selection.c revision 1.7 1 /* $NetBSD: selection.c,v 1.7 2004/01/05 12:01:52 jmmv Exp $ */
2
3 /*
4 * Copyright (c) 2002, 2003, 2004 The NetBSD Foundation, Inc.
5 * All rights reserved.
6 *
7 * This code is derived from software contributed to The NetBSD Foundation
8 * by Julio M. Merino Vidal.
9 *
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
12 * are met:
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer.
15 * 2. The name authors may not be used to endorse or promote products
16 * derived from this software without specific prior written
17 * permission.
18 *
19 * THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS
20 * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
21 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY
23 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
25 * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
27 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
28 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
29 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 */
31
32 #include <sys/cdefs.h>
33
34 #ifndef lint
35 __RCSID("$NetBSD: selection.c,v 1.7 2004/01/05 12:01:52 jmmv Exp $");
36 #endif /* not lint */
37
38 #include <sys/ioctl.h>
39 #include <sys/time.h>
40 #include <sys/types.h>
41 #include <sys/tty.h>
42 #include <dev/wscons/wsconsio.h>
43
44 #include <ctype.h>
45 #include <err.h>
46 #include <fcntl.h>
47 #include <stdbool.h>
48 #include <stdio.h>
49 #include <stdlib.h>
50 #include <string.h>
51 #include <unistd.h>
52
53 #include "pathnames.h"
54 #include "wsmoused.h"
55
56 /* ---------------------------------------------------------------------- */
57
58 /*
59 * Public interface exported by the `selection' mode.
60 */
61
62 int selection_startup(struct mouse *m);
63 int selection_cleanup(void);
64 void selection_wsmouse_event(struct wscons_event);
65 void selection_wscons_event(struct wscons_event, bool);
66 void selection_poll_timeout(void);
67
68 struct mode_bootstrap Selection_Mode = {
69 "selection",
70 selection_startup,
71 selection_cleanup,
72 selection_wsmouse_event,
73 selection_wscons_event,
74 selection_poll_timeout
75 };
76
77 /* ---------------------------------------------------------------------- */
78
79 /*
80 * Structures used in this module only.
81 */
82
83 /* The `selarea' structure is used to describe a selection in the screen.
84 It also holds a copy of the selected text. */
85 struct selarea {
86 size_t sa_x1; /* Start column */
87 size_t sa_y1; /* Start row */
88 size_t sa_x2; /* End column */
89 size_t sa_y2; /* End row */
90 size_t sa_startoff; /* Absolute offset of start position */
91 size_t sa_endoff; /* Absolute offset of end position */
92 size_t sa_buflen; /* Length of selected text */
93 char *sa_buf; /* A copy of the selected text */
94 };
95
96 /* The `selmouse' structure extends the `mouse' structure adding all fields
97 required for this module to work. */
98 struct selmouse {
99 struct mouse *sm_mouse; /* Pointer to parent structure */
100
101 int sm_ttyfd; /* Active TTY file descriptor */
102
103 size_t sm_x; /* Mouse pointer column */
104 size_t sm_y; /* Mouse pointer row */
105 size_t sm_max_x; /* Maximun column allowed */
106 size_t sm_max_y; /* Maximun row allowed */
107
108 size_t sm_slowdown_x; /* X axis slowdown */
109 size_t sm_slowdown_y; /* Y axis slowdown */
110 size_t sm_count_x; /* Number of X movements skipped */
111 size_t sm_count_y; /* Number of Y movements skipped */
112
113 int sm_visible; /* Whether pointer is visible or not */
114 int sm_selecting; /* Whether we are selecting or not */
115
116 int sm_but_select; /* Button number to select an area */
117 int sm_but_paste; /* Button number to paste buffer */
118 };
119
120 /* ---------------------------------------------------------------------- */
121
122 /*
123 * Global variables.
124 */
125
126 static struct selmouse Selmouse;
127 static struct selarea Selarea;
128 static int Initialized = 0;
129
130 /* ---------------------------------------------------------------------- */
131
132 /*
133 * Prototypes for functions private to this module.
134 */
135
136 static void cursor_hide(void);
137 static void cursor_show(void);
138 static void open_tty(int);
139 static void char_invert(size_t, size_t);
140 static void *alloc_sel(size_t);
141 static char *fill_buf(char *, size_t, size_t, size_t);
142 static size_t row_length(size_t);
143 static void selarea_copy_text(void);
144 static void selarea_start(void);
145 static void selarea_end(void);
146 static void selarea_calculate(void);
147 static void selarea_hide(void);
148 static void selarea_show(void);
149 static void selarea_paste(void);
150
151 /* ---------------------------------------------------------------------- */
152
153 /* Mode initialization. Reads configuration, checks if the kernel has
154 * support for mouse pointer and opens required files. */
155 int
156 selection_startup(struct mouse *m)
157 {
158 int i;
159 struct winsize ws;
160 struct wsdisplay_char ch;
161 struct block *conf;
162
163 if (Initialized) {
164 log_warnx("selection mode already initialized");
165 return 1;
166 }
167
168 (void)memset(&Selmouse, 0, sizeof(struct selmouse));
169 Selmouse.sm_mouse = m;
170
171 conf = config_get_mode("selection");
172 Selmouse.sm_slowdown_x = block_get_propval_int(conf, "slowdown_x", 0);
173 Selmouse.sm_slowdown_y = block_get_propval_int(conf, "slowdown_y", 3);
174 if (block_get_propval_int(conf, "lefthanded", 0)) {
175 Selmouse.sm_but_select = 2;
176 Selmouse.sm_but_paste = 0;
177 } else {
178 Selmouse.sm_but_select = 0;
179 Selmouse.sm_but_paste = 2;
180 }
181
182 /* Get terminal size */
183 if (ioctl(0, TIOCGWINSZ, &ws) < 0) {
184 log_warn("cannot get terminal size");
185 return 0;
186 }
187
188 /* Open current tty */
189 (void)ioctl(Selmouse.sm_mouse->m_statfd, WSDISPLAYIO_GETACTIVESCREEN,
190 &i);
191 Selmouse.sm_ttyfd = -1;
192 open_tty(i);
193
194 /* Check if the kernel has character functions */
195 ch.row = ch.col = 0;
196 if (ioctl(Selmouse.sm_ttyfd, WSDISPLAYIO_GETWSCHAR, &ch) < 0) {
197 (void)close(Selmouse.sm_ttyfd);
198 log_warn("ioctl(WSDISPLAYIO_GETWSCHAR) failed");
199 return 0;
200 }
201
202 Selmouse.sm_max_y = ws.ws_row - 1;
203 Selmouse.sm_max_x = ws.ws_col - 1;
204 Selmouse.sm_y = Selmouse.sm_max_y / 2;
205 Selmouse.sm_x = Selmouse.sm_max_x / 2;
206 Selmouse.sm_count_y = 0;
207 Selmouse.sm_count_x = 0;
208 Selmouse.sm_visible = 0;
209 Selmouse.sm_selecting = 0;
210 Initialized = 1;
211
212 return 1;
213 }
214
215 /* ---------------------------------------------------------------------- */
216
217 /* Mode cleanup. */
218 int
219 selection_cleanup(void)
220 {
221
222 cursor_hide();
223 if (Selmouse.sm_ttyfd >= 0)
224 (void)close(Selmouse.sm_ttyfd);
225 return 1;
226 }
227
228 /* ---------------------------------------------------------------------- */
229
230 /* Parse wsmouse events. Both motion and button events are handled. The
231 * former move the mouse across the screen and the later create a new
232 * selection or paste the buffer. */
233 void
234 selection_wsmouse_event(struct wscons_event evt)
235 {
236
237 if (IS_MOTION_EVENT(evt.type)) {
238 if (Selmouse.sm_selecting)
239 selarea_hide();
240 cursor_hide();
241
242 switch (evt.type) {
243 case WSCONS_EVENT_MOUSE_DELTA_X:
244 if (Selmouse.sm_count_x >= Selmouse.sm_slowdown_x) {
245 Selmouse.sm_count_x = 0;
246 if (evt.value > 0)
247 Selmouse.sm_x++;
248 else if (Selmouse.sm_x != 0)
249 Selmouse.sm_x--;
250 if (Selmouse.sm_x > Selmouse.sm_max_x)
251 Selmouse.sm_x = Selmouse.sm_max_x;
252 } else
253 Selmouse.sm_count_x++;
254 break;
255
256 case WSCONS_EVENT_MOUSE_DELTA_Y:
257 if (Selmouse.sm_count_y >= Selmouse.sm_slowdown_y) {
258 Selmouse.sm_count_y = 0;
259 if (evt.value < 0)
260 Selmouse.sm_y++;
261 else if (Selmouse.sm_y != 0)
262 Selmouse.sm_y--;
263 if (Selmouse.sm_y > Selmouse.sm_max_y)
264 Selmouse.sm_y = Selmouse.sm_max_y;
265 } else
266 Selmouse.sm_count_y++;
267 break;
268
269 case WSCONS_EVENT_MOUSE_DELTA_Z:
270 break;
271
272 default:
273 log_warnx("unknown event");
274 }
275
276 if (Selmouse.sm_selecting)
277 selarea_show();
278 cursor_show();
279
280 } else if (IS_BUTTON_EVENT(evt.type)) {
281 switch (evt.type) {
282 case WSCONS_EVENT_MOUSE_UP:
283 if (evt.value == Selmouse.sm_but_select) {
284 /* End selection */
285 selarea_end();
286 selarea_hide();
287 }
288 break;
289
290 case WSCONS_EVENT_MOUSE_DOWN:
291 if (evt.value == Selmouse.sm_but_select) {
292 /* Start selection */
293 selarea_start();
294 cursor_hide();
295 selarea_show();
296 } else if (evt.value == Selmouse.sm_but_paste) {
297 /* Paste selection */
298 selarea_paste();
299 break;
300 }
301 break;
302
303 default:
304 log_warnx("unknown button event");
305 }
306 }
307 }
308
309 /* ---------------------------------------------------------------------- */
310
311 /* Parse wscons status events. */
312 void
313 selection_wscons_event(struct wscons_event evt, bool preclose)
314 {
315
316 switch (evt.type) {
317 case WSCONS_EVENT_SCREEN_SWITCH:
318 if (preclose) {
319 if (Selmouse.sm_selecting)
320 selarea_hide();
321 cursor_hide();
322 } else {
323 if (!Selmouse.sm_mouse->m_disabled)
324 open_tty(evt.value);
325
326 cursor_show();
327 if (Selmouse.sm_selecting)
328 selarea_show();
329 }
330
331 break;
332 }
333 }
334
335 /* ---------------------------------------------------------------------- */
336
337 /* Device polling has timed out, so we hide the mouse to avoid further
338 * console pollution. */
339 void
340 selection_poll_timeout(void)
341 {
342
343 if (!Selmouse.sm_selecting)
344 cursor_hide();
345 }
346
347 /* ---------------------------------------------------------------------- */
348
349 /* Hides the mouse pointer, if visible. */
350 static void
351 cursor_hide(void)
352 {
353
354 if (Selmouse.sm_visible) {
355 char_invert(Selmouse.sm_y, Selmouse.sm_x);
356 Selmouse.sm_visible = 0;
357 }
358 }
359
360 /* ---------------------------------------------------------------------- */
361
362 /* Shows the mouse pointer, if not visible. */
363 static void
364 cursor_show(void)
365 {
366
367 if (!Selmouse.sm_visible) {
368 char_invert(Selmouse.sm_y, Selmouse.sm_x);
369 Selmouse.sm_visible = 1;
370 }
371 }
372
373 /* ---------------------------------------------------------------------- */
374
375 /* Opens the specified TTY device, used when switching consoles. */
376 static void
377 open_tty(int ttyno)
378 {
379 char buf[20];
380
381 if (Selmouse.sm_ttyfd >= 0)
382 (void)close(Selmouse.sm_ttyfd);
383
384 (void)snprintf(buf, sizeof(buf), _PATH_TTYPREFIX "%d", ttyno);
385 Selmouse.sm_ttyfd = open(buf, O_RDONLY | O_NONBLOCK);
386 if (Selmouse.sm_ttyfd < 0)
387 log_warnx("cannot open %s", buf);
388 }
389
390 /* ---------------------------------------------------------------------- */
391
392 /* Flips the background and foreground colors of the specified screen
393 * position. */
394 static void
395 char_invert(size_t row, size_t col)
396 {
397 int t;
398 struct wsdisplay_char ch;
399
400 ch.row = row;
401 ch.col = col;
402
403 if (ioctl(Selmouse.sm_ttyfd, WSDISPLAYIO_GETWSCHAR, &ch) == -1) {
404 log_warn("ioctl(WSDISPLAYIO_GETWSCHAR) failed");
405 return;
406 }
407
408 t = ch.foreground;
409 ch.foreground = ch.background;
410 ch.background = t;
411
412 if (ioctl(Selmouse.sm_ttyfd, WSDISPLAYIO_PUTWSCHAR, &ch) == -1)
413 log_warn("ioctl(WSDISPLAYIO_PUTWSCHAR) failed");
414 }
415
416 /* ---------------------------------------------------------------------- */
417
418 /* Allocates memory for a selection. This function is very simple but is
419 * used to get a consistent warning message. */
420 static void *
421 alloc_sel(size_t len)
422 {
423 void *ptr;
424
425 ptr = malloc(len);
426 if (ptr == NULL)
427 log_warn("cannot allocate memory for selection (%lu bytes)",
428 (unsigned long)len);
429 return ptr;
430 }
431
432 /* ---------------------------------------------------------------------- */
433
434 /* Copies a region of a line inside the buffer pointed by `ptr'. */
435 static char *
436 fill_buf(char *ptr, size_t row, size_t col, size_t end)
437 {
438 struct wsdisplay_char ch;
439
440 ch.row = row;
441 for (ch.col = col; ch.col < end; ch.col++) {
442 if (ioctl(Selmouse.sm_ttyfd, WSDISPLAYIO_GETWSCHAR,
443 &ch) == -1) {
444 log_warn("ioctl(WSDISPLAYIO_GETWSCHAR) failed");
445 *ptr++ = ' ';
446 } else {
447 *ptr++ = ch.letter;
448 }
449 }
450 return ptr;
451 }
452
453 /* ---------------------------------------------------------------------- */
454
455 /* Scans the specified line and checks its length. Characters at the end
456 * of it which match isspace() are discarded. */
457 static size_t
458 row_length(size_t row)
459 {
460 struct wsdisplay_char ch;
461
462 ch.col = Selmouse.sm_max_x;
463 ch.row = row;
464 do {
465 if (ioctl(Selmouse.sm_ttyfd, WSDISPLAYIO_GETWSCHAR, &ch) == -1)
466 log_warn("ioctl(WSDISPLAYIO_GETWSCHAR) failed");
467 ch.col--;
468 } while (isspace((unsigned char)ch.letter) && ch.col >= 0);
469 return ch.col + 2;
470 }
471
472 /* ---------------------------------------------------------------------- */
473
474 /* Copies all the text selected to the selection buffer. Whitespace at
475 * end of lines is trimmed. */
476 static void
477 selarea_copy_text(void)
478 {
479 char *ptr, *str;
480 size_t l, r;
481
482 if (Selarea.sa_y1 == Selarea.sa_y2) {
483 /* Selection is one row */
484 l = row_length(Selarea.sa_y1);
485 if (Selarea.sa_x1 > l)
486 /* Selection is after last character,
487 * therefore it is empty */
488 str = NULL;
489 else {
490 if (Selarea.sa_x2 > l)
491 Selarea.sa_x2 = l;
492 ptr = str =
493 alloc_sel(Selarea.sa_x2 - Selarea.sa_x1 + 1);
494 if (ptr == NULL)
495 return;
496
497 ptr = fill_buf(ptr, Selarea.sa_y1, Selarea.sa_x1,
498 Selarea.sa_x2);
499 *ptr = '\0';
500 }
501 } else {
502 /* Selection is multiple rows */
503 ptr = str =
504 alloc_sel(Selarea.sa_endoff - Selarea.sa_startoff + 1);
505 if (ptr == NULL)
506 return;
507
508 /* Calculate and copy first line */
509 l = row_length(Selarea.sa_y1);
510 if (Selarea.sa_x1 < l) {
511 ptr = fill_buf(ptr, Selarea.sa_y1, Selarea.sa_x1, l);
512 *ptr++ = '\r';
513 }
514
515 /* Copy mid lines if there are any */
516 if ((Selarea.sa_y2 - Selarea.sa_y1) > 1) {
517 for (r = Selarea.sa_y1 + 1; r <= Selarea.sa_y2 - 1;
518 r++) {
519 ptr = fill_buf(ptr, r, 0, row_length(r));
520 *ptr++ = '\r';
521 }
522 }
523
524 /* Calculate and copy end line */
525 l = row_length(Selarea.sa_y2);
526 if (Selarea.sa_x2 < l)
527 l = Selarea.sa_x2;
528 ptr = fill_buf(ptr, Selarea.sa_y2, 0, l);
529 *ptr = '\0';
530 }
531
532 if (Selarea.sa_buf != NULL) {
533 free(Selarea.sa_buf);
534 Selarea.sa_buf = NULL;
535 }
536
537 if (str != NULL) {
538 Selarea.sa_buf = str;
539 Selarea.sa_buflen = ptr - str;
540 }
541 }
542
543 /* ---------------------------------------------------------------------- */
544
545 /* Starts a selection. */
546 static void
547 selarea_start(void)
548 {
549
550 if (Selarea.sa_buf != NULL) {
551 free(Selarea.sa_buf);
552 Selarea.sa_buf = NULL;
553 }
554
555 Selarea.sa_y1 = Selmouse.sm_y;
556 Selarea.sa_x1 = Selmouse.sm_x;
557 selarea_calculate();
558 Selmouse.sm_selecting = 1;
559 }
560
561 /* ---------------------------------------------------------------------- */
562
563 /* Ends a selection. Highlighted text is copied to the buffer. */
564 static void
565 selarea_end(void)
566 {
567 size_t i;
568
569 selarea_calculate();
570
571 /* Invert sel coordinates if needed */
572 if (Selarea.sa_x1 > Selarea.sa_x2) {
573 i = Selarea.sa_x2;
574 Selarea.sa_x2 = Selarea.sa_x1;
575 Selarea.sa_x1 = i;
576 }
577 if (Selarea.sa_y1 > Selarea.sa_y2) {
578 i = Selarea.sa_y2;
579 Selarea.sa_y2 = Selarea.sa_y1;
580 Selarea.sa_y1 = i;
581 }
582
583 selarea_copy_text();
584 Selmouse.sm_selecting = 0;
585 }
586
587 /* ---------------------------------------------------------------------- */
588
589 /* Calculates selection absolute positions in the screen buffer. */
590 static void
591 selarea_calculate(void)
592 {
593 size_t i;
594
595 i = Selmouse.sm_max_x + 1;
596 Selarea.sa_y2 = Selmouse.sm_y;
597 Selarea.sa_x2 = Selmouse.sm_x;
598 Selarea.sa_startoff = Selarea.sa_y1 * i + Selarea.sa_x1;
599 Selarea.sa_endoff = Selarea.sa_y2 * i + Selarea.sa_x2;
600
601 if (Selarea.sa_startoff > Selarea.sa_endoff) {
602 i = Selarea.sa_endoff;
603 Selarea.sa_endoff = Selarea.sa_startoff;
604 Selarea.sa_startoff = i;
605 }
606 }
607
608 /* ---------------------------------------------------------------------- */
609
610 /* Hides the highlighted region, returning it to normal colors. */
611 static void
612 selarea_hide(void)
613 {
614 size_t i;
615
616 for (i = Selarea.sa_startoff; i <= Selarea.sa_endoff; i++)
617 char_invert(0, i);
618 }
619
620 /* ---------------------------------------------------------------------- */
621
622 /* Highlights the selected region. */
623 static void
624 selarea_show(void)
625 {
626 size_t i;
627
628 selarea_calculate();
629 for (i = Selarea.sa_startoff; i <= Selarea.sa_endoff; i++)
630 char_invert(0, i);
631 }
632
633 /* ---------------------------------------------------------------------- */
634
635 /* Pastes selected text into the active console. */
636 static void
637 selarea_paste(void)
638 {
639 size_t i;
640
641 if (Selarea.sa_buf == NULL)
642 return;
643 for (i = 0; i < Selarea.sa_buflen; i++)
644 if (ioctl(Selmouse.sm_ttyfd, TIOCSTI,
645 &Selarea.sa_buf[i]) == -1)
646 log_warn("ioctl(TIOCSTI)");
647 }
648