Makefile.in revision 5ec34c4c 
1# Makefile.in generated by automake 1.16.2 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2020 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17VPATH = @srcdir@
18am__is_gnu_make = { \
19  if test -z '$(MAKELEVEL)'; then \
20    false; \
21  elif test -n '$(MAKE_HOST)'; then \
22    true; \
23  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
24    true; \
25  else \
26    false; \
27  fi; \
28}
29am__make_running_with_option = \
30  case $${target_option-} in \
31      ?) ;; \
32      *) echo "am__make_running_with_option: internal error: invalid" \
33              "target option '$${target_option-}' specified" >&2; \
34         exit 1;; \
35  esac; \
36  has_opt=no; \
37  sane_makeflags=$$MAKEFLAGS; \
38  if $(am__is_gnu_make); then \
39    sane_makeflags=$$MFLAGS; \
40  else \
41    case $$MAKEFLAGS in \
42      *\\[\ \	]*) \
43        bs=\\; \
44        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
45          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
46    esac; \
47  fi; \
48  skip_next=no; \
49  strip_trailopt () \
50  { \
51    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
52  }; \
53  for flg in $$sane_makeflags; do \
54    test $$skip_next = yes && { skip_next=no; continue; }; \
55    case $$flg in \
56      *=*|--*) continue;; \
57        -*I) strip_trailopt 'I'; skip_next=yes;; \
58      -*I?*) strip_trailopt 'I';; \
59        -*O) strip_trailopt 'O'; skip_next=yes;; \
60      -*O?*) strip_trailopt 'O';; \
61        -*l) strip_trailopt 'l'; skip_next=yes;; \
62      -*l?*) strip_trailopt 'l';; \
63      -[dEDm]) skip_next=yes;; \
64      -[JT]) skip_next=yes;; \
65    esac; \
66    case $$flg in \
67      *$$target_option*) has_opt=yes; break;; \
68    esac; \
69  done; \
70  test $$has_opt = yes
71am__make_dryrun = (target_option=n; $(am__make_running_with_option))
72am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
73pkgdatadir = $(datadir)/@PACKAGE@
74pkgincludedir = $(includedir)/@PACKAGE@
75pkglibdir = $(libdir)/@PACKAGE@
76pkglibexecdir = $(libexecdir)/@PACKAGE@
77am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
78install_sh_DATA = $(install_sh) -c -m 644
79install_sh_PROGRAM = $(install_sh) -c
80install_sh_SCRIPT = $(install_sh) -c
81INSTALL_HEADER = $(INSTALL_DATA)
82transform = $(program_transform_name)
83NORMAL_INSTALL = :
84PRE_INSTALL = :
85POST_INSTALL = :
86NORMAL_UNINSTALL = :
87PRE_UNINSTALL = :
88POST_UNINSTALL = :
89build_triplet = @build@
90host_triplet = @host@
91@BUILD_XAW6_TRUE@am__append_1 = xaw6.pc
92@BUILD_XAW7_TRUE@am__append_2 = xaw7.pc
93subdir = .
94ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
95am__aclocal_m4_deps = $(top_srcdir)/configure.ac
96am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
97	$(ACLOCAL_M4)
98DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
99	$(am__configure_deps) $(am__DIST_COMMON)
100am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
101 configure.lineno config.status.lineno
102mkinstalldirs = $(install_sh) -d
103CONFIG_HEADER = config.h
104CONFIG_CLEAN_FILES = xaw6.pc xaw7.pc
105CONFIG_CLEAN_VPATH_FILES =
106AM_V_P = $(am__v_P_@AM_V@)
107am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
108am__v_P_0 = false
109am__v_P_1 = :
110AM_V_GEN = $(am__v_GEN_@AM_V@)
111am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
112am__v_GEN_0 = @echo "  GEN     " $@;
113am__v_GEN_1 = 
114AM_V_at = $(am__v_at_@AM_V@)
115am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
116am__v_at_0 = @
117am__v_at_1 = 
118SOURCES =
119DIST_SOURCES =
120RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
121	ctags-recursive dvi-recursive html-recursive info-recursive \
122	install-data-recursive install-dvi-recursive \
123	install-exec-recursive install-html-recursive \
124	install-info-recursive install-pdf-recursive \
125	install-ps-recursive install-recursive installcheck-recursive \
126	installdirs-recursive pdf-recursive ps-recursive \
127	tags-recursive uninstall-recursive
128am__can_run_installinfo = \
129  case $$AM_UPDATE_INFO_DIR in \
130    n|no|NO) false;; \
131    *) (install-info --version) >/dev/null 2>&1;; \
132  esac
133am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
134am__vpath_adj = case $$p in \
135    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
136    *) f=$$p;; \
137  esac;
138am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
139am__install_max = 40
140am__nobase_strip_setup = \
141  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
142am__nobase_strip = \
143  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
144am__nobase_list = $(am__nobase_strip_setup); \
145  for p in $$list; do echo "$$p $$p"; done | \
146  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
147  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
148    if (++n[$$2] == $(am__install_max)) \
149      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
150    END { for (dir in files) print dir, files[dir] }'
151am__base_list = \
152  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
153  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
154am__uninstall_files_from_dir = { \
155  test -z "$$files" \
156    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
157    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
158         $(am__cd) "$$dir" && rm -f $$files; }; \
159  }
160am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
161DATA = $(pkgconfig_DATA)
162RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
163  distclean-recursive maintainer-clean-recursive
164am__recursive_targets = \
165  $(RECURSIVE_TARGETS) \
166  $(RECURSIVE_CLEAN_TARGETS) \
167  $(am__extra_recursive_targets)
168AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
169	cscope distdir distdir-am dist dist-all distcheck
170am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
171	config.h.in
172# Read a list of newline-separated strings from the standard input,
173# and print each of them once, without duplicates.  Input order is
174# *not* preserved.
175am__uniquify_input = $(AWK) '\
176  BEGIN { nonempty = 0; } \
177  { items[$$0] = 1; nonempty = 1; } \
178  END { if (nonempty) { for (i in items) print i; }; } \
179'
180# Make sure the list of sources is unique.  This is necessary because,
181# e.g., the same source file might be shared among _SOURCES variables
182# for different programs/libraries.
183am__define_uniq_tagged_files = \
184  list='$(am__tagged_files)'; \
185  unique=`for i in $$list; do \
186    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
187  done | $(am__uniquify_input)`
188ETAGS = etags
189CTAGS = ctags
190CSCOPE = cscope
191DIST_SUBDIRS = $(SUBDIRS)
192am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
193	$(srcdir)/xaw6.pc.in $(srcdir)/xaw7.pc.in COPYING ChangeLog \
194	INSTALL compile config.guess config.sub install-sh ltmain.sh \
195	missing
196DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
197distdir = $(PACKAGE)-$(VERSION)
198top_distdir = $(distdir)
199am__remove_distdir = \
200  if test -d "$(distdir)"; then \
201    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
202      && rm -rf "$(distdir)" \
203      || { sleep 5 && rm -rf "$(distdir)"; }; \
204  else :; fi
205am__post_remove_distdir = $(am__remove_distdir)
206am__relativize = \
207  dir0=`pwd`; \
208  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
209  sed_rest='s,^[^/]*/*,,'; \
210  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
211  sed_butlast='s,/*[^/]*$$,,'; \
212  while test -n "$$dir1"; do \
213    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
214    if test "$$first" != "."; then \
215      if test "$$first" = ".."; then \
216        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
217        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
218      else \
219        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
220        if test "$$first2" = "$$first"; then \
221          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
222        else \
223          dir2="../$$dir2"; \
224        fi; \
225        dir0="$$dir0"/"$$first"; \
226      fi; \
227    fi; \
228    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
229  done; \
230  reldir="$$dir2"
231DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
232GZIP_ENV = --best
233DIST_TARGETS = dist-bzip2 dist-gzip
234distuninstallcheck_listfiles = find . -type f -print
235am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
236  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
237distcleancheck_listfiles = find . -type f -print
238ACLOCAL = @ACLOCAL@
239ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
240ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
241AMTAR = @AMTAR@
242AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
243APP_MAN_DIR = @APP_MAN_DIR@
244APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
245AR = @AR@
246AUTOCONF = @AUTOCONF@
247AUTOHEADER = @AUTOHEADER@
248AUTOMAKE = @AUTOMAKE@
249AWK = @AWK@
250BASE_CFLAGS = @BASE_CFLAGS@
251CC = @CC@
252CCDEPMODE = @CCDEPMODE@
253CFLAGS = @CFLAGS@
254CHANGELOG_CMD = @CHANGELOG_CMD@
255CPP = @CPP@
256CPPFLAGS = @CPPFLAGS@
257CWARNFLAGS = @CWARNFLAGS@
258CYGPATH_W = @CYGPATH_W@
259DEFS = @DEFS@
260DEPDIR = @DEPDIR@
261DLLTOOL = @DLLTOOL@
262DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
263DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
264DSYMUTIL = @DSYMUTIL@
265DUMPBIN = @DUMPBIN@
266ECHO_C = @ECHO_C@
267ECHO_N = @ECHO_N@
268ECHO_T = @ECHO_T@
269EGREP = @EGREP@
270EXEEXT = @EXEEXT@
271FGREP = @FGREP@
272FILE_MAN_DIR = @FILE_MAN_DIR@
273FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
274FOP = @FOP@
275GREP = @GREP@
276INSTALL = @INSTALL@
277INSTALL_CMD = @INSTALL_CMD@
278INSTALL_DATA = @INSTALL_DATA@
279INSTALL_PROGRAM = @INSTALL_PROGRAM@
280INSTALL_SCRIPT = @INSTALL_SCRIPT@
281INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
282LD = @LD@
283LDFLAGS = @LDFLAGS@
284LIBEXT = @LIBEXT@
285LIBOBJS = @LIBOBJS@
286LIBS = @LIBS@
287LIBTOOL = @LIBTOOL@
288LIB_MAN_DIR = @LIB_MAN_DIR@
289LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
290LIPO = @LIPO@
291LN_S = @LN_S@
292LTLIBOBJS = @LTLIBOBJS@
293LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
294MAKEINFO = @MAKEINFO@
295MANIFEST_TOOL = @MANIFEST_TOOL@
296MAN_SUBSTS = @MAN_SUBSTS@
297MISC_MAN_DIR = @MISC_MAN_DIR@
298MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
299MKDIR_P = @MKDIR_P@
300NM = @NM@
301NMEDIT = @NMEDIT@
302OBJDUMP = @OBJDUMP@
303OBJEXT = @OBJEXT@
304OTOOL = @OTOOL@
305OTOOL64 = @OTOOL64@
306PACKAGE = @PACKAGE@
307PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
308PACKAGE_NAME = @PACKAGE_NAME@
309PACKAGE_STRING = @PACKAGE_STRING@
310PACKAGE_TARNAME = @PACKAGE_TARNAME@
311PACKAGE_URL = @PACKAGE_URL@
312PACKAGE_VERSION = @PACKAGE_VERSION@
313PATH_SEPARATOR = @PATH_SEPARATOR@
314PKG_CONFIG = @PKG_CONFIG@
315PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
316PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
317RANLIB = @RANLIB@
318SED = @SED@
319SET_MAKE = @SET_MAKE@
320SHELL = @SHELL@
321STRICT_CFLAGS = @STRICT_CFLAGS@
322STRIP = @STRIP@
323STYLESHEET_SRCDIR = @STYLESHEET_SRCDIR@
324VERSION = @VERSION@
325XAW6_CFLAGS = @XAW6_CFLAGS@
326XAW6_LIBS = @XAW6_LIBS@
327XAW7_CFLAGS = @XAW7_CFLAGS@
328XAW7_LIBS = @XAW7_LIBS@
329XMLTO = @XMLTO@
330XORG_MAN_PAGE = @XORG_MAN_PAGE@
331XORG_SGML_PATH = @XORG_SGML_PATH@
332XSLTPROC = @XSLTPROC@
333XSL_STYLESHEET = @XSL_STYLESHEET@
334abs_builddir = @abs_builddir@
335abs_srcdir = @abs_srcdir@
336abs_top_builddir = @abs_top_builddir@
337abs_top_srcdir = @abs_top_srcdir@
338ac_ct_AR = @ac_ct_AR@
339ac_ct_CC = @ac_ct_CC@
340ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
341am__include = @am__include@
342am__leading_dot = @am__leading_dot@
343am__quote = @am__quote@
344am__tar = @am__tar@
345am__untar = @am__untar@
346bindir = @bindir@
347build = @build@
348build_alias = @build_alias@
349build_cpu = @build_cpu@
350build_os = @build_os@
351build_vendor = @build_vendor@
352builddir = @builddir@
353datadir = @datadir@
354datarootdir = @datarootdir@
355docdir = @docdir@
356dvidir = @dvidir@
357exec_prefix = @exec_prefix@
358host = @host@
359host_alias = @host_alias@
360host_cpu = @host_cpu@
361host_os = @host_os@
362host_vendor = @host_vendor@
363htmldir = @htmldir@
364includedir = @includedir@
365infodir = @infodir@
366install_sh = @install_sh@
367libdir = @libdir@
368libexecdir = @libexecdir@
369localedir = @localedir@
370localstatedir = @localstatedir@
371mandir = @mandir@
372mkdir_p = @mkdir_p@
373oldincludedir = @oldincludedir@
374pdfdir = @pdfdir@
375prefix = @prefix@
376program_transform_name = @program_transform_name@
377psdir = @psdir@
378runstatedir = @runstatedir@
379sbindir = @sbindir@
380sharedstatedir = @sharedstatedir@
381srcdir = @srcdir@
382sysconfdir = @sysconfdir@
383target_alias = @target_alias@
384top_build_prefix = @top_build_prefix@
385top_builddir = @top_builddir@
386top_srcdir = @top_srcdir@
387SUBDIRS = include src man specs
388pkgconfigdir = $(libdir)/pkgconfig
389pkgconfig_DATA = $(am__append_1) $(am__append_2)
390@BUILD_XAW6_TRUE@@PLATFORM_DARWIN_FALSE@DEFAULT_LIB = libXaw6.@LIBEXT@
391@BUILD_XAW6_TRUE@@PLATFORM_DARWIN_TRUE@DEFAULT_LIB = libXaw.6.@LIBEXT@
392@BUILD_XAW7_TRUE@@PLATFORM_DARWIN_FALSE@DEFAULT_LIB = libXaw7.@LIBEXT@
393@BUILD_XAW7_TRUE@@PLATFORM_DARWIN_TRUE@DEFAULT_LIB = libXaw.7.@LIBEXT@
394MAINTAINERCLEANFILES = ChangeLog INSTALL
395EXTRA_DIST = \
396	README.md	   \
397        autogen.sh	   \
398	old-doc/Changelog  \
399	old-doc/CHANGES
400
401all: config.h
402	$(MAKE) $(AM_MAKEFLAGS) all-recursive
403
404.SUFFIXES:
405am--refresh: Makefile
406	@:
407$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
408	@for dep in $?; do \
409	  case '$(am__configure_deps)' in \
410	    *$$dep*) \
411	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
412	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
413		&& exit 0; \
414	      exit 1;; \
415	  esac; \
416	done; \
417	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
418	$(am__cd) $(top_srcdir) && \
419	  $(AUTOMAKE) --foreign Makefile
420Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
421	@case '$?' in \
422	  *config.status*) \
423	    echo ' $(SHELL) ./config.status'; \
424	    $(SHELL) ./config.status;; \
425	  *) \
426	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
427	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
428	esac;
429
430$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
431	$(SHELL) ./config.status --recheck
432
433$(top_srcdir)/configure:  $(am__configure_deps)
434	$(am__cd) $(srcdir) && $(AUTOCONF)
435$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
436	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
437$(am__aclocal_m4_deps):
438
439config.h: stamp-h1
440	@test -f $@ || rm -f stamp-h1
441	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
442
443stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
444	@rm -f stamp-h1
445	cd $(top_builddir) && $(SHELL) ./config.status config.h
446$(srcdir)/config.h.in:  $(am__configure_deps) 
447	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
448	rm -f stamp-h1
449	touch $@
450
451distclean-hdr:
452	-rm -f config.h stamp-h1
453xaw6.pc: $(top_builddir)/config.status $(srcdir)/xaw6.pc.in
454	cd $(top_builddir) && $(SHELL) ./config.status $@
455xaw7.pc: $(top_builddir)/config.status $(srcdir)/xaw7.pc.in
456	cd $(top_builddir) && $(SHELL) ./config.status $@
457
458mostlyclean-libtool:
459	-rm -f *.lo
460
461clean-libtool:
462	-rm -rf .libs _libs
463
464distclean-libtool:
465	-rm -f libtool config.lt
466install-pkgconfigDATA: $(pkgconfig_DATA)
467	@$(NORMAL_INSTALL)
468	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
469	if test -n "$$list"; then \
470	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
471	  $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
472	fi; \
473	for p in $$list; do \
474	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
475	  echo "$$d$$p"; \
476	done | $(am__base_list) | \
477	while read files; do \
478	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
479	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
480	done
481
482uninstall-pkgconfigDATA:
483	@$(NORMAL_UNINSTALL)
484	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
485	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
486	dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
487
488# This directory's subdirectories are mostly independent; you can cd
489# into them and run 'make' without going through this Makefile.
490# To change the values of 'make' variables: instead of editing Makefiles,
491# (1) if the variable is set in 'config.status', edit 'config.status'
492#     (which will cause the Makefiles to be regenerated when you run 'make');
493# (2) otherwise, pass the desired values on the 'make' command line.
494$(am__recursive_targets):
495	@fail=; \
496	if $(am__make_keepgoing); then \
497	  failcom='fail=yes'; \
498	else \
499	  failcom='exit 1'; \
500	fi; \
501	dot_seen=no; \
502	target=`echo $@ | sed s/-recursive//`; \
503	case "$@" in \
504	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
505	  *) list='$(SUBDIRS)' ;; \
506	esac; \
507	for subdir in $$list; do \
508	  echo "Making $$target in $$subdir"; \
509	  if test "$$subdir" = "."; then \
510	    dot_seen=yes; \
511	    local_target="$$target-am"; \
512	  else \
513	    local_target="$$target"; \
514	  fi; \
515	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
516	  || eval $$failcom; \
517	done; \
518	if test "$$dot_seen" = "no"; then \
519	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
520	fi; test -z "$$fail"
521
522ID: $(am__tagged_files)
523	$(am__define_uniq_tagged_files); mkid -fID $$unique
524tags: tags-recursive
525TAGS: tags
526
527tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
528	set x; \
529	here=`pwd`; \
530	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
531	  include_option=--etags-include; \
532	  empty_fix=.; \
533	else \
534	  include_option=--include; \
535	  empty_fix=; \
536	fi; \
537	list='$(SUBDIRS)'; for subdir in $$list; do \
538	  if test "$$subdir" = .; then :; else \
539	    test ! -f $$subdir/TAGS || \
540	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
541	  fi; \
542	done; \
543	$(am__define_uniq_tagged_files); \
544	shift; \
545	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
546	  test -n "$$unique" || unique=$$empty_fix; \
547	  if test $$# -gt 0; then \
548	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
549	      "$$@" $$unique; \
550	  else \
551	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
552	      $$unique; \
553	  fi; \
554	fi
555ctags: ctags-recursive
556
557CTAGS: ctags
558ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
559	$(am__define_uniq_tagged_files); \
560	test -z "$(CTAGS_ARGS)$$unique" \
561	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
562	     $$unique
563
564GTAGS:
565	here=`$(am__cd) $(top_builddir) && pwd` \
566	  && $(am__cd) $(top_srcdir) \
567	  && gtags -i $(GTAGS_ARGS) "$$here"
568cscope: cscope.files
569	test ! -s cscope.files \
570	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
571clean-cscope:
572	-rm -f cscope.files
573cscope.files: clean-cscope cscopelist
574cscopelist: cscopelist-recursive
575
576cscopelist-am: $(am__tagged_files)
577	list='$(am__tagged_files)'; \
578	case "$(srcdir)" in \
579	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
580	  *) sdir=$(subdir)/$(srcdir) ;; \
581	esac; \
582	for i in $$list; do \
583	  if test -f "$$i"; then \
584	    echo "$(subdir)/$$i"; \
585	  else \
586	    echo "$$sdir/$$i"; \
587	  fi; \
588	done >> $(top_builddir)/cscope.files
589
590distclean-tags:
591	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
592	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
593
594distdir: $(BUILT_SOURCES)
595	$(MAKE) $(AM_MAKEFLAGS) distdir-am
596
597distdir-am: $(DISTFILES)
598	$(am__remove_distdir)
599	test -d "$(distdir)" || mkdir "$(distdir)"
600	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
601	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
602	list='$(DISTFILES)'; \
603	  dist_files=`for file in $$list; do echo $$file; done | \
604	  sed -e "s|^$$srcdirstrip/||;t" \
605	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
606	case $$dist_files in \
607	  */*) $(MKDIR_P) `echo "$$dist_files" | \
608			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
609			   sort -u` ;; \
610	esac; \
611	for file in $$dist_files; do \
612	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
613	  if test -d $$d/$$file; then \
614	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
615	    if test -d "$(distdir)/$$file"; then \
616	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
617	    fi; \
618	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
619	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
620	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
621	    fi; \
622	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
623	  else \
624	    test -f "$(distdir)/$$file" \
625	    || cp -p $$d/$$file "$(distdir)/$$file" \
626	    || exit 1; \
627	  fi; \
628	done
629	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
630	  if test "$$subdir" = .; then :; else \
631	    $(am__make_dryrun) \
632	      || test -d "$(distdir)/$$subdir" \
633	      || $(MKDIR_P) "$(distdir)/$$subdir" \
634	      || exit 1; \
635	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
636	    $(am__relativize); \
637	    new_distdir=$$reldir; \
638	    dir1=$$subdir; dir2="$(top_distdir)"; \
639	    $(am__relativize); \
640	    new_top_distdir=$$reldir; \
641	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
642	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
643	    ($(am__cd) $$subdir && \
644	      $(MAKE) $(AM_MAKEFLAGS) \
645	        top_distdir="$$new_top_distdir" \
646	        distdir="$$new_distdir" \
647		am__remove_distdir=: \
648		am__skip_length_check=: \
649		am__skip_mode_fix=: \
650	        distdir) \
651	      || exit 1; \
652	  fi; \
653	done
654	$(MAKE) $(AM_MAKEFLAGS) \
655	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
656	  dist-hook
657	-test -n "$(am__skip_mode_fix)" \
658	|| find "$(distdir)" -type d ! -perm -755 \
659		-exec chmod u+rwx,go+rx {} \; -o \
660	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
661	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
662	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
663	|| chmod -R a+r "$(distdir)"
664dist-gzip: distdir
665	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
666	$(am__post_remove_distdir)
667dist-bzip2: distdir
668	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
669	$(am__post_remove_distdir)
670
671dist-lzip: distdir
672	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
673	$(am__post_remove_distdir)
674
675dist-xz: distdir
676	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
677	$(am__post_remove_distdir)
678
679dist-zstd: distdir
680	tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
681	$(am__post_remove_distdir)
682
683dist-tarZ: distdir
684	@echo WARNING: "Support for distribution archives compressed with" \
685		       "legacy program 'compress' is deprecated." >&2
686	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
687	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
688	$(am__post_remove_distdir)
689
690dist-shar: distdir
691	@echo WARNING: "Support for shar distribution archives is" \
692	               "deprecated." >&2
693	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
694	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
695	$(am__post_remove_distdir)
696
697dist-zip: distdir
698	-rm -f $(distdir).zip
699	zip -rq $(distdir).zip $(distdir)
700	$(am__post_remove_distdir)
701
702dist dist-all:
703	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
704	$(am__post_remove_distdir)
705
706# This target untars the dist file and tries a VPATH configuration.  Then
707# it guarantees that the distribution is self-contained by making another
708# tarfile.
709distcheck: dist
710	case '$(DIST_ARCHIVES)' in \
711	*.tar.gz*) \
712	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
713	*.tar.bz2*) \
714	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
715	*.tar.lz*) \
716	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
717	*.tar.xz*) \
718	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
719	*.tar.Z*) \
720	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
721	*.shar.gz*) \
722	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
723	*.zip*) \
724	  unzip $(distdir).zip ;;\
725	*.tar.zst*) \
726	  zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
727	esac
728	chmod -R a-w $(distdir)
729	chmod u+w $(distdir)
730	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
731	chmod a-w $(distdir)
732	test -d $(distdir)/_build || exit 0; \
733	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
734	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
735	  && am__cwd=`pwd` \
736	  && $(am__cd) $(distdir)/_build/sub \
737	  && ../../configure \
738	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
739	    $(DISTCHECK_CONFIGURE_FLAGS) \
740	    --srcdir=../.. --prefix="$$dc_install_base" \
741	  && $(MAKE) $(AM_MAKEFLAGS) \
742	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
743	  && $(MAKE) $(AM_MAKEFLAGS) check \
744	  && $(MAKE) $(AM_MAKEFLAGS) install \
745	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
746	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
747	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
748	        distuninstallcheck \
749	  && chmod -R a-w "$$dc_install_base" \
750	  && ({ \
751	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
752	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
753	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
754	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
755	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
756	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
757	  && rm -rf "$$dc_destdir" \
758	  && $(MAKE) $(AM_MAKEFLAGS) dist \
759	  && rm -rf $(DIST_ARCHIVES) \
760	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
761	  && cd "$$am__cwd" \
762	  || exit 1
763	$(am__post_remove_distdir)
764	@(echo "$(distdir) archives ready for distribution: "; \
765	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
766	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
767distuninstallcheck:
768	@test -n '$(distuninstallcheck_dir)' || { \
769	  echo 'ERROR: trying to run $@ with an empty' \
770	       '$$(distuninstallcheck_dir)' >&2; \
771	  exit 1; \
772	}; \
773	$(am__cd) '$(distuninstallcheck_dir)' || { \
774	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
775	  exit 1; \
776	}; \
777	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
778	   || { echo "ERROR: files left after uninstall:" ; \
779	        if test -n "$(DESTDIR)"; then \
780	          echo "  (check DESTDIR support)"; \
781	        fi ; \
782	        $(distuninstallcheck_listfiles) ; \
783	        exit 1; } >&2
784distcleancheck: distclean
785	@if test '$(srcdir)' = . ; then \
786	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
787	  exit 1 ; \
788	fi
789	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
790	  || { echo "ERROR: files left in build directory after distclean:" ; \
791	       $(distcleancheck_listfiles) ; \
792	       exit 1; } >&2
793check-am: all-am
794check: check-recursive
795all-am: Makefile $(DATA) config.h
796installdirs: installdirs-recursive
797installdirs-am:
798	for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
799	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
800	done
801install: install-recursive
802install-exec: install-exec-recursive
803install-data: install-data-recursive
804uninstall: uninstall-recursive
805
806install-am: all-am
807	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
808
809installcheck: installcheck-recursive
810install-strip:
811	if test -z '$(STRIP)'; then \
812	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
813	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
814	      install; \
815	else \
816	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
817	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
818	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
819	fi
820mostlyclean-generic:
821
822clean-generic:
823
824distclean-generic:
825	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
826	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
827
828maintainer-clean-generic:
829	@echo "This command is intended for maintainers to use"
830	@echo "it deletes files that may require special tools to rebuild."
831	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
832clean: clean-recursive
833
834clean-am: clean-generic clean-libtool mostlyclean-am
835
836distclean: distclean-recursive
837	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
838	-rm -f Makefile
839distclean-am: clean-am distclean-generic distclean-hdr \
840	distclean-libtool distclean-tags
841
842dvi: dvi-recursive
843
844dvi-am:
845
846html: html-recursive
847
848html-am:
849
850info: info-recursive
851
852info-am:
853
854install-data-am: install-pkgconfigDATA
855
856install-dvi: install-dvi-recursive
857
858install-dvi-am:
859
860install-exec-am:
861	@$(NORMAL_INSTALL)
862	$(MAKE) $(AM_MAKEFLAGS) install-exec-hook
863install-html: install-html-recursive
864
865install-html-am:
866
867install-info: install-info-recursive
868
869install-info-am:
870
871install-man:
872
873install-pdf: install-pdf-recursive
874
875install-pdf-am:
876
877install-ps: install-ps-recursive
878
879install-ps-am:
880
881installcheck-am:
882
883maintainer-clean: maintainer-clean-recursive
884	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
885	-rm -rf $(top_srcdir)/autom4te.cache
886	-rm -f Makefile
887maintainer-clean-am: distclean-am maintainer-clean-generic
888
889mostlyclean: mostlyclean-recursive
890
891mostlyclean-am: mostlyclean-generic mostlyclean-libtool
892
893pdf: pdf-recursive
894
895pdf-am:
896
897ps: ps-recursive
898
899ps-am:
900
901uninstall-am: uninstall-local uninstall-pkgconfigDATA
902
903.MAKE: $(am__recursive_targets) all install-am install-exec-am \
904	install-strip
905
906.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
907	am--refresh check check-am clean clean-cscope clean-generic \
908	clean-libtool cscope cscopelist-am ctags ctags-am dist \
909	dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
910	dist-tarZ dist-xz dist-zip dist-zstd distcheck distclean \
911	distclean-generic distclean-hdr distclean-libtool \
912	distclean-tags distcleancheck distdir distuninstallcheck dvi \
913	dvi-am html html-am info info-am install install-am \
914	install-data install-data-am install-dvi install-dvi-am \
915	install-exec install-exec-am install-exec-hook install-html \
916	install-html-am install-info install-info-am install-man \
917	install-pdf install-pdf-am install-pkgconfigDATA install-ps \
918	install-ps-am install-strip installcheck installcheck-am \
919	installdirs installdirs-am maintainer-clean \
920	maintainer-clean-generic mostlyclean mostlyclean-generic \
921	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
922	uninstall-am uninstall-local uninstall-pkgconfigDATA
923
924.PRECIOUS: Makefile
925
926
927install-exec-hook:
928	cd $(DESTDIR)$(libdir) && rm -f libXaw.@LIBEXT@ && $(LN_S) $(DEFAULT_LIB) libXaw.@LIBEXT@
929
930uninstall-local:
931	-rm -f $(DESTDIR)$(libdir)/libXaw.@LIBEXT@
932
933.PHONY: ChangeLog INSTALL
934
935INSTALL:
936	$(INSTALL_CMD)
937
938ChangeLog:
939	$(CHANGELOG_CMD)
940
941dist-hook: ChangeLog INSTALL
942
943# Tell versions [3.59,3.63) of GNU make to not export all variables.
944# Otherwise a system limit (for SysV at least) may be exceeded.
945.NOEXPORT:
946