md.c revision 1.30 1 /* $NetBSD: md.c,v 1.30 2020/02/06 10:47:33 martin Exp $ */
2
3 /*
4 * Copyright 1997 Piermont Information Systems Inc.
5 * All rights reserved.
6 *
7 * Based on code written by Philip A. Nelson for Piermont Information
8 * Systems Inc.
9 *
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
12 * are met:
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in the
17 * documentation and/or other materials provided with the distribution.
18 * 3. The name of Piermont Information Systems Inc. may not be used to endorse
19 * or promote products derived from this software without specific prior
20 * written permission.
21 *
22 * THIS SOFTWARE IS PROVIDED BY PIERMONT INFORMATION SYSTEMS INC. ``AS IS''
23 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25 * ARE DISCLAIMED. IN NO EVENT SHALL PIERMONT INFORMATION SYSTEMS INC. BE
26 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
29 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
30 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
31 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
32 * THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35 /* md.c -- i386 machine specific routines - also used by amd64 */
36
37 #include <sys/param.h>
38 #include <sys/sysctl.h>
39 #include <sys/exec.h>
40 #include <sys/utsname.h>
41 #include <sys/types.h>
42 #include <sys/stat.h>
43 #include <machine/cpu.h>
44 #include <assert.h>
45 #include <stdio.h>
46 #include <stddef.h>
47 #include <util.h>
48 #include <dirent.h>
49 #include <termios.h>
50
51 #include "defs.h"
52 #include "md.h"
53 #include "endian.h"
54 #include "msg_defs.h"
55 #include "menu_defs.h"
56
57 #ifdef NO_LBA_READS /* for testing */
58 #undef BIFLAG_EXTINT13
59 #define BIFLAG_EXTINT13 0
60 #endif
61
62 static struct biosdisk_info *biosdisk = NULL;
63 static bool uefi_boot;
64
65 /* prototypes */
66
67 static bool get_bios_info(const char*, struct disk_partitions*, int*, int*, int*);
68 static int mbr_root_above_chs(void);
69 static int md_read_bootcode(const char *, struct mbr_sector *);
70 static unsigned int get_bootmodel(void);
71
72 static int conmib[] = { CTL_MACHDEP, CPU_CONSDEV };
73
74 #define BOOT_PART (128*(MEG/512))
75 #define BOOT_PART_TYPE PT_EFI_SYSTEM
76
77 static const char * uefi_bootloaders[] = {
78 "/usr/mdec/bootia32.efi",
79 "/usr/mdec/bootx64.efi",
80 };
81
82 void
83 md_init(void)
84 {
85 char boot_method[100];
86 size_t len;
87
88 len = sizeof(boot_method);
89 if (sysctlbyname("machdep.bootmethod", boot_method, &len, NULL, 0)
90 != -1) {
91 if (strcmp(boot_method, "BIOS") == 0)
92 uefi_boot = false;
93 else if (strcmp(boot_method, "UEFI") == 0)
94 uefi_boot = true;
95 }
96 }
97
98 void
99 md_init_set_status(int flags)
100 {
101 (void)flags;
102
103 /* Default to install same type of kernel as we are running */
104 set_kernel_set(get_bootmodel());
105 }
106
107 bool
108 md_get_info(struct install_partition_desc *install)
109 {
110 int bcyl = 0, bhead = 0, bsec = 0;
111
112 if (pm->no_mbr || pm->no_part)
113 return true;
114
115 if (pm->parts == NULL) {
116
117 const struct disk_partitioning_scheme *ps =
118 select_part_scheme(pm, NULL, true, NULL);
119
120 if (!ps)
121 return false;
122
123 struct disk_partitions *parts =
124 (*ps->create_new_for_disk)(pm->diskdev,
125 0, pm->dlsize, true, NULL);
126 if (!parts)
127 return false;
128
129 pm->parts = parts;
130 if (ps->size_limit > 0 && pm->dlsize > ps->size_limit)
131 pm->dlsize = ps->size_limit;
132 }
133
134 if (get_bios_info(pm->diskdev, pm->parts, &bcyl, &bhead, &bsec)
135 && pm->parts->pscheme->change_disk_geom != NULL)
136 pm->parts->pscheme->change_disk_geom(pm->parts,
137 bcyl, bhead, bsec);
138 else
139 set_default_sizemult(pm->diskdev, MEG, pm->sectorsize);
140
141 /*
142 * If the selected scheme does not need two-stage partitioning
143 * (like GPT), do not bother to edit the outer partitions.
144 */
145 if (pm->parts->pscheme->secondary_partitions == NULL ||
146 pm->parts->pscheme->secondary_scheme == NULL)
147 return true;
148
149 if (pm->no_mbr || pm->no_part)
150 return true;
151
152 return edit_outer_parts(pm->parts);
153 }
154
155 /*
156 * md back-end code for menu-driven BSD disklabel editor.
157 */
158 bool
159 md_make_bsd_partitions(struct install_partition_desc *install)
160 {
161 return make_bsd_partitions(install);
162 }
163
164 /*
165 * any additional partition validation
166 */
167 bool
168 md_check_partitions(struct install_partition_desc *install)
169 {
170 int rval;
171 char *bootxx;
172
173 /* if booting via UEFI no boot blocks are needed */
174 if (uefi_boot)
175 return true;
176
177 /* check we have boot code for the root partition type */
178 bootxx = bootxx_name(install);
179 rval = access(bootxx, R_OK);
180 free(bootxx);
181 if (rval == 0)
182 return true;
183 process_menu(MENU_ok, __UNCONST(MSG_No_Bootcode));
184 return false;
185 }
186
187 /*
188 * hook called before writing new disklabel.
189 */
190 bool
191 md_pre_disklabel(struct install_partition_desc *install,
192 struct disk_partitions *parts)
193 {
194
195 if (parts->parent == NULL)
196 return true; /* no outer partitions */
197
198 parts = parts->parent;
199
200 msg_display_subst(MSG_dofdisk, 3, parts->disk,
201 msg_string(parts->pscheme->name),
202 msg_string(parts->pscheme->short_name));
203
204 /* write edited "MBR" onto disk. */
205 if (!parts->pscheme->write_to_disk(parts)) {
206 msg_display(MSG_wmbrfail);
207 process_menu(MENU_ok, NULL);
208 return false;
209 }
210 return true;
211 }
212
213 /*
214 * hook called after writing disklabel to new target disk.
215 */
216 bool
217 md_post_disklabel(struct install_partition_desc *install,
218 struct disk_partitions *parts)
219 {
220 return true;
221 }
222
223 /*
224 * Do all legacy bootblock update/setup here
225 */
226 static int
227 md_post_newfs_bios(struct install_partition_desc *install)
228 {
229 int ret;
230 size_t len;
231 char boot_options[1024];
232 char *bootxx_filename;
233 /*
234 * XXX - this code retains a lot of cruft from when we went
235 * to great pains to exclude installboot from the ramdisk
236 * for size reasons and should be rewritten.
237 */
238 static const char *consoles[]={
239 "pc", /* CONSDEV_PC */
240 "com0", /* CONSDEV_COM0 */
241 "com1", /* CONSDEV_COM1 */
242 "com2", /* CONSDEV_COM2 */
243 "com3", /* CONSDEV_COM3 */
244 "com0kbd", /* CONSDEV_COM0KBD */
245 "com1kbd", /* CONSDEV_COM1KBD */
246 "com2kbd", /* CONSDEV_COM2KBD */
247 "com3kbd" /* CONSDEV_COM3KBD */ };
248 static struct x86_boot_params boottype =
249 {sizeof boottype, 0, 5, 0, 9600, { '\0' }, "", 0};
250 struct termios t;
251 dev_t condev;
252
253 if (pm == NULL || !pm->no_part) {
254 /*
255 * Get console device, should either be ttyE0 or tty0n.
256 * Too hard to double check, so just 'know' the device numbers.
257 */
258 len = sizeof condev;
259 if (sysctl(conmib, __arraycount(conmib), &condev, &len, NULL,
260 0) != -1 && (condev & ~3) == 0x800) {
261 /* Motherboard serial port */
262 boottype.bp_consdev = (condev & 3) + 1;
263 /* Defaulting the baud rate to that of stdin should
264 suffice */
265 if (tcgetattr(0, &t) != -1)
266 boottype.bp_conspeed = t.c_ispeed;
267 }
268
269 process_menu(MENU_getboottype, &boottype);
270 msg_fmt_display(MSG_dobootblks, "%s", pm->diskdev);
271 if (boottype.bp_consdev == ~0u)
272 /* Use existing bootblocks */
273 return 0;
274 }
275
276 ret = cp_to_target("/usr/mdec/boot", "/boot");
277 if (ret)
278 return ret;
279 if (pm && pm->no_part)
280 return 0;
281
282 bootxx_filename = bootxx_name(install);
283 if (bootxx_filename != NULL) {
284 char rdev[PATH_MAX];
285
286 install->infos[0].parts->pscheme->get_part_device(
287 install->infos[0].parts, install->infos[0].cur_part_id,
288 rdev, sizeof rdev, NULL, raw_dev_name, true, true);
289
290 snprintf(boot_options, sizeof boot_options,
291 "console=%s,speed=%u", consoles[boottype.bp_consdev],
292 boottype.bp_conspeed);
293 ret = run_program(RUN_DISPLAY,
294 "/usr/sbin/installboot -f -o %s %s %s",
295 boot_options, rdev, bootxx_filename);
296 free(bootxx_filename);
297 } else {
298 ret = -1;
299 }
300
301 if (ret != 0)
302 process_menu(MENU_ok,
303 __UNCONST("Warning: disk is probably not bootable"));
304
305 return ret;
306 }
307
308 /*
309 * Make sure our bootloader(s) are in the proper directory in the boot
310 * boot partition (or update them).
311 */
312 static int
313 copy_uefi_boot(const struct part_usage_info *boot)
314 {
315 char dev[MAXPATHLEN], path[MAXPATHLEN];
316 size_t i;
317 int err;
318
319 if (!boot->parts->pscheme->get_part_device(boot->parts,
320 boot->cur_part_id, dev, sizeof(dev), NULL, plain_name, true, true))
321 return -1;
322
323 /*
324 * We should have a valid file system on that partition.
325 * Try to mount it and check if there is a /EFI in there.
326 */
327 if (boot->mount[0])
328 strlcpy(path, boot->mount, sizeof(path));
329 else
330 strcpy(path, "/mnt");
331
332 if (!(boot->instflags & PUIINST_MOUNT)) {
333 make_target_dir(path);
334 err = target_mount("", dev, path);
335 if (err != 0)
336 return err;
337 }
338
339 strlcat(path, "/EFI/boot", sizeof(path));
340 make_target_dir(path);
341
342 for (i = 0; i < __arraycount(uefi_bootloaders); i++) {
343 if (access(uefi_bootloaders[i], R_OK) != 0)
344 continue;
345 err = cp_to_target(uefi_bootloaders[i], path);
346 if (err)
347 return err;
348 }
349
350 return 0;
351 }
352
353 /*
354 * Find (U)EFI boot partition and install/update bootloaders
355 */
356 static int
357 md_post_newfs_uefi(struct install_partition_desc *install)
358 {
359 size_t i;
360
361 for (i = 0; i < install->num; i++) {
362 if (!(install->infos[i].instflags & PUIINST_BOOT))
363 continue;
364
365 return copy_uefi_boot(&install->infos[i]);
366 }
367
368 return -1; /* no EFI boot partition found */
369 }
370
371 /*
372 * hook called after upgrade() or install() has finished setting
373 * up the target disk but immediately before the user is given the
374 * ``disks are now set up'' message.
375 */
376 int
377 md_post_newfs(struct install_partition_desc *install)
378 {
379
380 return uefi_boot ? md_post_newfs_uefi(install)
381 : md_post_newfs_bios(install);
382 }
383
384 int
385 md_post_extract(struct install_partition_desc *install)
386 {
387 #if defined(__amd64__)
388 if (get_kernel_set() == SET_KERNEL_2) {
389 int ret;
390
391 ret = cp_within_target("/usr/mdec/prekern", "/prekern", 0);
392 if (ret)
393 return ret;
394 }
395 #endif
396 return 0;
397 }
398
399 void
400 md_cleanup_install(struct install_partition_desc *install)
401 {
402 size_t len;
403 dev_t condev;
404
405 #ifndef DEBUG
406 enable_rc_conf();
407 add_rc_conf("wscons=YES\n");
408
409 # if defined(__i386__) && defined(SET_KERNEL_TINY)
410 /*
411 * For GENERIC_TINY, do not enable any extra screens or wsmux.
412 * Otherwise, run getty on 4 VTs.
413 */
414 if (get_kernel_set() == SET_KERNEL_TINY)
415 run_program(RUN_CHROOT,
416 "sed -an -e '/^screen/s/^/#/;/^mux/s/^/#/;"
417 "H;$!d;g;w /etc/wscons.conf' /etc/wscons.conf");
418 else
419 # endif
420 run_program(RUN_CHROOT,
421 "sed -an -e '/^ttyE[1-9]/s/off/on/;"
422 "H;$!d;g;w /etc/ttys' /etc/ttys");
423
424 #endif
425
426 /*
427 * Get console device, should either be ttyE0 or tty0n.
428 * Too hard to double check, so just 'know' the device numbers.
429 */
430 len = sizeof condev;
431 if (sysctl(conmib, __arraycount(conmib), &condev, &len, NULL, 0) != -1
432 && (condev & ~3) != 0x800) {
433
434 /*
435 * Current console is not com*, assume ttyE*.
436 * Modify /etc/ttys to use wsvt25 for all ports.
437 */
438
439 run_program(RUN_CHROOT,
440 "sed -an -e 's/vt100/wsvt25/g;"
441 "H;$!d;g;w /etc/ttys' /etc/ttys");
442 }
443 }
444
445 int
446 md_pre_update(struct install_partition_desc *install)
447 {
448 return 1;
449 }
450
451 /* Upgrade support */
452 int
453 md_update(struct install_partition_desc *install)
454 {
455 md_post_newfs(install);
456 return 1;
457 }
458
459 int
460 md_check_mbr(struct disk_partitions *parts, mbr_info_t *mbri, bool quiet)
461 {
462 mbr_info_t *ext;
463 struct mbr_partition *p;
464 const char *bootcode;
465 int i, names, fl, ofl;
466 #define ACTIVE_FOUND 0x0100
467 #define NETBSD_ACTIVE 0x0200
468 #define NETBSD_NAMED 0x0400
469 #define ACTIVE_NAMED 0x0800
470
471 root_limit = 0;
472 if (biosdisk != NULL && (biosdisk->bi_flags & BIFLAG_EXTINT13) == 0) {
473 if (mbr_root_above_chs()) {
474 if (quiet)
475 return 0;
476 msg_display(MSG_partabovechs);
477 if (!ask_noyes(NULL))
478 return 1;
479 /* The user is shooting themselves in the foot here...*/
480 } else {
481 if (parts->pscheme->size_limit)
482 root_limit = min(parts->pscheme->size_limit,
483 parts->disk_size);
484 else
485 root_limit = parts->disk_size;
486 }
487 }
488
489 /*
490 * Ensure the install partition (at sector pm->ptstart) and the active
491 * partition are bootable.
492 * Determine whether the bootselect code is needed.
493 * Note that MBR_BS_NEWMBR is always set, so we ignore it!
494 */
495 fl = 0;
496 names = 0;
497 for (ext = mbri; ext != NULL; ext = ext->extended) {
498 p = ext->mbr.mbr_parts;
499 for (i = 0; i < MBR_PART_COUNT; p++, i++) {
500 if (p->mbrp_flag == MBR_PFLAG_ACTIVE) {
501 fl |= ACTIVE_FOUND;
502 if (ext->sector + p->mbrp_start == pm->ptstart)
503 fl |= NETBSD_ACTIVE;
504 }
505 if (ext->mbrb.mbrbs_nametab[i][0] == 0) {
506 /* No bootmenu label... */
507 if (ext->sector == 0)
508 continue;
509 if (ext->sector + p->mbrp_start == pm->ptstart)
510 /*
511 * Have installed into an extended ptn
512 * force name & bootsel...
513 */
514 names++;
515 continue;
516 }
517 /* Partition has a bootmenu label... */
518 if (ext->sector != 0)
519 fl |= MBR_BS_EXTLBA;
520 if (ext->sector + p->mbrp_start == pm->ptstart)
521 fl |= NETBSD_NAMED;
522 else if (p->mbrp_flag == MBR_PFLAG_ACTIVE)
523 fl |= ACTIVE_NAMED;
524 else
525 names++;
526 }
527 }
528 if (!(fl & ACTIVE_FOUND))
529 fl |= NETBSD_ACTIVE;
530 if (fl & NETBSD_NAMED && fl & NETBSD_ACTIVE)
531 fl |= ACTIVE_NAMED;
532
533 if ((names > 0 || !(fl & NETBSD_ACTIVE)) &&
534 (!(fl & NETBSD_NAMED) || !(fl & ACTIVE_NAMED))) {
535 /*
536 * There appear to be multiple bootable partitions, but they
537 * don't all have bootmenu texts.
538 */
539 if (quiet)
540 return 0;
541
542 msg_display(MSG_missing_bootmenu_text);
543 if (ask_yesno(NULL))
544 return 1;
545 }
546
547 if ((fl & MBR_BS_EXTLBA) &&
548 (biosdisk == NULL || !(biosdisk->bi_flags & BIFLAG_EXTINT13))) {
549 /* Need unsupported LBA reads to read boot sectors */
550 if (quiet)
551 return 0;
552
553 msg_display(MSG_no_extended_bootmenu);
554 if (!ask_noyes(NULL))
555 return 1;
556 }
557
558 /* Sort out the name of the mbr code we need */
559 if (names > 0 || fl & (NETBSD_NAMED | ACTIVE_NAMED)) {
560 /* Need bootselect code */
561 fl |= MBR_BS_ACTIVE;
562 bootcode = fl & MBR_BS_EXTLBA ? _PATH_BOOTEXT : _PATH_BOOTSEL;
563 } else
564 bootcode = _PATH_MBR;
565
566 fl &= MBR_BS_ACTIVE | MBR_BS_EXTLBA;
567
568 /* Look at what is installed */
569 ofl = mbri->mbrb.mbrbs_flags;
570 if (ofl == 0) {
571 /* Check there is some bootcode at all... */
572 if (mbri->mbr.mbr_magic != htole16(MBR_MAGIC) ||
573 mbri->mbr.mbr_jmpboot[0] == 0 ||
574 mbr_root_above_chs())
575 /* Existing won't do, force update */
576 fl |= MBR_BS_NEWMBR;
577 }
578 ofl = mbri->oflags & (MBR_BS_ACTIVE | MBR_BS_EXTLBA);
579
580 if (!quiet) {
581 if (fl & ~ofl || (fl == 0 && ofl & MBR_BS_ACTIVE)) {
582 /* Existing boot code isn't the right one... */
583 if (fl & MBR_BS_ACTIVE)
584 msg_display(MSG_installbootsel);
585 else
586 msg_display(MSG_installmbr);
587 } else
588 /* Existing code would (probably) be ok */
589 msg_display(MSG_updatembr);
590
591 if (!ask_yesno(NULL))
592 /* User doesn't want to update mbr code */
593 return 2;
594 }
595
596 if (md_read_bootcode(bootcode, &mbri->mbr) == 0)
597 /* update suceeded - to memory copy */
598 return 2;
599
600 /* This shouldn't happen since the files are in the floppy fs... */
601 msg_fmt_display("Can't find %s", "%s", bootcode);
602 return ask_reedit(parts);
603 }
604
605 bool
606 md_parts_use_wholedisk(struct disk_partitions *parts)
607 {
608 struct disk_part_info boot_part = {
609 .size = BOOT_PART,
610 .fs_type = FS_MSDOS, .fs_sub_type = MBR_PTYPE_FAT32L,
611 };
612
613 if (!uefi_boot)
614 return parts_use_wholedisk(parts, 0, NULL);
615
616 boot_part.nat_type = parts->pscheme->get_generic_part_type(
617 PT_EFI_SYSTEM);
618
619 return parts_use_wholedisk(parts, 1, &boot_part);
620 }
621
622 static bool
623 get_bios_info(const char *dev, struct disk_partitions *parts, int *bcyl,
624 int *bhead, int *bsec)
625 {
626 static struct disklist *disklist = NULL;
627 static int mib[2] = {CTL_MACHDEP, CPU_DISKINFO};
628 int i;
629 size_t len;
630 struct biosdisk_info *bip;
631 struct nativedisk_info *nip = NULL, *nat;
632 int cyl, head, sec;
633
634 if (disklist == NULL) {
635 if (sysctl(mib, 2, NULL, &len, NULL, 0) < 0)
636 goto nogeom;
637 disklist = malloc(len);
638 if (disklist == NULL) {
639 fprintf(stderr, "Out of memory\n");
640 return false;
641 }
642 sysctl(mib, 2, disklist, &len, NULL, 0);
643 }
644
645 for (i = 0; i < disklist->dl_nnativedisks; i++) {
646 nat = &disklist->dl_nativedisks[i];
647 if (!strcmp(dev, nat->ni_devname)) {
648 nip = nat;
649 break;
650 }
651 }
652 if (nip == NULL || nip->ni_nmatches == 0) {
653 nogeom:
654 if (nip != NULL)
655 msg_fmt_display(MSG_nobiosgeom, "%d%d%d",
656 pm->dlcyl, pm->dlhead, pm->dlsec);
657 if (guess_biosgeom_from_parts(parts, &cyl, &head, &sec) >= 0
658 && nip != NULL)
659 {
660 msg_fmt_display_add(MSG_biosguess, "%d%d%d",
661 cyl, head, sec);
662 }
663 biosdisk = NULL;
664 } else {
665 guess_biosgeom_from_parts(parts, &cyl, &head, &sec);
666 if (nip->ni_nmatches == 1) {
667 bip = &disklist->dl_biosdisks[nip->ni_biosmatches[0]];
668 msg_display(MSG_onebiosmatch);
669 msg_table_add(MSG_onebiosmatch_header);
670 msg_fmt_table_add(MSG_onebiosmatch_row, "%d%d%d%d%u%u",
671 bip->bi_dev, bip->bi_cyl, bip->bi_head, bip->bi_sec,
672 (unsigned)bip->bi_lbasecs,
673 (unsigned)(bip->bi_lbasecs / (1000000000 / 512)));
674 msg_display_add(MSG_biosgeom_advise);
675 biosdisk = bip;
676 process_menu(MENU_biosonematch, &biosdisk);
677 } else {
678 msg_display(MSG_biosmultmatch);
679 msg_table_add(MSG_biosmultmatch_header);
680 for (i = 0; i < nip->ni_nmatches; i++) {
681 bip = &disklist->dl_biosdisks[
682 nip->ni_biosmatches[i]];
683 msg_fmt_table_add(MSG_biosmultmatch_row,
684 "%d%d%d%d%d%u%u", i,
685 bip->bi_dev, bip->bi_cyl, bip->bi_head,
686 bip->bi_sec, (unsigned)bip->bi_lbasecs,
687 (unsigned)bip->bi_lbasecs/(1000000000/512));
688 }
689 process_menu(MENU_biosmultmatch, &i);
690 if (i == -1)
691 biosdisk = NULL;
692 else
693 biosdisk = &disklist->dl_biosdisks[
694 nip->ni_biosmatches[i]];
695 }
696 }
697 if (biosdisk == NULL) {
698 *bcyl = cyl;
699 *bhead = head;
700 *bsec = sec;
701 if (nip != NULL)
702 set_bios_geom(parts, bcyl, bhead, bsec);
703 } else {
704 *bcyl = biosdisk->bi_cyl;
705 *bhead = biosdisk->bi_head;
706 *bsec = biosdisk->bi_sec;
707 }
708 return true;
709 }
710
711 static int
712 mbr_root_above_chs(void)
713 {
714 return pm->ptstart + (daddr_t)DEFROOTSIZE * (daddr_t)(MEG / 512)
715 >= pm->max_chs;
716 }
717
718 /* returns false if no write-back of parts is required */
719 bool
720 md_mbr_update_check(struct disk_partitions *parts, mbr_info_t *mbri)
721 {
722 struct mbr_partition *mbrp;
723 int i, netbsdpart = -1, oldbsdpart = -1, oldbsdcount = 0;
724
725 if (pm->no_mbr || pm->no_part)
726 return false;
727
728 mbrp = &mbri->mbr.mbr_parts[0];
729
730 for (i = 0; i < MBR_PART_COUNT; i++) {
731 if (mbrp[i].mbrp_type == MBR_PTYPE_386BSD) {
732 oldbsdpart = i;
733 oldbsdcount++;
734 } else if (mbrp[i].mbrp_type == MBR_PTYPE_NETBSD)
735 netbsdpart = i;
736 }
737
738 if (netbsdpart == -1 && oldbsdcount == 1) {
739 mbrp[oldbsdpart].mbrp_type = MBR_PTYPE_NETBSD;
740 return true;
741 }
742
743 return false;
744 }
745
746 /*
747 * Read MBR code from a file.
748 * The existing partition table and bootselect configuration is kept.
749 */
750 static int
751 md_read_bootcode(const char *path, struct mbr_sector *mbrs)
752 {
753 int fd;
754 struct stat st;
755 size_t len;
756 struct mbr_sector new_mbr;
757 uint32_t dsn;
758
759 fd = open(path, O_RDONLY);
760 if (fd < 0)
761 return -1;
762
763 if (fstat(fd, &st) < 0 || st.st_size != sizeof *mbrs) {
764 close(fd);
765 return -1;
766 }
767
768 if (read(fd, &new_mbr, sizeof new_mbr) != sizeof new_mbr) {
769 close(fd);
770 return -1;
771 }
772 close(fd);
773
774 if (new_mbr.mbr_bootsel_magic != htole16(MBR_BS_MAGIC))
775 return -1;
776
777 if (mbrs->mbr_bootsel_magic == htole16(MBR_BS_MAGIC)) {
778 len = offsetof(struct mbr_sector, mbr_bootsel);
779 } else
780 len = offsetof(struct mbr_sector, mbr_parts);
781
782 /* Preserve the 'drive serial number' - especially for Vista */
783 dsn = mbrs->mbr_dsn;
784 memcpy(mbrs, &new_mbr, len);
785 mbrs->mbr_dsn = dsn;
786
787 /* Keep flags from object file - indicate the properties */
788 mbrs->mbr_bootsel.mbrbs_flags = new_mbr.mbr_bootsel.mbrbs_flags;
789 mbrs->mbr_magic = htole16(MBR_MAGIC);
790
791 return 0;
792 }
793
794 static unsigned int
795 get_bootmodel(void)
796 {
797 #if defined(__i386__)
798 struct utsname ut;
799 #ifdef DEBUG
800 char *envstr;
801
802 envstr = getenv("BOOTMODEL");
803 if (envstr != NULL)
804 return atoi(envstr);
805 #endif
806
807 if (uname(&ut) < 0)
808 ut.version[0] = 0;
809
810 #if defined(SET_KERNEL_TINY)
811 if (strstr(ut.version, "TINY") != NULL)
812 return SET_KERNEL_TINY;
813 #endif
814 #if defined(SET_KERNEL_PS2)
815 if (strstr(ut.version, "PS2") != NULL)
816 return SET_KERNEL_PS2;
817 #endif
818 #endif
819 return SET_KERNEL_GENERIC;
820 }
821
822
823 int
824 md_pre_mount(struct install_partition_desc *install, size_t ndx)
825 {
826 return 0;
827 }
828
829 #ifdef HAVE_GPT
830 /*
831 * New GPT partitions have been written, update bootloader or remember
832 * data untill needed in md_post_newfs
833 */
834 bool
835 md_gpt_post_write(struct disk_partitions *parts, part_id root_id,
836 bool root_is_new, part_id efi_id, bool efi_is_new)
837 {
838 struct disk_part_info info;
839
840 if (root_id != NO_PART) {
841 /* we always update the gpt boot record for now */
842 if (!parts->pscheme->get_part_info(parts, root_id, &info))
843 return false;
844 if (run_program(RUN_SILENT, "gpt biosboot -b %" PRIu64 " %s",
845 info.start, parts->disk) != 0)
846 return false;
847 }
848
849 return true;
850 }
851 #endif
852
853 /*
854 * When we do an UEFI install, we have completely different default
855 * partitions and need to adjust the description at runtime.
856 */
857 void
858 x86_md_part_defaults(struct pm_devs *cur_pm, struct part_usage_info **partsp,
859 size_t *num_usage_infos)
860 {
861 static const struct part_usage_info uefi_boot_part =
862 {
863 .size = BOOT_PART,
864 .type = BOOT_PART_TYPE,
865 .instflags = PUIINST_NEWFS|PUIINST_BOOT,
866 .fs_type = FS_MSDOS, .fs_version = MBR_PTYPE_FAT32L,
867 .flags = PUIFLAG_ADD_OUTER,
868 };
869
870 struct disk_partitions *parts;
871 struct part_usage_info *new_usage, *boot;
872 struct disk_part_info info;
873 size_t num;
874 part_id pno;
875
876 if (!uefi_boot)
877 return; /* legacy defaults apply */
878
879 /*
880 * Insert a UEFI boot partition at the beginning of the array
881 */
882
883 /* create space for new description */
884 num = *num_usage_infos + 1;
885 new_usage = realloc(*partsp, sizeof(*new_usage)*num);
886 if (new_usage == NULL)
887 return;
888 *partsp = new_usage;
889 *num_usage_infos = num;
890 boot = new_usage;
891 memmove(boot+1, boot, sizeof(*boot)*(num-1));
892 *boot = uefi_boot_part;
893
894 /*
895 * Check if the UEFI partition already exists
896 */
897 parts = pm->parts;
898 if (parts->parent != NULL)
899 parts = parts->parent;
900 for (pno = 0; pno < parts->num_part; pno++) {
901 if (!parts->pscheme->get_part_info(parts, pno, &info))
902 continue;
903 if (info.nat_type->generic_ptype != boot->type)
904 continue;
905 boot->flags &= ~PUIFLAG_ADD_OUTER;
906 boot->flags |= PUIFLG_IS_OUTER|PUIFLG_ADD_INNER;
907 boot->size = info.size;
908 boot->cur_start = info.start;
909 boot->cur_flags = info.flags;
910 break;
911 }
912 }
913
914 /* no need to install bootblock if installing for UEFI */
915 bool
916 x86_md_need_bootblock(struct install_partition_desc *install)
917 {
918
919 return !uefi_boot;
920 }
921