Makefile.in revision c813b494 
1# Makefile.in generated by automake 1.16.2 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2020 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17# 
18#  Copyright 2005  Red Hat, Inc.
19# 
20#  Permission to use, copy, modify, distribute, and sell this software and its
21#  documentation for any purpose is hereby granted without fee, provided that
22#  the above copyright notice appear in all copies and that both that
23#  copyright notice and this permission notice appear in supporting
24#  documentation, and that the name of Red Hat not be used in
25#  advertising or publicity pertaining to distribution of the software without
26#  specific, written prior permission.  Red Hat makes no
27#  representations about the suitability of this software for any purpose.  It
28#  is provided "as is" without express or implied warranty.
29# 
30#  RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
31#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
32#  EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
33#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
34#  DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
35#  TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
36#  PERFORMANCE OF THIS SOFTWARE.
37
38VPATH = @srcdir@
39am__is_gnu_make = { \
40  if test -z '$(MAKELEVEL)'; then \
41    false; \
42  elif test -n '$(MAKE_HOST)'; then \
43    true; \
44  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
45    true; \
46  else \
47    false; \
48  fi; \
49}
50am__make_running_with_option = \
51  case $${target_option-} in \
52      ?) ;; \
53      *) echo "am__make_running_with_option: internal error: invalid" \
54              "target option '$${target_option-}' specified" >&2; \
55         exit 1;; \
56  esac; \
57  has_opt=no; \
58  sane_makeflags=$$MAKEFLAGS; \
59  if $(am__is_gnu_make); then \
60    sane_makeflags=$$MFLAGS; \
61  else \
62    case $$MAKEFLAGS in \
63      *\\[\ \	]*) \
64        bs=\\; \
65        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
66          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
67    esac; \
68  fi; \
69  skip_next=no; \
70  strip_trailopt () \
71  { \
72    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
73  }; \
74  for flg in $$sane_makeflags; do \
75    test $$skip_next = yes && { skip_next=no; continue; }; \
76    case $$flg in \
77      *=*|--*) continue;; \
78        -*I) strip_trailopt 'I'; skip_next=yes;; \
79      -*I?*) strip_trailopt 'I';; \
80        -*O) strip_trailopt 'O'; skip_next=yes;; \
81      -*O?*) strip_trailopt 'O';; \
82        -*l) strip_trailopt 'l'; skip_next=yes;; \
83      -*l?*) strip_trailopt 'l';; \
84      -[dEDm]) skip_next=yes;; \
85      -[JT]) skip_next=yes;; \
86    esac; \
87    case $$flg in \
88      *$$target_option*) has_opt=yes; break;; \
89    esac; \
90  done; \
91  test $$has_opt = yes
92am__make_dryrun = (target_option=n; $(am__make_running_with_option))
93am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
94pkgdatadir = $(datadir)/@PACKAGE@
95pkgincludedir = $(includedir)/@PACKAGE@
96pkglibdir = $(libdir)/@PACKAGE@
97pkglibexecdir = $(libexecdir)/@PACKAGE@
98am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
99install_sh_DATA = $(install_sh) -c -m 644
100install_sh_PROGRAM = $(install_sh) -c
101install_sh_SCRIPT = $(install_sh) -c
102INSTALL_HEADER = $(INSTALL_DATA)
103transform = $(program_transform_name)
104NORMAL_INSTALL = :
105PRE_INSTALL = :
106POST_INSTALL = :
107NORMAL_UNINSTALL = :
108PRE_UNINSTALL = :
109POST_UNINSTALL = :
110build_triplet = @build@
111host_triplet = @host@
112bin_PROGRAMS = fonttosfnt$(EXEEXT)
113@NEED_SETENV_TRUE@am__append_1 = env.c
114@NEED_SETENV_TRUE@am__append_2 = -DNEED_SETENV
115subdir = .
116ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
117am__aclocal_m4_deps = $(top_srcdir)/configure.ac
118am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
119	$(ACLOCAL_M4)
120DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
121	$(am__configure_deps) $(am__DIST_COMMON)
122am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
123 configure.lineno config.status.lineno
124mkinstalldirs = $(install_sh) -d
125CONFIG_HEADER = config.h
126CONFIG_CLEAN_FILES =
127CONFIG_CLEAN_VPATH_FILES =
128am__installdirs = "$(DESTDIR)$(bindir)"
129PROGRAMS = $(bin_PROGRAMS)
130am__fonttosfnt_SOURCES_DIST = fonttosfnt.c fonttosfnt.h read.c \
131	struct.c util.c write.c env.c
132@NEED_SETENV_TRUE@am__objects_1 = env.$(OBJEXT)
133am_fonttosfnt_OBJECTS = fonttosfnt.$(OBJEXT) read.$(OBJEXT) \
134	struct.$(OBJEXT) util.$(OBJEXT) write.$(OBJEXT) \
135	$(am__objects_1)
136fonttosfnt_OBJECTS = $(am_fonttosfnt_OBJECTS)
137am__DEPENDENCIES_1 =
138fonttosfnt_DEPENDENCIES = $(am__DEPENDENCIES_1)
139AM_V_P = $(am__v_P_@AM_V@)
140am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
141am__v_P_0 = false
142am__v_P_1 = :
143AM_V_GEN = $(am__v_GEN_@AM_V@)
144am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
145am__v_GEN_0 = @echo "  GEN     " $@;
146am__v_GEN_1 = 
147AM_V_at = $(am__v_at_@AM_V@)
148am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
149am__v_at_0 = @
150am__v_at_1 = 
151DEFAULT_INCLUDES = -I.@am__isrc@
152depcomp = $(SHELL) $(top_srcdir)/depcomp
153am__maybe_remake_depfiles = depfiles
154am__depfiles_remade = ./$(DEPDIR)/env.Po ./$(DEPDIR)/fonttosfnt.Po \
155	./$(DEPDIR)/read.Po ./$(DEPDIR)/struct.Po ./$(DEPDIR)/util.Po \
156	./$(DEPDIR)/write.Po
157am__mv = mv -f
158COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
159	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
160AM_V_CC = $(am__v_CC_@AM_V@)
161am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
162am__v_CC_0 = @echo "  CC      " $@;
163am__v_CC_1 = 
164CCLD = $(CC)
165LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
166AM_V_CCLD = $(am__v_CCLD_@AM_V@)
167am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
168am__v_CCLD_0 = @echo "  CCLD    " $@;
169am__v_CCLD_1 = 
170SOURCES = $(fonttosfnt_SOURCES)
171DIST_SOURCES = $(am__fonttosfnt_SOURCES_DIST)
172RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
173	ctags-recursive dvi-recursive html-recursive info-recursive \
174	install-data-recursive install-dvi-recursive \
175	install-exec-recursive install-html-recursive \
176	install-info-recursive install-pdf-recursive \
177	install-ps-recursive install-recursive installcheck-recursive \
178	installdirs-recursive pdf-recursive ps-recursive \
179	tags-recursive uninstall-recursive
180am__can_run_installinfo = \
181  case $$AM_UPDATE_INFO_DIR in \
182    n|no|NO) false;; \
183    *) (install-info --version) >/dev/null 2>&1;; \
184  esac
185RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
186  distclean-recursive maintainer-clean-recursive
187am__recursive_targets = \
188  $(RECURSIVE_TARGETS) \
189  $(RECURSIVE_CLEAN_TARGETS) \
190  $(am__extra_recursive_targets)
191AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
192	cscope distdir distdir-am dist dist-all distcheck
193am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
194	config.h.in
195# Read a list of newline-separated strings from the standard input,
196# and print each of them once, without duplicates.  Input order is
197# *not* preserved.
198am__uniquify_input = $(AWK) '\
199  BEGIN { nonempty = 0; } \
200  { items[$$0] = 1; nonempty = 1; } \
201  END { if (nonempty) { for (i in items) print i; }; } \
202'
203# Make sure the list of sources is unique.  This is necessary because,
204# e.g., the same source file might be shared among _SOURCES variables
205# for different programs/libraries.
206am__define_uniq_tagged_files = \
207  list='$(am__tagged_files)'; \
208  unique=`for i in $$list; do \
209    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
210  done | $(am__uniquify_input)`
211ETAGS = etags
212CTAGS = ctags
213CSCOPE = cscope
214DIST_SUBDIRS = $(SUBDIRS)
215am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in COPYING \
216	ChangeLog INSTALL compile config.guess config.sub depcomp \
217	install-sh missing
218DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
219distdir = $(PACKAGE)-$(VERSION)
220top_distdir = $(distdir)
221am__remove_distdir = \
222  if test -d "$(distdir)"; then \
223    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
224      && rm -rf "$(distdir)" \
225      || { sleep 5 && rm -rf "$(distdir)"; }; \
226  else :; fi
227am__post_remove_distdir = $(am__remove_distdir)
228am__relativize = \
229  dir0=`pwd`; \
230  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
231  sed_rest='s,^[^/]*/*,,'; \
232  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
233  sed_butlast='s,/*[^/]*$$,,'; \
234  while test -n "$$dir1"; do \
235    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
236    if test "$$first" != "."; then \
237      if test "$$first" = ".."; then \
238        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
239        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
240      else \
241        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
242        if test "$$first2" = "$$first"; then \
243          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
244        else \
245          dir2="../$$dir2"; \
246        fi; \
247        dir0="$$dir0"/"$$first"; \
248      fi; \
249    fi; \
250    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
251  done; \
252  reldir="$$dir2"
253DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
254GZIP_ENV = --best
255DIST_TARGETS = dist-bzip2 dist-gzip
256distuninstallcheck_listfiles = find . -type f -print
257am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
258  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
259distcleancheck_listfiles = find . -type f -print
260ACLOCAL = @ACLOCAL@
261ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
262ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
263AMTAR = @AMTAR@
264AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
265APP_MAN_DIR = @APP_MAN_DIR@
266APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
267AUTOCONF = @AUTOCONF@
268AUTOHEADER = @AUTOHEADER@
269AUTOMAKE = @AUTOMAKE@
270AWK = @AWK@
271BASE_CFLAGS = @BASE_CFLAGS@
272CC = @CC@
273CCDEPMODE = @CCDEPMODE@
274CFLAGS = @CFLAGS@
275CHANGELOG_CMD = @CHANGELOG_CMD@
276CPP = @CPP@
277CPPFLAGS = @CPPFLAGS@
278CWARNFLAGS = @CWARNFLAGS@
279CYGPATH_W = @CYGPATH_W@
280DEFS = @DEFS@
281DEPDIR = @DEPDIR@
282DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
283DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
284ECHO_C = @ECHO_C@
285ECHO_N = @ECHO_N@
286ECHO_T = @ECHO_T@
287EGREP = @EGREP@
288EXEEXT = @EXEEXT@
289FILE_MAN_DIR = @FILE_MAN_DIR@
290FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
291FONTTOSFNT_CFLAGS = @FONTTOSFNT_CFLAGS@
292FONTTOSFNT_LIBS = @FONTTOSFNT_LIBS@
293GREP = @GREP@
294INSTALL = @INSTALL@
295INSTALL_CMD = @INSTALL_CMD@
296INSTALL_DATA = @INSTALL_DATA@
297INSTALL_PROGRAM = @INSTALL_PROGRAM@
298INSTALL_SCRIPT = @INSTALL_SCRIPT@
299INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
300LDFLAGS = @LDFLAGS@
301LIBOBJS = @LIBOBJS@
302LIBS = @LIBS@
303LIB_MAN_DIR = @LIB_MAN_DIR@
304LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
305LTLIBOBJS = @LTLIBOBJS@
306MAKEINFO = @MAKEINFO@
307MAN_SUBSTS = @MAN_SUBSTS@
308MISC_MAN_DIR = @MISC_MAN_DIR@
309MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
310MKDIR_P = @MKDIR_P@
311OBJEXT = @OBJEXT@
312PACKAGE = @PACKAGE@
313PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
314PACKAGE_NAME = @PACKAGE_NAME@
315PACKAGE_STRING = @PACKAGE_STRING@
316PACKAGE_TARNAME = @PACKAGE_TARNAME@
317PACKAGE_URL = @PACKAGE_URL@
318PACKAGE_VERSION = @PACKAGE_VERSION@
319PATH_SEPARATOR = @PATH_SEPARATOR@
320PKG_CONFIG = @PKG_CONFIG@
321PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
322PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
323SED = @SED@
324SET_MAKE = @SET_MAKE@
325SHELL = @SHELL@
326STRICT_CFLAGS = @STRICT_CFLAGS@
327STRIP = @STRIP@
328VERSION = @VERSION@
329XORG_MAN_PAGE = @XORG_MAN_PAGE@
330abs_builddir = @abs_builddir@
331abs_srcdir = @abs_srcdir@
332abs_top_builddir = @abs_top_builddir@
333abs_top_srcdir = @abs_top_srcdir@
334ac_ct_CC = @ac_ct_CC@
335am__include = @am__include@
336am__leading_dot = @am__leading_dot@
337am__quote = @am__quote@
338am__tar = @am__tar@
339am__untar = @am__untar@
340bindir = @bindir@
341build = @build@
342build_alias = @build_alias@
343build_cpu = @build_cpu@
344build_os = @build_os@
345build_vendor = @build_vendor@
346builddir = @builddir@
347datadir = @datadir@
348datarootdir = @datarootdir@
349docdir = @docdir@
350dvidir = @dvidir@
351exec_prefix = @exec_prefix@
352host = @host@
353host_alias = @host_alias@
354host_cpu = @host_cpu@
355host_os = @host_os@
356host_vendor = @host_vendor@
357htmldir = @htmldir@
358includedir = @includedir@
359infodir = @infodir@
360install_sh = @install_sh@
361libdir = @libdir@
362libexecdir = @libexecdir@
363localedir = @localedir@
364localstatedir = @localstatedir@
365mandir = @mandir@
366mkdir_p = @mkdir_p@
367oldincludedir = @oldincludedir@
368pdfdir = @pdfdir@
369prefix = @prefix@
370program_transform_name = @program_transform_name@
371psdir = @psdir@
372sbindir = @sbindir@
373sharedstatedir = @sharedstatedir@
374srcdir = @srcdir@
375sysconfdir = @sysconfdir@
376target_alias = @target_alias@
377top_build_prefix = @top_build_prefix@
378top_builddir = @top_builddir@
379top_srcdir = @top_srcdir@
380SUBDIRS = man
381AM_CFLAGS = -DXVENDORNAME=\"X.Org\ Foundation\" $(FONTTOSFNT_CFLAGS) \
382	-DXVENDORNAMESHORT=\"X.Org\" -D_DEFAULT_SOURCE -D_GNU_SOURCE \
383	$(CWARNFLAGS) $(am__append_2)
384fonttosfnt_LDADD = $(FONTTOSFNT_LIBS) -lm
385fonttosfnt_SOURCES = fonttosfnt.c fonttosfnt.h read.c struct.c util.c \
386	write.c $(am__append_1)
387MAINTAINERCLEANFILES = ChangeLog INSTALL
388EXTRA_DIST = README.md
389all: config.h
390	$(MAKE) $(AM_MAKEFLAGS) all-recursive
391
392.SUFFIXES:
393.SUFFIXES: .c .o .obj
394am--refresh: Makefile
395	@:
396$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
397	@for dep in $?; do \
398	  case '$(am__configure_deps)' in \
399	    *$$dep*) \
400	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
401	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
402		&& exit 0; \
403	      exit 1;; \
404	  esac; \
405	done; \
406	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
407	$(am__cd) $(top_srcdir) && \
408	  $(AUTOMAKE) --foreign Makefile
409Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
410	@case '$?' in \
411	  *config.status*) \
412	    echo ' $(SHELL) ./config.status'; \
413	    $(SHELL) ./config.status;; \
414	  *) \
415	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
416	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
417	esac;
418
419$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
420	$(SHELL) ./config.status --recheck
421
422$(top_srcdir)/configure:  $(am__configure_deps)
423	$(am__cd) $(srcdir) && $(AUTOCONF)
424$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
425	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
426$(am__aclocal_m4_deps):
427
428config.h: stamp-h1
429	@test -f $@ || rm -f stamp-h1
430	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
431
432stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
433	@rm -f stamp-h1
434	cd $(top_builddir) && $(SHELL) ./config.status config.h
435$(srcdir)/config.h.in:  $(am__configure_deps) 
436	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
437	rm -f stamp-h1
438	touch $@
439
440distclean-hdr:
441	-rm -f config.h stamp-h1
442install-binPROGRAMS: $(bin_PROGRAMS)
443	@$(NORMAL_INSTALL)
444	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
445	if test -n "$$list"; then \
446	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
447	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
448	fi; \
449	for p in $$list; do echo "$$p $$p"; done | \
450	sed 's/$(EXEEXT)$$//' | \
451	while read p p1; do if test -f $$p \
452	  ; then echo "$$p"; echo "$$p"; else :; fi; \
453	done | \
454	sed -e 'p;s,.*/,,;n;h' \
455	    -e 's|.*|.|' \
456	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
457	sed 'N;N;N;s,\n, ,g' | \
458	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
459	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
460	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
461	    else { print "f", $$3 "/" $$4, $$1; } } \
462	  END { for (d in files) print "f", d, files[d] }' | \
463	while read type dir files; do \
464	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
465	    test -z "$$files" || { \
466	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
467	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
468	    } \
469	; done
470
471uninstall-binPROGRAMS:
472	@$(NORMAL_UNINSTALL)
473	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
474	files=`for p in $$list; do echo "$$p"; done | \
475	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
476	      -e 's/$$/$(EXEEXT)/' \
477	`; \
478	test -n "$$list" || exit 0; \
479	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
480	cd "$(DESTDIR)$(bindir)" && rm -f $$files
481
482clean-binPROGRAMS:
483	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
484
485fonttosfnt$(EXEEXT): $(fonttosfnt_OBJECTS) $(fonttosfnt_DEPENDENCIES) $(EXTRA_fonttosfnt_DEPENDENCIES) 
486	@rm -f fonttosfnt$(EXEEXT)
487	$(AM_V_CCLD)$(LINK) $(fonttosfnt_OBJECTS) $(fonttosfnt_LDADD) $(LIBS)
488
489mostlyclean-compile:
490	-rm -f *.$(OBJEXT)
491
492distclean-compile:
493	-rm -f *.tab.c
494
495@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/env.Po@am__quote@ # am--include-marker
496@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fonttosfnt.Po@am__quote@ # am--include-marker
497@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/read.Po@am__quote@ # am--include-marker
498@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/struct.Po@am__quote@ # am--include-marker
499@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/util.Po@am__quote@ # am--include-marker
500@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/write.Po@am__quote@ # am--include-marker
501
502$(am__depfiles_remade):
503	@$(MKDIR_P) $(@D)
504	@echo '# dummy' >$@-t && $(am__mv) $@-t $@
505
506am--depfiles: $(am__depfiles_remade)
507
508.c.o:
509@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
510@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
511@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
512@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
513@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
514
515.c.obj:
516@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
517@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
518@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
519@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
520@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
521
522# This directory's subdirectories are mostly independent; you can cd
523# into them and run 'make' without going through this Makefile.
524# To change the values of 'make' variables: instead of editing Makefiles,
525# (1) if the variable is set in 'config.status', edit 'config.status'
526#     (which will cause the Makefiles to be regenerated when you run 'make');
527# (2) otherwise, pass the desired values on the 'make' command line.
528$(am__recursive_targets):
529	@fail=; \
530	if $(am__make_keepgoing); then \
531	  failcom='fail=yes'; \
532	else \
533	  failcom='exit 1'; \
534	fi; \
535	dot_seen=no; \
536	target=`echo $@ | sed s/-recursive//`; \
537	case "$@" in \
538	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
539	  *) list='$(SUBDIRS)' ;; \
540	esac; \
541	for subdir in $$list; do \
542	  echo "Making $$target in $$subdir"; \
543	  if test "$$subdir" = "."; then \
544	    dot_seen=yes; \
545	    local_target="$$target-am"; \
546	  else \
547	    local_target="$$target"; \
548	  fi; \
549	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
550	  || eval $$failcom; \
551	done; \
552	if test "$$dot_seen" = "no"; then \
553	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
554	fi; test -z "$$fail"
555
556ID: $(am__tagged_files)
557	$(am__define_uniq_tagged_files); mkid -fID $$unique
558tags: tags-recursive
559TAGS: tags
560
561tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
562	set x; \
563	here=`pwd`; \
564	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
565	  include_option=--etags-include; \
566	  empty_fix=.; \
567	else \
568	  include_option=--include; \
569	  empty_fix=; \
570	fi; \
571	list='$(SUBDIRS)'; for subdir in $$list; do \
572	  if test "$$subdir" = .; then :; else \
573	    test ! -f $$subdir/TAGS || \
574	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
575	  fi; \
576	done; \
577	$(am__define_uniq_tagged_files); \
578	shift; \
579	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
580	  test -n "$$unique" || unique=$$empty_fix; \
581	  if test $$# -gt 0; then \
582	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
583	      "$$@" $$unique; \
584	  else \
585	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
586	      $$unique; \
587	  fi; \
588	fi
589ctags: ctags-recursive
590
591CTAGS: ctags
592ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
593	$(am__define_uniq_tagged_files); \
594	test -z "$(CTAGS_ARGS)$$unique" \
595	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
596	     $$unique
597
598GTAGS:
599	here=`$(am__cd) $(top_builddir) && pwd` \
600	  && $(am__cd) $(top_srcdir) \
601	  && gtags -i $(GTAGS_ARGS) "$$here"
602cscope: cscope.files
603	test ! -s cscope.files \
604	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
605clean-cscope:
606	-rm -f cscope.files
607cscope.files: clean-cscope cscopelist
608cscopelist: cscopelist-recursive
609
610cscopelist-am: $(am__tagged_files)
611	list='$(am__tagged_files)'; \
612	case "$(srcdir)" in \
613	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
614	  *) sdir=$(subdir)/$(srcdir) ;; \
615	esac; \
616	for i in $$list; do \
617	  if test -f "$$i"; then \
618	    echo "$(subdir)/$$i"; \
619	  else \
620	    echo "$$sdir/$$i"; \
621	  fi; \
622	done >> $(top_builddir)/cscope.files
623
624distclean-tags:
625	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
626	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
627
628distdir: $(BUILT_SOURCES)
629	$(MAKE) $(AM_MAKEFLAGS) distdir-am
630
631distdir-am: $(DISTFILES)
632	$(am__remove_distdir)
633	test -d "$(distdir)" || mkdir "$(distdir)"
634	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
635	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
636	list='$(DISTFILES)'; \
637	  dist_files=`for file in $$list; do echo $$file; done | \
638	  sed -e "s|^$$srcdirstrip/||;t" \
639	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
640	case $$dist_files in \
641	  */*) $(MKDIR_P) `echo "$$dist_files" | \
642			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
643			   sort -u` ;; \
644	esac; \
645	for file in $$dist_files; do \
646	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
647	  if test -d $$d/$$file; then \
648	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
649	    if test -d "$(distdir)/$$file"; then \
650	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
651	    fi; \
652	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
653	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
654	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
655	    fi; \
656	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
657	  else \
658	    test -f "$(distdir)/$$file" \
659	    || cp -p $$d/$$file "$(distdir)/$$file" \
660	    || exit 1; \
661	  fi; \
662	done
663	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
664	  if test "$$subdir" = .; then :; else \
665	    $(am__make_dryrun) \
666	      || test -d "$(distdir)/$$subdir" \
667	      || $(MKDIR_P) "$(distdir)/$$subdir" \
668	      || exit 1; \
669	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
670	    $(am__relativize); \
671	    new_distdir=$$reldir; \
672	    dir1=$$subdir; dir2="$(top_distdir)"; \
673	    $(am__relativize); \
674	    new_top_distdir=$$reldir; \
675	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
676	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
677	    ($(am__cd) $$subdir && \
678	      $(MAKE) $(AM_MAKEFLAGS) \
679	        top_distdir="$$new_top_distdir" \
680	        distdir="$$new_distdir" \
681		am__remove_distdir=: \
682		am__skip_length_check=: \
683		am__skip_mode_fix=: \
684	        distdir) \
685	      || exit 1; \
686	  fi; \
687	done
688	$(MAKE) $(AM_MAKEFLAGS) \
689	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
690	  dist-hook
691	-test -n "$(am__skip_mode_fix)" \
692	|| find "$(distdir)" -type d ! -perm -755 \
693		-exec chmod u+rwx,go+rx {} \; -o \
694	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
695	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
696	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
697	|| chmod -R a+r "$(distdir)"
698dist-gzip: distdir
699	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
700	$(am__post_remove_distdir)
701dist-bzip2: distdir
702	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
703	$(am__post_remove_distdir)
704
705dist-lzip: distdir
706	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
707	$(am__post_remove_distdir)
708
709dist-xz: distdir
710	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
711	$(am__post_remove_distdir)
712
713dist-zstd: distdir
714	tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
715	$(am__post_remove_distdir)
716
717dist-tarZ: distdir
718	@echo WARNING: "Support for distribution archives compressed with" \
719		       "legacy program 'compress' is deprecated." >&2
720	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
721	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
722	$(am__post_remove_distdir)
723
724dist-shar: distdir
725	@echo WARNING: "Support for shar distribution archives is" \
726	               "deprecated." >&2
727	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
728	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
729	$(am__post_remove_distdir)
730
731dist-zip: distdir
732	-rm -f $(distdir).zip
733	zip -rq $(distdir).zip $(distdir)
734	$(am__post_remove_distdir)
735
736dist dist-all:
737	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
738	$(am__post_remove_distdir)
739
740# This target untars the dist file and tries a VPATH configuration.  Then
741# it guarantees that the distribution is self-contained by making another
742# tarfile.
743distcheck: dist
744	case '$(DIST_ARCHIVES)' in \
745	*.tar.gz*) \
746	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
747	*.tar.bz2*) \
748	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
749	*.tar.lz*) \
750	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
751	*.tar.xz*) \
752	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
753	*.tar.Z*) \
754	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
755	*.shar.gz*) \
756	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
757	*.zip*) \
758	  unzip $(distdir).zip ;;\
759	*.tar.zst*) \
760	  zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
761	esac
762	chmod -R a-w $(distdir)
763	chmod u+w $(distdir)
764	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
765	chmod a-w $(distdir)
766	test -d $(distdir)/_build || exit 0; \
767	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
768	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
769	  && am__cwd=`pwd` \
770	  && $(am__cd) $(distdir)/_build/sub \
771	  && ../../configure \
772	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
773	    $(DISTCHECK_CONFIGURE_FLAGS) \
774	    --srcdir=../.. --prefix="$$dc_install_base" \
775	  && $(MAKE) $(AM_MAKEFLAGS) \
776	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
777	  && $(MAKE) $(AM_MAKEFLAGS) check \
778	  && $(MAKE) $(AM_MAKEFLAGS) install \
779	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
780	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
781	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
782	        distuninstallcheck \
783	  && chmod -R a-w "$$dc_install_base" \
784	  && ({ \
785	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
786	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
787	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
788	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
789	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
790	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
791	  && rm -rf "$$dc_destdir" \
792	  && $(MAKE) $(AM_MAKEFLAGS) dist \
793	  && rm -rf $(DIST_ARCHIVES) \
794	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
795	  && cd "$$am__cwd" \
796	  || exit 1
797	$(am__post_remove_distdir)
798	@(echo "$(distdir) archives ready for distribution: "; \
799	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
800	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
801distuninstallcheck:
802	@test -n '$(distuninstallcheck_dir)' || { \
803	  echo 'ERROR: trying to run $@ with an empty' \
804	       '$$(distuninstallcheck_dir)' >&2; \
805	  exit 1; \
806	}; \
807	$(am__cd) '$(distuninstallcheck_dir)' || { \
808	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
809	  exit 1; \
810	}; \
811	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
812	   || { echo "ERROR: files left after uninstall:" ; \
813	        if test -n "$(DESTDIR)"; then \
814	          echo "  (check DESTDIR support)"; \
815	        fi ; \
816	        $(distuninstallcheck_listfiles) ; \
817	        exit 1; } >&2
818distcleancheck: distclean
819	@if test '$(srcdir)' = . ; then \
820	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
821	  exit 1 ; \
822	fi
823	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
824	  || { echo "ERROR: files left in build directory after distclean:" ; \
825	       $(distcleancheck_listfiles) ; \
826	       exit 1; } >&2
827check-am: all-am
828check: check-recursive
829all-am: Makefile $(PROGRAMS) config.h
830installdirs: installdirs-recursive
831installdirs-am:
832	for dir in "$(DESTDIR)$(bindir)"; do \
833	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
834	done
835install: install-recursive
836install-exec: install-exec-recursive
837install-data: install-data-recursive
838uninstall: uninstall-recursive
839
840install-am: all-am
841	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
842
843installcheck: installcheck-recursive
844install-strip:
845	if test -z '$(STRIP)'; then \
846	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
847	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
848	      install; \
849	else \
850	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
851	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
852	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
853	fi
854mostlyclean-generic:
855
856clean-generic:
857
858distclean-generic:
859	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
860	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
861
862maintainer-clean-generic:
863	@echo "This command is intended for maintainers to use"
864	@echo "it deletes files that may require special tools to rebuild."
865	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
866clean: clean-recursive
867
868clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
869
870distclean: distclean-recursive
871	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
872		-rm -f ./$(DEPDIR)/env.Po
873	-rm -f ./$(DEPDIR)/fonttosfnt.Po
874	-rm -f ./$(DEPDIR)/read.Po
875	-rm -f ./$(DEPDIR)/struct.Po
876	-rm -f ./$(DEPDIR)/util.Po
877	-rm -f ./$(DEPDIR)/write.Po
878	-rm -f Makefile
879distclean-am: clean-am distclean-compile distclean-generic \
880	distclean-hdr distclean-tags
881
882dvi: dvi-recursive
883
884dvi-am:
885
886html: html-recursive
887
888html-am:
889
890info: info-recursive
891
892info-am:
893
894install-data-am:
895
896install-dvi: install-dvi-recursive
897
898install-dvi-am:
899
900install-exec-am: install-binPROGRAMS
901
902install-html: install-html-recursive
903
904install-html-am:
905
906install-info: install-info-recursive
907
908install-info-am:
909
910install-man:
911
912install-pdf: install-pdf-recursive
913
914install-pdf-am:
915
916install-ps: install-ps-recursive
917
918install-ps-am:
919
920installcheck-am:
921
922maintainer-clean: maintainer-clean-recursive
923	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
924	-rm -rf $(top_srcdir)/autom4te.cache
925		-rm -f ./$(DEPDIR)/env.Po
926	-rm -f ./$(DEPDIR)/fonttosfnt.Po
927	-rm -f ./$(DEPDIR)/read.Po
928	-rm -f ./$(DEPDIR)/struct.Po
929	-rm -f ./$(DEPDIR)/util.Po
930	-rm -f ./$(DEPDIR)/write.Po
931	-rm -f Makefile
932maintainer-clean-am: distclean-am maintainer-clean-generic
933
934mostlyclean: mostlyclean-recursive
935
936mostlyclean-am: mostlyclean-compile mostlyclean-generic
937
938pdf: pdf-recursive
939
940pdf-am:
941
942ps: ps-recursive
943
944ps-am:
945
946uninstall-am: uninstall-binPROGRAMS
947
948.MAKE: $(am__recursive_targets) all install-am install-strip
949
950.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
951	am--depfiles am--refresh check check-am clean \
952	clean-binPROGRAMS clean-cscope clean-generic cscope \
953	cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
954	dist-gzip dist-hook dist-lzip dist-shar dist-tarZ dist-xz \
955	dist-zip dist-zstd distcheck distclean distclean-compile \
956	distclean-generic distclean-hdr distclean-tags distcleancheck \
957	distdir distuninstallcheck dvi dvi-am html html-am info \
958	info-am install install-am install-binPROGRAMS install-data \
959	install-data-am install-dvi install-dvi-am install-exec \
960	install-exec-am install-html install-html-am install-info \
961	install-info-am install-man install-pdf install-pdf-am \
962	install-ps install-ps-am install-strip installcheck \
963	installcheck-am installdirs installdirs-am maintainer-clean \
964	maintainer-clean-generic mostlyclean mostlyclean-compile \
965	mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
966	uninstall-am uninstall-binPROGRAMS
967
968.PRECIOUS: Makefile
969
970
971.PHONY: ChangeLog INSTALL
972
973INSTALL:
974	$(INSTALL_CMD)
975
976ChangeLog:
977	$(CHANGELOG_CMD)
978
979dist-hook: ChangeLog INSTALL
980
981# Tell versions [3.59,3.63) of GNU make to not export all variables.
982# Otherwise a system limit (for SysV at least) may be exceeded.
983.NOEXPORT:
984