xref: /src/usr.bin/newsyslog/newsyslog.c

/*	$NetBSD: newsyslog.c,v 1.59.6.1 2012/10/30 19:00:25 yamt Exp $	*/

/*
 * Copyright (c) 1999, 2000 Andrew Doran <ad (at) NetBSD.org>
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 */

/*
 * This file contains changes from the Open Software Foundation.
 */

/*
 * Copyright 1988, 1989 by the Massachusetts Institute of Technology
 *
 * Permission to use, copy, modify, and distribute this software
 * and its documentation for any purpose and without fee is
 * hereby granted, provided that the above copyright notice
 * appear in all copies and that both that copyright notice and
 * this permission notice appear in supporting documentation,
 * and that the names of M.I.T. and the M.I.T. S.I.P.B. not be
 * used in advertising or publicity pertaining to distribution
 * of the software without specific, written prior permission.
 * M.I.T. and the M.I.T. S.I.P.B. make no representations about
 * the suitability of this software for any purpose.  It is
 * provided "as is" without express or implied warranty.
 *
 */

/*
 * newsyslog(8) - a program to roll over log files provided that specified
 * critera are met, optionally preserving a number of historical log files.
 */

#include <sys/cdefs.h>
#ifndef lint
__RCSID("$NetBSD: newsyslog.c,v 1.59.6.1 2012/10/30 19:00:25 yamt Exp $");
#endif /* not lint */

#include <sys/types.h>
#include <sys/time.h>
#include <sys/stat.h>
#include <sys/param.h>
#include <sys/wait.h>

#include <ctype.h>
#include <fcntl.h>
#include <grp.h>
#include <pwd.h>
#include <signal.h>
#include <stdio.h>
#include <stdlib.h>
#include <stdarg.h>
#include <string.h>
#include <time.h>
#include <unistd.h>
#include <errno.h>
#include <err.h>
#include <paths.h>

#define PRHDRINFO(x)	\
    (/*LINTED*/(void)(verbose ? printf x : 0))
#define PRINFO(x)	\
    (/*LINTED*/(void)(verbose ? printf("  ") + printf x : 0))

#ifndef __arraycount
#define __arraycount(a) (sizeof(a) / sizeof(a[0]))
#endif

#define	CE_BINARY	0x02	/* Logfile is a binary file/non-syslog */
#define	CE_NOSIGNAL	0x04	/* Don't send a signal when trimmed */
#define	CE_CREATE	0x08	/* Create log file if none exists */
#define	CE_PLAIN0	0x10	/* Do not compress zero'th history file */
#define	CE_SYSLPROTOCOL 0x20	/* log in syslog-protocol format,
				   not configurable but detected at runtime */

struct conf_entry {
	uid_t	uid;			/* Owner of log */
	gid_t	gid;			/* Group of log */
	mode_t	mode;			/* File permissions */
	int	numhist;		/* Number of historical logs to keep */
	size_t	maxsize;		/* Maximum log size */
	int	maxage;			/* Hours between log trimming */
	time_t	trimat;			/* Specific trim time */
	int	flags;			/* Flags (CE_*) */
	int	signum;			/* Signal to send */
	char	pidfile[MAXPATHLEN];	/* File containing PID to signal */
	char	logfile[MAXPATHLEN];	/* Path to log file */
};

struct compressor {
	const char *path;
	const char *args;
	const char *suffix;
	const char *flag; /* newsyslog.conf flag */
};

static struct compressor compress[] =
{
	{NULL, "", "", ""}, /* 0th compressor is "no compression" */
	{"/usr/bin/gzip", "-f", ".gz", "Z"},
	{"/usr/bin/bzip2", "-9f", ".bz2", "J"},
	{"/usr/bin/xz", "-f", ".xz", "X"},
};

#define _PATH_NEWSYSLOGCONF	"/etc/newsyslog.conf"
#define _PATH_SYSLOGDPID	_PATH_VARRUN"syslogd.pid"

static int	verbose;			/* Be verbose */
static int	noaction;			/* Take no action */
static int	nosignal;			/* Do not send signals */
static char	hostname[MAXHOSTNAMELEN + 1];	/* Hostname, with domain */
static uid_t	myeuid;				/* EUID we are running with */
static int	ziptype;			/* compression type, if any */

static int	getsig(const char *);
static int	isnumber(const char *);
static int	parse_cfgline(struct conf_entry *, FILE *, size_t *);
static time_t	parse_iso8601(char *);
static time_t	parse_dwm(char *);
static int	parse_userspec(const char *, struct passwd **, struct group **);
static pid_t	readpidfile(const char *);
static void	usage(void) __dead;

static void	log_compress(struct conf_entry *, const char *);
static void	log_create(struct conf_entry *);
static void	log_examine(struct conf_entry *, int);
static void	log_trim(struct conf_entry *);
static void	log_trimmed(struct conf_entry *);
static void	log_get_format(struct conf_entry *);

/*
 * Program entry point.
 */
int
main(int argc, char **argv)
{
	struct conf_entry log;
	FILE *fd;
	const char *cfile;
	int c, needroot, i, force;
	size_t lineno;

	force = 0;
	needroot = 1;
	ziptype = 0;
	cfile = _PATH_NEWSYSLOGCONF;

	(void)gethostname(hostname, sizeof(hostname));
	hostname[sizeof(hostname) - 1] = '\0';

	/* Parse command line options. */
	while ((c = getopt(argc, argv, "f:nrsvF")) != -1) {
		switch (c) {
		case 'f':
			cfile = optarg;
			break;
		case 'n':
			noaction = 1;
			verbose = 1;
			break;
		case 'r':
			needroot = 0;
			break;
		case 's':
			nosignal = 1;
			break;
		case 'v':
			verbose = 1;
			break;
		case 'F':
			force = 1;
			break;
		default:
			usage();
			/* NOTREACHED */
		}
	}

	myeuid = geteuid();
	if (needroot && myeuid != 0)
		errx(EXIT_FAILURE, "must be run as root");

	argc -= optind;
	argv += optind;

	if (strcmp(cfile, "-") == 0)
		fd = stdin;
	else if ((fd = fopen(cfile, "rt")) == NULL)
		err(EXIT_FAILURE, "%s", cfile);

	for (lineno = 0; !parse_cfgline(&log, fd, &lineno);) {
		/*
		 * If specific log files were specified, touch only
		 * those.
		 */
		if (argc != 0) {
			for (i = 0; i < argc; i++)
				if (strcmp(log.logfile, argv[i]) == 0)
					break;
			if (i == argc)
				continue;
		}
		log_examine(&log, force);
	}

	if (fd != stdin)
		(void)fclose(fd);

	exit(EXIT_SUCCESS);
	/* NOTREACHED */
}

/*
 * Parse a single line from the configuration file.
 */
static int
parse_cfgline(struct conf_entry *log, FILE *fd, size_t *_lineno)
{
	char *line, *q, **ap, *argv[10];
	struct passwd *pw;
	struct group *gr;
	int nf, lineno, i, rv;

	rv = -1;
	line = NULL;
	ziptype = 0;

	/* Place the white-space separated fields into an array. */
	do {
		if (line != NULL)
			free(line);
		if ((line = fparseln(fd, NULL, _lineno, NULL, 0)) == NULL)
			return (rv);
		lineno = (int)*_lineno;

		for (ap = argv, nf = 0; (*ap = strsep(&line, " \t")) != NULL;)
			if (**ap != '\0') {
				if (++nf == sizeof(argv) / sizeof(argv[0])) {
					warnx("config line %d: "
					    "too many fields", lineno);
					goto bad;
				}
				ap++;
			}
	} while (nf == 0);

	if (nf < 6)
		errx(EXIT_FAILURE, "config line %d: too few fields", lineno);

	(void)memset(log, 0, sizeof(*log));

	/* logfile_name */
	ap = argv;
	(void)strlcpy(log->logfile, *ap++, sizeof(log->logfile));
	if (log->logfile[0] != '/')
		errx(EXIT_FAILURE,
		    "config line %d: logfile must have a full path", lineno);

	/* owner:group */
	if (strchr(*ap, ':') != NULL || strchr(*ap, '.') != NULL) {
		if (parse_userspec(*ap++, &pw, &gr)) {
			warnx("config line %d: unknown user/group", lineno);
			goto bad;
		}

		/*
		 * We may only change the file's owner as non-root.
		 */
		if (myeuid != 0) {
			if (pw->pw_uid != myeuid)
				errx(EXIT_FAILURE, "config line %d: user:group "
				    "as non-root must match current user",
				    lineno);
			log->uid = (uid_t)-1;
		} else
			log->uid = pw->pw_uid;
		log->gid = gr->gr_gid;
		if (nf < 7)
			errx(EXIT_FAILURE, "config line %d: too few fields",
			    lineno);
	} else if (myeuid != 0) {
		log->uid = (uid_t)-1;
		log->gid = getegid();
	}

	/* mode */
	if (sscanf(*ap++, "%o", &i) != 1) {
		warnx("config line %d: bad permissions", lineno);
		goto bad;
	}
	log->mode = (mode_t)i;

	/* count */
	if (sscanf(*ap++, "%d", &log->numhist) != 1) {
		warnx("config line %d: bad log count", lineno);
		goto bad;
	}

	/* size */
	if (**ap == '*')
		log->maxsize = (size_t)-1;
	else {
		log->maxsize = (int)strtol(*ap, &q, 0);
		if (*q != '\0') {
			warnx("config line %d: bad log size", lineno);
			goto bad;
		}
	}
	ap++;

	/* when */
	log->maxage = -1;
	log->trimat = (time_t)-1;
	q = *ap++;

	if (strcmp(q, "*") != 0) {
		if (isdigit((unsigned char)*q))
			log->maxage = (int)strtol(q, &q, 10);

		/*
		 * One class of periodic interval specification can follow a
		 * maximum age specification.  Handle it.
		 */
		if (*q == '@') {
			log->trimat = parse_iso8601(q + 1);
			if (log->trimat == (time_t)-1) {
				warnx("config line %d: bad trim time", lineno);
				goto bad;
			}
		} else if (*q == '$') {
			if ((log->trimat = parse_dwm(q + 1)) == (time_t)-1) {
				warnx("config line %d: bad trim time", lineno);
				goto bad;
			}
		} else if (log->maxage == -1) {
			warnx("config line %d: bad log age", lineno);
			goto bad;
		}
	}

	/* flags */
	log->flags = (nosignal ? CE_NOSIGNAL : 0);

	for (q = *ap++; q != NULL && *q != '\0'; q++) {
		char qq = toupper((unsigned char)*q);
		switch (qq) {
		case 'B':
			log->flags |= CE_BINARY;
			break;
		case 'C':
			log->flags |= CE_CREATE;
			break;
		case 'N':
			log->flags |= CE_NOSIGNAL;
			break;
		case 'P':
			log->flags |= CE_PLAIN0;
			break;
		case 'J': case 'X': case 'Z':
			for (ziptype = __arraycount(compress); --ziptype; ) {
				if (*compress[ziptype].flag == qq)
				    break;
			}
			break;
		case '-':
			break;
		default:
			warnx("config line %d: bad flags", lineno);
			goto bad;
		}
	}

	/* path_to_pidfile */
	if (*ap != NULL && **ap == '/')
		(void)strlcpy(log->pidfile, *ap++, sizeof(log->pidfile));
	else
		log->pidfile[0] = '\0';

	/* sigtype */
	if (*ap != NULL) {
		if ((log->signum = getsig(*ap++)) < 0) {
			warnx("config line %d: bad signal type", lineno);
			goto bad;
		}
	} else
		log->signum = SIGHUP;

	rv = 0;

bad:
	free(line);
	return (rv);
}

/*
 * Examine a log file.	If the trim conditions are met, call log_trim() to
 * trim the log file.
 */
static void
log_examine(struct conf_entry *log, int force)
{
	struct stat sb;
	size_t size;
	int age, trim;
	unsigned int j;
	char tmp[MAXPATHLEN];
	const char *reason;
	time_t now;

	now = time(NULL);

	PRHDRINFO(("\n%s <%d%s>: ", log->logfile, log->numhist,
	    compress[ziptype].flag));

	/*
	 * stat() the logfile.	If it doesn't exist and the `c' flag has
	 * been specified, create it.  If it doesn't exist and the `c' flag
	 * hasn't been specified, give up.
	 */
	if (stat(log->logfile, &sb) < 0) {
		if (errno == ENOENT && (log->flags & CE_CREATE) != 0) {
			PRHDRINFO(("creating; "));
			if (!noaction)
				log_create(log);
			else {
				PRHDRINFO(("can't proceed with `-n'\n"));
				return;
			}
			if (stat(log->logfile, &sb))
				err(EXIT_FAILURE, "%s", log->logfile);
		} else if (errno == ENOENT) {
			PRHDRINFO(("does not exist --> skip log\n"));
			return;
		} else if (errno != 0)
			err(EXIT_FAILURE, "%s", log->logfile);
	}

	if (!S_ISREG(sb.st_mode)) {
		PRHDRINFO(("not a regular file --> skip log\n"));
		return;
	}

	/* Size of the log file in kB. */
	size = ((size_t)sb.st_blocks * S_BLKSIZE) >> 10;

	/*
	 * Get the age (expressed in hours) of the current log file with
	 * respect to the newest historical log file.
	 */
	age = -1;
	for (j = 0; j < __arraycount(compress); j++) {
		(void)strlcpy(tmp, log->logfile, sizeof(tmp));
		(void)strlcat(tmp, ".0", sizeof(tmp));
		(void)strlcat(tmp, compress[j].suffix, sizeof(tmp));
		if (!stat(tmp, &sb)) {
			age = (int)(now - sb.st_mtime + 1800) / 3600;
			break;
		}
	}

	/*
	 * Examine the set of given trim conditions and if any one is met,
	 * trim the log.
	 *
	 * Note: if `maxage' or `trimat' is used as a trim condition, we
	 * need at least one historical log file to determine the `age' of
	 * the active log file.	 WRT `trimat', we will trim up to one hour
	 * after the specific trim time has passed - we need to know if
	 * we've trimmed to meet that condition with a previous invocation
	 * of newsyslog(8).
	 */
	if (log->maxage >= 0 && (age >= log->maxage || age < 0)) {
		trim = 1;
		reason = "log age > interval";
	} else if (size >= log->maxsize) {
		trim = 1;
		reason = "log size > size";
	} else if (log->trimat != (time_t)-1 && now >= log->trimat &&
		   (age == -1 || age > 1) &&
		   difftime(now, log->trimat) < 60 * 60) {
		trim = 1;
		reason = "specific trim time";
	} else {
		trim = force;
		reason = "trim forced";
	}

	if (trim) {
		PRHDRINFO(("--> trim log (%s)\n", reason));
		log_trim(log);
	} else
		PRHDRINFO(("--> skip log (trim conditions not met)\n"));
}

/*
 * Trim the specified log file.
 */
static void
log_trim(struct conf_entry *log)
{
	char file1[MAXPATHLEN], file2[MAXPATHLEN];
	int i, j, k;
	struct stat st;
	pid_t pid;

	if (log->numhist != 0) {
		/* Remove oldest historical log. */
		for (j = 0; j < (int)__arraycount(compress); j++) {
			(void)snprintf(file1, sizeof(file1), "%s.%d",
			    log->logfile, log->numhist - 1);
			(void)strlcat(file1, compress[j].suffix,
			    sizeof(file1));
			PRINFO(("rm -f %s\n", file1));
			if (!noaction)
				(void)unlink(file1);
		}
	}

	/*
	 * If a historical log file isn't compressed, and 'z' has been
	 * specified, compress it.  (This is convenient, but is also needed
	 * if 'p' has been specified.)  It should be noted that gzip(1)
	 * preserves file ownership and file mode.
	 */
	if (ziptype) {
		for (i = 0; i < log->numhist; i++) {
			snprintf(file1, sizeof(file1), "%s.%d", log->logfile, i);
			if (lstat(file1, &st) != 0)
				continue;
			snprintf(file2, sizeof(file2), "%s%s", file1,
			    compress[ziptype].suffix);
			if (lstat(file2, &st) == 0)
				continue;
			log_compress(log, file1);
		}
	}

	/* Move down log files. */
	for (i = log->numhist - 1; i > 0; i--) {
		for (j = 0; j < (int)__arraycount(compress); j++) {
			snprintf(file1, sizeof(file1), "%s.%d%s", log->logfile,
			    i - 1, compress[j].suffix);
			snprintf(file2, sizeof(file2), "%s.%d%s", log->logfile,
			    i, compress[j].suffix);
			k = lstat(file1, &st);
			if (!k) break;
		}
		if (k) continue;

		PRINFO(("mv %s %s\n", file1, file2));
		if (!noaction)
			if (rename(file1, file2))
				err(EXIT_FAILURE, "%s", file1);
		PRINFO(("chmod %o %s\n", log->mode, file2));
		if (!noaction)
			if (chmod(file2, log->mode))
				err(EXIT_FAILURE, "%s", file2);
		PRINFO(("chown %d:%d %s\n", log->uid, log->gid,
		    file2));
		if (!noaction)
			if (chown(file2, log->uid, log->gid))
				err(EXIT_FAILURE, "%s", file2);
	}

	log_get_format(log);
	log_trimmed(log);

	/* Create the historical log file if we're maintaining history. */
	if (log->numhist == 0) {
		PRINFO(("rm -f %s\n", log->logfile));
		if (!noaction)
			if (unlink(log->logfile))
				err(EXIT_FAILURE, "%s", log->logfile);
	} else {
		(void)snprintf(file1, sizeof(file1), "%s.0", log->logfile);
		PRINFO(("mv %s %s\n", log->logfile, file1));
		if (!noaction)
			if (rename(log->logfile, file1))
				err(EXIT_FAILURE, "%s", log->logfile);
	}

	PRINFO(("(create new log)\n"));
	log_create(log);
	log_trimmed(log);

	/* Set the correct permissions on the log. */
	PRINFO(("chmod %o %s\n", log->mode, log->logfile));
	if (!noaction)
		if (chmod(log->logfile, log->mode))
			err(EXIT_FAILURE, "%s", log->logfile);

	/* Do we need to signal a daemon? */
	if ((log->flags & CE_NOSIGNAL) == 0) {
		if (log->pidfile[0] != '\0')
			pid = readpidfile(log->pidfile);
		else
			pid = readpidfile(_PATH_SYSLOGDPID);

		if (pid != (pid_t)-1) {
			PRINFO(("kill -%s %lu\n",
			    sys_signame[log->signum], (u_long)pid));
			if (!noaction)
				if (kill(pid, log->signum))
					warn("kill");
		}
	}

	/* If the newest historical log is to be compressed, do it here. */
	if (ziptype && !(log->flags & CE_PLAIN0) && log->numhist != 0) {
		snprintf(file1, sizeof(file1), "%s.0", log->logfile);
		if ((log->flags & CE_NOSIGNAL) == 0) {
			PRINFO(("sleep for 10 seconds before compressing...\n"));
			(void)sleep(10);
		}
		log_compress(log, file1);
	}
}

static void
log_get_format(struct conf_entry *log)
{
	FILE *fd;
	char *line;
	size_t linelen;

	if ((log->flags & CE_BINARY) != 0)
		return;
	PRINFO(("(read line format of %s)\n", log->logfile));
	if (noaction)
		return;

	if ((fd = fopen(log->logfile, "r")) == NULL)
		return;

	/* read 2nd line */
	line = fgetln(fd, &linelen);
	if ((line = fgetln(fd, &linelen)) != NULL
	  && line[10] == 'T')
		log->flags |= CE_SYSLPROTOCOL;
	(void)fclose(fd);
}

/*
 * Write an entry to the log file recording the fact that it was trimmed.
 */
static void
log_trimmed(struct conf_entry *log)
{
	FILE *fd;
	time_t now;
	const char *daytime;
	const char  trim_message[] = "log file turned over";

	if ((log->flags & CE_BINARY) != 0)
		return;
	PRINFO(("(append rotation notice to %s)\n", log->logfile));
	if (noaction)
		return;

	if ((fd = fopen(log->logfile, "at")) == NULL)
		err(EXIT_FAILURE, "%s", log->logfile);

	if ((log->flags & CE_SYSLPROTOCOL) == 0) {
		char shorthostname[MAXHOSTNAMELEN];
		char *p;

		/* Truncate domain. */
		(void)strlcpy(shorthostname, hostname, sizeof(shorthostname));
		if ((p = strchr(shorthostname, '.')) != NULL)
			*p = '\0';

		now = time(NULL);
		daytime = p = ctime(&now) + 4;
		p[15] = '\0';

		(void)fprintf(fd, "%s %s newsyslog[%lu]: %s\n",
		    daytime, hostname, (u_long)getpid(), trim_message);
	} else {
		struct tm *tmnow;
		struct timeval tv;
		char timestamp[35];
		unsigned i, j;

		if (gettimeofday(&tv, NULL) == -1) {
			daytime = "-";
		} else {
			tzset();
			now = (time_t) tv.tv_sec;
			tmnow = localtime(&now);

			i = strftime(timestamp, sizeof(timestamp),
				"%FT%T", tmnow);
			i += snprintf(timestamp+i, sizeof(timestamp)-i,
				".%06ld", (long)tv.tv_usec);
			i += j = strftime(timestamp+i, sizeof(timestamp)-i-1,
				"%z", tmnow);
			/* strftime gives eg. "+0200", but we need "+02:00" */
			if (j == 5) {
				timestamp[i+1] = timestamp[i];
				timestamp[i]   = timestamp[i-1];
				timestamp[i-1] = timestamp[i-2];
				timestamp[i-2] = ':';
				i += 1;
			}
			daytime = timestamp;
		}
		(void)fprintf(fd, "%s %s newsyslog %lu - - %s\n",
			daytime, hostname, (u_long)getpid(), trim_message);

	}
	(void)fclose(fd);
}

/*
 * Create a new log file.
 */
static void
log_create(struct conf_entry *log)
{
	int fd;

	if (noaction)
		return;

	if ((fd = creat(log->logfile, log->mode)) < 0)
		err(EXIT_FAILURE, "%s", log->logfile);
	if (fchown(fd, log->uid, log->gid) < 0)
		err(EXIT_FAILURE, "%s", log->logfile);
	(void)close(fd);
}

/*
 * Fork off gzip(1) to compress a log file.  This routine takes an
 * additional string argument (the name of the file to compress): it is also
 * used to compress historical log files other than the newest.
 */
static void
log_compress(struct conf_entry *log, const char *fn)
{
	char tmp[MAXPATHLEN];

	PRINFO(("%s %s %s\n", compress[ziptype].path, compress[ziptype].args,
	    fn));
	if (!noaction) {
		pid_t pid;
		int status;

		if ((pid = vfork()) < 0)
			err(EXIT_FAILURE, "vfork");
		else if (pid == 0) {
			(void)execl(compress[ziptype].path,
			   compress[ziptype].path, compress[ziptype].args, fn,
			   NULL);
			_exit(EXIT_FAILURE);
		}
		while (waitpid(pid, &status, 0) != pid);

		if (!WIFEXITED(status) || (WEXITSTATUS(status) != 0))
			errx(EXIT_FAILURE, "%s failed", compress[ziptype].path);
	}

	(void)snprintf(tmp, sizeof(tmp), "%s%s", fn, compress[ziptype].suffix);
	PRINFO(("chown %d:%d %s\n", log->uid, log->gid, tmp));
	if (!noaction)
		if (chown(tmp, log->uid, log->gid))
			err(EXIT_FAILURE, "%s", tmp);
}

/*
 * Display program usage information.
 */
static void
usage(void)
{

	(void)fprintf(stderr,
	    "Usage: %s [-nrsvF] [-f config-file] [file ...]\n", getprogname());
	exit(EXIT_FAILURE);
}

/*
 * Return non-zero if a string represents a decimal value.
 */
static int
isnumber(const char *string)
{

	while (isdigit((unsigned char)*string))
		string++;

	return *string == '\0';
}

/*
 * Given a signal name, attempt to find the corresponding signal number.
 */
static int
getsig(const char *sig)
{
	char *p;
	int n;

	if (isnumber(sig)) {
		n = (int)strtol(sig, &p, 0);
		if (p != '\0' || n < 0 || n >= NSIG)
			return -1;
		return n;
	}

	if (strncasecmp(sig, "SIG", 3) == 0)
		sig += 3;
	for (n = 1; n < NSIG; n++)
		if (strcasecmp(sys_signame[n], sig) == 0)
			return n;
	return -1;
}

/*
 * Given a path to a PID file, return the PID contained within.
 */
static pid_t
readpidfile(const char *file)
{
	FILE *fd;
	char line[BUFSIZ];
	pid_t pid;

#ifdef notyet
	if (file[0] != '/')
		(void)snprintf(tmp, sizeof(tmp), "%s%s", _PATH_VARRUN, file);
	else
		(void)strlcpy(tmp, file, sizeof(tmp));
#endif

	if ((fd = fopen(file, "r")) == NULL) {
		warn("%s", file);
		return (pid_t)-1;
	}

	if (fgets(line, sizeof(line) - 1, fd) != NULL) {
		line[sizeof(line) - 1] = '\0';
		pid = (pid_t)strtol(line, NULL, 0);
	} else {
		warnx("unable to read %s", file);
		pid = (pid_t)-1;
	}

	(void)fclose(fd);
	return pid;
}

/*
 * Parse a user:group specification.
 *
 * XXX This is over the top for newsyslog(8).  It should be moved to libutil.
 */
int
parse_userspec(const char *name, struct passwd **pw, struct group **gr)
{
	char buf[MAXLOGNAME * 2 + 2], *group;

	(void)strlcpy(buf, name, sizeof(buf));
	*gr = NULL;

	/*
	 * Before attempting to use '.' as a separator, see if the whole
	 * string resolves as a user name.
	 */
	if ((*pw = getpwnam(buf)) != NULL) {
		*gr = getgrgid((*pw)->pw_gid);
		return (0);
	}

	/* Split the user and group name. */
	if ((group = strchr(buf, ':')) != NULL ||
	    (group = strchr(buf, '.')) != NULL)
		*group++ = '\0';

	if (isnumber(buf))
		*pw = getpwuid((uid_t)atoi(buf));
	else
		*pw = getpwnam(buf);

	/*
	 * Find the group.  If a group wasn't specified, use the user's
	 * `natural' group.  We get to this point even if no user was found.
	 * This is to allow the caller to get a better idea of what went
	 * wrong, if anything.
	 */
	if (group == NULL || *group == '\0') {
		if (*pw == NULL)
			return -1;
		*gr = getgrgid((*pw)->pw_gid);
	} else if (isnumber(group))
		*gr = getgrgid((gid_t)atoi(group));
	else
		*gr = getgrnam(group);

	return *pw != NULL && *gr != NULL ? 0 : -1;
}

/*
 * Parse a cyclic time specification, the format is as follows:
 *
 *	[Dhh] or [Wd[Dhh]] or [Mdd[Dhh]]
 *
 * to rotate a log file cyclic at
 *
 *	- every day (D) within a specific hour (hh)	(hh = 0...23)
 *	- once a week (W) at a specific day (d)	    OR	(d = 0..6, 0 = Sunday)
 *	- once a month (M) at a specific day (d)	(d = 1..31,l|L)
 *
 * We don't accept a timezone specification; missing fields are defaulted to
 * the current date but time zero.
 */
static time_t
parse_dwm(char *s)
{
	char *t;
	struct tm tm, *tmp;
	long ul;
	time_t now;
	static int mtab[] = { 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
	int wmseen, dseen, nd, save;

	wmseen = 0;
	dseen = 0;

	now = time(NULL);
	tmp = localtime(&now);
	tm = *tmp;

	/* Set no. of days per month */
	nd = mtab[tm.tm_mon];

	if (tm.tm_mon == 1 &&
	    ((tm.tm_year + 1900) % 4 == 0) &&
	    ((tm.tm_year + 1900) % 100 != 0) &&
	    ((tm.tm_year + 1900) % 400 == 0))
		nd++;	/* leap year, 29 days in february */
	tm.tm_hour = tm.tm_min = tm.tm_sec = 0;

	for (;;) {
		switch (*s) {
		case 'D':
			if (dseen)
				return (time_t)-1;
			dseen++;
			s++;
			ul = strtol(s, &t, 10);
			if (ul > 23 || ul < 0)
				return (time_t)-1;
			tm.tm_hour = ul;
			break;

		case 'W':
			if (wmseen)
				return (time_t)-1;
			wmseen++;
			s++;
			ul = strtol(s, &t, 10);
			if (ul > 6 || ul < 0)
				return (-1);
			if (ul != tm.tm_wday) {
				if (ul < tm.tm_wday) {
					save = 6 - tm.tm_wday;
					save += (ul + 1);
				} else
					save = ul - tm.tm_wday;
				tm.tm_mday += save;

				if (tm.tm_mday > nd) {
					tm.tm_mon++;
					tm.tm_mday = tm.tm_mday - nd;
				}
			}
			break;

		case 'M':
			if (wmseen)
				return (time_t)-1;
			wmseen++;
			s++;
			if (tolower((unsigned char)*s) == 'l') {
				tm.tm_mday = nd;
				s++;
				t = s;
			} else {
				ul = strtol(s, &t, 10);
				if (ul < 1 || ul > 31)
					return (time_t)-1;

				if (ul > nd)
					return (time_t)-1;
				tm.tm_mday = ul;
			}
			break;

		default:
			return (time_t)-1;
		}

		if (*t == '\0' || isspace((unsigned char)*t))
			break;
		else
			s = t;
	}

	return mktime(&tm);
}

/*
 * Parse a limited subset of ISO 8601.	The specific format is as follows:
 *
 * [CC[YY[MM[DD]]]][THH[MM[SS]]]	(where `T' is the literal letter)
 *
 * We don't accept a timezone specification; missing fields (including
 * timezone) are defaulted to the current date but time zero.
 */
static time_t
parse_iso8601(char *s)
{
	char *t;
	struct tm tm, *tmp;
	u_long ul;
	time_t now;

	now = time(NULL);
	tmp = localtime(&now);
	tm = *tmp;

	tm.tm_hour = tm.tm_min = tm.tm_sec = 0;

	ul = strtoul(s, &t, 10);
	if (*t != '\0' && *t != 'T')
		return (time_t)-1;

	/*
	 * Now t points either to the end of the string (if no time was
	 * provided) or to the letter `T' which separates date and time in
	 * ISO 8601.  The pointer arithmetic is the same for either case.
	 */
	switch (t - s) {
	case 8:
		tm.tm_year = ((ul / 1000000) - 19) * 100;
		ul = ul % 1000000;
		/* FALLTHROUGH */
	case 6:
		tm.tm_year = tm.tm_year - (tm.tm_year % 100);
		tm.tm_year += ul / 10000;
		ul = ul % 10000;
		/* FALLTHROUGH */
	case 4:
		tm.tm_mon = (ul / 100) - 1;
		ul = ul % 100;
		/* FALLTHROUGH */
	case 2:
		tm.tm_mday = ul;
		/* FALLTHROUGH */
	case 0:
		break;
	default:
		return (time_t)-1;
	}

	/* Sanity check */
	if (tm.tm_year < 70 || tm.tm_mon < 0 || tm.tm_mon > 12 ||
	    tm.tm_mday < 1 || tm.tm_mday > 31)
		return (time_t)-1;

	if (*t != '\0') {
		s = ++t;
		ul = strtoul(s, &t, 10);
		if (*t != '\0' && !isspace((unsigned char)*t))
			return (time_t)-1;

		switch (t - s) {
		case 6:
			tm.tm_sec = ul % 100;
			ul /= 100;
			/* FALLTHROUGH */
		case 4:
			tm.tm_min = ul % 100;
			ul /= 100;
			/* FALLTHROUGH */
		case 2:
			tm.tm_hour = ul;
			/* FALLTHROUGH */
		case 0:
			break;
		default:
			return (time_t)-1;
		}

		/* Sanity check */
		if (tm.tm_sec < 0 || tm.tm_sec > 60 || tm.tm_min < 0 ||
		    tm.tm_min > 59 || tm.tm_hour < 0 || tm.tm_hour > 23)
			return (time_t)-1;
	}

	return mktime(&tm);
}