newsyslog.c revision 1.43 1 1.43 wiz /* $NetBSD: newsyslog.c,v 1.43 2002/02/11 10:57:58 wiz Exp $ */
2 1.22 ad
3 1.22 ad /*
4 1.22 ad * Copyright (c) 1999, 2000 Andrew Doran <ad (at) NetBSD.org>
5 1.22 ad * All rights reserved.
6 1.22 ad *
7 1.22 ad * Redistribution and use in source and binary forms, with or without
8 1.22 ad * modification, are permitted provided that the following conditions
9 1.22 ad * are met:
10 1.22 ad * 1. Redistributions of source code must retain the above copyright
11 1.22 ad * notice, this list of conditions and the following disclaimer.
12 1.22 ad * 2. Redistributions in binary form must reproduce the above copyright
13 1.22 ad * notice, this list of conditions and the following disclaimer in the
14 1.22 ad * documentation and/or other materials provided with the distribution.
15 1.22 ad *
16 1.22 ad * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17 1.22 ad * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18 1.22 ad * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19 1.22 ad * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
20 1.22 ad * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21 1.22 ad * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22 1.22 ad * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23 1.22 ad * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24 1.22 ad * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25 1.22 ad * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26 1.22 ad * SUCH DAMAGE.
27 1.22 ad *
28 1.22 ad */
29 1.12 thorpej
30 1.1 cgd /*
31 1.1 cgd * This file contains changes from the Open Software Foundation.
32 1.1 cgd */
33 1.1 cgd
34 1.1 cgd /*
35 1.22 ad * Copyright 1988, 1989 by the Massachusetts Institute of Technology
36 1.22 ad *
37 1.22 ad * Permission to use, copy, modify, and distribute this software
38 1.22 ad * and its documentation for any purpose and without fee is
39 1.22 ad * hereby granted, provided that the above copyright notice
40 1.22 ad * appear in all copies and that both that copyright notice and
41 1.22 ad * this permission notice appear in supporting documentation,
42 1.22 ad * and that the names of M.I.T. and the M.I.T. S.I.P.B. not be
43 1.22 ad * used in advertising or publicity pertaining to distribution
44 1.22 ad * of the software without specific, written prior permission.
45 1.22 ad * M.I.T. and the M.I.T. S.I.P.B. make no representations about
46 1.22 ad * the suitability of this software for any purpose. It is
47 1.22 ad * provided "as is" without express or implied warranty.
48 1.22 ad *
49 1.22 ad */
50 1.1 cgd
51 1.1 cgd /*
52 1.32 ad * newsyslog(8) - a program to roll over log files provided that specified
53 1.22 ad * critera are met, optionally preserving a number of historical log files.
54 1.1 cgd */
55 1.1 cgd
56 1.13 lukem #include <sys/cdefs.h>
57 1.5 mycroft #ifndef lint
58 1.43 wiz __RCSID("$NetBSD: newsyslog.c,v 1.43 2002/02/11 10:57:58 wiz Exp $");
59 1.5 mycroft #endif /* not lint */
60 1.1 cgd
61 1.1 cgd #include <sys/types.h>
62 1.1 cgd #include <sys/time.h>
63 1.1 cgd #include <sys/stat.h>
64 1.1 cgd #include <sys/param.h>
65 1.36 tron #include <sys/wait.h>
66 1.1 cgd
67 1.13 lukem #include <ctype.h>
68 1.13 lukem #include <fcntl.h>
69 1.13 lukem #include <grp.h>
70 1.13 lukem #include <pwd.h>
71 1.13 lukem #include <signal.h>
72 1.13 lukem #include <stdio.h>
73 1.13 lukem #include <stdlib.h>
74 1.22 ad #include <stdarg.h>
75 1.13 lukem #include <string.h>
76 1.14 kleink #include <time.h>
77 1.13 lukem #include <unistd.h>
78 1.22 ad #include <errno.h>
79 1.22 ad #include <err.h>
80 1.22 ad #include <util.h>
81 1.31 ad #include <paths.h>
82 1.22 ad
83 1.22 ad #include "pathnames.h"
84 1.22 ad
85 1.28 ad #define PRHDRINFO(x) ((void)(verbose ? printf x : 0))
86 1.28 ad #define PRINFO(x) ((void)(verbose ? printf(" ") + printf x : 0))
87 1.22 ad
88 1.43 wiz #define CE_COMPRESS 0x01 /* Compress the archived log files */
89 1.29 ad #define CE_BINARY 0x02 /* Logfile is a binary file/non-syslog */
90 1.29 ad #define CE_NOSIGNAL 0x04 /* Don't send a signal when trimmed */
91 1.32 ad #define CE_CREATE 0x08 /* Create log file if none exists */
92 1.32 ad #define CE_PLAIN0 0x10 /* Do not compress zero'th history file */
93 1.13 lukem
94 1.1 cgd struct conf_entry {
95 1.22 ad uid_t uid; /* Owner of log */
96 1.22 ad gid_t gid; /* Group of log */
97 1.22 ad mode_t mode; /* File permissions */
98 1.22 ad int numhist; /* Number of historical logs to keep */
99 1.22 ad size_t maxsize; /* Maximum log size */
100 1.22 ad int maxage; /* Hours between log trimming */
101 1.32 ad time_t trimat; /* Specific trim time */
102 1.22 ad int flags; /* Flags (CE_*) */
103 1.22 ad int signum; /* Signal to send */
104 1.22 ad char pidfile[MAXPATHLEN]; /* File containing PID to signal */
105 1.22 ad char logfile[MAXPATHLEN]; /* Path to log file */
106 1.1 cgd };
107 1.1 cgd
108 1.38 ad int verbose; /* Be verbose */
109 1.38 ad int noaction; /* Take no action */
110 1.38 ad int nosignal; /* Do not send signals */
111 1.25 ad char hostname[MAXHOSTNAMELEN + 1]; /* Hostname, stripped of domain */
112 1.32 ad uid_t myeuid; /* EUID we are running with */
113 1.1 cgd
114 1.32 ad int getsig(const char *);
115 1.32 ad int isnumber(const char *);
116 1.22 ad int main(int, char **);
117 1.32 ad int parse_cfgline(struct conf_entry *, FILE *, size_t *);
118 1.32 ad time_t parse_iso8601(char *);
119 1.32 ad time_t parse_dwm(char *);
120 1.32 ad int parse_userspec(const char *, struct passwd **, struct group **);
121 1.32 ad pid_t readpidfile(const char *);
122 1.32 ad void usage(void);
123 1.22 ad
124 1.29 ad void log_compress(struct conf_entry *, const char *);
125 1.22 ad void log_create(struct conf_entry *);
126 1.22 ad void log_examine(struct conf_entry *, int);
127 1.22 ad void log_trim(struct conf_entry *);
128 1.22 ad void log_trimmed(struct conf_entry *);
129 1.22 ad
130 1.22 ad /*
131 1.22 ad * Program entry point.
132 1.22 ad */
133 1.13 lukem int
134 1.22 ad main(int argc, char **argv)
135 1.1 cgd {
136 1.29 ad struct conf_entry log;
137 1.22 ad FILE *fd;
138 1.22 ad char *p, *cfile;
139 1.32 ad int c, needroot, i, force;
140 1.22 ad size_t lineno;
141 1.39 ad
142 1.22 ad force = 0;
143 1.22 ad needroot = 1;
144 1.22 ad cfile = _PATH_NEWSYSLOGCONF;
145 1.1 cgd
146 1.32 ad gethostname(hostname, sizeof (hostname));
147 1.32 ad hostname[sizeof (hostname) - 1] = '\0';
148 1.8 jtc
149 1.32 ad /* Truncate domain. */
150 1.22 ad if ((p = strchr(hostname, '.')) != NULL)
151 1.8 jtc *p = '\0';
152 1.22 ad
153 1.32 ad /* Parse command line options. */
154 1.38 ad while ((c = getopt(argc, argv, "f:nrsvF")) != -1) {
155 1.22 ad switch (c) {
156 1.28 ad case 'f':
157 1.28 ad cfile = optarg;
158 1.28 ad break;
159 1.28 ad case 'n':
160 1.28 ad noaction = 1;
161 1.29 ad verbose = 1;
162 1.28 ad break;
163 1.22 ad case 'r':
164 1.22 ad needroot = 0;
165 1.22 ad break;
166 1.38 ad case 's':
167 1.38 ad nosignal = 1;
168 1.38 ad break;
169 1.22 ad case 'v':
170 1.22 ad verbose = 1;
171 1.22 ad break;
172 1.22 ad case 'F':
173 1.22 ad force = 1;
174 1.22 ad break;
175 1.22 ad default:
176 1.22 ad usage();
177 1.28 ad /* NOTREACHED */
178 1.22 ad }
179 1.8 jtc }
180 1.1 cgd
181 1.32 ad myeuid = geteuid();
182 1.32 ad if (needroot && myeuid != 0)
183 1.22 ad errx(EXIT_FAILURE, "must be run as root");
184 1.22 ad
185 1.32 ad argc -= optind;
186 1.32 ad argv += optind;
187 1.32 ad
188 1.22 ad if (strcmp(cfile, "-") == 0)
189 1.22 ad fd = stdin;
190 1.22 ad else if ((fd = fopen(cfile, "rt")) == NULL)
191 1.22 ad err(EXIT_FAILURE, "%s", cfile);
192 1.32 ad
193 1.32 ad for (lineno = 0; !parse_cfgline(&log, fd, &lineno);) {
194 1.32 ad /*
195 1.32 ad * If specific log files were specified, touch only
196 1.32 ad * those.
197 1.32 ad */
198 1.32 ad if (argc != 0) {
199 1.32 ad for (i = 0; i < argc; i++)
200 1.32 ad if (strcmp(log.logfile, argv[i]) == 0)
201 1.32 ad break;
202 1.32 ad if (i == argc)
203 1.32 ad continue;
204 1.32 ad }
205 1.29 ad log_examine(&log, force);
206 1.32 ad }
207 1.22 ad
208 1.22 ad if (fd != stdin)
209 1.22 ad fclose(fd);
210 1.1 cgd
211 1.22 ad exit(EXIT_SUCCESS);
212 1.22 ad /* NOTREACHED */
213 1.1 cgd }
214 1.1 cgd
215 1.22 ad /*
216 1.22 ad * Parse a single line from the configuration file.
217 1.1 cgd */
218 1.22 ad int
219 1.32 ad parse_cfgline(struct conf_entry *log, FILE *fd, size_t *_lineno)
220 1.1 cgd {
221 1.22 ad char *line, *q, **ap, *argv[10];
222 1.22 ad struct passwd *pw;
223 1.22 ad struct group *gr;
224 1.33 enami int nf, lineno, i, rv;
225 1.33 enami
226 1.33 enami rv = -1;
227 1.33 enami line = NULL;
228 1.30 ad
229 1.32 ad /* Place the white-space separated fields into an array. */
230 1.33 enami do {
231 1.33 enami if (line != NULL)
232 1.33 enami free(line);
233 1.33 enami if ((line = fparseln(fd, NULL, _lineno, NULL, 0)) == NULL)
234 1.33 enami return (rv);
235 1.33 enami lineno = (int)*_lineno;
236 1.33 enami
237 1.33 enami for (ap = argv, nf = 0; (*ap = strsep(&line, " \t")) != NULL;)
238 1.33 enami if (**ap != '\0') {
239 1.33 enami if (++nf == sizeof (argv) / sizeof (argv[0])) {
240 1.33 enami warnx("config line %d: "
241 1.33 enami "too many fields", lineno);
242 1.33 enami goto bad;
243 1.33 enami }
244 1.33 enami ap++;
245 1.22 ad }
246 1.33 enami } while (nf == 0);
247 1.22 ad
248 1.22 ad if (nf < 6)
249 1.22 ad errx(EXIT_FAILURE, "config line %d: too few fields", lineno);
250 1.22 ad
251 1.33 enami memset(log, 0, sizeof (*log));
252 1.33 enami
253 1.32 ad /* logfile_name */
254 1.22 ad ap = argv;
255 1.32 ad strlcpy(log->logfile, *ap++, sizeof (log->logfile));
256 1.32 ad if (log->logfile[0] != '/')
257 1.32 ad errx(EXIT_FAILURE,
258 1.32 ad "config line %d: logfile must have a full path", lineno);
259 1.21 ad
260 1.32 ad /* owner:group */
261 1.31 ad if (strchr(*ap, ':') != NULL || strchr(*ap, '.') != NULL) {
262 1.32 ad if (parse_userspec(*ap++, &pw, &gr)) {
263 1.22 ad warnx("config line %d: unknown user/group", lineno);
264 1.33 enami goto bad;
265 1.22 ad }
266 1.32 ad
267 1.32 ad /*
268 1.35 ad * We may only change the file's owner as non-root.
269 1.32 ad */
270 1.32 ad if (myeuid != 0) {
271 1.32 ad if (pw->pw_uid != myeuid)
272 1.32 ad errx(EXIT_FAILURE, "config line %d: user:group "
273 1.32 ad "as non-root must match current user",
274 1.32 ad lineno);
275 1.32 ad log->uid = (uid_t)-1;
276 1.32 ad } else
277 1.32 ad log->uid = pw->pw_uid;
278 1.22 ad log->gid = gr->gr_gid;
279 1.22 ad if (nf < 7)
280 1.22 ad errx(EXIT_FAILURE, "config line %d: too few fields",
281 1.22 ad lineno);
282 1.32 ad } else if (myeuid != 0) {
283 1.32 ad log->uid = (uid_t)-1;
284 1.32 ad log->gid = getegid();
285 1.22 ad }
286 1.22 ad
287 1.32 ad /* mode */
288 1.22 ad if (sscanf(*ap++, "%o", &i) != 1) {
289 1.22 ad warnx("config line %d: bad permissions", lineno);
290 1.33 enami goto bad;
291 1.22 ad }
292 1.22 ad log->mode = (mode_t)i;
293 1.22 ad
294 1.32 ad /* count */
295 1.26 aymeric if (sscanf(*ap++, "%d", &log->numhist) != 1) {
296 1.22 ad warnx("config line %d: bad log count", lineno);
297 1.33 enami goto bad;
298 1.22 ad }
299 1.22 ad
300 1.32 ad /* size */
301 1.32 ad if (isdigit(**ap)) {
302 1.32 ad log->maxsize = (int)strtol(*ap, &q, 0);
303 1.32 ad if (*q != '\0') {
304 1.32 ad warnx("config line %d: bad log size", lineno);
305 1.33 enami goto bad;
306 1.32 ad }
307 1.32 ad } else if (**ap == '*')
308 1.22 ad log->maxsize = (size_t)-1;
309 1.22 ad else {
310 1.22 ad warnx("config line %d: bad log size", lineno);
311 1.33 enami goto bad;
312 1.22 ad }
313 1.22 ad ap++;
314 1.32 ad
315 1.32 ad /* when */
316 1.32 ad log->maxage = -1;
317 1.32 ad log->trimat = (time_t)-1;
318 1.32 ad q = *ap++;
319 1.32 ad
320 1.32 ad if (strcmp(q, "*") != 0) {
321 1.32 ad if (isdigit(*q))
322 1.32 ad log->maxage = (int)strtol(q, &q, 10);
323 1.32 ad
324 1.32 ad /*
325 1.32 ad * One class of periodic interval specification can follow a
326 1.32 ad * maximum age specification. Handle it.
327 1.32 ad */
328 1.32 ad if (*q == '@') {
329 1.32 ad log->trimat = parse_iso8601(q + 1);
330 1.32 ad if (log->trimat == (time_t)-1) {
331 1.32 ad warnx("config line %d: bad trim time", lineno);
332 1.33 enami goto bad;
333 1.32 ad }
334 1.32 ad } else if (*q == '$') {
335 1.32 ad if ((log->trimat = parse_dwm(q + 1)) == (time_t)-1) {
336 1.32 ad warnx("config line %d: bad trim time", lineno);
337 1.33 enami goto bad;
338 1.32 ad }
339 1.32 ad } else if (log->maxage == -1) {
340 1.32 ad warnx("config line %d: bad log age", lineno);
341 1.33 enami goto bad;
342 1.32 ad }
343 1.22 ad }
344 1.32 ad
345 1.32 ad /* flags */
346 1.42 ad log->flags = (nosignal ? CE_NOSIGNAL : 0);
347 1.42 ad
348 1.28 ad for (q = *ap++; q != NULL && *q != '\0'; q++) {
349 1.22 ad switch (tolower(*q)) {
350 1.22 ad case 'b':
351 1.22 ad log->flags |= CE_BINARY;
352 1.22 ad break;
353 1.22 ad case 'c':
354 1.22 ad log->flags |= CE_CREATE;
355 1.22 ad break;
356 1.22 ad case 'n':
357 1.22 ad log->flags |= CE_NOSIGNAL;
358 1.22 ad break;
359 1.29 ad case 'p':
360 1.29 ad log->flags |= CE_PLAIN0;
361 1.29 ad break;
362 1.22 ad case 'z':
363 1.29 ad log->flags |= CE_COMPRESS;
364 1.22 ad break;
365 1.22 ad case '-':
366 1.22 ad break;
367 1.22 ad default:
368 1.22 ad warnx("config line %d: bad flags", lineno);
369 1.33 enami goto bad;
370 1.22 ad }
371 1.22 ad }
372 1.1 cgd
373 1.32 ad /* path_to_pidfile */
374 1.22 ad if (*ap != NULL && **ap == '/')
375 1.32 ad strlcpy(log->pidfile, *ap++, sizeof (log->pidfile));
376 1.22 ad else
377 1.22 ad log->pidfile[0] = '\0';
378 1.22 ad
379 1.32 ad /* sigtype */
380 1.40 ad if (*ap != NULL) {
381 1.40 ad if ((log->signum = getsig(*ap++)) < 0) {
382 1.40 ad warnx("config line %d: bad signal type", lineno);
383 1.40 ad goto bad;
384 1.40 ad }
385 1.22 ad } else
386 1.22 ad log->signum = SIGHUP;
387 1.33 enami
388 1.33 enami rv = 0;
389 1.33 enami
390 1.33 enami bad:
391 1.33 enami free(line);
392 1.33 enami return (rv);
393 1.1 cgd }
394 1.1 cgd
395 1.22 ad /*
396 1.22 ad * Examine a log file. If the trim conditions are met, call log_trim() to
397 1.22 ad * trim the log file.
398 1.22 ad */
399 1.13 lukem void
400 1.29 ad log_examine(struct conf_entry *log, int force)
401 1.22 ad {
402 1.22 ad struct stat sb;
403 1.22 ad size_t size;
404 1.32 ad int age, trim;
405 1.34 ad char tmp[MAXPATHLEN];
406 1.34 ad const char *reason;
407 1.22 ad time_t now;
408 1.28 ad
409 1.32 ad now = time(NULL);
410 1.32 ad
411 1.29 ad PRHDRINFO(("\n%s <%d%s>: ", log->logfile, log->numhist,
412 1.29 ad (log->flags & CE_COMPRESS) != 0 ? "Z" : ""));
413 1.28 ad
414 1.32 ad /*
415 1.32 ad * stat() the logfile. If it doesn't exist and the `c' flag has
416 1.32 ad * been specified, create it. If it doesn't exist and the `c' flag
417 1.32 ad * hasn't been specified, give up.
418 1.32 ad */
419 1.29 ad if (stat(log->logfile, &sb) < 0) {
420 1.29 ad if (errno == ENOENT && (log->flags & CE_CREATE) != 0) {
421 1.28 ad PRHDRINFO(("creating; "));
422 1.28 ad if (!noaction)
423 1.29 ad log_create(log);
424 1.28 ad else {
425 1.28 ad PRHDRINFO(("can't proceed with `-n'\n"));
426 1.28 ad return;
427 1.28 ad }
428 1.29 ad if (stat(log->logfile, &sb))
429 1.29 ad err(EXIT_FAILURE, "%s", log->logfile);
430 1.28 ad } else if (errno == ENOENT) {
431 1.28 ad PRHDRINFO(("does not exist --> skip log\n"));
432 1.22 ad return;
433 1.28 ad } else if (errno != 0)
434 1.29 ad err(EXIT_FAILURE, "%s", log->logfile);
435 1.22 ad }
436 1.22 ad
437 1.32 ad /* Size of the log file in kB. */
438 1.22 ad size = ((size_t)sb.st_blocks * S_BLKSIZE) >> 10;
439 1.20 ad
440 1.32 ad /*
441 1.32 ad * Get the age (expressed in hours) of the current log file with
442 1.32 ad * respect to the newest historical log file.
443 1.32 ad */
444 1.32 ad strlcpy(tmp, log->logfile, sizeof (tmp));
445 1.32 ad strlcat(tmp, ".0", sizeof (tmp));
446 1.22 ad if (stat(tmp, &sb) < 0) {
447 1.32 ad strlcat(tmp, ".gz", sizeof (tmp));
448 1.22 ad if (stat(tmp, &sb) < 0)
449 1.28 ad age = -1;
450 1.11 thorpej else
451 1.28 ad age = (int)(now - sb.st_mtime + 1800) / 3600;
452 1.17 christos } else
453 1.28 ad age = (int)(now - sb.st_mtime + 1800) / 3600;
454 1.11 thorpej
455 1.22 ad /*
456 1.32 ad * Examine the set of given trim conditions and if any one is met,
457 1.32 ad * trim the log.
458 1.32 ad *
459 1.32 ad * Note: if `maxage' or `trimat' is used as a trim condition, we
460 1.32 ad * need at least one historical log file to determine the `age' of
461 1.32 ad * the active log file. WRT `trimat', we will trim up to one hour
462 1.32 ad * after the specific trim time has passed - we need to know if
463 1.32 ad * we've trimmed to meet that condition with a previous invocation
464 1.32 ad * of newsyslog(8).
465 1.22 ad */
466 1.32 ad if (log->maxage >= 0 && (age >= log->maxage || age < 0)) {
467 1.32 ad trim = 1;
468 1.32 ad reason = "log age > interval";
469 1.32 ad } else if (size >= log->maxsize) {
470 1.32 ad trim = 1;
471 1.32 ad reason = "log size > size";
472 1.32 ad } else if (log->trimat != (time_t)-1 && now >= log->trimat &&
473 1.39 ad (age == -1 || age > 1) &&
474 1.39 ad difftime(now, log->trimat) < 60 * 60) {
475 1.32 ad trim = 1;
476 1.32 ad reason = "specific trim time";
477 1.32 ad } else {
478 1.32 ad trim = force;
479 1.32 ad reason = "trim forced";
480 1.32 ad }
481 1.32 ad
482 1.32 ad if (trim) {
483 1.32 ad PRHDRINFO(("--> trim log (%s)\n", reason));
484 1.29 ad log_trim(log);
485 1.22 ad } else
486 1.32 ad PRHDRINFO(("--> skip log (trim conditions not met)\n"));
487 1.1 cgd }
488 1.1 cgd
489 1.22 ad /*
490 1.22 ad * Trim the specified log file.
491 1.22 ad */
492 1.22 ad void
493 1.22 ad log_trim(struct conf_entry *log)
494 1.1 cgd {
495 1.22 ad char file1[MAXPATHLEN], file2[MAXPATHLEN];
496 1.22 ad int i;
497 1.22 ad struct stat st;
498 1.22 ad pid_t pid;
499 1.22 ad
500 1.32 ad /* Remove oldest historical log. */
501 1.35 ad snprintf(file1, sizeof (file1), "%s.%d", log->logfile,
502 1.35 ad log->numhist - 1);
503 1.22 ad
504 1.22 ad PRINFO(("rm -f %s\n", file1));
505 1.28 ad if (!noaction)
506 1.28 ad unlink(file1);
507 1.32 ad strlcat(file1, ".gz", sizeof (file1));
508 1.29 ad PRINFO(("rm -f %s\n", file1));
509 1.28 ad if (!noaction)
510 1.29 ad unlink(file1);
511 1.22 ad
512 1.32 ad /* Move down log files. */
513 1.22 ad for (i = log->numhist - 1; i != 0; i--) {
514 1.32 ad snprintf(file1, sizeof (file1), "%s.%d", log->logfile, i - 1);
515 1.32 ad snprintf(file2, sizeof (file2), "%s.%d", log->logfile, i);
516 1.22 ad
517 1.22 ad if (lstat(file1, &st) != 0) {
518 1.32 ad strlcat(file1, ".gz", sizeof (file1));
519 1.32 ad strlcat(file2, ".gz", sizeof (file2));
520 1.29 ad if (lstat(file1, &st) != 0)
521 1.22 ad continue;
522 1.22 ad }
523 1.22 ad
524 1.29 ad PRINFO(("mv %s %s\n", file1, file2));
525 1.28 ad if (!noaction)
526 1.29 ad if (rename(file1, file2))
527 1.29 ad err(EXIT_FAILURE, "%s", file1);
528 1.29 ad PRINFO(("chmod %o %s\n", log->mode, file2));
529 1.28 ad if (!noaction)
530 1.29 ad if (chmod(file2, log->mode))
531 1.29 ad err(EXIT_FAILURE, "%s", file2);
532 1.32 ad PRINFO(("chown %d:%d %s\n", log->uid, log->gid,
533 1.32 ad file2));
534 1.28 ad if (!noaction)
535 1.29 ad if (chown(file2, log->uid, log->gid))
536 1.32 ad err(EXIT_FAILURE, "%s", file2);
537 1.29 ad }
538 1.29 ad
539 1.29 ad /*
540 1.29 ad * If a historical log file isn't compressed, and 'z' has been
541 1.29 ad * specified, compress it. (This is convenient, but is also needed
542 1.29 ad * if 'p' has been specified.) It should be noted that gzip(1)
543 1.29 ad * preserves file ownership and file mode.
544 1.29 ad */
545 1.29 ad for (i = (log->flags & CE_PLAIN0) != 0; i < log->numhist; i++) {
546 1.32 ad snprintf(file1, sizeof (file1), "%s.%d", log->logfile, i);
547 1.29 ad if (lstat(file1, &st) != 0)
548 1.29 ad continue;
549 1.32 ad snprintf(file2, sizeof (file2), "%s.gz", file1);
550 1.29 ad if (lstat(file2, &st) == 0)
551 1.29 ad continue;
552 1.29 ad log_compress(log, file1);
553 1.22 ad }
554 1.22 ad
555 1.28 ad log_trimmed(log);
556 1.22 ad
557 1.32 ad /* Create the historical log file if we're maintaining history. */
558 1.22 ad if (log->numhist == 0) {
559 1.28 ad PRINFO(("rm -f %s\n", log->logfile));
560 1.28 ad if (!noaction)
561 1.28 ad if (unlink(log->logfile))
562 1.28 ad err(EXIT_FAILURE, "%s", log->logfile);
563 1.22 ad } else {
564 1.32 ad snprintf(file1, sizeof (file1), "%s.0", log->logfile);
565 1.28 ad PRINFO(("mv %s %s\n", log->logfile, file1));
566 1.28 ad if (!noaction)
567 1.28 ad if (rename(log->logfile, file1))
568 1.28 ad err(EXIT_FAILURE, "%s", log->logfile);
569 1.22 ad }
570 1.22 ad
571 1.29 ad PRINFO(("(create new log)\n"));
572 1.22 ad log_create(log);
573 1.28 ad log_trimmed(log);
574 1.22 ad
575 1.32 ad /* Set the correct permissions on the log. */
576 1.22 ad PRINFO(("chmod %o %s\n", log->mode, log->logfile));
577 1.28 ad if (!noaction)
578 1.28 ad if (chmod(log->logfile, log->mode))
579 1.28 ad err(EXIT_FAILURE, "%s", log->logfile);
580 1.22 ad
581 1.32 ad /* Do we need to signal a daemon? */
582 1.42 ad if ((log->flags & CE_NOSIGNAL) == 0) {
583 1.22 ad if (log->pidfile[0] != '\0')
584 1.22 ad pid = readpidfile(log->pidfile);
585 1.22 ad else
586 1.22 ad pid = readpidfile(_PATH_SYSLOGDPID);
587 1.22 ad
588 1.22 ad if (pid != (pid_t)-1) {
589 1.32 ad PRINFO(("kill -%s %lu\n",
590 1.32 ad sys_signame[log->signum], (u_long)pid));
591 1.28 ad if (!noaction)
592 1.28 ad if (kill(pid, log->signum))
593 1.28 ad warn("kill");
594 1.22 ad }
595 1.22 ad }
596 1.29 ad
597 1.32 ad /* If the newest historical log is to be compressed, do it here. */
598 1.29 ad if ((log->flags & (CE_PLAIN0 | CE_COMPRESS)) == CE_COMPRESS) {
599 1.32 ad snprintf(file1, sizeof (file1), "%s.0", log->logfile);
600 1.42 ad if ((log->flags & CE_NOSIGNAL) == 0) {
601 1.42 ad PRINFO(("sleep for 10 seconds before compressing...\n"));
602 1.42 ad sleep(10);
603 1.42 ad }
604 1.29 ad log_compress(log, file1);
605 1.22 ad }
606 1.1 cgd }
607 1.1 cgd
608 1.22 ad /*
609 1.22 ad * Write an entry to the log file recording the fact that it was trimmed.
610 1.22 ad */
611 1.13 lukem void
612 1.22 ad log_trimmed(struct conf_entry *log)
613 1.1 cgd {
614 1.22 ad FILE *fd;
615 1.22 ad time_t now;
616 1.22 ad char *daytime;
617 1.22 ad
618 1.28 ad if ((log->flags & CE_BINARY) != 0)
619 1.28 ad return;
620 1.28 ad PRINFO(("(append rotation notice to %s)\n", log->logfile));
621 1.28 ad if (noaction)
622 1.28 ad return;
623 1.28 ad
624 1.22 ad if ((fd = fopen(log->logfile, "at")) == NULL)
625 1.22 ad err(EXIT_FAILURE, "%s", log->logfile);
626 1.22 ad
627 1.22 ad now = time(NULL);
628 1.22 ad daytime = ctime(&now) + 4;
629 1.22 ad daytime[15] = '\0';
630 1.22 ad
631 1.29 ad fprintf(fd, "%s %s newsyslog[%lu]: log file turned over\n", daytime,
632 1.29 ad hostname, (u_long)getpid());
633 1.22 ad fclose(fd);
634 1.1 cgd }
635 1.1 cgd
636 1.22 ad /*
637 1.29 ad * Create a new log file.
638 1.22 ad */
639 1.22 ad void
640 1.29 ad log_create(struct conf_entry *log)
641 1.1 cgd {
642 1.22 ad int fd;
643 1.1 cgd
644 1.28 ad if (noaction)
645 1.28 ad return;
646 1.28 ad
647 1.29 ad if ((fd = creat(log->logfile, log->mode)) < 0)
648 1.29 ad err(EXIT_FAILURE, "%s", log->logfile);
649 1.29 ad if (fchown(fd, log->uid, log->gid) < 0)
650 1.29 ad err(EXIT_FAILURE, "%s", log->logfile);
651 1.28 ad close(fd);
652 1.1 cgd }
653 1.1 cgd
654 1.22 ad /*
655 1.32 ad * Fork off gzip(1) to compress a log file. This routine takes an
656 1.32 ad * additional string argument (the name of the file to compress): it is also
657 1.32 ad * used to compress historical log files other than the newest.
658 1.29 ad */
659 1.29 ad void
660 1.29 ad log_compress(struct conf_entry *log, const char *fn)
661 1.29 ad {
662 1.32 ad char tmp[MAXPATHLEN];
663 1.29 ad
664 1.29 ad PRINFO(("gzip %s\n", fn));
665 1.29 ad if (!noaction) {
666 1.36 tron pid_t pid;
667 1.36 tron int status;
668 1.36 tron
669 1.36 tron if ((pid = vfork()) < 0)
670 1.36 tron err(EXIT_FAILURE, "vfork");
671 1.29 ad else if (pid == 0) {
672 1.29 ad execl(_PATH_GZIP, "gzip", "-f", fn, NULL);
673 1.36 tron _exit(EXIT_FAILURE);
674 1.29 ad }
675 1.36 tron while (waitpid(pid, &status, 0) != pid);
676 1.36 tron
677 1.36 tron if (!WIFEXITED(status) || (WEXITSTATUS(status) != 0))
678 1.36 tron errx(EXIT_FAILURE, "gzip failed");
679 1.29 ad }
680 1.32 ad
681 1.32 ad snprintf(tmp, sizeof (tmp), "%s.gz", fn);
682 1.32 ad PRINFO(("chown %d:%d %s\n", log->uid, log->gid, tmp));
683 1.32 ad if (!noaction)
684 1.37 tron if (chown(tmp, log->uid, log->gid))
685 1.32 ad err(EXIT_FAILURE, "%s", tmp);
686 1.29 ad }
687 1.29 ad
688 1.29 ad /*
689 1.22 ad * Display program usage information.
690 1.22 ad */
691 1.22 ad void
692 1.22 ad usage(void)
693 1.1 cgd {
694 1.1 cgd
695 1.32 ad fprintf(stderr,
696 1.38 ad "usage: newsyslog [-nrsvF] [-f config-file] [file ...]\n");
697 1.22 ad exit(EXIT_FAILURE);
698 1.1 cgd }
699 1.1 cgd
700 1.22 ad /*
701 1.22 ad * Return non-zero if a string represents a decimal value.
702 1.22 ad */
703 1.22 ad int
704 1.22 ad isnumber(const char *string)
705 1.22 ad {
706 1.1 cgd
707 1.22 ad while (isdigit(*string))
708 1.22 ad string++;
709 1.1 cgd
710 1.22 ad return (*string == '\0');
711 1.21 ad }
712 1.21 ad
713 1.22 ad /*
714 1.22 ad * Given a signal name, attempt to find the corresponding signal number.
715 1.22 ad */
716 1.21 ad int
717 1.22 ad getsig(const char *sig)
718 1.21 ad {
719 1.22 ad char *p;
720 1.21 ad int n;
721 1.21 ad
722 1.21 ad if (isnumber(sig)) {
723 1.22 ad n = (int)strtol(sig, &p, 0);
724 1.28 ad if (p != '\0' || n < 0 || n >= NSIG)
725 1.21 ad return (-1);
726 1.21 ad return (n);
727 1.21 ad }
728 1.21 ad
729 1.28 ad if (strncasecmp(sig, "SIG", 3) == 0)
730 1.21 ad sig += 3;
731 1.22 ad for (n = 1; n < NSIG; n++)
732 1.22 ad if (strcasecmp(sys_signame[n], sig) == 0)
733 1.21 ad return (n);
734 1.22 ad return (-1);
735 1.22 ad }
736 1.22 ad
737 1.22 ad /*
738 1.22 ad * Given a path to a PID file, return the PID contained within.
739 1.22 ad */
740 1.22 ad pid_t
741 1.22 ad readpidfile(const char *file)
742 1.22 ad {
743 1.22 ad FILE *fd;
744 1.22 ad char line[BUFSIZ];
745 1.22 ad pid_t pid;
746 1.22 ad
747 1.28 ad #ifdef notyet
748 1.28 ad if (file[0] != '/')
749 1.32 ad snprintf(tmp, sizeof (tmp), "%s%s", _PATH_VARRUN, file);
750 1.28 ad else
751 1.32 ad strlcpy(tmp, file, sizeof (tmp));
752 1.28 ad #endif
753 1.28 ad
754 1.25 ad if ((fd = fopen(file, "rt")) == NULL) {
755 1.25 ad warn("%s", file);
756 1.22 ad return (-1);
757 1.21 ad }
758 1.25 ad
759 1.32 ad if (fgets(line, sizeof (line) - 1, fd) != NULL) {
760 1.32 ad line[sizeof (line) - 1] = '\0';
761 1.22 ad pid = (pid_t)strtol(line, NULL, 0);
762 1.29 ad } else {
763 1.29 ad warnx("unable to read %s", file);
764 1.29 ad pid = (pid_t)-1;
765 1.22 ad }
766 1.29 ad
767 1.22 ad fclose(fd);
768 1.22 ad return (pid);
769 1.22 ad }
770 1.22 ad
771 1.22 ad /*
772 1.22 ad * Parse a user:group specification.
773 1.22 ad *
774 1.32 ad * XXX This is over the top for newsyslog(8). It should be moved to libutil.
775 1.22 ad */
776 1.22 ad int
777 1.32 ad parse_userspec(const char *name, struct passwd **pw, struct group **gr)
778 1.22 ad {
779 1.22 ad char buf[MAXLOGNAME * 2 + 2], *group;
780 1.22 ad
781 1.32 ad strlcpy(buf, name, sizeof (buf));
782 1.22 ad *gr = NULL;
783 1.22 ad
784 1.22 ad /*
785 1.22 ad * Before attempting to use '.' as a separator, see if the whole
786 1.28 ad * string resolves as a user name.
787 1.22 ad */
788 1.22 ad if ((*pw = getpwnam(buf)) != NULL) {
789 1.22 ad *gr = getgrgid((*pw)->pw_gid);
790 1.22 ad return (0);
791 1.22 ad }
792 1.22 ad
793 1.22 ad /* Split the user and group name. */
794 1.22 ad if ((group = strchr(buf, ':')) != NULL ||
795 1.22 ad (group = strchr(buf, '.')) != NULL)
796 1.22 ad *group++ = '\0';
797 1.22 ad
798 1.22 ad if (isnumber(buf))
799 1.22 ad *pw = getpwuid((uid_t)atoi(buf));
800 1.22 ad else
801 1.22 ad *pw = getpwnam(buf);
802 1.22 ad
803 1.22 ad /*
804 1.22 ad * Find the group. If a group wasn't specified, use the user's
805 1.22 ad * `natural' group. We get to this point even if no user was found.
806 1.22 ad * This is to allow the caller to get a better idea of what went
807 1.22 ad * wrong, if anything.
808 1.22 ad */
809 1.22 ad if (group == NULL || *group == '\0') {
810 1.22 ad if (*pw == NULL)
811 1.22 ad return (-1);
812 1.22 ad *gr = getgrgid((*pw)->pw_gid);
813 1.22 ad } else if (isnumber(group))
814 1.22 ad *gr = getgrgid((gid_t)atoi(group));
815 1.22 ad else
816 1.22 ad *gr = getgrnam(group);
817 1.22 ad
818 1.28 ad return (*pw != NULL && *gr != NULL ? 0 : -1);
819 1.32 ad }
820 1.32 ad
821 1.32 ad /*
822 1.32 ad * Parse a cyclic time specification, the format is as follows:
823 1.32 ad *
824 1.32 ad * [Dhh] or [Wd[Dhh]] or [Mdd[Dhh]]
825 1.32 ad *
826 1.32 ad * to rotate a log file cyclic at
827 1.32 ad *
828 1.32 ad * - every day (D) within a specific hour (hh) (hh = 0...23)
829 1.32 ad * - once a week (W) at a specific day (d) OR (d = 0..6, 0 = Sunday)
830 1.32 ad * - once a month (M) at a specific day (d) (d = 1..31,l|L)
831 1.32 ad *
832 1.32 ad * We don't accept a timezone specification; missing fields are defaulted to
833 1.32 ad * the current date but time zero.
834 1.32 ad */
835 1.32 ad time_t
836 1.32 ad parse_dwm(char *s)
837 1.32 ad {
838 1.32 ad char *t;
839 1.32 ad struct tm tm, *tmp;
840 1.32 ad u_long ul;
841 1.32 ad time_t now;
842 1.32 ad static int mtab[] = { 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
843 1.32 ad int wmseen, dseen, nd, save;
844 1.32 ad
845 1.32 ad wmseen = 0;
846 1.32 ad dseen = 0;
847 1.32 ad
848 1.32 ad now = time(NULL);
849 1.32 ad tmp = localtime(&now);
850 1.32 ad tm = *tmp;
851 1.32 ad
852 1.32 ad /* Set no. of days per month */
853 1.32 ad nd = mtab[tm.tm_mon];
854 1.32 ad
855 1.32 ad if (tm.tm_mon == 1 &&
856 1.32 ad ((tm.tm_year + 1900) % 4 == 0) &&
857 1.32 ad ((tm.tm_year + 1900) % 100 != 0) &&
858 1.32 ad ((tm.tm_year + 1900) % 400 == 0))
859 1.32 ad nd++; /* leap year, 29 days in february */
860 1.32 ad tm.tm_hour = tm.tm_min = tm.tm_sec = 0;
861 1.32 ad
862 1.32 ad for (;;) {
863 1.32 ad switch (*s) {
864 1.32 ad case 'D':
865 1.32 ad if (dseen)
866 1.32 ad return ((time_t)-1);
867 1.32 ad dseen++;
868 1.32 ad s++;
869 1.32 ad ul = strtoul(s, &t, 10);
870 1.32 ad if (ul < 0 || ul > 23)
871 1.32 ad return ((time_t)-1);
872 1.32 ad tm.tm_hour = ul;
873 1.32 ad break;
874 1.32 ad
875 1.32 ad case 'W':
876 1.32 ad if (wmseen)
877 1.32 ad return (-1);
878 1.32 ad wmseen++;
879 1.32 ad s++;
880 1.32 ad ul = strtoul(s, &t, 10);
881 1.32 ad if (ul < 0 || ul > 6)
882 1.32 ad return (-1);
883 1.32 ad if (ul != tm.tm_wday) {
884 1.32 ad if (ul < tm.tm_wday) {
885 1.32 ad save = 6 - tm.tm_wday;
886 1.32 ad save += (ul + 1);
887 1.32 ad } else
888 1.32 ad save = ul - tm.tm_wday;
889 1.32 ad tm.tm_mday += save;
890 1.32 ad
891 1.32 ad if (tm.tm_mday > nd) {
892 1.32 ad tm.tm_mon++;
893 1.32 ad tm.tm_mday = tm.tm_mday - nd;
894 1.32 ad }
895 1.32 ad }
896 1.32 ad break;
897 1.32 ad
898 1.32 ad case 'M':
899 1.32 ad if (wmseen)
900 1.32 ad return (-1);
901 1.32 ad wmseen++;
902 1.32 ad s++;
903 1.32 ad if (tolower(*s) == 'l') {
904 1.32 ad tm.tm_mday = nd;
905 1.32 ad s++;
906 1.32 ad t = s;
907 1.32 ad } else {
908 1.32 ad ul = strtoul(s, &t, 10);
909 1.32 ad if (ul < 1 || ul > 31)
910 1.32 ad return (-1);
911 1.32 ad
912 1.32 ad if (ul > nd)
913 1.32 ad return (-1);
914 1.32 ad tm.tm_mday = ul;
915 1.32 ad }
916 1.32 ad break;
917 1.32 ad
918 1.32 ad default:
919 1.32 ad return (-1);
920 1.32 ad break;
921 1.32 ad }
922 1.32 ad
923 1.32 ad if (*t == '\0' || isspace(*t))
924 1.32 ad break;
925 1.32 ad else
926 1.32 ad s = t;
927 1.32 ad }
928 1.32 ad
929 1.32 ad return (mktime(&tm));
930 1.32 ad }
931 1.32 ad
932 1.32 ad /*
933 1.32 ad * Parse a limited subset of ISO 8601. The specific format is as follows:
934 1.32 ad *
935 1.32 ad * [CC[YY[MM[DD]]]][THH[MM[SS]]] (where `T' is the literal letter)
936 1.32 ad *
937 1.32 ad * We don't accept a timezone specification; missing fields (including
938 1.32 ad * timezone) are defaulted to the current date but time zero.
939 1.32 ad */
940 1.32 ad time_t
941 1.32 ad parse_iso8601(char *s)
942 1.32 ad {
943 1.32 ad char *t;
944 1.32 ad struct tm tm, *tmp;
945 1.32 ad u_long ul;
946 1.32 ad time_t now;
947 1.32 ad
948 1.32 ad now = time(NULL);
949 1.32 ad tmp = localtime(&now);
950 1.32 ad tm = *tmp;
951 1.32 ad
952 1.32 ad tm.tm_hour = tm.tm_min = tm.tm_sec = 0;
953 1.32 ad
954 1.32 ad ul = strtoul(s, &t, 10);
955 1.32 ad if (*t != '\0' && *t != 'T')
956 1.32 ad return ((time_t)-1);
957 1.32 ad
958 1.32 ad /*
959 1.32 ad * Now t points either to the end of the string (if no time was
960 1.32 ad * provided) or to the letter `T' which separates date and time in
961 1.32 ad * ISO 8601. The pointer arithmetic is the same for either case.
962 1.32 ad */
963 1.32 ad switch (t - s) {
964 1.32 ad case 8:
965 1.32 ad tm.tm_year = ((ul / 1000000) - 19) * 100;
966 1.32 ad ul = ul % 1000000;
967 1.32 ad /* FALLTHROUGH */
968 1.32 ad case 6:
969 1.32 ad tm.tm_year = tm.tm_year - (tm.tm_year % 100);
970 1.32 ad tm.tm_year += ul / 10000;
971 1.32 ad ul = ul % 10000;
972 1.32 ad /* FALLTHROUGH */
973 1.32 ad case 4:
974 1.32 ad tm.tm_mon = (ul / 100) - 1;
975 1.32 ad ul = ul % 100;
976 1.32 ad /* FALLTHROUGH */
977 1.32 ad case 2:
978 1.32 ad tm.tm_mday = ul;
979 1.32 ad /* FALLTHROUGH */
980 1.32 ad case 0:
981 1.32 ad break;
982 1.32 ad default:
983 1.32 ad return ((time_t)-1);
984 1.32 ad }
985 1.32 ad
986 1.32 ad /* Sanity check */
987 1.32 ad if (tm.tm_year < 70 || tm.tm_mon < 0 || tm.tm_mon > 12 ||
988 1.32 ad tm.tm_mday < 1 || tm.tm_mday > 31)
989 1.32 ad return ((time_t)-1);
990 1.32 ad
991 1.32 ad if (*t != '\0') {
992 1.32 ad s = ++t;
993 1.32 ad ul = strtoul(s, &t, 10);
994 1.32 ad if (*t != '\0' && !isspace(*t))
995 1.32 ad return ((time_t)-1);
996 1.32 ad
997 1.32 ad switch (t - s) {
998 1.32 ad case 6:
999 1.32 ad tm.tm_sec = ul % 100;
1000 1.32 ad ul /= 100;
1001 1.32 ad /* FALLTHROUGH */
1002 1.32 ad case 4:
1003 1.32 ad tm.tm_min = ul % 100;
1004 1.32 ad ul /= 100;
1005 1.32 ad /* FALLTHROUGH */
1006 1.32 ad case 2:
1007 1.32 ad tm.tm_hour = ul;
1008 1.32 ad /* FALLTHROUGH */
1009 1.32 ad case 0:
1010 1.32 ad break;
1011 1.32 ad default:
1012 1.32 ad return ((time_t)-1);
1013 1.32 ad }
1014 1.32 ad
1015 1.32 ad /* Sanity check */
1016 1.32 ad if (tm.tm_sec < 0 || tm.tm_sec > 60 || tm.tm_min < 0 ||
1017 1.32 ad tm.tm_min > 59 || tm.tm_hour < 0 || tm.tm_hour > 23)
1018 1.32 ad return ((time_t)-1);
1019 1.32 ad }
1020 1.32 ad
1021 1.32 ad return (mktime(&tm));
1022 1.1 cgd }
1023