Makefile revision 1.384
1 1.384 rillig # $NetBSD: Makefile,v 1.384 2026/08/23 08:23:56 rillig Exp $ 2 1.1 sjg # 3 1.1 sjg # Unit tests for make(1) 4 1.60 rillig # 5 1.1 sjg # The main targets are: 6 1.1 sjg # 7 1.60 rillig # all: 8 1.60 rillig # run all the tests 9 1.60 rillig # test: 10 1.60 rillig # run 'all', and compare to expected results 11 1.60 rillig # accept: 12 1.60 rillig # move generated output to expected results 13 1.60 rillig # 14 1.61 rillig # Settable variables 15 1.61 rillig # 16 1.61 rillig # TEST_MAKE 17 1.61 rillig # The make program to be tested. 18 1.61 rillig # 19 1.60 rillig # 20 1.60 rillig # Adding a test case 21 1.60 rillig # 22 1.11 sjg # Each feature should get its own set of tests in its own suitably 23 1.42 apb # named makefile (*.mk), with its own set of expected results (*.exp), 24 1.61 rillig # and it should be added to the TESTS list. 25 1.60 rillig # 26 1.60 rillig # Any added files must also be added to src/distrib/sets/lists/tests/mi. 27 1.354 rillig # To do that, run "make sync-mi" in this directory. 28 1.78 rillig # 29 1.1 sjg 30 1.269 sjg .MAIN: all 31 1.269 sjg 32 1.254 sjg # we use these below but we might be an older make 33 1.254 sjg .MAKE.OS?= ${uname -s:L:sh} 34 1.247 sjg .MAKE.UID?= ${id -u:L:sh} 35 1.247 sjg 36 1.333 sjg # for many tests we need a TMPDIR that will not collide 37 1.333 sjg # with other users. 38 1.333 sjg .if ${.OBJDIR} != ${.CURDIR} 39 1.333 sjg # easy 40 1.333 sjg TMPDIR:= ${.OBJDIR}/tmp 41 1.333 sjg .elif defined(TMPDIR) 42 1.333 sjg TMPDIR:= ${TMPDIR}/uid${.MAKE.UID} 43 1.333 sjg .else 44 1.333 sjg TMPDIR:= /tmp/uid${.MAKE.UID} 45 1.333 sjg .endif 46 1.333 sjg # make sure it exists 47 1.333 sjg .if !exist(${TMPDIR}) 48 1.333 sjg _!= mkdir -p ${TMPDIR} 49 1.333 sjg .endif 50 1.355 sjg # and clean it up - outside the context of 51 1.355 sjg # any target that might be using it. 52 1.355 sjg .END: rm-tmpdir 53 1.355 sjg rm-tmpdir: .NOMETA 54 1.355 sjg @rm -rf ${TMPDIR} 55 1.333 sjg 56 1.61 rillig # Each test is in a sub-makefile. 57 1.61 rillig # Keep the list sorted. 58 1.92 rillig # Any test that is commented out must be ignored in 59 1.92 rillig # src/tests/usr.bin/make/t_make.sh as well. 60 1.133 rillig TESTS+= archive 61 1.126 rillig TESTS+= archive-suffix 62 1.369 rillig TESTS+= char-005c-reverse-solidus 63 1.384 rillig TESTS+= char-000a-new-line 64 1.183 rillig TESTS+= cmd-errors 65 1.257 rillig TESTS+= cmd-errors-jobs 66 1.185 rillig TESTS+= cmd-errors-lint 67 1.124 rillig TESTS+= cmd-interrupt 68 1.75 rillig TESTS+= cmdline 69 1.265 rillig TESTS+= cmdline-redirect-stdin 70 1.188 rillig TESTS+= cmdline-undefined 71 1.61 rillig TESTS+= comment 72 1.249 rillig TESTS+= compat-error 73 1.93 rillig TESTS+= cond-cmp-numeric 74 1.117 rillig TESTS+= cond-cmp-numeric-eq 75 1.117 rillig TESTS+= cond-cmp-numeric-ge 76 1.117 rillig TESTS+= cond-cmp-numeric-gt 77 1.117 rillig TESTS+= cond-cmp-numeric-le 78 1.117 rillig TESTS+= cond-cmp-numeric-lt 79 1.117 rillig TESTS+= cond-cmp-numeric-ne 80 1.93 rillig TESTS+= cond-cmp-string 81 1.141 rillig TESTS+= cond-cmp-unary 82 1.250 rillig TESTS+= cond-eof 83 1.103 rillig TESTS+= cond-func 84 1.93 rillig TESTS+= cond-func-commands 85 1.93 rillig TESTS+= cond-func-defined 86 1.93 rillig TESTS+= cond-func-empty 87 1.93 rillig TESTS+= cond-func-exists 88 1.93 rillig TESTS+= cond-func-make 89 1.217 rillig TESTS+= cond-func-make-main 90 1.93 rillig TESTS+= cond-func-target 91 1.61 rillig TESTS+= cond-late 92 1.93 rillig TESTS+= cond-op 93 1.93 rillig TESTS+= cond-op-and 94 1.192 rillig TESTS+= cond-op-and-lint 95 1.93 rillig TESTS+= cond-op-not 96 1.93 rillig TESTS+= cond-op-or 97 1.192 rillig TESTS+= cond-op-or-lint 98 1.93 rillig TESTS+= cond-op-parentheses 99 1.61 rillig TESTS+= cond-short 100 1.93 rillig TESTS+= cond-token-number 101 1.93 rillig TESTS+= cond-token-plain 102 1.93 rillig TESTS+= cond-token-string 103 1.93 rillig TESTS+= cond-token-var 104 1.142 rillig TESTS+= cond-undef-lint 105 1.81 rillig TESTS+= counter 106 1.147 rillig TESTS+= counter-append 107 1.93 rillig TESTS+= dep 108 1.93 rillig TESTS+= dep-colon 109 1.152 rillig TESTS+= dep-colon-bug-cross-file 110 1.93 rillig TESTS+= dep-double-colon 111 1.172 rillig TESTS+= dep-double-colon-indep 112 1.296 rillig TESTS+= dep-duplicate 113 1.93 rillig TESTS+= dep-exclam 114 1.107 rillig TESTS+= dep-none 115 1.290 rillig TESTS+= dep-op-missing 116 1.174 rillig TESTS+= dep-percent 117 1.109 rillig TESTS+= dep-var 118 1.93 rillig TESTS+= dep-wildcards 119 1.93 rillig TESTS+= depsrc 120 1.173 rillig TESTS+= depsrc-end 121 1.93 rillig TESTS+= depsrc-exec 122 1.93 rillig TESTS+= depsrc-ignore 123 1.93 rillig TESTS+= depsrc-made 124 1.93 rillig TESTS+= depsrc-make 125 1.93 rillig TESTS+= depsrc-meta 126 1.93 rillig TESTS+= depsrc-nometa 127 1.93 rillig TESTS+= depsrc-nometa_cmp 128 1.93 rillig TESTS+= depsrc-nopath 129 1.93 rillig TESTS+= depsrc-notmain 130 1.93 rillig TESTS+= depsrc-optional 131 1.93 rillig TESTS+= depsrc-phony 132 1.93 rillig TESTS+= depsrc-precious 133 1.93 rillig TESTS+= depsrc-recursive 134 1.93 rillig TESTS+= depsrc-silent 135 1.93 rillig TESTS+= depsrc-use 136 1.93 rillig TESTS+= depsrc-usebefore 137 1.105 rillig TESTS+= depsrc-usebefore-double-colon 138 1.93 rillig TESTS+= depsrc-wait 139 1.93 rillig TESTS+= deptgt 140 1.93 rillig TESTS+= deptgt-begin 141 1.224 rillig TESTS+= deptgt-begin-fail 142 1.224 rillig TESTS+= deptgt-begin-fail-indirect 143 1.93 rillig TESTS+= deptgt-default 144 1.93 rillig TESTS+= deptgt-delete_on_error 145 1.93 rillig TESTS+= deptgt-end 146 1.222 rillig TESTS+= deptgt-end-fail 147 1.237 rillig TESTS+= deptgt-end-fail-all 148 1.223 rillig TESTS+= deptgt-end-fail-indirect 149 1.146 rillig TESTS+= deptgt-end-jobs 150 1.93 rillig TESTS+= deptgt-error 151 1.93 rillig TESTS+= deptgt-ignore 152 1.93 rillig TESTS+= deptgt-interrupt 153 1.93 rillig TESTS+= deptgt-main 154 1.93 rillig TESTS+= deptgt-makeflags 155 1.93 rillig TESTS+= deptgt-no_parallel 156 1.93 rillig TESTS+= deptgt-nopath 157 1.93 rillig TESTS+= deptgt-notparallel 158 1.93 rillig TESTS+= deptgt-objdir 159 1.93 rillig TESTS+= deptgt-order 160 1.93 rillig TESTS+= deptgt-path 161 1.93 rillig TESTS+= deptgt-path-suffix 162 1.93 rillig TESTS+= deptgt-phony 163 1.312 rillig TESTS+= deptgt-posix 164 1.93 rillig TESTS+= deptgt-precious 165 1.93 rillig TESTS+= deptgt-shell 166 1.93 rillig TESTS+= deptgt-silent 167 1.308 rillig TESTS+= deptgt-silent-jobs 168 1.93 rillig TESTS+= deptgt-stale 169 1.93 rillig TESTS+= deptgt-suffixes 170 1.77 rillig TESTS+= dir 171 1.114 rillig TESTS+= dir-expand-path 172 1.93 rillig TESTS+= directive 173 1.140 rillig TESTS+= directive-dinclude 174 1.93 rillig TESTS+= directive-elif 175 1.93 rillig TESTS+= directive-elifdef 176 1.93 rillig TESTS+= directive-elifmake 177 1.93 rillig TESTS+= directive-elifndef 178 1.93 rillig TESTS+= directive-elifnmake 179 1.93 rillig TESTS+= directive-else 180 1.259 rillig TESTS+= directive-endfor 181 1.93 rillig TESTS+= directive-endif 182 1.93 rillig TESTS+= directive-error 183 1.93 rillig TESTS+= directive-export 184 1.93 rillig TESTS+= directive-export-env 185 1.258 rillig TESTS+= directive-export-impl 186 1.156 rillig TESTS+= directive-export-gmake 187 1.93 rillig TESTS+= directive-export-literal 188 1.130 rillig TESTS+= directive-for 189 1.323 sjg TESTS+= directive-for-break 190 1.316 rillig TESTS+= directive-for-empty 191 1.260 rillig TESTS+= directive-for-errors 192 1.260 rillig TESTS+= directive-for-escape 193 1.127 rillig TESTS+= directive-for-generating-endif 194 1.283 rillig TESTS+= directive-for-if 195 1.251 rillig TESTS+= directive-for-lines 196 1.252 rillig TESTS+= directive-for-null 197 1.140 rillig TESTS+= directive-hyphen-include 198 1.93 rillig TESTS+= directive-if 199 1.197 rillig TESTS+= directive-if-nested 200 1.93 rillig TESTS+= directive-ifdef 201 1.93 rillig TESTS+= directive-ifmake 202 1.93 rillig TESTS+= directive-ifndef 203 1.93 rillig TESTS+= directive-ifnmake 204 1.140 rillig TESTS+= directive-include 205 1.140 rillig TESTS+= directive-include-fatal 206 1.338 rillig TESTS+= directive-include-guard 207 1.93 rillig TESTS+= directive-info 208 1.246 rillig TESTS+= directive-misspellings 209 1.140 rillig TESTS+= directive-sinclude 210 1.93 rillig TESTS+= directive-undef 211 1.93 rillig TESTS+= directive-unexport 212 1.93 rillig TESTS+= directive-unexport-env 213 1.93 rillig TESTS+= directive-warning 214 1.61 rillig TESTS+= dollar 215 1.61 rillig TESTS+= doterror 216 1.61 rillig TESTS+= dotwait 217 1.61 rillig TESTS+= error 218 1.63 sjg TESTS+= # escape # broken by reverting POSIX changes 219 1.61 rillig TESTS+= export 220 1.61 rillig TESTS+= export-all 221 1.61 rillig TESTS+= export-env 222 1.89 rillig TESTS+= export-variants 223 1.190 rillig TESTS+= gnode-submake 224 1.162 rillig TESTS+= hanoi-include 225 1.86 rillig TESTS+= impsrc 226 1.61 rillig TESTS+= include-main 227 1.189 rillig TESTS+= job-flags 228 1.363 rillig TESTS+= job-output 229 1.154 rillig TESTS+= job-output-long-lines 230 1.276 rillig TESTS+= job-output-null 231 1.263 rillig TESTS+= jobs-empty-commands 232 1.279 rillig TESTS+= jobs-empty-commands-error 233 1.232 rillig TESTS+= jobs-error-indirect 234 1.232 rillig TESTS+= jobs-error-nested 235 1.232 rillig TESTS+= jobs-error-nested-make 236 1.83 rillig TESTS+= lint 237 1.90 rillig TESTS+= make-exported 238 1.230 sjg TESTS+= meta-cmd-cmp 239 1.370 sjg TESTS+= meta-output 240 1.61 rillig TESTS+= moderrs 241 1.61 rillig TESTS+= modmisc 242 1.247 sjg .if ${.MAKE.UID} > 0 243 1.198 sjg TESTS+= objdir-writable 244 1.225 sjg .endif 245 1.93 rillig TESTS+= opt 246 1.93 rillig TESTS+= opt-backwards 247 1.93 rillig TESTS+= opt-chdir 248 1.93 rillig TESTS+= opt-debug 249 1.134 rillig TESTS+= opt-debug-all 250 1.134 rillig TESTS+= opt-debug-archive 251 1.134 rillig TESTS+= opt-debug-curdir 252 1.134 rillig TESTS+= opt-debug-cond 253 1.134 rillig TESTS+= opt-debug-dir 254 1.134 rillig TESTS+= opt-debug-errors 255 1.277 rillig TESTS+= opt-debug-errors-jobs 256 1.134 rillig TESTS+= opt-debug-file 257 1.134 rillig TESTS+= opt-debug-for 258 1.134 rillig TESTS+= opt-debug-graph1 259 1.134 rillig TESTS+= opt-debug-graph2 260 1.134 rillig TESTS+= opt-debug-graph3 261 1.134 rillig TESTS+= opt-debug-hash 262 1.134 rillig TESTS+= opt-debug-jobs 263 1.134 rillig TESTS+= opt-debug-lint 264 1.134 rillig TESTS+= opt-debug-loud 265 1.134 rillig TESTS+= opt-debug-meta 266 1.134 rillig TESTS+= opt-debug-making 267 1.134 rillig TESTS+= opt-debug-no-rm 268 1.134 rillig TESTS+= opt-debug-parse 269 1.134 rillig TESTS+= opt-debug-suff 270 1.134 rillig TESTS+= opt-debug-targets 271 1.134 rillig TESTS+= opt-debug-varraw 272 1.134 rillig TESTS+= opt-debug-var 273 1.134 rillig TESTS+= opt-debug-x-trace 274 1.93 rillig TESTS+= opt-define 275 1.93 rillig TESTS+= opt-env 276 1.93 rillig TESTS+= opt-file 277 1.93 rillig TESTS+= opt-ignore 278 1.93 rillig TESTS+= opt-include-dir 279 1.93 rillig TESTS+= opt-jobs 280 1.93 rillig TESTS+= opt-jobs-internal 281 1.241 rillig TESTS+= opt-jobs-no-action 282 1.93 rillig TESTS+= opt-keep-going 283 1.309 rillig TESTS+= opt-keep-going-indirect 284 1.238 rillig TESTS+= opt-keep-going-multiple 285 1.93 rillig TESTS+= opt-m-include-dir 286 1.93 rillig TESTS+= opt-no-action 287 1.93 rillig TESTS+= opt-no-action-at-all 288 1.242 rillig TESTS+= opt-no-action-runflags 289 1.264 rillig TESTS+= opt-no-action-touch 290 1.93 rillig TESTS+= opt-query 291 1.93 rillig TESTS+= opt-raw 292 1.93 rillig TESTS+= opt-silent 293 1.93 rillig TESTS+= opt-touch 294 1.199 rillig TESTS+= opt-touch-jobs 295 1.93 rillig TESTS+= opt-tracefile 296 1.93 rillig TESTS+= opt-var-expanded 297 1.93 rillig TESTS+= opt-var-literal 298 1.291 rillig TESTS+= opt-version 299 1.93 rillig TESTS+= opt-warnings-as-errors 300 1.93 rillig TESTS+= opt-where-am-i 301 1.93 rillig TESTS+= opt-x-reduce-exported 302 1.61 rillig TESTS+= order 303 1.289 rillig TESTS+= parse 304 1.162 rillig TESTS+= parse-var 305 1.88 rillig TESTS+= phony-end 306 1.61 rillig TESTS+= posix 307 1.358 rillig TESTS+= posix-execution 308 1.358 rillig TESTS+= posix-expansion 309 1.358 rillig TESTS+= posix-varassign 310 1.63 sjg TESTS+= # posix1 # broken by reverting POSIX changes 311 1.84 rillig TESTS+= recursive 312 1.93 rillig TESTS+= sh 313 1.106 rillig TESTS+= sh-dots 314 1.245 rillig TESTS+= sh-errctl 315 1.244 rillig TESTS+= sh-flags 316 1.93 rillig TESTS+= sh-jobs 317 1.93 rillig TESTS+= sh-jobs-error 318 1.93 rillig TESTS+= sh-leading-at 319 1.93 rillig TESTS+= sh-leading-hyphen 320 1.93 rillig TESTS+= sh-leading-plus 321 1.93 rillig TESTS+= sh-meta-chars 322 1.93 rillig TESTS+= sh-multi-line 323 1.93 rillig TESTS+= sh-single-line 324 1.162 rillig TESTS+= shell-csh 325 1.162 rillig TESTS+= shell-custom 326 1.162 rillig TESTS+= shell-ksh 327 1.162 rillig TESTS+= shell-sh 328 1.354 rillig TESTS+= suff 329 1.169 rillig TESTS+= suff-add-later 330 1.169 rillig TESTS+= suff-clear-regular 331 1.169 rillig TESTS+= suff-clear-single 332 1.212 rillig TESTS+= suff-incomplete 333 1.175 rillig TESTS+= suff-lookup 334 1.167 rillig TESTS+= suff-main 335 1.218 rillig TESTS+= suff-main-several 336 1.220 rillig TESTS+= suff-phony 337 1.150 rillig TESTS+= suff-rebuild 338 1.203 rillig TESTS+= suff-self 339 1.219 rillig TESTS+= suff-transform-debug 340 1.169 rillig TESTS+= suff-transform-endless 341 1.169 rillig TESTS+= suff-transform-expand 342 1.169 rillig TESTS+= suff-transform-select 343 1.303 rillig TESTS+= suff-use 344 1.61 rillig TESTS+= sunshcmd 345 1.61 rillig TESTS+= ternary 346 1.61 rillig TESTS+= unexport 347 1.61 rillig TESTS+= unexport-env 348 1.91 rillig TESTS+= use-inference 349 1.330 sjg TESTS+= var-readonly 350 1.299 rillig TESTS+= var-scope 351 1.299 rillig TESTS+= var-scope-cmdline 352 1.299 rillig TESTS+= var-scope-env 353 1.299 rillig TESTS+= var-scope-global 354 1.299 rillig TESTS+= var-scope-local 355 1.299 rillig TESTS+= var-scope-local-legacy 356 1.273 rillig TESTS+= var-eval-short 357 1.93 rillig TESTS+= var-op 358 1.93 rillig TESTS+= var-op-append 359 1.93 rillig TESTS+= var-op-assign 360 1.93 rillig TESTS+= var-op-default 361 1.93 rillig TESTS+= var-op-expand 362 1.93 rillig TESTS+= var-op-shell 363 1.162 rillig TESTS+= var-op-sunsh 364 1.179 rillig TESTS+= var-recursive 365 1.61 rillig TESTS+= varcmd 366 1.64 rillig TESTS+= vardebug 367 1.64 rillig TESTS+= varfind 368 1.61 rillig TESTS+= varmisc 369 1.93 rillig TESTS+= varmod 370 1.93 rillig TESTS+= varmod-assign 371 1.292 rillig TESTS+= varmod-assign-shell 372 1.93 rillig TESTS+= varmod-defined 373 1.61 rillig TESTS+= varmod-edge 374 1.93 rillig TESTS+= varmod-exclam-shell 375 1.93 rillig TESTS+= varmod-extension 376 1.93 rillig TESTS+= varmod-gmtime 377 1.93 rillig TESTS+= varmod-hash 378 1.93 rillig TESTS+= varmod-head 379 1.93 rillig TESTS+= varmod-ifelse 380 1.234 rillig TESTS+= varmod-indirect 381 1.93 rillig TESTS+= varmod-l-name-to-value 382 1.93 rillig TESTS+= varmod-localtime 383 1.93 rillig TESTS+= varmod-loop 384 1.286 rillig TESTS+= varmod-loop-delete 385 1.275 rillig TESTS+= varmod-loop-varname 386 1.93 rillig TESTS+= varmod-match 387 1.99 rillig TESTS+= varmod-match-escape 388 1.334 sjg TESTS+= varmod-mtime 389 1.93 rillig TESTS+= varmod-no-match 390 1.93 rillig TESTS+= varmod-order 391 1.281 sjg TESTS+= varmod-order-numeric 392 1.93 rillig TESTS+= varmod-order-reverse 393 1.93 rillig TESTS+= varmod-order-shuffle 394 1.282 rillig TESTS+= varmod-order-string 395 1.93 rillig TESTS+= varmod-path 396 1.93 rillig TESTS+= varmod-quote 397 1.93 rillig TESTS+= varmod-quote-dollar 398 1.93 rillig TESTS+= varmod-range 399 1.93 rillig TESTS+= varmod-remember 400 1.93 rillig TESTS+= varmod-root 401 1.93 rillig TESTS+= varmod-select-words 402 1.93 rillig TESTS+= varmod-shell 403 1.93 rillig TESTS+= varmod-subst 404 1.93 rillig TESTS+= varmod-subst-regex 405 1.271 rillig TESTS+= varmod-sun-shell 406 1.373 sjg TESTS+= varmod-sun-shell1 407 1.93 rillig TESTS+= varmod-sysv 408 1.93 rillig TESTS+= varmod-tail 409 1.93 rillig TESTS+= varmod-to-abs 410 1.93 rillig TESTS+= varmod-to-lower 411 1.93 rillig TESTS+= varmod-to-many-words 412 1.93 rillig TESTS+= varmod-to-one-word 413 1.93 rillig TESTS+= varmod-to-separator 414 1.348 sjg TESTS+= varmod-to-title 415 1.93 rillig TESTS+= varmod-to-upper 416 1.93 rillig TESTS+= varmod-undefined 417 1.93 rillig TESTS+= varmod-unique 418 1.93 rillig TESTS+= varname 419 1.368 rillig TESTS+= varname-circumflex 420 1.93 rillig TESTS+= varname-dollar 421 1.93 rillig TESTS+= varname-dot-alltargets 422 1.93 rillig TESTS+= varname-dot-curdir 423 1.122 rillig TESTS+= varname-dot-includes 424 1.93 rillig TESTS+= varname-dot-includedfromdir 425 1.93 rillig TESTS+= varname-dot-includedfromfile 426 1.122 rillig TESTS+= varname-dot-libs 427 1.93 rillig TESTS+= varname-dot-make-dependfile 428 1.93 rillig TESTS+= varname-dot-make-expand_variables 429 1.93 rillig TESTS+= varname-dot-make-exported 430 1.93 rillig TESTS+= varname-dot-make-jobs 431 1.93 rillig TESTS+= varname-dot-make-jobs-prefix 432 1.93 rillig TESTS+= varname-dot-make-level 433 1.93 rillig TESTS+= varname-dot-make-makefile_preference 434 1.93 rillig TESTS+= varname-dot-make-makefiles 435 1.93 rillig TESTS+= varname-dot-make-meta-bailiwick 436 1.93 rillig TESTS+= varname-dot-make-meta-created 437 1.93 rillig TESTS+= varname-dot-make-meta-files 438 1.333 sjg .if ${.MAKE.PATH_FILEMON:Uno:Nktrace:N/dev*} == "" && ${TMPDIR:N/tmp*:N/var/tmp*} != "" 439 1.333 sjg # these tests will not work if TMPDIR is or is a subdir of 440 1.333 sjg # /tmp or /var/tmp 441 1.93 rillig TESTS+= varname-dot-make-meta-ignore_filter 442 1.93 rillig TESTS+= varname-dot-make-meta-ignore_paths 443 1.93 rillig TESTS+= varname-dot-make-meta-ignore_patterns 444 1.332 sjg TESTS+= varname-dot-make-path_filemon 445 1.332 sjg .endif 446 1.93 rillig TESTS+= varname-dot-make-meta-prefix 447 1.93 rillig TESTS+= varname-dot-make-mode 448 1.93 rillig TESTS+= varname-dot-make-pid 449 1.93 rillig TESTS+= varname-dot-make-ppid 450 1.93 rillig TESTS+= varname-dot-make-save_dollars 451 1.233 rillig TESTS+= varname-dot-makeflags 452 1.93 rillig TESTS+= varname-dot-makeoverrides 453 1.93 rillig TESTS+= varname-dot-newline 454 1.93 rillig TESTS+= varname-dot-objdir 455 1.93 rillig TESTS+= varname-dot-parsedir 456 1.93 rillig TESTS+= varname-dot-parsefile 457 1.93 rillig TESTS+= varname-dot-path 458 1.115 rillig TESTS+= varname-dot-shell 459 1.288 rillig TESTS+= varname-dot-suffixes 460 1.93 rillig TESTS+= varname-dot-targets 461 1.110 rillig TESTS+= varname-empty 462 1.93 rillig TESTS+= varname-make 463 1.366 rillig TESTS+= varname-make_stack_trace 464 1.93 rillig TESTS+= varname-make_print_var_on_error 465 1.170 rillig TESTS+= varname-make_print_var_on_error-jobs 466 1.132 rillig TESTS+= varname-makefile 467 1.93 rillig TESTS+= varname-makeflags 468 1.93 rillig TESTS+= varname-pwd 469 1.93 rillig TESTS+= varname-vpath 470 1.66 rillig TESTS+= varparse-dynamic 471 1.191 rillig TESTS+= varparse-errors 472 1.156 rillig TESTS+= varparse-mod 473 1.149 rillig TESTS+= varparse-undef-partial 474 1.61 rillig 475 1.280 sjg # Some tests just do not work on some platforms or environments 476 1.280 sjg # so allow for some filtering. 477 1.280 sjg .if !empty(BROKEN_TESTS) 478 1.280 sjg TESTS:= ${TESTS:${BROKEN_TESTS:S,^,N,:ts:}} 479 1.280 sjg .endif 480 1.280 sjg 481 1.201 rillig # Ideas for more tests: 482 1.201 rillig # char-0020-space.mk 483 1.201 rillig # escape-cond-str.mk 484 1.201 rillig # escape-cond-func-arg.mk 485 1.201 rillig # escape-varmod.mk 486 1.201 rillig # escape-varmod-define.mk 487 1.201 rillig # escape-varmod-match.mk 488 1.201 rillig # escape-varname.mk 489 1.201 rillig # escape-varassign-varname.mk 490 1.201 rillig # escape-varassign-varname-cmdline.mk 491 1.201 rillig # escape-varassign-value.mk 492 1.201 rillig # escape-varassign-value-cmdline.mk 493 1.201 rillig # escape-dependency-source.mk 494 1.201 rillig # escape-dependency-target.mk 495 1.201 rillig # escape-for-varname.mk 496 1.201 rillig # escape-for-item.mk 497 1.201 rillig # posix-*.mk (see posix.mk and posix1.mk) 498 1.201 rillig 499 1.98 rillig # Additional environment variables for some of the tests. 500 1.98 rillig # The base environment is -i PATH="$PATH". 501 1.194 rillig ENV.depsrc-optional+= TZ=UTC 502 1.311 rillig ENV.directive-undef= ENV_VAR=env-value 503 1.327 rillig ENV.opt-env= FROM_ENV=value-from-env 504 1.319 sjg ENV.opt-m-include-dir= ${MAKEOBJDIR:DMAKEOBJDIR=${MAKEOBJDIR}} 505 1.65 rillig ENV.varmisc= FROM_ENV=env 506 1.65 rillig ENV.varmisc+= FROM_ENV_BEFORE=env 507 1.65 rillig ENV.varmisc+= FROM_ENV_AFTER=env 508 1.180 rillig ENV.varmod-localtime+= TZ=Europe/Berlin 509 1.196 rillig ENV.varname-vpath+= VPATH=varname-vpath.dir:varname-vpath.dir2 510 1.64 rillig 511 1.64 rillig # Override make flags for some of the tests; default is -k. 512 1.123 rillig # If possible, write ".MAKEFLAGS: -dv" in the test .mk file instead of 513 1.123 rillig # settings FLAGS.test=-dv here, since that is closer to the test code. 514 1.232 rillig FLAGS.cond-func-make= via-cmdline 515 1.232 rillig FLAGS.doterror= # none, especially not -k 516 1.232 rillig FLAGS.jobs-error-indirect= # none, especially not -k 517 1.232 rillig FLAGS.jobs-error-nested= # none, especially not -k 518 1.232 rillig FLAGS.jobs-error-nested-make= # none, especially not -k 519 1.232 rillig FLAGS.varname-empty= -dv '$${:U}=cmdline-u' '=cmdline-plain' 520 1.61 rillig 521 1.137 rillig # Some tests need extra postprocessing. 522 1.310 rillig SED_CMDS.deptgt-phony= ${STD_SED_CMDS.dd} 523 1.310 rillig SED_CMDS.dir= ${STD_SED_CMDS.dd} 524 1.338 rillig SED_CMDS.directive-include-guard= \ 525 1.338 rillig -e '/\.MAKEFLAGS/d' \ 526 1.352 rillig -e '/^Parsing .*:[1-9][0-9]*:/d' \ 527 1.338 rillig -e '/^SetFilenameVars:/d' \ 528 1.339 rillig -e '/^ParseDependency/d' \ 529 1.338 rillig -e '/^ParseEOF:/d' 530 1.216 rillig SED_CMDS.export= -e '/^[^=_A-Za-z0-9]*=/d' 531 1.216 rillig SED_CMDS.export-all= ${SED_CMDS.export} 532 1.216 rillig SED_CMDS.export-env= ${SED_CMDS.export} 533 1.155 rillig SED_CMDS.job-output-long-lines= \ 534 1.155 rillig ${:D Job separators on their own line are ok. } \ 535 1.155 rillig -e '/^--- job-[ab] ---$$/d' \ 536 1.155 rillig ${:D Plain output lines are ok as well. } \ 537 1.155 rillig ${:D They may come in multiples of 1024 or as 10000. } \ 538 1.155 rillig -e '/^aa*$$/d' \ 539 1.155 rillig -e '/^bb*$$/d' \ 540 1.155 rillig ${:D The following lines should rather not occur since the job } \ 541 1.155 rillig ${:D marker should always be at the beginning of the line. } \ 542 1.155 rillig -e '/^aa*--- job-b ---$$/d' \ 543 1.155 rillig -e '/^bb*--- job-a ---$$/d' 544 1.332 sjg 545 1.377 sjg SED_CMDS.gnode-submake= ${STD_SED_CMDS.dj} 546 1.377 sjg SED_CMDS.gnode-submake= ${STD_SED_CMDS.dg2} 547 1.377 sjg 548 1.332 sjg # meta line numbers can vary based on filemon implementation 549 1.357 sjg SED_CMDS.meta-ignore= -e 's,\(\.meta:\)[1-9][0-9]*:,\1<line>:,' 550 1.332 sjg 551 1.278 sjg SED_CMDS.opt-chdir= -e 's,\(nonexistent\).[1-9][0-9]*,\1,' 552 1.215 rillig SED_CMDS.opt-debug-graph1= ${STD_SED_CMDS.dg1} 553 1.266 rillig SED_CMDS.opt-debug-graph2= ${STD_SED_CMDS.dg2} 554 1.266 rillig SED_CMDS.opt-debug-graph3= ${STD_SED_CMDS.dg3} 555 1.350 rillig SED_CMDS.opt-debug-hash= -e 's,\(entries\)=[1-9][0-9],\1=<entries>,' 556 1.362 rillig SED_CMDS.opt-debug-jobs= ${STD_SED_CMDS.dj} 557 1.272 rillig SED_CMDS.opt-debug-lint+= ${STD_SED_CMDS.regex} 558 1.243 rillig SED_CMDS.opt-jobs-no-action= ${STD_SED_CMDS.hide-from-output} 559 1.243 rillig SED_CMDS.opt-no-action-runflags= ${STD_SED_CMDS.hide-from-output} 560 1.301 sjg SED_CMDS.opt-where-am-i= -e '/usr.obj/d' 561 1.378 sjg SED_CMDS.opt-where-am-i+= -e '/\/\//d' 562 1.274 rillig # For Compat_RunCommand, useShell == false. 563 1.240 rillig SED_CMDS.sh-dots= -e 's,^.*\.\.\.:.*,<not found: ...>,' 564 1.274 rillig # For Compat_RunCommand, useShell == true. 565 1.364 rillig SED_CMDS.sh-dots+= -e 's,^make: exec(\(.*\)): .*$$,<not found: \1>,' 566 1.240 rillig SED_CMDS.sh-dots+= -e 's,^\(\*\*\* Error code \)[1-9][0-9]*,\1<nonzero>,' 567 1.367 rillig # Race condition between the child's stdout and make's status. 568 1.245 rillig SED_CMDS.sh-errctl= ${STD_SED_CMDS.dj} 569 1.367 rillig SED_CMDS.sh-errctl+= -e '/^Process with pid/d' 570 1.367 rillig SED_CMDS.sh-errctl+= -e '/^JobFinish:/d' 571 1.244 rillig SED_CMDS.sh-flags= ${STD_SED_CMDS.hide-from-output} 572 1.328 rillig SED_CMDS.sh-leading-hyphen= ${STD_SED_CMDS.shell} 573 1.215 rillig SED_CMDS.suff-main+= ${STD_SED_CMDS.dg1} 574 1.218 rillig SED_CMDS.suff-main-several+= ${STD_SED_CMDS.dg1} 575 1.219 rillig SED_CMDS.suff-transform-debug+= ${STD_SED_CMDS.dg1} 576 1.261 rillig SED_CMDS.var-op-shell+= ${STD_SED_CMDS.shell} 577 1.261 rillig SED_CMDS.var-op-shell+= -e '/command/s,No such.*,not found,' 578 1.261 rillig SED_CMDS.vardebug+= -e 's,${.SHELL},</path/to/shell>,' 579 1.364 rillig SED_CMDS.varmod-mtime+= -e "s,\(mtime for .*\): .*,\1: <ENOENT>," 580 1.375 rillig SED_CMDS.varmod-subst+= ${STD_SED_CMDS.regex} 581 1.272 rillig SED_CMDS.varmod-subst-regex+= ${STD_SED_CMDS.regex} 582 1.320 rillig SED_CMDS.varparse-errors+= ${STD_SED_CMDS.timestamp} 583 1.332 sjg SED_CMDS.varname-dot-make-meta-ignore_filter+= ${SED_CMDS.meta-ignore} 584 1.332 sjg SED_CMDS.varname-dot-make-meta-ignore_paths+= ${SED_CMDS.meta-ignore} 585 1.332 sjg SED_CMDS.varname-dot-make-meta-ignore_patterns+= ${SED_CMDS.meta-ignore} 586 1.356 rillig SED_CMDS.varname-dot-parsedir= -e '/in some cases/ s,^make: [^:]*:,make: <normalized>:,' 587 1.356 rillig SED_CMDS.varname-dot-parsefile= -e '/in some cases/ s,^make: [^:]*:,make: <normalized>:,' 588 1.177 rillig SED_CMDS.varname-dot-shell= -e 's, = /[^ ]*, = (details omitted),g' 589 1.177 rillig SED_CMDS.varname-dot-shell+= -e 's,"/[^" ]*","(details omitted)",g' 590 1.177 rillig SED_CMDS.varname-dot-shell+= -e 's,\[/[^] ]*\],[(details omitted)],g' 591 1.331 sjg SED_CMDS.varname-empty= ${.OBJDIR .PARSEDIR .PATH .SHELL .SYSPATH:L:@v@-e '/\\$v/d'@} 592 1.61 rillig 593 1.64 rillig # Some tests need an additional round of postprocessing. 594 1.313 rillig POSTPROC.depsrc-wait= sed -e '/^---/d' -e 's,^\(: Making 3[abc]\)[123]$$,\1,' 595 1.235 rillig POSTPROC.deptgt-suffixes= awk '/^\#\*\*\* Suffixes/,/^never-stop/' 596 1.377 sjg POSTPROC.gnode-submake= \ 597 1.377 sjg awk '/Begin input graph/, /^\# \.END/ { \ 598 1.377 sjg if (/made,/) print $$0 \ 599 1.377 sjg }' 600 1.313 rillig POSTPROC.varname-dot-make-mode= sed 's,^\(: Making [abc]\)[123]$$,\1,' 601 1.64 rillig 602 1.99 rillig # Some tests reuse other tests, which makes them unnecessarily fragile. 603 1.89 rillig export-all.rawout: export.mk 604 1.89 rillig unexport.rawout: export.mk 605 1.89 rillig unexport-env.rawout: export.mk 606 1.89 rillig 607 1.61 rillig # End of the configuration section. 608 1.61 rillig 609 1.215 rillig # Some standard sed commands, to be used in the SED_CMDS above. 610 1.215 rillig 611 1.310 rillig # In tests that use the debugging option -dd, ignore debugging output that is 612 1.310 rillig # only logged in -DCLEANUP mode. 613 1.344 sjg STD_SED_CMDS.dd= -e '/^OpenDirs_Done:/d' 614 1.344 sjg STD_SED_CMDS.dd+= -e '/^CachedDir /d' 615 1.344 sjg STD_SED_CMDS.dd+= -e 's, ${DEFSYSPATH:U/usr/share/mk} , <defsyspath> ,' 616 1.310 rillig 617 1.245 rillig # Omit details such as process IDs from the output of the -dg1 option. 618 1.235 rillig STD_SED_CMDS.dg1= -e 's,${.CURDIR}$$,<curdir>,' 619 1.235 rillig STD_SED_CMDS.dg1+= -e 's, ${DEFSYSPATH:U/usr/share/mk}$$, <defsyspath>,' 620 1.380 rillig STD_SED_CMDS.dg1+= -e '/^\.MAKE\.PATH_FILEMON/d' 621 1.215 rillig STD_SED_CMDS.dg1+= -e 's,^\(\.MAKE *=\) .*,\1 <details omitted>,' 622 1.215 rillig STD_SED_CMDS.dg1+= -e 's,^\(\.MAKE\.[A-Z_]* *=\) .*,\1 <details omitted>,' 623 1.341 sjg STD_SED_CMDS.dg1+= -e 's,^\(\.MAKE\.JOBS\.C *=\) .*,\1 <details omitted>,' 624 1.215 rillig STD_SED_CMDS.dg1+= -e 's,^\(MACHINE[_ARCH]* *=\) .*,\1 <details omitted>,' 625 1.215 rillig STD_SED_CMDS.dg1+= -e 's,^\(MAKE *=\) .*,\1 <details omitted>,' 626 1.266 rillig STD_SED_CMDS.dg1+= -e 's,^\(\.SHELL *=\) .*,\1 <details omitted>,' 627 1.331 sjg STD_SED_CMDS.dg1+= -e '/\.SYSPATH/d' 628 1.266 rillig 629 1.266 rillig STD_SED_CMDS.dg2= ${STD_SED_CMDS.dg1} 630 1.266 rillig STD_SED_CMDS.dg2+= -e 's,\(last modified\) ..:..:.. ... ..\, ....,\1 <timestamp>,' 631 1.380 rillig 632 1.266 rillig STD_SED_CMDS.dg3= ${STD_SED_CMDS.dg2} 633 1.221 rillig 634 1.245 rillig # Omit details such as process IDs from the output of the -dj option. 635 1.362 rillig STD_SED_CMDS.dj= -e 's, pid [0-9][0-9]*, pid <pid>,' 636 1.362 rillig STD_SED_CMDS.dj+= -e 's,^\(.Command\): ${.SHELL:T},\1: <shell>,' 637 1.362 rillig # The "-q" may be there or not, see jobs.c, variable shells. 638 1.362 rillig STD_SED_CMDS.dj+= -e 's,^\(.Command: <shell>\) -q,\1,' 639 1.245 rillig 640 1.243 rillig # Reduce the noise for tests running with the -n option, since there is no 641 1.243 rillig # other way to suppress the echoing of the commands. 642 1.243 rillig STD_SED_CMDS.hide-from-output= \ 643 1.243 rillig -e '/^echo hide-from-output/d' \ 644 1.243 rillig -e 's,hide-from-output ,,' \ 645 1.243 rillig -e 's,hide-from-output,,' 646 1.243 rillig 647 1.261 rillig # Normalize the output for error messages from the shell. 648 1.261 rillig # 649 1.261 rillig # $shell -c '...' 650 1.261 rillig # NetBSD sh ...: not found 651 1.261 rillig # NetBSD ksh ksh: ...: not found 652 1.262 rillig # bash 5.0.18 bash: ...: command not found 653 1.262 rillig # bash 5.1.0 bash: line 1: ...: command not found 654 1.261 rillig # dash dash: 1: ...: not found 655 1.261 rillig # 656 1.261 rillig # $shell -c '< /nonexistent' 657 1.261 rillig # NetBSD sh sh: cannot open /nonexistent: no such file 658 1.261 rillig # NetBSD ksh ksh: cannot open /nonexistent: No such file or directory 659 1.262 rillig # bash 5.0.18 bash: /nonexistent: No such file or directory 660 1.262 rillig # bash 5.1.0 bash: line 1: /nonexistent: No such file or directory 661 1.261 rillig # dash dash: 1: cannot open /nonexistent: No such file 662 1.261 rillig # 663 1.262 rillig # echo '< /nonexistent' | $shell 664 1.262 rillig # NetBSD sh sh: cannot open /nonexistent: no such file 665 1.262 rillig # NetBSD ksh ksh: <stdin>[1]: cannot open /nonexistent: No such file or directory 666 1.262 rillig # bash 5.0.18 bash: line 1: /nonexistent: No such file or directory 667 1.262 rillig # bash 5.1.0 bash: line 1: /nonexistent: No such file or directory 668 1.262 rillig # dash dash: 1: cannot open /nonexistent: No such file 669 1.261 rillig # 670 1.328 rillig STD_SED_CMDS.shell+= -e 's,^${.SHELL},${.SHELL:T},' 671 1.262 rillig STD_SED_CMDS.shell+= -e 's,^${.SHELL:T}: line [0-9][0-9]*: ,,' 672 1.262 rillig STD_SED_CMDS.shell+= -e 's,^${.SHELL:T}: [0-9][0-9]*: ,,' 673 1.261 rillig STD_SED_CMDS.shell+= -e 's,^${.SHELL:T}: ,,' 674 1.328 rillig STD_SED_CMDS.shell+= -e 's,: command not found,: not found,' 675 1.261 rillig 676 1.272 rillig # The actual error messages for a failed regcomp or regexec differ between the 677 1.272 rillig # implementations. 678 1.272 rillig STD_SED_CMDS.regex= \ 679 1.272 rillig -e 's,\(Regex compilation error:\).*,\1 (details omitted),' 680 1.272 rillig 681 1.321 rillig # Normalize timestamps from ':gmtime' or ':localtime' to '<timestamp>'. 682 1.321 rillig # See STD_SED_CMDS.dg2 for timestamps from the debug log. 683 1.320 rillig STD_SED_CMDS.timestamp= \ 684 1.321 rillig -e 's,[A-Z][a-z][a-z] [A-Z][a-z][a-z] [ 0-9][0-9] [0-9][0-9]:[0-9][0-9]:[0-9][0-9] [12][0-9][0-9][0-9],<timestamp>,' 685 1.320 rillig 686 1.215 rillig # End of the configuration helpers section. 687 1.215 rillig 688 1.61 rillig UNIT_TESTS:= ${.PARSEDIR} 689 1.44 apb .PATH: ${UNIT_TESTS} 690 1.7 sjg 691 1.145 rillig .if ${USE_ABSOLUTE_TESTNAMES:Uno} == yes 692 1.145 rillig OUTFILES= ${TESTS:@test@${.CURDIR:tA}/${test}.out@} 693 1.145 rillig .else 694 1.61 rillig OUTFILES= ${TESTS:=.out} 695 1.145 rillig .endif 696 1.42 apb 697 1.42 apb all: ${OUTFILES} 698 1.9 sjg 699 1.95 rillig CLEANFILES= *.rawout *.out *.status *.tmp *.core *.tmp 700 1.61 rillig CLEANFILES+= obj*.[och] lib*.a # posix1.mk 701 1.61 rillig CLEANFILES+= issue* .[ab]* # suffixes.mk 702 1.345 rillig CLEANDIRS= dir dummy *.tmp # posix1.mk 703 1.48 apb 704 1.1 sjg clean: 705 1.345 rillig rm -rf ${CLEANDIRS} 706 1.48 apb rm -f ${CLEANFILES} 707 1.1 sjg 708 1.61 rillig TEST_MAKE?= ${.MAKE} 709 1.382 sjg .if ${TEST_MAKE:M/*} == "" 710 1.382 sjg # we want an absolute path for TEST_MAKE 711 1.383 sjg tm!= for d in ${PATH:S,:, ,g:M/*}; do \ 712 1.383 sjg test -x $$d/${TEST_MAKE} || continue; \ 713 1.383 sjg echo $$d/${TEST_MAKE}; break; done 714 1.383 sjg .if ${tm:M/*} 715 1.383 sjg TEST_MAKE:= ${tm} 716 1.383 sjg .endif 717 1.382 sjg .endif 718 1.382 sjg 719 1.61 rillig TOOL_SED?= sed 720 1.1 sjg 721 1.28 sjg # ensure consistent results from sort(1) 722 1.61 rillig LC_ALL= C 723 1.61 rillig LANG= C 724 1.29 sjg .export LANG LC_ALL 725 1.28 sjg 726 1.326 rillig # Some Linux systems such as Fedora have deprecated egrep in favor of grep -E. 727 1.325 sjg .if ${.MAKE.OS:NLinux} == "" 728 1.325 sjg EGREP= grep -E 729 1.325 sjg .endif 730 1.326 rillig # Keep the classical definition for all other systems. Just as the bmake code 731 1.326 rillig # is kept compatible with C90, the tests are kept compatible with systems that 732 1.326 rillig # are several decades old and don't follow modern POSIX standards. 733 1.325 sjg EGREP?= egrep 734 1.325 sjg 735 1.325 sjg MAKE_TEST_ENV= EGREP="${EGREP}" 736 1.325 sjg MAKE_TEST_ENV+= MALLOC_OPTIONS="JA" # for jemalloc 100 737 1.287 rillig MAKE_TEST_ENV+= MALLOC_CONF="junk:true" # for jemalloc 510 738 1.269 sjg MAKE_TEST_ENV+= TMPDIR=${TMPDIR} 739 1.153 rillig 740 1.254 sjg .if ${.MAKE.OS} == "NetBSD" 741 1.317 skrll LIMIT_RESOURCES?= ulimit -v 300000 742 1.213 rillig .endif 743 1.213 rillig LIMIT_RESOURCES?= : 744 1.213 rillig 745 1.306 rillig # Each test is run in a sub-make, to keep the tests from interfering with 746 1.138 rillig # each other, and because they use different environment variables and 747 1.138 rillig # command line options. 748 1.42 apb .SUFFIXES: .mk .rawout .out 749 1.379 sjg .mk.rawout: .META 750 1.96 rillig @${_MKMSG_TEST:Uecho '# test '} ${.PREFIX} 751 1.64 rillig @set -eu; \ 752 1.213 rillig ${LIMIT_RESOURCES}; \ 753 1.64 rillig cd ${.OBJDIR}; \ 754 1.153 rillig env -i PATH="$$PATH" ${MAKE_TEST_ENV} ${ENV.${.PREFIX:T}} \ 755 1.98 rillig ${TEST_MAKE} \ 756 1.98 rillig -r -C ${.CURDIR} -f ${.IMPSRC} \ 757 1.145 rillig ${FLAGS.${.PREFIX:T}:U-k} \ 758 1.98 rillig > ${.TARGET}.tmp 2>&1 \ 759 1.64 rillig && status=$$? || status=$$?; \ 760 1.64 rillig echo $$status > ${.TARGET:R}.status 761 1.42 apb @mv ${.TARGET}.tmp ${.TARGET} 762 1.42 apb 763 1.318 rillig # Postprocess the test output to make the output platform-independent. 764 1.62 rillig # 765 1.332 sjg # Replace anything after 'stopped in' with unit-tests 766 1.349 rillig _SED_CMDS+= -e '/stopped/s, in /.*, in unit-tests,' 767 1.294 rillig # Allow the test files to be placed anywhere. 768 1.294 rillig _SED_CMDS+= -e 's,\(\.PARSEDIR}\) = `'"/[^']*'"',\1 = <some-dir>,' 769 1.294 rillig _SED_CMDS+= -e 's,\(\.INCLUDEDFROMDIR}\) = `'"/[^']*'"',\1 = <some-dir>,' 770 1.332 sjg _SED_CMDS+= -e 's,${TMPDIR},<tmpdir>,g' -e 's,${TMPDIR:tA},<tmpdir>,g' 771 1.284 sjg # canonicalize ${.OBJDIR} and ${.CURDIR} 772 1.332 sjg _SED_CMDS+= -e 's,${.CURDIR},<curdir>,g' 773 1.284 sjg .if ${.OBJDIR} != ${.CURDIR} 774 1.284 sjg # yes this is inaccurate but none of the tests expect <objdir> anywhere 775 1.284 sjg # which we get depending on how MAKEOBJDIR is set. 776 1.332 sjg _SED_CMDS+= -e 's,${.OBJDIR},<curdir>,g' -e 's,${.OBJDIR:tA},<curdir>,g' 777 1.284 sjg .endif 778 1.374 sjg 779 1.374 sjg # At the end, make sure we cleanup any dregs... 780 1.374 sjg .for d in ${MAKEOBJDIRPREFIX:S,/$,,} /usr/obj 781 1.374 sjg _SED_CMDS_LAST+= -e 's,$d,,' 782 1.374 sjg .endfor 783 1.374 sjg 784 1.332 sjg # always pretend .MAKE was called 'make' 785 1.332 sjg _SED_CMDS+= -e 's,^${TEST_MAKE:T:S,.,\\.,g}[][0-9]*:,make:,' 786 1.332 sjg _SED_CMDS+= -e 's,${TEST_MAKE:S,.,\\.,g},make,' 787 1.332 sjg _SED_CMDS+= -e 's,^usage: ${TEST_MAKE:T:S,.,\\.,g} ,usage: make ,' 788 1.365 sjg _SED_CMDS+= -e 's,${TEST_MAKE:T:S,.,\\.,g}\(\[[1-9][0-9]*\][: ]\),make\1,' 789 1.284 sjg _SED_CMDS+= -e 's,<curdir>/,,g' 790 1.61 rillig _SED_CMDS+= -e 's,${UNIT_TESTS:S,.,\\.,g}/,,g' 791 1.381 sjg _SED_CMDS+= -e 's,\(\.make\)[1-9][0-9]*,\1,g' 792 1.376 sjg _SED_CMDS+= -e '/MAKE.VERSION/d' 793 1.325 sjg _SED_CMDS+= -e '/EGREP=/d' 794 1.61 rillig 795 1.379 sjg .rawout.out: .META 796 1.374 sjg @${TOOL_SED} ${_SED_CMDS} ${SED_CMDS.${.PREFIX:T}} ${_SED_CMDS_LAST} \ 797 1.353 rillig < ${.IMPSRC} > ${.TARGET}.tmp 798 1.353 rillig @${POSTPROC.${.PREFIX:T}:D \ 799 1.353 rillig ${POSTPROC.${.PREFIX:T}} < ${.TARGET}.tmp > ${.TARGET}.post \ 800 1.353 rillig && mv ${.TARGET}.post ${.TARGET}.tmp} 801 1.353 rillig @echo "exit status `cat ${.TARGET:R}.status`" >> ${.TARGET}.tmp 802 1.353 rillig @mv ${.TARGET}.tmp ${.TARGET} 803 1.42 apb 804 1.42 apb # Compare all output files 805 1.42 apb test: ${OUTFILES} .PHONY 806 1.42 apb @failed= ; \ 807 1.61 rillig for test in ${TESTS}; do \ 808 1.42 apb diff -u ${UNIT_TESTS}/$${test}.exp $${test}.out \ 809 1.42 apb || failed="$${failed}$${failed:+ }$${test}" ; \ 810 1.42 apb done ; \ 811 1.42 apb if [ -n "$${failed}" ]; then \ 812 1.42 apb echo "Failed tests: $${failed}" ; false ; \ 813 1.42 apb else \ 814 1.42 apb echo "All tests passed" ; \ 815 1.346 rillig lua=${LUA:Ulua} ; \ 816 1.346 rillig have_lua=$$("$$lua" -e 'print "yes"' 2>&1) ; \ 817 1.346 rillig if [ "$$have_lua" = "yes" ]; then \ 818 1.347 sjg (cd ${.CURDIR} && "$$lua" ./check-expect.lua *.mk); \ 819 1.346 rillig fi; \ 820 1.42 apb fi 821 1.1 sjg 822 1.1 sjg accept: 823 1.61 rillig @for test in ${TESTS}; do \ 824 1.42 apb cmp -s ${UNIT_TESTS}/$${test}.exp $${test}.out \ 825 1.42 apb || { echo "Replacing $${test}.exp" ; \ 826 1.42 apb cp $${test}.out ${UNIT_TESTS}/$${test}.exp ; } \ 827 1.42 apb done 828 1.1 sjg 829 1.139 rillig # Note: only works for adding tests. 830 1.139 rillig # To remove a test, the $$mi file must be edited manually. 831 1.78 rillig sync-mi: 832 1.78 rillig @set -eu; \ 833 1.78 rillig cd "${MAKEFILE:tA:H}/../../.."; \ 834 1.78 rillig mi="distrib/sets/lists/tests/mi"; \ 835 1.105 rillig cvs update "$$mi"; \ 836 1.139 rillig testsdir="usr.bin/make/unit-tests"; \ 837 1.139 rillig fmt="./usr/tests/$$testsdir/%s\ttests-usr.bin-tests\tcompattestfile,atf\\n"; \ 838 1.182 rillig cat "$$mi" > "$$mi.tmp"; \ 839 1.372 sjg (cd "$$testsdir" && egrep '\.(exp|mk)/' CVS/Entries | cut -d/ -f2) | \ 840 1.324 sjg xargs printf "$$fmt" >> "$$mi.tmp"; \ 841 1.182 rillig distrib/sets/fmt-list "$$mi.tmp"; \ 842 1.182 rillig mv "$$mi.tmp" "$$mi"; \ 843 1.78 rillig cvs diff "$$mi" || true 844 1.78 rillig 845 1.50 sjg .if exists(${TEST_MAKE}) 846 1.168 sjg ${TESTS:=.rawout}: ${TEST_MAKE} 847 1.168 sjg # in meta mode, we *know* if a target script is impacted 848 1.168 sjg # by a makefile change. 849 1.168 sjg .if ${.MAKE.MODE:Unormal:Mmeta} == "" 850 1.168 sjg ${TESTS:=.rawout}: ${.PARSEDIR}/Makefile 851 1.168 sjg .endif 852 1.50 sjg .endif 853 1.50 sjg 854 1.42 apb .-include <bsd.obj.mk> 855
Indexes created Tue Nov 03 00:25:12 UTC 2026