to the includes Lst and readProc, lineno, 2420 * fname and curFile are altered for the new file 2421 *--------------------------------------------------------------------- 2422 */ 2423 void 2424 Parse_SetInput(const char *name, int line, int fd, 2425 char *(*nextbuf)(void *, size_t *), void *arg) 2426 { 2427 char *buf; 2428 size_t len; 2429 2430 if (name == NULL) 2431 name = curFile->fname; 2432 else 2433 ParseTrackInput(name); 2434 2435 if (DEBUG(PARSE)) 2436 fprintf(debug_file, "%s: file %s, line %d, fd %d, nextbuf %p, arg %p\n", 2437 __func__, name, line, fd, nextbuf, arg); 2438 2439 if (fd == -1 && nextbuf == NULL) 2440 /* sanity */ 2441 return; 2442 2443 if (curFile != NULL) 2444 /* Save exiting file info */ 2445 Lst_AtFront(includes, curFile); 2446 2447 /* Allocate and fill in new structure */ 2448 curFile = bmake_malloc(sizeof *curFile); 2449 2450 /* 2451 * Once the previous state has been saved, we can get down to reading 2452 * the new file. We set up the name of the file to be the absolute 2453 * name of the include file so error messages refer to the right 2454 * place. 2455 */ 2456 curFile->fname = bmake_strdup(name); 2457 curFile->lineno = line; 2458 curFile->first_lineno = line; 2459 curFile->nextbuf = nextbuf; 2460 curFile->nextbuf_arg = arg; 2461 curFile->lf = NULL; 2462 2463 assert(nextbuf != NULL); 2464 2465 /* Get first block of input data */ 2466 buf = curFile->nextbuf(curFile->nextbuf_arg, &len); 2467 if (buf == NULL) { 2468 /* Was all a waste of time ... */ 2469 if (curFile->fname) 2470 free(curFile->fname); 2471 free(curFile); 2472 return; 2473 } 2474 curFile->P_str = buf; 2475 curFile->P_ptr = buf; 2476 curFile->P_end = buf+len; 2477 2478 curFile->cond_depth = Cond_save_depth(); 2479 ParseSetParseFile(name); 2480 } 2481 2482 #ifdef SYSVINCLUDE 2483 /*- 2484 *--------------------------------------------------------------------- 2485 * ParseTraditionalInclude -- 2486 * Push to another file. 2487 * 2488 * The input is the current line. The file name(s) are 2489 * following the "include". 2490 * 2491 * Results: 2492 * None 2493 * 2494 * Side Effects: 2495 * A structure is added to the includes Lst and readProc, lineno, 2496 * fname and curFILE are altered for the new file 2497 *--------------------------------------------------------------------- 2498 */ 2499 static void 2500 ParseTraditionalInclude(char *line) 2501 { 2502 char *cp; /* current position in file spec */ 2503 int done = 0; 2504 int silent = (line[0] != 'i') ? 1 : 0; 2505 char *file = &line[silent + 7]; 2506 char *all_files; 2507 2508 if (DEBUG(PARSE)) { 2509 fprintf(debug_file, "%s: %s\n", __func__, file); 2510 } 2511 2512 /* 2513 * Skip over whitespace 2514 */ 2515 while (isspace((unsigned char)*file)) 2516 file++; 2517 2518 /* 2519 * Substitute for any variables in the file name before trying to 2520 * find the thing. 2521 */ 2522 all_files = Var_Subst(NULL, file, VAR_CMD, VARF_WANTRES); 2523 2524 if (*file == '\0') { 2525 Parse_Error(PARSE_FATAL, 2526 "Filename missing from \"include\""); 2527 return; 2528 } 2529 2530 for (file = all_files; !done; file = cp + 1) { 2531 /* Skip to end of line or next whitespace */ 2532 for (cp = file; *cp && !isspace((unsigned char) *cp); cp++) 2533 continue; 2534 2535 if (*cp) 2536 *cp = '\0'; 2537 else 2538 done = 1; 2539 2540 Parse_include_file(file, FALSE, FALSE, silent); 2541 } 2542 free(all_files); 2543 } 2544 #endif 2545 2546 #ifdef GMAKEEXPORT 2547 /*- 2548 *--------------------------------------------------------------------- 2549 * ParseGmakeExport -- 2550 * Parse export <variable>=<value> 2551 * 2552 * And set the environment with it. 2553 * 2554 * Results: 2555 * None 2556 * 2557 * Side Effects: 2558 * None 2559 *--------------------------------------------------------------------- 2560 */ 2561 static void 2562 ParseGmakeExport(char *line) 2563 { 2564 char *variable = &line[6]; 2565 char *value; 2566 2567 if (DEBUG(PARSE)) { 2568 fprintf(debug_file, "%s: %s\n", __func__, variable); 2569 } 2570 2571 /* 2572 * Skip over whitespace 2573 */ 2574 while (isspace((unsigned char)*variable)) 2575 variable++; 2576 2577 for (value = variable; *value && *value != '='; value++) 2578 continue; 2579 2580 if (*value != '=') { 2581 Parse_Error(PARSE_FATAL, 2582 "Variable/Value missing from \"export\""); 2583 return; 2584 } 2585 *value++ = '\0'; /* terminate variable */ 2586 2587 /* 2588 * Expand the value before putting it in the environment. 2589 */ 2590 value = Var_Subst(NULL, value, VAR_CMD, VARF_WANTRES); 2591 setenv(variable, value, 1); 2592 } 2593 #endif 2594 2595 /*- 2596 *--------------------------------------------------------------------- 2597 * ParseEOF -- 2598 * Called when EOF is reached in the current file. If we were reading 2599 * an include file, the includes stack is popped and things set up 2600 * to go back to reading the previous file at the previous location. 2601 * 2602 * Results: 2603 * CONTINUE if there's more to do. DONE if not. 2604 * 2605 * Side Effects: 2606 * The old curFILE, is closed. The includes list is shortened. 2607 * lineno, curFILE, and fname are changed if CONTINUE is returned. 2608 *--------------------------------------------------------------------- 2609 */ 2610 static int 2611 ParseEOF(void) 2612 { 2613 char *ptr; 2614 size_t len; 2615 2616 assert(curFile->nextbuf != NULL); 2617 2618 doing_depend = curFile->depending; /* restore this */ 2619 /* get next input buffer, if any */ 2620 ptr = curFile->nextbuf(curFile->nextbuf_arg, &len); 2621 curFile->P_ptr = ptr; 2622 curFile->P_str = ptr; 2623 curFile->P_end = ptr + len; 2624 curFile->lineno = curFile->first_lineno; 2625 if (ptr != NULL) { 2626 /* Iterate again */ 2627 return CONTINUE; 2628 } 2629 2630 /* Ensure the makefile (or loop) didn't have mismatched conditionals */ 2631 Cond_restore_depth(curFile->cond_depth); 2632 2633 if (curFile->lf != NULL) { 2634 loadedfile_destroy(curFile->lf); 2635 curFile->lf = NULL; 2636 } 2637 2638 /* Dispose of curFile info */ 2639 /* Leak curFile->fname because all the gnodes have pointers to it */ 2640 free(curFile->P_str); 2641 free(curFile); 2642 2643 curFile = Lst_DeQueue(includes); 2644 2645 if (curFile == NULL) { 2646 /* We've run out of input */ 2647 Var_Delete(".PARSEDIR", VAR_GLOBAL); 2648 Var_Delete(".PARSEFILE", VAR_GLOBAL); 2649 Var_Delete(".INCLUDEDFROMDIR", VAR_GLOBAL); 2650 Var_Delete(".INCLUDEDFROMFILE", VAR_GLOBAL); 2651 return DONE; 2652 } 2653 2654 if (DEBUG(PARSE)) 2655 fprintf(debug_file, "ParseEOF: returning to file %s, line %d\n", 2656 curFile->fname, curFile->lineno); 2657 2658 /* Restore the PARSEDIR/PARSEFILE variables */ 2659 ParseSetParseFile(curFile->fname); 2660 return (CONTINUE); 2661 } 2662 2663 #define PARSE_RAW 1 2664 #define PARSE_SKIP 2 2665 2666 static char * 2667 ParseGetLine(int flags, int *length) 2668 { 2669 IFile *cf = curFile; 2670 char *ptr; 2671 char ch; 2672 char *line; 2673 char *line_end; 2674 char *escaped; 2675 char *comment; 2676 char *tp; 2677 2678 /* Loop through blank lines and comment lines */ 2679 for (;;) { 2680 cf->lineno++; 2681 line = cf->P_ptr; 2682 ptr = line; 2683 line_end = line; 2684 escaped = NULL; 2685 comment = NULL; 2686 for (;;) { 2687 if (cf->P_end != NULL && ptr == cf->P_end) { 2688 /* end of buffer */ 2689 ch = 0; 2690 break; 2691 } 2692 ch = *ptr; 2693 if (ch == 0 || (ch == '\\' && ptr[1] == 0)) { 2694 if (cf->P_end == NULL) 2695 /* End of string (aka for loop) data */ 2696 break; 2697 /* see if there is more we can parse */ 2698 while (ptr++ < cf->P_end) { 2699 if ((ch = *ptr) == '\n') { 2700 if (ptr > line && ptr[-1] == '\\') 2701 continue; 2702 Parse_Error(PARSE_WARNING, 2703 "Zero byte read from file, skipping rest of line."); 2704 break; 2705 } 2706 } 2707 if (cf->nextbuf != NULL) { 2708 /* 2709 * End of this buffer; return EOF and outer logic 2710 * will get the next one. (eww) 2711 */ 2712 break; 2713 } 2714 Parse_Error(PARSE_FATAL, "Zero byte read from file"); 2715 return NULL; 2716 } 2717 2718 if (ch == '\\') { 2719 /* Don't treat next character as special, remember first one */ 2720 if (escaped == NULL) 2721 escaped = ptr; 2722 if (ptr[1] == '\n') 2723 cf->lineno++; 2724 ptr += 2; 2725 line_end = ptr; 2726 continue; 2727 } 2728 if (ch == '#' && comment == NULL) { 2729 /* Remember first '#' for comment stripping */ 2730 /* Unless previous char was '[', as in modifier :[#] */ 2731 if (!(ptr > line && ptr[-1] == '[')) 2732 comment = line_end; 2733 } 2734 ptr++; 2735 if (ch == '\n') 2736 break; 2737 if (!isspace((unsigned char)ch)) 2738 /* We are not interested in trailing whitespace */ 2739 line_end = ptr; 2740 } 2741 2742 /* Save next 'to be processed' location */ 2743 cf->P_ptr = ptr; 2744 2745 /* Check we have a non-comment, non-blank line */ 2746 if (line_end == line || comment == line) { 2747 if (ch == 0) 2748 /* At end of file */ 2749 return NULL; 2750 /* Parse another line */ 2751 continue; 2752 } 2753 2754 /* We now have a line of data */ 2755 *line_end = 0; 2756 2757 if (flags & PARSE_RAW) { 2758 /* Leave '\' (etc) in line buffer (eg 'for' lines) */ 2759 *length = line_end - line; 2760 return line; 2761 } 2762 2763 if (flags & PARSE_SKIP) { 2764 /* Completely ignore non-directives */ 2765 if (line[0] != '.') 2766 continue; 2767 /* We could do more of the .else/.elif/.endif checks here */ 2768 } 2769 break; 2770 } 2771 2772 /* Brutally ignore anything after a non-escaped '#' in non-commands */ 2773 if (comment != NULL && line[0] != '\t') { 2774 line_end = comment; 2775 *line_end = 0; 2776 } 2777 2778 /* If we didn't see a '\\' then the in-situ data is fine */ 2779 if (escaped == NULL) { 2780 *length = line_end - line; 2781 return line; 2782 } 2783 2784 /* Remove escapes from '\n' and '#' */ 2785 tp = ptr = escaped; 2786 escaped = line; 2787 for (; ; *tp++ = ch) { 2788 ch = *ptr++; 2789 if (ch != '\\') { 2790 if (ch == 0) 2791 break; 2792 continue; 2793 } 2794 2795 ch = *ptr++; 2796 if (ch == 0) { 2797 /* Delete '\\' at end of buffer */ 2798 tp--; 2799 break; 2800 } 2801 2802 if (ch == '#' && line[0] != '\t') 2803 /* Delete '\\' from before '#' on non-command lines */ 2804 continue; 2805 2806 if (ch != '\n') { 2807 /* Leave '\\' in buffer for later */ 2808 *tp++ = '\\'; 2809 /* Make sure we don't delete an escaped ' ' from the line end */ 2810 escaped = tp + 1; 2811 continue; 2812 } 2813 2814 /* Escaped '\n' replace following whitespace with a single ' ' */ 2815 while (ptr[0] == ' ' || ptr[0] == '\t') 2816 ptr++; 2817 ch = ' '; 2818 } 2819 2820 /* Delete any trailing spaces - eg from empty continuations */ 2821 while (tp > escaped && isspace((unsigned char)tp[-1])) 2822 tp--; 2823 2824 *tp = 0; 2825 *length = tp - line; 2826 return line; 2827 } 2828 2829 /*- 2830 *--------------------------------------------------------------------- 2831 * ParseReadLine -- 2832 * Read an entire line from the input file. Called only by Parse_File. 2833 * 2834 * Results: 2835 * A line w/o its newline 2836 * 2837 * Side Effects: 2838 * Only those associated with reading a character 2839 *--------------------------------------------------------------------- 2840 */ 2841 static char * 2842 ParseReadLine(void) 2843 { 2844 char *line; /* Result */ 2845 int lineLength; /* Length of result */ 2846 int lineno; /* Saved line # */ 2847 int rval; 2848 2849 for (;;) { 2850 line = ParseGetLine(0, &lineLength); 2851 if (line == NULL) 2852 return NULL; 2853 2854 if (line[0] != '.') 2855 return line; 2856 2857 /* 2858 * The line might be a conditional. Ask the conditional module 2859 * about it and act accordingly 2860 */ 2861 switch (Cond_Eval(line)) { 2862 case COND_SKIP: 2863 /* Skip to next conditional that evaluates to COND_PARSE. */ 2864 do { 2865 line = ParseGetLine(PARSE_SKIP, &lineLength); 2866 } while (line && Cond_Eval(line) != COND_PARSE); 2867 if (line == NULL) 2868 break; 2869 continue; 2870 case COND_PARSE: 2871 continue; 2872 case COND_INVALID: /* Not a conditional line */ 2873 /* Check for .for loops */ 2874 rval = For_Eval(line); 2875 if (rval == 0) 2876 /* Not a .for line */ 2877 break; 2878 if (rval < 0) 2879 /* Syntax error - error printed, ignore line */ 2880 continue; 2881 /* Start of a .for loop */ 2882 lineno = curFile->lineno; 2883 /* Accumulate loop lines until matching .endfor */ 2884 do { 2885 line = ParseGetLine(PARSE_RAW, &lineLength); 2886 if (line == NULL) { 2887 Parse_Error(PARSE_FATAL, 2888 "Unexpected end of file in for loop."); 2889 break; 2890 } 2891 } while (For_Accum(line)); 2892 /* Stash each iteration as a new 'input file' */ 2893 For_Run(lineno); 2894 /* Read next line from for-loop buffer */ 2895 continue; 2896 } 2897 return (line); 2898 } 2899 } 2900 2901 /*- 2902 *----------------------------------------------------------------------- 2903 * ParseFinishLine -- 2904 * Handle the end of a dependency group. 2905 * 2906 * Results: 2907 * Nothing. 2908 * 2909 * Side Effects: 2910 * inLine set FALSE. 'targets' list destroyed. 2911 * 2912 *----------------------------------------------------------------------- 2913 */ 2914 static void 2915 ParseFinishLine(void) 2916 { 2917 if (inLine) { 2918 Lst_ForEach(targets, Suff_EndTransform, NULL); 2919 Lst_Destroy(targets, ParseHasCommands); 2920 targets = NULL; 2921 inLine = FALSE; 2922 } 2923 } 2924 2925 2926 /*- 2927 *--------------------------------------------------------------------- 2928 * Parse_File -- 2929 * Parse a file into its component parts, incorporating it into the 2930 * current dependency graph. This is the main function and controls 2931 * almost every other function in this module 2932 * 2933 * Input: 2934 * name the name of the file being read 2935 * fd Open file to makefile to parse 2936 * 2937 * Results: 2938 * None 2939 * 2940 * Side Effects: 2941 * closes fd. 2942 * Loads. Nodes are added to the list of all targets, nodes and links 2943 * are added to the dependency graph. etc. etc. etc. 2944 *--------------------------------------------------------------------- 2945 */ 2946 void 2947 Parse_File(const char *name, int fd) 2948 { 2949 char *cp; /* pointer into the line */ 2950 char *line; /* the line we're working on */ 2951 struct loadedfile *lf; 2952 2953 lf = loadfile(name, fd); 2954 2955 inLine = FALSE; 2956 fatals = 0; 2957 2958 if (name == NULL) { 2959 name = "(stdin)"; 2960 } 2961 2962 Parse_SetInput(name, 0, -1, loadedfile_nextbuf, lf); 2963 curFile->lf = lf; 2964 2965 do { 2966 for (; (line = ParseReadLine()) != NULL; ) { 2967 if (DEBUG(PARSE)) 2968 fprintf(debug_file, "ParseReadLine (%d): '%s'\n", 2969 curFile->lineno, line); 2970 if (*line == '.') { 2971 /* 2972 * Lines that begin with the special character may be 2973 * include or undef directives. 2974 * On the other hand they can be suffix rules (.c.o: ...) 2975 * or just dependencies for filenames that start '.'. 2976 */ 2977 for (cp = line + 1; isspace((unsigned char)*cp); cp++) { 2978 continue; 2979 } 2980 if (strncmp(cp, "include", 7) == 0 || 2981 ((cp[0] == 'd' || cp[0] == 's' || cp[0] == '-') && 2982 strncmp(&cp[1], "include", 7) == 0)) { 2983 ParseDoInclude(cp); 2984 continue; 2985 } 2986 if (strncmp(cp, "undef", 5) == 0) { 2987 char *cp2; 2988 for (cp += 5; isspace((unsigned char) *cp); cp++) 2989 continue; 2990 for (cp2 = cp; !isspace((unsigned char) *cp2) && 2991 (*cp2 != '\0'); cp2++) 2992 continue; 2993 *cp2 = '\0'; 2994 Var_Delete(cp, VAR_GLOBAL); 2995 continue; 2996 } else if (strncmp(cp, "export", 6) == 0) { 2997 for (cp += 6; isspace((unsigned char) *cp); cp++) 2998 continue; 2999 Var_Export(cp, 1); 3000 continue; 3001 } else if (strncmp(cp, "unexport", 8) == 0) { 3002 Var_UnExport(cp); 3003 continue; 3004 } else if (strncmp(cp, "info", 4) == 0 || 3005 strncmp(cp, "error", 5) == 0 || 3006 strncmp(cp, "warning", 7) == 0) { 3007 if (ParseMessage(cp)) 3008 continue; 3009 } 3010 } 3011 3012 if (*line == '\t') { 3013 /* 3014 * If a line starts with a tab, it can only hope to be 3015 * a creation command. 3016 */ 3017 cp = line + 1; 3018 shellCommand: 3019 for (; isspace ((unsigned char)*cp); cp++) { 3020 continue; 3021 } 3022 if (*cp) { 3023 if (!inLine) 3024 Parse_Error(PARSE_FATAL, 3025 "Unassociated shell command \"%s\"", 3026 cp); 3027 /* 3028 * So long as it's not a blank line and we're actually 3029 * in a dependency spec, add the command to the list of 3030 * commands of all targets in the dependency spec 3031 */ 3032 if (targets) { 3033 cp = bmake_strdup(cp); 3034 Lst_ForEach(targets, ParseAddCmd, cp); 3035 #ifdef CLEANUP 3036 Lst_AtEnd(targCmds, cp); 3037 #endif 3038 } 3039 } 3040 continue; 3041 } 3042 3043 #ifdef SYSVINCLUDE 3044 if (((strncmp(line, "include", 7) == 0 && 3045 isspace((unsigned char) line[7])) || 3046 ((line[0] == 's' || line[0] == '-') && 3047 strncmp(&line[1], "include", 7) == 0 && 3048 isspace((unsigned char) line[8]))) && 3049 strchr(line, ':') == NULL) { 3050 /* 3051 * It's an S3/S5-style "include". 3052 */ 3053 ParseTraditionalInclude(line); 3054 continue; 3055 } 3056 #endif 3057 #ifdef GMAKEEXPORT 3058 if (strncmp(line, "export", 6) == 0 && 3059 isspace((unsigned char) line[6]) && 3060 strchr(line, ':') == NULL) { 3061 /* 3062 * It's a Gmake "export". 3063 */ 3064 ParseGmakeExport(line); 3065 continue; 3066 } 3067 #endif 3068 if (Parse_IsVar(line)) { 3069 ParseFinishLine(); 3070 Parse_DoVar(line, VAR_GLOBAL); 3071 continue; 3072 } 3073 3074 #ifndef POSIX 3075 /* 3076 * To make life easier on novices, if the line is indented we 3077 * first make sure the line has a dependency operator in it. 3078 * If it doesn't have an operator and we're in a dependency 3079 * line's script, we assume it's actually a shell command 3080 * and add it to the current list of targets. 3081 */ 3082 cp = line; 3083 if (isspace((unsigned char) line[0])) { 3084 while ((*cp != '\0') && isspace((unsigned char) *cp)) 3085 cp++; 3086 while (*cp && (ParseIsEscaped(line, cp) || 3087 (*cp != ':') && (*cp != '!'))) { 3088 cp++; 3089 } 3090 if (*cp == '\0') { 3091 if (inLine) { 3092 Parse_Error(PARSE_WARNING, 3093 "Shell command needs a leading tab"); 3094 goto shellCommand; 3095 } 3096 } 3097 } 3098 #endif 3099 ParseFinishLine(); 3100 3101 /* 3102 * For some reason - probably to make the parser impossible - 3103 * a ';' can be used to separate commands from dependencies. 3104 * Attempt to avoid ';' inside substitution patterns. 3105 */ 3106 { 3107 int level = 0; 3108 3109 for (cp = line; *cp != 0; cp++) { 3110 if (*cp == '\\' && cp[1] != 0) { 3111 cp++; 3112 continue; 3113 } 3114 if (*cp == '$' && 3115 (cp[1] == '(' || cp[1] == '{')) { 3116 level++; 3117 continue; 3118 } 3119 if (level > 0) { 3120 if (*cp == ')' || *cp == '}') { 3121 level--; 3122 continue; 3123 } 3124 } else if (*cp == ';') { 3125 break; 3126 } 3127 } 3128 } 3129 if (*cp != 0) 3130 /* Terminate the dependency list at the ';' */ 3131 *cp++ = 0; 3132 else 3133 cp = NULL; 3134 3135 /* 3136 * We now know it's a dependency line so it needs to have all 3137 * variables expanded before being parsed. Tell the variable 3138 * module to complain if some variable is undefined... 3139 */ 3140 line = Var_Subst(NULL, line, VAR_CMD, VARF_UNDEFERR|VARF_WANTRES); 3141 3142 /* 3143 * Need a non-circular list for the target nodes 3144 */ 3145 if (targets) 3146 Lst_Destroy(targets, NULL); 3147 3148 targets = Lst_Init(FALSE); 3149 inLine = TRUE; 3150 3151 ParseDoDependency(line); 3152 free(line); 3153 3154 /* If there were commands after a ';', add them now */ 3155 if (cp != NULL) { 3156 goto shellCommand; 3157 } 3158 } 3159 /* 3160 * Reached EOF, but it may be just EOF of an include file... 3161 */ 3162 } while (ParseEOF() == CONTINUE); 3163 3164 if (fatals) { 3165 (void)fflush(stdout); 3166 (void)fprintf(stderr, 3167 "%s: Fatal errors encountered -- cannot continue", 3168 progname); 3169 PrintOnError(NULL, NULL); 3170 exit(1); 3171 } 3172 } 3173 3174 /*- 3175 *--------------------------------------------------------------------- 3176 * Parse_Init -- 3177 * initialize the parsing module 3178 * 3179 * Results: 3180 * none 3181 * 3182 * Side Effects: 3183 * the parseIncPath list is initialized... 3184 *--------------------------------------------------------------------- 3185 */ 3186 void 3187 Parse_Init(void) 3188 { 3189 mainNode = NULL; 3190 parseIncPath = Lst_Init(FALSE); 3191 sysIncPath = Lst_Init(FALSE); 3192 defIncPath = Lst_Init(FALSE); 3193 includes = Lst_Init(FALSE); 3194 #ifdef CLEANUP 3195 targCmds = Lst_Init(FALSE); 3196 #endif 3197 } 3198 3199 void 3200 Parse_End(void) 3201 { 3202 #ifdef CLEANUP 3203 Lst_Destroy(targCmds, (FreeProc *)free); 3204 if (targets) 3205 Lst_Destroy(targets, NULL); 3206 Lst_Destroy(defIncPath, Dir_Destroy); 3207 Lst_Destroy(sysIncPath, Dir_Destroy); 3208 Lst_Destroy(parseIncPath, Dir_Destroy); 3209 Lst_Destroy(includes, NULL); /* Should be empty now */ 3210 #endif 3211 } 3212 3213 3214 /*- 3215 *----------------------------------------------------------------------- 3216 * Parse_MainName -- 3217 * Return a Lst of the main target to create for main()'s sake. If 3218 * no such target exists, we Punt with an obnoxious error message. 3219 * 3220 * Results: 3221 * A Lst of the single node to create. 3222 * 3223 * Side Effects: 3224 * None. 3225 * 3226 *----------------------------------------------------------------------- 3227 */ 3228 Lst 3229 Parse_MainName(void) 3230 { 3231 Lst mainList; /* result list */ 3232 3233 mainList = Lst_Init(FALSE); 3234 3235 if (mainNode == NULL) { 3236 Punt("no target to make."); 3237 /*NOTREACHED*/ 3238 } else if (mainNode->type & OP_DOUBLEDEP) { 3239 (void)Lst_AtEnd(mainList, mainNode); 3240 Lst_Concat(mainList, mainNode->cohorts, LST_CONCNEW); 3241 } 3242 else 3243 (void)Lst_AtEnd(mainList, mainNode); 3244 Var_Append(".TARGETS", mainNode->name, VAR_GLOBAL); 3245 return (mainList); 3246 } 3247 3248 /*- 3249 *----------------------------------------------------------------------- 3250 * ParseMark -- 3251 * Add the filename and lineno to the GNode so that we remember 3252 * where it was first defined. 3253 * 3254 * Side Effects: 3255 * None. 3256 * 3257 *----------------------------------------------------------------------- 3258 */ 3259 static void 3260 ParseMark(GNode *gn) 3261 { 3262 gn->fname = curFile->fname; 3263 gn->lineno = curFile->lineno; 3264 } 3265
Indexes created Sun Sep 21 18:09:52 GMT 2025