Makefile.in revision c8571806 
1# Makefile.in generated by automake 1.15 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2014 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17VPATH = @srcdir@
18am__is_gnu_make = { \
19  if test -z '$(MAKELEVEL)'; then \
20    false; \
21  elif test -n '$(MAKE_HOST)'; then \
22    true; \
23  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
24    true; \
25  else \
26    false; \
27  fi; \
28}
29am__make_running_with_option = \
30  case $${target_option-} in \
31      ?) ;; \
32      *) echo "am__make_running_with_option: internal error: invalid" \
33              "target option '$${target_option-}' specified" >&2; \
34         exit 1;; \
35  esac; \
36  has_opt=no; \
37  sane_makeflags=$$MAKEFLAGS; \
38  if $(am__is_gnu_make); then \
39    sane_makeflags=$$MFLAGS; \
40  else \
41    case $$MAKEFLAGS in \
42      *\\[\ \	]*) \
43        bs=\\; \
44        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
45          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
46    esac; \
47  fi; \
48  skip_next=no; \
49  strip_trailopt () \
50  { \
51    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
52  }; \
53  for flg in $$sane_makeflags; do \
54    test $$skip_next = yes && { skip_next=no; continue; }; \
55    case $$flg in \
56      *=*|--*) continue;; \
57        -*I) strip_trailopt 'I'; skip_next=yes;; \
58      -*I?*) strip_trailopt 'I';; \
59        -*O) strip_trailopt 'O'; skip_next=yes;; \
60      -*O?*) strip_trailopt 'O';; \
61        -*l) strip_trailopt 'l'; skip_next=yes;; \
62      -*l?*) strip_trailopt 'l';; \
63      -[dEDm]) skip_next=yes;; \
64      -[JT]) skip_next=yes;; \
65    esac; \
66    case $$flg in \
67      *$$target_option*) has_opt=yes; break;; \
68    esac; \
69  done; \
70  test $$has_opt = yes
71am__make_dryrun = (target_option=n; $(am__make_running_with_option))
72am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
73pkgdatadir = $(datadir)/@PACKAGE@
74pkgincludedir = $(includedir)/@PACKAGE@
75pkglibdir = $(libdir)/@PACKAGE@
76pkglibexecdir = $(libexecdir)/@PACKAGE@
77am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
78install_sh_DATA = $(install_sh) -c -m 644
79install_sh_PROGRAM = $(install_sh) -c
80install_sh_SCRIPT = $(install_sh) -c
81INSTALL_HEADER = $(INSTALL_DATA)
82transform = $(program_transform_name)
83NORMAL_INSTALL = :
84PRE_INSTALL = :
85POST_INSTALL = :
86NORMAL_UNINSTALL = :
87PRE_UNINSTALL = :
88POST_UNINSTALL = :
89build_triplet = @build@
90host_triplet = @host@
91@BUILD_XAW6_TRUE@am__append_1 = xaw6.pc
92@BUILD_XAW7_TRUE@am__append_2 = xaw7.pc
93subdir = .
94ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
95am__aclocal_m4_deps = $(top_srcdir)/configure.ac
96am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
97	$(ACLOCAL_M4)
98DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
99	$(am__configure_deps) $(am__DIST_COMMON)
100am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
101 configure.lineno config.status.lineno
102mkinstalldirs = $(install_sh) -d
103CONFIG_HEADER = config.h
104CONFIG_CLEAN_FILES = xaw6.pc xaw7.pc
105CONFIG_CLEAN_VPATH_FILES =
106AM_V_P = $(am__v_P_@AM_V@)
107am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
108am__v_P_0 = false
109am__v_P_1 = :
110AM_V_GEN = $(am__v_GEN_@AM_V@)
111am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
112am__v_GEN_0 = @echo "  GEN     " $@;
113am__v_GEN_1 = 
114AM_V_at = $(am__v_at_@AM_V@)
115am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
116am__v_at_0 = @
117am__v_at_1 = 
118SOURCES =
119DIST_SOURCES =
120RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
121	ctags-recursive dvi-recursive html-recursive info-recursive \
122	install-data-recursive install-dvi-recursive \
123	install-exec-recursive install-html-recursive \
124	install-info-recursive install-pdf-recursive \
125	install-ps-recursive install-recursive installcheck-recursive \
126	installdirs-recursive pdf-recursive ps-recursive \
127	tags-recursive uninstall-recursive
128am__can_run_installinfo = \
129  case $$AM_UPDATE_INFO_DIR in \
130    n|no|NO) false;; \
131    *) (install-info --version) >/dev/null 2>&1;; \
132  esac
133am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
134am__vpath_adj = case $$p in \
135    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
136    *) f=$$p;; \
137  esac;
138am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
139am__install_max = 40
140am__nobase_strip_setup = \
141  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
142am__nobase_strip = \
143  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
144am__nobase_list = $(am__nobase_strip_setup); \
145  for p in $$list; do echo "$$p $$p"; done | \
146  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
147  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
148    if (++n[$$2] == $(am__install_max)) \
149      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
150    END { for (dir in files) print dir, files[dir] }'
151am__base_list = \
152  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
153  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
154am__uninstall_files_from_dir = { \
155  test -z "$$files" \
156    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
157    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
158         $(am__cd) "$$dir" && rm -f $$files; }; \
159  }
160am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
161DATA = $(pkgconfig_DATA)
162RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
163  distclean-recursive maintainer-clean-recursive
164am__recursive_targets = \
165  $(RECURSIVE_TARGETS) \
166  $(RECURSIVE_CLEAN_TARGETS) \
167  $(am__extra_recursive_targets)
168AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
169	cscope distdir dist dist-all distcheck
170am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
171	$(LISP)config.h.in
172# Read a list of newline-separated strings from the standard input,
173# and print each of them once, without duplicates.  Input order is
174# *not* preserved.
175am__uniquify_input = $(AWK) '\
176  BEGIN { nonempty = 0; } \
177  { items[$$0] = 1; nonempty = 1; } \
178  END { if (nonempty) { for (i in items) print i; }; } \
179'
180# Make sure the list of sources is unique.  This is necessary because,
181# e.g., the same source file might be shared among _SOURCES variables
182# for different programs/libraries.
183am__define_uniq_tagged_files = \
184  list='$(am__tagged_files)'; \
185  unique=`for i in $$list; do \
186    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
187  done | $(am__uniquify_input)`
188ETAGS = etags
189CTAGS = ctags
190CSCOPE = cscope
191DIST_SUBDIRS = $(SUBDIRS)
192am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
193	$(srcdir)/xaw6.pc.in $(srcdir)/xaw7.pc.in COPYING ChangeLog \
194	INSTALL README compile config.guess config.sub install-sh \
195	ltmain.sh missing
196DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
197distdir = $(PACKAGE)-$(VERSION)
198top_distdir = $(distdir)
199am__remove_distdir = \
200  if test -d "$(distdir)"; then \
201    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
202      && rm -rf "$(distdir)" \
203      || { sleep 5 && rm -rf "$(distdir)"; }; \
204  else :; fi
205am__post_remove_distdir = $(am__remove_distdir)
206am__relativize = \
207  dir0=`pwd`; \
208  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
209  sed_rest='s,^[^/]*/*,,'; \
210  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
211  sed_butlast='s,/*[^/]*$$,,'; \
212  while test -n "$$dir1"; do \
213    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
214    if test "$$first" != "."; then \
215      if test "$$first" = ".."; then \
216        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
217        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
218      else \
219        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
220        if test "$$first2" = "$$first"; then \
221          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
222        else \
223          dir2="../$$dir2"; \
224        fi; \
225        dir0="$$dir0"/"$$first"; \
226      fi; \
227    fi; \
228    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
229  done; \
230  reldir="$$dir2"
231DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
232GZIP_ENV = --best
233DIST_TARGETS = dist-bzip2 dist-gzip
234distuninstallcheck_listfiles = find . -type f -print
235am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
236  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
237distcleancheck_listfiles = find . -type f -print
238ACLOCAL = @ACLOCAL@
239ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
240ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
241AMTAR = @AMTAR@
242AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
243APP_MAN_DIR = @APP_MAN_DIR@
244APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
245AR = @AR@
246AUTOCONF = @AUTOCONF@
247AUTOHEADER = @AUTOHEADER@
248AUTOMAKE = @AUTOMAKE@
249AWK = @AWK@
250BASE_CFLAGS = @BASE_CFLAGS@
251CC = @CC@
252CCDEPMODE = @CCDEPMODE@
253CFLAGS = @CFLAGS@
254CHANGELOG_CMD = @CHANGELOG_CMD@
255CPP = @CPP@
256CPPFLAGS = @CPPFLAGS@
257CWARNFLAGS = @CWARNFLAGS@
258CYGPATH_W = @CYGPATH_W@
259DEFS = @DEFS@
260DEPDIR = @DEPDIR@
261DLLTOOL = @DLLTOOL@
262DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
263DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
264DSYMUTIL = @DSYMUTIL@
265DUMPBIN = @DUMPBIN@
266ECHO_C = @ECHO_C@
267ECHO_N = @ECHO_N@
268ECHO_T = @ECHO_T@
269EGREP = @EGREP@
270EXEEXT = @EXEEXT@
271FGREP = @FGREP@
272FILE_MAN_DIR = @FILE_MAN_DIR@
273FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
274FOP = @FOP@
275GREP = @GREP@
276INSTALL = @INSTALL@
277INSTALL_CMD = @INSTALL_CMD@
278INSTALL_DATA = @INSTALL_DATA@
279INSTALL_PROGRAM = @INSTALL_PROGRAM@
280INSTALL_SCRIPT = @INSTALL_SCRIPT@
281INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
282LD = @LD@
283LDFLAGS = @LDFLAGS@
284LIBEXT = @LIBEXT@
285LIBOBJS = @LIBOBJS@
286LIBS = @LIBS@
287LIBTOOL = @LIBTOOL@
288LIB_MAN_DIR = @LIB_MAN_DIR@
289LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
290LIPO = @LIPO@
291LN_S = @LN_S@
292LTLIBOBJS = @LTLIBOBJS@
293MAKEINFO = @MAKEINFO@
294MANIFEST_TOOL = @MANIFEST_TOOL@
295MAN_SUBSTS = @MAN_SUBSTS@
296MISC_MAN_DIR = @MISC_MAN_DIR@
297MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
298MKDIR_P = @MKDIR_P@
299NM = @NM@
300NMEDIT = @NMEDIT@
301OBJDUMP = @OBJDUMP@
302OBJEXT = @OBJEXT@
303OTOOL = @OTOOL@
304OTOOL64 = @OTOOL64@
305PACKAGE = @PACKAGE@
306PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
307PACKAGE_NAME = @PACKAGE_NAME@
308PACKAGE_STRING = @PACKAGE_STRING@
309PACKAGE_TARNAME = @PACKAGE_TARNAME@
310PACKAGE_URL = @PACKAGE_URL@
311PACKAGE_VERSION = @PACKAGE_VERSION@
312PATH_SEPARATOR = @PATH_SEPARATOR@
313PKG_CONFIG = @PKG_CONFIG@
314RANLIB = @RANLIB@
315SED = @SED@
316SET_MAKE = @SET_MAKE@
317SHELL = @SHELL@
318STRICT_CFLAGS = @STRICT_CFLAGS@
319STRIP = @STRIP@
320STYLESHEET_SRCDIR = @STYLESHEET_SRCDIR@
321VERSION = @VERSION@
322XAW6_CFLAGS = @XAW6_CFLAGS@
323XAW6_LIBS = @XAW6_LIBS@
324XAW7_CFLAGS = @XAW7_CFLAGS@
325XAW7_LIBS = @XAW7_LIBS@
326XMLTO = @XMLTO@
327XORG_MAN_PAGE = @XORG_MAN_PAGE@
328XORG_SGML_PATH = @XORG_SGML_PATH@
329XSLTPROC = @XSLTPROC@
330XSL_STYLESHEET = @XSL_STYLESHEET@
331abs_builddir = @abs_builddir@
332abs_srcdir = @abs_srcdir@
333abs_top_builddir = @abs_top_builddir@
334abs_top_srcdir = @abs_top_srcdir@
335ac_ct_AR = @ac_ct_AR@
336ac_ct_CC = @ac_ct_CC@
337ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
338am__include = @am__include@
339am__leading_dot = @am__leading_dot@
340am__quote = @am__quote@
341am__tar = @am__tar@
342am__untar = @am__untar@
343bindir = @bindir@
344build = @build@
345build_alias = @build_alias@
346build_cpu = @build_cpu@
347build_os = @build_os@
348build_vendor = @build_vendor@
349builddir = @builddir@
350datadir = @datadir@
351datarootdir = @datarootdir@
352docdir = @docdir@
353dvidir = @dvidir@
354exec_prefix = @exec_prefix@
355host = @host@
356host_alias = @host_alias@
357host_cpu = @host_cpu@
358host_os = @host_os@
359host_vendor = @host_vendor@
360htmldir = @htmldir@
361includedir = @includedir@
362infodir = @infodir@
363install_sh = @install_sh@
364libdir = @libdir@
365libexecdir = @libexecdir@
366localedir = @localedir@
367localstatedir = @localstatedir@
368mandir = @mandir@
369mkdir_p = @mkdir_p@
370oldincludedir = @oldincludedir@
371pdfdir = @pdfdir@
372prefix = @prefix@
373program_transform_name = @program_transform_name@
374psdir = @psdir@
375sbindir = @sbindir@
376sharedstatedir = @sharedstatedir@
377srcdir = @srcdir@
378sysconfdir = @sysconfdir@
379target_alias = @target_alias@
380top_build_prefix = @top_build_prefix@
381top_builddir = @top_builddir@
382top_srcdir = @top_srcdir@
383SUBDIRS = include src man specs
384pkgconfigdir = $(libdir)/pkgconfig
385pkgconfig_DATA = $(am__append_1) $(am__append_2)
386@BUILD_XAW6_TRUE@@PLATFORM_DARWIN_FALSE@DEFAULT_LIB = libXaw6.@LIBEXT@
387@BUILD_XAW6_TRUE@@PLATFORM_DARWIN_TRUE@DEFAULT_LIB = libXaw.6.@LIBEXT@
388@BUILD_XAW7_TRUE@@PLATFORM_DARWIN_FALSE@DEFAULT_LIB = libXaw7.@LIBEXT@
389@BUILD_XAW7_TRUE@@PLATFORM_DARWIN_TRUE@DEFAULT_LIB = libXaw.7.@LIBEXT@
390MAINTAINERCLEANFILES = ChangeLog INSTALL
391EXTRA_DIST = \
392        autogen.sh	   \
393	old-doc/Changelog  \
394	old-doc/CHANGES
395
396all: config.h
397	$(MAKE) $(AM_MAKEFLAGS) all-recursive
398
399.SUFFIXES:
400am--refresh: Makefile
401	@:
402$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
403	@for dep in $?; do \
404	  case '$(am__configure_deps)' in \
405	    *$$dep*) \
406	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
407	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
408		&& exit 0; \
409	      exit 1;; \
410	  esac; \
411	done; \
412	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
413	$(am__cd) $(top_srcdir) && \
414	  $(AUTOMAKE) --foreign Makefile
415Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
416	@case '$?' in \
417	  *config.status*) \
418	    echo ' $(SHELL) ./config.status'; \
419	    $(SHELL) ./config.status;; \
420	  *) \
421	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
422	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
423	esac;
424
425$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
426	$(SHELL) ./config.status --recheck
427
428$(top_srcdir)/configure:  $(am__configure_deps)
429	$(am__cd) $(srcdir) && $(AUTOCONF)
430$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
431	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
432$(am__aclocal_m4_deps):
433
434config.h: stamp-h1
435	@test -f $@ || rm -f stamp-h1
436	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
437
438stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
439	@rm -f stamp-h1
440	cd $(top_builddir) && $(SHELL) ./config.status config.h
441$(srcdir)/config.h.in:  $(am__configure_deps) 
442	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
443	rm -f stamp-h1
444	touch $@
445
446distclean-hdr:
447	-rm -f config.h stamp-h1
448xaw6.pc: $(top_builddir)/config.status $(srcdir)/xaw6.pc.in
449	cd $(top_builddir) && $(SHELL) ./config.status $@
450xaw7.pc: $(top_builddir)/config.status $(srcdir)/xaw7.pc.in
451	cd $(top_builddir) && $(SHELL) ./config.status $@
452
453mostlyclean-libtool:
454	-rm -f *.lo
455
456clean-libtool:
457	-rm -rf .libs _libs
458
459distclean-libtool:
460	-rm -f libtool config.lt
461install-pkgconfigDATA: $(pkgconfig_DATA)
462	@$(NORMAL_INSTALL)
463	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
464	if test -n "$$list"; then \
465	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
466	  $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
467	fi; \
468	for p in $$list; do \
469	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
470	  echo "$$d$$p"; \
471	done | $(am__base_list) | \
472	while read files; do \
473	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
474	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
475	done
476
477uninstall-pkgconfigDATA:
478	@$(NORMAL_UNINSTALL)
479	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
480	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
481	dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
482
483# This directory's subdirectories are mostly independent; you can cd
484# into them and run 'make' without going through this Makefile.
485# To change the values of 'make' variables: instead of editing Makefiles,
486# (1) if the variable is set in 'config.status', edit 'config.status'
487#     (which will cause the Makefiles to be regenerated when you run 'make');
488# (2) otherwise, pass the desired values on the 'make' command line.
489$(am__recursive_targets):
490	@fail=; \
491	if $(am__make_keepgoing); then \
492	  failcom='fail=yes'; \
493	else \
494	  failcom='exit 1'; \
495	fi; \
496	dot_seen=no; \
497	target=`echo $@ | sed s/-recursive//`; \
498	case "$@" in \
499	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
500	  *) list='$(SUBDIRS)' ;; \
501	esac; \
502	for subdir in $$list; do \
503	  echo "Making $$target in $$subdir"; \
504	  if test "$$subdir" = "."; then \
505	    dot_seen=yes; \
506	    local_target="$$target-am"; \
507	  else \
508	    local_target="$$target"; \
509	  fi; \
510	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
511	  || eval $$failcom; \
512	done; \
513	if test "$$dot_seen" = "no"; then \
514	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
515	fi; test -z "$$fail"
516
517ID: $(am__tagged_files)
518	$(am__define_uniq_tagged_files); mkid -fID $$unique
519tags: tags-recursive
520TAGS: tags
521
522tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
523	set x; \
524	here=`pwd`; \
525	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
526	  include_option=--etags-include; \
527	  empty_fix=.; \
528	else \
529	  include_option=--include; \
530	  empty_fix=; \
531	fi; \
532	list='$(SUBDIRS)'; for subdir in $$list; do \
533	  if test "$$subdir" = .; then :; else \
534	    test ! -f $$subdir/TAGS || \
535	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
536	  fi; \
537	done; \
538	$(am__define_uniq_tagged_files); \
539	shift; \
540	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
541	  test -n "$$unique" || unique=$$empty_fix; \
542	  if test $$# -gt 0; then \
543	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
544	      "$$@" $$unique; \
545	  else \
546	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
547	      $$unique; \
548	  fi; \
549	fi
550ctags: ctags-recursive
551
552CTAGS: ctags
553ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
554	$(am__define_uniq_tagged_files); \
555	test -z "$(CTAGS_ARGS)$$unique" \
556	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
557	     $$unique
558
559GTAGS:
560	here=`$(am__cd) $(top_builddir) && pwd` \
561	  && $(am__cd) $(top_srcdir) \
562	  && gtags -i $(GTAGS_ARGS) "$$here"
563cscope: cscope.files
564	test ! -s cscope.files \
565	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
566clean-cscope:
567	-rm -f cscope.files
568cscope.files: clean-cscope cscopelist
569cscopelist: cscopelist-recursive
570
571cscopelist-am: $(am__tagged_files)
572	list='$(am__tagged_files)'; \
573	case "$(srcdir)" in \
574	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
575	  *) sdir=$(subdir)/$(srcdir) ;; \
576	esac; \
577	for i in $$list; do \
578	  if test -f "$$i"; then \
579	    echo "$(subdir)/$$i"; \
580	  else \
581	    echo "$$sdir/$$i"; \
582	  fi; \
583	done >> $(top_builddir)/cscope.files
584
585distclean-tags:
586	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
587	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
588
589distdir: $(DISTFILES)
590	$(am__remove_distdir)
591	test -d "$(distdir)" || mkdir "$(distdir)"
592	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
593	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
594	list='$(DISTFILES)'; \
595	  dist_files=`for file in $$list; do echo $$file; done | \
596	  sed -e "s|^$$srcdirstrip/||;t" \
597	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
598	case $$dist_files in \
599	  */*) $(MKDIR_P) `echo "$$dist_files" | \
600			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
601			   sort -u` ;; \
602	esac; \
603	for file in $$dist_files; do \
604	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
605	  if test -d $$d/$$file; then \
606	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
607	    if test -d "$(distdir)/$$file"; then \
608	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
609	    fi; \
610	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
611	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
612	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
613	    fi; \
614	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
615	  else \
616	    test -f "$(distdir)/$$file" \
617	    || cp -p $$d/$$file "$(distdir)/$$file" \
618	    || exit 1; \
619	  fi; \
620	done
621	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
622	  if test "$$subdir" = .; then :; else \
623	    $(am__make_dryrun) \
624	      || test -d "$(distdir)/$$subdir" \
625	      || $(MKDIR_P) "$(distdir)/$$subdir" \
626	      || exit 1; \
627	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
628	    $(am__relativize); \
629	    new_distdir=$$reldir; \
630	    dir1=$$subdir; dir2="$(top_distdir)"; \
631	    $(am__relativize); \
632	    new_top_distdir=$$reldir; \
633	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
634	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
635	    ($(am__cd) $$subdir && \
636	      $(MAKE) $(AM_MAKEFLAGS) \
637	        top_distdir="$$new_top_distdir" \
638	        distdir="$$new_distdir" \
639		am__remove_distdir=: \
640		am__skip_length_check=: \
641		am__skip_mode_fix=: \
642	        distdir) \
643	      || exit 1; \
644	  fi; \
645	done
646	$(MAKE) $(AM_MAKEFLAGS) \
647	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
648	  dist-hook
649	-test -n "$(am__skip_mode_fix)" \
650	|| find "$(distdir)" -type d ! -perm -755 \
651		-exec chmod u+rwx,go+rx {} \; -o \
652	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
653	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
654	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
655	|| chmod -R a+r "$(distdir)"
656dist-gzip: distdir
657	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
658	$(am__post_remove_distdir)
659dist-bzip2: distdir
660	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
661	$(am__post_remove_distdir)
662
663dist-lzip: distdir
664	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
665	$(am__post_remove_distdir)
666
667dist-xz: distdir
668	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
669	$(am__post_remove_distdir)
670
671dist-tarZ: distdir
672	@echo WARNING: "Support for distribution archives compressed with" \
673		       "legacy program 'compress' is deprecated." >&2
674	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
675	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
676	$(am__post_remove_distdir)
677
678dist-shar: distdir
679	@echo WARNING: "Support for shar distribution archives is" \
680	               "deprecated." >&2
681	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
682	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
683	$(am__post_remove_distdir)
684
685dist-zip: distdir
686	-rm -f $(distdir).zip
687	zip -rq $(distdir).zip $(distdir)
688	$(am__post_remove_distdir)
689
690dist dist-all:
691	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
692	$(am__post_remove_distdir)
693
694# This target untars the dist file and tries a VPATH configuration.  Then
695# it guarantees that the distribution is self-contained by making another
696# tarfile.
697distcheck: dist
698	case '$(DIST_ARCHIVES)' in \
699	*.tar.gz*) \
700	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
701	*.tar.bz2*) \
702	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
703	*.tar.lz*) \
704	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
705	*.tar.xz*) \
706	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
707	*.tar.Z*) \
708	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
709	*.shar.gz*) \
710	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
711	*.zip*) \
712	  unzip $(distdir).zip ;;\
713	esac
714	chmod -R a-w $(distdir)
715	chmod u+w $(distdir)
716	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
717	chmod a-w $(distdir)
718	test -d $(distdir)/_build || exit 0; \
719	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
720	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
721	  && am__cwd=`pwd` \
722	  && $(am__cd) $(distdir)/_build/sub \
723	  && ../../configure \
724	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
725	    $(DISTCHECK_CONFIGURE_FLAGS) \
726	    --srcdir=../.. --prefix="$$dc_install_base" \
727	  && $(MAKE) $(AM_MAKEFLAGS) \
728	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
729	  && $(MAKE) $(AM_MAKEFLAGS) check \
730	  && $(MAKE) $(AM_MAKEFLAGS) install \
731	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
732	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
733	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
734	        distuninstallcheck \
735	  && chmod -R a-w "$$dc_install_base" \
736	  && ({ \
737	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
738	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
739	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
740	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
741	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
742	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
743	  && rm -rf "$$dc_destdir" \
744	  && $(MAKE) $(AM_MAKEFLAGS) dist \
745	  && rm -rf $(DIST_ARCHIVES) \
746	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
747	  && cd "$$am__cwd" \
748	  || exit 1
749	$(am__post_remove_distdir)
750	@(echo "$(distdir) archives ready for distribution: "; \
751	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
752	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
753distuninstallcheck:
754	@test -n '$(distuninstallcheck_dir)' || { \
755	  echo 'ERROR: trying to run $@ with an empty' \
756	       '$$(distuninstallcheck_dir)' >&2; \
757	  exit 1; \
758	}; \
759	$(am__cd) '$(distuninstallcheck_dir)' || { \
760	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
761	  exit 1; \
762	}; \
763	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
764	   || { echo "ERROR: files left after uninstall:" ; \
765	        if test -n "$(DESTDIR)"; then \
766	          echo "  (check DESTDIR support)"; \
767	        fi ; \
768	        $(distuninstallcheck_listfiles) ; \
769	        exit 1; } >&2
770distcleancheck: distclean
771	@if test '$(srcdir)' = . ; then \
772	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
773	  exit 1 ; \
774	fi
775	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
776	  || { echo "ERROR: files left in build directory after distclean:" ; \
777	       $(distcleancheck_listfiles) ; \
778	       exit 1; } >&2
779check-am: all-am
780check: check-recursive
781all-am: Makefile $(DATA) config.h
782installdirs: installdirs-recursive
783installdirs-am:
784	for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
785	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
786	done
787install: install-recursive
788install-exec: install-exec-recursive
789install-data: install-data-recursive
790uninstall: uninstall-recursive
791
792install-am: all-am
793	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
794
795installcheck: installcheck-recursive
796install-strip:
797	if test -z '$(STRIP)'; then \
798	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
799	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
800	      install; \
801	else \
802	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
803	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
804	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
805	fi
806mostlyclean-generic:
807
808clean-generic:
809
810distclean-generic:
811	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
812	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
813
814maintainer-clean-generic:
815	@echo "This command is intended for maintainers to use"
816	@echo "it deletes files that may require special tools to rebuild."
817	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
818clean: clean-recursive
819
820clean-am: clean-generic clean-libtool mostlyclean-am
821
822distclean: distclean-recursive
823	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
824	-rm -f Makefile
825distclean-am: clean-am distclean-generic distclean-hdr \
826	distclean-libtool distclean-tags
827
828dvi: dvi-recursive
829
830dvi-am:
831
832html: html-recursive
833
834html-am:
835
836info: info-recursive
837
838info-am:
839
840install-data-am: install-pkgconfigDATA
841
842install-dvi: install-dvi-recursive
843
844install-dvi-am:
845
846install-exec-am:
847	@$(NORMAL_INSTALL)
848	$(MAKE) $(AM_MAKEFLAGS) install-exec-hook
849install-html: install-html-recursive
850
851install-html-am:
852
853install-info: install-info-recursive
854
855install-info-am:
856
857install-man:
858
859install-pdf: install-pdf-recursive
860
861install-pdf-am:
862
863install-ps: install-ps-recursive
864
865install-ps-am:
866
867installcheck-am:
868
869maintainer-clean: maintainer-clean-recursive
870	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
871	-rm -rf $(top_srcdir)/autom4te.cache
872	-rm -f Makefile
873maintainer-clean-am: distclean-am maintainer-clean-generic
874
875mostlyclean: mostlyclean-recursive
876
877mostlyclean-am: mostlyclean-generic mostlyclean-libtool
878
879pdf: pdf-recursive
880
881pdf-am:
882
883ps: ps-recursive
884
885ps-am:
886
887uninstall-am: uninstall-local uninstall-pkgconfigDATA
888
889.MAKE: $(am__recursive_targets) all install-am install-exec-am \
890	install-strip
891
892.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
893	am--refresh check check-am clean clean-cscope clean-generic \
894	clean-libtool cscope cscopelist-am ctags ctags-am dist \
895	dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
896	dist-tarZ dist-xz dist-zip distcheck distclean \
897	distclean-generic distclean-hdr distclean-libtool \
898	distclean-tags distcleancheck distdir distuninstallcheck dvi \
899	dvi-am html html-am info info-am install install-am \
900	install-data install-data-am install-dvi install-dvi-am \
901	install-exec install-exec-am install-exec-hook install-html \
902	install-html-am install-info install-info-am install-man \
903	install-pdf install-pdf-am install-pkgconfigDATA install-ps \
904	install-ps-am install-strip installcheck installcheck-am \
905	installdirs installdirs-am maintainer-clean \
906	maintainer-clean-generic mostlyclean mostlyclean-generic \
907	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
908	uninstall-am uninstall-local uninstall-pkgconfigDATA
909
910.PRECIOUS: Makefile
911
912
913install-exec-hook:
914	cd $(DESTDIR)$(libdir) && rm -f libXaw.@LIBEXT@ && $(LN_S) $(DEFAULT_LIB) libXaw.@LIBEXT@
915
916uninstall-local:
917	-rm -f $(DESTDIR)$(libdir)/libXaw.@LIBEXT@
918
919.PHONY: ChangeLog INSTALL
920
921INSTALL:
922	$(INSTALL_CMD)
923
924ChangeLog:
925	$(CHANGELOG_CMD)
926
927dist-hook: ChangeLog INSTALL
928
929# Tell versions [3.59,3.63) of GNU make to not export all variables.
930# Otherwise a system limit (for SysV at least) may be exceeded.
931.NOEXPORT:
932