Makefile revision 1.80 
1# $NetBSD: Makefile,v 1.80 2020/08/01 18:14:08 rillig Exp $
2#
3# Unit tests for make(1)
4#
5# The main targets are:
6#
7# all:
8#	run all the tests
9# test:
10#	run 'all', and compare to expected results
11# accept:
12#	move generated output to expected results
13#
14# Settable variables
15#
16# TEST_MAKE
17#	The make program to be tested.
18#
19#
20# Adding a test case
21#
22# Each feature should get its own set of tests in its own suitably
23# named makefile (*.mk), with its own set of expected results (*.exp),
24# and it should be added to the TESTS list.
25#
26# Any added files must also be added to src/distrib/sets/lists/tests/mi.
27# To do that, just run "make sync-mi" in this directory.
28#
29# A few *.mk files are helper files for other tests (such as include-sub.mk)
30# and are thus not added to TESTS.  Such files must be ignored in
31# src/tests/usr.bin/make/t_make.sh.
32#
33
34# Each test is in a sub-makefile.
35# Keep the list sorted.
36TESTS+=		# archive	# broken on FreeBSD
37TESTS+=		cmdline
38TESTS+=		comment
39TESTS+=		cond-late
40TESTS+=		cond-short
41TESTS+=		cond1
42TESTS+=		cond2
43TESTS+=		dir
44TESTS+=		directives
45TESTS+=		dollar
46TESTS+=		doterror
47TESTS+=		dotwait
48TESTS+=		envfirst
49TESTS+=		error
50TESTS+=		# escape	# broken by reverting POSIX changes
51TESTS+=		export
52TESTS+=		export-all
53TESTS+=		export-env
54TESTS+=		forloop
55TESTS+=		forsubst
56TESTS+=		hash
57TESTS+=		# impsrc	# broken by reverting POSIX changes
58TESTS+=		include-main
59TESTS+=		misc
60TESTS+=		moderrs
61TESTS+=		modmatch
62TESTS+=		modmisc
63TESTS+=		modorder
64TESTS+=		modts
65TESTS+=		modword
66TESTS+=		order
67TESTS+=		# phony-end	# broken by reverting POSIX changes
68TESTS+=		posix
69TESTS+=		# posix1	# broken by reverting POSIX changes
70TESTS+=		qequals
71TESTS+=		# suffixes	# broken by reverting POSIX changes
72TESTS+=		sunshcmd
73TESTS+=		sysv
74TESTS+=		ternary
75TESTS+=		unexport
76TESTS+=		unexport-env
77TESTS+=		varcmd
78TESTS+=		vardebug
79TESTS+=		varfind
80TESTS+=		varmisc
81TESTS+=		varmod-edge
82TESTS+=		varparse-dynamic
83TESTS+=		varquote
84TESTS+=		varshell
85
86# Override environment variables for some of the tests.
87ENV.envfirst=		FROM_ENV=value-from-env
88ENV.export=		-i PATH=${PATH:Q}
89ENV.varmisc=		FROM_ENV=env
90ENV.varmisc+=		FROM_ENV_BEFORE=env
91ENV.varmisc+=		FROM_ENV_AFTER=env
92
93# Override make flags for some of the tests; default is -k.
94FLAGS.doterror=		# none
95FLAGS.envfirst=		-e
96FLAGS.export=		-r
97FLAGS.order=		-j1
98FLAGS.vardebug=		-k -dv FROM_CMDLINE=
99
100# Some tests need extra post-processing.
101SED_CMDS.moderrs+=	-e 's,\(Regex compilation error:\).*,\1 (details omitted),'
102SED_CMDS.modmisc+=	-e 's,\(Regex compilation error:\).*,\1 (details omitted),'
103SED_CMDS.varmod-edge+=	-e 's, line [0-9]*:, line omitted:,'
104SED_CMDS.varshell+=	-e 's,^[a-z]*sh: ,,'
105SED_CMDS.varshell+=	-e '/command/s,No such.*,not found,'
106
107# Some tests need an additional round of postprocessing.
108POSTPROC.vardebug=	${TOOL_SED} -n -e '/:RELEVANT = yes/,/:RELEVANT = no/p'
109
110# End of the configuration section.
111
112.MAIN: all
113
114UNIT_TESTS:=	${.PARSEDIR}
115.PATH: ${UNIT_TESTS}
116
117OUTFILES=	${TESTS:=.out}
118
119all: ${OUTFILES}
120
121CLEANFILES+=		*.rawout *.out *.status *.tmp *.core *.tmp
122CLEANFILES+=		obj*.[och] lib*.a	# posix1.mk
123CLEANFILES+=		issue* .[ab]*		# suffixes.mk
124CLEANRECURSIVE+=	dir dummy		# posix1.mk
125
126clean:
127	rm -f ${CLEANFILES}
128.if !empty(CLEANRECURSIVE)
129	rm -rf ${CLEANRECURSIVE}
130.endif
131
132TEST_MAKE?=	${.MAKE}
133TOOL_SED?=	sed
134
135# ensure consistent results from sort(1)
136LC_ALL=		C
137LANG=		C
138.export LANG LC_ALL
139
140# the tests are actually done with sub-makes.
141.SUFFIXES: .mk .rawout .out
142.mk.rawout:
143	@echo testing ${.IMPSRC}
144	@set -eu; \
145	cd ${.OBJDIR}; \
146	env ${ENV.${.TARGET:R}} ${TEST_MAKE} -C ${.CURDIR} \
147	  ${FLAGS.${.TARGET:R}:U-k} -f ${.IMPSRC} \
148	  > ${.TARGET}.tmp 2>&1 \
149	&& status=$$? || status=$$?; \
150	echo $$status > ${.TARGET:R}.status
151	@mv ${.TARGET}.tmp ${.TARGET}
152
153# Post-process the test output so that the results can be compared.
154#
155# always pretend .MAKE was called 'make'
156_SED_CMDS+=	-e 's,^${TEST_MAKE:T:S,.,\\.,g}[][0-9]*:,make:,'
157_SED_CMDS+=	-e 's,${TEST_MAKE:S,.,\\.,g},make,'
158# replace anything after 'stopped in' with unit-tests
159_SED_CMDS+=	-e '/stopped/s, /.*, unit-tests,'
160# strip ${.CURDIR}/ from the output
161_SED_CMDS+=	-e 's,${.CURDIR:S,.,\\.,g}/,,g'
162_SED_CMDS+=	-e 's,${UNIT_TESTS:S,.,\\.,g}/,,g'
163
164.rawout.out:
165	@echo postprocess ${.TARGET}
166	@${TOOL_SED} ${_SED_CMDS} ${SED_CMDS.${.TARGET:R}} \
167	  < ${.IMPSRC} > ${.TARGET}.tmp1
168	@${POSTPROC.${.TARGET:R}:Ucat} < ${.TARGET}.tmp1 > ${.TARGET}.tmp2
169	@rm ${.TARGET}.tmp1
170	@echo "exit status `cat ${.TARGET:R}.status`" >> ${.TARGET}.tmp2
171	@mv ${.TARGET}.tmp2 ${.TARGET}
172
173# Compare all output files
174test:	${OUTFILES} .PHONY
175	@failed= ; \
176	for test in ${TESTS}; do \
177	  diff -u ${UNIT_TESTS}/$${test}.exp $${test}.out \
178	  || failed="$${failed}$${failed:+ }$${test}" ; \
179	done ; \
180	if [ -n "$${failed}" ]; then \
181	  echo "Failed tests: $${failed}" ; false ; \
182	else \
183	  echo "All tests passed" ; \
184	fi
185
186accept:
187	@for test in ${TESTS}; do \
188	  cmp -s ${UNIT_TESTS}/$${test}.exp $${test}.out \
189	  || { echo "Replacing $${test}.exp" ; \
190	       cp $${test}.out ${UNIT_TESTS}/$${test}.exp ; } \
191	done
192
193SYNC_MI_AWK= \
194	BEGIN {								\
195	  testsdir = "usr.bin/make/unit-tests";				\
196	  linestart = "./usr/tests/" testsdir;				\
197	  fmt = linestart "/%s\ttests-usr.bin-tests\tcompattestfile,atf\\n"; \
198	  cmd = "cd " testsdir " && ls *.exp *.mk | xargs printf '" fmt "'" \
199	}								\
200	function startswith(s, prefix) {				\
201	  return substr(s, 1, length(prefix)) == prefix;		\
202	}								\
203	startswith($$1, linestart) && $$1 ~ /\.(exp|mk)$$/ { next }	\
204	{ print $$0 }							\
205	$$1 == linestart "/Makefile" { system(cmd) }
206
207sync-mi:
208	@set -eu;							\
209	cd "${MAKEFILE:tA:H}/../../..";					\
210	mi="distrib/sets/lists/tests/mi";				\
211	awk ${SYNC_MI_AWK:Q} < "$$mi" > "$$mi.$@";			\
212	mv -f "$$mi.$@" "$$mi";						\
213	cvs diff "$$mi" || true
214
215.if exists(${TEST_MAKE})
216${TESTS:=.rawout}: ${TEST_MAKE}
217.endif
218
219.-include <bsd.obj.mk>
220