newsyslog.c revision 1.38 1 /* $NetBSD: newsyslog.c,v 1.38 2000/09/21 10:27:34 ad Exp $ */
2
3 /*
4 * Copyright (c) 1999, 2000 Andrew Doran <ad (at) NetBSD.org>
5 * All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 *
16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26 * SUCH DAMAGE.
27 *
28 */
29
30 /*
31 * This file contains changes from the Open Software Foundation.
32 */
33
34 /*
35 * Copyright 1988, 1989 by the Massachusetts Institute of Technology
36 *
37 * Permission to use, copy, modify, and distribute this software
38 * and its documentation for any purpose and without fee is
39 * hereby granted, provided that the above copyright notice
40 * appear in all copies and that both that copyright notice and
41 * this permission notice appear in supporting documentation,
42 * and that the names of M.I.T. and the M.I.T. S.I.P.B. not be
43 * used in advertising or publicity pertaining to distribution
44 * of the software without specific, written prior permission.
45 * M.I.T. and the M.I.T. S.I.P.B. make no representations about
46 * the suitability of this software for any purpose. It is
47 * provided "as is" without express or implied warranty.
48 *
49 */
50
51 /*
52 * newsyslog(8) - a program to roll over log files provided that specified
53 * critera are met, optionally preserving a number of historical log files.
54 */
55
56 #include <sys/cdefs.h>
57 #ifndef lint
58 __RCSID("$NetBSD: newsyslog.c,v 1.38 2000/09/21 10:27:34 ad Exp $");
59 #endif /* not lint */
60
61 #include <sys/types.h>
62 #include <sys/time.h>
63 #include <sys/stat.h>
64 #include <sys/param.h>
65 #include <sys/wait.h>
66
67 #include <ctype.h>
68 #include <fcntl.h>
69 #include <grp.h>
70 #include <pwd.h>
71 #include <signal.h>
72 #include <stdio.h>
73 #include <stdlib.h>
74 #include <stdarg.h>
75 #include <string.h>
76 #include <time.h>
77 #include <unistd.h>
78 #include <errno.h>
79 #include <err.h>
80 #include <util.h>
81 #include <paths.h>
82
83 #include "pathnames.h"
84
85 #define PRHDRINFO(x) ((void)(verbose ? printf x : 0))
86 #define PRINFO(x) ((void)(verbose ? printf(" ") + printf x : 0))
87
88 #define CE_COMPRESS 0x01 /* Compress the achived log files */
89 #define CE_BINARY 0x02 /* Logfile is a binary file/non-syslog */
90 #define CE_NOSIGNAL 0x04 /* Don't send a signal when trimmed */
91 #define CE_CREATE 0x08 /* Create log file if none exists */
92 #define CE_PLAIN0 0x10 /* Do not compress zero'th history file */
93
94 struct conf_entry {
95 uid_t uid; /* Owner of log */
96 gid_t gid; /* Group of log */
97 mode_t mode; /* File permissions */
98 int numhist; /* Number of historical logs to keep */
99 size_t maxsize; /* Maximum log size */
100 int maxage; /* Hours between log trimming */
101 time_t trimat; /* Specific trim time */
102 int flags; /* Flags (CE_*) */
103 int signum; /* Signal to send */
104 char pidfile[MAXPATHLEN]; /* File containing PID to signal */
105 char logfile[MAXPATHLEN]; /* Path to log file */
106 };
107
108 int verbose; /* Be verbose */
109 int noaction; /* Take no action */
110 int nosignal; /* Do not send signals */
111 char hostname[MAXHOSTNAMELEN + 1]; /* Hostname, stripped of domain */
112 uid_t myeuid; /* EUID we are running with */
113
114 int getsig(const char *);
115 int isnumber(const char *);
116 int main(int, char **);
117 int parse_cfgline(struct conf_entry *, FILE *, size_t *);
118 time_t parse_iso8601(char *);
119 time_t parse_dwm(char *);
120 int parse_userspec(const char *, struct passwd **, struct group **);
121 pid_t readpidfile(const char *);
122 void usage(void);
123
124 void log_compress(struct conf_entry *, const char *);
125 void log_create(struct conf_entry *);
126 void log_examine(struct conf_entry *, int);
127 void log_trim(struct conf_entry *);
128 void log_trimmed(struct conf_entry *);
129
130 /*
131 * Program entry point.
132 */
133 int
134 main(int argc, char **argv)
135 {
136 struct conf_entry log;
137 FILE *fd;
138 char *p, *cfile;
139 int c, needroot, i, force;
140 size_t lineno;
141
142 force = 0;
143 needroot = 1;
144 cfile = _PATH_NEWSYSLOGCONF;
145
146 gethostname(hostname, sizeof (hostname));
147 hostname[sizeof (hostname) - 1] = '\0';
148
149 /* Truncate domain. */
150 if ((p = strchr(hostname, '.')) != NULL)
151 *p = '\0';
152
153 /* Parse command line options. */
154 while ((c = getopt(argc, argv, "f:nrsvF")) != -1) {
155 switch (c) {
156 case 'f':
157 cfile = optarg;
158 break;
159 case 'n':
160 noaction = 1;
161 verbose = 1;
162 break;
163 case 'r':
164 needroot = 0;
165 break;
166 case 's':
167 nosignal = 1;
168 break;
169 case 'v':
170 verbose = 1;
171 break;
172 case 'F':
173 force = 1;
174 break;
175 default:
176 usage();
177 /* NOTREACHED */
178 }
179 }
180
181 myeuid = geteuid();
182 if (needroot && myeuid != 0)
183 errx(EXIT_FAILURE, "must be run as root");
184
185 argc -= optind;
186 argv += optind;
187
188 if (strcmp(cfile, "-") == 0)
189 fd = stdin;
190 else if ((fd = fopen(cfile, "rt")) == NULL)
191 err(EXIT_FAILURE, "%s", cfile);
192
193 for (lineno = 0; !parse_cfgline(&log, fd, &lineno);) {
194 /*
195 * If specific log files were specified, touch only
196 * those.
197 */
198 if (argc != 0) {
199 for (i = 0; i < argc; i++)
200 if (strcmp(log.logfile, argv[i]) == 0)
201 break;
202 if (i == argc)
203 continue;
204 }
205 log_examine(&log, force);
206 }
207
208 if (fd != stdin)
209 fclose(fd);
210
211 exit(EXIT_SUCCESS);
212 /* NOTREACHED */
213 }
214
215 /*
216 * Parse a single line from the configuration file.
217 */
218 int
219 parse_cfgline(struct conf_entry *log, FILE *fd, size_t *_lineno)
220 {
221 char *line, *q, **ap, *argv[10];
222 struct passwd *pw;
223 struct group *gr;
224 int nf, lineno, i, rv;
225
226 rv = -1;
227 line = NULL;
228
229 /* Place the white-space separated fields into an array. */
230 do {
231 if (line != NULL)
232 free(line);
233 if ((line = fparseln(fd, NULL, _lineno, NULL, 0)) == NULL)
234 return (rv);
235 lineno = (int)*_lineno;
236
237 for (ap = argv, nf = 0; (*ap = strsep(&line, " \t")) != NULL;)
238 if (**ap != '\0') {
239 if (++nf == sizeof (argv) / sizeof (argv[0])) {
240 warnx("config line %d: "
241 "too many fields", lineno);
242 goto bad;
243 }
244 ap++;
245 }
246 } while (nf == 0);
247
248 if (nf < 6)
249 errx(EXIT_FAILURE, "config line %d: too few fields", lineno);
250
251 memset(log, 0, sizeof (*log));
252
253 /* logfile_name */
254 ap = argv;
255 strlcpy(log->logfile, *ap++, sizeof (log->logfile));
256 if (log->logfile[0] != '/')
257 errx(EXIT_FAILURE,
258 "config line %d: logfile must have a full path", lineno);
259
260 /* owner:group */
261 if (strchr(*ap, ':') != NULL || strchr(*ap, '.') != NULL) {
262 if (parse_userspec(*ap++, &pw, &gr)) {
263 warnx("config line %d: unknown user/group", lineno);
264 goto bad;
265 }
266
267 /*
268 * We may only change the file's owner as non-root.
269 */
270 if (myeuid != 0) {
271 if (pw->pw_uid != myeuid)
272 errx(EXIT_FAILURE, "config line %d: user:group "
273 "as non-root must match current user",
274 lineno);
275 log->uid = (uid_t)-1;
276 } else
277 log->uid = pw->pw_uid;
278 log->gid = gr->gr_gid;
279 if (nf < 7)
280 errx(EXIT_FAILURE, "config line %d: too few fields",
281 lineno);
282 } else if (myeuid != 0) {
283 log->uid = (uid_t)-1;
284 log->gid = getegid();
285 }
286
287 /* mode */
288 if (sscanf(*ap++, "%o", &i) != 1) {
289 warnx("config line %d: bad permissions", lineno);
290 goto bad;
291 }
292 log->mode = (mode_t)i;
293
294 /* count */
295 if (sscanf(*ap++, "%d", &log->numhist) != 1) {
296 warnx("config line %d: bad log count", lineno);
297 goto bad;
298 }
299
300 /* size */
301 if (isdigit(**ap)) {
302 log->maxsize = (int)strtol(*ap, &q, 0);
303 if (*q != '\0') {
304 warnx("config line %d: bad log size", lineno);
305 goto bad;
306 }
307 } else if (**ap == '*')
308 log->maxsize = (size_t)-1;
309 else {
310 warnx("config line %d: bad log size", lineno);
311 goto bad;
312 }
313 ap++;
314
315 /* when */
316 log->maxage = -1;
317 log->trimat = (time_t)-1;
318 q = *ap++;
319
320 if (strcmp(q, "*") != 0) {
321 if (isdigit(*q))
322 log->maxage = (int)strtol(q, &q, 10);
323
324 /*
325 * One class of periodic interval specification can follow a
326 * maximum age specification. Handle it.
327 */
328 if (*q == '@') {
329 log->trimat = parse_iso8601(q + 1);
330 if (log->trimat == (time_t)-1) {
331 warnx("config line %d: bad trim time", lineno);
332 goto bad;
333 }
334 } else if (*q == '$') {
335 if ((log->trimat = parse_dwm(q + 1)) == (time_t)-1) {
336 warnx("config line %d: bad trim time", lineno);
337 goto bad;
338 }
339 } else if (log->maxage == -1) {
340 warnx("config line %d: bad log age", lineno);
341 goto bad;
342 }
343 }
344
345 /* flags */
346 log->flags = 0;
347 for (q = *ap++; q != NULL && *q != '\0'; q++) {
348 switch (tolower(*q)) {
349 case 'b':
350 log->flags |= CE_BINARY;
351 break;
352 case 'c':
353 log->flags |= CE_CREATE;
354 break;
355 case 'n':
356 log->flags |= CE_NOSIGNAL;
357 break;
358 case 'p':
359 log->flags |= CE_PLAIN0;
360 break;
361 case 'z':
362 log->flags |= CE_COMPRESS;
363 break;
364 case '-':
365 break;
366 default:
367 warnx("config line %d: bad flags", lineno);
368 goto bad;
369 }
370 }
371
372 /* path_to_pidfile */
373 if (*ap != NULL && **ap == '/')
374 strlcpy(log->pidfile, *ap++, sizeof (log->pidfile));
375 else
376 log->pidfile[0] = '\0';
377
378 /* sigtype */
379 if (*ap != NULL && (log->signum = getsig(*ap++)) < 0) {
380 warnx("config line %d: bad signal type", lineno);
381 goto bad;
382 } else
383 log->signum = SIGHUP;
384
385 rv = 0;
386
387 bad:
388 free(line);
389 return (rv);
390 }
391
392 /*
393 * Examine a log file. If the trim conditions are met, call log_trim() to
394 * trim the log file.
395 */
396 void
397 log_examine(struct conf_entry *log, int force)
398 {
399 struct stat sb;
400 size_t size;
401 int age, trim;
402 char tmp[MAXPATHLEN];
403 const char *reason;
404 time_t now;
405
406 now = time(NULL);
407
408 PRHDRINFO(("\n%s <%d%s>: ", log->logfile, log->numhist,
409 (log->flags & CE_COMPRESS) != 0 ? "Z" : ""));
410
411 /*
412 * stat() the logfile. If it doesn't exist and the `c' flag has
413 * been specified, create it. If it doesn't exist and the `c' flag
414 * hasn't been specified, give up.
415 */
416 if (stat(log->logfile, &sb) < 0) {
417 if (errno == ENOENT && (log->flags & CE_CREATE) != 0) {
418 PRHDRINFO(("creating; "));
419 if (!noaction)
420 log_create(log);
421 else {
422 PRHDRINFO(("can't proceed with `-n'\n"));
423 return;
424 }
425 if (stat(log->logfile, &sb))
426 err(EXIT_FAILURE, "%s", log->logfile);
427 } else if (errno == ENOENT) {
428 PRHDRINFO(("does not exist --> skip log\n"));
429 return;
430 } else if (errno != 0)
431 err(EXIT_FAILURE, "%s", log->logfile);
432 }
433
434 /* Size of the log file in kB. */
435 size = ((size_t)sb.st_blocks * S_BLKSIZE) >> 10;
436
437 /*
438 * Get the age (expressed in hours) of the current log file with
439 * respect to the newest historical log file.
440 */
441 strlcpy(tmp, log->logfile, sizeof (tmp));
442 strlcat(tmp, ".0", sizeof (tmp));
443 if (stat(tmp, &sb) < 0) {
444 strlcat(tmp, ".gz", sizeof (tmp));
445 if (stat(tmp, &sb) < 0)
446 age = -1;
447 else
448 age = (int)(now - sb.st_mtime + 1800) / 3600;
449 } else
450 age = (int)(now - sb.st_mtime + 1800) / 3600;
451
452 /*
453 * Examine the set of given trim conditions and if any one is met,
454 * trim the log.
455 *
456 * Note: if `maxage' or `trimat' is used as a trim condition, we
457 * need at least one historical log file to determine the `age' of
458 * the active log file. WRT `trimat', we will trim up to one hour
459 * after the specific trim time has passed - we need to know if
460 * we've trimmed to meet that condition with a previous invocation
461 * of newsyslog(8).
462 */
463 if (log->maxage >= 0 && (age >= log->maxage || age < 0)) {
464 trim = 1;
465 reason = "log age > interval";
466 } else if (size >= log->maxsize) {
467 trim = 1;
468 reason = "log size > size";
469 } else if (log->trimat != (time_t)-1 && now >= log->trimat &&
470 age > 1 && difftime(now, log->trimat) < 60 * 60) {
471 trim = 1;
472 reason = "specific trim time";
473 } else {
474 trim = force;
475 reason = "trim forced";
476 }
477
478 if (trim) {
479 PRHDRINFO(("--> trim log (%s)\n", reason));
480 log_trim(log);
481 } else
482 PRHDRINFO(("--> skip log (trim conditions not met)\n"));
483 }
484
485 /*
486 * Trim the specified log file.
487 */
488 void
489 log_trim(struct conf_entry *log)
490 {
491 char file1[MAXPATHLEN], file2[MAXPATHLEN];
492 int i;
493 struct stat st;
494 pid_t pid;
495
496 /* Remove oldest historical log. */
497 snprintf(file1, sizeof (file1), "%s.%d", log->logfile,
498 log->numhist - 1);
499
500 PRINFO(("rm -f %s\n", file1));
501 if (!noaction)
502 unlink(file1);
503 strlcat(file1, ".gz", sizeof (file1));
504 PRINFO(("rm -f %s\n", file1));
505 if (!noaction)
506 unlink(file1);
507
508 /* Move down log files. */
509 for (i = log->numhist - 1; i != 0; i--) {
510 snprintf(file1, sizeof (file1), "%s.%d", log->logfile, i - 1);
511 snprintf(file2, sizeof (file2), "%s.%d", log->logfile, i);
512
513 if (lstat(file1, &st) != 0) {
514 strlcat(file1, ".gz", sizeof (file1));
515 strlcat(file2, ".gz", sizeof (file2));
516 if (lstat(file1, &st) != 0)
517 continue;
518 }
519
520 PRINFO(("mv %s %s\n", file1, file2));
521 if (!noaction)
522 if (rename(file1, file2))
523 err(EXIT_FAILURE, "%s", file1);
524 PRINFO(("chmod %o %s\n", log->mode, file2));
525 if (!noaction)
526 if (chmod(file2, log->mode))
527 err(EXIT_FAILURE, "%s", file2);
528 PRINFO(("chown %d:%d %s\n", log->uid, log->gid,
529 file2));
530 if (!noaction)
531 if (chown(file2, log->uid, log->gid))
532 err(EXIT_FAILURE, "%s", file2);
533 }
534
535 /*
536 * If a historical log file isn't compressed, and 'z' has been
537 * specified, compress it. (This is convenient, but is also needed
538 * if 'p' has been specified.) It should be noted that gzip(1)
539 * preserves file ownership and file mode.
540 */
541 for (i = (log->flags & CE_PLAIN0) != 0; i < log->numhist; i++) {
542 snprintf(file1, sizeof (file1), "%s.%d", log->logfile, i);
543 if (lstat(file1, &st) != 0)
544 continue;
545 snprintf(file2, sizeof (file2), "%s.gz", file1);
546 if (lstat(file2, &st) == 0)
547 continue;
548 log_compress(log, file1);
549 }
550
551 log_trimmed(log);
552
553 /* Create the historical log file if we're maintaining history. */
554 if (log->numhist == 0) {
555 PRINFO(("rm -f %s\n", log->logfile));
556 if (!noaction)
557 if (unlink(log->logfile))
558 err(EXIT_FAILURE, "%s", log->logfile);
559 } else {
560 snprintf(file1, sizeof (file1), "%s.0", log->logfile);
561 PRINFO(("mv %s %s\n", log->logfile, file1));
562 if (!noaction)
563 if (rename(log->logfile, file1))
564 err(EXIT_FAILURE, "%s", log->logfile);
565 }
566
567 PRINFO(("(create new log)\n"));
568 log_create(log);
569 log_trimmed(log);
570
571 /* Set the correct permissions on the log. */
572 PRINFO(("chmod %o %s\n", log->mode, log->logfile));
573 if (!noaction)
574 if (chmod(log->logfile, log->mode))
575 err(EXIT_FAILURE, "%s", log->logfile);
576
577 /* Do we need to signal a daemon? */
578 if (!nosignal && (log->flags & CE_NOSIGNAL) == 0) {
579 if (log->pidfile[0] != '\0')
580 pid = readpidfile(log->pidfile);
581 else
582 pid = readpidfile(_PATH_SYSLOGDPID);
583
584 if (pid != (pid_t)-1) {
585 PRINFO(("kill -%s %lu\n",
586 sys_signame[log->signum], (u_long)pid));
587 if (!noaction)
588 if (kill(pid, log->signum))
589 warn("kill");
590 }
591 }
592
593 /* If the newest historical log is to be compressed, do it here. */
594 if ((log->flags & (CE_PLAIN0 | CE_COMPRESS)) == CE_COMPRESS) {
595 snprintf(file1, sizeof (file1), "%s.0", log->logfile);
596 log_compress(log, file1);
597 }
598 }
599
600 /*
601 * Write an entry to the log file recording the fact that it was trimmed.
602 */
603 void
604 log_trimmed(struct conf_entry *log)
605 {
606 FILE *fd;
607 time_t now;
608 char *daytime;
609
610 if ((log->flags & CE_BINARY) != 0)
611 return;
612 PRINFO(("(append rotation notice to %s)\n", log->logfile));
613 if (noaction)
614 return;
615
616 if ((fd = fopen(log->logfile, "at")) == NULL)
617 err(EXIT_FAILURE, "%s", log->logfile);
618
619 now = time(NULL);
620 daytime = ctime(&now) + 4;
621 daytime[15] = '\0';
622
623 fprintf(fd, "%s %s newsyslog[%lu]: log file turned over\n", daytime,
624 hostname, (u_long)getpid());
625 fclose(fd);
626 }
627
628 /*
629 * Create a new log file.
630 */
631 void
632 log_create(struct conf_entry *log)
633 {
634 int fd;
635
636 if (noaction)
637 return;
638
639 if ((fd = creat(log->logfile, log->mode)) < 0)
640 err(EXIT_FAILURE, "%s", log->logfile);
641 if (fchown(fd, log->uid, log->gid) < 0)
642 err(EXIT_FAILURE, "%s", log->logfile);
643 close(fd);
644 }
645
646 /*
647 * Fork off gzip(1) to compress a log file. This routine takes an
648 * additional string argument (the name of the file to compress): it is also
649 * used to compress historical log files other than the newest.
650 */
651 void
652 log_compress(struct conf_entry *log, const char *fn)
653 {
654 char tmp[MAXPATHLEN];
655
656 PRINFO(("gzip %s\n", fn));
657 if (!noaction) {
658 pid_t pid;
659 int status;
660
661 if ((pid = vfork()) < 0)
662 err(EXIT_FAILURE, "vfork");
663 else if (pid == 0) {
664 execl(_PATH_GZIP, "gzip", "-f", fn, NULL);
665 _exit(EXIT_FAILURE);
666 }
667 while (waitpid(pid, &status, 0) != pid);
668
669 if (!WIFEXITED(status) || (WEXITSTATUS(status) != 0))
670 errx(EXIT_FAILURE, "gzip failed");
671 }
672
673 snprintf(tmp, sizeof (tmp), "%s.gz", fn);
674 PRINFO(("chown %d:%d %s\n", log->uid, log->gid, tmp));
675 if (!noaction)
676 if (chown(tmp, log->uid, log->gid))
677 err(EXIT_FAILURE, "%s", tmp);
678 }
679
680 /*
681 * Display program usage information.
682 */
683 void
684 usage(void)
685 {
686
687 fprintf(stderr,
688 "usage: newsyslog [-nrsvF] [-f config-file] [file ...]\n");
689 exit(EXIT_FAILURE);
690 }
691
692 /*
693 * Return non-zero if a string represents a decimal value.
694 */
695 int
696 isnumber(const char *string)
697 {
698
699 while (isdigit(*string))
700 string++;
701
702 return (*string == '\0');
703 }
704
705 /*
706 * Given a signal name, attempt to find the corresponding signal number.
707 */
708 int
709 getsig(const char *sig)
710 {
711 char *p;
712 int n;
713
714 if (isnumber(sig)) {
715 n = (int)strtol(sig, &p, 0);
716 if (p != '\0' || n < 0 || n >= NSIG)
717 return (-1);
718 return (n);
719 }
720
721 if (strncasecmp(sig, "SIG", 3) == 0)
722 sig += 3;
723 for (n = 1; n < NSIG; n++)
724 if (strcasecmp(sys_signame[n], sig) == 0)
725 return (n);
726 return (-1);
727 }
728
729 /*
730 * Given a path to a PID file, return the PID contained within.
731 */
732 pid_t
733 readpidfile(const char *file)
734 {
735 FILE *fd;
736 char line[BUFSIZ];
737 pid_t pid;
738
739 #ifdef notyet
740 if (file[0] != '/')
741 snprintf(tmp, sizeof (tmp), "%s%s", _PATH_VARRUN, file);
742 else
743 strlcpy(tmp, file, sizeof (tmp));
744 #endif
745
746 if ((fd = fopen(file, "rt")) == NULL) {
747 warn("%s", file);
748 return (-1);
749 }
750
751 if (fgets(line, sizeof (line) - 1, fd) != NULL) {
752 line[sizeof (line) - 1] = '\0';
753 pid = (pid_t)strtol(line, NULL, 0);
754 } else {
755 warnx("unable to read %s", file);
756 pid = (pid_t)-1;
757 }
758
759 fclose(fd);
760 return (pid);
761 }
762
763 /*
764 * Parse a user:group specification.
765 *
766 * XXX This is over the top for newsyslog(8). It should be moved to libutil.
767 */
768 int
769 parse_userspec(const char *name, struct passwd **pw, struct group **gr)
770 {
771 char buf[MAXLOGNAME * 2 + 2], *group;
772
773 strlcpy(buf, name, sizeof (buf));
774 *gr = NULL;
775
776 /*
777 * Before attempting to use '.' as a separator, see if the whole
778 * string resolves as a user name.
779 */
780 if ((*pw = getpwnam(buf)) != NULL) {
781 *gr = getgrgid((*pw)->pw_gid);
782 return (0);
783 }
784
785 /* Split the user and group name. */
786 if ((group = strchr(buf, ':')) != NULL ||
787 (group = strchr(buf, '.')) != NULL)
788 *group++ = '\0';
789
790 if (isnumber(buf))
791 *pw = getpwuid((uid_t)atoi(buf));
792 else
793 *pw = getpwnam(buf);
794
795 /*
796 * Find the group. If a group wasn't specified, use the user's
797 * `natural' group. We get to this point even if no user was found.
798 * This is to allow the caller to get a better idea of what went
799 * wrong, if anything.
800 */
801 if (group == NULL || *group == '\0') {
802 if (*pw == NULL)
803 return (-1);
804 *gr = getgrgid((*pw)->pw_gid);
805 } else if (isnumber(group))
806 *gr = getgrgid((gid_t)atoi(group));
807 else
808 *gr = getgrnam(group);
809
810 return (*pw != NULL && *gr != NULL ? 0 : -1);
811 }
812
813 /*
814 * Parse a cyclic time specification, the format is as follows:
815 *
816 * [Dhh] or [Wd[Dhh]] or [Mdd[Dhh]]
817 *
818 * to rotate a log file cyclic at
819 *
820 * - every day (D) within a specific hour (hh) (hh = 0...23)
821 * - once a week (W) at a specific day (d) OR (d = 0..6, 0 = Sunday)
822 * - once a month (M) at a specific day (d) (d = 1..31,l|L)
823 *
824 * We don't accept a timezone specification; missing fields are defaulted to
825 * the current date but time zero.
826 */
827 time_t
828 parse_dwm(char *s)
829 {
830 char *t;
831 struct tm tm, *tmp;
832 u_long ul;
833 time_t now;
834 static int mtab[] = { 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
835 int wmseen, dseen, nd, save;
836
837 wmseen = 0;
838 dseen = 0;
839
840 now = time(NULL);
841 tmp = localtime(&now);
842 tm = *tmp;
843
844 /* Set no. of days per month */
845 nd = mtab[tm.tm_mon];
846
847 if (tm.tm_mon == 1 &&
848 ((tm.tm_year + 1900) % 4 == 0) &&
849 ((tm.tm_year + 1900) % 100 != 0) &&
850 ((tm.tm_year + 1900) % 400 == 0))
851 nd++; /* leap year, 29 days in february */
852 tm.tm_hour = tm.tm_min = tm.tm_sec = 0;
853
854 for (;;) {
855 switch (*s) {
856 case 'D':
857 if (dseen)
858 return ((time_t)-1);
859 dseen++;
860 s++;
861 ul = strtoul(s, &t, 10);
862 if (ul < 0 || ul > 23)
863 return ((time_t)-1);
864 tm.tm_hour = ul;
865 break;
866
867 case 'W':
868 if (wmseen)
869 return (-1);
870 wmseen++;
871 s++;
872 ul = strtoul(s, &t, 10);
873 if (ul < 0 || ul > 6)
874 return (-1);
875 if (ul != tm.tm_wday) {
876 if (ul < tm.tm_wday) {
877 save = 6 - tm.tm_wday;
878 save += (ul + 1);
879 } else
880 save = ul - tm.tm_wday;
881 tm.tm_mday += save;
882
883 if (tm.tm_mday > nd) {
884 tm.tm_mon++;
885 tm.tm_mday = tm.tm_mday - nd;
886 }
887 }
888 break;
889
890 case 'M':
891 if (wmseen)
892 return (-1);
893 wmseen++;
894 s++;
895 if (tolower(*s) == 'l') {
896 tm.tm_mday = nd;
897 s++;
898 t = s;
899 } else {
900 ul = strtoul(s, &t, 10);
901 if (ul < 1 || ul > 31)
902 return (-1);
903
904 if (ul > nd)
905 return (-1);
906 tm.tm_mday = ul;
907 }
908 break;
909
910 default:
911 return (-1);
912 break;
913 }
914
915 if (*t == '\0' || isspace(*t))
916 break;
917 else
918 s = t;
919 }
920
921 return (mktime(&tm));
922 }
923
924 /*
925 * Parse a limited subset of ISO 8601. The specific format is as follows:
926 *
927 * [CC[YY[MM[DD]]]][THH[MM[SS]]] (where `T' is the literal letter)
928 *
929 * We don't accept a timezone specification; missing fields (including
930 * timezone) are defaulted to the current date but time zero.
931 */
932 time_t
933 parse_iso8601(char *s)
934 {
935 char *t;
936 struct tm tm, *tmp;
937 u_long ul;
938 time_t now;
939
940 now = time(NULL);
941 tmp = localtime(&now);
942 tm = *tmp;
943
944 tm.tm_hour = tm.tm_min = tm.tm_sec = 0;
945
946 ul = strtoul(s, &t, 10);
947 if (*t != '\0' && *t != 'T')
948 return ((time_t)-1);
949
950 /*
951 * Now t points either to the end of the string (if no time was
952 * provided) or to the letter `T' which separates date and time in
953 * ISO 8601. The pointer arithmetic is the same for either case.
954 */
955 switch (t - s) {
956 case 8:
957 tm.tm_year = ((ul / 1000000) - 19) * 100;
958 ul = ul % 1000000;
959 /* FALLTHROUGH */
960 case 6:
961 tm.tm_year = tm.tm_year - (tm.tm_year % 100);
962 tm.tm_year += ul / 10000;
963 ul = ul % 10000;
964 /* FALLTHROUGH */
965 case 4:
966 tm.tm_mon = (ul / 100) - 1;
967 ul = ul % 100;
968 /* FALLTHROUGH */
969 case 2:
970 tm.tm_mday = ul;
971 /* FALLTHROUGH */
972 case 0:
973 break;
974 default:
975 return ((time_t)-1);
976 }
977
978 /* Sanity check */
979 if (tm.tm_year < 70 || tm.tm_mon < 0 || tm.tm_mon > 12 ||
980 tm.tm_mday < 1 || tm.tm_mday > 31)
981 return ((time_t)-1);
982
983 if (*t != '\0') {
984 s = ++t;
985 ul = strtoul(s, &t, 10);
986 if (*t != '\0' && !isspace(*t))
987 return ((time_t)-1);
988
989 switch (t - s) {
990 case 6:
991 tm.tm_sec = ul % 100;
992 ul /= 100;
993 /* FALLTHROUGH */
994 case 4:
995 tm.tm_min = ul % 100;
996 ul /= 100;
997 /* FALLTHROUGH */
998 case 2:
999 tm.tm_hour = ul;
1000 /* FALLTHROUGH */
1001 case 0:
1002 break;
1003 default:
1004 return ((time_t)-1);
1005 }
1006
1007 /* Sanity check */
1008 if (tm.tm_sec < 0 || tm.tm_sec > 60 || tm.tm_min < 0 ||
1009 tm.tm_min > 59 || tm.tm_hour < 0 || tm.tm_hour > 23)
1010 return ((time_t)-1);
1011 }
1012
1013 return (mktime(&tm));
1014 }
1015