msg.mi.en revision 1.3.2.2
1 1.3.2.2 tls /* $NetBSD: msg.mi.en,v 1.3.2.2 2014/08/20 00:05:13 tls Exp $ */ 2 1.3.2.2 tls 3 1.3.2.2 tls /* 4 1.3.2.2 tls * Copyright 1997 Piermont Information Systems Inc. 5 1.3.2.2 tls * All rights reserved. 6 1.3.2.2 tls * 7 1.3.2.2 tls * Written by Philip A. Nelson for Piermont Information Systems Inc. 8 1.3.2.2 tls * 9 1.3.2.2 tls * Redistribution and use in source and binary forms, with or without 10 1.3.2.2 tls * modification, are permitted provided that the following conditions 11 1.3.2.2 tls * are met: 12 1.3.2.2 tls * 1. Redistributions of source code must retain the above copyright 13 1.3.2.2 tls * notice, this list of conditions and the following disclaimer. 14 1.3.2.2 tls * 2. Redistributions in binary form must reproduce the above copyright 15 1.3.2.2 tls * notice, this list of conditions and the following disclaimer in the 16 1.3.2.2 tls * documentation and/or other materials provided with the distribution. 17 1.3.2.2 tls * 3. The name of Piermont Information Systems Inc. may not be used to endorse 18 1.3.2.2 tls * or promote products derived from this software without specific prior 19 1.3.2.2 tls * written permission. 20 1.3.2.2 tls * 21 1.3.2.2 tls * THIS SOFTWARE IS PROVIDED BY PIERMONT INFORMATION SYSTEMS INC. ``AS IS'' 22 1.3.2.2 tls * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 1.3.2.2 tls * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 24 1.3.2.2 tls * ARE DISCLAIMED. IN NO EVENT SHALL PIERMONT INFORMATION SYSTEMS INC. BE 25 1.3.2.2 tls * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 26 1.3.2.2 tls * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 27 1.3.2.2 tls * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 28 1.3.2.2 tls * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 29 1.3.2.2 tls * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 30 1.3.2.2 tls * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 31 1.3.2.2 tls * THE POSSIBILITY OF SUCH DAMAGE. 32 1.3.2.2 tls * 33 1.3.2.2 tls */ 34 1.3.2.2 tls 35 1.3.2.2 tls /* MI Message catalog -- english, machine independent */ 36 1.3.2.2 tls 37 1.3.2.2 tls message usage 38 1.3.2.2 tls {usage: sysinst [-D] [-f definition_file] [-r release] [-C bg:fg] 39 1.3.2.2 tls } 40 1.3.2.2 tls 41 1.3.2.2 tls message sysinst_message_language 42 1.3.2.2 tls {Installation messages in English} 43 1.3.2.2 tls 44 1.3.2.2 tls message sysinst_message_locale 45 1.3.2.2 tls {en_US.ISO8859-1} 46 1.3.2.2 tls 47 1.3.2.2 tls message Yes {Yes} 48 1.3.2.2 tls message No {No} 49 1.3.2.2 tls message All {All} 50 1.3.2.2 tls message Some {Some} 51 1.3.2.2 tls message None {None} 52 1.3.2.2 tls message none {none} 53 1.3.2.2 tls message OK {OK} 54 1.3.2.2 tls message ok {ok} 55 1.3.2.2 tls message On {On} 56 1.3.2.2 tls message Off {Off} 57 1.3.2.2 tls message unchanged {unchanged} 58 1.3.2.2 tls message Delete {Delete?} 59 1.3.2.2 tls 60 1.3.2.2 tls message install 61 1.3.2.2 tls {install} 62 1.3.2.2 tls 63 1.3.2.2 tls message reinstall 64 1.3.2.2 tls {reinstall sets for} 65 1.3.2.2 tls 66 1.3.2.2 tls message upgrade 67 1.3.2.2 tls {upgrade} 68 1.3.2.2 tls 69 1.3.2.2 tls message hello 70 1.3.2.2 tls {NetBSD/@@MACHINE@@ @@VERSION@@ 71 1.3.2.2 tls 72 1.3.2.2 tls This menu-driven tool is designed to help you install NetBSD to a hard 73 1.3.2.2 tls disk, or upgrade an existing NetBSD system, with a minimum of work. 74 1.3.2.2 tls In the following menus type the reference letter (a, b, c, ...) to 75 1.3.2.2 tls select an item, or type CTRL+N/CTRL+P to select the next/previous item. 76 1.3.2.2 tls The arrow keys and Page-up/Page-down may also work. 77 1.3.2.2 tls Activate the current selection from the menu by typing the enter key. 78 1.3.2.2 tls } 79 1.3.2.2 tls 80 1.3.2.2 tls message thanks 81 1.3.2.2 tls {Thank you for using NetBSD! 82 1.3.2.2 tls } 83 1.3.2.2 tls 84 1.3.2.2 tls message installusure 85 1.3.2.2 tls {You have chosen to install NetBSD on your hard disk. This will change 86 1.3.2.2 tls information on your hard disk. You should have made a full backup 87 1.3.2.2 tls before this procedure! This procedure will do the following things: 88 1.3.2.2 tls a) Partition your disk 89 1.3.2.2 tls b) Create new BSD file systems 90 1.3.2.2 tls c) Load and install distribution sets 91 1.3.2.2 tls d) Some initial system configuration 92 1.3.2.2 tls 93 1.3.2.2 tls (After you enter the partition information but before your disk is 94 1.3.2.2 tls changed, you will have the opportunity to quit this procedure.) 95 1.3.2.2 tls 96 1.3.2.2 tls Shall we continue? 97 1.3.2.2 tls } 98 1.3.2.2 tls 99 1.3.2.2 tls message upgradeusure 100 1.3.2.2 tls {Ok, let's upgrade NetBSD on your hard disk. As always, this will 101 1.3.2.2 tls change information on your hard disk. You should have made a full backup 102 1.3.2.2 tls before this procedure! Do you really want to upgrade NetBSD? 103 1.3.2.2 tls (This is your last warning before this procedure starts modifying your 104 1.3.2.2 tls disks.) 105 1.3.2.2 tls } 106 1.3.2.2 tls 107 1.3.2.2 tls message reinstallusure 108 1.3.2.2 tls {Ok, let's unpack the NetBSD distribution sets to a bootable hard disk. 109 1.3.2.2 tls This procedure just fetches and unpacks sets onto an pre-partitioned 110 1.3.2.2 tls bootable disk. It does not label disks, upgrade bootblocks, or save 111 1.3.2.2 tls any existing configuration info. (Quit and choose `install' or 112 1.3.2.2 tls `upgrade' if you want those options.) You should have already done an 113 1.3.2.2 tls `install' or `upgrade' before starting this procedure! 114 1.3.2.2 tls 115 1.3.2.2 tls Do you really want to reinstall NetBSD distribution sets? 116 1.3.2.2 tls (This is your last warning before this procedure starts modifying your 117 1.3.2.2 tls disks.) 118 1.3.2.2 tls } 119 1.3.2.2 tls 120 1.3.2.2 tls message mount_failed 121 1.3.2.2 tls {Mounting %s failed. Continue? 122 1.3.2.2 tls } 123 1.3.2.2 tls 124 1.3.2.2 tls message nodisk 125 1.3.2.2 tls {I can not find any hard disks for use by NetBSD. You will be 126 1.3.2.2 tls returned to the original menu. 127 1.3.2.2 tls } 128 1.3.2.2 tls 129 1.3.2.2 tls message onedisk 130 1.3.2.2 tls {I found only one disk, %s. 131 1.3.2.2 tls Therefore I assume you want to %s NetBSD on it. 132 1.3.2.2 tls } 133 1.3.2.2 tls 134 1.3.2.2 tls message ask_disk 135 1.3.2.2 tls {On which disk do you want to %s NetBSD? } 136 1.3.2.2 tls 137 1.3.2.2 tls message Available_disks 138 1.3.2.2 tls {Available disks} 139 1.3.2.2 tls 140 1.3.2.2 tls message heads 141 1.3.2.2 tls {heads} 142 1.3.2.2 tls 143 1.3.2.2 tls message sectors 144 1.3.2.2 tls {sectors} 145 1.3.2.2 tls 146 1.3.2.2 tls message fs_isize 147 1.3.2.2 tls {average file size (bytes)} 148 1.3.2.2 tls 149 1.3.2.2 tls message mountpoint 150 1.3.2.2 tls {mount point (or 'none')} 151 1.3.2.2 tls 152 1.3.2.2 tls message cylname 153 1.3.2.2 tls {cyl} 154 1.3.2.2 tls 155 1.3.2.2 tls message secname 156 1.3.2.2 tls {sec} 157 1.3.2.2 tls 158 1.3.2.2 tls message megname 159 1.3.2.2 tls {MB} 160 1.3.2.2 tls 161 1.3.2.2 tls message layout 162 1.3.2.2 tls {NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk 163 1.3.2.2 tls into multiple BSD partitions. You must now set up your BSD disklabel. 164 1.3.2.2 tls 165 1.3.2.2 tls You can use a simple editor to set the sizes of the NetBSD partitions, 166 1.3.2.2 tls or keep the existing partition sizes and contents. 167 1.3.2.2 tls 168 1.3.2.2 tls You will then be given the opportunity to change any of the disklabel 169 1.3.2.2 tls fields. 170 1.3.2.2 tls 171 1.3.2.2 tls The NetBSD part of your disk is %d Megabytes. 172 1.3.2.2 tls A full installation requires at least %d Megabytes without X and 173 1.3.2.2 tls at least %d Megabytes if the X sets are included. 174 1.3.2.2 tls } 175 1.3.2.2 tls 176 1.3.2.2 tls message Choose_your_size_specifier 177 1.3.2.2 tls {Choosing megabytes will give partition sizes close to your choice, 178 1.3.2.2 tls but aligned to cylinder boundaries. Choosing sectors will allow you 179 1.3.2.2 tls to more accurately specify the sizes. On modern ZBR disks, actual 180 1.3.2.2 tls cylinder size varies across the disk and there is little real gain 181 1.3.2.2 tls from cylinder alignment. On older disks, it is most efficient to 182 1.3.2.2 tls choose partition sizes that are exact multiples of your actual 183 1.3.2.2 tls cylinder size. 184 1.3.2.2 tls 185 1.3.2.2 tls Choose your size specifier} 186 1.3.2.2 tls 187 1.3.2.2 tls message ptnsizes 188 1.3.2.2 tls {You can now change the sizes for the system partitions. The default is 189 1.3.2.2 tls to allocate all the space to the root file system, however you may wish 190 1.3.2.2 tls to have separate /usr (additional system files), /var (log files etc) 191 1.3.2.2 tls or /home (users' home directories). 192 1.3.2.2 tls 193 1.3.2.2 tls Free space will be added to the partition marked with a '+'. 194 1.3.2.2 tls } 195 1.3.2.2 tls 196 1.3.2.2 tls message ptnheaders 197 1.3.2.2 tls { 198 1.3.2.2 tls MB Cylinders Sectors Filesystem 199 1.3.2.2 tls } 200 1.3.2.2 tls 201 1.3.2.2 tls message askfsmount 202 1.3.2.2 tls {Mount point?} 203 1.3.2.2 tls 204 1.3.2.2 tls message askfssize 205 1.3.2.2 tls {Size for %s in %s?} 206 1.3.2.2 tls 207 1.3.2.2 tls message askunits 208 1.3.2.2 tls {Change input units (sectors/cylinders/MB)} 209 1.3.2.2 tls 210 1.3.2.2 tls message NetBSD_partition_cant_change 211 1.3.2.2 tls {NetBSD partition} 212 1.3.2.2 tls 213 1.3.2.2 tls message Whole_disk_cant_change 214 1.3.2.2 tls {Whole disk} 215 1.3.2.2 tls 216 1.3.2.2 tls message Boot_partition_cant_change 217 1.3.2.2 tls {Boot partition} 218 1.3.2.2 tls 219 1.3.2.2 tls message add_another_ptn 220 1.3.2.2 tls {Add a user defined partition} 221 1.3.2.2 tls 222 1.3.2.2 tls message fssizesok 223 1.3.2.2 tls {Accept partition sizes. Free space %d %s, %d free partitions.} 224 1.3.2.2 tls 225 1.3.2.2 tls message fssizesbad 226 1.3.2.2 tls {Reduce partition sizes by %d %s (%u sectors).} 227 1.3.2.2 tls 228 1.3.2.2 tls message startoutsidedisk 229 1.3.2.2 tls {The start value you specified is beyond the end of the disk. 230 1.3.2.2 tls } 231 1.3.2.2 tls 232 1.3.2.2 tls message endoutsidedisk 233 1.3.2.2 tls {With this value, the partition end is beyond the end of the disk. 234 1.3.2.2 tls Your partition size has been truncated to %d %s. 235 1.3.2.2 tls 236 1.3.2.2 tls Type enter to continue 237 1.3.2.2 tls } 238 1.3.2.2 tls 239 1.3.2.2 tls message toobigdisklabel 240 1.3.2.2 tls { 241 1.3.2.2 tls This disk is too large for a disklabel partition table to be used 242 1.3.2.2 tls and hence cannot be used as a bootable disk or to hold the root 243 1.3.2.2 tls partition. 244 1.3.2.2 tls } 245 1.3.2.2 tls 246 1.3.2.2 tls message fspart 247 1.3.2.2 tls {We now have your BSD-disklabel partitions as: 248 1.3.2.2 tls This is your last chance to change them. 249 1.3.2.2 tls 250 1.3.2.2 tls } 251 1.3.2.2 tls 252 1.3.2.2 tls message fspart_header 253 1.3.2.2 tls { Start %3s End %3s Size %3s FS type Newfs Mount Mount point 254 1.3.2.2 tls --------- --------- --------- ---------- ----- ----- ----------- 255 1.3.2.2 tls } 256 1.3.2.2 tls 257 1.3.2.2 tls message fspart_row 258 1.3.2.2 tls {%9lu %9lu %9lu %-10s %-5s %-5s %s} 259 1.3.2.2 tls 260 1.3.2.2 tls message show_all_unused_partitions 261 1.3.2.2 tls {Show all unused partitions} 262 1.3.2.2 tls 263 1.3.2.2 tls message partition_sizes_ok 264 1.3.2.2 tls {Partition sizes ok} 265 1.3.2.2 tls 266 1.3.2.2 tls message edfspart 267 1.3.2.2 tls {The current values for partition `%c' are, 268 1.3.2.2 tls Select the field you wish to change: 269 1.3.2.2 tls 270 1.3.2.2 tls MB cylinders sectors 271 1.3.2.2 tls ------- --------- --------- 272 1.3.2.2 tls } 273 1.3.2.2 tls 274 1.3.2.2 tls message fstype_fmt 275 1.3.2.2 tls { FStype: %9s} 276 1.3.2.2 tls 277 1.3.2.2 tls message start_fmt 278 1.3.2.2 tls { start: %9u %8u%c %9u} 279 1.3.2.2 tls 280 1.3.2.2 tls message size_fmt 281 1.3.2.2 tls { size: %9u %8u%c %9u} 282 1.3.2.2 tls 283 1.3.2.2 tls message end_fmt 284 1.3.2.2 tls { end: %9u %8u%c %9u} 285 1.3.2.2 tls 286 1.3.2.2 tls message bsize_fmt 287 1.3.2.2 tls { block size: %9d bytes} 288 1.3.2.2 tls 289 1.3.2.2 tls message fsize_fmt 290 1.3.2.2 tls { fragment size: %9d bytes} 291 1.3.2.2 tls 292 1.3.2.2 tls message isize_fmt 293 1.3.2.2 tls { avg file size: %9d bytes (for number of inodes)} 294 1.3.2.2 tls message isize_fmt_dflt 295 1.3.2.2 tls { avg file size: 4 fragments} 296 1.3.2.2 tls 297 1.3.2.2 tls message newfs_fmt 298 1.3.2.2 tls { newfs: %9s} 299 1.3.2.2 tls 300 1.3.2.2 tls message mount_fmt 301 1.3.2.2 tls { mount: %9s} 302 1.3.2.2 tls 303 1.3.2.2 tls message mount_options_fmt 304 1.3.2.2 tls { mount options: } 305 1.3.2.2 tls 306 1.3.2.2 tls message mountpt_fmt 307 1.3.2.2 tls { mount point: %9s} 308 1.3.2.2 tls 309 1.3.2.2 tls message toggle 310 1.3.2.2 tls {Toggle} 311 1.3.2.2 tls 312 1.3.2.2 tls message restore 313 1.3.2.2 tls {Restore original values} 314 1.3.2.2 tls 315 1.3.2.2 tls message Select_the_type 316 1.3.2.2 tls {Select the type} 317 1.3.2.2 tls 318 1.3.2.2 tls message other_types 319 1.3.2.2 tls {other types} 320 1.3.2.2 tls 321 1.3.2.2 tls message label_size 322 1.3.2.2 tls {%s 323 1.3.2.2 tls Special values that can be entered for the size value: 324 1.3.2.2 tls -1: use until the end of the NetBSD part of the disk 325 1.3.2.2 tls a-%c: end this partition where partition X starts 326 1.3.2.2 tls 327 1.3.2.2 tls size (%s)} 328 1.3.2.2 tls 329 1.3.2.2 tls message label_offset 330 1.3.2.2 tls {%s 331 1.3.2.2 tls Special values that can be entered for the offset value: 332 1.3.2.2 tls -1: start at the beginning of the NetBSD part of the disk 333 1.3.2.2 tls a-%c: start at the end of previous partition (a, b, ..., %c) 334 1.3.2.2 tls 335 1.3.2.2 tls start (%s)} 336 1.3.2.2 tls 337 1.3.2.2 tls message invalid_sector_number 338 1.3.2.2 tls {Badly formed sector number 339 1.3.2.2 tls } 340 1.3.2.2 tls 341 1.3.2.2 tls message Select_file_system_block_size 342 1.3.2.2 tls {Select file system block size} 343 1.3.2.2 tls 344 1.3.2.2 tls message Select_file_system_fragment_size 345 1.3.2.2 tls {Select file system fragment size} 346 1.3.2.2 tls 347 1.3.2.2 tls message packname 348 1.3.2.2 tls {Please enter a name for your NetBSD disk} 349 1.3.2.2 tls 350 1.3.2.2 tls message lastchance 351 1.3.2.2 tls {Ok, we are now ready to install NetBSD on your hard disk (%s). Nothing has been 352 1.3.2.2 tls written yet. This is your last chance to quit this process before anything 353 1.3.2.2 tls gets changed. 354 1.3.2.2 tls 355 1.3.2.2 tls Shall we continue? 356 1.3.2.2 tls } 357 1.3.2.2 tls 358 1.3.2.2 tls message disksetupdone 359 1.3.2.2 tls {Okay, the first part of the procedure is finished. Sysinst has 360 1.3.2.2 tls written a disklabel to the target disk, and newfs'ed and fsck'ed 361 1.3.2.2 tls the new partitions you specified for the target disk. 362 1.3.2.2 tls } 363 1.3.2.2 tls 364 1.3.2.2 tls message disksetupdoneupdate 365 1.3.2.2 tls {Okay, the first part of the procedure is finished. Sysinst has 366 1.3.2.2 tls written a disklabel to the target disk, and fsck'ed the new 367 1.3.2.2 tls partitions you specified for the target disk. 368 1.3.2.2 tls } 369 1.3.2.2 tls 370 1.3.2.2 tls message openfail 371 1.3.2.2 tls {Could not open %s, error message was: %s. 372 1.3.2.2 tls } 373 1.3.2.2 tls 374 1.3.2.2 tls message mountfail 375 1.3.2.2 tls {mount of device /dev/%s%c on %s failed. 376 1.3.2.2 tls } 377 1.3.2.2 tls 378 1.3.2.2 tls message extractcomplete 379 1.3.2.2 tls {The extraction of the selected sets for NetBSD-@@VERSION@@ is complete. 380 1.3.2.2 tls The system is now able to boot from the selected harddisk. To complete 381 1.3.2.2 tls the installation, sysinst will give you the opportunity to configure 382 1.3.2.2 tls some essential things first. 383 1.3.2.2 tls } 384 1.3.2.2 tls 385 1.3.2.2 tls message instcomplete 386 1.3.2.2 tls {The installation of NetBSD-@@VERSION@@ is now complete. The system 387 1.3.2.2 tls should boot from hard disk. Follow the instructions in the INSTALL 388 1.3.2.2 tls document about final configuration of your system. The afterboot(8) 389 1.3.2.2 tls manpage is another recommended reading; it contains a list of things 390 1.3.2.2 tls to be checked after the first complete boot. 391 1.3.2.2 tls 392 1.3.2.2 tls At a minimum, you should edit /etc/rc.conf to match your needs. See 393 1.3.2.2 tls /etc/defaults/rc.conf for the default values. 394 1.3.2.2 tls } 395 1.3.2.2 tls 396 1.3.2.2 tls message upgrcomplete 397 1.3.2.2 tls {The upgrade to NetBSD-@@VERSION@@ is now complete. You will 398 1.3.2.2 tls now need to follow the instructions in the INSTALL document as to 399 1.3.2.2 tls what you need to do to get your system reconfigured for your situation. 400 1.3.2.2 tls Remember to (re)read the afterboot(8) manpage as it may contain new 401 1.3.2.2 tls items since your last upgrade. 402 1.3.2.2 tls 403 1.3.2.2 tls At a minimum, you must edit rc.conf for your local environment and change 404 1.3.2.2 tls rc_configured=NO to rc_configured=YES or reboots will stop at single-user, 405 1.3.2.2 tls and copy back the password files (taking into account new system accounts 406 1.3.2.2 tls that may have been created for this release) if you were using local 407 1.3.2.2 tls password files. 408 1.3.2.2 tls } 409 1.3.2.2 tls 410 1.3.2.2 tls 411 1.3.2.2 tls message unpackcomplete 412 1.3.2.2 tls {Unpacking additional release sets of NetBSD-@@VERSION@@ is now complete. 413 1.3.2.2 tls You will now need to follow the instructions in the INSTALL document 414 1.3.2.2 tls to get your system reconfigured for your situation. 415 1.3.2.2 tls The afterboot(8) manpage can also be of some help. 416 1.3.2.2 tls 417 1.3.2.2 tls At a minimum, you must edit rc.conf for your local environment and change 418 1.3.2.2 tls rc_configured=NO to rc_configured=YES or reboots will stop at single-user. 419 1.3.2.2 tls } 420 1.3.2.2 tls 421 1.3.2.2 tls message distmedium 422 1.3.2.2 tls {Your disk is now ready for installing the kernel and the distribution 423 1.3.2.2 tls sets. As noted in your INSTALL notes, you have several options. For 424 1.3.2.2 tls ftp or nfs, you must be connected to a network with access to the proper 425 1.3.2.2 tls machines. 426 1.3.2.2 tls 427 1.3.2.2 tls Sets selected %d, processed %d, Next set %s. 428 1.3.2.2 tls 429 1.3.2.2 tls } 430 1.3.2.2 tls 431 1.3.2.2 tls message distset 432 1.3.2.2 tls {The NetBSD distribution is broken into a collection of distribution 433 1.3.2.2 tls sets. There are some basic sets that are needed by all installations 434 1.3.2.2 tls and there are some other sets that are not needed by all installations. 435 1.3.2.2 tls You may choose to install a core set (Minimal installation), all of them 436 1.3.2.2 tls (Full installation) or you select from the optional distribution sets. 437 1.3.2.2 tls } /* XXX add 'minimal installation' */ 438 1.3.2.2 tls 439 1.3.2.2 tls message ftpsource 440 1.3.2.2 tls {The following are the %s site, directory, user, and password that 441 1.3.2.2 tls will be used. If "user" is "ftp", then the password is not needed. 442 1.3.2.2 tls 443 1.3.2.2 tls } 444 1.3.2.2 tls 445 1.3.2.2 tls message email 446 1.3.2.2 tls {e-mail address} 447 1.3.2.2 tls 448 1.3.2.2 tls message dev 449 1.3.2.2 tls {device} 450 1.3.2.2 tls 451 1.3.2.2 tls message nfssource 452 1.3.2.2 tls {Enter the nfs host and server directory where the distribution is located. 453 1.3.2.2 tls Remember, the directory should contain the .tgz files and 454 1.3.2.2 tls must be nfs mountable. 455 1.3.2.2 tls 456 1.3.2.2 tls } 457 1.3.2.2 tls 458 1.3.2.2 tls message floppysource 459 1.3.2.2 tls {Enter the floppy device to be used and transfer directory on the target 460 1.3.2.2 tls file system. The set files must be in the root directory of the floppies. 461 1.3.2.2 tls 462 1.3.2.2 tls } 463 1.3.2.2 tls 464 1.3.2.2 tls message cdromsource 465 1.3.2.2 tls {Enter the CDROM device to be used and directory on the CDROM where 466 1.3.2.2 tls the distribution is located. 467 1.3.2.2 tls Remember, the directory should contain the .tgz files. 468 1.3.2.2 tls 469 1.3.2.2 tls } 470 1.3.2.2 tls 471 1.3.2.2 tls message Available_cds 472 1.3.2.2 tls {Available CDs } 473 1.3.2.2 tls 474 1.3.2.2 tls message ask_cd 475 1.3.2.2 tls {Multiple CDs found, please select the one containing the install CD.} 476 1.3.2.2 tls 477 1.3.2.2 tls message cd_path_not_found 478 1.3.2.2 tls {The installation sets have not been found at the default location on this 479 1.3.2.2 tls CD. Please check device and path name.} 480 1.3.2.2 tls 481 1.3.2.2 tls message localfssource 482 1.3.2.2 tls {Enter the unmounted local device and directory on that device where 483 1.3.2.2 tls the distribution is located. 484 1.3.2.2 tls Remember, the directory should contain the .tgz files. 485 1.3.2.2 tls 486 1.3.2.2 tls } 487 1.3.2.2 tls 488 1.3.2.2 tls message localdir 489 1.3.2.2 tls {Enter the already-mounted local directory where the distribution is located. 490 1.3.2.2 tls Remember, the directory should contain the .tgz files. 491 1.3.2.2 tls 492 1.3.2.2 tls } 493 1.3.2.2 tls 494 1.3.2.2 tls message filesys 495 1.3.2.2 tls {file system} 496 1.3.2.2 tls 497 1.3.2.2 tls message nonet 498 1.3.2.2 tls {I can not find any network interfaces for use by NetBSD. You will be 499 1.3.2.2 tls returned to the previous menu. 500 1.3.2.2 tls } 501 1.3.2.2 tls 502 1.3.2.2 tls message netup 503 1.3.2.2 tls {The following network interfaces are active: %s 504 1.3.2.2 tls Does one of them connect to the required server?} 505 1.3.2.2 tls 506 1.3.2.2 tls message asknetdev 507 1.3.2.2 tls {Which network device would you like to use?} 508 1.3.2.2 tls 509 1.3.2.2 tls message netdevs 510 1.3.2.2 tls {Available interfaces} 511 1.3.2.2 tls 512 1.3.2.2 tls message netinfo 513 1.3.2.2 tls {To be able to use the network, we need answers to the following: 514 1.3.2.2 tls 515 1.3.2.2 tls } 516 1.3.2.2 tls 517 1.3.2.2 tls message net_domain 518 1.3.2.2 tls {Your DNS domain} 519 1.3.2.2 tls 520 1.3.2.2 tls message net_host 521 1.3.2.2 tls {Your host name} 522 1.3.2.2 tls 523 1.3.2.2 tls message net_ip 524 1.3.2.2 tls {Your IPv4 number} 525 1.3.2.2 tls 526 1.3.2.2 tls message net_srv_ip 527 1.3.2.2 tls {Server IPv4 number} 528 1.3.2.2 tls 529 1.3.2.2 tls message net_mask 530 1.3.2.2 tls {IPv4 Netmask} 531 1.3.2.2 tls 532 1.3.2.2 tls message net_namesrv6 533 1.3.2.2 tls {IPv6 name server} 534 1.3.2.2 tls 535 1.3.2.2 tls message net_namesrv 536 1.3.2.2 tls {IPv4 name server} 537 1.3.2.2 tls 538 1.3.2.2 tls message net_defroute 539 1.3.2.2 tls {IPv4 gateway} 540 1.3.2.2 tls 541 1.3.2.2 tls message net_media 542 1.3.2.2 tls {Network media type} 543 1.3.2.2 tls 544 1.3.2.2 tls message netok 545 1.3.2.2 tls {The following are the values you entered. 546 1.3.2.2 tls 547 1.3.2.2 tls DNS Domain: %s 548 1.3.2.2 tls Host Name: %s 549 1.3.2.2 tls Primary Interface: %s 550 1.3.2.2 tls Host IP: %s 551 1.3.2.2 tls Netmask: %s 552 1.3.2.2 tls IPv4 Nameserver: %s 553 1.3.2.2 tls IPv4 Gateway: %s 554 1.3.2.2 tls Media type: %s 555 1.3.2.2 tls } 556 1.3.2.2 tls 557 1.3.2.2 tls message netok_slip 558 1.3.2.2 tls {The following are the values you entered. Are they OK? 559 1.3.2.2 tls 560 1.3.2.2 tls DNS Domain: %s 561 1.3.2.2 tls Host Name: %s 562 1.3.2.2 tls Primary Interface: %s 563 1.3.2.2 tls Host IP: %s 564 1.3.2.2 tls Server IP: %s 565 1.3.2.2 tls Netmask: %s 566 1.3.2.2 tls IPv4 Nameserver: %s 567 1.3.2.2 tls IPv4 Gateway: %s 568 1.3.2.2 tls Media type: %s 569 1.3.2.2 tls } 570 1.3.2.2 tls 571 1.3.2.2 tls message netokv6 572 1.3.2.2 tls {IPv6 autoconf: %s 573 1.3.2.2 tls IPv6 Nameserver: %s 574 1.3.2.2 tls } 575 1.3.2.2 tls 576 1.3.2.2 tls message netok_ok 577 1.3.2.2 tls {Are they OK?} 578 1.3.2.2 tls 579 1.3.2.2 tls message wait_network 580 1.3.2.2 tls { 581 1.3.2.2 tls Waiting while network interface comes up. 582 1.3.2.2 tls } 583 1.3.2.2 tls 584 1.3.2.2 tls message resolv 585 1.3.2.2 tls {Could not create /etc/resolv.conf. Install aborted. 586 1.3.2.2 tls } 587 1.3.2.2 tls 588 1.3.2.2 tls message realdir 589 1.3.2.2 tls {Could not change to directory %s: %s. Install aborted. 590 1.3.2.2 tls } 591 1.3.2.2 tls 592 1.3.2.2 tls message delete_xfer_file 593 1.3.2.2 tls {Delete after install} 594 1.3.2.2 tls 595 1.3.2.2 tls message notarfile 596 1.3.2.2 tls {Release set %s does not exist.} 597 1.3.2.2 tls 598 1.3.2.2 tls message endtarok 599 1.3.2.2 tls {All selected distribution sets unpacked successfully.} 600 1.3.2.2 tls 601 1.3.2.2 tls message endtar 602 1.3.2.2 tls {There were problems unpacking distribution sets. 603 1.3.2.2 tls Your installation is incomplete. 604 1.3.2.2 tls 605 1.3.2.2 tls You selected %d distribution sets. %d sets couldn't be found 606 1.3.2.2 tls and %d were skipped after an error occurred. Of the %d 607 1.3.2.2 tls that were attempted, %d unpacked without errors and %d with errors. 608 1.3.2.2 tls 609 1.3.2.2 tls The installation is aborted. Please recheck your distribution source 610 1.3.2.2 tls and consider reinstalling sets from the main menu.} 611 1.3.2.2 tls 612 1.3.2.2 tls message abort 613 1.3.2.2 tls {Your choices have made it impossible to install NetBSD. Install aborted. 614 1.3.2.2 tls } 615 1.3.2.2 tls 616 1.3.2.2 tls message abortinst 617 1.3.2.2 tls {The distribution was not successfully loaded. You will need to proceed 618 1.3.2.2 tls by hand. Installation aborted. 619 1.3.2.2 tls } 620 1.3.2.2 tls 621 1.3.2.2 tls message abortupgr 622 1.3.2.2 tls {The distribution was not successfully loaded. You will need to proceed 623 1.3.2.2 tls by hand. Upgrade aborted. 624 1.3.2.2 tls } 625 1.3.2.2 tls 626 1.3.2.2 tls message abortunpack 627 1.3.2.2 tls {Unpacking additional sets was not successful. You will need to 628 1.3.2.2 tls proceed by hand, or choose a different source for release sets and try 629 1.3.2.2 tls again. 630 1.3.2.2 tls } 631 1.3.2.2 tls 632 1.3.2.2 tls message createfstab 633 1.3.2.2 tls {There is a big problem! Can not create /mnt/etc/fstab. Bailing out! 634 1.3.2.2 tls } 635 1.3.2.2 tls 636 1.3.2.2 tls 637 1.3.2.2 tls message noetcfstab 638 1.3.2.2 tls {Help! No /etc/fstab in target disk %s. Aborting upgrade. 639 1.3.2.2 tls } 640 1.3.2.2 tls 641 1.3.2.2 tls message badetcfstab 642 1.3.2.2 tls {Help! Can't parse /etc/fstab in target disk %s. Aborting upgrade. 643 1.3.2.2 tls } 644 1.3.2.2 tls 645 1.3.2.2 tls message X_oldexists 646 1.3.2.2 tls {I cannot save %s/bin/X as %s/bin/X.old, because the 647 1.3.2.2 tls target disk already has an %s/bin/X.old. Please fix this before 648 1.3.2.2 tls continuing. 649 1.3.2.2 tls 650 1.3.2.2 tls One way is to start a shell from the Utilities menu, examine the 651 1.3.2.2 tls target %s/bin/X and %s/bin/X.old. If 652 1.3.2.2 tls %s/bin/X.old is from a completed upgrade, you can rm -f 653 1.3.2.2 tls %s/bin/X.old and restart. Or if %s/bin/X.old is from 654 1.3.2.2 tls a recent, incomplete upgrade, you can rm -f %s/bin/X and mv 655 1.3.2.2 tls %s/bin/X.old to %s/bin/X 656 1.3.2.2 tls 657 1.3.2.2 tls Aborting upgrade.} 658 1.3.2.2 tls 659 1.3.2.2 tls message netnotup 660 1.3.2.2 tls {There was a problem in setting up the network. Either your gateway 661 1.3.2.2 tls or your nameserver was not reachable by a ping. Do you want to 662 1.3.2.2 tls configure your network again? (No allows you to continue anyway 663 1.3.2.2 tls or abort the install process.) 664 1.3.2.2 tls } 665 1.3.2.2 tls 666 1.3.2.2 tls message netnotup_continueanyway 667 1.3.2.2 tls {Would you like to continue the install process anyway, and assume 668 1.3.2.2 tls that the network is working? (No aborts the install process.) 669 1.3.2.2 tls } 670 1.3.2.2 tls 671 1.3.2.2 tls message makedev 672 1.3.2.2 tls {Making device nodes ... 673 1.3.2.2 tls } 674 1.3.2.2 tls 675 1.3.2.2 tls message badfs 676 1.3.2.2 tls {It appears that /dev/%s%c is not a BSD file system or the fsck was 677 1.3.2.2 tls not successful. Try mounting it anyway? (Error number %d.) 678 1.3.2.2 tls } 679 1.3.2.2 tls 680 1.3.2.2 tls message rootmissing 681 1.3.2.2 tls { target root is missing %s. 682 1.3.2.2 tls } 683 1.3.2.2 tls 684 1.3.2.2 tls message badroot 685 1.3.2.2 tls {The completed new root file system failed a basic sanity check. 686 1.3.2.2 tls Are you sure you installed all the required sets? 687 1.3.2.2 tls } 688 1.3.2.2 tls 689 1.3.2.2 tls message fd_type 690 1.3.2.2 tls {Floppy file system type} 691 1.3.2.2 tls 692 1.3.2.2 tls message fdnotfound 693 1.3.2.2 tls {Could not find the file on the floppy. 694 1.3.2.2 tls } 695 1.3.2.2 tls 696 1.3.2.2 tls message fdremount 697 1.3.2.2 tls {The floppy was not mounted successfully. 698 1.3.2.2 tls } 699 1.3.2.2 tls 700 1.3.2.2 tls message fdmount 701 1.3.2.2 tls {Please load the floppy containing the file named "%s.%s". 702 1.3.2.2 tls 703 1.3.2.2 tls If the set's has no more disks, select "Set finished" to install the set. 704 1.3.2.2 tls Select "Abort fetch" to return to the install media selection menu. 705 1.3.2.2 tls } 706 1.3.2.2 tls 707 1.3.2.2 tls message mntnetconfig 708 1.3.2.2 tls {Is the network information you entered accurate for this machine 709 1.3.2.2 tls in regular operation and do you want it installed in /etc? } 710 1.3.2.2 tls 711 1.3.2.2 tls message cur_distsets 712 1.3.2.2 tls {The following is the list of distribution sets that will be used. 713 1.3.2.2 tls 714 1.3.2.2 tls } 715 1.3.2.2 tls 716 1.3.2.2 tls message cur_distsets_header 717 1.3.2.2 tls { Distribution set Selected 718 1.3.2.2 tls ------------------------ -------- 719 1.3.2.2 tls } 720 1.3.2.2 tls 721 1.3.2.2 tls message set_base 722 1.3.2.2 tls {Base} 723 1.3.2.2 tls 724 1.3.2.2 tls message set_system 725 1.3.2.2 tls {System (/etc)} 726 1.3.2.2 tls 727 1.3.2.2 tls message set_compiler 728 1.3.2.2 tls {Compiler Tools} 729 1.3.2.2 tls 730 1.3.2.2 tls message set_games 731 1.3.2.2 tls {Games} 732 1.3.2.2 tls 733 1.3.2.2 tls message set_man_pages 734 1.3.2.2 tls {Online Manual Pages} 735 1.3.2.2 tls 736 1.3.2.2 tls message set_misc 737 1.3.2.2 tls {Miscellaneous} 738 1.3.2.2 tls 739 1.3.2.2 tls message set_modules 740 1.3.2.2 tls {Kernel Modules} 741 1.3.2.2 tls 742 1.3.2.2 tls message set_tests 743 1.3.2.2 tls {Test programs} 744 1.3.2.2 tls 745 1.3.2.2 tls message set_text_tools 746 1.3.2.2 tls {Text Processing Tools} 747 1.3.2.2 tls 748 1.3.2.2 tls message set_X11 749 1.3.2.2 tls {X11 sets} 750 1.3.2.2 tls 751 1.3.2.2 tls message set_X11_base 752 1.3.2.2 tls {X11 base and clients} 753 1.3.2.2 tls 754 1.3.2.2 tls message set_X11_etc 755 1.3.2.2 tls {X11 configuration} 756 1.3.2.2 tls 757 1.3.2.2 tls message set_X11_fonts 758 1.3.2.2 tls {X11 fonts} 759 1.3.2.2 tls 760 1.3.2.2 tls message set_X11_servers 761 1.3.2.2 tls {X11 servers} 762 1.3.2.2 tls 763 1.3.2.2 tls message set_X11_prog 764 1.3.2.2 tls {X11 programming} 765 1.3.2.2 tls 766 1.3.2.2 tls message set_source 767 1.3.2.2 tls {Source and debug sets} 768 1.3.2.2 tls 769 1.3.2.2 tls message set_syssrc 770 1.3.2.2 tls {Kernel sources} 771 1.3.2.2 tls 772 1.3.2.2 tls message set_src 773 1.3.2.2 tls {Base sources} 774 1.3.2.2 tls 775 1.3.2.2 tls message set_sharesrc 776 1.3.2.2 tls {Share sources} 777 1.3.2.2 tls 778 1.3.2.2 tls message set_gnusrc 779 1.3.2.2 tls {GNU sources} 780 1.3.2.2 tls 781 1.3.2.2 tls message set_xsrc 782 1.3.2.2 tls {X11 sources} 783 1.3.2.2 tls 784 1.3.2.2 tls message set_debug 785 1.3.2.2 tls {Debug symbols} 786 1.3.2.2 tls 787 1.3.2.2 tls message set_xdebug 788 1.3.2.2 tls {X11 debug symbols} 789 1.3.2.2 tls 790 1.3.2.2 tls message cur_distsets_row 791 1.3.2.2 tls {%-27s %3s} 792 1.3.2.2 tls 793 1.3.2.2 tls message select_all 794 1.3.2.2 tls {Select all the above sets} 795 1.3.2.2 tls 796 1.3.2.2 tls message select_none 797 1.3.2.2 tls {Deselect all the above sets} 798 1.3.2.2 tls 799 1.3.2.2 tls message install_selected_sets 800 1.3.2.2 tls {Install selected sets} 801 1.3.2.2 tls 802 1.3.2.2 tls message tarerror 803 1.3.2.2 tls {There was an error in extracting the file %s. That means 804 1.3.2.2 tls some files were not extracted correctly and your system will not be 805 1.3.2.2 tls complete. 806 1.3.2.2 tls 807 1.3.2.2 tls Continue extracting sets?} 808 1.3.2.2 tls 809 1.3.2.2 tls message must_be_one_root 810 1.3.2.2 tls {There must be a single partition marked to be mounted on '/'.} 811 1.3.2.2 tls 812 1.3.2.2 tls message partitions_overlap 813 1.3.2.2 tls {partitions %c and %c overlap.} 814 1.3.2.2 tls 815 1.3.2.2 tls message No_Bootcode 816 1.3.2.2 tls {No bootcode for specified FS type of root partition} 817 1.3.2.2 tls 818 1.3.2.2 tls message cannot_ufs2_root 819 1.3.2.2 tls {Sorry, the root file system can't be FFSv2 due to lack of bootloader support 820 1.3.2.2 tls on this port.} 821 1.3.2.2 tls 822 1.3.2.2 tls message edit_partitions_again 823 1.3.2.2 tls { 824 1.3.2.2 tls 825 1.3.2.2 tls You can either edit the partition table by hand, or give up and return 826 1.3.2.2 tls to the main menu. 827 1.3.2.2 tls 828 1.3.2.2 tls Edit the partition table again?} 829 1.3.2.2 tls 830 1.3.2.2 tls message config_open_error 831 1.3.2.2 tls {Could not open config file %s\n} 832 1.3.2.2 tls 833 1.3.2.2 tls message choose_timezone 834 1.3.2.2 tls {Please choose the timezone that fits you best from the list below. 835 1.3.2.2 tls Press RETURN to select an entry. 836 1.3.2.2 tls Press 'x' followed by RETURN to quit the timezone selection. 837 1.3.2.2 tls 838 1.3.2.2 tls Default: %s 839 1.3.2.2 tls Selected: %s 840 1.3.2.2 tls Local time: %s %s 841 1.3.2.2 tls } 842 1.3.2.2 tls 843 1.3.2.2 tls message tz_back 844 1.3.2.2 tls { Back to main timezone list} 845 1.3.2.2 tls 846 1.3.2.2 tls message swapactive 847 1.3.2.2 tls {The disk that you selected has a swap partition that may currently be 848 1.3.2.2 tls in use if your system is low on memory. Because you are going to 849 1.3.2.2 tls repartition this disk, this swap partition will be disabled now. Please 850 1.3.2.2 tls beware that this might lead to out of swap errors. Should you get such 851 1.3.2.2 tls an error, please restart the system and try again.} 852 1.3.2.2 tls 853 1.3.2.2 tls message swapdelfailed 854 1.3.2.2 tls {Sysinst failed to deactivate the swap partition on the disk that you 855 1.3.2.2 tls chose for installation. Please reboot and try again.} 856 1.3.2.2 tls 857 1.3.2.2 tls message rootpw 858 1.3.2.2 tls {The root password of the newly installed system has not yet been initialized, 859 1.3.2.2 tls and is thus empty. Do you want to set a root password for the system now?} 860 1.3.2.2 tls 861 1.3.2.2 tls message rootsh 862 1.3.2.2 tls {You can now select which shell to use for the root user. The default is 863 1.3.2.2 tls /bin/sh, but you may prefer another one.} 864 1.3.2.2 tls 865 1.3.2.2 tls message no_root_fs 866 1.3.2.2 tls { 867 1.3.2.2 tls There is no defined root file system. You need to define at least 868 1.3.2.2 tls one mount point with "/". 869 1.3.2.2 tls 870 1.3.2.2 tls Press <return> to continue. 871 1.3.2.2 tls } 872 1.3.2.2 tls 873 1.3.2.2 tls message slattach { 874 1.3.2.2 tls Enter slattach flags 875 1.3.2.2 tls } 876 1.3.2.2 tls 877 1.3.2.2 tls message Pick_an_option {Pick an option to turn on or off.} 878 1.3.2.2 tls message Scripting {Scripting} 879 1.3.2.2 tls message Logging {Logging} 880 1.3.2.2 tls 881 1.3.2.2 tls message Status { Status: } 882 1.3.2.2 tls message Command {Command: } 883 1.3.2.2 tls message Running {Running} 884 1.3.2.2 tls message Finished {Finished} 885 1.3.2.2 tls message Command_failed {Command failed} 886 1.3.2.2 tls message Command_ended_on_signal {Command ended on signal} 887 1.3.2.2 tls 888 1.3.2.2 tls message NetBSD_VERSION_Install_System {NetBSD-@@VERSION@@ Install System} 889 1.3.2.2 tls message Exit_Install_System {Exit Install System} 890 1.3.2.2 tls message Install_NetBSD_to_hard_disk {Install NetBSD to hard disk} 891 1.3.2.2 tls message Upgrade_NetBSD_on_a_hard_disk {Upgrade NetBSD on a hard disk} 892 1.3.2.2 tls message Re_install_sets_or_install_additional_sets {Re-install sets or install additional sets} 893 1.3.2.2 tls message Reboot_the_computer {Reboot the computer} 894 1.3.2.2 tls message Utility_menu {Utility menu} 895 1.3.2.2 tls message Config_menu {Config menu} 896 1.3.2.2 tls message exit_utility_menu {Back to main menu} 897 1.3.2.2 tls message exit_menu_generic {Exit} 898 1.3.2.2 tls message NetBSD_VERSION_Utilities {NetBSD-@@VERSION@@ Utilities} 899 1.3.2.2 tls message Run_bin_sh {Run /bin/sh} 900 1.3.2.2 tls message Set_timezone {Set timezone} 901 1.3.2.2 tls message Configure_network {Configure network} 902 1.3.2.2 tls message Partition_a_disk {Partition a disk} 903 1.3.2.2 tls message Logging_functions {Logging functions} 904 1.3.2.2 tls message Halt_the_system {Halt the system} 905 1.3.2.2 tls message yes_or_no {yes or no?} 906 1.3.2.2 tls message Hit_enter_to_continue {Hit enter to continue} 907 1.3.2.2 tls message Choose_your_installation {Choose your installation} 908 1.3.2.2 tls message Set_Sizes {Set sizes of NetBSD partitions} 909 1.3.2.2 tls message Use_Existing {Use existing partition sizes} 910 1.3.2.2 tls message Megabytes {Megabytes} 911 1.3.2.2 tls message Cylinders {Cylinders} 912 1.3.2.2 tls message Sectors {Sectors} 913 1.3.2.2 tls message Select_medium {Install from} 914 1.3.2.2 tls message ftp {FTP} 915 1.3.2.2 tls message http {HTTP} 916 1.3.2.2 tls message nfs {NFS} 917 1.3.2.2 tls .if HAVE_INSTALL_IMAGE 918 1.3.2.2 tls message cdrom {CD-ROM / DVD / install image media} 919 1.3.2.2 tls .else 920 1.3.2.2 tls message cdrom {CD-ROM / DVD} 921 1.3.2.2 tls .endif 922 1.3.2.2 tls message floppy {Floppy} 923 1.3.2.2 tls message local_fs {Unmounted fs} 924 1.3.2.2 tls message local_dir {Local directory} 925 1.3.2.2 tls message Select_your_distribution {Select your distribution} 926 1.3.2.2 tls message Full_installation {Full installation} 927 1.3.2.2 tls message Full_installation_nox {Installation without X11} 928 1.3.2.2 tls message Minimal_installation {Minimal installation} 929 1.3.2.2 tls message Custom_installation {Custom installation} 930 1.3.2.2 tls message hidden {** hidden **} 931 1.3.2.2 tls message Host {Host} 932 1.3.2.2 tls message Base_dir {Base directory} 933 1.3.2.2 tls message Set_dir_bin {Binary set directory} 934 1.3.2.2 tls message Set_dir_src {Source set directory} 935 1.3.2.2 tls message Xfer_dir {Transfer directory} 936 1.3.2.2 tls message User {User} 937 1.3.2.2 tls message Password {Password} 938 1.3.2.2 tls message Proxy {Proxy} 939 1.3.2.2 tls message Get_Distribution {Get Distribution} 940 1.3.2.2 tls message Continue {Continue} 941 1.3.2.2 tls message What_do_you_want_to_do {What do you want to do?} 942 1.3.2.2 tls message Try_again {Try again} 943 1.3.2.2 tls message Set_finished {Set finished} 944 1.3.2.2 tls message Skip_set {Skip set} 945 1.3.2.2 tls message Skip_group {Skip set group} 946 1.3.2.2 tls message Abandon {Abandon installation} 947 1.3.2.2 tls message Abort_fetch {Abort fetch} 948 1.3.2.2 tls message Device {Device} 949 1.3.2.2 tls message File_system {File system} 950 1.3.2.2 tls message Select_IPv6_DNS_server { Select IPv6 DNS server} 951 1.3.2.2 tls message other {other } 952 1.3.2.2 tls message Perform_IPv6_autoconfiguration {Perform IPv6 autoconfiguration?} 953 1.3.2.2 tls message Perform_DHCP_autoconfiguration {Perform DHCP autoconfiguration?} 954 1.3.2.2 tls message Root_shell {Root shell} 955 1.3.2.2 tls message User_shell {User shell} 956 1.3.2.2 tls message Color_scheme {Color scheme} 957 1.3.2.2 tls message White_on_black {White on black} 958 1.3.2.2 tls message Black_on_white {Black on white} 959 1.3.2.2 tls message White_on_blue {White on blue} 960 1.3.2.2 tls message Green_on_black {Green on black} 961 1.3.2.2 tls 962 1.3.2.2 tls .if AOUT2ELF 963 1.3.2.2 tls message aoutfail 964 1.3.2.2 tls {The directory where the old a.out shared libraries should be moved to could 965 1.3.2.2 tls not be created. Please try the upgrade procedure again and make sure you 966 1.3.2.2 tls have mounted all file systems.} 967 1.3.2.2 tls 968 1.3.2.2 tls message emulbackup 969 1.3.2.2 tls {Either the /emul/aout or /emul directory on your system was a symbolic link 970 1.3.2.2 tls pointing to an unmounted file system. It has been given a '.old' extension. 971 1.3.2.2 tls Once you bring your upgraded system back up, you may need to take care 972 1.3.2.2 tls of merging the newly created /emul/aout directory with the old one. 973 1.3.2.2 tls } 974 1.3.2.2 tls .endif 975 1.3.2.2 tls 976 1.3.2.2 tls message oldsendmail 977 1.3.2.2 tls {Sendmail is no longer in this release of NetBSD, default MTA is 978 1.3.2.2 tls postfix. The file /etc/mailer.conf still chooses the removed 979 1.3.2.2 tls sendmail. Do you want to upgrade /etc/mailer.conf automatically for 980 1.3.2.2 tls postfix? If you choose "No" you will have to update /etc/mailer.conf 981 1.3.2.2 tls yourself to ensure proper email delivery.} 982 1.3.2.2 tls 983 1.3.2.2 tls message license 984 1.3.2.2 tls {To use the network interface %s, you must agree to the license in 985 1.3.2.2 tls file %s. To view this file now, you can type ^Z, look at the contents of 986 1.3.2.2 tls the file and then type "fg" to resume.} 987 1.3.2.2 tls 988 1.3.2.2 tls message binpkg 989 1.3.2.2 tls {To configure the binary package system, please choose the network location 990 1.3.2.2 tls to fetch packages from. Once your system comes up, you can use 'pkgin' 991 1.3.2.2 tls to install additional packages, or remove packages.} 992 1.3.2.2 tls 993 1.3.2.2 tls message pkgpath 994 1.3.2.2 tls {Enabling binary packages with pkgin requires setting up the repository. 995 1.3.2.2 tls The following are the host, directory, user, and password that 996 1.3.2.2 tls will be used. If "user" is "ftp", then the password is not needed. 997 1.3.2.2 tls 998 1.3.2.2 tls } 999 1.3.2.2 tls message rcconf_backup_failed {Making backup of rc.conf failed. Continue?} 1000 1.3.2.2 tls message rcconf_backup_succeeded {rc.conf backup saved to %s.} 1001 1.3.2.2 tls message rcconf_restore_failed {Restoring backup rc.conf failed.} 1002 1.3.2.2 tls message rcconf_delete_failed {Deleting old %s entry failed.} 1003 1.3.2.2 tls message Pkg_dir {Package directory} 1004 1.3.2.2 tls message configure_prior {configure a prior installation of} 1005 1.3.2.2 tls message configure {configure} 1006 1.3.2.2 tls message change {change} 1007 1.3.2.2 tls message password_set {password set} 1008 1.3.2.2 tls message YES {YES} 1009 1.3.2.2 tls message NO {NO} 1010 1.3.2.2 tls message DONE {DONE} 1011 1.3.2.2 tls message abandoned {Abandoned} 1012 1.3.2.2 tls message empty {***EMPTY***} 1013 1.3.2.2 tls message timezone {Timezone} 1014 1.3.2.2 tls message change_rootpw {Change root password} 1015 1.3.2.2 tls message enable_binpkg {Enable installation of binary packages} 1016 1.3.2.2 tls message enable_sshd {Enable sshd} 1017 1.3.2.2 tls message enable_ntpd {Enable ntpd} 1018 1.3.2.2 tls message run_ntpdate {Run ntpdate at boot} 1019 1.3.2.2 tls message enable_mdnsd {Enable mdnsd} 1020 1.3.2.2 tls message enable_xdm {Enable xdm} 1021 1.3.2.2 tls message enable_cgd {Enable cgd} 1022 1.3.2.2 tls message enable_lvm {Enable lvm} 1023 1.3.2.2 tls message enable_raid {Enable raidframe} 1024 1.3.2.2 tls message add_a_user {Add a user} 1025 1.3.2.2 tls message configmenu {Configure the additional items as needed.} 1026 1.3.2.2 tls message doneconfig {Finished configuring} 1027 1.3.2.2 tls message Install_pkgin {Install pkgin and update package summary} 1028 1.3.2.2 tls message binpkg_installed 1029 1.3.2.2 tls {Your system is now configured to use pkgin to install binary packages. To 1030 1.3.2.2 tls install a package, run: 1031 1.3.2.2 tls 1032 1.3.2.2 tls pkgin install <packagename> 1033 1.3.2.2 tls 1034 1.3.2.2 tls from a root shell. Read the pkgin(1) manual page for further information.} 1035 1.3.2.2 tls message Install_pkgsrc {Fetch and unpack pkgsrc} 1036 1.3.2.2 tls message pkgsrc 1037 1.3.2.2 tls {Installing pkgsrc requires unpacking an archive retrieved over the network. 1038 1.3.2.2 tls The following are the host, directory, user, and password that 1039 1.3.2.2 tls will be used. If "user" is "ftp", then the password is not needed. 1040 1.3.2.2 tls 1041 1.3.2.2 tls } 1042 1.3.2.2 tls message Pkgsrc_dir {pkgsrc directory} 1043 1.3.2.2 tls message get_pkgsrc {Fetch and unpack pkgsrc for building from source} 1044 1.3.2.2 tls message retry_pkgsrc_network {Network configuration failed. Retry?} 1045 1.3.2.2 tls message quit_pkgsrc {Quit without installing pkgsrc} 1046 1.3.2.2 tls message quit_pkgs_install {Quit installing binary pkgs} 1047 1.3.2.2 tls message pkgin_failed 1048 1.3.2.2 tls {Installation of pkgin failed, possibly because no binary packages 1049 1.3.2.2 tls exist. Please check the package path and try again.} 1050 1.3.2.2 tls message failed {Failed} 1051 1.3.2.2 tls 1052 1.3.2.2 tls message notsupported {Operation not supported!} 1053 1.3.2.2 tls message askfsmountadv {Mountpoint or 'raid' or 'cgd' or 'lvm'?} 1054 1.3.2.2 tls message partman {Extended partitioning} 1055 1.3.2.2 tls message editbsdpart {Edit BSD partitions} 1056 1.3.2.2 tls message editmbr {Edit and save MBR} 1057 1.3.2.2 tls message switchgpt {Switch to GPT} 1058 1.3.2.2 tls message switchmbr {Switch to MBR} 1059 1.3.2.2 tls message renamedisk {Set disk name} 1060 1.3.2.2 tls message fmtasraid {Format as RAID} 1061 1.3.2.2 tls message fmtaslvm {Format as LVM PV} 1062 1.3.2.2 tls message encrypt {Encrypt} 1063 1.3.2.2 tls message setbootable {Bootable flag} 1064 1.3.2.2 tls message erase {Safe erase} 1065 1.3.2.2 tls message undo {Undo changes} 1066 1.3.2.2 tls message unconfig {Unconfigure} 1067 1.3.2.2 tls message edit {Edit} 1068 1.3.2.2 tls message doumount {Force umount} 1069 1.3.2.2 tls message fillzeros {Fill by zeros} 1070 1.3.2.2 tls message fillrandom {Fill by random data} 1071 1.3.2.2 tls message fillcrypto {Fill by crypto data} 1072 1.3.2.2 tls message raid0 {0 - No parity, only simple striping.} 1073 1.3.2.2 tls message raid1 {1 - Mirroring. The parity is the mirror.} 1074 1.3.2.2 tls message raid4 {4 - Striping with parity stored on the last component.} 1075 1.3.2.2 tls message raid5 {5 - Striping with parity at the all components.} 1076 1.3.2.2 tls 1077 1.3.2.2 tls message fremove {REMOVE} 1078 1.3.2.2 tls message remove {Remove} 1079 1.3.2.2 tls message add {Add} 1080 1.3.2.2 tls message auto {auto} 1081 1.3.2.2 tls 1082 1.3.2.2 tls message removepartswarn {This remove all partitions on disk. Do you want to continue?} 1083 1.3.2.2 tls message saveprompt {Save changes before finishing?} 1084 1.3.2.2 tls message cantsave {Changes cannot be saved.} 1085 1.3.2.2 tls message noroot {No root partition defined, cannot continue\n} 1086 1.3.2.2 tls message wannaunblock { 1087 1.3.2.2 tls Device is blocked. It's editing may cause problems. 1088 1.3.2.2 tls Do you want to force unblock it and continue?} 1089 1.3.2.2 tls message wannatry {Do you want to try?} 1090 1.3.2.2 tls message create_cgd {Create cryptographic volume (CGD)} 1091 1.3.2.2 tls message create_cnd {Create virtual disk image (VND)} 1092 1.3.2.2 tls message create_vg {Create volume group (LVM VG)} 1093 1.3.2.2 tls message create_lv { Create logical volume} 1094 1.3.2.2 tls message create_raid {Create software RAID} 1095 1.3.2.2 tls message updpmlist {Update devices list} 1096 1.3.2.2 tls message savepm {Save changes} 1097 1.3.2.2 tls message pmblocked {BLOCKED} 1098 1.3.2.2 tls message pmunchanged {UNCHANGED} 1099 1.3.2.2 tls message pmsetboot {BOOT} 1100 1.3.2.2 tls message pmused {USED} 1101 1.3.2.2 tls message pmmounted {(mounted)} 1102 1.3.2.2 tls message pmunused {(unused)} 1103 1.3.2.2 tls message pmgptdisk {GPT-labeled disk} 1104 1.3.2.2 tls 1105 1.3.2.2 tls message finishpm {Finish partitioning} 1106 1.3.2.2 tls message limitcount {Limit for the devices count was reached!} 1107 1.3.2.2 tls message invaliddev {Invalid device!} 1108 1.3.2.2 tls message avdisks {Available disks:} 1109 1.3.2.2 tls message nofreedev {Cannot allocate device node!} 1110 1.3.2.2 tls message partman_header 1111 1.3.2.2 tls {Partition manager. All disks, partitions and etc. displayed there. 1112 1.3.2.2 tls At first make MBR partitions, then make BSD label. If you want to use RAID, 1113 1.3.2.2 tls LVM or CGD, follow these steps: 1) Create BSD partitions with needed type; 1114 1.3.2.2 tls 2) Create RAID/LVM VG/CGD using these partitions; 3) Save it; 1115 1.3.2.2 tls 4) Create partitions for RAID/CGD or Logical Volumes for LVM.} 1116 1.3.2.2 tls 1117 1.3.2.2 tls message raid_menufmt { raid%d (level %1d) on %-34s %11uM} 1118 1.3.2.2 tls message raid_err_menufmt { EMPTY RAID!} 1119 1.3.2.2 tls message raid_disks_fmt {Disks: %33s} 1120 1.3.2.2 tls message raid_spares_fmt {Spares: %32s} 1121 1.3.2.2 tls message raid_level_fmt {RAID level: %22d} 1122 1.3.2.2 tls message raid_numrow_fmt {numRow: %22d} 1123 1.3.2.2 tls message raid_numcol_fmt {numCol: %22d} 1124 1.3.2.2 tls message raid_numspare_fmt {numSpare: %22d} 1125 1.3.2.2 tls message raid_sectpersu_fmt {sectPerSU: %22d} 1126 1.3.2.2 tls message raid_superpar_fmt {SUsPerParityUnit: %22d} 1127 1.3.2.2 tls message raid_superrec_fmt {SUsPerReconUnit: %22d} 1128 1.3.2.2 tls message raid_nomultidim {Multi-dimensional arrays are NOT supported!} 1129 1.3.2.2 tls message raid_numrow_ask {numRow?} 1130 1.3.2.2 tls message raid_numcol_ask {numCol?} 1131 1.3.2.2 tls message raid_numspare_ask {numSpare?} 1132 1.3.2.2 tls message raid_sectpersu_ask {sectPerSU?} 1133 1.3.2.2 tls message raid_superpar_ask {SUsPerParityUnit?} 1134 1.3.2.2 tls message raid_superrec_ask {SUsPerReconUnit?} 1135 1.3.2.2 tls message raid_disks {Disks in RAID:} 1136 1.3.2.2 tls message vnd_err_menufmt { PATH NOT DEFINED!} 1137 1.3.2.2 tls message vnd_assgn_menufmt { vnd%1d on %-51s ASSIGN} 1138 1.3.2.2 tls message vnd_menufmt { vnd%1d on %-45s %11uM} 1139 1.3.2.2 tls message vnd_path_fmt {File path: %29s} 1140 1.3.2.2 tls message vnd_assgn_fmt {Assign exist image: %20s} 1141 1.3.2.2 tls message vnd_size_fmt {Size: %22sM} 1142 1.3.2.2 tls message vnd_ro_fmt {Read-only: %22s} 1143 1.3.2.2 tls message vnd_geom_fmt {Set geometry by hand: %18s} 1144 1.3.2.2 tls message vnd_bps_fmt {Bytes per Sector: %18s} 1145 1.3.2.2 tls message vnd_spt_fmt {Sectors per Track: %18s} 1146 1.3.2.2 tls message vnd_tpc_fmt {Tracks per Cylinder: %18s} 1147 1.3.2.2 tls message vnd_cyl_fmt {Cylinders: %22s} 1148 1.3.2.2 tls message vnd_path_ask {File path?} 1149 1.3.2.2 tls message vnd_size_ask {Size (MB)?} 1150 1.3.2.2 tls message vnd_bps_ask {Bytes per Sector?} 1151 1.3.2.2 tls message vnd_spt_ask {Sectors per Track?} 1152 1.3.2.2 tls message vnd_tpc_ask {Tracks per Cylinder?} 1153 1.3.2.2 tls message vnd_cyl_ask {Cylinders?} 1154 1.3.2.2 tls message cgd_err_menufmt { DISK NOT DEFINED!} 1155 1.3.2.2 tls message cgd_menufmt { cgd%1d %-48s %11uM} 1156 1.3.2.2 tls message cgd_dev_fmt {Base device: %24s} 1157 1.3.2.2 tls message cgd_enc_fmt {Encyption: %24s} 1158 1.3.2.2 tls message cgd_key_fmt {Key size: %24d} 1159 1.3.2.2 tls message cgd_iv_fmt {IV algorithm: %24s} 1160 1.3.2.2 tls message cgd_keygen_fmt {Key generation: %24s} 1161 1.3.2.2 tls message cgd_verif_fmt {Verification method: %17s} 1162 1.3.2.2 tls message lvm_disks {Disks in VG:} 1163 1.3.2.2 tls message lvm_menufmt { %-44s %20sM} 1164 1.3.2.2 tls message lvm_err_menufmt { EMPTY VG!} 1165 1.3.2.2 tls message lvm_disks_fmt {PV's: %34s} 1166 1.3.2.2 tls message lvm_name_fmt {Name: %34s} 1167 1.3.2.2 tls message lvm_maxlv_fmt {MaxLogicalVolumes: %20s} 1168 1.3.2.2 tls message lvm_maxpv_fmt {MaxPhysicalVolumes: %20s} 1169 1.3.2.2 tls message lvm_extsiz_fmt {PhysicalExtentSize: %20s} 1170 1.3.2.2 tls message lvm_name_ask {Name?} 1171 1.3.2.2 tls message lvm_maxlv_ask {MaxLogicalVolumes?} 1172 1.3.2.2 tls message lvm_maxpv_ask {MaxPhysicalVolumes?} 1173 1.3.2.2 tls message lvm_extsiz_ask {PhysicalExtentSize (MB)?} 1174 1.3.2.2 tls message lvmlv_menufmt { Logical volume %-35s %11uM} 1175 1.3.2.2 tls message lvmlv_name_fmt {Name: %34s} 1176 1.3.2.2 tls message lvmlv_size_fmt {Size: %33dM} 1177 1.3.2.2 tls message lvmlv_ro_fmt {Read-only: %27s} 1178 1.3.2.2 tls message lvmlv_cont_fmt {Contiguous: %27s} 1179 1.3.2.2 tls message lvmlv_extnum_fmt {LogicalExtentsNumber: %18s} 1180 1.3.2.2 tls message lvmlv_minor_fmt {Minor number: %26s} 1181 1.3.2.2 tls message lvmlv_mirrors_fmt {Mirrors: %27d} 1182 1.3.2.2 tls message lvmlv_regsiz_fmt {MirrorLogRegionSize: %18s} 1183 1.3.2.2 tls message lvmlv_pers_fmt {Persistent minor number: %14s} 1184 1.3.2.2 tls message lvmlv_readahsect_fmt {ReadAheadSectors: %18s} 1185 1.3.2.2 tls message lvmlv_stripes_fmt {Stripes: %27s} 1186 1.3.2.2 tls message lvmlv_stripesiz_fmt {StripeSize: %27s} 1187 1.3.2.2 tls message lvmlv_zero_fmt {Zeroing of the first KB: %13s} 1188 1.3.2.2 tls message lvmlv_name_ask {Name?} 1189 1.3.2.2 tls message lvmlv_size_ask {Size (MB)?} 1190 1.3.2.2 tls message lvmlv_extnum_ask {LogicalExtentsNumber?} 1191 1.3.2.2 tls message lvmlv_minor_ask {Minor number?} 1192 1.3.2.2 tls message lvmlv_mirrors_ask {Mirrors?} 1193 1.3.2.2 tls message lvmlv_regsiz_ask {MirrorLogRegionSize?} 1194 1.3.2.2 tls message lvmlv_readahsect_ask {ReadAheadSectors?} 1195 1.3.2.2 tls message lvmlv_stripes_ask {Stripes?} 1196 1.3.2.2 tls 1197 1.3.2.2 tls message addusername {8 character username to add:} 1198 1.3.2.2 tls message addusertowheel {Do you wish to add this user to group wheel?} 1199 1.3.2.2 tls 1200 1.3.2.2 tls message Delete_partition 1201 1.3.2.2 tls {Delete partition} 1202 1.3.2.2 tls 1203
Indexes created Thu Oct 23 22:10:10 GMT 2025