Makefile.in revision 90b6713c 
1# Makefile.in generated by automake 1.11.1 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
6# Inc.
7# This Makefile.in is free software; the Free Software Foundation
8# gives unlimited permission to copy and/or distribute it,
9# with or without modifications, as long as this notice is preserved.
10
11# This program is distributed in the hope that it will be useful,
12# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14# PARTICULAR PURPOSE.
15
16@SET_MAKE@
17
18# 
19#  Copyright 2005  Red Hat, Inc.
20# 
21#  Permission to use, copy, modify, distribute, and sell this software and its
22#  documentation for any purpose is hereby granted without fee, provided that
23#  the above copyright notice appear in all copies and that both that
24#  copyright notice and this permission notice appear in supporting
25#  documentation, and that the name of Red Hat not be used in
26#  advertising or publicity pertaining to distribution of the software without
27#  specific, written prior permission.  Red Hat makes no
28#  representations about the suitability of this software for any purpose.  It
29#  is provided "as is" without express or implied warranty.
30# 
31#  RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
32#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
33#  EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
34#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
35#  DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
36#  TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
37#  PERFORMANCE OF THIS SOFTWARE.
38
39VPATH = @srcdir@
40pkgdatadir = $(datadir)/@PACKAGE@
41pkgincludedir = $(includedir)/@PACKAGE@
42pkglibdir = $(libdir)/@PACKAGE@
43pkglibexecdir = $(libexecdir)/@PACKAGE@
44am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
45install_sh_DATA = $(install_sh) -c -m 644
46install_sh_PROGRAM = $(install_sh) -c
47install_sh_SCRIPT = $(install_sh) -c
48INSTALL_HEADER = $(INSTALL_DATA)
49transform = $(program_transform_name)
50NORMAL_INSTALL = :
51PRE_INSTALL = :
52POST_INSTALL = :
53NORMAL_UNINSTALL = :
54PRE_UNINSTALL = :
55POST_UNINSTALL = :
56build_triplet = @build@
57host_triplet = @host@
58bin_PROGRAMS = iceauth$(EXEEXT)
59subdir = .
60DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
61	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
62	$(top_srcdir)/configure COPYING ChangeLog INSTALL config.guess \
63	config.sub depcomp install-sh missing
64ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
65am__aclocal_m4_deps = $(top_srcdir)/configure.ac
66am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
67	$(ACLOCAL_M4)
68am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
69 configure.lineno config.status.lineno
70mkinstalldirs = $(install_sh) -d
71CONFIG_HEADER = config.h
72CONFIG_CLEAN_FILES =
73CONFIG_CLEAN_VPATH_FILES =
74am__installdirs = "$(DESTDIR)$(bindir)"
75PROGRAMS = $(bin_PROGRAMS)
76am_iceauth_OBJECTS = iceauth.$(OBJEXT) process.$(OBJEXT)
77iceauth_OBJECTS = $(am_iceauth_OBJECTS)
78am__DEPENDENCIES_1 =
79iceauth_DEPENDENCIES = $(am__DEPENDENCIES_1)
80DEFAULT_INCLUDES = -I.@am__isrc@
81depcomp = $(SHELL) $(top_srcdir)/depcomp
82am__depfiles_maybe = depfiles
83am__mv = mv -f
84COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
85	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
86AM_V_CC = $(am__v_CC_$(V))
87am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))
88am__v_CC_0 = @echo "  CC    " $@;
89AM_V_at = $(am__v_at_$(V))
90am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
91am__v_at_0 = @
92CCLD = $(CC)
93LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
94AM_V_CCLD = $(am__v_CCLD_$(V))
95am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))
96am__v_CCLD_0 = @echo "  CCLD  " $@;
97AM_V_GEN = $(am__v_GEN_$(V))
98am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
99am__v_GEN_0 = @echo "  GEN   " $@;
100SOURCES = $(iceauth_SOURCES)
101DIST_SOURCES = $(iceauth_SOURCES)
102RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
103	html-recursive info-recursive install-data-recursive \
104	install-dvi-recursive install-exec-recursive \
105	install-html-recursive install-info-recursive \
106	install-pdf-recursive install-ps-recursive install-recursive \
107	installcheck-recursive installdirs-recursive pdf-recursive \
108	ps-recursive uninstall-recursive
109RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
110  distclean-recursive maintainer-clean-recursive
111AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
112	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
113	distdir dist dist-all distcheck
114ETAGS = etags
115CTAGS = ctags
116DIST_SUBDIRS = $(SUBDIRS)
117DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
118distdir = $(PACKAGE)-$(VERSION)
119top_distdir = $(distdir)
120am__remove_distdir = \
121  { test ! -d "$(distdir)" \
122    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
123         && rm -fr "$(distdir)"; }; }
124am__relativize = \
125  dir0=`pwd`; \
126  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
127  sed_rest='s,^[^/]*/*,,'; \
128  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
129  sed_butlast='s,/*[^/]*$$,,'; \
130  while test -n "$$dir1"; do \
131    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
132    if test "$$first" != "."; then \
133      if test "$$first" = ".."; then \
134        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
135        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
136      else \
137        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
138        if test "$$first2" = "$$first"; then \
139          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
140        else \
141          dir2="../$$dir2"; \
142        fi; \
143        dir0="$$dir0"/"$$first"; \
144      fi; \
145    fi; \
146    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
147  done; \
148  reldir="$$dir2"
149DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
150GZIP_ENV = --best
151distuninstallcheck_listfiles = find . -type f -print
152distcleancheck_listfiles = find . -type f -print
153ACLOCAL = @ACLOCAL@
154ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
155ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
156AMTAR = @AMTAR@
157AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
158APP_MAN_DIR = @APP_MAN_DIR@
159APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
160AUTOCONF = @AUTOCONF@
161AUTOHEADER = @AUTOHEADER@
162AUTOMAKE = @AUTOMAKE@
163AWK = @AWK@
164CC = @CC@
165CCDEPMODE = @CCDEPMODE@
166CFLAGS = @CFLAGS@
167CHANGELOG_CMD = @CHANGELOG_CMD@
168CPP = @CPP@
169CPPFLAGS = @CPPFLAGS@
170CWARNFLAGS = @CWARNFLAGS@
171CYGPATH_W = @CYGPATH_W@
172DEFS = @DEFS@
173DEPDIR = @DEPDIR@
174DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
175DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
176ECHO_C = @ECHO_C@
177ECHO_N = @ECHO_N@
178ECHO_T = @ECHO_T@
179EGREP = @EGREP@
180EXEEXT = @EXEEXT@
181FILE_MAN_DIR = @FILE_MAN_DIR@
182FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
183GREP = @GREP@
184ICEAUTH_CFLAGS = @ICEAUTH_CFLAGS@
185ICEAUTH_LIBS = @ICEAUTH_LIBS@
186INSTALL = @INSTALL@
187INSTALL_CMD = @INSTALL_CMD@
188INSTALL_DATA = @INSTALL_DATA@
189INSTALL_PROGRAM = @INSTALL_PROGRAM@
190INSTALL_SCRIPT = @INSTALL_SCRIPT@
191INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
192LDFLAGS = @LDFLAGS@
193LIBOBJS = @LIBOBJS@
194LIBS = @LIBS@
195LIB_MAN_DIR = @LIB_MAN_DIR@
196LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
197LINT = @LINT@
198LINT_FLAGS = @LINT_FLAGS@
199LTLIBOBJS = @LTLIBOBJS@
200MAINT = @MAINT@
201MAKEINFO = @MAKEINFO@
202MAN_SUBSTS = @MAN_SUBSTS@
203MISC_MAN_DIR = @MISC_MAN_DIR@
204MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
205MKDIR_P = @MKDIR_P@
206OBJEXT = @OBJEXT@
207PACKAGE = @PACKAGE@
208PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
209PACKAGE_NAME = @PACKAGE_NAME@
210PACKAGE_STRING = @PACKAGE_STRING@
211PACKAGE_TARNAME = @PACKAGE_TARNAME@
212PACKAGE_URL = @PACKAGE_URL@
213PACKAGE_VERSION = @PACKAGE_VERSION@
214PATH_SEPARATOR = @PATH_SEPARATOR@
215PKG_CONFIG = @PKG_CONFIG@
216PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
217PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
218SED = @SED@
219SET_MAKE = @SET_MAKE@
220SHELL = @SHELL@
221STRIP = @STRIP@
222VERSION = @VERSION@
223XORG_MAN_PAGE = @XORG_MAN_PAGE@
224abs_builddir = @abs_builddir@
225abs_srcdir = @abs_srcdir@
226abs_top_builddir = @abs_top_builddir@
227abs_top_srcdir = @abs_top_srcdir@
228ac_ct_CC = @ac_ct_CC@
229am__include = @am__include@
230am__leading_dot = @am__leading_dot@
231am__quote = @am__quote@
232am__tar = @am__tar@
233am__untar = @am__untar@
234bindir = @bindir@
235build = @build@
236build_alias = @build_alias@
237build_cpu = @build_cpu@
238build_os = @build_os@
239build_vendor = @build_vendor@
240builddir = @builddir@
241datadir = @datadir@
242datarootdir = @datarootdir@
243docdir = @docdir@
244dvidir = @dvidir@
245exec_prefix = @exec_prefix@
246host = @host@
247host_alias = @host_alias@
248host_cpu = @host_cpu@
249host_os = @host_os@
250host_vendor = @host_vendor@
251htmldir = @htmldir@
252includedir = @includedir@
253infodir = @infodir@
254install_sh = @install_sh@
255libdir = @libdir@
256libexecdir = @libexecdir@
257localedir = @localedir@
258localstatedir = @localstatedir@
259mandir = @mandir@
260mkdir_p = @mkdir_p@
261oldincludedir = @oldincludedir@
262pdfdir = @pdfdir@
263prefix = @prefix@
264program_transform_name = @program_transform_name@
265psdir = @psdir@
266sbindir = @sbindir@
267sharedstatedir = @sharedstatedir@
268srcdir = @srcdir@
269sysconfdir = @sysconfdir@
270target_alias = @target_alias@
271top_build_prefix = @top_build_prefix@
272top_builddir = @top_builddir@
273top_srcdir = @top_srcdir@
274SUBDIRS = man
275AM_CFLAGS = $(CWARNFLAGS) $(ICEAUTH_CFLAGS)
276iceauth_LDADD = $(ICEAUTH_LIBS)
277iceauth_SOURCES = \
278        iceauth.c \
279        iceauth.h \
280        process.c
281
282MAINTAINERCLEANFILES = ChangeLog INSTALL
283@LINT_TRUE@ALL_LINT_FLAGS = $(LINT_FLAGS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
284@LINT_TRUE@                $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS)
285
286all: config.h
287	$(MAKE) $(AM_MAKEFLAGS) all-recursive
288
289.SUFFIXES:
290.SUFFIXES: .c .o .obj
291am--refresh:
292	@:
293$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
294	@for dep in $?; do \
295	  case '$(am__configure_deps)' in \
296	    *$$dep*) \
297	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
298	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
299		&& exit 0; \
300	      exit 1;; \
301	  esac; \
302	done; \
303	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
304	$(am__cd) $(top_srcdir) && \
305	  $(AUTOMAKE) --foreign Makefile
306.PRECIOUS: Makefile
307Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
308	@case '$?' in \
309	  *config.status*) \
310	    echo ' $(SHELL) ./config.status'; \
311	    $(SHELL) ./config.status;; \
312	  *) \
313	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
314	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
315	esac;
316
317$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
318	$(SHELL) ./config.status --recheck
319
320$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
321	$(am__cd) $(srcdir) && $(AUTOCONF)
322$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
323	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
324$(am__aclocal_m4_deps):
325
326config.h: stamp-h1
327	@if test ! -f $@; then \
328	  rm -f stamp-h1; \
329	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
330	else :; fi
331
332stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
333	@rm -f stamp-h1
334	cd $(top_builddir) && $(SHELL) ./config.status config.h
335$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
336	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
337	rm -f stamp-h1
338	touch $@
339
340distclean-hdr:
341	-rm -f config.h stamp-h1
342install-binPROGRAMS: $(bin_PROGRAMS)
343	@$(NORMAL_INSTALL)
344	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
345	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
346	for p in $$list; do echo "$$p $$p"; done | \
347	sed 's/$(EXEEXT)$$//' | \
348	while read p p1; do if test -f $$p; \
349	  then echo "$$p"; echo "$$p"; else :; fi; \
350	done | \
351	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
352	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
353	sed 'N;N;N;s,\n, ,g' | \
354	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
355	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
356	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
357	    else { print "f", $$3 "/" $$4, $$1; } } \
358	  END { for (d in files) print "f", d, files[d] }' | \
359	while read type dir files; do \
360	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
361	    test -z "$$files" || { \
362	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
363	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
364	    } \
365	; done
366
367uninstall-binPROGRAMS:
368	@$(NORMAL_UNINSTALL)
369	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
370	files=`for p in $$list; do echo "$$p"; done | \
371	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
372	      -e 's/$$/$(EXEEXT)/' `; \
373	test -n "$$list" || exit 0; \
374	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
375	cd "$(DESTDIR)$(bindir)" && rm -f $$files
376
377clean-binPROGRAMS:
378	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
379iceauth$(EXEEXT): $(iceauth_OBJECTS) $(iceauth_DEPENDENCIES) 
380	@rm -f iceauth$(EXEEXT)
381	$(AM_V_CCLD)$(LINK) $(iceauth_OBJECTS) $(iceauth_LDADD) $(LIBS)
382
383mostlyclean-compile:
384	-rm -f *.$(OBJEXT)
385
386distclean-compile:
387	-rm -f *.tab.c
388
389@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iceauth.Po@am__quote@
390@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/process.Po@am__quote@
391
392.c.o:
393@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
394@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
395@am__fastdepCC_FALSE@	$(AM_V_CC) @AM_BACKSLASH@
396@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
397@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
398@am__fastdepCC_FALSE@	$(COMPILE) -c $<
399
400.c.obj:
401@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
402@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
403@am__fastdepCC_FALSE@	$(AM_V_CC) @AM_BACKSLASH@
404@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
405@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
406@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
407
408# This directory's subdirectories are mostly independent; you can cd
409# into them and run `make' without going through this Makefile.
410# To change the values of `make' variables: instead of editing Makefiles,
411# (1) if the variable is set in `config.status', edit `config.status'
412#     (which will cause the Makefiles to be regenerated when you run `make');
413# (2) otherwise, pass the desired values on the `make' command line.
414$(RECURSIVE_TARGETS):
415	@fail= failcom='exit 1'; \
416	for f in x $$MAKEFLAGS; do \
417	  case $$f in \
418	    *=* | --[!k]*);; \
419	    *k*) failcom='fail=yes';; \
420	  esac; \
421	done; \
422	dot_seen=no; \
423	target=`echo $@ | sed s/-recursive//`; \
424	list='$(SUBDIRS)'; for subdir in $$list; do \
425	  echo "Making $$target in $$subdir"; \
426	  if test "$$subdir" = "."; then \
427	    dot_seen=yes; \
428	    local_target="$$target-am"; \
429	  else \
430	    local_target="$$target"; \
431	  fi; \
432	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
433	  || eval $$failcom; \
434	done; \
435	if test "$$dot_seen" = "no"; then \
436	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
437	fi; test -z "$$fail"
438
439$(RECURSIVE_CLEAN_TARGETS):
440	@fail= failcom='exit 1'; \
441	for f in x $$MAKEFLAGS; do \
442	  case $$f in \
443	    *=* | --[!k]*);; \
444	    *k*) failcom='fail=yes';; \
445	  esac; \
446	done; \
447	dot_seen=no; \
448	case "$@" in \
449	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
450	  *) list='$(SUBDIRS)' ;; \
451	esac; \
452	rev=''; for subdir in $$list; do \
453	  if test "$$subdir" = "."; then :; else \
454	    rev="$$subdir $$rev"; \
455	  fi; \
456	done; \
457	rev="$$rev ."; \
458	target=`echo $@ | sed s/-recursive//`; \
459	for subdir in $$rev; do \
460	  echo "Making $$target in $$subdir"; \
461	  if test "$$subdir" = "."; then \
462	    local_target="$$target-am"; \
463	  else \
464	    local_target="$$target"; \
465	  fi; \
466	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
467	  || eval $$failcom; \
468	done && test -z "$$fail"
469tags-recursive:
470	list='$(SUBDIRS)'; for subdir in $$list; do \
471	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
472	done
473ctags-recursive:
474	list='$(SUBDIRS)'; for subdir in $$list; do \
475	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
476	done
477
478ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
479	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
480	unique=`for i in $$list; do \
481	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
482	  done | \
483	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
484	      END { if (nonempty) { for (i in files) print i; }; }'`; \
485	mkid -fID $$unique
486tags: TAGS
487
488TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
489		$(TAGS_FILES) $(LISP)
490	set x; \
491	here=`pwd`; \
492	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
493	  include_option=--etags-include; \
494	  empty_fix=.; \
495	else \
496	  include_option=--include; \
497	  empty_fix=; \
498	fi; \
499	list='$(SUBDIRS)'; for subdir in $$list; do \
500	  if test "$$subdir" = .; then :; else \
501	    test ! -f $$subdir/TAGS || \
502	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
503	  fi; \
504	done; \
505	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
506	unique=`for i in $$list; do \
507	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
508	  done | \
509	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
510	      END { if (nonempty) { for (i in files) print i; }; }'`; \
511	shift; \
512	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
513	  test -n "$$unique" || unique=$$empty_fix; \
514	  if test $$# -gt 0; then \
515	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
516	      "$$@" $$unique; \
517	  else \
518	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
519	      $$unique; \
520	  fi; \
521	fi
522ctags: CTAGS
523CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
524		$(TAGS_FILES) $(LISP)
525	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
526	unique=`for i in $$list; do \
527	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
528	  done | \
529	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
530	      END { if (nonempty) { for (i in files) print i; }; }'`; \
531	test -z "$(CTAGS_ARGS)$$unique" \
532	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
533	     $$unique
534
535GTAGS:
536	here=`$(am__cd) $(top_builddir) && pwd` \
537	  && $(am__cd) $(top_srcdir) \
538	  && gtags -i $(GTAGS_ARGS) "$$here"
539
540distclean-tags:
541	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
542
543distdir: $(DISTFILES)
544	$(am__remove_distdir)
545	test -d "$(distdir)" || mkdir "$(distdir)"
546	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
547	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
548	list='$(DISTFILES)'; \
549	  dist_files=`for file in $$list; do echo $$file; done | \
550	  sed -e "s|^$$srcdirstrip/||;t" \
551	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
552	case $$dist_files in \
553	  */*) $(MKDIR_P) `echo "$$dist_files" | \
554			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
555			   sort -u` ;; \
556	esac; \
557	for file in $$dist_files; do \
558	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
559	  if test -d $$d/$$file; then \
560	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
561	    if test -d "$(distdir)/$$file"; then \
562	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
563	    fi; \
564	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
565	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
566	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
567	    fi; \
568	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
569	  else \
570	    test -f "$(distdir)/$$file" \
571	    || cp -p $$d/$$file "$(distdir)/$$file" \
572	    || exit 1; \
573	  fi; \
574	done
575	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
576	  if test "$$subdir" = .; then :; else \
577	    test -d "$(distdir)/$$subdir" \
578	    || $(MKDIR_P) "$(distdir)/$$subdir" \
579	    || exit 1; \
580	  fi; \
581	done
582	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
583	  if test "$$subdir" = .; then :; else \
584	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
585	    $(am__relativize); \
586	    new_distdir=$$reldir; \
587	    dir1=$$subdir; dir2="$(top_distdir)"; \
588	    $(am__relativize); \
589	    new_top_distdir=$$reldir; \
590	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
591	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
592	    ($(am__cd) $$subdir && \
593	      $(MAKE) $(AM_MAKEFLAGS) \
594	        top_distdir="$$new_top_distdir" \
595	        distdir="$$new_distdir" \
596		am__remove_distdir=: \
597		am__skip_length_check=: \
598		am__skip_mode_fix=: \
599	        distdir) \
600	      || exit 1; \
601	  fi; \
602	done
603	$(MAKE) $(AM_MAKEFLAGS) \
604	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
605	  dist-hook
606	-test -n "$(am__skip_mode_fix)" \
607	|| find "$(distdir)" -type d ! -perm -755 \
608		-exec chmod u+rwx,go+rx {} \; -o \
609	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
610	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
611	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
612	|| chmod -R a+r "$(distdir)"
613dist-gzip: distdir
614	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
615	$(am__remove_distdir)
616dist-bzip2: distdir
617	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
618	$(am__remove_distdir)
619
620dist-lzma: distdir
621	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
622	$(am__remove_distdir)
623
624dist-xz: distdir
625	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
626	$(am__remove_distdir)
627
628dist-tarZ: distdir
629	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
630	$(am__remove_distdir)
631
632dist-shar: distdir
633	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
634	$(am__remove_distdir)
635
636dist-zip: distdir
637	-rm -f $(distdir).zip
638	zip -rq $(distdir).zip $(distdir)
639	$(am__remove_distdir)
640
641dist dist-all: distdir
642	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
643	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
644	$(am__remove_distdir)
645
646# This target untars the dist file and tries a VPATH configuration.  Then
647# it guarantees that the distribution is self-contained by making another
648# tarfile.
649distcheck: dist
650	case '$(DIST_ARCHIVES)' in \
651	*.tar.gz*) \
652	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
653	*.tar.bz2*) \
654	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
655	*.tar.lzma*) \
656	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
657	*.tar.xz*) \
658	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
659	*.tar.Z*) \
660	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
661	*.shar.gz*) \
662	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
663	*.zip*) \
664	  unzip $(distdir).zip ;;\
665	esac
666	chmod -R a-w $(distdir); chmod a+w $(distdir)
667	mkdir $(distdir)/_build
668	mkdir $(distdir)/_inst
669	chmod a-w $(distdir)
670	test -d $(distdir)/_build || exit 0; \
671	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
672	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
673	  && am__cwd=`pwd` \
674	  && $(am__cd) $(distdir)/_build \
675	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
676	    $(DISTCHECK_CONFIGURE_FLAGS) \
677	  && $(MAKE) $(AM_MAKEFLAGS) \
678	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
679	  && $(MAKE) $(AM_MAKEFLAGS) check \
680	  && $(MAKE) $(AM_MAKEFLAGS) install \
681	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
682	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
683	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
684	        distuninstallcheck \
685	  && chmod -R a-w "$$dc_install_base" \
686	  && ({ \
687	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
688	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
689	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
690	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
691	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
692	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
693	  && rm -rf "$$dc_destdir" \
694	  && $(MAKE) $(AM_MAKEFLAGS) dist \
695	  && rm -rf $(DIST_ARCHIVES) \
696	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
697	  && cd "$$am__cwd" \
698	  || exit 1
699	$(am__remove_distdir)
700	@(echo "$(distdir) archives ready for distribution: "; \
701	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
702	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
703distuninstallcheck:
704	@$(am__cd) '$(distuninstallcheck_dir)' \
705	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
706	   || { echo "ERROR: files left after uninstall:" ; \
707	        if test -n "$(DESTDIR)"; then \
708	          echo "  (check DESTDIR support)"; \
709	        fi ; \
710	        $(distuninstallcheck_listfiles) ; \
711	        exit 1; } >&2
712distcleancheck: distclean
713	@if test '$(srcdir)' = . ; then \
714	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
715	  exit 1 ; \
716	fi
717	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
718	  || { echo "ERROR: files left in build directory after distclean:" ; \
719	       $(distcleancheck_listfiles) ; \
720	       exit 1; } >&2
721check-am: all-am
722check: check-recursive
723all-am: Makefile $(PROGRAMS) config.h
724installdirs: installdirs-recursive
725installdirs-am:
726	for dir in "$(DESTDIR)$(bindir)"; do \
727	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
728	done
729install: install-recursive
730install-exec: install-exec-recursive
731install-data: install-data-recursive
732uninstall: uninstall-recursive
733
734install-am: all-am
735	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
736
737installcheck: installcheck-recursive
738install-strip:
739	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
740	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
741	  `test -z '$(STRIP)' || \
742	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
743mostlyclean-generic:
744
745clean-generic:
746
747distclean-generic:
748	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
749	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
750
751maintainer-clean-generic:
752	@echo "This command is intended for maintainers to use"
753	@echo "it deletes files that may require special tools to rebuild."
754	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
755clean: clean-recursive
756
757clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
758
759distclean: distclean-recursive
760	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
761	-rm -rf ./$(DEPDIR)
762	-rm -f Makefile
763distclean-am: clean-am distclean-compile distclean-generic \
764	distclean-hdr distclean-tags
765
766dvi: dvi-recursive
767
768dvi-am:
769
770html: html-recursive
771
772html-am:
773
774info: info-recursive
775
776info-am:
777
778install-data-am:
779
780install-dvi: install-dvi-recursive
781
782install-dvi-am:
783
784install-exec-am: install-binPROGRAMS
785
786install-html: install-html-recursive
787
788install-html-am:
789
790install-info: install-info-recursive
791
792install-info-am:
793
794install-man:
795
796install-pdf: install-pdf-recursive
797
798install-pdf-am:
799
800install-ps: install-ps-recursive
801
802install-ps-am:
803
804installcheck-am:
805
806maintainer-clean: maintainer-clean-recursive
807	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
808	-rm -rf $(top_srcdir)/autom4te.cache
809	-rm -rf ./$(DEPDIR)
810	-rm -f Makefile
811maintainer-clean-am: distclean-am maintainer-clean-generic
812
813mostlyclean: mostlyclean-recursive
814
815mostlyclean-am: mostlyclean-compile mostlyclean-generic
816
817pdf: pdf-recursive
818
819pdf-am:
820
821ps: ps-recursive
822
823ps-am:
824
825uninstall-am: uninstall-binPROGRAMS
826
827.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
828	ctags-recursive install-am install-strip tags-recursive
829
830.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
831	all all-am am--refresh check check-am clean clean-binPROGRAMS \
832	clean-generic ctags ctags-recursive dist dist-all dist-bzip2 \
833	dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-xz \
834	dist-zip distcheck distclean distclean-compile \
835	distclean-generic distclean-hdr distclean-tags distcleancheck \
836	distdir distuninstallcheck dvi dvi-am html html-am info \
837	info-am install install-am install-binPROGRAMS install-data \
838	install-data-am install-dvi install-dvi-am install-exec \
839	install-exec-am install-html install-html-am install-info \
840	install-info-am install-man install-pdf install-pdf-am \
841	install-ps install-ps-am install-strip installcheck \
842	installcheck-am installdirs installdirs-am maintainer-clean \
843	maintainer-clean-generic mostlyclean mostlyclean-compile \
844	mostlyclean-generic pdf pdf-am ps ps-am tags tags-recursive \
845	uninstall uninstall-am uninstall-binPROGRAMS
846
847
848.PHONY: ChangeLog INSTALL
849
850INSTALL:
851	$(INSTALL_CMD)
852
853ChangeLog:
854	$(CHANGELOG_CMD)
855
856dist-hook: ChangeLog INSTALL
857@LINT_TRUE@lint:
858@LINT_TRUE@	$(LINT) $(ALL_LINT_FLAGS) $(iceauth_SOURCES)
859
860# Tell versions [3.59,3.63) of GNU make to not export all variables.
861# Otherwise a system limit (for SysV at least) may be exceeded.
862.NOEXPORT:
863