Makefile revision 1.328
1# $NetBSD: Makefile,v 1.328 2023/01/19 19:55:27 rillig Exp $ 2# 3# Unit tests for make(1) 4# 5# The main targets are: 6# 7# all: 8# run all the tests 9# test: 10# run 'all', and compare to expected results 11# accept: 12# move generated output to expected results 13# 14# Settable variables 15# 16# TEST_MAKE 17# The make program to be tested. 18# 19# 20# Adding a test case 21# 22# Each feature should get its own set of tests in its own suitably 23# named makefile (*.mk), with its own set of expected results (*.exp), 24# and it should be added to the TESTS list. 25# 26# Any added files must also be added to src/distrib/sets/lists/tests/mi. 27# To do that, just run "make sync-mi" in this directory. 28# 29# A few *.mk files are helper files for other tests (such as include-sub.mk) 30# and are thus not added to TESTS. Such files must be ignored in 31# src/tests/usr.bin/make/t_make.sh. 32# 33 34.MAIN: all 35 36# we use these below but we might be an older make 37.MAKE.OS?= ${uname -s:L:sh} 38.MAKE.UID?= ${id -u:L:sh} 39 40# Each test is in a sub-makefile. 41# Keep the list sorted. 42# Any test that is commented out must be ignored in 43# src/tests/usr.bin/make/t_make.sh as well. 44TESTS+= archive 45TESTS+= archive-suffix 46TESTS+= cmd-errors 47TESTS+= cmd-errors-jobs 48TESTS+= cmd-errors-lint 49TESTS+= cmd-interrupt 50TESTS+= cmdline 51TESTS+= cmdline-redirect-stdin 52TESTS+= cmdline-undefined 53TESTS+= comment 54TESTS+= compat-error 55TESTS+= cond-cmp-numeric 56TESTS+= cond-cmp-numeric-eq 57TESTS+= cond-cmp-numeric-ge 58TESTS+= cond-cmp-numeric-gt 59TESTS+= cond-cmp-numeric-le 60TESTS+= cond-cmp-numeric-lt 61TESTS+= cond-cmp-numeric-ne 62TESTS+= cond-cmp-string 63TESTS+= cond-cmp-unary 64TESTS+= cond-eof 65TESTS+= cond-func 66TESTS+= cond-func-commands 67TESTS+= cond-func-defined 68TESTS+= cond-func-empty 69TESTS+= cond-func-exists 70TESTS+= cond-func-make 71TESTS+= cond-func-make-main 72TESTS+= cond-func-target 73TESTS+= cond-late 74TESTS+= cond-op 75TESTS+= cond-op-and 76TESTS+= cond-op-and-lint 77TESTS+= cond-op-not 78TESTS+= cond-op-or 79TESTS+= cond-op-or-lint 80TESTS+= cond-op-parentheses 81TESTS+= cond-short 82TESTS+= cond-token-number 83TESTS+= cond-token-plain 84TESTS+= cond-token-string 85TESTS+= cond-token-var 86TESTS+= cond-undef-lint 87TESTS+= counter 88TESTS+= counter-append 89TESTS+= dep 90TESTS+= dep-colon 91TESTS+= dep-colon-bug-cross-file 92TESTS+= dep-double-colon 93TESTS+= dep-double-colon-indep 94TESTS+= dep-duplicate 95TESTS+= dep-exclam 96TESTS+= dep-none 97TESTS+= dep-op-missing 98TESTS+= dep-percent 99TESTS+= dep-var 100TESTS+= dep-wildcards 101TESTS+= depsrc 102TESTS+= depsrc-end 103TESTS+= depsrc-exec 104TESTS+= depsrc-ignore 105TESTS+= depsrc-made 106TESTS+= depsrc-make 107TESTS+= depsrc-meta 108TESTS+= depsrc-nometa 109TESTS+= depsrc-nometa_cmp 110TESTS+= depsrc-nopath 111TESTS+= depsrc-notmain 112TESTS+= depsrc-optional 113TESTS+= depsrc-phony 114TESTS+= depsrc-precious 115TESTS+= depsrc-recursive 116TESTS+= depsrc-silent 117TESTS+= depsrc-use 118TESTS+= depsrc-usebefore 119TESTS+= depsrc-usebefore-double-colon 120TESTS+= depsrc-wait 121TESTS+= deptgt 122TESTS+= deptgt-begin 123TESTS+= deptgt-begin-fail 124TESTS+= deptgt-begin-fail-indirect 125TESTS+= deptgt-default 126TESTS+= deptgt-delete_on_error 127TESTS+= deptgt-end 128TESTS+= deptgt-end-fail 129TESTS+= deptgt-end-fail-all 130TESTS+= deptgt-end-fail-indirect 131TESTS+= deptgt-end-jobs 132TESTS+= deptgt-error 133TESTS+= deptgt-ignore 134TESTS+= deptgt-interrupt 135TESTS+= deptgt-main 136TESTS+= deptgt-makeflags 137TESTS+= deptgt-no_parallel 138TESTS+= deptgt-nopath 139TESTS+= deptgt-notparallel 140TESTS+= deptgt-objdir 141TESTS+= deptgt-order 142TESTS+= deptgt-path 143TESTS+= deptgt-path-suffix 144TESTS+= deptgt-phony 145TESTS+= deptgt-posix 146TESTS+= deptgt-precious 147TESTS+= deptgt-shell 148TESTS+= deptgt-silent 149TESTS+= deptgt-silent-jobs 150TESTS+= deptgt-stale 151TESTS+= deptgt-suffixes 152TESTS+= dir 153TESTS+= dir-expand-path 154TESTS+= directive 155TESTS+= directive-dinclude 156TESTS+= directive-elif 157TESTS+= directive-elifdef 158TESTS+= directive-elifmake 159TESTS+= directive-elifndef 160TESTS+= directive-elifnmake 161TESTS+= directive-else 162TESTS+= directive-endfor 163TESTS+= directive-endif 164TESTS+= directive-error 165TESTS+= directive-export 166TESTS+= directive-export-env 167TESTS+= directive-export-impl 168TESTS+= directive-export-gmake 169TESTS+= directive-export-literal 170TESTS+= directive-for 171TESTS+= directive-for-break 172TESTS+= directive-for-empty 173TESTS+= directive-for-errors 174TESTS+= directive-for-escape 175TESTS+= directive-for-generating-endif 176TESTS+= directive-for-if 177TESTS+= directive-for-lines 178TESTS+= directive-for-null 179TESTS+= directive-hyphen-include 180TESTS+= directive-if 181TESTS+= directive-if-nested 182TESTS+= directive-ifdef 183TESTS+= directive-ifmake 184TESTS+= directive-ifndef 185TESTS+= directive-ifnmake 186TESTS+= directive-include 187TESTS+= directive-include-fatal 188TESTS+= directive-info 189TESTS+= directive-misspellings 190TESTS+= directive-sinclude 191TESTS+= directive-undef 192TESTS+= directive-unexport 193TESTS+= directive-unexport-env 194TESTS+= directive-warning 195TESTS+= dollar 196TESTS+= doterror 197TESTS+= dotwait 198TESTS+= error 199TESTS+= # escape # broken by reverting POSIX changes 200TESTS+= export 201TESTS+= export-all 202TESTS+= export-env 203TESTS+= export-variants 204TESTS+= forloop 205TESTS+= forsubst 206TESTS+= gnode-submake 207TESTS+= hanoi-include 208TESTS+= impsrc 209TESTS+= include-main 210TESTS+= job-flags 211TESTS+= job-output-long-lines 212TESTS+= job-output-null 213TESTS+= jobs-empty-commands 214TESTS+= jobs-empty-commands-error 215TESTS+= jobs-error-indirect 216TESTS+= jobs-error-nested 217TESTS+= jobs-error-nested-make 218TESTS+= lint 219TESTS+= make-exported 220TESTS+= meta-cmd-cmp 221TESTS+= moderrs 222TESTS+= modmatch 223TESTS+= modmisc 224.if ${.MAKE.UID} > 0 225TESTS+= objdir-writable 226.endif 227TESTS+= opt 228TESTS+= opt-backwards 229TESTS+= opt-chdir 230TESTS+= opt-debug 231TESTS+= opt-debug-all 232TESTS+= opt-debug-archive 233TESTS+= opt-debug-curdir 234TESTS+= opt-debug-cond 235TESTS+= opt-debug-dir 236TESTS+= opt-debug-errors 237TESTS+= opt-debug-errors-jobs 238TESTS+= opt-debug-file 239TESTS+= opt-debug-for 240TESTS+= opt-debug-graph1 241TESTS+= opt-debug-graph2 242TESTS+= opt-debug-graph3 243TESTS+= opt-debug-hash 244TESTS+= opt-debug-jobs 245TESTS+= opt-debug-lint 246TESTS+= opt-debug-loud 247TESTS+= opt-debug-meta 248TESTS+= opt-debug-making 249TESTS+= opt-debug-no-rm 250TESTS+= opt-debug-parse 251TESTS+= opt-debug-suff 252TESTS+= opt-debug-targets 253TESTS+= opt-debug-varraw 254TESTS+= opt-debug-var 255TESTS+= opt-debug-x-trace 256TESTS+= opt-define 257TESTS+= opt-env 258TESTS+= opt-file 259TESTS+= opt-ignore 260TESTS+= opt-include-dir 261TESTS+= opt-jobs 262TESTS+= opt-jobs-internal 263TESTS+= opt-jobs-no-action 264TESTS+= opt-keep-going 265TESTS+= opt-keep-going-indirect 266TESTS+= opt-keep-going-multiple 267TESTS+= opt-m-include-dir 268TESTS+= opt-no-action 269TESTS+= opt-no-action-at-all 270TESTS+= opt-no-action-runflags 271TESTS+= opt-no-action-touch 272TESTS+= opt-query 273TESTS+= opt-raw 274TESTS+= opt-silent 275TESTS+= opt-touch 276TESTS+= opt-touch-jobs 277TESTS+= opt-tracefile 278TESTS+= opt-var-expanded 279TESTS+= opt-var-literal 280TESTS+= opt-version 281TESTS+= opt-warnings-as-errors 282TESTS+= opt-where-am-i 283TESTS+= opt-x-reduce-exported 284TESTS+= order 285TESTS+= parse 286TESTS+= parse-var 287TESTS+= phony-end 288TESTS+= posix 289TESTS+= # posix1 # broken by reverting POSIX changes 290TESTS+= recursive 291TESTS+= sh 292TESTS+= sh-dots 293TESTS+= sh-errctl 294TESTS+= sh-flags 295TESTS+= sh-jobs 296TESTS+= sh-jobs-error 297TESTS+= sh-leading-at 298TESTS+= sh-leading-hyphen 299TESTS+= sh-leading-plus 300TESTS+= sh-meta-chars 301TESTS+= sh-multi-line 302TESTS+= sh-single-line 303TESTS+= shell-csh 304TESTS+= shell-custom 305TESTS+= shell-ksh 306TESTS+= shell-sh 307TESTS+= suff-add-later 308TESTS+= suff-clear-regular 309TESTS+= suff-clear-single 310TESTS+= suff-incomplete 311TESTS+= suff-lookup 312TESTS+= suff-main 313TESTS+= suff-main-several 314TESTS+= suff-phony 315TESTS+= suff-rebuild 316TESTS+= suff-self 317TESTS+= suff-transform-debug 318TESTS+= suff-transform-endless 319TESTS+= suff-transform-expand 320TESTS+= suff-transform-select 321TESTS+= suff-use 322TESTS+= sunshcmd 323TESTS+= ternary 324TESTS+= unexport 325TESTS+= unexport-env 326TESTS+= use-inference 327TESTS+= var-scope 328TESTS+= var-scope-cmdline 329TESTS+= var-scope-env 330TESTS+= var-scope-global 331TESTS+= var-scope-local 332TESTS+= var-scope-local-legacy 333TESTS+= var-eval-short 334TESTS+= var-op 335TESTS+= var-op-append 336TESTS+= var-op-assign 337TESTS+= var-op-default 338TESTS+= var-op-expand 339TESTS+= var-op-shell 340TESTS+= var-op-sunsh 341TESTS+= var-recursive 342TESTS+= varcmd 343TESTS+= vardebug 344TESTS+= varfind 345TESTS+= varmisc 346TESTS+= varmod 347TESTS+= varmod-assign 348TESTS+= varmod-assign-shell 349TESTS+= varmod-defined 350TESTS+= varmod-edge 351TESTS+= varmod-exclam-shell 352TESTS+= varmod-extension 353TESTS+= varmod-gmtime 354TESTS+= varmod-hash 355TESTS+= varmod-head 356TESTS+= varmod-ifelse 357TESTS+= varmod-indirect 358TESTS+= varmod-l-name-to-value 359TESTS+= varmod-localtime 360TESTS+= varmod-loop 361TESTS+= varmod-loop-delete 362TESTS+= varmod-loop-varname 363TESTS+= varmod-match 364TESTS+= varmod-match-escape 365TESTS+= varmod-no-match 366TESTS+= varmod-order 367TESTS+= varmod-order-numeric 368TESTS+= varmod-order-reverse 369TESTS+= varmod-order-shuffle 370TESTS+= varmod-order-string 371TESTS+= varmod-path 372TESTS+= varmod-quote 373TESTS+= varmod-quote-dollar 374TESTS+= varmod-range 375TESTS+= varmod-remember 376TESTS+= varmod-root 377TESTS+= varmod-select-words 378TESTS+= varmod-shell 379TESTS+= varmod-subst 380TESTS+= varmod-subst-regex 381TESTS+= varmod-sun-shell 382TESTS+= varmod-sysv 383TESTS+= varmod-tail 384TESTS+= varmod-to-abs 385TESTS+= varmod-to-lower 386TESTS+= varmod-to-many-words 387TESTS+= varmod-to-one-word 388TESTS+= varmod-to-separator 389TESTS+= varmod-to-upper 390TESTS+= varmod-undefined 391TESTS+= varmod-unique 392TESTS+= varname 393TESTS+= varname-dollar 394TESTS+= varname-dot-alltargets 395TESTS+= varname-dot-curdir 396TESTS+= varname-dot-includes 397TESTS+= varname-dot-includedfromdir 398TESTS+= varname-dot-includedfromfile 399TESTS+= varname-dot-libs 400TESTS+= varname-dot-make-dependfile 401TESTS+= varname-dot-make-expand_variables 402TESTS+= varname-dot-make-exported 403TESTS+= varname-dot-make-jobs 404TESTS+= varname-dot-make-jobs-prefix 405TESTS+= varname-dot-make-level 406TESTS+= varname-dot-make-makefile_preference 407TESTS+= varname-dot-make-makefiles 408TESTS+= varname-dot-make-meta-bailiwick 409TESTS+= varname-dot-make-meta-created 410TESTS+= varname-dot-make-meta-files 411TESTS+= varname-dot-make-meta-ignore_filter 412TESTS+= varname-dot-make-meta-ignore_paths 413TESTS+= varname-dot-make-meta-ignore_patterns 414TESTS+= varname-dot-make-meta-prefix 415TESTS+= varname-dot-make-mode 416TESTS+= varname-dot-make-path_filemon 417TESTS+= varname-dot-make-pid 418TESTS+= varname-dot-make-ppid 419TESTS+= varname-dot-make-save_dollars 420TESTS+= varname-dot-makeflags 421TESTS+= varname-dot-makeoverrides 422TESTS+= varname-dot-newline 423TESTS+= varname-dot-objdir 424TESTS+= varname-dot-parsedir 425TESTS+= varname-dot-parsefile 426TESTS+= varname-dot-path 427TESTS+= varname-dot-shell 428TESTS+= varname-dot-suffixes 429TESTS+= varname-dot-targets 430TESTS+= varname-empty 431TESTS+= varname-make 432TESTS+= varname-make_print_var_on_error 433TESTS+= varname-make_print_var_on_error-jobs 434TESTS+= varname-makefile 435TESTS+= varname-makeflags 436TESTS+= varname-pwd 437TESTS+= varname-vpath 438TESTS+= varparse-dynamic 439TESTS+= varparse-errors 440TESTS+= varparse-mod 441TESTS+= varparse-undef-partial 442 443# Some tests just do not work on some platforms or environments 444# so allow for some filtering. 445.if !empty(BROKEN_TESTS) 446TESTS:= ${TESTS:${BROKEN_TESTS:S,^,N,:ts:}} 447.endif 448 449# Ideas for more tests: 450# char-0020-space.mk 451# char-005C-backslash.mk 452# escape-cond-str.mk 453# escape-cond-func-arg.mk 454# escape-varmod.mk 455# escape-varmod-define.mk 456# escape-varmod-match.mk 457# escape-varname.mk 458# escape-varassign-varname.mk 459# escape-varassign-varname-cmdline.mk 460# escape-varassign-value.mk 461# escape-varassign-value-cmdline.mk 462# escape-dependency-source.mk 463# escape-dependency-target.mk 464# escape-for-varname.mk 465# escape-for-item.mk 466# posix-*.mk (see posix.mk and posix1.mk) 467 468# Additional environment variables for some of the tests. 469# The base environment is -i PATH="$PATH". 470ENV.depsrc-optional+= TZ=UTC 471ENV.directive-undef= ENV_VAR=env-value 472ENV.opt-env= FROM_ENV=value-from-env 473ENV.opt-m-include-dir= ${MAKEOBJDIR:DMAKEOBJDIR=${MAKEOBJDIR}} 474ENV.varmisc= FROM_ENV=env 475ENV.varmisc+= FROM_ENV_BEFORE=env 476ENV.varmisc+= FROM_ENV_AFTER=env 477ENV.varmod-localtime+= TZ=Europe/Berlin 478ENV.varname-vpath+= VPATH=varname-vpath.dir:varname-vpath.dir2 479 480# Override make flags for some of the tests; default is -k. 481# If possible, write ".MAKEFLAGS: -dv" in the test .mk file instead of 482# settings FLAGS.test=-dv here, since that is closer to the test code. 483FLAGS.cond-func-make= via-cmdline 484FLAGS.doterror= # none, especially not -k 485FLAGS.jobs-error-indirect= # none, especially not -k 486FLAGS.jobs-error-nested= # none, especially not -k 487FLAGS.jobs-error-nested-make= # none, especially not -k 488FLAGS.varname-empty= -dv '$${:U}=cmdline-u' '=cmdline-plain' 489 490# Some tests need extra postprocessing. 491SED_CMDS.deptgt-phony= ${STD_SED_CMDS.dd} 492SED_CMDS.dir= ${STD_SED_CMDS.dd} 493SED_CMDS.export= -e '/^[^=_A-Za-z0-9]*=/d' 494SED_CMDS.export-all= ${SED_CMDS.export} 495SED_CMDS.export-env= ${SED_CMDS.export} 496SED_CMDS.job-output-long-lines= \ 497 ${:D Job separators on their own line are ok. } \ 498 -e '/^--- job-[ab] ---$$/d' \ 499 ${:D Plain output lines are ok as well. } \ 500 ${:D They may come in multiples of 1024 or as 10000. } \ 501 -e '/^aa*$$/d' \ 502 -e '/^bb*$$/d' \ 503 ${:D The following lines should rather not occur since the job } \ 504 ${:D marker should always be at the beginning of the line. } \ 505 -e '/^aa*--- job-b ---$$/d' \ 506 -e '/^bb*--- job-a ---$$/d' 507SED_CMDS.opt-chdir= -e 's,\(nonexistent\).[1-9][0-9]*,\1,' 508SED_CMDS.opt-debug-graph1= ${STD_SED_CMDS.dg1} 509SED_CMDS.opt-debug-graph2= ${STD_SED_CMDS.dg2} 510SED_CMDS.opt-debug-graph3= ${STD_SED_CMDS.dg3} 511SED_CMDS.opt-debug-hash= -e 's,\(numEntries\)=[1-9][0-9],\1=<entries>,' 512SED_CMDS.opt-debug-jobs= -e 's,([0-9][0-9]*),(<pid>),' 513SED_CMDS.opt-debug-jobs+= -e 's,pid [0-9][0-9]*,pid <pid>,' 514SED_CMDS.opt-debug-jobs+= -e 's,Process [0-9][0-9]*,Process <pid>,' 515SED_CMDS.opt-debug-jobs+= -e 's,JobFinish: [0-9][0-9]*,JobFinish: <pid>,' 516SED_CMDS.opt-debug-jobs+= -e 's,Command: ${.SHELL:T},Command: <shell>,' 517# The "-q" may be there or not, see jobs.c, variable shells. 518SED_CMDS.opt-debug-jobs+= -e 's,^\(.Command: <shell>\) -q,\1,' 519SED_CMDS.opt-debug-lint+= ${STD_SED_CMDS.regex} 520SED_CMDS.opt-jobs-no-action= ${STD_SED_CMDS.hide-from-output} 521SED_CMDS.opt-no-action-runflags= ${STD_SED_CMDS.hide-from-output} 522SED_CMDS.opt-where-am-i= -e '/usr.obj/d' 523# For Compat_RunCommand, useShell == false. 524SED_CMDS.sh-dots= -e 's,^.*\.\.\.:.*,<not found: ...>,' 525# For Compat_RunCommand, useShell == true. 526SED_CMDS.sh-dots+= -e 's,^make: exec(\(.*\)) failed (.*)$$,<not found: \1>,' 527SED_CMDS.sh-dots+= -e 's,^\(\*\*\* Error code \)[1-9][0-9]*,\1<nonzero>,' 528SED_CMDS.sh-errctl= ${STD_SED_CMDS.dj} 529SED_CMDS.sh-flags= ${STD_SED_CMDS.hide-from-output} 530SED_CMDS.sh-leading-hyphen= ${STD_SED_CMDS.shell} 531SED_CMDS.suff-main+= ${STD_SED_CMDS.dg1} 532SED_CMDS.suff-main-several+= ${STD_SED_CMDS.dg1} 533SED_CMDS.suff-transform-debug+= ${STD_SED_CMDS.dg1} 534SED_CMDS.var-op-shell+= ${STD_SED_CMDS.shell} 535SED_CMDS.var-op-shell+= -e '/command/s,No such.*,not found,' 536SED_CMDS.vardebug+= -e 's,${.SHELL},</path/to/shell>,' 537SED_CMDS.varmod-subst-regex+= ${STD_SED_CMDS.regex} 538SED_CMDS.varparse-errors+= ${STD_SED_CMDS.timestamp} 539SED_CMDS.varname-dot-parsedir= -e '/in some cases/ s,^make: "[^"]*,make: "<normalized>,' 540SED_CMDS.varname-dot-parsefile= -e '/in some cases/ s,^make: "[^"]*,make: "<normalized>,' 541SED_CMDS.varname-dot-shell= -e 's, = /[^ ]*, = (details omitted),g' 542SED_CMDS.varname-dot-shell+= -e 's,"/[^" ]*","(details omitted)",g' 543SED_CMDS.varname-dot-shell+= -e 's,\[/[^] ]*\],[(details omitted)],g' 544SED_CMDS.varname-empty= ${.OBJDIR .PARSEDIR .PATH .SHELL:L:@v@-e '/\\$v/d'@} 545 546# Some tests need an additional round of postprocessing. 547POSTPROC.depsrc-wait= sed -e '/^---/d' -e 's,^\(: Making 3[abc]\)[123]$$,\1,' 548POSTPROC.deptgt-suffixes= awk '/^\#\*\*\* Suffixes/,/^never-stop/' 549POSTPROC.gnode-submake= awk '/Input graph/, /^$$/' 550POSTPROC.varname-dot-make-mode= sed 's,^\(: Making [abc]\)[123]$$,\1,' 551 552# Some tests reuse other tests, which makes them unnecessarily fragile. 553export-all.rawout: export.mk 554unexport.rawout: export.mk 555unexport-env.rawout: export.mk 556 557# End of the configuration section. 558 559# Some standard sed commands, to be used in the SED_CMDS above. 560 561# In tests that use the debugging option -dd, ignore debugging output that is 562# only logged in -DCLEANUP mode. 563STD_SED_CMDS.dd= -e '/^OpenDirs_Done:/d' 564STD_SED_CMDS.dd+= -e '/^CachedDir /d' 565 566# Omit details such as process IDs from the output of the -dg1 option. 567STD_SED_CMDS.dg1= -e 's,${.CURDIR}$$,<curdir>,' 568STD_SED_CMDS.dg1+= -e 's, ${DEFSYSPATH:U/usr/share/mk}$$, <defsyspath>,' 569STD_SED_CMDS.dg1+= -e 's,^\(\.MAKE *=\) .*,\1 <details omitted>,' 570STD_SED_CMDS.dg1+= -e 's,^\(\.MAKE\.[A-Z_]* *=\) .*,\1 <details omitted>,' 571STD_SED_CMDS.dg1+= -e 's,^\(MACHINE[_ARCH]* *=\) .*,\1 <details omitted>,' 572STD_SED_CMDS.dg1+= -e 's,^\(MAKE *=\) .*,\1 <details omitted>,' 573STD_SED_CMDS.dg1+= -e 's,^\(\.SHELL *=\) .*,\1 <details omitted>,' 574 575STD_SED_CMDS.dg2= ${STD_SED_CMDS.dg1} 576STD_SED_CMDS.dg2+= -e 's,\(last modified\) ..:..:.. ... ..\, ....,\1 <timestamp>,' 577STD_SED_CMDS.dg3= ${STD_SED_CMDS.dg2} 578 579# Omit details such as process IDs from the output of the -dj option. 580STD_SED_CMDS.dj= \ 581 -e '/Process/d;/JobFinish:/d' \ 582 -e 's,^\(Job_TokenWithdraw\)([0-9]*),\1(<pid>),' \ 583 -e 's,^([0-9][0-9]*) \(withdrew token\),(<pid>) \1,' \ 584 -e 's, \(pid\) [0-9][0-9]*, \1 <pid>,' \ 585 -e 's,^\( Command:\) .*,\1 <shell>,' 586 587# Reduce the noise for tests running with the -n option, since there is no 588# other way to suppress the echoing of the commands. 589STD_SED_CMDS.hide-from-output= \ 590 -e '/^echo hide-from-output/d' \ 591 -e 's,hide-from-output ,,' \ 592 -e 's,hide-from-output,,' 593 594# Normalize the output for error messages from the shell. 595# 596# $shell -c '...' 597# NetBSD sh ...: not found 598# NetBSD ksh ksh: ...: not found 599# bash 5.0.18 bash: ...: command not found 600# bash 5.1.0 bash: line 1: ...: command not found 601# dash dash: 1: ...: not found 602# 603# $shell -c '< /nonexistent' 604# NetBSD sh sh: cannot open /nonexistent: no such file 605# NetBSD ksh ksh: cannot open /nonexistent: No such file or directory 606# bash 5.0.18 bash: /nonexistent: No such file or directory 607# bash 5.1.0 bash: line 1: /nonexistent: No such file or directory 608# dash dash: 1: cannot open /nonexistent: No such file 609# 610# echo '< /nonexistent' | $shell 611# NetBSD sh sh: cannot open /nonexistent: no such file 612# NetBSD ksh ksh: <stdin>[1]: cannot open /nonexistent: No such file or directory 613# bash 5.0.18 bash: line 1: /nonexistent: No such file or directory 614# bash 5.1.0 bash: line 1: /nonexistent: No such file or directory 615# dash dash: 1: cannot open /nonexistent: No such file 616# 617STD_SED_CMDS.shell+= -e 's,^${.SHELL},${.SHELL:T},' 618STD_SED_CMDS.shell+= -e 's,^${.SHELL:T}: line [0-9][0-9]*: ,,' 619STD_SED_CMDS.shell+= -e 's,^${.SHELL:T}: [0-9][0-9]*: ,,' 620STD_SED_CMDS.shell+= -e 's,^${.SHELL:T}: ,,' 621STD_SED_CMDS.shell+= -e 's,: command not found,: not found,' 622 623# The actual error messages for a failed regcomp or regexec differ between the 624# implementations. 625STD_SED_CMDS.regex= \ 626 -e 's,\(Regex compilation error:\).*,\1 (details omitted),' 627 628# Normalize timestamps from ':gmtime' or ':localtime' to '<timestamp>'. 629# See STD_SED_CMDS.dg2 for timestamps from the debug log. 630STD_SED_CMDS.timestamp= \ 631 -e 's,[A-Z][a-z][a-z] [A-Z][a-z][a-z] [ 0-9][0-9] [0-9][0-9]:[0-9][0-9]:[0-9][0-9] [12][0-9][0-9][0-9],<timestamp>,' 632 633# End of the configuration helpers section. 634 635UNIT_TESTS:= ${.PARSEDIR} 636.PATH: ${UNIT_TESTS} 637 638.if ${USE_ABSOLUTE_TESTNAMES:Uno} == yes 639OUTFILES= ${TESTS:@test@${.CURDIR:tA}/${test}.out@} 640.else 641OUTFILES= ${TESTS:=.out} 642.endif 643 644all: ${OUTFILES} 645 646CLEANFILES= *.rawout *.out *.status *.tmp *.core *.tmp 647CLEANFILES+= obj*.[och] lib*.a # posix1.mk 648CLEANFILES+= issue* .[ab]* # suffixes.mk 649CLEANDIRS= dir dummy # posix1.mk 650 651clean: 652 rm -f ${CLEANFILES} 653 rm -rf ${CLEANDIRS} 654 655TEST_MAKE?= ${.MAKE} 656TOOL_SED?= sed 657 658# ensure consistent results from sort(1) 659LC_ALL= C 660LANG= C 661.export LANG LC_ALL 662 663 664# for many tests we need a TMPDIR that will not collide 665# with other users. 666.if ${.OBJDIR} != ${.CURDIR} 667# easy 668TMPDIR:= ${.OBJDIR}/tmp 669.elif defined(TMPDIR) 670TMPDIR:= ${TMPDIR}/uid${.MAKE.UID} 671.else 672TMPDIR:= /tmp/uid${.MAKE.UID} 673.endif 674# make sure it exists 675.if !exist(${TMPDIR}) 676_!= mkdir -p ${TMPDIR} 677.endif 678 679# Some Linux systems such as Fedora have deprecated egrep in favor of grep -E. 680.if ${.MAKE.OS:NLinux} == "" 681EGREP= grep -E 682.endif 683# Keep the classical definition for all other systems. Just as the bmake code 684# is kept compatible with C90, the tests are kept compatible with systems that 685# are several decades old and don't follow modern POSIX standards. 686EGREP?= egrep 687 688MAKE_TEST_ENV= EGREP="${EGREP}" 689MAKE_TEST_ENV+= MALLOC_OPTIONS="JA" # for jemalloc 100 690MAKE_TEST_ENV+= MALLOC_CONF="junk:true" # for jemalloc 510 691MAKE_TEST_ENV+= TMPDIR=${TMPDIR} 692 693.if ${.MAKE.OS} == "NetBSD" 694LIMIT_RESOURCES?= ulimit -v 300000 695.endif 696LIMIT_RESOURCES?= : 697 698# Each test is run in a sub-make, to keep the tests from interfering with 699# each other, and because they use different environment variables and 700# command line options. 701.SUFFIXES: .mk .rawout .out 702.mk.rawout: 703 @${_MKMSG_TEST:Uecho '# test '} ${.PREFIX} 704 @set -eu; \ 705 ${LIMIT_RESOURCES}; \ 706 cd ${.OBJDIR}; \ 707 env -i PATH="$$PATH" ${MAKE_TEST_ENV} ${ENV.${.PREFIX:T}} \ 708 ${TEST_MAKE} \ 709 -r -C ${.CURDIR} -f ${.IMPSRC} \ 710 ${FLAGS.${.PREFIX:T}:U-k} \ 711 > ${.TARGET}.tmp 2>&1 \ 712 && status=$$? || status=$$?; \ 713 echo $$status > ${.TARGET:R}.status 714 @mv ${.TARGET}.tmp ${.TARGET} 715 716# Postprocess the test output to make the output platform-independent. 717# 718# always pretend .MAKE was called 'make' 719_SED_CMDS+= -e 's,^${TEST_MAKE:T:S,.,\\.,g}[][0-9]*:,make:,' 720_SED_CMDS+= -e 's,${TEST_MAKE:S,.,\\.,g},make,' 721_SED_CMDS+= -e 's,^usage: ${TEST_MAKE:T:S,.,\\.,g} ,usage: make ,' 722# replace anything after 'stopped in' with unit-tests 723_SED_CMDS+= -e '/stopped/s, /.*, unit-tests,' 724# Allow the test files to be placed anywhere. 725_SED_CMDS+= -e 's,\(\.PARSEDIR}\) = `'"/[^']*'"',\1 = <some-dir>,' 726_SED_CMDS+= -e 's,\(\.INCLUDEDFROMDIR}\) = `'"/[^']*'"',\1 = <some-dir>,' 727_SED_CMDS+= -e 's,${TMPDIR},<tmpdir>,g' 728# canonicalize ${.OBJDIR} and ${.CURDIR} 729.if ${.OBJDIR} != ${.CURDIR} 730# yes this is inaccurate but none of the tests expect <objdir> anywhere 731# which we get depending on how MAKEOBJDIR is set. 732_SED_CMDS+= -e 's,${.OBJDIR},<curdir>,g' 733.endif 734_SED_CMDS+= -e 's,${.CURDIR},<curdir>,g' 735_SED_CMDS+= -e 's,<curdir>/,,g' 736_SED_CMDS+= -e 's,${UNIT_TESTS:S,.,\\.,g}/,,g' 737_SED_CMDS+= -e '/MAKE_VERSION/d' 738_SED_CMDS+= -e '/EGREP=/d' 739 740.rawout.out: 741 @${TOOL_SED} ${_SED_CMDS} ${SED_CMDS.${.PREFIX:T}} \ 742 < ${.IMPSRC} > ${.TARGET}.tmp1 743 @${POSTPROC.${.PREFIX:T}:Ucat} < ${.TARGET}.tmp1 > ${.TARGET}.tmp2 744 @rm ${.TARGET}.tmp1 745 @echo "exit status `cat ${.TARGET:R}.status`" >> ${.TARGET}.tmp2 746 @mv ${.TARGET}.tmp2 ${.TARGET} 747 748# Compare all output files 749test: ${OUTFILES} .PHONY 750 @failed= ; \ 751 for test in ${TESTS}; do \ 752 diff -u ${UNIT_TESTS}/$${test}.exp $${test}.out \ 753 || failed="$${failed}$${failed:+ }$${test}" ; \ 754 done ; \ 755 if [ -n "$${failed}" ]; then \ 756 echo "Failed tests: $${failed}" ; false ; \ 757 else \ 758 echo "All tests passed" ; \ 759 fi 760 761accept: 762 @for test in ${TESTS}; do \ 763 cmp -s ${UNIT_TESTS}/$${test}.exp $${test}.out \ 764 || { echo "Replacing $${test}.exp" ; \ 765 cp $${test}.out ${UNIT_TESTS}/$${test}.exp ; } \ 766 done 767 768# Note: only works for adding tests. 769# To remove a test, the $$mi file must be edited manually. 770sync-mi: 771 @set -eu; \ 772 cd "${MAKEFILE:tA:H}/../../.."; \ 773 mi="distrib/sets/lists/tests/mi"; \ 774 cvs update "$$mi"; \ 775 testsdir="usr.bin/make/unit-tests"; \ 776 fmt="./usr/tests/$$testsdir/%s\ttests-usr.bin-tests\tcompattestfile,atf\\n"; \ 777 cat "$$mi" > "$$mi.tmp"; \ 778 (cd "$$testsdir" && egrep '\.(exp|mk)/' CVS/Entries | cut -d/ -f2) | \ 779 xargs printf "$$fmt" >> "$$mi.tmp"; \ 780 distrib/sets/fmt-list "$$mi.tmp"; \ 781 mv "$$mi.tmp" "$$mi"; \ 782 cvs diff "$$mi" || true 783 784.if exists(${TEST_MAKE}) 785${TESTS:=.rawout}: ${TEST_MAKE} 786# in meta mode, we *know* if a target script is impacted 787# by a makefile change. 788.if ${.MAKE.MODE:Unormal:Mmeta} == "" 789${TESTS:=.rawout}: ${.PARSEDIR}/Makefile 790.endif 791.endif 792 793.-include <bsd.obj.mk> 794