Makefile.in revision 5b16253f 
1# Makefile.in generated by automake 1.16.5 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2021 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17VPATH = @srcdir@
18am__is_gnu_make = { \
19  if test -z '$(MAKELEVEL)'; then \
20    false; \
21  elif test -n '$(MAKE_HOST)'; then \
22    true; \
23  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
24    true; \
25  else \
26    false; \
27  fi; \
28}
29am__make_running_with_option = \
30  case $${target_option-} in \
31      ?) ;; \
32      *) echo "am__make_running_with_option: internal error: invalid" \
33              "target option '$${target_option-}' specified" >&2; \
34         exit 1;; \
35  esac; \
36  has_opt=no; \
37  sane_makeflags=$$MAKEFLAGS; \
38  if $(am__is_gnu_make); then \
39    sane_makeflags=$$MFLAGS; \
40  else \
41    case $$MAKEFLAGS in \
42      *\\[\ \	]*) \
43        bs=\\; \
44        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
45          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
46    esac; \
47  fi; \
48  skip_next=no; \
49  strip_trailopt () \
50  { \
51    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
52  }; \
53  for flg in $$sane_makeflags; do \
54    test $$skip_next = yes && { skip_next=no; continue; }; \
55    case $$flg in \
56      *=*|--*) continue;; \
57        -*I) strip_trailopt 'I'; skip_next=yes;; \
58      -*I?*) strip_trailopt 'I';; \
59        -*O) strip_trailopt 'O'; skip_next=yes;; \
60      -*O?*) strip_trailopt 'O';; \
61        -*l) strip_trailopt 'l'; skip_next=yes;; \
62      -*l?*) strip_trailopt 'l';; \
63      -[dEDm]) skip_next=yes;; \
64      -[JT]) skip_next=yes;; \
65    esac; \
66    case $$flg in \
67      *$$target_option*) has_opt=yes; break;; \
68    esac; \
69  done; \
70  test $$has_opt = yes
71am__make_dryrun = (target_option=n; $(am__make_running_with_option))
72am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
73pkgdatadir = $(datadir)/@PACKAGE@
74pkgincludedir = $(includedir)/@PACKAGE@
75pkglibdir = $(libdir)/@PACKAGE@
76pkglibexecdir = $(libexecdir)/@PACKAGE@
77am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
78install_sh_DATA = $(install_sh) -c -m 644
79install_sh_PROGRAM = $(install_sh) -c
80install_sh_SCRIPT = $(install_sh) -c
81INSTALL_HEADER = $(INSTALL_DATA)
82transform = $(program_transform_name)
83NORMAL_INSTALL = :
84PRE_INSTALL = :
85POST_INSTALL = :
86NORMAL_UNINSTALL = :
87PRE_UNINSTALL = :
88POST_UNINSTALL = :
89build_triplet = @build@
90host_triplet = @host@
91@BUILD_XAW6_TRUE@am__append_1 = xaw6.pc
92@BUILD_XAW7_TRUE@am__append_2 = xaw7.pc
93subdir = .
94ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
95am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
96	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
97	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
98	$(top_srcdir)/configure.ac
99am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
100	$(ACLOCAL_M4)
101DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
102	$(am__configure_deps) $(am__DIST_COMMON)
103am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
104 configure.lineno config.status.lineno
105mkinstalldirs = $(install_sh) -d
106CONFIG_HEADER = config.h
107CONFIG_CLEAN_FILES = xaw6.pc xaw7.pc
108CONFIG_CLEAN_VPATH_FILES =
109AM_V_P = $(am__v_P_@AM_V@)
110am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
111am__v_P_0 = false
112am__v_P_1 = :
113AM_V_GEN = $(am__v_GEN_@AM_V@)
114am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
115am__v_GEN_0 = @echo "  GEN     " $@;
116am__v_GEN_1 = 
117AM_V_at = $(am__v_at_@AM_V@)
118am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
119am__v_at_0 = @
120am__v_at_1 = 
121SOURCES =
122DIST_SOURCES =
123RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
124	ctags-recursive dvi-recursive html-recursive info-recursive \
125	install-data-recursive install-dvi-recursive \
126	install-exec-recursive install-html-recursive \
127	install-info-recursive install-pdf-recursive \
128	install-ps-recursive install-recursive installcheck-recursive \
129	installdirs-recursive pdf-recursive ps-recursive \
130	tags-recursive uninstall-recursive
131am__can_run_installinfo = \
132  case $$AM_UPDATE_INFO_DIR in \
133    n|no|NO) false;; \
134    *) (install-info --version) >/dev/null 2>&1;; \
135  esac
136am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
137am__vpath_adj = case $$p in \
138    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
139    *) f=$$p;; \
140  esac;
141am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
142am__install_max = 40
143am__nobase_strip_setup = \
144  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
145am__nobase_strip = \
146  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
147am__nobase_list = $(am__nobase_strip_setup); \
148  for p in $$list; do echo "$$p $$p"; done | \
149  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
150  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
151    if (++n[$$2] == $(am__install_max)) \
152      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
153    END { for (dir in files) print dir, files[dir] }'
154am__base_list = \
155  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
156  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
157am__uninstall_files_from_dir = { \
158  test -z "$$files" \
159    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
160    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
161         $(am__cd) "$$dir" && rm -f $$files; }; \
162  }
163am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
164DATA = $(pkgconfig_DATA)
165RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
166  distclean-recursive maintainer-clean-recursive
167am__recursive_targets = \
168  $(RECURSIVE_TARGETS) \
169  $(RECURSIVE_CLEAN_TARGETS) \
170  $(am__extra_recursive_targets)
171AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
172	cscope distdir distdir-am dist dist-all distcheck
173am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
174	config.h.in
175# Read a list of newline-separated strings from the standard input,
176# and print each of them once, without duplicates.  Input order is
177# *not* preserved.
178am__uniquify_input = $(AWK) '\
179  BEGIN { nonempty = 0; } \
180  { items[$$0] = 1; nonempty = 1; } \
181  END { if (nonempty) { for (i in items) print i; }; } \
182'
183# Make sure the list of sources is unique.  This is necessary because,
184# e.g., the same source file might be shared among _SOURCES variables
185# for different programs/libraries.
186am__define_uniq_tagged_files = \
187  list='$(am__tagged_files)'; \
188  unique=`for i in $$list; do \
189    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
190  done | $(am__uniquify_input)`
191DIST_SUBDIRS = $(SUBDIRS)
192am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
193	$(srcdir)/xaw6.pc.in $(srcdir)/xaw7.pc.in COPYING ChangeLog \
194	INSTALL README.md compile config.guess config.sub install-sh \
195	ltmain.sh missing
196DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
197distdir = $(PACKAGE)-$(VERSION)
198top_distdir = $(distdir)
199am__remove_distdir = \
200  if test -d "$(distdir)"; then \
201    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
202      && rm -rf "$(distdir)" \
203      || { sleep 5 && rm -rf "$(distdir)"; }; \
204  else :; fi
205am__post_remove_distdir = $(am__remove_distdir)
206am__relativize = \
207  dir0=`pwd`; \
208  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
209  sed_rest='s,^[^/]*/*,,'; \
210  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
211  sed_butlast='s,/*[^/]*$$,,'; \
212  while test -n "$$dir1"; do \
213    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
214    if test "$$first" != "."; then \
215      if test "$$first" = ".."; then \
216        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
217        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
218      else \
219        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
220        if test "$$first2" = "$$first"; then \
221          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
222        else \
223          dir2="../$$dir2"; \
224        fi; \
225        dir0="$$dir0"/"$$first"; \
226      fi; \
227    fi; \
228    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
229  done; \
230  reldir="$$dir2"
231DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.xz
232GZIP_ENV = --best
233DIST_TARGETS = dist-xz dist-gzip
234# Exists only to be overridden by the user if desired.
235AM_DISTCHECK_DVI_TARGET = dvi
236distuninstallcheck_listfiles = find . -type f -print
237am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
238  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
239distcleancheck_listfiles = find . -type f -print
240ACLOCAL = @ACLOCAL@
241ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
242ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
243AMTAR = @AMTAR@
244AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
245APP_MAN_DIR = @APP_MAN_DIR@
246APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
247AR = @AR@
248AUTOCONF = @AUTOCONF@
249AUTOHEADER = @AUTOHEADER@
250AUTOMAKE = @AUTOMAKE@
251AWK = @AWK@
252BASE_CFLAGS = @BASE_CFLAGS@
253CC = @CC@
254CCDEPMODE = @CCDEPMODE@
255CFLAGS = @CFLAGS@
256CHANGELOG_CMD = @CHANGELOG_CMD@
257CPPFLAGS = @CPPFLAGS@
258CSCOPE = @CSCOPE@
259CTAGS = @CTAGS@
260CWARNFLAGS = @CWARNFLAGS@
261CYGPATH_W = @CYGPATH_W@
262DEFS = @DEFS@
263DEPDIR = @DEPDIR@
264DLLTOOL = @DLLTOOL@
265DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
266DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
267DSYMUTIL = @DSYMUTIL@
268DUMPBIN = @DUMPBIN@
269ECHO_C = @ECHO_C@
270ECHO_N = @ECHO_N@
271ECHO_T = @ECHO_T@
272EGREP = @EGREP@
273ETAGS = @ETAGS@
274EXEEXT = @EXEEXT@
275FGREP = @FGREP@
276FILECMD = @FILECMD@
277FILE_MAN_DIR = @FILE_MAN_DIR@
278FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
279FOP = @FOP@
280GREP = @GREP@
281INSTALL = @INSTALL@
282INSTALL_CMD = @INSTALL_CMD@
283INSTALL_DATA = @INSTALL_DATA@
284INSTALL_PROGRAM = @INSTALL_PROGRAM@
285INSTALL_SCRIPT = @INSTALL_SCRIPT@
286INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
287LD = @LD@
288LDFLAGS = @LDFLAGS@
289LIBEXT = @LIBEXT@
290LIBOBJS = @LIBOBJS@
291LIBS = @LIBS@
292LIBTOOL = @LIBTOOL@
293LIB_MAN_DIR = @LIB_MAN_DIR@
294LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
295LIPO = @LIPO@
296LN_S = @LN_S@
297LTLIBOBJS = @LTLIBOBJS@
298LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
299MAKEINFO = @MAKEINFO@
300MANIFEST_TOOL = @MANIFEST_TOOL@
301MAN_SUBSTS = @MAN_SUBSTS@
302MISC_MAN_DIR = @MISC_MAN_DIR@
303MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
304MKDIR_P = @MKDIR_P@
305NM = @NM@
306NMEDIT = @NMEDIT@
307OBJDUMP = @OBJDUMP@
308OBJEXT = @OBJEXT@
309OTOOL = @OTOOL@
310OTOOL64 = @OTOOL64@
311PACKAGE = @PACKAGE@
312PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
313PACKAGE_NAME = @PACKAGE_NAME@
314PACKAGE_STRING = @PACKAGE_STRING@
315PACKAGE_TARNAME = @PACKAGE_TARNAME@
316PACKAGE_URL = @PACKAGE_URL@
317PACKAGE_VERSION = @PACKAGE_VERSION@
318PATH_SEPARATOR = @PATH_SEPARATOR@
319PKG_CONFIG = @PKG_CONFIG@
320PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
321PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
322RANLIB = @RANLIB@
323SED = @SED@
324SET_MAKE = @SET_MAKE@
325SHELL = @SHELL@
326STRICT_CFLAGS = @STRICT_CFLAGS@
327STRIP = @STRIP@
328STYLESHEET_SRCDIR = @STYLESHEET_SRCDIR@
329VERSION = @VERSION@
330XAW6_CFLAGS = @XAW6_CFLAGS@
331XAW6_LIBS = @XAW6_LIBS@
332XAW7_CFLAGS = @XAW7_CFLAGS@
333XAW7_LIBS = @XAW7_LIBS@
334XMLTO = @XMLTO@
335XORG_MAN_PAGE = @XORG_MAN_PAGE@
336XORG_SGML_PATH = @XORG_SGML_PATH@
337XSLTPROC = @XSLTPROC@
338XSL_STYLESHEET = @XSL_STYLESHEET@
339abs_builddir = @abs_builddir@
340abs_srcdir = @abs_srcdir@
341abs_top_builddir = @abs_top_builddir@
342abs_top_srcdir = @abs_top_srcdir@
343ac_ct_AR = @ac_ct_AR@
344ac_ct_CC = @ac_ct_CC@
345ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
346am__include = @am__include@
347am__leading_dot = @am__leading_dot@
348am__quote = @am__quote@
349am__tar = @am__tar@
350am__untar = @am__untar@
351bindir = @bindir@
352build = @build@
353build_alias = @build_alias@
354build_cpu = @build_cpu@
355build_os = @build_os@
356build_vendor = @build_vendor@
357builddir = @builddir@
358datadir = @datadir@
359datarootdir = @datarootdir@
360docdir = @docdir@
361dvidir = @dvidir@
362exec_prefix = @exec_prefix@
363host = @host@
364host_alias = @host_alias@
365host_cpu = @host_cpu@
366host_os = @host_os@
367host_vendor = @host_vendor@
368htmldir = @htmldir@
369includedir = @includedir@
370infodir = @infodir@
371install_sh = @install_sh@
372libdir = @libdir@
373libexecdir = @libexecdir@
374localedir = @localedir@
375localstatedir = @localstatedir@
376mandir = @mandir@
377mkdir_p = @mkdir_p@
378oldincludedir = @oldincludedir@
379pdfdir = @pdfdir@
380prefix = @prefix@
381program_transform_name = @program_transform_name@
382psdir = @psdir@
383runstatedir = @runstatedir@
384sbindir = @sbindir@
385sharedstatedir = @sharedstatedir@
386srcdir = @srcdir@
387sysconfdir = @sysconfdir@
388target_alias = @target_alias@
389top_build_prefix = @top_build_prefix@
390top_builddir = @top_builddir@
391top_srcdir = @top_srcdir@
392SUBDIRS = include src man specs
393pkgconfigdir = $(libdir)/pkgconfig
394pkgconfig_DATA = $(am__append_1) $(am__append_2)
395@BUILD_XAW6_TRUE@@PLATFORM_DARWIN_FALSE@DEFAULT_LIB = libXaw6.@LIBEXT@
396@BUILD_XAW6_TRUE@@PLATFORM_DARWIN_TRUE@DEFAULT_LIB = libXaw.6.@LIBEXT@
397@BUILD_XAW7_TRUE@@PLATFORM_DARWIN_FALSE@DEFAULT_LIB = libXaw7.@LIBEXT@
398@BUILD_XAW7_TRUE@@PLATFORM_DARWIN_TRUE@DEFAULT_LIB = libXaw.7.@LIBEXT@
399MAINTAINERCLEANFILES = ChangeLog INSTALL
400EXTRA_DIST = \
401	README.md	   \
402        autogen.sh	   \
403	old-doc/Changelog  \
404	old-doc/CHANGES
405
406all: config.h
407	$(MAKE) $(AM_MAKEFLAGS) all-recursive
408
409.SUFFIXES:
410am--refresh: Makefile
411	@:
412$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
413	@for dep in $?; do \
414	  case '$(am__configure_deps)' in \
415	    *$$dep*) \
416	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
417	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
418		&& exit 0; \
419	      exit 1;; \
420	  esac; \
421	done; \
422	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
423	$(am__cd) $(top_srcdir) && \
424	  $(AUTOMAKE) --foreign Makefile
425Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
426	@case '$?' in \
427	  *config.status*) \
428	    echo ' $(SHELL) ./config.status'; \
429	    $(SHELL) ./config.status;; \
430	  *) \
431	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
432	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
433	esac;
434
435$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
436	$(SHELL) ./config.status --recheck
437
438$(top_srcdir)/configure:  $(am__configure_deps)
439	$(am__cd) $(srcdir) && $(AUTOCONF)
440$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
441	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
442$(am__aclocal_m4_deps):
443
444config.h: stamp-h1
445	@test -f $@ || rm -f stamp-h1
446	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
447
448stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
449	@rm -f stamp-h1
450	cd $(top_builddir) && $(SHELL) ./config.status config.h
451$(srcdir)/config.h.in:  $(am__configure_deps) 
452	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
453	rm -f stamp-h1
454	touch $@
455
456distclean-hdr:
457	-rm -f config.h stamp-h1
458xaw6.pc: $(top_builddir)/config.status $(srcdir)/xaw6.pc.in
459	cd $(top_builddir) && $(SHELL) ./config.status $@
460xaw7.pc: $(top_builddir)/config.status $(srcdir)/xaw7.pc.in
461	cd $(top_builddir) && $(SHELL) ./config.status $@
462
463mostlyclean-libtool:
464	-rm -f *.lo
465
466clean-libtool:
467	-rm -rf .libs _libs
468
469distclean-libtool:
470	-rm -f libtool config.lt
471install-pkgconfigDATA: $(pkgconfig_DATA)
472	@$(NORMAL_INSTALL)
473	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
474	if test -n "$$list"; then \
475	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
476	  $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
477	fi; \
478	for p in $$list; do \
479	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
480	  echo "$$d$$p"; \
481	done | $(am__base_list) | \
482	while read files; do \
483	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
484	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
485	done
486
487uninstall-pkgconfigDATA:
488	@$(NORMAL_UNINSTALL)
489	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
490	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
491	dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
492
493# This directory's subdirectories are mostly independent; you can cd
494# into them and run 'make' without going through this Makefile.
495# To change the values of 'make' variables: instead of editing Makefiles,
496# (1) if the variable is set in 'config.status', edit 'config.status'
497#     (which will cause the Makefiles to be regenerated when you run 'make');
498# (2) otherwise, pass the desired values on the 'make' command line.
499$(am__recursive_targets):
500	@fail=; \
501	if $(am__make_keepgoing); then \
502	  failcom='fail=yes'; \
503	else \
504	  failcom='exit 1'; \
505	fi; \
506	dot_seen=no; \
507	target=`echo $@ | sed s/-recursive//`; \
508	case "$@" in \
509	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
510	  *) list='$(SUBDIRS)' ;; \
511	esac; \
512	for subdir in $$list; do \
513	  echo "Making $$target in $$subdir"; \
514	  if test "$$subdir" = "."; then \
515	    dot_seen=yes; \
516	    local_target="$$target-am"; \
517	  else \
518	    local_target="$$target"; \
519	  fi; \
520	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
521	  || eval $$failcom; \
522	done; \
523	if test "$$dot_seen" = "no"; then \
524	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
525	fi; test -z "$$fail"
526
527ID: $(am__tagged_files)
528	$(am__define_uniq_tagged_files); mkid -fID $$unique
529tags: tags-recursive
530TAGS: tags
531
532tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
533	set x; \
534	here=`pwd`; \
535	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
536	  include_option=--etags-include; \
537	  empty_fix=.; \
538	else \
539	  include_option=--include; \
540	  empty_fix=; \
541	fi; \
542	list='$(SUBDIRS)'; for subdir in $$list; do \
543	  if test "$$subdir" = .; then :; else \
544	    test ! -f $$subdir/TAGS || \
545	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
546	  fi; \
547	done; \
548	$(am__define_uniq_tagged_files); \
549	shift; \
550	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
551	  test -n "$$unique" || unique=$$empty_fix; \
552	  if test $$# -gt 0; then \
553	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
554	      "$$@" $$unique; \
555	  else \
556	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
557	      $$unique; \
558	  fi; \
559	fi
560ctags: ctags-recursive
561
562CTAGS: ctags
563ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
564	$(am__define_uniq_tagged_files); \
565	test -z "$(CTAGS_ARGS)$$unique" \
566	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
567	     $$unique
568
569GTAGS:
570	here=`$(am__cd) $(top_builddir) && pwd` \
571	  && $(am__cd) $(top_srcdir) \
572	  && gtags -i $(GTAGS_ARGS) "$$here"
573cscope: cscope.files
574	test ! -s cscope.files \
575	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
576clean-cscope:
577	-rm -f cscope.files
578cscope.files: clean-cscope cscopelist
579cscopelist: cscopelist-recursive
580
581cscopelist-am: $(am__tagged_files)
582	list='$(am__tagged_files)'; \
583	case "$(srcdir)" in \
584	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
585	  *) sdir=$(subdir)/$(srcdir) ;; \
586	esac; \
587	for i in $$list; do \
588	  if test -f "$$i"; then \
589	    echo "$(subdir)/$$i"; \
590	  else \
591	    echo "$$sdir/$$i"; \
592	  fi; \
593	done >> $(top_builddir)/cscope.files
594
595distclean-tags:
596	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
597	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
598distdir: $(BUILT_SOURCES)
599	$(MAKE) $(AM_MAKEFLAGS) distdir-am
600
601distdir-am: $(DISTFILES)
602	$(am__remove_distdir)
603	test -d "$(distdir)" || mkdir "$(distdir)"
604	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
605	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
606	list='$(DISTFILES)'; \
607	  dist_files=`for file in $$list; do echo $$file; done | \
608	  sed -e "s|^$$srcdirstrip/||;t" \
609	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
610	case $$dist_files in \
611	  */*) $(MKDIR_P) `echo "$$dist_files" | \
612			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
613			   sort -u` ;; \
614	esac; \
615	for file in $$dist_files; do \
616	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
617	  if test -d $$d/$$file; then \
618	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
619	    if test -d "$(distdir)/$$file"; then \
620	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
621	    fi; \
622	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
623	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
624	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
625	    fi; \
626	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
627	  else \
628	    test -f "$(distdir)/$$file" \
629	    || cp -p $$d/$$file "$(distdir)/$$file" \
630	    || exit 1; \
631	  fi; \
632	done
633	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
634	  if test "$$subdir" = .; then :; else \
635	    $(am__make_dryrun) \
636	      || test -d "$(distdir)/$$subdir" \
637	      || $(MKDIR_P) "$(distdir)/$$subdir" \
638	      || exit 1; \
639	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
640	    $(am__relativize); \
641	    new_distdir=$$reldir; \
642	    dir1=$$subdir; dir2="$(top_distdir)"; \
643	    $(am__relativize); \
644	    new_top_distdir=$$reldir; \
645	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
646	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
647	    ($(am__cd) $$subdir && \
648	      $(MAKE) $(AM_MAKEFLAGS) \
649	        top_distdir="$$new_top_distdir" \
650	        distdir="$$new_distdir" \
651		am__remove_distdir=: \
652		am__skip_length_check=: \
653		am__skip_mode_fix=: \
654	        distdir) \
655	      || exit 1; \
656	  fi; \
657	done
658	$(MAKE) $(AM_MAKEFLAGS) \
659	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
660	  dist-hook
661	-test -n "$(am__skip_mode_fix)" \
662	|| find "$(distdir)" -type d ! -perm -755 \
663		-exec chmod u+rwx,go+rx {} \; -o \
664	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
665	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
666	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
667	|| chmod -R a+r "$(distdir)"
668dist-gzip: distdir
669	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
670	$(am__post_remove_distdir)
671
672dist-bzip2: distdir
673	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
674	$(am__post_remove_distdir)
675
676dist-lzip: distdir
677	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
678	$(am__post_remove_distdir)
679dist-xz: distdir
680	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
681	$(am__post_remove_distdir)
682
683dist-zstd: distdir
684	tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
685	$(am__post_remove_distdir)
686
687dist-tarZ: distdir
688	@echo WARNING: "Support for distribution archives compressed with" \
689		       "legacy program 'compress' is deprecated." >&2
690	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
691	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
692	$(am__post_remove_distdir)
693
694dist-shar: distdir
695	@echo WARNING: "Support for shar distribution archives is" \
696	               "deprecated." >&2
697	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
698	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
699	$(am__post_remove_distdir)
700
701dist-zip: distdir
702	-rm -f $(distdir).zip
703	zip -rq $(distdir).zip $(distdir)
704	$(am__post_remove_distdir)
705
706dist dist-all:
707	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
708	$(am__post_remove_distdir)
709
710# This target untars the dist file and tries a VPATH configuration.  Then
711# it guarantees that the distribution is self-contained by making another
712# tarfile.
713distcheck: dist
714	case '$(DIST_ARCHIVES)' in \
715	*.tar.gz*) \
716	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
717	*.tar.bz2*) \
718	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
719	*.tar.lz*) \
720	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
721	*.tar.xz*) \
722	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
723	*.tar.Z*) \
724	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
725	*.shar.gz*) \
726	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
727	*.zip*) \
728	  unzip $(distdir).zip ;;\
729	*.tar.zst*) \
730	  zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
731	esac
732	chmod -R a-w $(distdir)
733	chmod u+w $(distdir)
734	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
735	chmod a-w $(distdir)
736	test -d $(distdir)/_build || exit 0; \
737	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
738	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
739	  && am__cwd=`pwd` \
740	  && $(am__cd) $(distdir)/_build/sub \
741	  && ../../configure \
742	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
743	    $(DISTCHECK_CONFIGURE_FLAGS) \
744	    --srcdir=../.. --prefix="$$dc_install_base" \
745	  && $(MAKE) $(AM_MAKEFLAGS) \
746	  && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
747	  && $(MAKE) $(AM_MAKEFLAGS) check \
748	  && $(MAKE) $(AM_MAKEFLAGS) install \
749	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
750	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
751	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
752	        distuninstallcheck \
753	  && chmod -R a-w "$$dc_install_base" \
754	  && ({ \
755	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
756	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
757	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
758	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
759	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
760	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
761	  && rm -rf "$$dc_destdir" \
762	  && $(MAKE) $(AM_MAKEFLAGS) dist \
763	  && rm -rf $(DIST_ARCHIVES) \
764	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
765	  && cd "$$am__cwd" \
766	  || exit 1
767	$(am__post_remove_distdir)
768	@(echo "$(distdir) archives ready for distribution: "; \
769	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
770	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
771distuninstallcheck:
772	@test -n '$(distuninstallcheck_dir)' || { \
773	  echo 'ERROR: trying to run $@ with an empty' \
774	       '$$(distuninstallcheck_dir)' >&2; \
775	  exit 1; \
776	}; \
777	$(am__cd) '$(distuninstallcheck_dir)' || { \
778	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
779	  exit 1; \
780	}; \
781	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
782	   || { echo "ERROR: files left after uninstall:" ; \
783	        if test -n "$(DESTDIR)"; then \
784	          echo "  (check DESTDIR support)"; \
785	        fi ; \
786	        $(distuninstallcheck_listfiles) ; \
787	        exit 1; } >&2
788distcleancheck: distclean
789	@if test '$(srcdir)' = . ; then \
790	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
791	  exit 1 ; \
792	fi
793	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
794	  || { echo "ERROR: files left in build directory after distclean:" ; \
795	       $(distcleancheck_listfiles) ; \
796	       exit 1; } >&2
797check-am: all-am
798check: check-recursive
799all-am: Makefile $(DATA) config.h
800installdirs: installdirs-recursive
801installdirs-am:
802	for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
803	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
804	done
805install: install-recursive
806install-exec: install-exec-recursive
807install-data: install-data-recursive
808uninstall: uninstall-recursive
809
810install-am: all-am
811	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
812
813installcheck: installcheck-recursive
814install-strip:
815	if test -z '$(STRIP)'; then \
816	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
817	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
818	      install; \
819	else \
820	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
821	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
822	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
823	fi
824mostlyclean-generic:
825
826clean-generic:
827
828distclean-generic:
829	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
830	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
831
832maintainer-clean-generic:
833	@echo "This command is intended for maintainers to use"
834	@echo "it deletes files that may require special tools to rebuild."
835	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
836clean: clean-recursive
837
838clean-am: clean-generic clean-libtool mostlyclean-am
839
840distclean: distclean-recursive
841	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
842	-rm -f Makefile
843distclean-am: clean-am distclean-generic distclean-hdr \
844	distclean-libtool distclean-tags
845
846dvi: dvi-recursive
847
848dvi-am:
849
850html: html-recursive
851
852html-am:
853
854info: info-recursive
855
856info-am:
857
858install-data-am: install-pkgconfigDATA
859
860install-dvi: install-dvi-recursive
861
862install-dvi-am:
863
864install-exec-am:
865	@$(NORMAL_INSTALL)
866	$(MAKE) $(AM_MAKEFLAGS) install-exec-hook
867install-html: install-html-recursive
868
869install-html-am:
870
871install-info: install-info-recursive
872
873install-info-am:
874
875install-man:
876
877install-pdf: install-pdf-recursive
878
879install-pdf-am:
880
881install-ps: install-ps-recursive
882
883install-ps-am:
884
885installcheck-am:
886
887maintainer-clean: maintainer-clean-recursive
888	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
889	-rm -rf $(top_srcdir)/autom4te.cache
890	-rm -f Makefile
891maintainer-clean-am: distclean-am maintainer-clean-generic
892
893mostlyclean: mostlyclean-recursive
894
895mostlyclean-am: mostlyclean-generic mostlyclean-libtool
896
897pdf: pdf-recursive
898
899pdf-am:
900
901ps: ps-recursive
902
903ps-am:
904
905uninstall-am: uninstall-local uninstall-pkgconfigDATA
906
907.MAKE: $(am__recursive_targets) all install-am install-exec-am \
908	install-strip
909
910.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
911	am--refresh check check-am clean clean-cscope clean-generic \
912	clean-libtool cscope cscopelist-am ctags ctags-am dist \
913	dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
914	dist-tarZ dist-xz dist-zip dist-zstd distcheck distclean \
915	distclean-generic distclean-hdr distclean-libtool \
916	distclean-tags distcleancheck distdir distuninstallcheck dvi \
917	dvi-am html html-am info info-am install install-am \
918	install-data install-data-am install-dvi install-dvi-am \
919	install-exec install-exec-am install-exec-hook install-html \
920	install-html-am install-info install-info-am install-man \
921	install-pdf install-pdf-am install-pkgconfigDATA install-ps \
922	install-ps-am install-strip installcheck installcheck-am \
923	installdirs installdirs-am maintainer-clean \
924	maintainer-clean-generic mostlyclean mostlyclean-generic \
925	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
926	uninstall-am uninstall-local uninstall-pkgconfigDATA
927
928.PRECIOUS: Makefile
929
930
931install-exec-hook:
932	cd $(DESTDIR)$(libdir) && rm -f libXaw.@LIBEXT@ && $(LN_S) $(DEFAULT_LIB) libXaw.@LIBEXT@
933
934uninstall-local:
935	-rm -f $(DESTDIR)$(libdir)/libXaw.@LIBEXT@
936
937.PHONY: ChangeLog INSTALL
938
939INSTALL:
940	$(INSTALL_CMD)
941
942ChangeLog:
943	$(CHANGELOG_CMD)
944
945dist-hook: ChangeLog INSTALL
946
947# Tell versions [3.59,3.63) of GNU make to not export all variables.
948# Otherwise a system limit (for SysV at least) may be exceeded.
949.NOEXPORT:
950