Home | History | Annotate | Line # | Download | only in envstat
envstat.c revision 1.104
      1 /* $NetBSD: envstat.c,v 1.104 2023/06/19 03:03:11 rin Exp $ */
      2 
      3 /*-
      4  * Copyright (c) 2007, 2008 Juan Romero Pardines.
      5  * All rights reserved.
      6  *
      7  * Redistribution and use in source and binary forms, with or without
      8  * modification, are permitted provided that the following conditions
      9  * are met:
     10  * 1. Redistributions of source code must retain the above copyright
     11  *    notice, this list of conditions and the following disclaimer.
     12  * 2. Redistributions in binary form must reproduce the above copyright
     13  *    notice, this list of conditions and the following disclaimer in the
     14  *    documentation and/or other materials provided with the distribution.
     15  *
     16  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     17  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     18  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     19  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     20  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     21  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     22  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     23  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     24  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     25  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     26  */
     27 
     28 #include <sys/cdefs.h>
     29 #ifndef lint
     30 __RCSID("$NetBSD: envstat.c,v 1.104 2023/06/19 03:03:11 rin Exp $");
     31 #endif /* not lint */
     32 
     33 #include <stdio.h>
     34 #include <stdlib.h>
     35 #include <stdbool.h>
     36 #include <stdarg.h>
     37 #include <stdint.h>
     38 #include <string.h>
     39 #include <unistd.h>
     40 #include <fcntl.h>
     41 #include <err.h>
     42 #include <errno.h>
     43 #include <paths.h>
     44 #include <syslog.h>
     45 #include <sys/envsys.h>
     46 #include <sys/ioctl.h>
     47 #include <sys/types.h>
     48 #include <sys/queue.h>
     49 #include <prop/proplib.h>
     50 
     51 #include "envstat.h"
     52 #include "prog_ops.h"
     53 
     54 #define ENVSYS_DFLAG	0x00000001	/* list registered devices */
     55 #define ENVSYS_FFLAG	0x00000002	/* show temp in fahrenheit */
     56 #define ENVSYS_LFLAG	0x00000004	/* list sensors */
     57 #define ENVSYS_XFLAG	0x00000008	/* externalize dictionary */
     58 #define ENVSYS_IFLAG 	0x00000010	/* skip invalid sensors */
     59 #define ENVSYS_SFLAG	0x00000020	/* remove all properties set */
     60 #define ENVSYS_TFLAG	0x00000040	/* make statistics */
     61 #define ENVSYS_NFLAG	0x00000080	/* print value only */
     62 #define ENVSYS_KFLAG	0x00000100	/* show temp in kelvin */
     63 
     64 /* Sensors */
     65 typedef struct envsys_sensor {
     66 	SIMPLEQ_ENTRY(envsys_sensor) entries;
     67 	int32_t	cur_value;
     68 	int32_t	max_value;
     69 	int32_t	min_value;
     70 	int32_t	critmin_value;
     71 	int32_t	critmax_value;
     72 	int32_t	warnmin_value;
     73 	int32_t	warnmax_value;
     74 	char	desc[ENVSYS_DESCLEN];
     75 	char	type[ENVSYS_DESCLEN];
     76 	char	drvstate[ENVSYS_DESCLEN];
     77 	char	battcap[ENVSYS_DESCLEN];
     78 	char 	dvname[ENVSYS_DESCLEN];
     79 	bool	invalid;
     80 	bool	visible;
     81 	bool	percentage;
     82 } *sensor_t;
     83 
     84 /* Sensor statistics */
     85 typedef struct envsys_sensor_stats {
     86 	SIMPLEQ_ENTRY(envsys_sensor_stats) entries;
     87 	int32_t	max;
     88 	int32_t	min;
     89 	int32_t avg;
     90 	char	desc[ENVSYS_DESCLEN];
     91 } *sensor_stats_t;
     92 
     93 /* Device properties */
     94 typedef struct envsys_dvprops {
     95 	uint64_t	refresh_timo;
     96 	/* more members could be added in the future */
     97 } *dvprops_t;
     98 
     99 /* A simple queue to manage all sensors */
    100 static SIMPLEQ_HEAD(, envsys_sensor) sensors_list =
    101     SIMPLEQ_HEAD_INITIALIZER(sensors_list);
    102 
    103 /* A simple queue to manage statistics for all sensors */
    104 static SIMPLEQ_HEAD(, envsys_sensor_stats) sensor_stats_list =
    105     SIMPLEQ_HEAD_INITIALIZER(sensor_stats_list);
    106 
    107 static unsigned int 	interval, flags, width;
    108 static char 		*mydevname, *sensors;
    109 static bool 		statistics;
    110 static u_int		header_passes;
    111 
    112 static int 		parse_dictionary(int);
    113 static int		add_sensors(prop_dictionary_t, prop_dictionary_t, const char *, const char *);
    114 static int 		send_dictionary(FILE *);
    115 static int 		find_sensors(prop_array_t, const char *, dvprops_t);
    116 static void 		print_sensors(void);
    117 static int 		check_sensors(const char *);
    118 static int 		usage(void);
    119 
    120 static int		sysmonfd; /* fd of /dev/sysmon */
    121 
    122 int main(int argc, char **argv)
    123 {
    124 	prop_dictionary_t dict;
    125 	int c, rval = 0;
    126 	char *endptr, *configfile = NULL;
    127 	FILE *cf;
    128 
    129 	if (prog_init && prog_init() == -1)
    130 		err(1, "init failed");
    131 
    132 	setprogname(argv[0]);
    133 
    134 	while ((c = getopt(argc, argv, "c:Dd:fIi:klnrSs:Tw:Wx")) != -1) {
    135 		switch (c) {
    136 		case 'c':	/* configuration file */
    137 			configfile = optarg;
    138 			break;
    139 		case 'D':	/* list registered devices */
    140 			flags |= ENVSYS_DFLAG;
    141 			break;
    142 		case 'd':	/* show sensors of a specific device */
    143 			mydevname = optarg;
    144 			break;
    145 		case 'f':	/* display temperature in Fahrenheit */
    146 			flags |= ENVSYS_FFLAG;
    147 			break;
    148 		case 'I':	/* Skips invalid sensors */
    149 			flags |= ENVSYS_IFLAG;
    150 			break;
    151 		case 'i':	/* wait time between intervals */
    152 			interval = (unsigned int)strtoul(optarg, &endptr, 10);
    153 			if (*endptr != '\0')
    154 				errx(EXIT_FAILURE, "bad interval '%s'", optarg);
    155 			break;
    156 		case 'k':	/* display temperature in Kelvin */
    157 			flags |= ENVSYS_KFLAG;
    158 			break;
    159 		case 'l':	/* list sensors */
    160 			flags |= ENVSYS_LFLAG;
    161 			break;
    162 		case 'n':	/* print value only */
    163 			flags |= ENVSYS_NFLAG;
    164 			break;
    165 		case 'r':
    166 			/*
    167 			 * This flag is noop.. it's only here for
    168 			 * compatibility with the old implementation.
    169 			 */
    170 			break;
    171 		case 'S':
    172 			flags |= ENVSYS_SFLAG;
    173 			break;
    174 		case 's':	/* only show specified sensors */
    175 			sensors = optarg;
    176 			break;
    177 		case 'T':	/* make statistics */
    178 			flags |= ENVSYS_TFLAG;
    179 			break;
    180 		case 'w':	/* width value for the lines */
    181 			width = (unsigned int)strtoul(optarg, &endptr, 10);
    182 			if (*endptr != '\0')
    183 				errx(EXIT_FAILURE, "bad width '%s'", optarg);
    184 			break;
    185 		case 'x':	/* print the dictionary in raw format */
    186 			flags |= ENVSYS_XFLAG;
    187 			break;
    188 		case 'W':	/* No longer used, retained for compatibility */
    189 			break;
    190 		case '?':
    191 		default:
    192 			usage();
    193 			/* NOTREACHED */
    194 		}
    195 	}
    196 
    197 	argc -= optind;
    198 	argv += optind;
    199 
    200 	if (argc > 0 && (flags & ENVSYS_XFLAG) == 0)
    201 		usage();
    202 
    203 	/* Check if we want to make statistics */
    204 	if (flags & ENVSYS_TFLAG) {
    205 		if (!interval)
    206 			errx(EXIT_FAILURE,
    207 		    	    "-T cannot be used without an interval (-i)");
    208 		else
    209 			statistics = true;
    210 	}
    211 
    212 	if (mydevname && sensors)
    213 		errx(EXIT_FAILURE, "-d flag cannot be used with -s");
    214 
    215 	/* Open the device in ro mode */
    216 	if ((sysmonfd = prog_open(_PATH_SYSMON, O_RDONLY)) == -1)
    217 		err(EXIT_FAILURE, "%s", _PATH_SYSMON);
    218 
    219 	/* Print dictionary in raw mode */
    220 	if (flags & ENVSYS_XFLAG) {
    221 		rval = prop_dictionary_recv_ioctl(sysmonfd,
    222 						  ENVSYS_GETDICTIONARY,
    223 						  &dict);
    224 		if (rval)
    225 			errx(EXIT_FAILURE, "%s", strerror(rval));
    226 
    227 		if (mydevname || sensors) {
    228 			prop_dictionary_t ndict;
    229 
    230 			ndict = prop_dictionary_create();
    231 			if (ndict == NULL)
    232 				err(EXIT_FAILURE, "prop_dictionary_create");
    233 
    234 			if (mydevname) {
    235 				if (add_sensors(ndict, dict, mydevname, NULL))
    236 					err(EXIT_FAILURE, "add_sensors");
    237 			}
    238 			if (sensors) {
    239 				char *sstring, *p, *last, *s;
    240 				char *dvstring = NULL; /* XXXGCC */
    241 				unsigned count = 0;
    242 
    243 				s = strdup(sensors);
    244 				if (s == NULL)
    245 					err(EXIT_FAILURE, "strdup");
    246 
    247 				for ((p = strtok_r(s, ",", &last)); p;
    248 				     (p = strtok_r(NULL, ",", &last))) {
    249 					/* get device name */
    250 					dvstring = strtok(p, ":");
    251 					if (dvstring == NULL)
    252 						errx(EXIT_FAILURE, "missing device name");
    253 
    254 					/* get sensor description */
    255 					sstring = strtok(NULL, ":");
    256 					if (sstring == NULL)
    257 						errx(EXIT_FAILURE, "missing sensor description");
    258 
    259 					if (add_sensors(ndict, dict, dvstring, sstring))
    260 						err(EXIT_FAILURE, "add_sensors");
    261 
    262 					++count;
    263 				}
    264 				free(s);
    265 
    266 				/* in case we asked for a single sensor
    267 				 * show only the sensor dictionary
    268 				 */
    269 				if (count == 1) {
    270 					prop_object_t obj, obj2;
    271 
    272 					obj = prop_dictionary_get(ndict, dvstring);
    273 					obj2 = prop_array_get(obj, 0);
    274 					prop_object_release(ndict);
    275 					ndict = obj2;
    276 				}
    277 			}
    278 
    279 			prop_object_release(dict);
    280 			dict = ndict;
    281 		}
    282 
    283 		if (argc > 0) {
    284 			for (; argc > 0; ++argv, --argc)
    285 				config_dict_extract(dict, *argv, true);
    286 		} else
    287 			config_dict_dump(dict);
    288 
    289 	/* Remove all properties set in dictionary */
    290 	} else if (flags & ENVSYS_SFLAG) {
    291 		/* Close the ro descriptor */
    292 		(void)prog_close(sysmonfd);
    293 
    294 		/* open the fd in rw mode */
    295 		if ((sysmonfd = prog_open(_PATH_SYSMON, O_RDWR)) == -1)
    296 			err(EXIT_FAILURE, "%s", _PATH_SYSMON);
    297 
    298 		dict = prop_dictionary_create();
    299 		if (!dict)
    300 			err(EXIT_FAILURE, "prop_dictionary_create");
    301 
    302 		rval = prop_dictionary_set_bool(dict,
    303 						"envsys-remove-props",
    304 					        true);
    305 		if (!rval)
    306 			err(EXIT_FAILURE, "prop_dict_set_bool");
    307 
    308 		/* send the dictionary to the kernel now */
    309 		rval = prop_dictionary_send_ioctl(dict, sysmonfd,
    310 		    ENVSYS_REMOVEPROPS);
    311 		if (rval)
    312 			warnx("%s", strerror(rval));
    313 
    314 	/* Set properties in dictionary */
    315 	} else if (configfile) {
    316 		/*
    317 		 * Parse the configuration file.
    318 		 */
    319 		if ((cf = fopen(configfile, "r")) == NULL) {
    320 			syslog(LOG_ERR, "fopen failed: %s", strerror(errno));
    321 			errx(EXIT_FAILURE, "%s", strerror(errno));
    322 		}
    323 
    324 		rval = send_dictionary(cf);
    325 		(void)fclose(cf);
    326 
    327 	/* Show sensors with interval */
    328 	} else if (interval) {
    329 		for (;;) {
    330 			rval = parse_dictionary(sysmonfd);
    331 			if (rval)
    332 				break;
    333 
    334 			(void)fflush(stdout);
    335 			(void)sleep(interval);
    336 		}
    337 	/* Show sensors without interval */
    338 	} else {
    339 		rval = parse_dictionary(sysmonfd);
    340 	}
    341 
    342 	(void)prog_close(sysmonfd);
    343 
    344 	return rval ? EXIT_FAILURE : EXIT_SUCCESS;
    345 }
    346 
    347 static int
    348 send_dictionary(FILE *cf)
    349 {
    350 	prop_dictionary_t kdict, udict;
    351 	int error = 0;
    352 
    353 	/* Retrieve dictionary from kernel */
    354 	error = prop_dictionary_recv_ioctl(sysmonfd,
    355 	    ENVSYS_GETDICTIONARY, &kdict);
    356       	if (error)
    357 		return error;
    358 
    359 	config_parse(cf, kdict);
    360 
    361 	/*
    362 	 * Dictionary built by the parser from the configuration file.
    363 	 */
    364 	udict = config_dict_parsed();
    365 
    366 	/*
    367 	 * Close the read only descriptor and open a new one read write.
    368 	 */
    369 	(void)prog_close(sysmonfd);
    370 	if ((sysmonfd = prog_open(_PATH_SYSMON, O_RDWR)) == -1) {
    371 		error = errno;
    372 		warn("%s", _PATH_SYSMON);
    373 		return error;
    374 	}
    375 
    376 	/*
    377 	 * Send our sensor properties dictionary to the kernel then.
    378 	 */
    379 	error = prop_dictionary_send_ioctl(udict,
    380 	    sysmonfd, ENVSYS_SETDICTIONARY);
    381 	if (error)
    382 		warnx("%s", strerror(error));
    383 
    384 	prop_object_release(udict);
    385 	return error;
    386 }
    387 
    388 static sensor_stats_t
    389 find_stats_sensor(const char *desc)
    390 {
    391 	sensor_stats_t stats;
    392 
    393 	/*
    394 	 * If we matched a sensor by its description return it, otherwise
    395 	 * allocate a new one.
    396 	 */
    397 	SIMPLEQ_FOREACH(stats, &sensor_stats_list, entries)
    398 		if (strcmp(stats->desc, desc) == 0)
    399 			return stats;
    400 
    401 	stats = calloc(1, sizeof(*stats));
    402 	if (stats == NULL)
    403 		return NULL;
    404 
    405 	(void)strlcpy(stats->desc, desc, sizeof(stats->desc));
    406 	stats->min = INT32_MAX;
    407 	stats->max = INT32_MIN;
    408 	SIMPLEQ_INSERT_TAIL(&sensor_stats_list, stats, entries);
    409 
    410 	return stats;
    411 }
    412 
    413 static int
    414 add_sensors(prop_dictionary_t ndict, prop_dictionary_t dict, const char *dev, const char *sensor)
    415 {
    416 	prop_object_iterator_t iter, iter2;
    417 	prop_object_t obj, obj2, desc;
    418 	prop_array_t array, narray;
    419 	prop_dictionary_t sdict;
    420 	const char *dnp;
    421 	unsigned int capacity = 1;
    422 	uint64_t dummy;
    423 	bool found = false;
    424 
    425 	if (prop_dictionary_count(dict) == 0)
    426 		return 0;
    427 
    428 	narray = prop_dictionary_get(ndict, dev);
    429 	if (narray)
    430 		found = true;
    431 	else {
    432 		narray = prop_array_create_with_capacity(capacity);
    433 		if (!narray)
    434 			return -1;
    435 		if (!prop_dictionary_set(ndict, dev, narray)) {
    436 			prop_object_release(narray);
    437 			return -1;
    438 		}
    439 	}
    440 
    441 	iter = prop_dictionary_iterator(dict);
    442 	if (iter == NULL)
    443 		goto fail;
    444 	while ((obj = prop_object_iterator_next(iter)) != NULL) {
    445 		array = prop_dictionary_get_keysym(dict, obj);
    446 		if (prop_object_type(array) != PROP_TYPE_ARRAY)
    447 			break;
    448 
    449 		dnp = prop_dictionary_keysym_value(obj);
    450 		if (strcmp(dev, dnp))
    451 			continue;
    452 		found = true;
    453 
    454 		iter2 = prop_array_iterator(array);
    455 		while ((obj = prop_object_iterator_next(iter2)) != NULL) {
    456 			obj2 = prop_dictionary_get(obj, "device-properties");
    457 			if (obj2) {
    458 				if (!prop_dictionary_get_uint64(obj2,
    459 				    "refresh-timeout", &dummy))
    460 					continue;
    461 			}
    462 
    463 			if (sensor) {
    464 				desc = prop_dictionary_get(obj, "description");
    465 				if (desc == NULL)
    466 					continue;
    467 
    468 				if (!prop_string_equals_string(desc, sensor))
    469 					continue;
    470 			}
    471 
    472 			if (!prop_array_ensure_capacity(narray, capacity))
    473 				goto fail;
    474 
    475 			sdict = prop_dictionary_copy(obj);
    476 			if (sdict == NULL)
    477 				goto fail;
    478 			prop_array_add(narray, sdict);
    479 			++capacity;
    480 		}
    481 		prop_object_iterator_release(iter2);
    482 	}
    483 	prop_object_iterator_release(iter);
    484 
    485 	/* drop key and array when device wasn't found */
    486 	if (!found) {
    487 		prop_dictionary_remove(ndict, dev);
    488 		prop_object_release(narray);
    489 	}
    490 
    491 	return 0;
    492 
    493 fail:
    494 	prop_dictionary_remove(ndict, dev);
    495 	prop_object_release(narray);
    496 	return -1;
    497 }
    498 
    499 static int
    500 parse_dictionary(int fd)
    501 {
    502 	sensor_t sensor = NULL;
    503 	dvprops_t edp = NULL;
    504 	prop_array_t array;
    505 	prop_dictionary_t dict;
    506 	prop_object_iterator_t iter;
    507 	prop_object_t obj;
    508 	const char *dnp = NULL;
    509 	int rval = 0;
    510 
    511 	/* receive dictionary from kernel */
    512 	rval = prop_dictionary_recv_ioctl(fd, ENVSYS_GETDICTIONARY, &dict);
    513 	if (rval)
    514 		return rval;
    515 
    516 	/* No drivers registered? */
    517 	if (prop_dictionary_count(dict) == 0) {
    518 		warnx("no drivers registered");
    519 		goto out;
    520 	}
    521 
    522 	if (mydevname) {
    523 		/* -d flag specified, print sensors only for this device */
    524 		obj = prop_dictionary_get(dict, mydevname);
    525 		if (prop_object_type(obj) != PROP_TYPE_ARRAY) {
    526 			warnx("unknown device `%s'", mydevname);
    527 			rval = EINVAL;
    528 			goto out;
    529 		}
    530 
    531 		rval = find_sensors(obj, mydevname, NULL);
    532 		if (rval)
    533 			goto out;
    534 
    535 	} else {
    536 		/* print sensors for all devices registered */
    537 		iter = prop_dictionary_iterator(dict);
    538 		if (iter == NULL) {
    539 			rval = EINVAL;
    540 			goto out;
    541 		}
    542 
    543 		/* iterate over the dictionary returned by the kernel */
    544 		while ((obj = prop_object_iterator_next(iter)) != NULL) {
    545 			array = prop_dictionary_get_keysym(dict, obj);
    546 			if (prop_object_type(array) != PROP_TYPE_ARRAY) {
    547 				warnx("no sensors found");
    548 				rval = EINVAL;
    549 				goto out;
    550 			}
    551 
    552 			edp = calloc(1, sizeof(*edp));
    553 			if (!edp) {
    554 				rval = ENOMEM;
    555 				goto out;
    556 			}
    557 
    558 			dnp = prop_dictionary_keysym_value(obj);
    559 			rval = find_sensors(array, dnp, edp);
    560 			if (rval)
    561 				goto out;
    562 
    563 			if (((flags & ENVSYS_LFLAG) == 0) &&
    564 			    (flags & ENVSYS_DFLAG)) {
    565 				(void)printf("%s (checking events every ",
    566 				    dnp);
    567 				if (edp->refresh_timo == 1)
    568 					(void)printf("second)\n");
    569 				else
    570 					(void)printf("%d seconds)\n",
    571 					    (int)edp->refresh_timo);
    572 			}
    573 
    574 			free(edp);
    575 			edp = NULL;
    576 		}
    577 		prop_object_iterator_release(iter);
    578 	}
    579 
    580 	/* print sensors now */
    581 	if (sensors)
    582 		rval = check_sensors(sensors);
    583 	if ((flags & ENVSYS_LFLAG) == 0 && (flags & ENVSYS_DFLAG) == 0)
    584 		print_sensors();
    585 	if (interval && ((flags & ENVSYS_NFLAG) == 0 || sensors == NULL))
    586 		(void)printf("\n");
    587 
    588 out:
    589 	while ((sensor = SIMPLEQ_FIRST(&sensors_list))) {
    590 		SIMPLEQ_REMOVE_HEAD(&sensors_list, entries);
    591 		free(sensor);
    592 	}
    593 	if (edp)
    594 		free(edp);
    595 	prop_object_release(dict);
    596 	return rval;
    597 }
    598 
    599 static int
    600 find_sensors(prop_array_t array, const char *dvname, dvprops_t edp)
    601 {
    602 	prop_object_iterator_t iter;
    603 	prop_object_t obj, obj1, obj2;
    604 	prop_string_t state, desc = NULL;
    605 	sensor_t sensor = NULL;
    606 	sensor_stats_t stats = NULL;
    607 
    608 	iter = prop_array_iterator(array);
    609 	if (!iter)
    610 		return ENOMEM;
    611 
    612 	/* iterate over the array of dictionaries */
    613 	while ((obj = prop_object_iterator_next(iter)) != NULL) {
    614 		/* get the refresh-timeout property */
    615 		obj2 = prop_dictionary_get(obj, "device-properties");
    616 		if (obj2) {
    617 			if (!edp)
    618 				continue;
    619 			if (!prop_dictionary_get_uint64(obj2,
    620 							"refresh-timeout",
    621 							&edp->refresh_timo))
    622 				continue;
    623 		}
    624 
    625 		/* new sensor coming */
    626 		sensor = calloc(1, sizeof(*sensor));
    627 		if (sensor == NULL) {
    628 			prop_object_iterator_release(iter);
    629 			return ENOMEM;
    630 		}
    631 
    632 		/* copy device name */
    633 		(void)strlcpy(sensor->dvname, dvname, sizeof(sensor->dvname));
    634 
    635 		/* description string */
    636 		desc = prop_dictionary_get(obj, "description");
    637 		if (desc) {
    638 			/* copy description */
    639 			(void)strlcpy(sensor->desc,
    640 			    prop_string_value(desc),
    641 		    	    sizeof(sensor->desc));
    642 		} else {
    643 			free(sensor);
    644 			continue;
    645 		}
    646 
    647 		/* type string */
    648 		obj1  = prop_dictionary_get(obj, "type");
    649 		if (obj1) {
    650 			/* copy type */
    651 			(void)strlcpy(sensor->type,
    652 		    	    prop_string_value(obj1),
    653 		    	    sizeof(sensor->type));
    654 		} else {
    655 			free(sensor);
    656 			continue;
    657 		}
    658 
    659 		/* check sensor's state */
    660 		state = prop_dictionary_get(obj, "state");
    661 
    662 		/* mark sensors with invalid/unknown state */
    663 		if ((prop_string_equals_string(state, "invalid") ||
    664 		     prop_string_equals_string(state, "unknown")))
    665 			sensor->invalid = true;
    666 
    667 		/* get current drive state string */
    668 		obj1 = prop_dictionary_get(obj, "drive-state");
    669 		if (obj1) {
    670 			(void)strlcpy(sensor->drvstate,
    671 			    prop_string_value(obj1),
    672 			    sizeof(sensor->drvstate));
    673 		}
    674 
    675 		/* get current battery capacity string */
    676 		obj1 = prop_dictionary_get(obj, "battery-capacity");
    677 		if (obj1) {
    678 			(void)strlcpy(sensor->battcap,
    679 			    prop_string_value(obj1),
    680 			    sizeof(sensor->battcap));
    681 		}
    682 
    683 		/* get current value */
    684 		obj1 = prop_dictionary_get(obj, "cur-value");
    685 		if (obj1)
    686 			sensor->cur_value = prop_number_signed_value(obj1);
    687 
    688 		/* get max value */
    689 		obj1 = prop_dictionary_get(obj, "max-value");
    690 		if (obj1)
    691 			sensor->max_value = prop_number_signed_value(obj1);
    692 
    693 		/* get min value */
    694 		obj1 = prop_dictionary_get(obj, "min-value");
    695 		if (obj1)
    696 			sensor->min_value = prop_number_signed_value(obj1);
    697 
    698 		/* get percentage flag */
    699 		obj1 = prop_dictionary_get(obj, "want-percentage");
    700 		if (obj1)
    701 			sensor->percentage = prop_bool_true(obj1);
    702 
    703 		/* get critical max value if available */
    704 		obj1 = prop_dictionary_get(obj, "critical-max");
    705 		if (obj1)
    706 			sensor->critmax_value = prop_number_signed_value(obj1);
    707 
    708 		/* get maximum capacity value if available */
    709 		obj1 = prop_dictionary_get(obj, "maximum-capacity");
    710 		if (obj1)
    711 			sensor->critmax_value = prop_number_signed_value(obj1);
    712 
    713 		/* get critical min value if available */
    714 		obj1 = prop_dictionary_get(obj, "critical-min");
    715 		if (obj1)
    716 			sensor->critmin_value = prop_number_signed_value(obj1);
    717 
    718 		/* get critical capacity value if available */
    719 		obj1 = prop_dictionary_get(obj, "critical-capacity");
    720 		if (obj1)
    721 			sensor->critmin_value = prop_number_signed_value(obj1);
    722 
    723 		/* get warning max value if available */
    724 		obj1 = prop_dictionary_get(obj, "warning-max");
    725 		if (obj1)
    726 			sensor->warnmax_value = prop_number_signed_value(obj1);
    727 
    728 		/* get high capacity value if available */
    729 		obj1 = prop_dictionary_get(obj, "high-capacity");
    730 		if (obj1)
    731 			sensor->warnmax_value = prop_number_signed_value(obj1);
    732 
    733 		/* get warning min value if available */
    734 		obj1 = prop_dictionary_get(obj, "warning-min");
    735 		if (obj1)
    736 			sensor->warnmin_value = prop_number_signed_value(obj1);
    737 
    738 		/* get warning capacity value if available */
    739 		obj1 = prop_dictionary_get(obj, "warning-capacity");
    740 		if (obj1)
    741 			sensor->warnmin_value = prop_number_signed_value(obj1);
    742 
    743 		/* print sensor names if -l was given */
    744 		if (flags & ENVSYS_LFLAG) {
    745 			if (width)
    746 				(void)printf("%*s\n", width,
    747 				    prop_string_value(desc));
    748 			else
    749 				(void)printf("%s\n",
    750 				    prop_string_value(desc));
    751 		}
    752 
    753 		/* Add the sensor into the list */
    754 		SIMPLEQ_INSERT_TAIL(&sensors_list, sensor, entries);
    755 
    756 		/* Collect statistics if flag enabled */
    757 		if (statistics) {
    758 			/* ignore sensors not relevant for statistics */
    759 			if ((strcmp(sensor->type, "Indicator") == 0) ||
    760 			    (strcmp(sensor->type, "Battery charge") == 0) ||
    761 			    (strcmp(sensor->type, "Drive") == 0))
    762 				continue;
    763 
    764 			/* ignore invalid data */
    765 			if (sensor->invalid)
    766 				continue;
    767 
    768 			/* find or allocate a new statistics sensor */
    769 			stats = find_stats_sensor(sensor->desc);
    770 			if (stats == NULL) {
    771 				free(sensor);
    772 				prop_object_iterator_release(iter);
    773 				return ENOMEM;
    774 			}
    775 
    776 			/* update data */
    777 			if (sensor->cur_value > stats->max)
    778 				stats->max = sensor->cur_value;
    779 
    780 			if (sensor->cur_value < stats->min)
    781 				stats->min = sensor->cur_value;
    782 
    783 			/* compute avg value */
    784 			stats->avg =
    785 			    (sensor->cur_value + stats->max + stats->min) / 3;
    786 		}
    787 	}
    788 
    789 	/* free memory */
    790 	prop_object_iterator_release(iter);
    791 	return 0;
    792 }
    793 
    794 static int
    795 check_sensors(const char *str)
    796 {
    797 	sensor_t sensor = NULL;
    798 	char *dvstring, *sstring, *p, *last, *s;
    799 	bool sensor_found = false;
    800 
    801 	if ((s = strdup(str)) == NULL)
    802 		return errno;
    803 
    804 	/*
    805 	 * Parse device name and sensor description and find out
    806 	 * if the sensor is valid.
    807 	 */
    808 	for ((p = strtok_r(s, ",", &last)); p;
    809 	     (p = strtok_r(NULL, ",", &last))) {
    810 		/* get device name */
    811 		dvstring = strtok(p, ":");
    812 		if (dvstring == NULL) {
    813 			warnx("missing device name");
    814 			goto out;
    815 		}
    816 
    817 		/* get sensor description */
    818 		sstring = strtok(NULL, ":");
    819 		if (sstring == NULL) {
    820 			warnx("missing sensor description");
    821 			goto out;
    822 		}
    823 
    824 		SIMPLEQ_FOREACH(sensor, &sensors_list, entries) {
    825 			/* skip until we match device */
    826 			if (strcmp(dvstring, sensor->dvname))
    827 				continue;
    828 			if (strcmp(sstring, sensor->desc) == 0) {
    829 				sensor->visible = true;
    830 				sensor_found = true;
    831 				break;
    832 			}
    833 		}
    834 		if (sensor_found == false) {
    835 			warnx("unknown sensor `%s' for device `%s'",
    836 		       	    sstring, dvstring);
    837 			goto out;
    838 		}
    839 		sensor_found = false;
    840 	}
    841 
    842 	/* check if all sensors were ok, and error out if not */
    843 	SIMPLEQ_FOREACH(sensor, &sensors_list, entries)
    844 		if (sensor->visible) {
    845 			free(s);
    846 			return 0;
    847 		}
    848 
    849 	warnx("no sensors selected to display");
    850 out:
    851 	free(s);
    852 	return EINVAL;
    853 }
    854 
    855 static void
    856 print_sensors(void)
    857 {
    858 	sensor_t sensor;
    859 	sensor_stats_t stats = NULL;
    860 	size_t maxlen = 0, ilen;
    861 	double temp = 0;
    862 	const char *invalid = "N/A", *degrees, *tmpstr, *stype;
    863 	const char *a, *b, *c, *d, *e, *units;
    864 	const char *sep;
    865 	int flen;
    866 	bool nflag = (flags & ENVSYS_NFLAG) != 0;
    867 
    868 	tmpstr = stype = d = e = NULL;
    869 
    870 	/* find the longest description */
    871 	SIMPLEQ_FOREACH(sensor, &sensors_list, entries)
    872 		if (strlen(sensor->desc) > maxlen)
    873 			maxlen = strlen(sensor->desc);
    874 
    875 	if (width)
    876 		maxlen = width;
    877 
    878 	/*
    879 	 * Print a header at the bottom only once showing different
    880 	 * members if the statistics flag is set or not.
    881 	 *
    882 	 * As bonus if -s is set, only print this header every 10 iterations
    883 	 * to avoid redundancy... like vmstat(1).
    884 	 */
    885 
    886 	a = "Current";
    887 	units = "Unit";
    888 	if (statistics) {
    889 		b = "Max";
    890 		c = "Min";
    891 		d = "Avg";
    892 	} else {
    893 		b = "CritMax";
    894 		c = "WarnMax";
    895 		d = "WarnMin";
    896 		e = "CritMin";
    897 	}
    898 
    899 	if (!nflag) {
    900 		if (!sensors || (!header_passes && sensors) ||
    901 		    (header_passes == 10 && sensors)) {
    902 			if (statistics)
    903 				(void)printf("%s%*s  %9s %8s %8s %8s %6s\n",
    904 				    mydevname ? "" : "  ", (int)maxlen,
    905 				    "", a, b, c, d, units);
    906 			else
    907 				(void)printf("%s%*s  %9s %8s %8s %8s %8s %5s\n",
    908 				    mydevname ? "" : "  ", (int)maxlen,
    909 				    "", a, b, c, d, e, units);
    910 			if (sensors && header_passes == 10)
    911 				header_passes = 0;
    912 		}
    913 		if (sensors)
    914 			header_passes++;
    915 
    916 		sep = ":";
    917 		flen = 10;
    918 	} else {
    919 		sep = "";
    920 		flen = 1;
    921 	}
    922 
    923 	/* print the sensors */
    924 	SIMPLEQ_FOREACH(sensor, &sensors_list, entries) {
    925 		/* skip sensors that were not marked as visible */
    926 		if (sensors && !sensor->visible)
    927 			continue;
    928 
    929 		/* skip invalid sensors if -I is set */
    930 		if ((flags & ENVSYS_IFLAG) && sensor->invalid)
    931 			continue;
    932 
    933 		/* print device name */
    934 		if (!nflag && !mydevname) {
    935 			if (tmpstr == NULL || strcmp(tmpstr, sensor->dvname))
    936 				printf("[%s]\n", sensor->dvname);
    937 
    938 			tmpstr = sensor->dvname;
    939 		}
    940 
    941 		/* find out the statistics sensor */
    942 		if (statistics) {
    943 			stats = find_stats_sensor(sensor->desc);
    944 			if (stats == NULL) {
    945 				/* No statistics for this sensor */
    946 				continue;
    947 			}
    948 		}
    949 
    950 		if (!nflag) {
    951 			/* print sensor description */
    952 			(void)printf("%s%*.*s", mydevname ? "" : "  ",
    953 			    (int)maxlen,
    954 			    (int)maxlen, sensor->desc);
    955 		}
    956 
    957 		/* print invalid string */
    958 		if (sensor->invalid) {
    959 			(void)printf("%s%*s\n", sep, flen, invalid);
    960 			continue;
    961 		}
    962 
    963 		/*
    964 		 * Indicator and Battery charge sensors.
    965 		 */
    966 		if ((strcmp(sensor->type, "Indicator") == 0) ||
    967 		    (strcmp(sensor->type, "Battery charge") == 0)) {
    968 
    969 			(void)printf("%s%*s", sep, flen,
    970 			     sensor->cur_value ? "TRUE" : "FALSE");
    971 
    972 /* convert and print a temp value in degC, degF, or Kelvin */
    973 #define PRINTTEMP(a)						\
    974 do {								\
    975 	if (a) {						\
    976 		temp = ((a) / 1000000.0);			\
    977 		if (flags & ENVSYS_FFLAG) {			\
    978 			temp = temp * (9.0 / 5.0) - 459.67;	\
    979 			degrees = "degF";			\
    980 		} else if (flags & ENVSYS_KFLAG) {		\
    981 			degrees = "K";				\
    982 		} else {					\
    983 			temp = temp - 273.15;			\
    984 			degrees = "degC";			\
    985 		}						\
    986 		(void)printf("%*.3f", (int)ilen, temp);	\
    987 		ilen = 9;					\
    988 	} else							\
    989 		ilen += 9;					\
    990 } while (0)
    991 
    992 		/* temperatures */
    993 		} else if (strcmp(sensor->type, "Temperature") == 0) {
    994 
    995 			ilen = nflag ? 1 : 10;
    996 			degrees = "";
    997 			(void)printf("%s",sep);
    998 			PRINTTEMP(sensor->cur_value);
    999 			stype = degrees;
   1000 
   1001 			if (statistics) {
   1002 				/* show statistics if flag set */
   1003 				PRINTTEMP(stats->max);
   1004 				PRINTTEMP(stats->min);
   1005 				PRINTTEMP(stats->avg);
   1006 				ilen += 2;
   1007 			} else if (!nflag) {
   1008 				PRINTTEMP(sensor->critmax_value);
   1009 				PRINTTEMP(sensor->warnmax_value);
   1010 				PRINTTEMP(sensor->warnmin_value);
   1011 				PRINTTEMP(sensor->critmin_value);
   1012 			}
   1013 			if (!nflag)
   1014 				(void)printf("%*s", (int)ilen - 3, stype);
   1015 #undef PRINTTEMP
   1016 
   1017 		/* fans */
   1018 		} else if (strcmp(sensor->type, "Fan") == 0) {
   1019 			stype = "RPM";
   1020 
   1021 			(void)printf("%s%*u", sep, flen, sensor->cur_value);
   1022 
   1023 			ilen = 8;
   1024 			if (statistics) {
   1025 				/* show statistics if flag set */
   1026 				(void)printf(" %8u %8u %8u",
   1027 				    stats->max, stats->min, stats->avg);
   1028 				ilen += 2;
   1029 			} else if (!nflag) {
   1030 				if (sensor->critmax_value) {
   1031 					(void)printf(" %*u", (int)ilen,
   1032 					    sensor->critmax_value);
   1033 					ilen = 8;
   1034 				} else
   1035 					ilen += 9;
   1036 
   1037 				if (sensor->warnmax_value) {
   1038 					(void)printf(" %*u", (int)ilen,
   1039 					    sensor->warnmax_value);
   1040 					ilen = 8;
   1041 				} else
   1042 					ilen += 9;
   1043 
   1044 				if (sensor->warnmin_value) {
   1045 					(void)printf(" %*u", (int)ilen,
   1046 					    sensor->warnmin_value);
   1047 					ilen = 8;
   1048 				} else
   1049 					ilen += 9;
   1050 
   1051 				if (sensor->critmin_value) {
   1052 					(void)printf( " %*u", (int)ilen,
   1053 					    sensor->critmin_value);
   1054 					ilen = 8;
   1055 				} else
   1056 					ilen += 9;
   1057 
   1058 			}
   1059 
   1060 			if (!nflag)
   1061 				(void)printf(" %*s", (int)ilen - 3, stype);
   1062 
   1063 		/* integers */
   1064 		} else if (strcmp(sensor->type, "Integer") == 0) {
   1065 
   1066 			stype = "none";
   1067 
   1068 			(void)printf("%s%*d", sep, flen, sensor->cur_value);
   1069 
   1070 			ilen = 8;
   1071 
   1072 /* Print percentage of max_value */
   1073 #define PRINTPCT(a)							\
   1074 do {									\
   1075 	if (sensor->max_value) {					\
   1076 		(void)printf(" %*.3f%%", (int)ilen,			\
   1077 			((a) * 100.0) / sensor->max_value);		\
   1078 		ilen = 8;						\
   1079 	} else								\
   1080 		ilen += 9;						\
   1081 } while ( /* CONSTCOND*/ 0 )
   1082 
   1083 /* Print an integer sensor value */
   1084 #define PRINTINT(a)							\
   1085 do {									\
   1086 	(void)printf(" %*u", (int)ilen, (a));				\
   1087 	ilen = 8;							\
   1088 } while ( /* CONSTCOND*/ 0 )
   1089 
   1090 			if (statistics) {
   1091 				if (sensor->percentage) {
   1092 					PRINTPCT(stats->max);
   1093 					PRINTPCT(stats->min);
   1094 					PRINTPCT(stats->avg);
   1095 				} else {
   1096 					PRINTINT(stats->max);
   1097 					PRINTINT(stats->min);
   1098 					PRINTINT(stats->avg);
   1099 				}
   1100 				ilen += 2;
   1101 			} else if (!nflag) {
   1102 				if (sensor->percentage) {
   1103 					PRINTPCT(sensor->critmax_value);
   1104 					PRINTPCT(sensor->warnmax_value);
   1105 					PRINTPCT(sensor->warnmin_value);
   1106 					PRINTPCT(sensor->critmin_value);
   1107 				} else {
   1108 					PRINTINT(sensor->critmax_value);
   1109 					PRINTINT(sensor->warnmax_value);
   1110 					PRINTINT(sensor->warnmin_value);
   1111 					PRINTINT(sensor->critmin_value);
   1112 				}
   1113 			}
   1114 
   1115 			if (!nflag)
   1116 				(void)printf("%*s", (int)ilen - 3, stype);
   1117 
   1118 #undef PRINTINT
   1119 #undef PRINTPCT
   1120 
   1121 		/* drives  */
   1122 		} else if (strcmp(sensor->type, "Drive") == 0) {
   1123 
   1124 			(void)printf("%s%*s", sep, flen, sensor->drvstate);
   1125 
   1126 		/* Battery capacity */
   1127 		} else if (strcmp(sensor->type, "Battery capacity") == 0) {
   1128 
   1129 			(void)printf("%s%*s", sep, flen, sensor->battcap);
   1130 
   1131 		/* Illuminance */
   1132 		} else if (strcmp(sensor->type, "Illuminance") == 0) {
   1133 
   1134 			stype = "lux";
   1135 
   1136 			(void)printf("%s%*u", sep, flen, sensor->cur_value);
   1137 
   1138 			ilen = 8;
   1139 			if (statistics) {
   1140 				/* show statistics if flag set */
   1141 				(void)printf(" %8u %8u %8u",
   1142 				    stats->max, stats->min, stats->avg);
   1143 				ilen += 2;
   1144 			} else if (!nflag) {
   1145 				if (sensor->critmax_value) {
   1146 					(void)printf(" %*u", (int)ilen,
   1147 					    sensor->critmax_value);
   1148 					ilen = 8;
   1149 				} else
   1150 					ilen += 9;
   1151 
   1152 				if (sensor->warnmax_value) {
   1153 					(void)printf(" %*u", (int)ilen,
   1154 					    sensor->warnmax_value);
   1155 					ilen = 8;
   1156 				} else
   1157 					ilen += 9;
   1158 
   1159 				if (sensor->warnmin_value) {
   1160 					(void)printf(" %*u", (int)ilen,
   1161 					    sensor->warnmin_value);
   1162 					ilen = 8;
   1163 				} else
   1164 					ilen += 9;
   1165 
   1166 				if (sensor->critmin_value) {
   1167 					(void)printf( " %*u", (int)ilen,
   1168 					    sensor->critmin_value);
   1169 					ilen = 8;
   1170 				} else
   1171 					ilen += 9;
   1172 
   1173 			}
   1174 
   1175 			if (!nflag)
   1176 				(void)printf(" %*s", (int)ilen - 3, stype);
   1177 
   1178 		/* Pressure */
   1179 		} else if (strcmp(sensor->type, "pressure") == 0) {
   1180 			stype = "hPa";
   1181 
   1182 			(void)printf("%s%*.3f", sep, flen,
   1183 			    sensor->cur_value / 10000.0);
   1184 
   1185 			ilen = 8;
   1186 			if (statistics) {
   1187 				/* show statistics if flag set */
   1188 				(void)printf("  %.3f  %.3f  %.3f",
   1189 				    stats->max / 10000.0, stats->min / 10000.0, stats->avg / 10000.0);
   1190 				ilen += 2;
   1191 			} else if (!nflag) {
   1192 				if (sensor->critmax_value) {
   1193 					(void)printf(" %*u", (int)ilen,
   1194 					    sensor->critmax_value);
   1195 					ilen = 8;
   1196 				} else
   1197 					ilen += 9;
   1198 
   1199 				if (sensor->warnmax_value) {
   1200 					(void)printf(" %*u", (int)ilen,
   1201 					    sensor->warnmax_value);
   1202 					ilen = 8;
   1203 				} else
   1204 					ilen += 9;
   1205 
   1206 				if (sensor->warnmin_value) {
   1207 					(void)printf(" %*u", (int)ilen,
   1208 					    sensor->warnmin_value);
   1209 					ilen = 8;
   1210 				} else
   1211 					ilen += 9;
   1212 
   1213 				if (sensor->critmin_value) {
   1214 					(void)printf( " %*u", (int)ilen,
   1215 					    sensor->critmin_value);
   1216 					ilen = 8;
   1217 				} else
   1218 					ilen += 9;
   1219 
   1220 			}
   1221 
   1222 			if (!nflag)
   1223 				(void)printf(" %*s", (int)ilen - 3, stype);
   1224 
   1225 		/* everything else */
   1226 		} else {
   1227 			if (strcmp(sensor->type, "Voltage DC") == 0)
   1228 				stype = "V";
   1229 			else if (strcmp(sensor->type, "Voltage AC") == 0)
   1230 				stype = "VAC";
   1231 			else if (strcmp(sensor->type, "Ampere") == 0)
   1232 				stype = "A";
   1233 			else if (strcmp(sensor->type, "Watts") == 0)
   1234 				stype = "W";
   1235 			else if (strcmp(sensor->type, "Ohms") == 0)
   1236 				stype = "Ohms";
   1237 			else if (strcmp(sensor->type, "Watt hour") == 0)
   1238 				stype = "Wh";
   1239 			else if (strcmp(sensor->type, "Ampere hour") == 0)
   1240 				stype = "Ah";
   1241 			else if (strcmp(sensor->type, "relative Humidity") == 0)
   1242 				stype = "%rH";
   1243 			else
   1244 				stype = "?";
   1245 
   1246 			(void)printf("%s%*.3f", sep, flen,
   1247 			    sensor->cur_value / 1000000.0);
   1248 
   1249 			ilen = 9;
   1250 
   1251 /* Print percentage of max_value */
   1252 #define PRINTPCT(a)							\
   1253 do {									\
   1254 	if ((a) && sensor->max_value) {					\
   1255 		(void)printf("%*.3f%%", (int)ilen,			\
   1256 			((a) * 100.0) / sensor->max_value);		\
   1257 		ilen = 8;						\
   1258 	} else								\
   1259 		ilen += 9;						\
   1260 } while ( /* CONSTCOND*/ 0 )
   1261 
   1262 /* Print a generic sensor value */
   1263 #define PRINTVAL(a)							\
   1264 do {									\
   1265 	if ((a)) {							\
   1266 		(void)printf("%*.3f", (int)ilen, (a) / 1000000.0);	\
   1267 		ilen = 9;						\
   1268 	} else								\
   1269 		ilen += 9;						\
   1270 } while ( /* CONSTCOND*/ 0 )
   1271 
   1272 			if (statistics) {
   1273 				if (sensor->percentage) {
   1274 					PRINTPCT(stats->max);
   1275 					PRINTPCT(stats->min);
   1276 					PRINTPCT(stats->avg);
   1277 				} else {
   1278 					PRINTVAL(stats->max);
   1279 					PRINTVAL(stats->min);
   1280 					PRINTVAL(stats->avg);
   1281 				}
   1282 				ilen += 2;
   1283 			} else if (!nflag) {
   1284 				if (sensor->percentage) {
   1285 					PRINTPCT(sensor->critmax_value);
   1286 					PRINTPCT(sensor->warnmax_value);
   1287 					PRINTPCT(sensor->warnmin_value);
   1288 					PRINTPCT(sensor->critmin_value);
   1289 				} else {
   1290 
   1291 					PRINTVAL(sensor->critmax_value);
   1292 					PRINTVAL(sensor->warnmax_value);
   1293 					PRINTVAL(sensor->warnmin_value);
   1294 					PRINTVAL(sensor->critmin_value);
   1295 				}
   1296 			}
   1297 #undef PRINTPCT
   1298 #undef PRINTVAL
   1299 
   1300 			if (!nflag) {
   1301 				(void)printf(" %*s", (int)ilen - 4, stype);
   1302 				if (sensor->percentage && sensor->max_value) {
   1303 					(void)printf(" (%5.2f%%)",
   1304 					    (sensor->cur_value * 100.0) /
   1305 					    sensor->max_value);
   1306 				}
   1307 			}
   1308 		}
   1309 		(void)printf("\n");
   1310 	}
   1311 }
   1312 
   1313 static int
   1314 usage(void)
   1315 {
   1316 	(void)fprintf(stderr, "Usage: %s [-DfIklnrST] ", getprogname());
   1317 	(void)fprintf(stderr, "[-c file] [-d device] [-i interval] ");
   1318 	(void)fprintf(stderr, "[-s device:sensor,...] [-w width]\n");
   1319 	(void)fprintf(stderr, "       %s ", getprogname());
   1320 	(void)fprintf(stderr, "[-d device] ");
   1321 	(void)fprintf(stderr, "[-s device:sensor,...] ");
   1322 	(void)fprintf(stderr, "-x [property]\n");
   1323 	exit(EXIT_FAILURE);
   1324 	/* NOTREACHED */
   1325 }
   1326