biz22.c revision 1.10 1 1.10 perry /* $NetBSD: biz22.c,v 1.10 2006/04/03 00:51:14 perry Exp $ */
2 1.3 jtc
3 1.1 cgd /*
4 1.3 jtc * Copyright (c) 1983, 1993
5 1.3 jtc * The Regents of the University of California. All rights reserved.
6 1.1 cgd *
7 1.1 cgd * Redistribution and use in source and binary forms, with or without
8 1.1 cgd * modification, are permitted provided that the following conditions
9 1.1 cgd * are met:
10 1.1 cgd * 1. Redistributions of source code must retain the above copyright
11 1.1 cgd * notice, this list of conditions and the following disclaimer.
12 1.1 cgd * 2. Redistributions in binary form must reproduce the above copyright
13 1.1 cgd * notice, this list of conditions and the following disclaimer in the
14 1.1 cgd * documentation and/or other materials provided with the distribution.
15 1.8 agc * 3. Neither the name of the University nor the names of its contributors
16 1.1 cgd * may be used to endorse or promote products derived from this software
17 1.1 cgd * without specific prior written permission.
18 1.1 cgd *
19 1.1 cgd * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
20 1.1 cgd * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21 1.1 cgd * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22 1.1 cgd * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
23 1.1 cgd * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
24 1.1 cgd * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
25 1.1 cgd * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
26 1.1 cgd * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
27 1.1 cgd * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
28 1.1 cgd * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
29 1.1 cgd * SUCH DAMAGE.
30 1.1 cgd */
31 1.1 cgd
32 1.7 lukem #include <sys/cdefs.h>
33 1.1 cgd #ifndef lint
34 1.3 jtc #if 0
35 1.3 jtc static char sccsid[] = "@(#)biz22.c 8.1 (Berkeley) 6/6/93";
36 1.3 jtc #endif
37 1.10 perry __RCSID("$NetBSD: biz22.c,v 1.10 2006/04/03 00:51:14 perry Exp $");
38 1.1 cgd #endif /* not lint */
39 1.1 cgd
40 1.1 cgd #include "tip.h"
41 1.1 cgd
42 1.1 cgd #define DISCONNECT_CMD "\20\04" /* disconnection string */
43 1.1 cgd
44 1.7 lukem static int btimeout = 0;
45 1.1 cgd static jmp_buf timeoutbuf;
46 1.1 cgd
47 1.10 perry static int biz_dialer(char *, const char *);
48 1.10 perry static int cmd(const char *);
49 1.10 perry static int detect(const char *);
50 1.10 perry static void sigALRM(int);
51 1.5 cgd
52 1.1 cgd /*
53 1.1 cgd * Dial up on a BIZCOMP Model 1022 with either
54 1.1 cgd * tone dialing (mod = "V")
55 1.1 cgd * pulse dialing (mod = "W")
56 1.1 cgd */
57 1.1 cgd static int
58 1.10 perry biz_dialer(char *num, const char *mod)
59 1.1 cgd {
60 1.7 lukem int connected = 0;
61 1.1 cgd char cbuf[40];
62 1.1 cgd
63 1.1 cgd if (boolean(value(VERBOSE)))
64 1.1 cgd printf("\nstarting call...");
65 1.1 cgd /*
66 1.1 cgd * Disable auto-answer and configure for tone/pulse
67 1.1 cgd * dialing
68 1.1 cgd */
69 1.1 cgd if (cmd("\02K\r")) {
70 1.1 cgd printf("can't initialize bizcomp...");
71 1.1 cgd return (0);
72 1.1 cgd }
73 1.6 mrg (void)strncpy(cbuf, "\02.\r", sizeof(cbuf) - 1);
74 1.1 cgd cbuf[1] = *mod;
75 1.1 cgd if (cmd(cbuf)) {
76 1.1 cgd printf("can't set dialing mode...");
77 1.1 cgd return (0);
78 1.1 cgd }
79 1.6 mrg (void)snprintf(cbuf, sizeof cbuf, "\02D%s\r", num);
80 1.1 cgd write(FD, cbuf, strlen(cbuf));
81 1.1 cgd if (!detect("7\r")) {
82 1.1 cgd printf("can't get dial tone...");
83 1.1 cgd return (0);
84 1.1 cgd }
85 1.1 cgd if (boolean(value(VERBOSE)))
86 1.1 cgd printf("ringing...");
87 1.1 cgd /*
88 1.1 cgd * The reply from the BIZCOMP should be:
89 1.1 cgd * 2 \r or 7 \r failure
90 1.1 cgd * 1 \r success
91 1.1 cgd */
92 1.1 cgd connected = detect("1\r");
93 1.1 cgd #ifdef ACULOG
94 1.7 lukem if (btimeout) {
95 1.1 cgd char line[80];
96 1.1 cgd
97 1.6 mrg (void)snprintf(line, sizeof line, "%d second dial timeout",
98 1.7 lukem (int)number(value(DIALTIMEOUT)));
99 1.1 cgd logent(value(HOST), num, "biz1022", line);
100 1.1 cgd }
101 1.1 cgd #endif
102 1.7 lukem if (btimeout)
103 1.1 cgd biz22_disconnect(); /* insurance */
104 1.1 cgd return (connected);
105 1.1 cgd }
106 1.1 cgd
107 1.7 lukem int
108 1.10 perry biz22w_dialer(char *num, char *acu)
109 1.1 cgd {
110 1.1 cgd
111 1.1 cgd return (biz_dialer(num, "W"));
112 1.1 cgd }
113 1.1 cgd
114 1.7 lukem int
115 1.10 perry biz22f_dialer(char *num, char *acu)
116 1.1 cgd {
117 1.1 cgd
118 1.1 cgd return (biz_dialer(num, "V"));
119 1.1 cgd }
120 1.1 cgd
121 1.7 lukem void
122 1.10 perry biz22_disconnect(void)
123 1.1 cgd {
124 1.1 cgd
125 1.1 cgd write(FD, DISCONNECT_CMD, 4);
126 1.1 cgd sleep(2);
127 1.4 pk tcflush(FD, TCIOFLUSH);
128 1.1 cgd }
129 1.1 cgd
130 1.7 lukem void
131 1.10 perry biz22_abort(void)
132 1.1 cgd {
133 1.1 cgd
134 1.1 cgd write(FD, "\02", 1);
135 1.1 cgd }
136 1.1 cgd
137 1.1 cgd static void
138 1.10 perry sigALRM(int dummy)
139 1.1 cgd {
140 1.1 cgd
141 1.7 lukem btimeout = 1;
142 1.1 cgd longjmp(timeoutbuf, 1);
143 1.1 cgd }
144 1.1 cgd
145 1.1 cgd static int
146 1.10 perry cmd(const char *s)
147 1.1 cgd {
148 1.1 cgd sig_t f;
149 1.1 cgd char c;
150 1.1 cgd
151 1.1 cgd write(FD, s, strlen(s));
152 1.1 cgd f = signal(SIGALRM, sigALRM);
153 1.1 cgd if (setjmp(timeoutbuf)) {
154 1.1 cgd biz22_abort();
155 1.1 cgd signal(SIGALRM, f);
156 1.1 cgd return (1);
157 1.1 cgd }
158 1.1 cgd alarm(number(value(DIALTIMEOUT)));
159 1.1 cgd read(FD, &c, 1);
160 1.1 cgd alarm(0);
161 1.1 cgd signal(SIGALRM, f);
162 1.1 cgd c &= 0177;
163 1.1 cgd return (c != '\r');
164 1.1 cgd }
165 1.1 cgd
166 1.1 cgd static int
167 1.10 perry detect(const char *s)
168 1.1 cgd {
169 1.1 cgd sig_t f;
170 1.1 cgd char c;
171 1.1 cgd
172 1.7 lukem #if __GNUC__ /* XXX pacify gcc */
173 1.7 lukem (void)&s;
174 1.7 lukem #endif
175 1.7 lukem
176 1.1 cgd f = signal(SIGALRM, sigALRM);
177 1.7 lukem btimeout = 0;
178 1.1 cgd while (*s) {
179 1.1 cgd if (setjmp(timeoutbuf)) {
180 1.1 cgd biz22_abort();
181 1.1 cgd break;
182 1.1 cgd }
183 1.1 cgd alarm(number(value(DIALTIMEOUT)));
184 1.1 cgd read(FD, &c, 1);
185 1.1 cgd alarm(0);
186 1.1 cgd c &= 0177;
187 1.1 cgd if (c != *s++)
188 1.1 cgd return (0);
189 1.1 cgd }
190 1.1 cgd signal(SIGALRM, f);
191 1.7 lukem return (btimeout == 0);
192 1.1 cgd }
193