xref: /src/usr.bin/make/unit-tests/varmod.mk

# $NetBSD: varmod.mk,v 1.22 2025/01/11 20:54:46 rillig Exp $
#
# Tests for variable modifiers, such as :Q, :S,from,to or :Ufallback.
#
# See also:
#	varparse-errors.mk

# As of 2024-06-05, the possible behaviors during parsing are:
#
# * `strict`: the parsing style used by most modifiers:
#   * either uses `ParseModifierPart` or parses the modifier literal
#   * other modifiers may follow, separated by a ':'
#
# * `greedy`: calls `ParseModifierPart` with `ch->endc`; this means
#   that no further modifiers are parsed in that expression.
#
# * `no-colon`: after parsing this modifier, the following modifier
#   does not need to be separated by a colon.
#   Omitting this colon is bad style.
#
# * `individual`: parsing this modifier does not follow the common
#   pattern of calling `ParseModifierPart`.
#
# The SysV column says whether a parse error in the modifier falls back
# trying the `:from=to` System V modifier.
#
# | **Operator** | **Behavior** | **Remarks**        | **SysV** |
# |--------------|--------------|--------------------|----------|
# | `!`          | no-colon     |                    | no       |
# | `:=`         | greedy       |                    | yes      |
# | `?:`         | greedy       |                    | no       |
# | `@`          | no-colon     |                    | no       |
# | `C`          | no-colon     |                    | no       |
# | `D`          | individual   | custom parser      | N/A      |
# | `E`          | strict       |                    | yes      |
# | `H`          | strict       |                    | yes      |
# | `L`          | no-colon     |                    | N/A      |
# | `M`          | individual   | custom parser      | N/A      |
# | `N`          | individual   | custom parser      | N/A      |
# | `O`          | strict       | only literal value | no       |
# | `P`          | no-colon     |                    | N/A      |
# | `Q`          | strict       |                    | yes      |
# | `R`          | strict       |                    | yes      |
# | `S`          | no-colon     |                    | N/A      |
# | `T`          | strict       |                    | N/A      |
# | `U`          | individual   | custom parser      | N/A      |
# | `[`          | strict       |                    | no       |
# | `_`          | individual   | strcspn            | yes      |
# | `gmtime`     | strict       |                    | yes      |
# | `hash`       | strict       |                    | N/A      |
# | `localtime`  | strict       |                    | yes      |
# | `q`          | strict       |                    | yes      |
# | `range`      | strict       |                    | N/A      |
# | `sh`         | strict       |                    | N/A      |
# | `t`          | strict       |                    | no       |
# | `u`          | strict       |                    | yes      |
# | `from=to`    | greedy       | SysV, fallback     | N/A      |

# These tests assume
.MAKE.SAVE_DOLLARS = yes

DOLLAR1=	$$
DOLLAR2=	${:U\$}

# To get a single '$' sign in the value of an expression, it has to
# be written as '$$' in a literal variable value.
#
# See Var_Parse, where it calls Var_Subst.
.if ${DOLLAR1} != "\$"
.  error
.endif

# Another way to get a single '$' sign is to use the :U modifier.  In the
# argument of that modifier, a '$' is escaped using the backslash instead.
#
# See Var_Parse, where it calls Var_Subst.
.if ${DOLLAR2} != "\$"
.  error
.endif

# It is also possible to use the :U modifier directly in the expression.
#
# See Var_Parse, where it calls Var_Subst.
.if ${:U\$} != "\$"
.  error
.endif

# XXX: As of 2020-09-13, it is not possible to use '$$' in a variable name
# to mean a single '$'.  This contradicts the manual page, which says that
# '$' can be escaped as '$$'.
.if ${$$:L} != ""
.  error
.endif

# In lint mode, make prints helpful error messages.
# For compatibility, make does not print these error messages in normal mode.
# Should it?
.MAKEFLAGS: -dL
# expect+2: To escape a dollar, use \$, not $$, at "$$:L} != """
# expect+1: Invalid variable name ':', at "$:L} != """
.if ${$$:L} != ""
.  error
.endif

# A '$' followed by nothing is an error as well.
# expect+1: Dollar followed by nothing
.if ${:Uword:@word@${word}$@} != "word"
.  error
.endif

# The variable modifier :P does not fall back to the SysV modifier.
# Therefore the modifier :P=RE generates a parse error.
# XXX: The .error should not be reached since the expression is
# malformed, and this error should be propagated up to Cond_EvalLine.
VAR=	STOP
# expect+1: Missing delimiter ':' after modifier "P"
.if ${VAR:P=RE} != "STORE"
# expect+1: Missing argument for ".error"
.  error
.endif

# Test the word selection modifier ':[n]' with a very large number that is
# larger than ULONG_MAX for any supported platform.
# expect+1: Bad modifier ":[99333000222000111000]"
.if ${word:L:[99333000222000111000]}
.endif
# expect+1: Bad modifier ":[2147483648]"
.if ${word:L:[2147483648]}
.endif

# Test the range generation modifier ':range=n' with a very large number that
# is larger than SIZE_MAX for any supported platform.
# expect+1: Invalid number "99333000222000111000}" for ':range' modifier
.if ${word:L:range=99333000222000111000}
.endif

# In an indirect modifier, the delimiter is '\0', which at the same time marks
# the end of the string.  The sequence '\\' '\0' is not an escaped delimiter,
# as it would be wrong to skip past the end of the string.
# expect+1: Invalid time value "\"
.if ${:${:Ugmtime=\\}}
.  error
.endif

# Test a '$' at the end of a modifier part, for all modifiers in the order
# listed in ApplyModifier.
#
# The only modifier parts where an unescaped '$' makes sense at the end are
# the 'from' parts of the ':S' and ':C' modifiers.  In all other modifier
# parts, an unescaped '$' is an undocumented and discouraged edge case, as it
# means the same as an escaped '$'.
.if ${:U:!printf '%s\n' $!} != "\$"
.  error
.endif
# expect+1: Dollar followed by nothing
.if ${VAR::=value$} != "" || ${VAR} != "value"
.  error
.endif
${:U }=		<space>
# expect+2: Dollar followed by nothing
# expect+1: Dollar followed by nothing
.if ${VAR::+=appended$} != "" || ${VAR} != "value<space>appended"
.  error
.endif
.if ${1:?then$:else$} != "then\$"
.  error
.endif
.if ${0:?then$:else$} != "else\$"
.  error
.endif
# expect+1: Dollar followed by nothing
.if ${word:L:@w@$w$@} != "word"
.  error
.endif
# expect+1: Bad modifier ":[$]"
.if ${word:[$]}
.  error
.else
.  error
.endif
VAR_DOLLAR=	VAR$$
.if ${word:L:_=VAR$} != "word" || ${${VAR_DOLLAR}} != "word"
.  error
.endif
.if ${word:L:C,d$,m,} != "worm"
.  error
.endif
.if ${word:L:C,d,$,} != "wor\$"
.  error
.endif
# expect+2: Dollar followed by nothing
# expect+1: Invalid variable name '}', at "$} != "set""
.if ${VAR:Dset$} != "set"
.  error
.endif
# expect+1: Invalid variable name '}', at "$} != "fallback""
.if ${:Ufallback$} != "fallback"
.  error
.endif
# expect+1: Invalid time value "1000$"
.if ${%y:L:gmtime=1000$}
.  error
.else
.  error
.endif
# expect+1: Invalid time value "1000$"
.if ${%y:L:localtime=1000$}
.  error
.else
.  error
.endif
# expect+1: Dollar followed by nothing
.if ${word:L:Mw*$} != "word"
.  error
.endif
# expect+1: Dollar followed by nothing
.if ${word:L:NX*$} != "word"
.  error
.endif
# expect+1: Invalid argument 'fallback$' for modifier ':mtime'
.if ${.:L:mtime=fallback$}
.  error
.else
.  error
.endif
.if ${word:L:S,d$,m,} != "worm"
.  error
.endif
.if ${word:L:S,d,m$,} != "worm\$"
.  error
.endif